| /* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */ | 
 | #ifndef FREELIST_H | 
 | #define FREELIST_H | 
 |  | 
 | #include <linux/atomic.h> | 
 |  | 
 | /* | 
 |  * Copyright: cameron@moodycamel.com | 
 |  * | 
 |  * A simple CAS-based lock-free free list. Not the fastest thing in the world | 
 |  * under heavy contention, but simple and correct (assuming nodes are never | 
 |  * freed until after the free list is destroyed), and fairly speedy under low | 
 |  * contention. | 
 |  * | 
 |  * Adapted from: https://moodycamel.com/blog/2014/solving-the-aba-problem-for-lock-free-free-lists | 
 |  */ | 
 |  | 
 | struct freelist_node { | 
 | 	atomic_t		refs; | 
 | 	struct freelist_node	*next; | 
 | }; | 
 |  | 
 | struct freelist_head { | 
 | 	struct freelist_node	*head; | 
 | }; | 
 |  | 
 | #define REFS_ON_FREELIST 0x80000000 | 
 | #define REFS_MASK	 0x7FFFFFFF | 
 |  | 
 | static inline void __freelist_add(struct freelist_node *node, struct freelist_head *list) | 
 | { | 
 | 	/* | 
 | 	 * Since the refcount is zero, and nobody can increase it once it's | 
 | 	 * zero (except us, and we run only one copy of this method per node at | 
 | 	 * a time, i.e. the single thread case), then we know we can safely | 
 | 	 * change the next pointer of the node; however, once the refcount is | 
 | 	 * back above zero, then other threads could increase it (happens under | 
 | 	 * heavy contention, when the refcount goes to zero in between a load | 
 | 	 * and a refcount increment of a node in try_get, then back up to | 
 | 	 * something non-zero, then the refcount increment is done by the other | 
 | 	 * thread) -- so if the CAS to add the node to the actual list fails, | 
 | 	 * decrese the refcount and leave the add operation to the next thread | 
 | 	 * who puts the refcount back to zero (which could be us, hence the | 
 | 	 * loop). | 
 | 	 */ | 
 | 	struct freelist_node *head = READ_ONCE(list->head); | 
 |  | 
 | 	for (;;) { | 
 | 		WRITE_ONCE(node->next, head); | 
 | 		atomic_set_release(&node->refs, 1); | 
 |  | 
 | 		if (!try_cmpxchg_release(&list->head, &head, node)) { | 
 | 			/* | 
 | 			 * Hmm, the add failed, but we can only try again when | 
 | 			 * the refcount goes back to zero. | 
 | 			 */ | 
 | 			if (atomic_fetch_add_release(REFS_ON_FREELIST - 1, &node->refs) == 1) | 
 | 				continue; | 
 | 		} | 
 | 		return; | 
 | 	} | 
 | } | 
 |  | 
 | static inline void freelist_add(struct freelist_node *node, struct freelist_head *list) | 
 | { | 
 | 	/* | 
 | 	 * We know that the should-be-on-freelist bit is 0 at this point, so | 
 | 	 * it's safe to set it using a fetch_add. | 
 | 	 */ | 
 | 	if (!atomic_fetch_add_release(REFS_ON_FREELIST, &node->refs)) { | 
 | 		/* | 
 | 		 * Oh look! We were the last ones referencing this node, and we | 
 | 		 * know we want to add it to the free list, so let's do it! | 
 | 		 */ | 
 | 		__freelist_add(node, list); | 
 | 	} | 
 | } | 
 |  | 
 | static inline struct freelist_node *freelist_try_get(struct freelist_head *list) | 
 | { | 
 | 	struct freelist_node *prev, *next, *head = smp_load_acquire(&list->head); | 
 | 	unsigned int refs; | 
 |  | 
 | 	while (head) { | 
 | 		prev = head; | 
 | 		refs = atomic_read(&head->refs); | 
 | 		if ((refs & REFS_MASK) == 0 || | 
 | 		    !atomic_try_cmpxchg_acquire(&head->refs, &refs, refs+1)) { | 
 | 			head = smp_load_acquire(&list->head); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * Good, reference count has been incremented (it wasn't at | 
 | 		 * zero), which means we can read the next and not worry about | 
 | 		 * it changing between now and the time we do the CAS. | 
 | 		 */ | 
 | 		next = READ_ONCE(head->next); | 
 | 		if (try_cmpxchg_acquire(&list->head, &head, next)) { | 
 | 			/* | 
 | 			 * Yay, got the node. This means it was on the list, | 
 | 			 * which means should-be-on-freelist must be false no | 
 | 			 * matter the refcount (because nobody else knows it's | 
 | 			 * been taken off yet, it can't have been put back on). | 
 | 			 */ | 
 | 			WARN_ON_ONCE(atomic_read(&head->refs) & REFS_ON_FREELIST); | 
 |  | 
 | 			/* | 
 | 			 * Decrease refcount twice, once for our ref, and once | 
 | 			 * for the list's ref. | 
 | 			 */ | 
 | 			atomic_fetch_add(-2, &head->refs); | 
 |  | 
 | 			return head; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * OK, the head must have changed on us, but we still need to decrement | 
 | 		 * the refcount we increased. | 
 | 		 */ | 
 | 		refs = atomic_fetch_add(-1, &prev->refs); | 
 | 		if (refs == REFS_ON_FREELIST + 1) | 
 | 			__freelist_add(prev, list); | 
 | 	} | 
 |  | 
 | 	return NULL; | 
 | } | 
 |  | 
 | #endif /* FREELIST_H */ |