| /******************************************************************************* |
| * |
| * Intel 10 Gigabit PCI Express Linux driver |
| * Copyright(c) 2017 Oracle and/or its affiliates. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| * |
| * The full GNU General Public License is included in this distribution in |
| * the file called "COPYING". |
| * |
| * Contact Information: |
| * Linux NICS <linux.nics@intel.com> |
| * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| ******************************************************************************/ |
| |
| #include "ixgbe.h" |
| #include <net/xfrm.h> |
| #include <crypto/aead.h> |
| |
| /** |
| * ixgbe_ipsec_set_tx_sa - set the Tx SA registers |
| * @hw: hw specific details |
| * @idx: register index to write |
| * @key: key byte array |
| * @salt: salt bytes |
| **/ |
| static void ixgbe_ipsec_set_tx_sa(struct ixgbe_hw *hw, u16 idx, |
| u32 key[], u32 salt) |
| { |
| u32 reg; |
| int i; |
| |
| for (i = 0; i < 4; i++) |
| IXGBE_WRITE_REG(hw, IXGBE_IPSTXKEY(i), cpu_to_be32(key[3 - i])); |
| IXGBE_WRITE_REG(hw, IXGBE_IPSTXSALT, cpu_to_be32(salt)); |
| IXGBE_WRITE_FLUSH(hw); |
| |
| reg = IXGBE_READ_REG(hw, IXGBE_IPSTXIDX); |
| reg &= IXGBE_RXTXIDX_IPS_EN; |
| reg |= idx << IXGBE_RXTXIDX_IDX_SHIFT | IXGBE_RXTXIDX_WRITE; |
| IXGBE_WRITE_REG(hw, IXGBE_IPSTXIDX, reg); |
| IXGBE_WRITE_FLUSH(hw); |
| } |
| |
| /** |
| * ixgbe_ipsec_set_rx_item - set an Rx table item |
| * @hw: hw specific details |
| * @idx: register index to write |
| * @tbl: table selector |
| * |
| * Trigger the device to store into a particular Rx table the |
| * data that has already been loaded into the input register |
| **/ |
| static void ixgbe_ipsec_set_rx_item(struct ixgbe_hw *hw, u16 idx, |
| enum ixgbe_ipsec_tbl_sel tbl) |
| { |
| u32 reg; |
| |
| reg = IXGBE_READ_REG(hw, IXGBE_IPSRXIDX); |
| reg &= IXGBE_RXTXIDX_IPS_EN; |
| reg |= tbl << IXGBE_RXIDX_TBL_SHIFT | |
| idx << IXGBE_RXTXIDX_IDX_SHIFT | |
| IXGBE_RXTXIDX_WRITE; |
| IXGBE_WRITE_REG(hw, IXGBE_IPSRXIDX, reg); |
| IXGBE_WRITE_FLUSH(hw); |
| } |
| |
| /** |
| * ixgbe_ipsec_set_rx_sa - set up the register bits to save SA info |
| * @hw: hw specific details |
| * @idx: register index to write |
| * @spi: security parameter index |
| * @key: key byte array |
| * @salt: salt bytes |
| * @mode: rx decrypt control bits |
| * @ip_idx: index into IP table for related IP address |
| **/ |
| static void ixgbe_ipsec_set_rx_sa(struct ixgbe_hw *hw, u16 idx, __be32 spi, |
| u32 key[], u32 salt, u32 mode, u32 ip_idx) |
| { |
| int i; |
| |
| /* store the SPI (in bigendian) and IPidx */ |
| IXGBE_WRITE_REG(hw, IXGBE_IPSRXSPI, cpu_to_le32(spi)); |
| IXGBE_WRITE_REG(hw, IXGBE_IPSRXIPIDX, ip_idx); |
| IXGBE_WRITE_FLUSH(hw); |
| |
| ixgbe_ipsec_set_rx_item(hw, idx, ips_rx_spi_tbl); |
| |
| /* store the key, salt, and mode */ |
| for (i = 0; i < 4; i++) |
| IXGBE_WRITE_REG(hw, IXGBE_IPSRXKEY(i), cpu_to_be32(key[3 - i])); |
| IXGBE_WRITE_REG(hw, IXGBE_IPSRXSALT, cpu_to_be32(salt)); |
| IXGBE_WRITE_REG(hw, IXGBE_IPSRXMOD, mode); |
| IXGBE_WRITE_FLUSH(hw); |
| |
| ixgbe_ipsec_set_rx_item(hw, idx, ips_rx_key_tbl); |
| } |
| |
| /** |
| * ixgbe_ipsec_set_rx_ip - set up the register bits to save SA IP addr info |
| * @hw: hw specific details |
| * @idx: register index to write |
| * @addr: IP address byte array |
| **/ |
| static void ixgbe_ipsec_set_rx_ip(struct ixgbe_hw *hw, u16 idx, __be32 addr[]) |
| { |
| int i; |
