|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * BCM47XX MTD partitioning | 
|  | * | 
|  | * Copyright © 2012 Rafał Miłecki <zajec5@gmail.com> | 
|  | */ | 
|  |  | 
|  | #include <linux/bcm47xx_nvram.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/mtd/mtd.h> | 
|  | #include <linux/mtd/partitions.h> | 
|  |  | 
|  | #include <uapi/linux/magic.h> | 
|  |  | 
|  | /* | 
|  | * NAND flash on Netgear R6250 was verified to contain 15 partitions. | 
|  | * This will result in allocating too big array for some old devices, but the | 
|  | * memory will be freed soon anyway (see mtd_device_parse_register). | 
|  | */ | 
|  | #define BCM47XXPART_MAX_PARTS		20 | 
|  |  | 
|  | /* | 
|  | * Amount of bytes we read when analyzing each block of flash memory. | 
|  | * Set it big enough to allow detecting partition and reading important data. | 
|  | */ | 
|  | #define BCM47XXPART_BYTES_TO_READ	0x4e8 | 
|  |  | 
|  | /* Magics */ | 
|  | #define BOARD_DATA_MAGIC		0x5246504D	/* MPFR */ | 
|  | #define BOARD_DATA_MAGIC2		0xBD0D0BBD | 
|  | #define CFE_MAGIC			0x43464531	/* 1EFC */ | 
|  | #define FACTORY_MAGIC			0x59544346	/* FCTY */ | 
|  | #define NVRAM_HEADER			0x48534C46	/* FLSH */ | 
|  | #define POT_MAGIC1			0x54544f50	/* POTT */ | 
|  | #define POT_MAGIC2			0x504f		/* OP */ | 
|  | #define ML_MAGIC1			0x39685a42 | 
|  | #define ML_MAGIC2			0x26594131 | 
|  | #define TRX_MAGIC			0x30524448 | 
|  | #define SHSQ_MAGIC			0x71736873	/* shsq (weird ZTE H218N endianness) */ | 
|  |  | 
|  | static const char * const trx_types[] = { "trx", NULL }; | 
|  |  | 
|  | struct trx_header { | 
|  | uint32_t magic; | 
|  | uint32_t length; | 
|  | uint32_t crc32; | 
|  | uint16_t flags; | 
|  | uint16_t version; | 
|  | uint32_t offset[3]; | 
|  | } __packed; | 
|  |  | 
|  | static void bcm47xxpart_add_part(struct mtd_partition *part, const char *name, | 
|  | u64 offset, uint32_t mask_flags) | 
|  | { | 
|  | part->name = name; | 
|  | part->offset = offset; | 
|  | part->mask_flags = mask_flags; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * bcm47xxpart_bootpartition - gets index of TRX partition used by bootloader | 
|  | * | 
|  | * Some devices may have more than one TRX partition. In such case one of them | 
|  | * is the main one and another a failsafe one. Bootloader may fallback to the | 
|  | * failsafe firmware if it detects corruption of the main image. | 
|  | * | 
|  | * This function provides info about currently used TRX partition. It's the one | 
|  | * containing kernel started by the bootloader. | 
|  | */ | 
|  | static int bcm47xxpart_bootpartition(void) | 
|  | { | 
|  | char buf[4]; | 
|  | int bootpartition; | 
|  |  | 
|  | /* Check CFE environment variable */ | 
|  | if (bcm47xx_nvram_getenv("bootpartition", buf, sizeof(buf)) > 0) { | 
|  | if (!kstrtoint(buf, 0, &bootpartition)) | 
|  | return bootpartition; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int bcm47xxpart_parse(struct mtd_info *master, | 
|  | const struct mtd_partition **pparts, | 
|  | struct mtd_part_parser_data *data) | 
|  | { | 
|  | struct mtd_partition *parts; | 
|  | uint8_t i, curr_part = 0; | 
|  | uint32_t *buf; | 
|  | size_t bytes_read; | 
|  | uint32_t offset; | 
|  | uint32_t blocksize = master->erasesize; | 
|  | int trx_parts[2]; /* Array with indexes of TRX partitions */ | 
|  | int trx_num = 0; /* Number of found TRX partitions */ | 
|  | int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, }; | 
|  | int err; | 
|  |  | 
|  | /* | 
|  | * Some really old flashes (like AT45DB*) had smaller erasesize-s, but | 
