| // SPDX-License-Identifier: GPL-2.0 | 
 | /* | 
 |  * Greybus "AP" USB driver for "ES2" controller chips | 
 |  * | 
 |  * Copyright 2014-2015 Google Inc. | 
 |  * Copyright 2014-2015 Linaro Ltd. | 
 |  */ | 
 | #include <linux/kthread.h> | 
 | #include <linux/sizes.h> | 
 | #include <linux/usb.h> | 
 | #include <linux/kfifo.h> | 
 | #include <linux/debugfs.h> | 
 | #include <linux/list.h> | 
 | #include <linux/greybus.h> | 
 | #include <asm/unaligned.h> | 
 |  | 
 | #include "arpc.h" | 
 | #include "greybus_trace.h" | 
 |  | 
 |  | 
 | /* Default timeout for USB vendor requests. */ | 
 | #define ES2_USB_CTRL_TIMEOUT	500 | 
 |  | 
 | /* Default timeout for ARPC CPort requests */ | 
 | #define ES2_ARPC_CPORT_TIMEOUT	500 | 
 |  | 
 | /* Fixed CPort numbers */ | 
 | #define ES2_CPORT_CDSI0		16 | 
 | #define ES2_CPORT_CDSI1		17 | 
 |  | 
 | /* Memory sizes for the buffers sent to/from the ES2 controller */ | 
 | #define ES2_GBUF_MSG_SIZE_MAX	2048 | 
 |  | 
 | /* Memory sizes for the ARPC buffers */ | 
 | #define ARPC_OUT_SIZE_MAX	U16_MAX | 
 | #define ARPC_IN_SIZE_MAX	128 | 
 |  | 
 | static const struct usb_device_id id_table[] = { | 
 | 	{ USB_DEVICE(0x18d1, 0x1eaf) }, | 
 | 	{ }, | 
 | }; | 
 | MODULE_DEVICE_TABLE(usb, id_table); | 
 |  | 
 | #define APB1_LOG_SIZE		SZ_16K | 
 |  | 
 | /* | 
 |  * Number of CPort IN urbs in flight at any point in time. | 
 |  * Adjust if we are having stalls in the USB buffer due to not enough urbs in | 
 |  * flight. | 
 |  */ | 
 | #define NUM_CPORT_IN_URB	4 | 
 |  | 
 | /* Number of CPort OUT urbs in flight at any point in time. | 
 |  * Adjust if we get messages saying we are out of urbs in the system log. | 
 |  */ | 
 | #define NUM_CPORT_OUT_URB	8 | 
 |  | 
 | /* | 
 |  * Number of ARPC in urbs in flight at any point in time. | 
 |  */ | 
 | #define NUM_ARPC_IN_URB		2 | 
 |  | 
 | /* | 
 |  * @endpoint: bulk in endpoint for CPort data | 
 |  * @urb: array of urbs for the CPort in messages | 
 |  * @buffer: array of buffers for the @cport_in_urb urbs | 
 |  */ | 
 | struct es2_cport_in { | 
 | 	__u8 endpoint; | 
 | 	struct urb *urb[NUM_CPORT_IN_URB]; | 
 | 	u8 *buffer[NUM_CPORT_IN_URB]; | 
 | }; | 
 |  | 
 | /** | 
 |  * struct es2_ap_dev - ES2 USB Bridge to AP structure | 
 |  * @usb_dev: pointer to the USB device we are. | 
 |  * @usb_intf: pointer to the USB interface we are bound to. | 
 |  * @hd: pointer to our gb_host_device structure | 
 |  * | 
 |  * @cport_in: endpoint, urbs and buffer for cport in messages | 
 |  * @cport_out_endpoint: endpoint for for cport out messages | 
 |  * @cport_out_urb: array of urbs for the CPort out messages | 
 |  * @cport_out_urb_busy: array of flags to see if the @cport_out_urb is busy or | 
 |  *			not. | 
 |  * @cport_out_urb_cancelled: array of flags indicating whether the | 
 |  *			corresponding @cport_out_urb is being cancelled | 
 |  * @cport_out_urb_lock: locks the @cport_out_urb_busy "list" | 
 |  * @cdsi1_in_use: true if cport CDSI1 is in use | 
 |  * @apb_log_task: task pointer for logging thread | 
 |  * @apb_log_dentry: file system entry for the log file interface | 
 |  * @apb_log_enable_dentry: file system entry for enabling logging | 
 |  * @apb_log_fifo: kernel FIFO to carry logged data | 
 |  * @arpc_urb: array of urbs for the ARPC in messages | 
