| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * linux/drivers/char/ppdev.c | |
| * | |
| * This is the code behind /dev/parport* -- it allows a user-space | |
| * application to use the parport subsystem. | |
| * | |
| * Copyright (C) 1998-2000, 2002 Tim Waugh <tim@cyberelk.net> | |
| * | |
| * A /dev/parportx device node represents an arbitrary device | |
| * on port 'x'. The following operations are possible: | |
| * | |
| * open do nothing, set up default IEEE 1284 protocol to be COMPAT | |
| * close release port and unregister device (if necessary) | |
| * ioctl | |
| * EXCL register device exclusively (may fail) | |
| * CLAIM (register device first time) parport_claim_or_block | |
| * RELEASE parport_release | |
| * SETMODE set the IEEE 1284 protocol to use for read/write | |
| * SETPHASE set the IEEE 1284 phase of a particular mode. Not to be | |
| * confused with ioctl(fd, SETPHASER, &stun). ;-) | |
| * DATADIR data_forward / data_reverse | |
| * WDATA write_data | |
| * RDATA read_data | |
| * WCONTROL write_control | |
| * RCONTROL read_control | |
| * FCONTROL frob_control | |
| * RSTATUS read_status | |
| * NEGOT parport_negotiate | |
| * YIELD parport_yield_blocking | |
| * WCTLONIRQ on interrupt, set control lines | |
| * CLRIRQ clear (and return) interrupt count | |
| * SETTIME sets device timeout (struct timeval) | |
| * GETTIME gets device timeout (struct timeval) | |
| * GETMODES gets hardware supported modes (unsigned int) | |
| * GETMODE gets the current IEEE1284 mode | |
| * GETPHASE gets the current IEEE1284 phase | |
| * GETFLAGS gets current (user-visible) flags | |
| * SETFLAGS sets current (user-visible) flags | |
| * read/write read or write in current IEEE 1284 protocol | |
| * select wait for interrupt (in readfds) | |
| * | |
| * Changes: | |
| * Added SETTIME/GETTIME ioctl, Fred Barnes, 1999. | |
| * | |
| * Arnaldo Carvalho de Melo <acme@conectiva.com.br> 2000/08/25 | |
| * - On error, copy_from_user and copy_to_user do not return -EFAULT, | |
| * They return the positive number of bytes *not* copied due to address | |
| * space errors. | |
| * | |
| * Added GETMODES/GETMODE/GETPHASE ioctls, Fred Barnes <frmb2@ukc.ac.uk>, 03/01/2001. | |
| * Added GETFLAGS/SETFLAGS ioctls, Fred Barnes, 04/2001 | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/sched/signal.h> | |
| #include <linux/device.h> | |
| #include <linux/ioctl.h> | |
| #include <linux/parport.h> | |
| #include <linux/ctype.h> | |
| #include <linux/poll.h> | |
| #include <linux/slab.h> | |
| #include <linux/major.h> | |
| #include <linux/ppdev.h> | |
| #include <linux/mutex.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/compat.h> | |
| #define PP_VERSION "ppdev: user-space parallel port driver" | |
| #define CHRDEV "ppdev" | |
| struct pp_struct { | |
| struct pardevice *pdev; | |
| wait_queue_head_t irq_wait; | |
| atomic_t irqc; | |
| unsigned int flags; | |
| int irqresponse; | |
| unsigned char irqctl; | |
| struct ieee1284_info state; | |
| struct ieee1284_info saved_state; | |
| long default_inactivity; | |
| int index; | |
| }; | |
| /* should we use PARDEVICE_MAX here? */ | |
| static struct device *devices[PARPORT_MAX]; | |
| static DEFINE_IDA(ida_index); | |
| /* pp_struct.flags bitfields */ | |
| #define PP_CLAIMED (1<<0) | |
| #define PP_EXCL (1<<1) | |
| /* Other constants */ | |
| #define PP_INTERRUPT_TIMEOUT (10 * HZ) /* 10s */ | |