| |
| /* store the ip address */ |
| for (i = 0; i < 4; i++) |
| IXGBE_WRITE_REG(hw, IXGBE_IPSRXIPADDR(i), cpu_to_le32(addr[i])); |
| IXGBE_WRITE_FLUSH(hw); |
| |
| ixgbe_ipsec_set_rx_item(hw, idx, ips_rx_ip_tbl); |
| } |
| |
| /** |
| * ixgbe_ipsec_clear_hw_tables - because some tables don't get cleared on reset |
| * @adapter: board private structure |
| **/ |
| static void ixgbe_ipsec_clear_hw_tables(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_ipsec *ipsec = adapter->ipsec; |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 buf[4] = {0, 0, 0, 0}; |
| u16 idx; |
| |
| /* disable Rx and Tx SA lookup */ |
| IXGBE_WRITE_REG(hw, IXGBE_IPSRXIDX, 0); |
| IXGBE_WRITE_REG(hw, IXGBE_IPSTXIDX, 0); |
| |
| /* scrub the tables - split the loops for the max of the IP table */ |
| for (idx = 0; idx < IXGBE_IPSEC_MAX_RX_IP_COUNT; idx++) { |
| ixgbe_ipsec_set_tx_sa(hw, idx, buf, 0); |
| ixgbe_ipsec_set_rx_sa(hw, idx, 0, buf, 0, 0, 0); |
| ixgbe_ipsec_set_rx_ip(hw, idx, (__be32 *)buf); |
| } |
| for (; idx < IXGBE_IPSEC_MAX_SA_COUNT; idx++) { |
| ixgbe_ipsec_set_tx_sa(hw, idx, buf, 0); |
| ixgbe_ipsec_set_rx_sa(hw, idx, 0, buf, 0, 0, 0); |
| } |
| |
| ipsec->num_rx_sa = 0; |
| ipsec->num_tx_sa = 0; |
| } |
| |
| /** |
| * ixgbe_ipsec_stop_data |
| * @adapter: board private structure |
| **/ |
| static void ixgbe_ipsec_stop_data(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| bool link = adapter->link_up; |
| u32 t_rdy, r_rdy; |
| u32 limit; |
| u32 reg; |
| |
| /* halt data paths */ |
| reg = IXGBE_READ_REG(hw, IXGBE_SECTXCTRL); |
| reg |= IXGBE_SECTXCTRL_TX_DIS; |
| IXGBE_WRITE_REG(hw, IXGBE_SECTXCTRL, reg); |
| |
| reg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL); |
| reg |= IXGBE_SECRXCTRL_RX_DIS; |
| IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, reg); |
| |
| IXGBE_WRITE_FLUSH(hw); |
| |
| /* If the tx fifo doesn't have link, but still has data, |
| * we can't clear the tx sec block. Set the MAC loopback |
| * before block clear |
| */ |
| if (!link) { |
| reg = IXGBE_READ_REG(hw, IXGBE_MACC); |
| reg |= IXGBE_MACC_FLU; |
| IXGBE_WRITE_REG(hw, IXGBE_MACC, reg); |
| |
| reg = IXGBE_READ_REG(hw, IXGBE_HLREG0); |
| reg |= IXGBE_HLREG0_LPBK; |
| IXGBE_WRITE_REG(hw, IXGBE_HLREG0, reg); |
| |
| IXGBE_WRITE_FLUSH(hw); |
| mdelay(3); |
| } |
| |
| /* wait for the paths to empty */ |
| limit = 20; |
| do { |
| mdelay(10); |
| t_rdy = IXGBE_READ_REG(hw, IXGBE_SECTXSTAT) & |
| IXGBE_SECTXSTAT_SECTX_RDY; |
| r_rdy = IXGBE_READ_REG(hw, IXGBE_SECRXSTAT) & |
| IXGBE_SECRXSTAT_SECRX_RDY; |
| } while (!t_rdy && !r_rdy && limit--); |
| |
| /* undo loopback if we played with it earlier */ |
| if (!link) { |
| reg = IXGBE_READ_REG(hw, IXGBE_MACC); |
| reg &= ~IXGBE_MACC_FLU; |
| IXGBE_WRITE_REG(hw, IXGBE_MACC, reg); |
| |
| reg = IXGBE_READ_REG(hw, IXGBE_HLREG0); |
| reg &= ~IXGBE_HLREG0_LPBK; |
| IXGBE_WRITE_REG(hw, IXGBE_HLREG0, reg); |
| |
| IXGBE_WRITE_FLUSH(hw); |
| } |
| } |
| |
| /** |
| * ixgbe_ipsec_stop_engine |
| * @adapter: board private structure |
| **/ |
| static void ixgbe_ipsec_stop_engine(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 reg; |
| |
| ixgbe_ipsec_stop_data(adapter); |
| |
| /* disable Rx and Tx SA lookup */ |
| IXGBE_WRITE_REG(hw, IXGBE_IPSTXIDX, 0); |
| IXGBE_WRITE_REG(hw, IXGBE_IPSRXIDX, 0); |
| |
| /* disable the Rx and Tx engines and full packet store-n-forward */ |
| reg = IXGBE_READ_REG(hw, IXGBE_SECTXCTRL); |
| reg |= IXGBE_SECTXCTRL_SECTX_DIS; |