 |  * @arpc_buffer: array of buffers for the @arpc_urb urbs | 
 |  * @arpc_endpoint_in: bulk in endpoint for APBridgeA RPC | 
 |  * @arpc_id_cycle: gives an unique id to ARPC | 
 |  * @arpc_lock: locks ARPC list | 
 |  * @arpcs: list of in progress ARPCs | 
 |  */ | 
 | struct es2_ap_dev { | 
 | 	struct usb_device *usb_dev; | 
 | 	struct usb_interface *usb_intf; | 
 | 	struct gb_host_device *hd; | 
 |  | 
 | 	struct es2_cport_in cport_in; | 
 | 	__u8 cport_out_endpoint; | 
 | 	struct urb *cport_out_urb[NUM_CPORT_OUT_URB]; | 
 | 	bool cport_out_urb_busy[NUM_CPORT_OUT_URB]; | 
 | 	bool cport_out_urb_cancelled[NUM_CPORT_OUT_URB]; | 
 | 	spinlock_t cport_out_urb_lock; | 
 |  | 
 | 	bool cdsi1_in_use; | 
 |  | 
 | 	struct task_struct *apb_log_task; | 
 | 	struct dentry *apb_log_dentry; | 
 | 	struct dentry *apb_log_enable_dentry; | 
 | 	DECLARE_KFIFO(apb_log_fifo, char, APB1_LOG_SIZE); | 
 |  | 
 | 	__u8 arpc_endpoint_in; | 
 | 	struct urb *arpc_urb[NUM_ARPC_IN_URB]; | 
 | 	u8 *arpc_buffer[NUM_ARPC_IN_URB]; | 
 |  | 
 | 	int arpc_id_cycle; | 
 | 	spinlock_t arpc_lock; | 
 | 	struct list_head arpcs; | 
 | }; | 
 |  | 
 | struct arpc { | 
 | 	struct list_head list; | 
 | 	struct arpc_request_message *req; | 
 | 	struct arpc_response_message *resp; | 
 | 	struct completion response_received; | 
 | 	bool active; | 
 | }; | 
 |  | 
 | static inline struct es2_ap_dev *hd_to_es2(struct gb_host_device *hd) | 
 | { | 
 | 	return (struct es2_ap_dev *)&hd->hd_priv; | 
 | } | 
 |  | 
 | static void cport_out_callback(struct urb *urb); | 
 | static void usb_log_enable(struct es2_ap_dev *es2); | 
 | static void usb_log_disable(struct es2_ap_dev *es2); | 
 | static int arpc_sync(struct es2_ap_dev *es2, u8 type, void *payload, | 
 | 		     size_t size, int *result, unsigned int timeout); | 
 |  | 
 | static int output_sync(struct es2_ap_dev *es2, void *req, u16 size, u8 cmd) | 
 | { | 
 | 	struct usb_device *udev = es2->usb_dev; | 
 | 	u8 *data; | 
 | 	int retval; | 
 |  | 
 | 	data = kmemdup(req, size, GFP_KERNEL); | 
 | 	if (!data) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), | 
 | 				 cmd, | 
 | 				 USB_DIR_OUT | USB_TYPE_VENDOR | | 
 | 				 USB_RECIP_INTERFACE, | 
 | 				 0, 0, data, size, ES2_USB_CTRL_TIMEOUT); | 
 | 	if (retval < 0) | 
 | 		dev_err(&udev->dev, "%s: return error %d\n", __func__, retval); | 
 | 	else | 
 | 		retval = 0; | 
 |  | 
 | 	kfree(data); | 
 | 	return retval; | 
 | } | 
 |  | 
 | static void ap_urb_complete(struct urb *urb) | 
 | { | 
 | 	struct usb_ctrlrequest *dr = urb->context; | 
 |  | 
 | 	kfree(dr); | 
 | 	usb_free_urb(urb); | 
 | } | 
 |  | 
 | static int output_async(struct es2_ap_dev *es2, void *req, u16 size, u8 cmd) | 
 | { | 
 | 	struct usb_device *udev = es2->usb_dev; | 
 | 	struct urb *urb; | 
 | 	struct usb_ctrlrequest *dr; | 
 | 	u8 *buf; | 
 | 	int retval; | 
 |  | 
 | 	urb = usb_alloc_urb(0, GFP_ATOMIC); | 
 | 	if (!urb) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	dr = kmalloc(sizeof(*dr) + size, GFP_ATOMIC); | 
 | 	if (!dr) { | 
 | 		usb_free_urb(urb); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	buf = (u8 *)dr + sizeof(*dr); | 
 | 	memcpy(buf, req, size); | 
 |  | 
 | 	dr->bRequest = cmd; | 
 | 	dr->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE; | 
