| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Copyright 1993 by Theodore Ts'o. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/sched.h> | |
| #include <linux/fs.h> | |
| #include <linux/pagemap.h> | |
| #include <linux/file.h> | |
| #include <linux/stat.h> | |
| #include <linux/errno.h> | |
| #include <linux/major.h> | |
| #include <linux/wait.h> | |
| #include <linux/blkpg.h> | |
| #include <linux/init.h> | |
| #include <linux/swap.h> | |
| #include <linux/slab.h> | |
| #include <linux/compat.h> | |
| #include <linux/suspend.h> | |
| #include <linux/freezer.h> | |
| #include <linux/mutex.h> | |
| #include <linux/writeback.h> | |
| #include <linux/completion.h> | |
| #include <linux/highmem.h> | |
| #include <linux/splice.h> | |
| #include <linux/sysfs.h> | |
| #include <linux/miscdevice.h> | |
| #include <linux/falloc.h> | |
| #include <linux/uio.h> | |
| #include <linux/ioprio.h> | |
| #include <linux/blk-cgroup.h> | |
| #include <linux/sched/mm.h> | |
| #include <linux/statfs.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/blk-mq.h> | |
| #include <linux/spinlock.h> | |
| #include <uapi/linux/loop.h> | |
| /* Possible states of device */ | |
| enum { | |
| Lo_unbound, | |
| Lo_bound, | |
| Lo_rundown, | |
| Lo_deleting, | |
| }; | |
| struct loop_func_table; | |
| struct loop_device { | |
| int lo_number; | |
| loff_t lo_offset; | |
| loff_t lo_sizelimit; | |
| int lo_flags; | |
| char lo_file_name[LO_NAME_SIZE]; | |
| struct file * lo_backing_file; | |
| struct block_device *lo_device; | |
| gfp_t old_gfp_mask; | |
| spinlock_t lo_lock; | |
| int lo_state; | |
| spinlock_t lo_work_lock; | |
| struct workqueue_struct *workqueue; | |
| struct work_struct rootcg_work; | |
| struct list_head rootcg_cmd_list; | |
| struct list_head idle_worker_list; | |
| struct rb_root worker_tree; | |
| struct timer_list timer; | |
| bool use_dio; | |
| bool sysfs_inited; | |
| struct request_queue *lo_queue; | |
| struct blk_mq_tag_set tag_set; | |
| struct gendisk *lo_disk; | |
| struct mutex lo_mutex; | |
| bool idr_visible; | |
| }; | |
| struct loop_cmd { | |
| struct list_head list_entry; | |
| bool use_aio; /* use AIO interface to handle I/O */ | |
| atomic_t ref; /* only for aio */ | |
| long ret; | |
| struct kiocb iocb; | |
| struct bio_vec *bvec; | |
| struct cgroup_subsys_state *blkcg_css; | |
| struct cgroup_subsys_state *memcg_css; | |
| }; | |
| #define LOOP_IDLE_WORKER_TIMEOUT (60 * HZ) | |
| #define LOOP_DEFAULT_HW_Q_DEPTH 128 | |
| static DEFINE_IDR(loop_index_idr); | |
| static DEFINE_MUTEX(loop_ctl_mutex); | |
| static DEFINE_MUTEX(loop_validate_mutex); | |
| /** | |
| * loop_global_lock_killable() - take locks for safe loop_validate_file() test | |
| * | |
| * @lo: struct loop_device | |
| * @global: true if @lo is about to bind another "struct loop_device", false otherwise | |
| * | |
| * Returns 0 on success, -EINTR otherwise. | |
| * | |
| * Since loop_validate_file() traverses on other "struct loop_device" if | |
| * is_loop_device() is true, we need a global lock for serializing concurrent | |
| * loop_configure()/loop_change_fd()/__loop_clr_fd() calls. | |
| */ | |
| static int loop_global_lock_killable(struct loop_device *lo, bool global) | |
| { | |
| int err; | |
| if (global) { | |
| err = mutex_lock_killable(&loop_validate_mutex); | |
| if (err) | |
| return err; | |
| } | |
| err = mutex_lock_killable(&lo->lo_mutex); | |
| if (err && global) | |
| mutex_unlock(&loop_validate_mutex); | |
| return err; | |
| } | |
| /** | |
| * loop_global_unlock() - release locks taken by loop_global_lock_killable() | |
| * | |
| * @lo: struct loop_device | |
| * @global: true if @lo was about to bind another "struct loop_device", false otherwise | |
| */ | |
| static void loop_global_unlock(struct loop_device *lo, bool global) | |
| { | |
| mutex_unlock(&lo->lo_mutex); | |
| if (global) | |
| mutex_unlock(&loop_validate_mutex); | |
| } | |
| static int max_part; | |
| static int part_shift; | |
| static loff_t get_size(loff_t offset, loff_t sizelimit, struct file *file) | |
| { | |
| loff_t loopsize; | |
| /* Compute loopsize in bytes */ | |
| loopsize = i_size_read(file->f_mapping->host); | |
| if (offset > 0) | |
| loopsize -= offset; | |
| /* offset is beyond i_size, weird but possible */ | |
| if (loopsize < 0) | |
| return 0; | |
| if (sizelimit > 0 && sizelimit < loopsize) | |
| loopsize = sizelimit; | |
| /* | |
| * Unfortunately, if we want to do I/O on the device, | |
| * the number of 512-byte sectors has to fit into a sector_t. | |
| */ | |
| return loopsize >> 9; | |
| } | |
| static loff_t get_loop_size(struct loop_device *lo, struct file *file) | |
| { | |
| return get_size(lo->lo_offset, lo->lo_sizelimit, file); | |
| } | |
| /* | |
| * We support direct I/O only if lo_offset is aligned with the logical I/O size | |
| * of backing device, and the logical block size of loop is bigger than that of | |
| * the backing device. | |
| */ | |
| static bool lo_bdev_can_use_dio(struct loop_device *lo, | |
| struct block_device *backing_bdev) | |
| { | |
| unsigned int sb_bsize = bdev_logical_block_size(backing_bdev); | |
| if (queue_logical_block_size(lo->lo_queue) < sb_bsize) | |
| return false; | |
| if (lo->lo_offset & (sb_bsize - 1)) | |
| return false; | |
| return true; | |
| } | |
| static void __loop_update_dio(struct loop_device *lo, bool dio) | |
| { | |
| struct file *file = lo->lo_backing_file; | |
| struct inode *inode = file->f_mapping->host; | |
| struct block_device *backing_bdev = NULL; | |
| bool use_dio; | |
| if (S_ISBLK(inode->i_mode)) | |
| backing_bdev = I_BDEV(inode); | |
| else if (inode->i_sb->s_bdev) | |
| backing_bdev = inode->i_sb->s_bdev; | |
| use_dio = dio && (file->f_mode & FMODE_CAN_ODIRECT) && | |
| (!backing_bdev || lo_bdev_can_use_dio(lo, backing_bdev)); | |
| if (lo->use_dio == use_dio) | |
| return; | |
| /* flush dirty pages before changing direct IO */ | |
| vfs_fsync(file, 0); | |
| /* | |
| * The flag of LO_FLAGS_DIRECT_IO is handled similarly with | |
| * LO_FLAGS_READ_ONLY, both are set from kernel, and losetup | |
| * will get updated by ioctl(LOOP_GET_STATUS) | |
| */ | |
| if (lo->lo_state == Lo_bound) | |
| blk_mq_freeze_queue(lo->lo_queue); | |
| lo->use_dio = use_dio; | |
| if (use_dio) | |
| lo->lo_flags |= LO_FLAGS_DIRECT_IO; | |
| else | |
| lo->lo_flags &= ~LO_FLAGS_DIRECT_IO; | |
| if (lo->lo_state == Lo_bound) | |
| blk_mq_unfreeze_queue(lo->lo_queue); | |
| } | |
| /** | |
| * loop_set_size() - sets device size and notifies userspace | |
| * @lo: struct loop_device to set the size for | |
| * @size: new size of the loop device | |
| * | |
| * Callers must validate that the size passed into this function fits into | |
| * a sector_t, eg using loop_validate_size() | |
| */ | |
| static void loop_set_size(struct loop_device *lo, loff_t size) | |
| { | |
| if (!set_capacity_and_notify(lo->lo_disk, size)) | |
| kobject_uevent(&disk_to_dev(lo->lo_disk)->kobj, KOBJ_CHANGE); | |
| } | |
| static void loop_clear_limits(struct loop_device *lo, int mode) | |
| { | |
| struct queue_limits lim = queue_limits_start_update(lo->lo_queue); | |
| if (mode & FALLOC_FL_ZERO_RANGE) | |
| lim.max_write_zeroes_sectors = 0; | |
| if (mode & FALLOC_FL_PUNCH_HOLE) { | |
| lim.max_hw_discard_sectors = 0; | |
| lim.discard_granularity = 0; | |
| } | |
| queue_limits_commit_update(lo->lo_queue, &lim); | |
| } | |
| static int lo_fallocate(struct loop_device *lo, struct request *rq, loff_t pos, | |
| int mode) | |
| { | |
| /* | |
| * We use fallocate to manipulate the space mappings used by the image | |
| * a.k.a. discard/zerorange. | |
| */ | |
| struct file *file = lo->lo_backing_file; | |
| int ret; | |
| mode |= FALLOC_FL_KEEP_SIZE; | |
| if (!bdev_max_discard_sectors(lo->lo_device)) | |
| return -EOPNOTSUPP; | |
| ret = file->f_op->fallocate(file, mode, pos, blk_rq_bytes(rq)); | |
| if (unlikely(ret && ret != -EINVAL && ret != -EOPNOTSUPP)) | |
| return -EIO; | |
| /* | |
| * We initially configure the limits in a hope that fallocate is | |
| * supported and clear them here if that turns out not to be true. | |
| */ | |
| if (unlikely(ret == -EOPNOTSUPP)) | |
| loop_clear_limits(lo, mode); | |
| return ret; | |
| } | |
| static int lo_req_flush(struct loop_device *lo, struct request *rq) | |
| { | |
| int ret = vfs_fsync(lo->lo_backing_file, 0); | |