| reg &= ~IXGBE_SECTXCTRL_STORE_FORWARD; |
| IXGBE_WRITE_REG(hw, IXGBE_SECTXCTRL, reg); |
| |
| reg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL); |
| reg |= IXGBE_SECRXCTRL_SECRX_DIS; |
| IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, reg); |
| |
| /* restore the "tx security buffer almost full threshold" to 0x250 */ |
| IXGBE_WRITE_REG(hw, IXGBE_SECTXBUFFAF, 0x250); |
| |
| /* Set minimum IFG between packets back to the default 0x1 */ |
| reg = IXGBE_READ_REG(hw, IXGBE_SECTXMINIFG); |
| reg = (reg & 0xfffffff0) | 0x1; |
| IXGBE_WRITE_REG(hw, IXGBE_SECTXMINIFG, reg); |
| |
| /* final set for normal (no ipsec offload) processing */ |
| IXGBE_WRITE_REG(hw, IXGBE_SECTXCTRL, IXGBE_SECTXCTRL_SECTX_DIS); |
| IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, IXGBE_SECRXCTRL_SECRX_DIS); |
| |
| IXGBE_WRITE_FLUSH(hw); |
| } |
| |
| /** |
| * ixgbe_ipsec_start_engine |
| * @adapter: board private structure |
| * |
| * NOTE: this increases power consumption whether being used or not |
| **/ |
| static void ixgbe_ipsec_start_engine(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 reg; |
| |
| ixgbe_ipsec_stop_data(adapter); |
| |
| /* Set minimum IFG between packets to 3 */ |
| reg = IXGBE_READ_REG(hw, IXGBE_SECTXMINIFG); |
| reg = (reg & 0xfffffff0) | 0x3; |
| IXGBE_WRITE_REG(hw, IXGBE_SECTXMINIFG, reg); |
| |
| /* Set "tx security buffer almost full threshold" to 0x15 so that the |
| * almost full indication is generated only after buffer contains at |
| * least an entire jumbo packet. |
| */ |
| reg = IXGBE_READ_REG(hw, IXGBE_SECTXBUFFAF); |
| reg = (reg & 0xfffffc00) | 0x15; |
| IXGBE_WRITE_REG(hw, IXGBE_SECTXBUFFAF, reg); |
| |
| /* restart the data paths by clearing the DISABLE bits */ |
| IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, 0); |
| IXGBE_WRITE_REG(hw, IXGBE_SECTXCTRL, IXGBE_SECTXCTRL_STORE_FORWARD); |
| |
| /* enable Rx and Tx SA lookup */ |
| IXGBE_WRITE_REG(hw, IXGBE_IPSTXIDX, IXGBE_RXTXIDX_IPS_EN); |
| IXGBE_WRITE_REG(hw, IXGBE_IPSRXIDX, IXGBE_RXTXIDX_IPS_EN); |
| |
| IXGBE_WRITE_FLUSH(hw); |
| } |
| |
| /** |
| * ixgbe_ipsec_restore - restore the ipsec HW settings after a reset |
| * @adapter: board private structure |
| **/ |
| void ixgbe_ipsec_restore(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_ipsec *ipsec = adapter->ipsec; |
| struct ixgbe_hw *hw = &adapter->hw; |
| int i; |
| |
| if (!(adapter->flags2 & IXGBE_FLAG2_IPSEC_ENABLED)) |
| return; |
| |
| /* clean up and restart the engine */ |
| ixgbe_ipsec_stop_engine(adapter); |
| ixgbe_ipsec_clear_hw_tables(adapter); |
| ixgbe_ipsec_start_engine(adapter); |
| |
| /* reload the IP addrs */ |
| for (i = 0; i < IXGBE_IPSEC_MAX_RX_IP_COUNT; i++) { |
| struct rx_ip_sa *ipsa = &ipsec->ip_tbl[i]; |
| |
| if (ipsa->used) |
| ixgbe_ipsec_set_rx_ip(hw, i, ipsa->ipaddr); |
| } |
| |
| /* reload the Rx and Tx keys */ |
| for (i = 0; i < IXGBE_IPSEC_MAX_SA_COUNT; i++) { |
| struct rx_sa *rsa = &ipsec->rx_tbl[i]; |
| struct tx_sa *tsa = &ipsec->tx_tbl[i]; |
| |
| if (rsa->used) |
| ixgbe_ipsec_set_rx_sa(hw, i, rsa->xs->id.spi, |
| rsa->key, rsa->salt, |
| rsa->mode, rsa->iptbl_ind); |
| |
| if (tsa->used) |
| ixgbe_ipsec_set_tx_sa(hw, i, tsa->key, tsa->salt); |
| } |
| } |
| |
| /** |
| * ixgbe_ipsec_find_empty_idx - find the first unused security parameter index |
| * @ipsec: pointer to ipsec struct |
| * @rxtable: true if we need to look in the Rx table |
| * |