 | 	dr->wValue = 0; | 
 | 	dr->wIndex = 0; | 
 | 	dr->wLength = cpu_to_le16(size); | 
 |  | 
 | 	usb_fill_control_urb(urb, udev, usb_sndctrlpipe(udev, 0), | 
 | 			     (unsigned char *)dr, buf, size, | 
 | 			     ap_urb_complete, dr); | 
 | 	retval = usb_submit_urb(urb, GFP_ATOMIC); | 
 | 	if (retval) { | 
 | 		usb_free_urb(urb); | 
 | 		kfree(dr); | 
 | 	} | 
 | 	return retval; | 
 | } | 
 |  | 
 | static int output(struct gb_host_device *hd, void *req, u16 size, u8 cmd, | 
 | 		  bool async) | 
 | { | 
 | 	struct es2_ap_dev *es2 = hd_to_es2(hd); | 
 |  | 
 | 	if (async) | 
 | 		return output_async(es2, req, size, cmd); | 
 |  | 
 | 	return output_sync(es2, req, size, cmd); | 
 | } | 
 |  | 
 | static int es2_cport_in_enable(struct es2_ap_dev *es2, | 
 | 			       struct es2_cport_in *cport_in) | 
 | { | 
 | 	struct urb *urb; | 
 | 	int ret; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < NUM_CPORT_IN_URB; ++i) { | 
 | 		urb = cport_in->urb[i]; | 
 |  | 
 | 		ret = usb_submit_urb(urb, GFP_KERNEL); | 
 | 		if (ret) { | 
 | 			dev_err(&es2->usb_dev->dev, | 
 | 				"failed to submit in-urb: %d\n", ret); | 
 | 			goto err_kill_urbs; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_kill_urbs: | 
 | 	for (--i; i >= 0; --i) { | 
 | 		urb = cport_in->urb[i]; | 
 | 		usb_kill_urb(urb); | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void es2_cport_in_disable(struct es2_ap_dev *es2, | 
 | 				 struct es2_cport_in *cport_in) | 
 | { | 
 | 	struct urb *urb; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < NUM_CPORT_IN_URB; ++i) { | 
 | 		urb = cport_in->urb[i]; | 
 | 		usb_kill_urb(urb); | 
 | 	} | 
 | } | 
 |  | 
 | static int es2_arpc_in_enable(struct es2_ap_dev *es2) | 
 | { | 
 | 	struct urb *urb; | 
 | 	int ret; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < NUM_ARPC_IN_URB; ++i) { | 
 | 		urb = es2->arpc_urb[i]; | 
 |  | 
 | 		ret = usb_submit_urb(urb, GFP_KERNEL); | 
 | 		if (ret) { | 
 | 			dev_err(&es2->usb_dev->dev, | 
 | 				"failed to submit arpc in-urb: %d\n", ret); | 
 | 			goto err_kill_urbs; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_kill_urbs: | 
 | 	for (--i; i >= 0; --i) { | 
 | 		urb = es2->arpc_urb[i]; | 
 | 		usb_kill_urb(urb); | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void es2_arpc_in_disable(struct es2_ap_dev *es2) | 
 | { | 
 | 	struct urb *urb; | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < NUM_ARPC_IN_URB; ++i) { | 
 | 		urb = es2->arpc_urb[i]; | 
 | 		usb_kill_urb(urb); | 
 | 	} | 
 | } | 
 |  | 
 | static struct urb *next_free_urb(struct es2_ap_dev *es2, gfp_t gfp_mask) | 
 | { | 
 | 	struct urb *urb = NULL; | 
 | 	unsigned long flags; | 
 | 	int i; | 
 |  | 
 | 	spin_lock_irqsave(&es2->cport_out_urb_lock, flags); | 
 |  | 
 | 	/* Look in our pool of allocated urbs first, as that's the "fastest" */ | 
 | 	for (i = 0; i < NUM_CPORT_OUT_URB; ++i) { | 
 | 		if (!es2->cport_out_urb_busy[i] && | 
 | 		    !es2->cport_out_urb_cancelled[i]) { | 
 | 			es2->cport_out_urb_busy[i] = true; | 
 | 			urb = es2->cport_out_urb[i]; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | 	spin_unlock_irqrestore(&es2->cport_out_urb_lock, flags); | 
 | 	if (urb) | 
 | 		return urb; | 
 |  | 
 | 	/* | 
 | 	 * Crap, pool is empty, complain to the syslog and go allocate one | 