| if (unlikely(ret && ret != -EINVAL)) | |
| ret = -EIO; | |
| return ret; | |
| } | |
| static void lo_complete_rq(struct request *rq) | |
| { | |
| struct loop_cmd *cmd = blk_mq_rq_to_pdu(rq); | |
| blk_status_t ret = BLK_STS_OK; | |
| if (cmd->ret < 0 || cmd->ret == blk_rq_bytes(rq) || | |
| req_op(rq) != REQ_OP_READ) { | |
| if (cmd->ret < 0) | |
| ret = errno_to_blk_status(cmd->ret); | |
| goto end_io; | |
| } | |
| /* | |
| * Short READ - if we got some data, advance our request and | |
| * retry it. If we got no data, end the rest with EIO. | |
| */ | |
| if (cmd->ret) { | |
| blk_update_request(rq, BLK_STS_OK, cmd->ret); | |
| cmd->ret = 0; | |
| blk_mq_requeue_request(rq, true); | |
| } else { | |
| struct bio *bio = rq->bio; | |
| while (bio) { | |
| zero_fill_bio(bio); | |
| bio = bio->bi_next; | |
| } | |
| ret = BLK_STS_IOERR; | |
| end_io: | |
| blk_mq_end_request(rq, ret); | |
| } | |
| } | |
| static void lo_rw_aio_do_completion(struct loop_cmd *cmd) | |
| { | |
| struct request *rq = blk_mq_rq_from_pdu(cmd); | |
| if (!atomic_dec_and_test(&cmd->ref)) | |
| return; | |
| kfree(cmd->bvec); | |
| cmd->bvec = NULL; | |
| if (req_op(rq) == REQ_OP_WRITE) | |
| kiocb_end_write(&cmd->iocb); | |
| if (likely(!blk_should_fake_timeout(rq->q))) | |
| blk_mq_complete_request(rq); | |
| } | |
| static void lo_rw_aio_complete(struct kiocb *iocb, long ret) | |
| { | |
| struct loop_cmd *cmd = container_of(iocb, struct loop_cmd, iocb); | |
| cmd->ret = ret; | |
| lo_rw_aio_do_completion(cmd); | |
| } | |
| static int lo_rw_aio(struct loop_device *lo, struct loop_cmd *cmd, | |
| loff_t pos, int rw) | |
| { | |
| struct iov_iter iter; | |
| struct req_iterator rq_iter; | |
| struct bio_vec *bvec; | |
| struct request *rq = blk_mq_rq_from_pdu(cmd); | |
| struct bio *bio = rq->bio; | |
| struct file *file = lo->lo_backing_file; | |
| struct bio_vec tmp; | |
| unsigned int offset; | |
| int nr_bvec = 0; | |
| int ret; | |
| rq_for_each_bvec(tmp, rq, rq_iter) | |
| nr_bvec++; | |
| if (rq->bio != rq->biotail) { | |
| bvec = kmalloc_array(nr_bvec, sizeof(struct bio_vec), | |
| GFP_NOIO); | |
| if (!bvec) | |
| return -EIO; | |
| cmd->bvec = bvec; | |
| /* | |
| * The bios of the request may be started from the middle of | |
| * the 'bvec' because of bio splitting, so we can't directly | |
| * copy bio->bi_iov_vec to new bvec. The rq_for_each_bvec | |
| * API will take care of all details for us. | |
| */ | |
| rq_for_each_bvec(tmp, rq, rq_iter) { | |
| *bvec = tmp; | |
| bvec++; | |
| } | |
| bvec = cmd->bvec; | |
| offset = 0; | |
| } else { | |
| /* | |
| * Same here, this bio may be started from the middle of the | |
| * 'bvec' because of bio splitting, so offset from the bvec | |
| * must be passed to iov iterator | |
| */ | |
| offset = bio->bi_iter.bi_bvec_done; | |
| bvec = __bvec_iter_bvec(bio->bi_io_vec, bio->bi_iter); | |
| } | |
| atomic_set(&cmd->ref, 2); | |
| iov_iter_bvec(&iter, rw, bvec, nr_bvec, blk_rq_bytes(rq)); | |
| iter.iov_offset = offset; | |
| cmd->iocb.ki_pos = pos; | |
| cmd->iocb.ki_filp = file; | |
| cmd->iocb.ki_ioprio = req_get_ioprio(rq); | |
| if (cmd->use_aio) { | |
| cmd->iocb.ki_complete = lo_rw_aio_complete; | |
| cmd->iocb.ki_flags = IOCB_DIRECT; | |
| } else { | |
| cmd->iocb.ki_complete = NULL; | |
| cmd->iocb.ki_flags = 0; | |
| } | |
| if (rw == ITER_SOURCE) { | |
| kiocb_start_write(&cmd->iocb); | |
| ret = file->f_op->write_iter(&cmd->iocb, &iter); | |
| } else | |
| ret = file->f_op->read_iter(&cmd->iocb, &iter); | |
| lo_rw_aio_do_completion(cmd); | |
| if (ret != -EIOCBQUEUED) | |
| lo_rw_aio_complete(&cmd->iocb, ret); | |
| return -EIOCBQUEUED; | |
| } | |
| static int do_req_filebacked(struct loop_device *lo, struct request *rq) | |
| { | |
| struct loop_cmd *cmd = blk_mq_rq_to_pdu(rq); | |
| loff_t pos = ((loff_t) blk_rq_pos(rq) << 9) + lo->lo_offset; | |
| switch (req_op(rq)) { | |
| case REQ_OP_FLUSH: | |
| return lo_req_flush(lo, rq); | |
| case REQ_OP_WRITE_ZEROES: | |
| /* | |
| * If the caller doesn't want deallocation, call zeroout to | |
| * write zeroes the range. Otherwise, punch them out. | |
| */ | |
| return lo_fallocate(lo, rq, pos, | |
| (rq->cmd_flags & REQ_NOUNMAP) ? | |
| FALLOC_FL_ZERO_RANGE : | |
| FALLOC_FL_PUNCH_HOLE); | |
| case REQ_OP_DISCARD: | |
| return lo_fallocate(lo, rq, pos, FALLOC_FL_PUNCH_HOLE); | |
| case REQ_OP_WRITE: | |
| return lo_rw_aio(lo, cmd, pos, ITER_SOURCE); | |
| case REQ_OP_READ: | |
| return lo_rw_aio(lo, cmd, pos, ITER_DEST); | |
| default: | |
| WARN_ON_ONCE(1); | |
| return -EIO; | |
| } | |
| } | |
| static inline void loop_update_dio(struct loop_device *lo) | |
| { | |
| __loop_update_dio(lo, (lo->lo_backing_file->f_flags & O_DIRECT) | | |
| lo->use_dio); | |
| } | |
| static void loop_reread_partitions(struct loop_device *lo) | |
| { | |
| int rc; | |
| mutex_lock(&lo->lo_disk->open_mutex); | |
| rc = bdev_disk_changed(lo->lo_disk, false); | |
| mutex_unlock(&lo->lo_disk->open_mutex); | |
| if (rc) | |
| pr_warn("%s: partition scan of loop%d (%s) failed (rc=%d)\n", | |
| __func__, lo->lo_number, lo->lo_file_name, rc); | |
| } | |
| static inline int is_loop_device(struct file *file) | |
| { | |
| struct inode *i = file->f_mapping->host; | |
| return i && S_ISBLK(i->i_mode) && imajor(i) == LOOP_MAJOR; | |
| } | |
| static int loop_validate_file(struct file *file, struct block_device *bdev) | |
| { | |
| struct inode *inode = file->f_mapping->host; | |
| struct file *f = file; | |
| /* Avoid recursion */ | |
| while (is_loop_device(f)) { | |
| struct loop_device *l; | |
| lockdep_assert_held(&loop_validate_mutex); | |
| if (f->f_mapping->host->i_rdev == bdev->bd_dev) | |
| return -EBADF; | |
| l = I_BDEV(f->f_mapping->host)->bd_disk->private_data; | |
| if (l->lo_state != Lo_bound) | |
| return -EINVAL; | |
| /* Order wrt setting lo->lo_backing_file in loop_configure(). */ | |
| rmb(); | |
| f = l->lo_backing_file; | |
| } | |
| if (!S_ISREG(inode->i_mode) && !S_ISBLK(inode->i_mode)) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| static void loop_assign_backing_file(struct loop_device *lo, struct file *file) | |
| { | |
| lo->lo_backing_file = file; | |
| lo->old_gfp_mask = mapping_gfp_mask(file->f_mapping); | |
| mapping_set_gfp_mask(file->f_mapping, | |
| lo->old_gfp_mask & ~(__GFP_IO | __GFP_FS)); | |
| } | |
| static int loop_check_backing_file(struct file *file) | |
| { | |
| if (!file->f_op->read_iter) | |
| return -EINVAL; | |
| if ((file->f_mode & FMODE_WRITE) && !file->f_op->write_iter) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| /* | |
| * loop_change_fd switched the backing store of a loopback device to | |
| * a new file. This is useful for operating system installers to free up | |
| * the original file and in High Availability environments to switch to | |
| * an alternative location for the content in case of server meltdown. | |
| * This can only work if the loop device is used read-only, and if the | |
| * new backing store is the same size and type as the old backing store. | |
| */ | |
| static int loop_change_fd(struct loop_device *lo, struct block_device *bdev, | |
| unsigned int arg) | |
| { | |
| struct file *file = fget(arg); | |
| struct file *old_file; | |
| int error; | |
| bool partscan; | |
| bool is_loop; | |
| if (!file) | |
| return -EBADF; | |
| error = loop_check_backing_file(file); | |
| if (error) { | |
| fput(file); | |
| return error; | |
| } | |
| /* suppress uevents while reconfiguring the device */ | |
| dev_set_uevent_suppress(disk_to_dev(lo->lo_disk), 1); | |
| is_loop = is_loop_device(file); | |
| error = loop_global_lock_killable(lo, is_loop); | |
| if (error) | |
| goto out_putf; | |
| error = -ENXIO; | |
| if (lo->lo_state != Lo_bound) | |
| goto out_err; | |
| /* the loop device has to be read-only */ | |
| error = -EINVAL; | |
| if (!(lo->lo_flags & LO_FLAGS_READ_ONLY)) | |
| goto out_err; | |
| error = loop_validate_file(file, bdev); | |
| if (error) | |
| goto out_err; | |
| old_file = lo->lo_backing_file; | |
| error = -EINVAL; | |
| /* size of the new backing store needs to be the same */ | |
| if (get_loop_size(lo, file) != get_loop_size(lo, old_file)) | |
| goto out_err; | |
| /* and ... switch */ | |
| disk_force_media_change(lo->lo_disk); | |
| blk_mq_freeze_queue(lo->lo_queue); | |
| mapping_set_gfp_mask(old_file->f_mapping, lo->old_gfp_mask); | |