| * Returns the first unused index in either the Rx or Tx SA table |
| **/ |
| static int ixgbe_ipsec_find_empty_idx(struct ixgbe_ipsec *ipsec, bool rxtable) |
| { |
| u32 i; |
| |
| if (rxtable) { |
| if (ipsec->num_rx_sa == IXGBE_IPSEC_MAX_SA_COUNT) |
| return -ENOSPC; |
| |
| /* search rx sa table */ |
| for (i = 0; i < IXGBE_IPSEC_MAX_SA_COUNT; i++) { |
| if (!ipsec->rx_tbl[i].used) |
| return i; |
| } |
| } else { |
| if (ipsec->num_tx_sa == IXGBE_IPSEC_MAX_SA_COUNT) |
| return -ENOSPC; |
| |
| /* search tx sa table */ |
| for (i = 0; i < IXGBE_IPSEC_MAX_SA_COUNT; i++) { |
| if (!ipsec->tx_tbl[i].used) |
| return i; |
| } |
| } |
| |
| return -ENOSPC; |
| } |
| |
| /** |
| * ixgbe_ipsec_find_rx_state - find the state that matches |
| * @ipsec: pointer to ipsec struct |
| * @daddr: inbound address to match |
| * @proto: protocol to match |
| * @spi: SPI to match |
| * @ip4: true if using an ipv4 address |
| * |
| * Returns a pointer to the matching SA state information |
| **/ |
| static struct xfrm_state *ixgbe_ipsec_find_rx_state(struct ixgbe_ipsec *ipsec, |
| __be32 *daddr, u8 proto, |
| __be32 spi, bool ip4) |
| { |
| struct rx_sa *rsa; |
| struct xfrm_state *ret = NULL; |
| |
| rcu_read_lock(); |
| hash_for_each_possible_rcu(ipsec->rx_sa_list, rsa, hlist, spi) |
| if (spi == rsa->xs->id.spi && |
| ((ip4 && *daddr == rsa->xs->id.daddr.a4) || |
| (!ip4 && !memcmp(daddr, &rsa->xs->id.daddr.a6, |
| sizeof(rsa->xs->id.daddr.a6)))) && |
| proto == rsa->xs->id.proto) { |
| ret = rsa->xs; |
| xfrm_state_hold(ret); |
| break; |
| } |
| rcu_read_unlock(); |
| return ret; |
| } |
| |
| /** |
| * ixgbe_ipsec_parse_proto_keys - find the key and salt based on the protocol |
| * @xs: pointer to xfrm_state struct |
| * @mykey: pointer to key array to populate |
| * @mysalt: pointer to salt value to populate |
| * |
| * This copies the protocol keys and salt to our own data tables. The |
| * 82599 family only supports the one algorithm. |
| **/ |
| static int ixgbe_ipsec_parse_proto_keys(struct xfrm_state *xs, |
| u32 *mykey, u32 *mysalt) |
| { |
| struct net_device *dev = xs->xso.dev; |
| unsigned char *key_data; |
| char *alg_name = NULL; |
| const char aes_gcm_name[] = "rfc4106(gcm(aes))"; |
| int key_len; |
| |
| if (xs->aead) { |
| key_data = &xs->aead->alg_key[0]; |
| key_len = xs->aead->alg_key_len; |
| alg_name = xs->aead->alg_name; |
| } else { |
| netdev_err(dev, "Unsupported IPsec algorithm\n"); |
| return -EINVAL; |
| } |
| |
| if (strcmp(alg_name, aes_gcm_name)) { |
| netdev_err(dev, "Unsupported IPsec algorithm - please use %s\n", |
| aes_gcm_name); |
| return -EINVAL; |
| } |
| |
| /* The key bytes come down in a bigendian array of bytes, so |
| * we don't need to do any byteswapping. |
| * 160 accounts for 16 byte key and 4 byte salt |
| */ |
| if (key_len == 160) { |
| *mysalt = ((u32 *)key_data)[4]; |
| } else if (key_len != 128) { |
| netdev_err(dev, "IPsec hw offload only supports keys up to 128 bits with a 32 bit salt\n"); |
| return -EINVAL; |
| } else { |
| netdev_info(dev, "IPsec hw offload parameters missing 32 bit salt value\n"); |
| *mysalt = 0; |
| } |
| memcpy(mykey, key_data, 16); |
| |
| return 0; |
| } |
| |
| /** |
| * ixgbe_ipsec_add_sa - program device with a security association |
| * @xs: pointer to transformer state struct |
| **/ |
| static int ixgbe_ipsec_add_sa(struct xfrm_state *xs) |
| { |
| struct net_device *dev = xs->xso.dev; |
| struct ixgbe_adapter *adapter = netdev_priv(dev); |