|  | * partitions were aligned to at least 0x1000 anyway. | 
|  | */ | 
|  | if (blocksize < 0x1000) | 
|  | blocksize = 0x1000; | 
|  |  | 
|  | /* Alloc */ | 
|  | parts = kcalloc(BCM47XXPART_MAX_PARTS, sizeof(struct mtd_partition), | 
|  | GFP_KERNEL); | 
|  | if (!parts) | 
|  | return -ENOMEM; | 
|  |  | 
|  | buf = kzalloc(BCM47XXPART_BYTES_TO_READ, GFP_KERNEL); | 
|  | if (!buf) { | 
|  | kfree(parts); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | /* Parse block by block looking for magics */ | 
|  | for (offset = 0; offset <= master->size - blocksize; | 
|  | offset += blocksize) { | 
|  | /* Nothing more in higher memory on BCM47XX (MIPS) */ | 
|  | if (IS_ENABLED(CONFIG_BCM47XX) && offset >= 0x2000000) | 
|  | break; | 
|  |  | 
|  | if (curr_part >= BCM47XXPART_MAX_PARTS) { | 
|  | pr_warn("Reached maximum number of partitions, scanning stopped!\n"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* Read beginning of the block */ | 
|  | err = mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ, | 
|  | &bytes_read, (uint8_t *)buf); | 
|  | if (err && !mtd_is_bitflip(err)) { | 
|  | pr_err("mtd_read error while parsing (offset: 0x%X): %d\n", | 
|  | offset, err); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* Magic or small NVRAM at 0x400 */ | 
|  | if ((buf[0x4e0 / 4] == CFE_MAGIC && buf[0x4e4 / 4] == CFE_MAGIC) || | 
|  | (buf[0x400 / 4] == NVRAM_HEADER)) { | 
|  | bcm47xxpart_add_part(&parts[curr_part++], "boot", | 
|  | offset, MTD_WRITEABLE); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * board_data starts with board_id which differs across boards, | 
|  | * but we can use 'MPFR' (hopefully) magic at 0x100 | 
|  | */ | 
|  | if (buf[0x100 / 4] == BOARD_DATA_MAGIC) { | 
|  | bcm47xxpart_add_part(&parts[curr_part++], "board_data", | 
|  | offset, MTD_WRITEABLE); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* Found on Huawei E970 */ | 
|  | if (buf[0x000 / 4] == FACTORY_MAGIC) { | 
|  | bcm47xxpart_add_part(&parts[curr_part++], "factory", | 
|  | offset, MTD_WRITEABLE); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* POT(TOP) */ | 
|  | if (buf[0x000 / 4] == POT_MAGIC1 && | 
|  | (buf[0x004 / 4] & 0xFFFF) == POT_MAGIC2) { | 
|  | bcm47xxpart_add_part(&parts[curr_part++], "POT", offset, | 
|  | MTD_WRITEABLE); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* ML */ | 
|  | if (buf[0x010 / 4] == ML_MAGIC1 && | 
|  | buf[0x014 / 4] == ML_MAGIC2) { | 
|  | bcm47xxpart_add_part(&parts[curr_part++], "ML", offset, | 
|  | MTD_WRITEABLE); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* TRX */ | 
|  | if (buf[0x000 / 4] == TRX_MAGIC) { | 
|  | struct trx_header *trx; | 
|  | uint32_t last_subpart; | 
|  | uint32_t trx_size; | 
|  |  | 
|  | if (trx_num >= ARRAY_SIZE(trx_parts)) | 
|  | pr_warn("No enough space to store another TRX found at 0x%X\n", | 
|  | offset); | 
|  | else | 
|  | trx_parts[trx_num++] = curr_part; | 
|  | bcm47xxpart_add_part(&parts[curr_part++], "firmware", | 
|  | offset, 0); | 
|  |  | 
|  | /* | 
|  | * Try to find TRX size. The "length" field isn't fully | 
|  | * reliable as it could be decreased to make CRC32 cover | 
|  | * only part of TRX data. It's commonly used as checksum | 
|  | * can't cover e.g. ever-changing rootfs partition. | 
|  | * Use offsets as helpers for assuming min TRX size. | 
|  | */ | 
|  | trx = (struct trx_header *)buf; | 
|  | last_subpart = max3(trx->offset[0], trx->offset[1], | 
|  | trx->offset[2]); | 
|  | trx_size = max(trx->length, last_subpart + blocksize); | 
|  |  | 
|  | /* | 