| loop_assign_backing_file(lo, file); | |
| loop_update_dio(lo); | |
| blk_mq_unfreeze_queue(lo->lo_queue); | |
| partscan = lo->lo_flags & LO_FLAGS_PARTSCAN; | |
| loop_global_unlock(lo, is_loop); | |
| /* | |
| * Flush loop_validate_file() before fput(), for l->lo_backing_file | |
| * might be pointing at old_file which might be the last reference. | |
| */ | |
| if (!is_loop) { | |
| mutex_lock(&loop_validate_mutex); | |
| mutex_unlock(&loop_validate_mutex); | |
| } | |
| /* | |
| * We must drop file reference outside of lo_mutex as dropping | |
| * the file ref can take open_mutex which creates circular locking | |
| * dependency. | |
| */ | |
| fput(old_file); | |
| dev_set_uevent_suppress(disk_to_dev(lo->lo_disk), 0); | |
| if (partscan) | |
| loop_reread_partitions(lo); | |
| error = 0; | |
| done: | |
| kobject_uevent(&disk_to_dev(lo->lo_disk)->kobj, KOBJ_CHANGE); | |
| return error; | |
| out_err: | |
| loop_global_unlock(lo, is_loop); | |
| out_putf: | |
| fput(file); | |
| dev_set_uevent_suppress(disk_to_dev(lo->lo_disk), 0); | |
| goto done; | |
| } | |
| /* loop sysfs attributes */ | |
| static ssize_t loop_attr_show(struct device *dev, char *page, | |
| ssize_t (*callback)(struct loop_device *, char *)) | |
| { | |
| struct gendisk *disk = dev_to_disk(dev); | |
| struct loop_device *lo = disk->private_data; | |
| return callback(lo, page); | |
| } | |
| #define LOOP_ATTR_RO(_name) \ | |
| static ssize_t loop_attr_##_name##_show(struct loop_device *, char *); \ | |
| static ssize_t loop_attr_do_show_##_name(struct device *d, \ | |
| struct device_attribute *attr, char *b) \ | |
| { \ | |
| return loop_attr_show(d, b, loop_attr_##_name##_show); \ | |
| } \ | |
| static struct device_attribute loop_attr_##_name = \ | |
| __ATTR(_name, 0444, loop_attr_do_show_##_name, NULL); | |
| static ssize_t loop_attr_backing_file_show(struct loop_device *lo, char *buf) | |
| { | |
| ssize_t ret; | |
| char *p = NULL; | |
| spin_lock_irq(&lo->lo_lock); | |
| if (lo->lo_backing_file) | |
| p = file_path(lo->lo_backing_file, buf, PAGE_SIZE - 1); | |
| spin_unlock_irq(&lo->lo_lock); | |
| if (IS_ERR_OR_NULL(p)) | |
| ret = PTR_ERR(p); | |
| else { | |
| ret = strlen(p); | |
| memmove(buf, p, ret); | |
| buf[ret++] = '\n'; | |
| buf[ret] = 0; | |
| } | |
| return ret; | |
| } | |
| static ssize_t loop_attr_offset_show(struct loop_device *lo, char *buf) | |
| { | |
| return sysfs_emit(buf, "%llu\n", (unsigned long long)lo->lo_offset); | |
| } | |
| static ssize_t loop_attr_sizelimit_show(struct loop_device *lo, char *buf) | |
| { | |
| return sysfs_emit(buf, "%llu\n", (unsigned long long)lo->lo_sizelimit); | |
| } | |
| static ssize_t loop_attr_autoclear_show(struct loop_device *lo, char *buf) | |
| { | |
| int autoclear = (lo->lo_flags & LO_FLAGS_AUTOCLEAR); | |
| return sysfs_emit(buf, "%s\n", autoclear ? "1" : "0"); | |
| } | |
| static ssize_t loop_attr_partscan_show(struct loop_device *lo, char *buf) | |
| { | |
| int partscan = (lo->lo_flags & LO_FLAGS_PARTSCAN); | |
| return sysfs_emit(buf, "%s\n", partscan ? "1" : "0"); | |
| } | |
| static ssize_t loop_attr_dio_show(struct loop_device *lo, char *buf) | |
| { | |
| int dio = (lo->lo_flags & LO_FLAGS_DIRECT_IO); | |
| return sysfs_emit(buf, "%s\n", dio ? "1" : "0"); | |
| } | |
| LOOP_ATTR_RO(backing_file); | |
| LOOP_ATTR_RO(offset); | |
| LOOP_ATTR_RO(sizelimit); | |
| LOOP_ATTR_RO(autoclear); | |
| LOOP_ATTR_RO(partscan); | |
| LOOP_ATTR_RO(dio); | |
| static struct attribute *loop_attrs[] = { | |
| &loop_attr_backing_file.attr, | |
| &loop_attr_offset.attr, | |
| &loop_attr_sizelimit.attr, | |
| &loop_attr_autoclear.attr, | |
| &loop_attr_partscan.attr, | |
| &loop_attr_dio.attr, | |
| NULL, | |
| }; | |
| static struct attribute_group loop_attribute_group = { | |
| .name = "loop", | |
| .attrs= loop_attrs, | |
| }; | |
| static void loop_sysfs_init(struct loop_device *lo) | |
| { | |
| lo->sysfs_inited = !sysfs_create_group(&disk_to_dev(lo->lo_disk)->kobj, | |
| &loop_attribute_group); | |
| } | |
| static void loop_sysfs_exit(struct loop_device *lo) | |
| { | |
| if (lo->sysfs_inited) | |
| sysfs_remove_group(&disk_to_dev(lo->lo_disk)->kobj, | |
| &loop_attribute_group); | |
| } | |
| static void loop_get_discard_config(struct loop_device *lo, | |
| u32 *granularity, u32 *max_discard_sectors) | |
| { | |
| struct file *file = lo->lo_backing_file; | |
| struct inode *inode = file->f_mapping->host; | |
| struct kstatfs sbuf; | |
| /* | |
| * If the backing device is a block device, mirror its zeroing | |
| * capability. Set the discard sectors to the block device's zeroing | |
| * capabilities because loop discards result in blkdev_issue_zeroout(), | |
| * not blkdev_issue_discard(). This maintains consistent behavior with | |
| * file-backed loop devices: discarded regions read back as zero. | |
| */ | |
| if (S_ISBLK(inode->i_mode)) { | |
| struct block_device *bdev = I_BDEV(inode); | |
| *max_discard_sectors = bdev_write_zeroes_sectors(bdev); | |
| *granularity = bdev_discard_granularity(bdev); | |
| /* | |
| * We use punch hole to reclaim the free space used by the | |
| * image a.k.a. discard. | |
| */ | |
| } else if (file->f_op->fallocate && !vfs_statfs(&file->f_path, &sbuf)) { | |
| *max_discard_sectors = UINT_MAX >> 9; | |
| *granularity = sbuf.f_bsize; | |
| } | |
| } | |
| struct loop_worker { | |
| struct rb_node rb_node; | |
| struct work_struct work; | |
| struct list_head cmd_list; | |
| struct list_head idle_list; | |
| struct loop_device *lo; | |
| struct cgroup_subsys_state *blkcg_css; | |
| unsigned long last_ran_at; | |
| }; | |
| static void loop_workfn(struct work_struct *work); | |
| #ifdef CONFIG_BLK_CGROUP | |
| static inline int queue_on_root_worker(struct cgroup_subsys_state *css) | |
| { | |
| return !css || css == blkcg_root_css; | |
| } | |
| #else | |
| static inline int queue_on_root_worker(struct cgroup_subsys_state *css) | |
| { | |
| return !css; | |
| } | |
| #endif | |
| static void loop_queue_work(struct loop_device *lo, struct loop_cmd *cmd) | |
| { | |
| struct rb_node **node, *parent = NULL; | |
| struct loop_worker *cur_worker, *worker = NULL; | |
| struct work_struct *work; | |
| struct list_head *cmd_list; | |
| spin_lock_irq(&lo->lo_work_lock); | |
| if (queue_on_root_worker(cmd->blkcg_css)) | |
| goto queue_work; | |
| node = &lo->worker_tree.rb_node; | |
| while (*node) { | |
| parent = *node; | |
| cur_worker = container_of(*node, struct loop_worker, rb_node); | |
| if (cur_worker->blkcg_css == cmd->blkcg_css) { | |
| worker = cur_worker; | |
| break; | |
| } else if ((long)cur_worker->blkcg_css < (long)cmd->blkcg_css) { | |
| node = &(*node)->rb_left; | |
| } else { | |
| node = &(*node)->rb_right; | |
| } | |
| } | |
| if (worker) | |
| goto queue_work; | |
| worker = kzalloc(sizeof(struct loop_worker), GFP_NOWAIT | __GFP_NOWARN); | |
| /* | |
| * In the event we cannot allocate a worker, just queue on the | |
| * rootcg worker and issue the I/O as the rootcg | |
| */ | |
| if (!worker) { | |
| cmd->blkcg_css = NULL; | |
| if (cmd->memcg_css) | |
| css_put(cmd->memcg_css); | |
| cmd->memcg_css = NULL; | |
| goto queue_work; | |
| } | |
| worker->blkcg_css = cmd->blkcg_css; | |
| css_get(worker->blkcg_css); | |
| INIT_WORK(&worker->work, loop_workfn); | |
| INIT_LIST_HEAD(&worker->cmd_list); | |
| INIT_LIST_HEAD(&worker->idle_list); | |
| worker->lo = lo; | |
| rb_link_node(&worker->rb_node, parent, node); | |
| rb_insert_color(&worker->rb_node, &lo->worker_tree); | |
| queue_work: | |
| if (worker) { | |
| /* | |
| * We need to remove from the idle list here while | |
| * holding the lock so that the idle timer doesn't | |
| * free the worker | |
| */ | |
| if (!list_empty(&worker->idle_list)) | |
| list_del_init(&worker->idle_list); | |
| work = &worker->work; | |
| cmd_list = &worker->cmd_list; | |
| } else { | |
| work = &lo->rootcg_work; | |
| cmd_list = &lo->rootcg_cmd_list; | |
| } | |
| list_add_tail(&cmd->list_entry, cmd_list); | |
| queue_work(lo->workqueue, work); | |
| spin_unlock_irq(&lo->lo_work_lock); | |
| } | |
| static void loop_set_timer(struct loop_device *lo) | |
| { | |
| timer_reduce(&lo->timer, jiffies + LOOP_IDLE_WORKER_TIMEOUT); | |
| } | |
| static void loop_free_idle_workers(struct loop_device *lo, bool delete_all) | |
| { | |
| struct loop_worker *pos, *worker; | |