| struct ixgbe_ipsec *ipsec = adapter->ipsec; |
| struct ixgbe_hw *hw = &adapter->hw; |
| int checked, match, first; |
| u16 sa_idx; |
| int ret; |
| int i; |
| |
| if (xs->id.proto != IPPROTO_ESP && xs->id.proto != IPPROTO_AH) { |
| netdev_err(dev, "Unsupported protocol 0x%04x for ipsec offload\n", |
| xs->id.proto); |
| return -EINVAL; |
| } |
| |
| if (xs->xso.flags & XFRM_OFFLOAD_INBOUND) { |
| struct rx_sa rsa; |
| |
| if (xs->calg) { |
| netdev_err(dev, "Compression offload not supported\n"); |
| return -EINVAL; |
| } |
| |
| /* find the first unused index */ |
| ret = ixgbe_ipsec_find_empty_idx(ipsec, true); |
| if (ret < 0) { |
| netdev_err(dev, "No space for SA in Rx table!\n"); |
| return ret; |
| } |
| sa_idx = (u16)ret; |
| |
| memset(&rsa, 0, sizeof(rsa)); |
| rsa.used = true; |
| rsa.xs = xs; |
| |
| if (rsa.xs->id.proto & IPPROTO_ESP) |
| rsa.decrypt = xs->ealg || xs->aead; |
| |
| /* get the key and salt */ |
| ret = ixgbe_ipsec_parse_proto_keys(xs, rsa.key, &rsa.salt); |
| if (ret) { |
| netdev_err(dev, "Failed to get key data for Rx SA table\n"); |
| return ret; |
| } |
| |
| /* get ip for rx sa table */ |
| if (xs->props.family == AF_INET6) |
| memcpy(rsa.ipaddr, &xs->id.daddr.a6, 16); |
| else |
| memcpy(&rsa.ipaddr[3], &xs->id.daddr.a4, 4); |
| |
| /* The HW does not have a 1:1 mapping from keys to IP addrs, so |
| * check for a matching IP addr entry in the table. If the addr |
| * already exists, use it; else find an unused slot and add the |
| * addr. If one does not exist and there are no unused table |
| * entries, fail the request. |
| */ |
| |
| /* Find an existing match or first not used, and stop looking |
| * after we've checked all we know we have. |
| */ |
| checked = 0; |
| match = -1; |
| first = -1; |
| for (i = 0; |
| i < IXGBE_IPSEC_MAX_RX_IP_COUNT && |
| (checked < ipsec->num_rx_sa || first < 0); |
| i++) { |
| if (ipsec->ip_tbl[i].used) { |
| if (!memcmp(ipsec->ip_tbl[i].ipaddr, |
| rsa.ipaddr, sizeof(rsa.ipaddr))) { |
| match = i; |
| break; |
| } |
| checked++; |
| } else if (first < 0) { |
| first = i; /* track the first empty seen */ |
| } |
| } |
| |
| if (ipsec->num_rx_sa == 0) |
| first = 0; |
| |
| if (match >= 0) { |
| /* addrs are the same, we should use this one */ |
| rsa.iptbl_ind = match; |
| ipsec->ip_tbl[match].ref_cnt++; |
| |
| } else if (first >= 0) { |
| /* no matches, but here's an empty slot */ |
| rsa.iptbl_ind = first; |
| |
| memcpy(ipsec->ip_tbl[first].ipaddr, |
| rsa.ipaddr, sizeof(rsa.ipaddr)); |
| ipsec->ip_tbl[first].ref_cnt = 1; |
| ipsec->ip_tbl[first].used = true; |
| |
| ixgbe_ipsec_set_rx_ip(hw, rsa.iptbl_ind, rsa.ipaddr); |
| |
| } else { |
| /* no match and no empty slot */ |
| netdev_err(dev, "No space for SA in Rx IP SA table\n"); |
| memset(&rsa, 0, sizeof(rsa)); |
| return -ENOSPC; |
| } |
| |
| rsa.mode = IXGBE_RXMOD_VALID; |
| if (rsa.xs->id.proto & IPPROTO_ESP) |
| rsa.mode |= IXGBE_RXMOD_PROTO_ESP; |
| if (rsa.decrypt) |
| rsa.mode |= IXGBE_RXMOD_DECRYPT; |
| if (rsa.xs->props.family == AF_INET6) |
| rsa.mode |= IXGBE_RXMOD_IPV6; |
| |
| /* the preparations worked, so save the info */ |
| memcpy(&ipsec->rx_tbl[sa_idx], &rsa, sizeof(rsa)); |
| |
| ixgbe_ipsec_set_rx_sa(hw, sa_idx, rsa.xs->id.spi, rsa.key, |
| rsa.salt, rsa.mode, rsa.iptbl_ind); |
| xs->xso.offload_handle = sa_idx + IXGBE_IPSEC_BASE_RX_INDEX; |
| |
| ipsec->num_rx_sa++; |
| |
| /* hash the new entry for faster search in Rx path */ |