| #define PP_BUFFER_SIZE 1024 | |
| #define PARDEVICE_MAX 8 | |
| static DEFINE_MUTEX(pp_do_mutex); | |
| /* define fixed sized ioctl cmd for y2038 migration */ | |
| #define PPGETTIME32 _IOR(PP_IOCTL, 0x95, s32[2]) | |
| #define PPSETTIME32 _IOW(PP_IOCTL, 0x96, s32[2]) | |
| #define PPGETTIME64 _IOR(PP_IOCTL, 0x95, s64[2]) | |
| #define PPSETTIME64 _IOW(PP_IOCTL, 0x96, s64[2]) | |
| static inline void pp_enable_irq(struct pp_struct *pp) | |
| { | |
| struct parport *port = pp->pdev->port; | |
| port->ops->enable_irq(port); | |
| } | |
| static ssize_t pp_read(struct file *file, char __user *buf, size_t count, | |
| loff_t *ppos) | |
| { | |
| unsigned int minor = iminor(file_inode(file)); | |
| struct pp_struct *pp = file->private_data; | |
| char *kbuffer; | |
| ssize_t bytes_read = 0; | |
| struct parport *pport; | |
| int mode; | |
| if (!(pp->flags & PP_CLAIMED)) { | |
| /* Don't have the port claimed */ | |
| pr_debug(CHRDEV "%x: claim the port first\n", minor); | |
| return -EINVAL; | |
| } | |
| /* Trivial case. */ | |
| if (count == 0) | |
| return 0; | |
| kbuffer = kmalloc(min_t(size_t, count, PP_BUFFER_SIZE), GFP_KERNEL); | |
| if (!kbuffer) | |
| return -ENOMEM; | |
| pport = pp->pdev->port; | |
| mode = pport->ieee1284.mode & ~(IEEE1284_DEVICEID | IEEE1284_ADDR); | |
| parport_set_timeout(pp->pdev, | |
| (file->f_flags & O_NONBLOCK) ? | |
| PARPORT_INACTIVITY_O_NONBLOCK : | |
| pp->default_inactivity); | |
| while (bytes_read == 0) { | |
| ssize_t need = min_t(unsigned long, count, PP_BUFFER_SIZE); | |
| if (mode == IEEE1284_MODE_EPP) { | |
| /* various specials for EPP mode */ | |
| int flags = 0; | |
| size_t (*fn)(struct parport *, void *, size_t, int); | |
| if (pp->flags & PP_W91284PIC) | |
| flags |= PARPORT_W91284PIC; | |
| if (pp->flags & PP_FASTREAD) | |
| flags |= PARPORT_EPP_FAST; | |
| if (pport->ieee1284.mode & IEEE1284_ADDR) | |
| fn = pport->ops->epp_read_addr; | |
| else | |
| fn = pport->ops->epp_read_data; | |
| bytes_read = (*fn)(pport, kbuffer, need, flags); | |
| } else { | |
| bytes_read = parport_read(pport, kbuffer, need); | |
| } | |
| if (bytes_read != 0) | |
| break; | |
| if (file->f_flags & O_NONBLOCK) { | |
| bytes_read = -EAGAIN; | |
| break; | |
| } | |
| if (signal_pending(current)) { | |
| bytes_read = -ERESTARTSYS; | |
| break; | |
| } | |
| cond_resched(); | |
| } | |
| parport_set_timeout(pp->pdev, pp->default_inactivity); | |
| if (bytes_read > 0 && copy_to_user(buf, kbuffer, bytes_read)) | |
| bytes_read = -EFAULT; | |
| kfree(kbuffer); | |
| pp_enable_irq(pp); | |
| return bytes_read; | |
| } | |
| static ssize_t pp_write(struct file *file, const char __user *buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| unsigned int minor = iminor(file_inode(file)); | |
| struct pp_struct *pp = file->private_data; | |
| char *kbuffer; | |
| ssize_t bytes_written = 0; | |
| ssize_t wrote; | |
| int mode; | |
| struct parport *pport; | |
| if (!(pp->flags & PP_CLAIMED)) { | |
| /* Don't have the port claimed */ | |
| pr_debug(CHRDEV "%x: claim the port first\n", minor); | |
| return -EINVAL; | |
| } | |
| kbuffer = kmalloc(min_t(size_t, count, PP_BUFFER_SIZE), GFP_KERNEL); | |
| if (!kbuffer) | |
| return -ENOMEM; | |
| pport = pp->pdev->port; | |
| mode = pport->ieee1284.mode & ~(IEEE1284_DEVICEID | IEEE1284_ADDR); | |
| parport_set_timeout(pp->pdev, | |