| spin_lock_irq(&lo->lo_work_lock); | |
| list_for_each_entry_safe(worker, pos, &lo->idle_worker_list, | |
| idle_list) { | |
| if (!delete_all && | |
| time_is_after_jiffies(worker->last_ran_at + | |
| LOOP_IDLE_WORKER_TIMEOUT)) | |
| break; | |
| list_del(&worker->idle_list); | |
| rb_erase(&worker->rb_node, &lo->worker_tree); | |
| css_put(worker->blkcg_css); | |
| kfree(worker); | |
| } | |
| if (!list_empty(&lo->idle_worker_list)) | |
| loop_set_timer(lo); | |
| spin_unlock_irq(&lo->lo_work_lock); | |
| } | |
| static void loop_free_idle_workers_timer(struct timer_list *timer) | |
| { | |
| struct loop_device *lo = container_of(timer, struct loop_device, timer); | |
| return loop_free_idle_workers(lo, false); | |
| } | |
| /** | |
| * loop_set_status_from_info - configure device from loop_info | |
| * @lo: struct loop_device to configure | |
| * @info: struct loop_info64 to configure the device with | |
| * | |
| * Configures the loop device parameters according to the passed | |
| * in loop_info64 configuration. | |
| */ | |
| static int | |
| loop_set_status_from_info(struct loop_device *lo, | |
| const struct loop_info64 *info) | |
| { | |
| if ((unsigned int) info->lo_encrypt_key_size > LO_KEY_SIZE) | |
| return -EINVAL; | |
| switch (info->lo_encrypt_type) { | |
| case LO_CRYPT_NONE: | |
| break; | |
| case LO_CRYPT_XOR: | |
| pr_warn("support for the xor transformation has been removed.\n"); | |
| return -EINVAL; | |
| case LO_CRYPT_CRYPTOAPI: | |
| pr_warn("support for cryptoloop has been removed. Use dm-crypt instead.\n"); | |
| return -EINVAL; | |
| default: | |
| return -EINVAL; | |
| } | |
| /* Avoid assigning overflow values */ | |
| if (info->lo_offset > LLONG_MAX || info->lo_sizelimit > LLONG_MAX) | |
| return -EOVERFLOW; | |
| lo->lo_offset = info->lo_offset; | |
| lo->lo_sizelimit = info->lo_sizelimit; | |
| memcpy(lo->lo_file_name, info->lo_file_name, LO_NAME_SIZE); | |
| lo->lo_file_name[LO_NAME_SIZE-1] = 0; | |
| lo->lo_flags = info->lo_flags; | |
| return 0; | |
| } | |
| static unsigned int loop_default_blocksize(struct loop_device *lo, | |
| struct block_device *backing_bdev) | |
| { | |
| /* In case of direct I/O, match underlying block size */ | |
| if ((lo->lo_flags & LO_FLAGS_DIRECT_IO) && backing_bdev) | |
| return bdev_logical_block_size(backing_bdev); | |
| return SECTOR_SIZE; | |
| } | |
| static void loop_update_limits(struct loop_device *lo, struct queue_limits *lim, | |
| unsigned int bsize) | |
| { | |
| struct file *file = lo->lo_backing_file; | |
| struct inode *inode = file->f_mapping->host; | |
| struct block_device *backing_bdev = NULL; | |
| u32 granularity = 0, max_discard_sectors = 0; | |
| if (S_ISBLK(inode->i_mode)) | |
| backing_bdev = I_BDEV(inode); | |
| else if (inode->i_sb->s_bdev) | |
| backing_bdev = inode->i_sb->s_bdev; | |
| if (!bsize) | |
| bsize = loop_default_blocksize(lo, backing_bdev); | |
| loop_get_discard_config(lo, &granularity, &max_discard_sectors); | |
| lim->logical_block_size = bsize; | |
| lim->physical_block_size = bsize; | |
| lim->io_min = bsize; | |
| lim->features &= ~(BLK_FEAT_WRITE_CACHE | BLK_FEAT_ROTATIONAL); | |
| if (file->f_op->fsync && !(lo->lo_flags & LO_FLAGS_READ_ONLY)) | |
| lim->features |= BLK_FEAT_WRITE_CACHE; | |
| if (backing_bdev && !bdev_nonrot(backing_bdev)) | |
| lim->features |= BLK_FEAT_ROTATIONAL; | |
| lim->max_hw_discard_sectors = max_discard_sectors; | |
| lim->max_write_zeroes_sectors = max_discard_sectors; | |
| if (max_discard_sectors) | |
| lim->discard_granularity = granularity; | |
| else | |
| lim->discard_granularity = 0; | |
| } | |
| static int loop_configure(struct loop_device *lo, blk_mode_t mode, | |
| struct block_device *bdev, | |
| const struct loop_config *config) | |
| { | |
| struct file *file = fget(config->fd); | |
| struct queue_limits lim; | |
| int error; | |
| loff_t size; | |
| bool partscan; | |
| bool is_loop; | |
| if (!file) | |
| return -EBADF; | |
| error = loop_check_backing_file(file); | |
| if (error) { | |
| fput(file); | |
| return error; | |
| } | |
| is_loop = is_loop_device(file); | |
| /* This is safe, since we have a reference from open(). */ | |
| __module_get(THIS_MODULE); | |
| /* | |
| * If we don't hold exclusive handle for the device, upgrade to it | |
| * here to avoid changing device under exclusive owner. | |
| */ | |
| if (!(mode & BLK_OPEN_EXCL)) { | |
| error = bd_prepare_to_claim(bdev, loop_configure, NULL); | |
| if (error) | |
| goto out_putf; | |
| } | |
| error = loop_global_lock_killable(lo, is_loop); | |
| if (error) | |
| goto out_bdev; | |
| error = -EBUSY; | |
| if (lo->lo_state != Lo_unbound) | |
| goto out_unlock; | |
| error = loop_validate_file(file, bdev); | |
| if (error) | |
| goto out_unlock; | |
| if ((config->info.lo_flags & ~LOOP_CONFIGURE_SETTABLE_FLAGS) != 0) { | |
| error = -EINVAL; | |
| goto out_unlock; | |
| } | |
| error = loop_set_status_from_info(lo, &config->info); | |
| if (error) | |
| goto out_unlock; | |
| if (!(file->f_mode & FMODE_WRITE) || !(mode & BLK_OPEN_WRITE) || | |
| !file->f_op->write_iter) | |
| lo->lo_flags |= LO_FLAGS_READ_ONLY; | |
| if (!lo->workqueue) { | |
| lo->workqueue = alloc_workqueue("loop%d", | |
| WQ_UNBOUND | WQ_FREEZABLE, | |
| 0, lo->lo_number); | |
| if (!lo->workqueue) { | |
| error = -ENOMEM; | |
| goto out_unlock; | |
| } | |
| } | |
| /* suppress uevents while reconfiguring the device */ | |
| dev_set_uevent_suppress(disk_to_dev(lo->lo_disk), 1); | |
| disk_force_media_change(lo->lo_disk); | |
| set_disk_ro(lo->lo_disk, (lo->lo_flags & LO_FLAGS_READ_ONLY) != 0); | |
| lo->use_dio = lo->lo_flags & LO_FLAGS_DIRECT_IO; | |
| lo->lo_device = bdev; | |
| loop_assign_backing_file(lo, file); | |
| lim = queue_limits_start_update(lo->lo_queue); | |
| loop_update_limits(lo, &lim, config->block_size); | |
| error = queue_limits_commit_update(lo->lo_queue, &lim); | |
| if (error) | |
| goto out_unlock; | |
| loop_update_dio(lo); | |
| loop_sysfs_init(lo); | |
| size = get_loop_size(lo, file); | |
| loop_set_size(lo, size); | |
| /* Order wrt reading lo_state in loop_validate_file(). */ | |
| wmb(); | |
| lo->lo_state = Lo_bound; | |
| if (part_shift) | |
| lo->lo_flags |= LO_FLAGS_PARTSCAN; | |
| partscan = lo->lo_flags & LO_FLAGS_PARTSCAN; | |
| if (partscan) | |
| clear_bit(GD_SUPPRESS_PART_SCAN, &lo->lo_disk->state); | |
| dev_set_uevent_suppress(disk_to_dev(lo->lo_disk), 0); | |
| kobject_uevent(&disk_to_dev(lo->lo_disk)->kobj, KOBJ_CHANGE); | |
| loop_global_unlock(lo, is_loop); | |
| if (partscan) | |
| loop_reread_partitions(lo); | |
| if (!(mode & BLK_OPEN_EXCL)) | |
| bd_abort_claiming(bdev, loop_configure); | |
| return 0; | |
| out_unlock: | |
| loop_global_unlock(lo, is_loop); | |
| out_bdev: | |
| if (!(mode & BLK_OPEN_EXCL)) | |
| bd_abort_claiming(bdev, loop_configure); | |
| out_putf: | |
| fput(file); | |
| /* This is safe: open() is still holding a reference. */ | |
| module_put(THIS_MODULE); | |
| return error; | |
| } | |
| static void __loop_clr_fd(struct loop_device *lo) | |
| { | |
| struct queue_limits lim; | |
| struct file *filp; | |
| gfp_t gfp = lo->old_gfp_mask; | |
| spin_lock_irq(&lo->lo_lock); | |
| filp = lo->lo_backing_file; | |
| lo->lo_backing_file = NULL; | |
| spin_unlock_irq(&lo->lo_lock); | |
| lo->lo_device = NULL; | |
| lo->lo_offset = 0; | |
| lo->lo_sizelimit = 0; | |
| memset(lo->lo_file_name, 0, LO_NAME_SIZE); | |
| /* reset the block size to the default */ | |
| lim = queue_limits_start_update(lo->lo_queue); | |
| lim.logical_block_size = SECTOR_SIZE; | |
| lim.physical_block_size = SECTOR_SIZE; | |
| lim.io_min = SECTOR_SIZE; | |
| queue_limits_commit_update(lo->lo_queue, &lim); | |
| invalidate_disk(lo->lo_disk); | |
| loop_sysfs_exit(lo); | |
| /* let user-space know about this change */ | |
| kobject_uevent(&disk_to_dev(lo->lo_disk)->kobj, KOBJ_CHANGE); | |
| mapping_set_gfp_mask(filp->f_mapping, gfp); | |
| /* This is safe: open() is still holding a reference. */ | |
| module_put(THIS_MODULE); | |
| disk_force_media_change(lo->lo_disk); | |
| if (lo->lo_flags & LO_FLAGS_PARTSCAN) { | |
| int err; | |
| /* | |
| * open_mutex has been held already in release path, so don't | |
| * acquire it if this function is called in such case. | |
| * | |
| * If the reread partition isn't from release path, lo_refcnt | |
| * must be at least one and it can only become zero when the | |