| hash_add_rcu(ipsec->rx_sa_list, &ipsec->rx_tbl[sa_idx].hlist, |
| rsa.xs->id.spi); |
| } else { |
| struct tx_sa tsa; |
| |
| /* find the first unused index */ |
| ret = ixgbe_ipsec_find_empty_idx(ipsec, false); |
| if (ret < 0) { |
| netdev_err(dev, "No space for SA in Tx table\n"); |
| return ret; |
| } |
| sa_idx = (u16)ret; |
| |
| memset(&tsa, 0, sizeof(tsa)); |
| tsa.used = true; |
| tsa.xs = xs; |
| |
| if (xs->id.proto & IPPROTO_ESP) |
| tsa.encrypt = xs->ealg || xs->aead; |
| |
| ret = ixgbe_ipsec_parse_proto_keys(xs, tsa.key, &tsa.salt); |
| if (ret) { |
| netdev_err(dev, "Failed to get key data for Tx SA table\n"); |
| memset(&tsa, 0, sizeof(tsa)); |
| return ret; |
| } |
| |
| /* the preparations worked, so save the info */ |
| memcpy(&ipsec->tx_tbl[sa_idx], &tsa, sizeof(tsa)); |
| |
| ixgbe_ipsec_set_tx_sa(hw, sa_idx, tsa.key, tsa.salt); |
| |
| xs->xso.offload_handle = sa_idx + IXGBE_IPSEC_BASE_TX_INDEX; |
| |
| ipsec->num_tx_sa++; |
| } |
| |
| /* enable the engine if not already warmed up */ |
| if (!(adapter->flags2 & IXGBE_FLAG2_IPSEC_ENABLED)) { |
| ixgbe_ipsec_start_engine(adapter); |
| adapter->flags2 |= IXGBE_FLAG2_IPSEC_ENABLED; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ixgbe_ipsec_del_sa - clear out this specific SA |
| * @xs: pointer to transformer state struct |
| **/ |
| static void ixgbe_ipsec_del_sa(struct xfrm_state *xs) |
| { |
| struct net_device *dev = xs->xso.dev; |
| struct ixgbe_adapter *adapter = netdev_priv(dev); |
| struct ixgbe_ipsec *ipsec = adapter->ipsec; |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 zerobuf[4] = {0, 0, 0, 0}; |
| u16 sa_idx; |
| |
| if (xs->xso.flags & XFRM_OFFLOAD_INBOUND) { |
| struct rx_sa *rsa; |
| u8 ipi; |
| |
| sa_idx = xs->xso.offload_handle - IXGBE_IPSEC_BASE_RX_INDEX; |
| rsa = &ipsec->rx_tbl[sa_idx]; |
| |
| if (!rsa->used) { |
| netdev_err(dev, "Invalid Rx SA selected sa_idx=%d offload_handle=%lu\n", |
| sa_idx, xs->xso.offload_handle); |
| return; |
| } |
| |
| ixgbe_ipsec_set_rx_sa(hw, sa_idx, 0, zerobuf, 0, 0, 0); |
| hash_del_rcu(&rsa->hlist); |
| |
| /* if the IP table entry is referenced by only this SA, |
| * i.e. ref_cnt is only 1, clear the IP table entry as well |
| */ |
| ipi = rsa->iptbl_ind; |
| if (ipsec->ip_tbl[ipi].ref_cnt > 0) { |
| ipsec->ip_tbl[ipi].ref_cnt--; |
| |
| if (!ipsec->ip_tbl[ipi].ref_cnt) { |
| memset(&ipsec->ip_tbl[ipi], 0, |
| sizeof(struct rx_ip_sa)); |
| ixgbe_ipsec_set_rx_ip(hw, ipi, zerobuf); |
| } |
| } |
| |
| memset(rsa, 0, sizeof(struct rx_sa)); |
| ipsec->num_rx_sa--; |
| } else { |
| sa_idx = xs->xso.offload_handle - IXGBE_IPSEC_BASE_TX_INDEX; |
| |
| if (!ipsec->tx_tbl[sa_idx].used) { |
| netdev_err(dev, "Invalid Tx SA selected sa_idx=%d offload_handle=%lu\n", |
| sa_idx, xs->xso.offload_handle); |
| return; |
| } |
| |
| ixgbe_ipsec_set_tx_sa(hw, sa_idx, zerobuf, 0); |
| memset(&ipsec->tx_tbl[sa_idx], 0, sizeof(struct tx_sa)); |
| ipsec->num_tx_sa--; |
| } |
| |
| /* if there are no SAs left, stop the engine to save energy */ |
| if (ipsec->num_rx_sa == 0 && ipsec->num_tx_sa == 0) { |
| adapter->flags2 &= ~IXGBE_FLAG2_IPSEC_ENABLED; |
| ixgbe_ipsec_stop_engine(adapter); |
| } |
| } |
| |
| /** |
| * ixgbe_ipsec_offload_ok - can this packet use the xfrm hw offload |
| * @skb: current data packet |
| * @xs: pointer to transformer state struct |
| **/ |
| static bool ixgbe_ipsec_offload_ok(struct sk_buff *skb, struct xfrm_state *xs) |