|  | * Skip the TRX data. Decrease offset by block size as | 
|  | * the next loop iteration will increase it. | 
|  | */ | 
|  | offset += roundup(trx_size, blocksize) - blocksize; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* Squashfs on devices not using TRX */ | 
|  | if (le32_to_cpu(buf[0x000 / 4]) == SQUASHFS_MAGIC || | 
|  | buf[0x000 / 4] == SHSQ_MAGIC) { | 
|  | bcm47xxpart_add_part(&parts[curr_part++], "rootfs", | 
|  | offset, 0); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * New (ARM?) devices may have NVRAM in some middle block. Last | 
|  | * block will be checked later, so skip it. | 
|  | */ | 
|  | if (offset != master->size - blocksize && | 
|  | buf[0x000 / 4] == NVRAM_HEADER) { | 
|  | bcm47xxpart_add_part(&parts[curr_part++], "nvram", | 
|  | offset, 0); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* Read middle of the block */ | 
|  | err = mtd_read(master, offset + (blocksize / 2), 0x4, &bytes_read, | 
|  | (uint8_t *)buf); | 
|  | if (err && !mtd_is_bitflip(err)) { | 
|  | pr_err("mtd_read error while parsing (offset: 0x%X): %d\n", | 
|  | offset + (blocksize / 2), err); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* Some devices (ex. WNDR3700v3) don't have a standard 'MPFR' */ | 
|  | if (buf[0x000 / 4] == BOARD_DATA_MAGIC2) { | 
|  | bcm47xxpart_add_part(&parts[curr_part++], "board_data", | 
|  | offset, MTD_WRITEABLE); | 
|  | continue; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Look for NVRAM at the end of the last block. */ | 
|  | for (i = 0; i < ARRAY_SIZE(possible_nvram_sizes); i++) { | 
|  | if (curr_part >= BCM47XXPART_MAX_PARTS) { | 
|  | pr_warn("Reached maximum number of partitions, scanning stopped!\n"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | offset = master->size - possible_nvram_sizes[i]; | 
|  | err = mtd_read(master, offset, 0x4, &bytes_read, | 
|  | (uint8_t *)buf); | 
|  | if (err && !mtd_is_bitflip(err)) { | 
|  | pr_err("mtd_read error while reading (offset 0x%X): %d\n", | 
|  | offset, err); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* Standard NVRAM */ | 
|  | if (buf[0] == NVRAM_HEADER) { | 
|  | bcm47xxpart_add_part(&parts[curr_part++], "nvram", | 
|  | master->size - blocksize, 0); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | kfree(buf); | 
|  |  | 
|  | /* | 
|  | * Assume that partitions end at the beginning of the one they are | 
|  | * followed by. | 
|  | */ | 
|  | for (i = 0; i < curr_part; i++) { | 
|  | u64 next_part_offset = (i < curr_part - 1) ? | 
|  | parts[i + 1].offset : master->size; | 
|  |  | 
|  | parts[i].size = next_part_offset - parts[i].offset; | 
|  | } | 
|  |  | 
|  | /* If there was TRX parse it now */ | 
|  | for (i = 0; i < trx_num; i++) { | 
|  | struct mtd_partition *trx = &parts[trx_parts[i]]; | 
|  |  | 
|  | if (i == bcm47xxpart_bootpartition()) | 
|  | trx->types = trx_types; | 
|  | else | 
|  | trx->name = "failsafe"; | 
|  | } | 
|  |  | 
|  | *pparts = parts; | 
|  | return curr_part; | 
|  | }; | 
|  |  | 
|  | static const struct of_device_id bcm47xxpart_of_match_table[] = { | 
|  | { .compatible = "brcm,bcm947xx-cfe-partitions" }, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, bcm47xxpart_of_match_table); | 
|  |  | 
|  | static struct mtd_part_parser bcm47xxpart_mtd_parser = { | 
|  | .parse_fn = bcm47xxpart_parse, | 
|  | .name = "bcm47xxpart", | 
|  | .of_match_table = bcm47xxpart_of_match_table, | 
|  | }; | 
|  | module_mtd_part_parser(bcm47xxpart_mtd_parser); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_DESCRIPTION("MTD partitioning for BCM47XX flash memories"); |