| (file->f_flags & O_NONBLOCK) ? | |
| PARPORT_INACTIVITY_O_NONBLOCK : | |
| pp->default_inactivity); | |
| while (bytes_written < count) { | |
| ssize_t n = min_t(unsigned long, count - bytes_written, PP_BUFFER_SIZE); | |
| if (copy_from_user(kbuffer, buf + bytes_written, n)) { | |
| bytes_written = -EFAULT; | |
| break; | |
| } | |
| if ((pp->flags & PP_FASTWRITE) && (mode == IEEE1284_MODE_EPP)) { | |
| /* do a fast EPP write */ | |
| if (pport->ieee1284.mode & IEEE1284_ADDR) { | |
| wrote = pport->ops->epp_write_addr(pport, | |
| kbuffer, n, PARPORT_EPP_FAST); | |
| } else { | |
| wrote = pport->ops->epp_write_data(pport, | |
| kbuffer, n, PARPORT_EPP_FAST); | |
| } | |
| } else { | |
| wrote = parport_write(pp->pdev->port, kbuffer, n); | |
| } | |
| if (wrote <= 0) { | |
| if (!bytes_written) | |
| bytes_written = wrote; | |
| break; | |
| } | |
| bytes_written += wrote; | |
| if (file->f_flags & O_NONBLOCK) { | |
| if (!bytes_written) | |
| bytes_written = -EAGAIN; | |
| break; | |
| } | |
| if (signal_pending(current)) | |
| break; | |
| cond_resched(); | |
| } | |
| parport_set_timeout(pp->pdev, pp->default_inactivity); | |
| kfree(kbuffer); | |
| pp_enable_irq(pp); | |
| return bytes_written; | |
| } | |
| static void pp_irq(void *private) | |
| { | |
| struct pp_struct *pp = private; | |
| if (pp->irqresponse) { | |
| parport_write_control(pp->pdev->port, pp->irqctl); | |
| pp->irqresponse = 0; | |
| } | |
| atomic_inc(&pp->irqc); | |
| wake_up_interruptible(&pp->irq_wait); | |
| } | |
| static int register_device(int minor, struct pp_struct *pp) | |
| { | |
| struct parport *port; | |
| struct pardevice *pdev = NULL; | |
| char *name; | |
| struct pardev_cb ppdev_cb; | |
| int rc = 0, index; | |
| name = kasprintf(GFP_KERNEL, CHRDEV "%x", minor); | |
| if (name == NULL) | |
| return -ENOMEM; | |
| port = parport_find_number(minor); | |
| if (!port) { | |
| pr_warn("%s: no associated port!\n", name); | |
| rc = -ENXIO; | |
| goto err_free_name; | |
| } | |
| index = ida_alloc(&ida_index, GFP_KERNEL); | |
| if (index < 0) { | |
| pr_warn("%s: failed to get index!\n", name); | |
| rc = index; | |
| goto err_put_port; | |
| } | |
| memset(&ppdev_cb, 0, sizeof(ppdev_cb)); | |
| ppdev_cb.irq_func = pp_irq; | |
| ppdev_cb.flags = (pp->flags & PP_EXCL) ? PARPORT_FLAG_EXCL : 0; | |
| ppdev_cb.private = pp; | |
| pdev = parport_register_dev_model(port, name, &ppdev_cb, index); | |
| if (!pdev) { | |
| pr_warn("%s: failed to register device!\n", name); | |
| rc = -ENXIO; | |
| ida_free(&ida_index, index); | |
| goto err_put_port; | |
| } | |
| pp->pdev = pdev; | |
| pp->index = index; | |
| dev_dbg(&pdev->dev, "registered pardevice\n"); | |
| err_put_port: | |
| parport_put_port(port); | |
| err_free_name: | |
| kfree(name); | |
| return rc; | |
| } | |
| static enum ieee1284_phase init_phase(int mode) | |
| { | |
| switch (mode & ~(IEEE1284_DEVICEID | |
| | IEEE1284_ADDR)) { | |
| case IEEE1284_MODE_NIBBLE: | |
| case IEEE1284_MODE_BYTE: | |
| return IEEE1284_PH_REV_IDLE; | |
| } | |
| return IEEE1284_PH_FWD_IDLE; | |
| } | |
| static int pp_set_timeout(struct pardevice *pdev, long tv_sec, int tv_usec) | |
| { | |
| long to_jiffies; | |
| if ((tv_sec < 0) || (tv_usec < 0)) | |
| return -EINVAL; | |
| to_jiffies = usecs_to_jiffies(tv_usec); | |
| to_jiffies += tv_sec * HZ; | |
| if (to_jiffies <= 0) | |
| return -EINVAL; | |