| * current holder is released. | |
| */ | |
| err = bdev_disk_changed(lo->lo_disk, false); | |
| if (err) | |
| pr_warn("%s: partition scan of loop%d failed (rc=%d)\n", | |
| __func__, lo->lo_number, err); | |
| /* Device is gone, no point in returning error */ | |
| } | |
| /* | |
| * lo->lo_state is set to Lo_unbound here after above partscan has | |
| * finished. There cannot be anybody else entering __loop_clr_fd() as | |
| * Lo_rundown state protects us from all the other places trying to | |
| * change the 'lo' device. | |
| */ | |
| lo->lo_flags = 0; | |
| if (!part_shift) | |
| set_bit(GD_SUPPRESS_PART_SCAN, &lo->lo_disk->state); | |
| mutex_lock(&lo->lo_mutex); | |
| lo->lo_state = Lo_unbound; | |
| mutex_unlock(&lo->lo_mutex); | |
| /* | |
| * Need not hold lo_mutex to fput backing file. Calling fput holding | |
| * lo_mutex triggers a circular lock dependency possibility warning as | |
| * fput can take open_mutex which is usually taken before lo_mutex. | |
| */ | |
| fput(filp); | |
| } | |
| static int loop_clr_fd(struct loop_device *lo) | |
| { | |
| int err; | |
| /* | |
| * Since lo_ioctl() is called without locks held, it is possible that | |
| * loop_configure()/loop_change_fd() and loop_clr_fd() run in parallel. | |
| * | |
| * Therefore, use global lock when setting Lo_rundown state in order to | |
| * make sure that loop_validate_file() will fail if the "struct file" | |
| * which loop_configure()/loop_change_fd() found via fget() was this | |
| * loop device. | |
| */ | |
| err = loop_global_lock_killable(lo, true); | |
| if (err) | |
| return err; | |
| if (lo->lo_state != Lo_bound) { | |
| loop_global_unlock(lo, true); | |
| return -ENXIO; | |
| } | |
| /* | |
| * Mark the device for removing the backing device on last close. | |
| * If we are the only opener, also switch the state to roundown here to | |
| * prevent new openers from coming in. | |
| */ | |
| lo->lo_flags |= LO_FLAGS_AUTOCLEAR; | |
| if (disk_openers(lo->lo_disk) == 1) | |
| lo->lo_state = Lo_rundown; | |
| loop_global_unlock(lo, true); | |
| return 0; | |
| } | |
| static int | |
| loop_set_status(struct loop_device *lo, const struct loop_info64 *info) | |
| { | |
| int err; | |
| int prev_lo_flags; | |
| bool partscan = false; | |
| bool size_changed = false; | |
| err = mutex_lock_killable(&lo->lo_mutex); | |
| if (err) | |
| return err; | |
| if (lo->lo_state != Lo_bound) { | |
| err = -ENXIO; | |
| goto out_unlock; | |
| } | |
| if (lo->lo_offset != info->lo_offset || | |
| lo->lo_sizelimit != info->lo_sizelimit) { | |
| size_changed = true; | |
| sync_blockdev(lo->lo_device); | |
| invalidate_bdev(lo->lo_device); | |
| } | |
| /* I/O need to be drained during transfer transition */ | |
| blk_mq_freeze_queue(lo->lo_queue); | |
| prev_lo_flags = lo->lo_flags; | |
| err = loop_set_status_from_info(lo, info); | |
| if (err) | |
| goto out_unfreeze; | |
| /* Mask out flags that can't be set using LOOP_SET_STATUS. */ | |
| lo->lo_flags &= LOOP_SET_STATUS_SETTABLE_FLAGS; | |
| /* For those flags, use the previous values instead */ | |
| lo->lo_flags |= prev_lo_flags & ~LOOP_SET_STATUS_SETTABLE_FLAGS; | |
| /* For flags that can't be cleared, use previous values too */ | |
| lo->lo_flags |= prev_lo_flags & ~LOOP_SET_STATUS_CLEARABLE_FLAGS; | |
| if (size_changed) { | |
| loff_t new_size = get_size(lo->lo_offset, lo->lo_sizelimit, | |
| lo->lo_backing_file); | |
| loop_set_size(lo, new_size); | |
| } | |
| /* update dio if lo_offset or transfer is changed */ | |
| __loop_update_dio(lo, lo->use_dio); | |
| out_unfreeze: | |
| blk_mq_unfreeze_queue(lo->lo_queue); | |
| if (!err && (lo->lo_flags & LO_FLAGS_PARTSCAN) && | |
| !(prev_lo_flags & LO_FLAGS_PARTSCAN)) { | |
| clear_bit(GD_SUPPRESS_PART_SCAN, &lo->lo_disk->state); | |
| partscan = true; | |
| } | |
| out_unlock: | |
| mutex_unlock(&lo->lo_mutex); | |
| if (partscan) | |
| loop_reread_partitions(lo); | |
| return err; | |
| } | |
| static int | |
| loop_get_status(struct loop_device *lo, struct loop_info64 *info) | |
| { | |
| struct path path; | |
| struct kstat stat; | |
| int ret; | |
| ret = mutex_lock_killable(&lo->lo_mutex); | |
| if (ret) | |
| return ret; | |
| if (lo->lo_state != Lo_bound) { | |
| mutex_unlock(&lo->lo_mutex); | |
| return -ENXIO; | |
| } | |
| memset(info, 0, sizeof(*info)); | |
| info->lo_number = lo->lo_number; | |
| info->lo_offset = lo->lo_offset; | |
| info->lo_sizelimit = lo->lo_sizelimit; | |
| info->lo_flags = lo->lo_flags; | |
| memcpy(info->lo_file_name, lo->lo_file_name, LO_NAME_SIZE); | |
| /* Drop lo_mutex while we call into the filesystem. */ | |
| path = lo->lo_backing_file->f_path; | |
| path_get(&path); | |
| mutex_unlock(&lo->lo_mutex); | |
| ret = vfs_getattr(&path, &stat, STATX_INO, AT_STATX_SYNC_AS_STAT); | |
| if (!ret) { | |
| info->lo_device = huge_encode_dev(stat.dev); | |
| info->lo_inode = stat.ino; | |
| info->lo_rdevice = huge_encode_dev(stat.rdev); | |
| } | |
| path_put(&path); | |
| return ret; | |
| } | |
| static void | |
| loop_info64_from_old(const struct loop_info *info, struct loop_info64 *info64) | |
| { | |
| memset(info64, 0, sizeof(*info64)); | |
| info64->lo_number = info->lo_number; | |
| info64->lo_device = info->lo_device; | |
| info64->lo_inode = info->lo_inode; | |
| info64->lo_rdevice = info->lo_rdevice; | |
| info64->lo_offset = info->lo_offset; | |
| info64->lo_sizelimit = 0; | |
| info64->lo_flags = info->lo_flags; | |
| memcpy(info64->lo_file_name, info->lo_name, LO_NAME_SIZE); | |
| } | |
| static int | |
| loop_info64_to_old(const struct loop_info64 *info64, struct loop_info *info) | |
| { | |
| memset(info, 0, sizeof(*info)); | |
| info->lo_number = info64->lo_number; | |
| info->lo_device = info64->lo_device; | |
| info->lo_inode = info64->lo_inode; | |
| info->lo_rdevice = info64->lo_rdevice; | |
| info->lo_offset = info64->lo_offset; | |
| info->lo_flags = info64->lo_flags; | |
| memcpy(info->lo_name, info64->lo_file_name, LO_NAME_SIZE); | |
| /* error in case values were truncated */ | |
| if (info->lo_device != info64->lo_device || | |
| info->lo_rdevice != info64->lo_rdevice || | |
| info->lo_inode != info64->lo_inode || | |
| info->lo_offset != info64->lo_offset) | |
| return -EOVERFLOW; | |
| return 0; | |
| } | |
| static int | |
| loop_set_status_old(struct loop_device *lo, const struct loop_info __user *arg) | |
| { | |
| struct loop_info info; | |
| struct loop_info64 info64; | |
| if (copy_from_user(&info, arg, sizeof (struct loop_info))) | |
| return -EFAULT; | |
| loop_info64_from_old(&info, &info64); | |
| return loop_set_status(lo, &info64); | |
| } | |
| static int | |
| loop_set_status64(struct loop_device *lo, const struct loop_info64 __user *arg) | |
| { | |
| struct loop_info64 info64; | |
| if (copy_from_user(&info64, arg, sizeof (struct loop_info64))) | |
| return -EFAULT; | |
| return loop_set_status(lo, &info64); | |
| } | |
| static int | |
| loop_get_status_old(struct loop_device *lo, struct loop_info __user *arg) { | |
| struct loop_info info; | |
| struct loop_info64 info64; | |
| int err; | |
| if (!arg) | |
| return -EINVAL; | |
| err = loop_get_status(lo, &info64); | |
| if (!err) | |
| err = loop_info64_to_old(&info64, &info); | |
| if (!err && copy_to_user(arg, &info, sizeof(info))) | |
| err = -EFAULT; | |
| return err; | |
| } | |
| static int | |
| loop_get_status64(struct loop_device *lo, struct loop_info64 __user *arg) { | |
| struct loop_info64 info64; | |
| int err; | |
| if (!arg) | |
| return -EINVAL; | |
| err = loop_get_status(lo, &info64); | |
| if (!err && copy_to_user(arg, &info64, sizeof(info64))) | |
| err = -EFAULT; | |
| return err; | |
| } | |
| static int loop_set_capacity(struct loop_device *lo) | |
| { | |
| loff_t size; | |
| if (unlikely(lo->lo_state != Lo_bound)) | |
| return -ENXIO; | |
| size = get_loop_size(lo, lo->lo_backing_file); | |
| loop_set_size(lo, size); | |
| return 0; | |
| } | |
| static int loop_set_dio(struct loop_device *lo, unsigned long arg) | |
| { | |
| int error = -ENXIO; | |
| if (lo->lo_state != Lo_bound) | |
| goto out; | |
| __loop_update_dio(lo, !!arg); | |
| if (lo->use_dio == !!arg) | |
| return 0; | |
| error = -EINVAL; | |
| out: | |
| return error; | |
| } | |
| static int loop_set_block_size(struct loop_device *lo, blk_mode_t mode, | |
| struct block_device *bdev, unsigned long arg) | |