| { |
| if (xs->props.family == AF_INET) { |
| /* Offload with IPv4 options is not supported yet */ |
| if (ip_hdr(skb)->ihl != 5) |
| return false; |
| } else { |
| /* Offload with IPv6 extension headers is not support yet */ |
| if (ipv6_ext_hdr(ipv6_hdr(skb)->nexthdr)) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /** |
| * ixgbe_ipsec_free - called by xfrm garbage collections |
| * @xs: pointer to transformer state struct |
| * |
| * We don't have any garbage to collect, so we shouldn't bother |
| * implementing this function, but the XFRM code doesn't check for |
| * existence before calling the API callback. |
| **/ |
| static void ixgbe_ipsec_free(struct xfrm_state *xs) |
| { |
| } |
| |
| static const struct xfrmdev_ops ixgbe_xfrmdev_ops = { |
| .xdo_dev_state_add = ixgbe_ipsec_add_sa, |
| .xdo_dev_state_delete = ixgbe_ipsec_del_sa, |
| .xdo_dev_offload_ok = ixgbe_ipsec_offload_ok, |
| .xdo_dev_state_free = ixgbe_ipsec_free, |
| }; |
| |
| /** |
| * ixgbe_ipsec_tx - setup Tx flags for ipsec offload |
| * @tx_ring: outgoing context |
| * @first: current data packet |
| * @itd: ipsec Tx data for later use in building context descriptor |
| **/ |
| int ixgbe_ipsec_tx(struct ixgbe_ring *tx_ring, |
| struct ixgbe_tx_buffer *first, |
| struct ixgbe_ipsec_tx_data *itd) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(tx_ring->netdev); |
| struct ixgbe_ipsec *ipsec = adapter->ipsec; |
| struct xfrm_state *xs; |
| struct tx_sa *tsa; |
| |
| if (unlikely(!first->skb->sp->len)) { |
| netdev_err(tx_ring->netdev, "%s: no xfrm state len = %d\n", |
| __func__, first->skb->sp->len); |
| return 0; |
| } |
| |
| xs = xfrm_input_state(first->skb); |
| if (unlikely(!xs)) { |
| netdev_err(tx_ring->netdev, "%s: no xfrm_input_state() xs = %p\n", |
| __func__, xs); |
| return 0; |
| } |
| |
| itd->sa_idx = xs->xso.offload_handle - IXGBE_IPSEC_BASE_TX_INDEX; |
| if (unlikely(itd->sa_idx > IXGBE_IPSEC_MAX_SA_COUNT)) { |
| netdev_err(tx_ring->netdev, "%s: bad sa_idx=%d handle=%lu\n", |
| __func__, itd->sa_idx, xs->xso.offload_handle); |
| return 0; |
| } |
| |
| tsa = &ipsec->tx_tbl[itd->sa_idx]; |
| if (unlikely(!tsa->used)) { |
| netdev_err(tx_ring->netdev, "%s: unused sa_idx=%d\n", |
| __func__, itd->sa_idx); |
| return 0; |
| } |
| |
| first->tx_flags |= IXGBE_TX_FLAGS_IPSEC | IXGBE_TX_FLAGS_CC; |
| |
| itd->flags = 0; |
| if (xs->id.proto == IPPROTO_ESP) { |
| itd->flags |= IXGBE_ADVTXD_TUCMD_IPSEC_TYPE_ESP | |
| IXGBE_ADVTXD_TUCMD_L4T_TCP; |
| if (first->protocol == htons(ETH_P_IP)) |
| itd->flags |= IXGBE_ADVTXD_TUCMD_IPV4; |
| itd->trailer_len = xs->props.trailer_len; |
| } |
| if (tsa->encrypt) |
| itd->flags |= IXGBE_ADVTXD_TUCMD_IPSEC_ENCRYPT_EN; |
| |
| return 1; |
| } |
| |
| /** |
| * ixgbe_ipsec_rx - decode ipsec bits from Rx descriptor |
| * @rx_ring: receiving ring |
| * @rx_desc: receive data descriptor |
| * @skb: current data packet |
| * |
| * Determine if there was an ipsec encapsulation noticed, and if so set up |
| * the resulting status for later in the receive stack. |
| **/ |
| void ixgbe_ipsec_rx(struct ixgbe_ring *rx_ring, |
| union ixgbe_adv_rx_desc *rx_desc, |
| struct sk_buff *skb) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(rx_ring->netdev); |
| __le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info; |
| __le16 ipsec_pkt_types = cpu_to_le16(IXGBE_RXDADV_PKTTYPE_IPSEC_AH | |
| IXGBE_RXDADV_PKTTYPE_IPSEC_ESP); |
| struct ixgbe_ipsec *ipsec = adapter->ipsec; |