| pdev->timeout = to_jiffies; | |
| return 0; | |
| } | |
| static int pp_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg) | |
| { | |
| unsigned int minor = iminor(file_inode(file)); | |
| struct pp_struct *pp = file->private_data; | |
| struct parport *port; | |
| void __user *argp = (void __user *)arg; | |
| struct ieee1284_info *info; | |
| unsigned char reg; | |
| unsigned char mask; | |
| int mode; | |
| s32 time32[2]; | |
| s64 time64[2]; | |
| struct timespec64 ts; | |
| int ret; | |
| /* First handle the cases that don't take arguments. */ | |
| switch (cmd) { | |
| case PPCLAIM: | |
| { | |
| if (pp->flags & PP_CLAIMED) { | |
| dev_dbg(&pp->pdev->dev, "you've already got it!\n"); | |
| return -EINVAL; | |
| } | |
| /* Deferred device registration. */ | |
| if (!pp->pdev) { | |
| int err = register_device(minor, pp); | |
| if (err) | |
| return err; | |
| } | |
| ret = parport_claim_or_block(pp->pdev); | |
| if (ret < 0) | |
| return ret; | |
| pp->flags |= PP_CLAIMED; | |
| /* For interrupt-reporting to work, we need to be | |
| * informed of each interrupt. */ | |
| pp_enable_irq(pp); | |
| /* We may need to fix up the state machine. */ | |
| info = &pp->pdev->port->ieee1284; | |
| pp->saved_state.mode = info->mode; | |
| pp->saved_state.phase = info->phase; | |
| info->mode = pp->state.mode; | |
| info->phase = pp->state.phase; | |
| pp->default_inactivity = parport_set_timeout(pp->pdev, 0); | |
| parport_set_timeout(pp->pdev, pp->default_inactivity); | |
| return 0; | |
| } | |
| case PPEXCL: | |
| if (pp->pdev) { | |
| dev_dbg(&pp->pdev->dev, | |
| "too late for PPEXCL; already registered\n"); | |
| if (pp->flags & PP_EXCL) | |
| /* But it's not really an error. */ | |
| return 0; | |
| /* There's no chance of making the driver happy. */ | |
| return -EINVAL; | |
| } | |
| /* Just remember to register the device exclusively | |
| * when we finally do the registration. */ | |
| pp->flags |= PP_EXCL; | |
| return 0; | |
| case PPSETMODE: | |
| { | |
| int mode; | |
| if (copy_from_user(&mode, argp, sizeof(mode))) | |
| return -EFAULT; | |
| /* FIXME: validate mode */ | |
| pp->state.mode = mode; | |
| pp->state.phase = init_phase(mode); | |
| if (pp->flags & PP_CLAIMED) { | |
| pp->pdev->port->ieee1284.mode = mode; | |
| pp->pdev->port->ieee1284.phase = pp->state.phase; | |
| } | |
| return 0; | |
| } | |
| case PPGETMODE: | |
| { | |
| int mode; | |
| if (pp->flags & PP_CLAIMED) | |
| mode = pp->pdev->port->ieee1284.mode; | |
| else | |
| mode = pp->state.mode; | |
| if (copy_to_user(argp, &mode, sizeof(mode))) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| case PPSETPHASE: | |
| { | |
| int phase; | |
| if (copy_from_user(&phase, argp, sizeof(phase))) | |
| return -EFAULT; | |
| /* FIXME: validate phase */ | |
| pp->state.phase = phase; | |
| if (pp->flags & PP_CLAIMED) | |
| pp->pdev->port->ieee1284.phase = phase; | |
| return 0; | |
| } | |
| case PPGETPHASE: | |
| { | |
| int phase; | |
| if (pp->flags & PP_CLAIMED) | |
| phase = pp->pdev->port->ieee1284.phase; | |
| else | |
| phase = pp->state.phase; | |
| if (copy_to_user(argp, &phase, sizeof(phase))) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| case PPGETMODES: | |
| { | |
| unsigned int modes; | |
| port = parport_find_number(minor); | |
| if (!port) | |
| return -ENODEV; | |
| modes = port->modes; | |
| parport_put_port(port); | |