| { | |
| struct queue_limits lim; | |
| int err = 0; | |
| /* | |
| * If we don't hold exclusive handle for the device, upgrade to it | |
| * here to avoid changing device under exclusive owner. | |
| */ | |
| if (!(mode & BLK_OPEN_EXCL)) { | |
| err = bd_prepare_to_claim(bdev, loop_set_block_size, NULL); | |
| if (err) | |
| return err; | |
| } | |
| err = mutex_lock_killable(&lo->lo_mutex); | |
| if (err) | |
| goto abort_claim; | |
| if (lo->lo_state != Lo_bound) { | |
| err = -ENXIO; | |
| goto unlock; | |
| } | |
| if (lo->lo_queue->limits.logical_block_size == arg) | |
| goto unlock; | |
| sync_blockdev(lo->lo_device); | |
| invalidate_bdev(lo->lo_device); | |
| blk_mq_freeze_queue(lo->lo_queue); | |
| lim = queue_limits_start_update(lo->lo_queue); | |
| loop_update_limits(lo, &lim, arg); | |
| err = queue_limits_commit_update(lo->lo_queue, &lim); | |
| loop_update_dio(lo); | |
| blk_mq_unfreeze_queue(lo->lo_queue); | |
| unlock: | |
| mutex_unlock(&lo->lo_mutex); | |
| abort_claim: | |
| if (!(mode & BLK_OPEN_EXCL)) | |
| bd_abort_claiming(bdev, loop_set_block_size); | |
| return err; | |
| } | |
| static int lo_simple_ioctl(struct loop_device *lo, unsigned int cmd, | |
| unsigned long arg) | |
| { | |
| int err; | |
| err = mutex_lock_killable(&lo->lo_mutex); | |
| if (err) | |
| return err; | |
| switch (cmd) { | |
| case LOOP_SET_CAPACITY: | |
| err = loop_set_capacity(lo); | |
| break; | |
| case LOOP_SET_DIRECT_IO: | |
| err = loop_set_dio(lo, arg); | |
| break; | |
| default: | |
| err = -EINVAL; | |
| } | |
| mutex_unlock(&lo->lo_mutex); | |
| return err; | |
| } | |
| static int lo_ioctl(struct block_device *bdev, blk_mode_t mode, | |
| unsigned int cmd, unsigned long arg) | |
| { | |
| struct loop_device *lo = bdev->bd_disk->private_data; | |
| void __user *argp = (void __user *) arg; | |
| int err; | |
| switch (cmd) { | |
| case LOOP_SET_FD: { | |
| /* | |
| * Legacy case - pass in a zeroed out struct loop_config with | |
| * only the file descriptor set , which corresponds with the | |
| * default parameters we'd have used otherwise. | |
| */ | |
| struct loop_config config; | |
| memset(&config, 0, sizeof(config)); | |
| config.fd = arg; | |
| return loop_configure(lo, mode, bdev, &config); | |
| } | |
| case LOOP_CONFIGURE: { | |
| struct loop_config config; | |
| if (copy_from_user(&config, argp, sizeof(config))) | |
| return -EFAULT; | |
| return loop_configure(lo, mode, bdev, &config); | |
| } | |
| case LOOP_CHANGE_FD: | |
| return loop_change_fd(lo, bdev, arg); | |
| case LOOP_CLR_FD: | |
| return loop_clr_fd(lo); | |
| case LOOP_SET_STATUS: | |
| err = -EPERM; | |
| if ((mode & BLK_OPEN_WRITE) || capable(CAP_SYS_ADMIN)) | |
| err = loop_set_status_old(lo, argp); | |
| break; | |
| case LOOP_GET_STATUS: | |
| return loop_get_status_old(lo, argp); | |
| case LOOP_SET_STATUS64: | |
| err = -EPERM; | |
| if ((mode & BLK_OPEN_WRITE) || capable(CAP_SYS_ADMIN)) | |
| err = loop_set_status64(lo, argp); | |
| break; | |
| case LOOP_GET_STATUS64: | |
| return loop_get_status64(lo, argp); | |
| case LOOP_SET_BLOCK_SIZE: | |
| if (!(mode & BLK_OPEN_WRITE) && !capable(CAP_SYS_ADMIN)) | |
| return -EPERM; | |
| return loop_set_block_size(lo, mode, bdev, arg); | |
| case LOOP_SET_CAPACITY: | |
| case LOOP_SET_DIRECT_IO: | |
| if (!(mode & BLK_OPEN_WRITE) && !capable(CAP_SYS_ADMIN)) | |
| return -EPERM; | |
| fallthrough; | |
| default: | |
| err = lo_simple_ioctl(lo, cmd, arg); | |
| break; | |
| } | |
| return err; | |
| } | |
| #ifdef CONFIG_COMPAT | |
| struct compat_loop_info { | |
| compat_int_t lo_number; /* ioctl r/o */ | |
| compat_dev_t lo_device; /* ioctl r/o */ | |
| compat_ulong_t lo_inode; /* ioctl r/o */ | |
| compat_dev_t lo_rdevice; /* ioctl r/o */ | |
| compat_int_t lo_offset; | |
| compat_int_t lo_encrypt_type; /* obsolete, ignored */ | |
| compat_int_t lo_encrypt_key_size; /* ioctl w/o */ | |
| compat_int_t lo_flags; /* ioctl r/o */ | |
| char lo_name[LO_NAME_SIZE]; | |
| unsigned char lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */ | |
| compat_ulong_t lo_init[2]; | |
| char reserved[4]; | |
| }; | |
| /* | |
| * Transfer 32-bit compatibility structure in userspace to 64-bit loop info | |
| * - noinlined to reduce stack space usage in main part of driver | |
| */ | |
| static noinline int | |
| loop_info64_from_compat(const struct compat_loop_info __user *arg, | |
| struct loop_info64 *info64) | |
| { | |
| struct compat_loop_info info; | |
| if (copy_from_user(&info, arg, sizeof(info))) | |
| return -EFAULT; | |
| memset(info64, 0, sizeof(*info64)); | |
| info64->lo_number = info.lo_number; | |
| info64->lo_device = info.lo_device; | |
| info64->lo_inode = info.lo_inode; | |
| info64->lo_rdevice = info.lo_rdevice; | |
| info64->lo_offset = info.lo_offset; | |
| info64->lo_sizelimit = 0; | |
| info64->lo_flags = info.lo_flags; | |
| memcpy(info64->lo_file_name, info.lo_name, LO_NAME_SIZE); | |
| return 0; | |
| } | |
| /* | |
| * Transfer 64-bit loop info to 32-bit compatibility structure in userspace | |
| * - noinlined to reduce stack space usage in main part of driver | |
| */ | |
| static noinline int | |
| loop_info64_to_compat(const struct loop_info64 *info64, | |
| struct compat_loop_info __user *arg) | |
| { | |
| struct compat_loop_info info; | |
| memset(&info, 0, sizeof(info)); | |
| info.lo_number = info64->lo_number; | |
| info.lo_device = info64->lo_device; | |
| info.lo_inode = info64->lo_inode; | |
| info.lo_rdevice = info64->lo_rdevice; | |
| info.lo_offset = info64->lo_offset; | |
| info.lo_flags = info64->lo_flags; | |
| memcpy(info.lo_name, info64->lo_file_name, LO_NAME_SIZE); | |
| /* error in case values were truncated */ | |
| if (info.lo_device != info64->lo_device || | |
| info.lo_rdevice != info64->lo_rdevice || | |
| info.lo_inode != info64->lo_inode || | |
| info.lo_offset != info64->lo_offset) | |
| return -EOVERFLOW; | |
| if (copy_to_user(arg, &info, sizeof(info))) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| static int | |
| loop_set_status_compat(struct loop_device *lo, | |
| const struct compat_loop_info __user *arg) | |
| { | |
| struct loop_info64 info64; | |
| int ret; | |
| ret = loop_info64_from_compat(arg, &info64); | |
| if (ret < 0) | |
| return ret; | |
| return loop_set_status(lo, &info64); | |
| } | |
| static int | |
| loop_get_status_compat(struct loop_device *lo, | |
| struct compat_loop_info __user *arg) | |
| { | |
| struct loop_info64 info64; | |
| int err; | |
| if (!arg) | |
| return -EINVAL; | |
| err = loop_get_status(lo, &info64); | |
| if (!err) | |
| err = loop_info64_to_compat(&info64, arg); | |
| return err; | |
| } | |
| static int lo_compat_ioctl(struct block_device *bdev, blk_mode_t mode, | |
| unsigned int cmd, unsigned long arg) | |
| { | |
| struct loop_device *lo = bdev->bd_disk->private_data; | |
| int err; | |
| switch(cmd) { | |
| case LOOP_SET_STATUS: | |
| err = loop_set_status_compat(lo, | |
| (const struct compat_loop_info __user *)arg); | |
| break; | |
| case LOOP_GET_STATUS: | |
| err = loop_get_status_compat(lo, | |
| (struct compat_loop_info __user *)arg); | |
| break; | |
| case LOOP_SET_CAPACITY: | |
| case LOOP_CLR_FD: | |
| case LOOP_GET_STATUS64: | |
| case LOOP_SET_STATUS64: | |
| case LOOP_CONFIGURE: | |
| arg = (unsigned long) compat_ptr(arg); | |
| fallthrough; | |
| case LOOP_SET_FD: | |
| case LOOP_CHANGE_FD: | |
| case LOOP_SET_BLOCK_SIZE: | |
| case LOOP_SET_DIRECT_IO: | |
| err = lo_ioctl(bdev, mode, cmd, arg); | |
| break; | |
| default: | |
| err = -ENOIOCTLCMD; | |
| break; | |
| } | |
| return err; | |
| } | |
| #endif | |
| static int lo_open(struct gendisk *disk, blk_mode_t mode) | |
| { | |
| struct loop_device *lo = disk->private_data; | |
| int err; | |
| err = mutex_lock_killable(&lo->lo_mutex); | |
| if (err) | |
| return err; | |
| if (lo->lo_state == Lo_deleting || lo->lo_state == Lo_rundown) | |
| err = -ENXIO; | |
| mutex_unlock(&lo->lo_mutex); | |
| return err; | |
| } | |
| static void lo_release(struct gendisk *disk) | |
| { | |
| struct loop_device *lo = disk->private_data; | |
| bool need_clear = false; | |
| if (disk_openers(disk) > 0) | |
| return; | |
| /* | |
| * Clear the backing device information if this is the last close of | |
| * a device that's been marked for auto clear, or on which LOOP_CLR_FD | |
| * has been called. | |