| struct xfrm_offload *xo = NULL; |
| struct xfrm_state *xs = NULL; |
| struct ipv6hdr *ip6 = NULL; |
| struct iphdr *ip4 = NULL; |
| void *daddr; |
| __be32 spi; |
| u8 *c_hdr; |
| u8 proto; |
| |
| /* Find the ip and crypto headers in the data. |
| * We can assume no vlan header in the way, b/c the |
| * hw won't recognize the IPsec packet and anyway the |
| * currently vlan device doesn't support xfrm offload. |
| */ |
| if (pkt_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_IPV4)) { |
| ip4 = (struct iphdr *)(skb->data + ETH_HLEN); |
| daddr = &ip4->daddr; |
| c_hdr = (u8 *)ip4 + ip4->ihl * 4; |
| } else if (pkt_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_IPV6)) { |
| ip6 = (struct ipv6hdr *)(skb->data + ETH_HLEN); |
| daddr = &ip6->daddr; |
| c_hdr = (u8 *)ip6 + sizeof(struct ipv6hdr); |
| } else { |
| return; |
| } |
| |
| switch (pkt_info & ipsec_pkt_types) { |
| case cpu_to_le16(IXGBE_RXDADV_PKTTYPE_IPSEC_AH): |
| spi = ((struct ip_auth_hdr *)c_hdr)->spi; |
| proto = IPPROTO_AH; |
| break; |
| case cpu_to_le16(IXGBE_RXDADV_PKTTYPE_IPSEC_ESP): |
| spi = ((struct ip_esp_hdr *)c_hdr)->spi; |
| proto = IPPROTO_ESP; |
| break; |
| default: |
| return; |
| } |
| |
| xs = ixgbe_ipsec_find_rx_state(ipsec, daddr, proto, spi, !!ip4); |
| if (unlikely(!xs)) |
| return; |
| |
| skb->sp = secpath_dup(skb->sp); |
| if (unlikely(!skb->sp)) |
| return; |
| |
| skb->sp->xvec[skb->sp->len++] = xs; |
| skb->sp->olen++; |
| xo = xfrm_offload(skb); |
| xo->flags = CRYPTO_DONE; |
| xo->status = CRYPTO_SUCCESS; |
| |
| adapter->rx_ipsec++; |
| } |
| |
| /** |
| * ixgbe_init_ipsec_offload - initialize security registers for IPSec operation |
| * @adapter: board private structure |
| **/ |
| void ixgbe_init_ipsec_offload(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_ipsec *ipsec; |
| size_t size; |
| |
| if (adapter->hw.mac.type == ixgbe_mac_82598EB) |
| return; |
| |
| ipsec = kzalloc(sizeof(*ipsec), GFP_KERNEL); |
| if (!ipsec) |
| goto err1; |
| hash_init(ipsec->rx_sa_list); |
| |
| size = sizeof(struct rx_sa) * IXGBE_IPSEC_MAX_SA_COUNT; |
| ipsec->rx_tbl = kzalloc(size, GFP_KERNEL); |
| if (!ipsec->rx_tbl) |
| goto err2; |
| |
| size = sizeof(struct tx_sa) * IXGBE_IPSEC_MAX_SA_COUNT; |
| ipsec->tx_tbl = kzalloc(size, GFP_KERNEL); |
| if (!ipsec->tx_tbl) |
| goto err2; |
| |
| size = sizeof(struct rx_ip_sa) * IXGBE_IPSEC_MAX_RX_IP_COUNT; |
| ipsec->ip_tbl = kzalloc(size, GFP_KERNEL); |
| if (!ipsec->ip_tbl) |
| goto err2; |
| |
| ipsec->num_rx_sa = 0; |
| ipsec->num_tx_sa = 0; |
| |
| adapter->ipsec = ipsec; |
| ixgbe_ipsec_stop_engine(adapter); |
| ixgbe_ipsec_clear_hw_tables(adapter); |
| |
| adapter->netdev->xfrmdev_ops = &ixgbe_xfrmdev_ops; |
| adapter->netdev->features |= NETIF_F_HW_ESP; |
| adapter->netdev->hw_enc_features |= NETIF_F_HW_ESP; |
| |
| return; |
| |
| err2: |
| kfree(ipsec->ip_tbl); |
| kfree(ipsec->rx_tbl); |
| kfree(ipsec->tx_tbl); |
| err1: |
| kfree(adapter->ipsec); |
| netdev_err(adapter->netdev, "Unable to allocate memory for SA tables"); |
| } |
| |
| /** |
| * ixgbe_stop_ipsec_offload - tear down the ipsec offload |
| * @adapter: board private structure |
| **/ |
| void ixgbe_stop_ipsec_offload(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_ipsec *ipsec = adapter->ipsec; |
| |
| adapter->ipsec = NULL; |
| if (ipsec) { |
| kfree(ipsec->ip_tbl); |
| kfree(ipsec->rx_tbl); |
| kfree(ipsec->tx_tbl); |
| kfree(ipsec); |
| } |
| } |