| if (copy_to_user(argp, &modes, sizeof(modes))) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| case PPSETFLAGS: | |
| { | |
| int uflags; | |
| if (copy_from_user(&uflags, argp, sizeof(uflags))) | |
| return -EFAULT; | |
| pp->flags &= ~PP_FLAGMASK; | |
| pp->flags |= (uflags & PP_FLAGMASK); | |
| return 0; | |
| } | |
| case PPGETFLAGS: | |
| { | |
| int uflags; | |
| uflags = pp->flags & PP_FLAGMASK; | |
| if (copy_to_user(argp, &uflags, sizeof(uflags))) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| } /* end switch() */ | |
| /* Everything else requires the port to be claimed, so check | |
| * that now. */ | |
| if ((pp->flags & PP_CLAIMED) == 0) { | |
| pr_debug(CHRDEV "%x: claim the port first\n", minor); | |
| return -EINVAL; | |
| } | |
| port = pp->pdev->port; | |
| switch (cmd) { | |
| case PPRSTATUS: | |
| reg = parport_read_status(port); | |
| if (copy_to_user(argp, ®, sizeof(reg))) | |
| return -EFAULT; | |
| return 0; | |
| case PPRDATA: | |
| reg = parport_read_data(port); | |
| if (copy_to_user(argp, ®, sizeof(reg))) | |
| return -EFAULT; | |
| return 0; | |
| case PPRCONTROL: | |
| reg = parport_read_control(port); | |
| if (copy_to_user(argp, ®, sizeof(reg))) | |
| return -EFAULT; | |
| return 0; | |
| case PPYIELD: | |
| parport_yield_blocking(pp->pdev); | |
| return 0; | |
| case PPRELEASE: | |
| /* Save the state machine's state. */ | |
| info = &pp->pdev->port->ieee1284; | |
| pp->state.mode = info->mode; | |
| pp->state.phase = info->phase; | |
| info->mode = pp->saved_state.mode; | |
| info->phase = pp->saved_state.phase; | |
| parport_release(pp->pdev); | |
| pp->flags &= ~PP_CLAIMED; | |
| return 0; | |
| case PPWCONTROL: | |
| if (copy_from_user(®, argp, sizeof(reg))) | |
| return -EFAULT; | |
| parport_write_control(port, reg); | |
| return 0; | |
| case PPWDATA: | |
| if (copy_from_user(®, argp, sizeof(reg))) | |
| return -EFAULT; | |
| parport_write_data(port, reg); | |
| return 0; | |
| case PPFCONTROL: | |
| if (copy_from_user(&mask, argp, | |
| sizeof(mask))) | |
| return -EFAULT; | |
| if (copy_from_user(®, 1 + (unsigned char __user *) arg, | |
| sizeof(reg))) | |
| return -EFAULT; | |
| parport_frob_control(port, mask, reg); | |
| return 0; | |
| case PPDATADIR: | |
| if (copy_from_user(&mode, argp, sizeof(mode))) | |
| return -EFAULT; | |
| if (mode) | |
| port->ops->data_reverse(port); | |
| else | |
| port->ops->data_forward(port); | |
| return 0; | |
| case PPNEGOT: | |
| if (copy_from_user(&mode, argp, sizeof(mode))) | |
| return -EFAULT; | |
| switch ((ret = parport_negotiate(port, mode))) { | |
| case 0: break; | |
| case -1: /* handshake failed, peripheral not IEEE 1284 */ | |
| ret = -EIO; | |
| break; | |
| case 1: /* handshake succeeded, peripheral rejected mode */ | |
| ret = -ENXIO; | |
| break; | |
| } | |
| pp_enable_irq(pp); | |
| return ret; | |
| case PPWCTLONIRQ: | |
| if (copy_from_user(®, argp, sizeof(reg))) | |
| return -EFAULT; | |
| /* Remember what to set the control lines to, for next | |
| * time we get an interrupt. */ | |
| pp->irqctl = reg; | |
| pp->irqresponse = 1; | |
| return 0; | |
| case PPCLRIRQ: | |
| ret = atomic_read(&pp->irqc); | |
| if (copy_to_user(argp, &ret, sizeof(ret))) | |
| return -EFAULT; | |
| atomic_sub(ret, &pp->irqc); | |
| return 0; | |
| case PPSETTIME32: | |
| if (copy_from_user(time32, argp, sizeof(time32))) | |
| return -EFAULT; | |