| */ | |
| mutex_lock(&lo->lo_mutex); | |
| if (lo->lo_state == Lo_bound && (lo->lo_flags & LO_FLAGS_AUTOCLEAR)) | |
| lo->lo_state = Lo_rundown; | |
| need_clear = (lo->lo_state == Lo_rundown); | |
| mutex_unlock(&lo->lo_mutex); | |
| if (need_clear) | |
| __loop_clr_fd(lo); | |
| } | |
| static void lo_free_disk(struct gendisk *disk) | |
| { | |
| struct loop_device *lo = disk->private_data; | |
| if (lo->workqueue) | |
| destroy_workqueue(lo->workqueue); | |
| loop_free_idle_workers(lo, true); | |
| timer_shutdown_sync(&lo->timer); | |
| mutex_destroy(&lo->lo_mutex); | |
| kfree(lo); | |
| } | |
| static const struct block_device_operations lo_fops = { | |
| .owner = THIS_MODULE, | |
| .open = lo_open, | |
| .release = lo_release, | |
| .ioctl = lo_ioctl, | |
| #ifdef CONFIG_COMPAT | |
| .compat_ioctl = lo_compat_ioctl, | |
| #endif | |
| .free_disk = lo_free_disk, | |
| }; | |
| /* | |
| * And now the modules code and kernel interface. | |
| */ | |
| /* | |
| * If max_loop is specified, create that many devices upfront. | |
| * This also becomes a hard limit. If max_loop is not specified, | |
| * the default isn't a hard limit (as before commit 85c50197716c | |
| * changed the default value from 0 for max_loop=0 reasons), just | |
| * create CONFIG_BLK_DEV_LOOP_MIN_COUNT loop devices at module | |
| * init time. Loop devices can be requested on-demand with the | |
| * /dev/loop-control interface, or be instantiated by accessing | |
| * a 'dead' device node. | |
| */ | |
| static int max_loop = CONFIG_BLK_DEV_LOOP_MIN_COUNT; | |
| #ifdef CONFIG_BLOCK_LEGACY_AUTOLOAD | |
| static bool max_loop_specified; | |
| static int max_loop_param_set_int(const char *val, | |
| const struct kernel_param *kp) | |
| { | |
| int ret; | |
| ret = param_set_int(val, kp); | |
| if (ret < 0) | |
| return ret; | |
| max_loop_specified = true; | |
| return 0; | |
| } | |
| static const struct kernel_param_ops max_loop_param_ops = { | |
| .set = max_loop_param_set_int, | |
| .get = param_get_int, | |
| }; | |
| module_param_cb(max_loop, &max_loop_param_ops, &max_loop, 0444); | |
| MODULE_PARM_DESC(max_loop, "Maximum number of loop devices"); | |
| #else | |
| module_param(max_loop, int, 0444); | |
| MODULE_PARM_DESC(max_loop, "Initial number of loop devices"); | |
| #endif | |
| module_param(max_part, int, 0444); | |
| MODULE_PARM_DESC(max_part, "Maximum number of partitions per loop device"); | |
| static int hw_queue_depth = LOOP_DEFAULT_HW_Q_DEPTH; | |
| static int loop_set_hw_queue_depth(const char *s, const struct kernel_param *p) | |
| { | |
| int qd, ret; | |
| ret = kstrtoint(s, 0, &qd); | |
| if (ret < 0) | |
| return ret; | |
| if (qd < 1) | |
| return -EINVAL; | |
| hw_queue_depth = qd; | |
| return 0; | |
| } | |
| static const struct kernel_param_ops loop_hw_qdepth_param_ops = { | |
| .set = loop_set_hw_queue_depth, | |
| .get = param_get_int, | |
| }; | |
| device_param_cb(hw_queue_depth, &loop_hw_qdepth_param_ops, &hw_queue_depth, 0444); | |
| MODULE_PARM_DESC(hw_queue_depth, "Queue depth for each hardware queue. Default: " __stringify(LOOP_DEFAULT_HW_Q_DEPTH)); | |
| MODULE_DESCRIPTION("Loopback device support"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS_BLOCKDEV_MAJOR(LOOP_MAJOR); | |
| static blk_status_t loop_queue_rq(struct blk_mq_hw_ctx *hctx, | |
| const struct blk_mq_queue_data *bd) | |
| { | |
| struct request *rq = bd->rq; | |
| struct loop_cmd *cmd = blk_mq_rq_to_pdu(rq); | |
| struct loop_device *lo = rq->q->queuedata; | |
| blk_mq_start_request(rq); | |
| if (lo->lo_state != Lo_bound) | |
| return BLK_STS_IOERR; | |
| switch (req_op(rq)) { | |
| case REQ_OP_FLUSH: | |
| case REQ_OP_DISCARD: | |
| case REQ_OP_WRITE_ZEROES: | |
| cmd->use_aio = false; | |
| break; | |
| default: | |
| cmd->use_aio = lo->use_dio; | |
| break; | |
| } | |
| /* always use the first bio's css */ | |
| cmd->blkcg_css = NULL; | |
| cmd->memcg_css = NULL; | |
| #ifdef CONFIG_BLK_CGROUP | |
| if (rq->bio) { | |
| cmd->blkcg_css = bio_blkcg_css(rq->bio); | |
| #ifdef CONFIG_MEMCG | |
| if (cmd->blkcg_css) { | |
| cmd->memcg_css = | |
| cgroup_get_e_css(cmd->blkcg_css->cgroup, | |
| &memory_cgrp_subsys); | |
| } | |
| #endif | |
| } | |
| #endif | |
| loop_queue_work(lo, cmd); | |
| return BLK_STS_OK; | |
| } | |
| static void loop_handle_cmd(struct loop_cmd *cmd) | |
| { | |
| struct cgroup_subsys_state *cmd_blkcg_css = cmd->blkcg_css; | |
| struct cgroup_subsys_state *cmd_memcg_css = cmd->memcg_css; | |
| struct request *rq = blk_mq_rq_from_pdu(cmd); | |
| const bool write = op_is_write(req_op(rq)); | |
| struct loop_device *lo = rq->q->queuedata; | |
| int ret = 0; | |
| struct mem_cgroup *old_memcg = NULL; | |
| if (write && (lo->lo_flags & LO_FLAGS_READ_ONLY)) { | |
| ret = -EIO; | |
| goto failed; | |
| } | |
| if (cmd_blkcg_css) | |
| kthread_associate_blkcg(cmd_blkcg_css); | |
| if (cmd_memcg_css) | |
| old_memcg = set_active_memcg( | |
| mem_cgroup_from_css(cmd_memcg_css)); | |
| /* | |
| * do_req_filebacked() may call blk_mq_complete_request() synchronously | |
| * or asynchronously if using aio. Hence, do not touch 'cmd' after | |
| * do_req_filebacked() has returned unless we are sure that 'cmd' has | |
| * not yet been completed. | |
| */ | |
| ret = do_req_filebacked(lo, rq); | |
| if (cmd_blkcg_css) | |
| kthread_associate_blkcg(NULL); | |
| if (cmd_memcg_css) { | |
| set_active_memcg(old_memcg); | |
| css_put(cmd_memcg_css); | |
| } | |
| failed: | |
| /* complete non-aio request */ | |
| if (ret != -EIOCBQUEUED) { | |
| if (ret == -EOPNOTSUPP) | |
| cmd->ret = ret; | |
| else | |
| cmd->ret = ret ? -EIO : 0; | |
| if (likely(!blk_should_fake_timeout(rq->q))) | |
| blk_mq_complete_request(rq); | |
| } | |
| } | |
| static void loop_process_work(struct loop_worker *worker, | |
| struct list_head *cmd_list, struct loop_device *lo) | |
| { | |
| int orig_flags = current->flags; | |
| struct loop_cmd *cmd; | |
| current->flags |= PF_LOCAL_THROTTLE | PF_MEMALLOC_NOIO; | |
| spin_lock_irq(&lo->lo_work_lock); | |
| while (!list_empty(cmd_list)) { | |
| cmd = container_of( | |
| cmd_list->next, struct loop_cmd, list_entry); | |
| list_del(cmd_list->next); | |
| spin_unlock_irq(&lo->lo_work_lock); | |
| loop_handle_cmd(cmd); | |
| cond_resched(); | |
| spin_lock_irq(&lo->lo_work_lock); | |
| } | |
| /* | |
| * We only add to the idle list if there are no pending cmds | |
| * *and* the worker will not run again which ensures that it | |
| * is safe to free any worker on the idle list | |
| */ | |
| if (worker && !work_pending(&worker->work)) { | |
| worker->last_ran_at = jiffies; | |
| list_add_tail(&worker->idle_list, &lo->idle_worker_list); | |
| loop_set_timer(lo); | |
| } | |
| spin_unlock_irq(&lo->lo_work_lock); | |
| current->flags = orig_flags; | |
| } | |
| static void loop_workfn(struct work_struct *work) | |
| { | |
| struct loop_worker *worker = | |
| container_of(work, struct loop_worker, work); | |
| loop_process_work(worker, &worker->cmd_list, worker->lo); | |
| } | |
| static void loop_rootcg_workfn(struct work_struct *work) | |
| { | |
| struct loop_device *lo = | |
| container_of(work, struct loop_device, rootcg_work); | |
| loop_process_work(NULL, &lo->rootcg_cmd_list, lo); | |
| } | |
| static const struct blk_mq_ops loop_mq_ops = { | |
| .queue_rq = loop_queue_rq, | |
| .complete = lo_complete_rq, | |
| }; | |
| static int loop_add(int i) | |
| { | |
| struct queue_limits lim = { | |
| /* | |
| * Random number picked from the historic block max_sectors cap. | |
| */ | |
| .max_hw_sectors = 2560u, | |
| }; | |
| struct loop_device *lo; | |
| struct gendisk *disk; | |
| int err; | |
| err = -ENOMEM; | |
| lo = kzalloc(sizeof(*lo), GFP_KERNEL); | |
| if (!lo) | |
| goto out; | |
| lo->worker_tree = RB_ROOT; | |
| INIT_LIST_HEAD(&lo->idle_worker_list); | |
| timer_setup(&lo->timer, loop_free_idle_workers_timer, TIMER_DEFERRABLE); | |
| lo->lo_state = Lo_unbound; | |
| err = mutex_lock_killable(&loop_ctl_mutex); | |
| if (err) | |
| goto out_free_dev; | |
| /* allocate id, if @id >= 0, we're requesting that specific id */ | |
| if (i >= 0) { | |
| err = idr_alloc(&loop_index_idr, lo, i, i + 1, GFP_KERNEL); | |
| if (err == -ENOSPC) | |
| err = -EEXIST; | |
| } else { | |
| err = idr_alloc(&loop_index_idr, lo, 0, 0, GFP_KERNEL); | |
| } | |
| mutex_unlock(&loop_ctl_mutex); | |
| if (err < 0) | |
