|  | // SPDX-License-Identifier: GPL-2.0+ | 
|  | /* | 
|  | * Driver for Aeroflex Gaisler GRLIB GRUSBHC EHCI host controller | 
|  | * | 
|  | * GRUSBHC is typically found on LEON/GRLIB SoCs | 
|  | * | 
|  | * (c) Jan Andersson <jan@gaisler.com> | 
|  | * | 
|  | * Based on ehci-ppc-of.c which is: | 
|  | * (c) Valentine Barshak <vbarshak@ru.mvista.com> | 
|  | * and in turn based on "ehci-ppc-soc.c" by Stefan Roese <sr@denx.de> | 
|  | * and "ohci-ppc-of.c" by Sylvain Munaut <tnt@246tNt.com> | 
|  | */ | 
|  |  | 
|  | #include <linux/err.h> | 
|  | #include <linux/signal.h> | 
|  |  | 
|  | #include <linux/of_irq.h> | 
|  | #include <linux/of_address.h> | 
|  | #include <linux/of_platform.h> | 
|  |  | 
|  | #define GRUSBHC_HCIVERSION 0x0100 /* Known value of cap. reg. HCIVERSION */ | 
|  |  | 
|  | static const struct hc_driver ehci_grlib_hc_driver = { | 
|  | .description		= hcd_name, | 
|  | .product_desc		= "GRLIB GRUSBHC EHCI", | 
|  | .hcd_priv_size		= sizeof(struct ehci_hcd), | 
|  |  | 
|  | /* | 
|  | * generic hardware linkage | 
|  | */ | 
|  | .irq			= ehci_irq, | 
|  | .flags			= HCD_MEMORY | HCD_DMA | HCD_USB2 | HCD_BH, | 
|  |  | 
|  | /* | 
|  | * basic lifecycle operations | 
|  | */ | 
|  | .reset			= ehci_setup, | 
|  | .start			= ehci_run, | 
|  | .stop			= ehci_stop, | 
|  | .shutdown		= ehci_shutdown, | 
|  |  | 
|  | /* | 
|  | * managing i/o requests and associated device resources | 
|  | */ | 
|  | .urb_enqueue		= ehci_urb_enqueue, | 
|  | .urb_dequeue		= ehci_urb_dequeue, | 
|  | .endpoint_disable	= ehci_endpoint_disable, | 
|  | .endpoint_reset		= ehci_endpoint_reset, | 
|  |  | 
|  | /* | 
|  | * scheduling support | 
|  | */ | 
|  | .get_frame_number	= ehci_get_frame, | 
|  |  | 
|  | /* | 
|  | * root hub support | 
|  | */ | 
|  | .hub_status_data	= ehci_hub_status_data, | 
|  | .hub_control		= ehci_hub_control, | 
|  | #ifdef	CONFIG_PM | 
|  | .bus_suspend		= ehci_bus_suspend, | 
|  | .bus_resume		= ehci_bus_resume, | 
|  | #endif | 
|  | .relinquish_port	= ehci_relinquish_port, | 
|  | .port_handed_over	= ehci_port_handed_over, | 
|  |  | 
|  | .clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete, | 
|  | }; | 
|  |  | 
|  |  | 
|  | static int ehci_hcd_grlib_probe(struct platform_device *op) | 
|  | { | 
|  | struct device_node *dn = op->dev.of_node; | 
|  | struct usb_hcd *hcd; | 
|  | struct ehci_hcd	*ehci = NULL; | 
|  | struct resource res; | 
|  | u32 hc_capbase; | 
|  | int irq; | 
|  | int rv; | 
|  |  | 
|  | if (usb_disabled()) | 
|  | return -ENODEV; | 
|  |  | 
|  | dev_dbg(&op->dev, "initializing GRUSBHC EHCI USB Controller\n"); | 
|  |  | 
|  | rv = of_address_to_resource(dn, 0, &res); | 
|  | if (rv) | 
|  | return rv; | 
|  |  | 
|  | /* usb_create_hcd requires dma_mask != NULL */ | 
|  | op->dev.dma_mask = &op->dev.coherent_dma_mask; | 
|  | hcd = usb_create_hcd(&ehci_grlib_hc_driver, &op->dev, | 
|  | "GRUSBHC EHCI USB"); | 
|  | if (!hcd) | 
|  | return -ENOMEM; | 
|  |  | 
|  | hcd->rsrc_start = res.start; | 
|  | hcd->rsrc_len = resource_size(&res); | 
|  |  | 
|  | irq = irq_of_parse_and_map(dn, 0); | 
|  | if (!irq) { | 
|  | dev_err(&op->dev, "%s: irq_of_parse_and_map failed\n", | 
|  | __FILE__); | 
|  | rv = -EBUSY; | 
|  | goto err_irq; | 
|  | } | 
|  |  | 
|  | hcd->regs = devm_ioremap_resource(&op->dev, &res); | 
|  | if (IS_ERR(hcd->regs)) { | 
|  | rv = PTR_ERR(hcd->regs); | 
|  | goto err_ioremap; | 
|  | } | 
|  |  | 
|  | ehci = hcd_to_ehci(hcd); | 
|  |  | 
|  | ehci->caps = hcd->regs; | 
|  |  | 
|  | /* determine endianness of this implementation */ | 
|  | hc_capbase = ehci_readl(ehci, &ehci->caps->hc_capbase); | 
|  | if (HC_VERSION(ehci, hc_capbase) != GRUSBHC_HCIVERSION) { | 
|  | ehci->big_endian_mmio = 1; | 
|  | ehci->big_endian_desc = 1; | 
|  | ehci->big_endian_capbase = 1; | 
|  | } | 
|  |  | 
|  | rv = usb_add_hcd(hcd, irq, 0); | 
|  | if (rv) | 
|  | goto err_ioremap; | 
|  |  | 
|  | device_wakeup_enable(hcd->self.controller); | 
|  | return 0; | 
|  |  | 
|  | err_ioremap: | 
|  | irq_dispose_mapping(irq); | 
|  | err_irq: | 
|  | usb_put_hcd(hcd); | 
|  |  | 
|  | return rv; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void ehci_hcd_grlib_remove(struct platform_device *op) | 
|  | { | 
|  | struct usb_hcd *hcd = platform_get_drvdata(op); | 
|  |  | 
|  | dev_dbg(&op->dev, "stopping GRLIB GRUSBHC EHCI USB Controller\n"); | 
|  |  | 
|  | usb_remove_hcd(hcd); | 
|  |  | 
|  | irq_dispose_mapping(hcd->irq); | 
|  |  | 
|  | usb_put_hcd(hcd); | 
|  | } | 
|  |  | 
|  |  | 
|  | static const struct of_device_id ehci_hcd_grlib_of_match[] = { | 
|  | { | 
|  | .name = "GAISLER_EHCI", | 
|  | }, | 
|  | { | 
|  | .name = "01_026", | 
|  | }, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, ehci_hcd_grlib_of_match); | 
|  |  | 
|  |  | 
|  | static struct platform_driver ehci_grlib_driver = { | 
|  | .probe		= ehci_hcd_grlib_probe, | 
|  | .remove_new	= ehci_hcd_grlib_remove, | 
|  | .shutdown	= usb_hcd_platform_shutdown, | 
|  | .driver = { | 
|  | .name = "grlib-ehci", | 
|  | .of_match_table = ehci_hcd_grlib_of_match, | 
|  | }, | 
|  | }; |