| if ((time32[0] < 0) || (time32[1] < 0)) | |
| return -EINVAL; | |
| return pp_set_timeout(pp->pdev, time32[0], time32[1]); | |
| case PPSETTIME64: | |
| if (copy_from_user(time64, argp, sizeof(time64))) | |
| return -EFAULT; | |
| if ((time64[0] < 0) || (time64[1] < 0)) | |
| return -EINVAL; | |
| if (IS_ENABLED(CONFIG_SPARC64) && !in_compat_syscall()) | |
| time64[1] >>= 32; | |
| return pp_set_timeout(pp->pdev, time64[0], time64[1]); | |
| case PPGETTIME32: | |
| jiffies_to_timespec64(pp->pdev->timeout, &ts); | |
| time32[0] = ts.tv_sec; | |
| time32[1] = ts.tv_nsec / NSEC_PER_USEC; | |
| if (copy_to_user(argp, time32, sizeof(time32))) | |
| return -EFAULT; | |
| return 0; | |
| case PPGETTIME64: | |
| jiffies_to_timespec64(pp->pdev->timeout, &ts); | |
| time64[0] = ts.tv_sec; | |
| time64[1] = ts.tv_nsec / NSEC_PER_USEC; | |
| if (IS_ENABLED(CONFIG_SPARC64) && !in_compat_syscall()) | |
| time64[1] <<= 32; | |
| if (copy_to_user(argp, time64, sizeof(time64))) | |
| return -EFAULT; | |
| return 0; | |
| default: | |
| dev_dbg(&pp->pdev->dev, "What? (cmd=0x%x)\n", cmd); | |
| return -EINVAL; | |
| } | |
| /* Keep the compiler happy */ | |
| return 0; | |
| } | |
| static long pp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) | |
| { | |
| long ret; | |
| mutex_lock(&pp_do_mutex); | |
| ret = pp_do_ioctl(file, cmd, arg); | |
| mutex_unlock(&pp_do_mutex); | |
| return ret; | |
| } | |
| static int pp_open(struct inode *inode, struct file *file) | |
| { | |
| unsigned int minor = iminor(inode); | |
| struct pp_struct *pp; | |
| if (minor >= PARPORT_MAX) | |
| return -ENXIO; | |
| pp = kmalloc(sizeof(struct pp_struct), GFP_KERNEL); | |
| if (!pp) | |
| return -ENOMEM; | |
| pp->state.mode = IEEE1284_MODE_COMPAT; | |
| pp->state.phase = init_phase(pp->state.mode); | |
| pp->flags = 0; | |
| pp->irqresponse = 0; | |
| atomic_set(&pp->irqc, 0); | |
| init_waitqueue_head(&pp->irq_wait); | |
| /* Defer the actual device registration until the first claim. | |
| * That way, we know whether or not the driver wants to have | |
| * exclusive access to the port (PPEXCL). | |
| */ | |
| pp->pdev = NULL; | |
| file->private_data = pp; | |
| return 0; | |
| } | |
| static int pp_release(struct inode *inode, struct file *file) | |
| { | |
| unsigned int minor = iminor(inode); | |
| struct pp_struct *pp = file->private_data; | |
| int compat_negot; | |
| compat_negot = 0; | |
| if (!(pp->flags & PP_CLAIMED) && pp->pdev && | |
| (pp->state.mode != IEEE1284_MODE_COMPAT)) { | |
| struct ieee1284_info *info; | |
| /* parport released, but not in compatibility mode */ | |
| parport_claim_or_block(pp->pdev); | |
| pp->flags |= PP_CLAIMED; | |
| info = &pp->pdev->port->ieee1284; | |
| pp->saved_state.mode = info->mode; | |
| pp->saved_state.phase = info->phase; | |
| info->mode = pp->state.mode; | |
| info->phase = pp->state.phase; | |
| compat_negot = 1; | |
| } else if ((pp->flags & PP_CLAIMED) && pp->pdev && | |
| (pp->pdev->port->ieee1284.mode != IEEE1284_MODE_COMPAT)) { | |
| compat_negot = 2; | |
| } | |
| if (compat_negot) { | |
| parport_negotiate(pp->pdev->port, IEEE1284_MODE_COMPAT); | |
| dev_dbg(&pp->pdev->dev, | |
| "negotiated back to compatibility mode because user-space forgot\n"); | |
| } | |
| if ((pp->flags & PP_CLAIMED) && pp->pdev) { | |
| struct ieee1284_info *info; | |
| info = &pp->pdev->port->ieee1284; | |
| pp->state.mode = info->mode; | |