| goto out_free_dev; | |
| i = err; | |
| lo->tag_set.ops = &loop_mq_ops; | |
| lo->tag_set.nr_hw_queues = 1; | |
| lo->tag_set.queue_depth = hw_queue_depth; | |
| lo->tag_set.numa_node = NUMA_NO_NODE; | |
| lo->tag_set.cmd_size = sizeof(struct loop_cmd); | |
| lo->tag_set.flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_STACKING | | |
| BLK_MQ_F_NO_SCHED_BY_DEFAULT; | |
| lo->tag_set.driver_data = lo; | |
| err = blk_mq_alloc_tag_set(&lo->tag_set); | |
| if (err) | |
| goto out_free_idr; | |
| disk = lo->lo_disk = blk_mq_alloc_disk(&lo->tag_set, &lim, lo); | |
| if (IS_ERR(disk)) { | |
| err = PTR_ERR(disk); | |
| goto out_cleanup_tags; | |
| } | |
| lo->lo_queue = lo->lo_disk->queue; | |
| /* | |
| * Disable partition scanning by default. The in-kernel partition | |
| * scanning can be requested individually per-device during its | |
| * setup. Userspace can always add and remove partitions from all | |
| * devices. The needed partition minors are allocated from the | |
| * extended minor space, the main loop device numbers will continue | |
| * to match the loop minors, regardless of the number of partitions | |
| * used. | |
| * | |
| * If max_part is given, partition scanning is globally enabled for | |
| * all loop devices. The minors for the main loop devices will be | |
| * multiples of max_part. | |
| * | |
| * Note: Global-for-all-devices, set-only-at-init, read-only module | |
| * parameteters like 'max_loop' and 'max_part' make things needlessly | |
| * complicated, are too static, inflexible and may surprise | |
| * userspace tools. Parameters like this in general should be avoided. | |
| */ | |
| if (!part_shift) | |
| set_bit(GD_SUPPRESS_PART_SCAN, &disk->state); | |
| mutex_init(&lo->lo_mutex); | |
| lo->lo_number = i; | |
| spin_lock_init(&lo->lo_lock); | |
| spin_lock_init(&lo->lo_work_lock); | |
| INIT_WORK(&lo->rootcg_work, loop_rootcg_workfn); | |
| INIT_LIST_HEAD(&lo->rootcg_cmd_list); | |
| disk->major = LOOP_MAJOR; | |
| disk->first_minor = i << part_shift; | |
| disk->minors = 1 << part_shift; | |
| disk->fops = &lo_fops; | |
| disk->private_data = lo; | |
| disk->queue = lo->lo_queue; | |
| disk->events = DISK_EVENT_MEDIA_CHANGE; | |
| disk->event_flags = DISK_EVENT_FLAG_UEVENT; | |
| sprintf(disk->disk_name, "loop%d", i); | |
| /* Make this loop device reachable from pathname. */ | |
| err = add_disk(disk); | |
| if (err) | |
| goto out_cleanup_disk; | |
| /* Show this loop device. */ | |
| mutex_lock(&loop_ctl_mutex); | |
| lo->idr_visible = true; | |
| mutex_unlock(&loop_ctl_mutex); | |
| return i; | |
| out_cleanup_disk: | |
| put_disk(disk); | |
| out_cleanup_tags: | |
| blk_mq_free_tag_set(&lo->tag_set); | |
| out_free_idr: | |
| mutex_lock(&loop_ctl_mutex); | |
| idr_remove(&loop_index_idr, i); | |
| mutex_unlock(&loop_ctl_mutex); | |
| out_free_dev: | |
| kfree(lo); | |
| out: | |
| return err; | |
| } | |
| static void loop_remove(struct loop_device *lo) | |
| { | |
| /* Make this loop device unreachable from pathname. */ | |
| del_gendisk(lo->lo_disk); | |
| blk_mq_free_tag_set(&lo->tag_set); | |
| mutex_lock(&loop_ctl_mutex); | |
| idr_remove(&loop_index_idr, lo->lo_number); | |
| mutex_unlock(&loop_ctl_mutex); | |
| put_disk(lo->lo_disk); | |
| } | |
| #ifdef CONFIG_BLOCK_LEGACY_AUTOLOAD | |
| static void loop_probe(dev_t dev) | |
| { | |
| int idx = MINOR(dev) >> part_shift; | |
| if (max_loop_specified && max_loop && idx >= max_loop) | |
| return; | |
| loop_add(idx); | |
| } | |
| #else | |
| #define loop_probe NULL | |
| #endif /* !CONFIG_BLOCK_LEGACY_AUTOLOAD */ | |
| static int loop_control_remove(int idx) | |
| { | |
| struct loop_device *lo; | |
| int ret; | |
| if (idx < 0) { | |
| pr_warn_once("deleting an unspecified loop device is not supported.\n"); | |
| return -EINVAL; | |
| } | |
| /* Hide this loop device for serialization. */ | |
| ret = mutex_lock_killable(&loop_ctl_mutex); | |
| if (ret) | |
| return ret; | |
| lo = idr_find(&loop_index_idr, idx); | |
| if (!lo || !lo->idr_visible) | |
| ret = -ENODEV; | |
| else | |
| lo->idr_visible = false; | |
| mutex_unlock(&loop_ctl_mutex); | |
| if (ret) | |
| return ret; | |
| /* Check whether this loop device can be removed. */ | |
| ret = mutex_lock_killable(&lo->lo_mutex); | |
| if (ret) | |
| goto mark_visible; | |
| if (lo->lo_state != Lo_unbound || disk_openers(lo->lo_disk) > 0) { | |
| mutex_unlock(&lo->lo_mutex); | |
| ret = -EBUSY; | |
| goto mark_visible; | |
| } | |
| /* Mark this loop device as no more bound, but not quite unbound yet */ | |
| lo->lo_state = Lo_deleting; | |
| mutex_unlock(&lo->lo_mutex); | |
| loop_remove(lo); | |
| return 0; | |
| mark_visible: | |
| /* Show this loop device again. */ | |
| mutex_lock(&loop_ctl_mutex); | |
| lo->idr_visible = true; | |
| mutex_unlock(&loop_ctl_mutex); | |
| return ret; | |
| } | |
| static int loop_control_get_free(int idx) | |
| { | |
| struct loop_device *lo; | |
| int id, ret; | |
| ret = mutex_lock_killable(&loop_ctl_mutex); | |
| if (ret) | |
| return ret; | |
| idr_for_each_entry(&loop_index_idr, lo, id) { | |
| /* Hitting a race results in creating a new loop device which is harmless. */ | |
| if (lo->idr_visible && data_race(lo->lo_state) == Lo_unbound) | |
| goto found; | |
| } | |
| mutex_unlock(&loop_ctl_mutex); | |
| return loop_add(-1); | |
| found: | |
| mutex_unlock(&loop_ctl_mutex); | |
| return id; | |
| } | |
| static long loop_control_ioctl(struct file *file, unsigned int cmd, | |
| unsigned long parm) | |
| { | |
| switch (cmd) { | |
| case LOOP_CTL_ADD: | |
| return loop_add(parm); | |
| case LOOP_CTL_REMOVE: | |
| return loop_control_remove(parm); | |
| case LOOP_CTL_GET_FREE: | |
| return loop_control_get_free(parm); | |
| default: | |
| return -ENOSYS; | |
| } | |
| } | |
| static const struct file_operations loop_ctl_fops = { | |
| .open = nonseekable_open, | |
| .unlocked_ioctl = loop_control_ioctl, | |
| .compat_ioctl = loop_control_ioctl, | |
| .owner = THIS_MODULE, | |
| .llseek = noop_llseek, | |
| }; | |
| static struct miscdevice loop_misc = { | |
| .minor = LOOP_CTRL_MINOR, | |
| .name = "loop-control", | |
| .fops = &loop_ctl_fops, | |
| }; | |
| MODULE_ALIAS_MISCDEV(LOOP_CTRL_MINOR); | |
| MODULE_ALIAS("devname:loop-control"); | |
| static int __init loop_init(void) | |
| { | |
| int i; | |
| int err; | |
| part_shift = 0; | |
| if (max_part > 0) { | |
| part_shift = fls(max_part); | |
| /* | |
| * Adjust max_part according to part_shift as it is exported | |
| * to user space so that user can decide correct minor number | |
| * if [s]he want to create more devices. | |
| * | |
| * Note that -1 is required because partition 0 is reserved | |
| * for the whole disk. | |
| */ | |
| max_part = (1UL << part_shift) - 1; | |
| } | |
| if ((1UL << part_shift) > DISK_MAX_PARTS) { | |
| err = -EINVAL; | |
| goto err_out; | |
| } | |
| if (max_loop > 1UL << (MINORBITS - part_shift)) { | |
| err = -EINVAL; | |
| goto err_out; | |
| } | |
| err = misc_register(&loop_misc); | |
| if (err < 0) | |
| goto err_out; | |
| if (__register_blkdev(LOOP_MAJOR, "loop", loop_probe)) { | |
| err = -EIO; | |
| goto misc_out; | |
| } | |
| /* pre-create number of devices given by config or max_loop */ | |
| for (i = 0; i < max_loop; i++) | |
| loop_add(i); | |
| printk(KERN_INFO "loop: module loaded\n"); | |
| return 0; | |
| misc_out: | |
| misc_deregister(&loop_misc); | |
| err_out: | |
| return err; | |
| } | |
| static void __exit loop_exit(void) | |
| { | |
| struct loop_device *lo; | |
| int id; | |
| unregister_blkdev(LOOP_MAJOR, "loop"); | |
| misc_deregister(&loop_misc); | |
| /* | |
| * There is no need to use loop_ctl_mutex here, for nobody else can | |
| * access loop_index_idr when this module is unloading (unless forced | |
| * module unloading is requested). If this is not a clean unloading, | |
| * we have no means to avoid kernel crash. | |
| */ | |
| idr_for_each_entry(&loop_index_idr, lo, id) | |
| loop_remove(lo); | |
| idr_destroy(&loop_index_idr); | |
| } | |
| module_init(loop_init); | |
| module_exit(loop_exit); | |
| #ifndef MODULE | |
| static int __init max_loop_setup(char *str) | |
| { | |
| max_loop = simple_strtol(str, NULL, 0); | |
| #ifdef CONFIG_BLOCK_LEGACY_AUTOLOAD | |
| max_loop_specified = true; | |
| #endif | |
| return 1; | |
| } | |
| __setup("max_loop=", max_loop_setup); | |
| #endif |