| pp->state.phase = info->phase; | |
| info->mode = pp->saved_state.mode; | |
| info->phase = pp->saved_state.phase; | |
| parport_release(pp->pdev); | |
| if (compat_negot != 1) { | |
| pr_debug(CHRDEV "%x: released pardevice " | |
| "because user-space forgot\n", minor); | |
| } | |
| } | |
| if (pp->pdev) { | |
| parport_unregister_device(pp->pdev); | |
| ida_free(&ida_index, pp->index); | |
| pp->pdev = NULL; | |
| pr_debug(CHRDEV "%x: unregistered pardevice\n", minor); | |
| } | |
| kfree(pp); | |
| return 0; | |
| } | |
| /* No kernel lock held - fine */ | |
| static __poll_t pp_poll(struct file *file, poll_table *wait) | |
| { | |
| struct pp_struct *pp = file->private_data; | |
| __poll_t mask = 0; | |
| poll_wait(file, &pp->irq_wait, wait); | |
| if (atomic_read(&pp->irqc)) | |
| mask |= EPOLLIN | EPOLLRDNORM; | |
| return mask; | |
| } | |
| static const struct class ppdev_class = { | |
| .name = CHRDEV, | |
| }; | |
| static const struct file_operations pp_fops = { | |
| .owner = THIS_MODULE, | |
| .read = pp_read, | |
| .write = pp_write, | |
| .poll = pp_poll, | |
| .unlocked_ioctl = pp_ioctl, | |
| .compat_ioctl = compat_ptr_ioctl, | |
| .open = pp_open, | |
| .release = pp_release, | |
| }; | |
| static void pp_attach(struct parport *port) | |
| { | |
| struct device *ret; | |
| if (devices[port->number]) | |
| return; | |
| ret = device_create(&ppdev_class, port->dev, | |
| MKDEV(PP_MAJOR, port->number), NULL, | |
| "parport%d", port->number); | |
| if (IS_ERR(ret)) { | |
| pr_err("Failed to create device parport%d\n", | |
| port->number); | |
| return; | |
| } | |
| devices[port->number] = ret; | |
| } | |
| static void pp_detach(struct parport *port) | |
| { | |
| if (!devices[port->number]) | |
| return; | |
| device_destroy(&ppdev_class, MKDEV(PP_MAJOR, port->number)); | |
| devices[port->number] = NULL; | |
| } | |
| static int pp_probe(struct pardevice *par_dev) | |
| { | |
| struct device_driver *drv = par_dev->dev.driver; | |
| int len = strlen(drv->name); | |
| if (strncmp(par_dev->name, drv->name, len)) | |
| return -ENODEV; | |
| return 0; | |
| } | |
| static struct parport_driver pp_driver = { | |
| .name = CHRDEV, | |
| .probe = pp_probe, | |
| .match_port = pp_attach, | |
| .detach = pp_detach, | |
| }; | |
| static int __init ppdev_init(void) | |
| { | |
| int err = 0; | |
| if (register_chrdev(PP_MAJOR, CHRDEV, &pp_fops)) { | |
| pr_warn(CHRDEV ": unable to get major %d\n", PP_MAJOR); | |
| return -EIO; | |
| } | |
| err = class_register(&ppdev_class); | |
| if (err) | |
| goto out_chrdev; | |
| err = parport_register_driver(&pp_driver); | |
| if (err < 0) { | |
| pr_warn(CHRDEV ": unable to register with parport\n"); | |
| goto out_class; | |
| } | |
| pr_info(PP_VERSION "\n"); | |
| goto out; | |
| out_class: | |
| class_unregister(&ppdev_class); | |
| out_chrdev: | |
| unregister_chrdev(PP_MAJOR, CHRDEV); | |
| out: | |
| return err; | |
| } | |
| static void __exit ppdev_cleanup(void) | |
| { | |
| /* Clean up all parport stuff */ | |
| parport_unregister_driver(&pp_driver); | |
| class_unregister(&ppdev_class); | |
| unregister_chrdev(PP_MAJOR, CHRDEV); | |
| } | |
| module_init(ppdev_init); | |
| module_exit(ppdev_cleanup); | |
| MODULE_DESCRIPTION("Support for user-space parallel port device drivers"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS_CHARDEV_MAJOR(PP_MAJOR); |