 | 	 * dynamically as we have to succeed. | 
 | 	 */ | 
 | 	dev_dbg(&es2->usb_dev->dev, | 
 | 		"No free CPort OUT urbs, having to dynamically allocate one!\n"); | 
 | 	return usb_alloc_urb(0, gfp_mask); | 
 | } | 
 |  | 
 | static void free_urb(struct es2_ap_dev *es2, struct urb *urb) | 
 | { | 
 | 	unsigned long flags; | 
 | 	int i; | 
 | 	/* | 
 | 	 * See if this was an urb in our pool, if so mark it "free", otherwise | 
 | 	 * we need to free it ourselves. | 
 | 	 */ | 
 | 	spin_lock_irqsave(&es2->cport_out_urb_lock, flags); | 
 | 	for (i = 0; i < NUM_CPORT_OUT_URB; ++i) { | 
 | 		if (urb == es2->cport_out_urb[i]) { | 
 | 			es2->cport_out_urb_busy[i] = false; | 
 | 			urb = NULL; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | 	spin_unlock_irqrestore(&es2->cport_out_urb_lock, flags); | 
 |  | 
 | 	/* If urb is not NULL, then we need to free this urb */ | 
 | 	usb_free_urb(urb); | 
 | } | 
 |  | 
 | /* | 
 |  * We (ab)use the operation-message header pad bytes to transfer the | 
 |  * cport id in order to minimise overhead. | 
 |  */ | 
 | static void | 
 | gb_message_cport_pack(struct gb_operation_msg_hdr *header, u16 cport_id) | 
 | { | 
 | 	header->pad[0] = cport_id; | 
 | } | 
 |  | 
 | /* Clear the pad bytes used for the CPort id */ | 
 | static void gb_message_cport_clear(struct gb_operation_msg_hdr *header) | 
 | { | 
 | 	header->pad[0] = 0; | 
 | } | 
 |  | 
 | /* Extract the CPort id packed into the header, and clear it */ | 
 | static u16 gb_message_cport_unpack(struct gb_operation_msg_hdr *header) | 
 | { | 
 | 	u16 cport_id = header->pad[0]; | 
 |  | 
 | 	gb_message_cport_clear(header); | 
 |  | 
 | 	return cport_id; | 
 | } | 
 |  | 
 | /* | 
 |  * Returns zero if the message was successfully queued, or a negative errno | 
 |  * otherwise. | 
 |  */ | 
 | static int message_send(struct gb_host_device *hd, u16 cport_id, | 
 | 			struct gb_message *message, gfp_t gfp_mask) | 
 | { | 
 | 	struct es2_ap_dev *es2 = hd_to_es2(hd); | 
 | 	struct usb_device *udev = es2->usb_dev; | 
 | 	size_t buffer_size; | 
 | 	int retval; | 
 | 	struct urb *urb; | 
 | 	unsigned long flags; | 
 |  | 
 | 	/* | 
 | 	 * The data actually transferred will include an indication | 
 | 	 * of where the data should be sent.  Do one last check of | 
 | 	 * the target CPort id before filling it in. | 
 | 	 */ | 
 | 	if (!cport_id_valid(hd, cport_id)) { | 
 | 		dev_err(&udev->dev, "invalid cport %u\n", cport_id); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	/* Find a free urb */ | 
 | 	urb = next_free_urb(es2, gfp_mask); | 
 | 	if (!urb) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	spin_lock_irqsave(&es2->cport_out_urb_lock, flags); | 
 | 	message->hcpriv = urb; | 
 | 	spin_unlock_irqrestore(&es2->cport_out_urb_lock, flags); | 
 |  | 
 | 	/* Pack the cport id into the message header */ | 
 | 	gb_message_cport_pack(message->header, cport_id); | 
 |  | 
 | 	buffer_size = sizeof(*message->header) + message->payload_size; | 
 |  | 
 | 	usb_fill_bulk_urb(urb, udev, | 
 | 			  usb_sndbulkpipe(udev, | 
 | 					  es2->cport_out_endpoint), | 
 | 			  message->buffer, buffer_size, | 
 | 			  cport_out_callback, message); | 
 | 	urb->transfer_flags |= URB_ZERO_PACKET; | 
 |  | 
 | 	trace_gb_message_submit(message); | 
 |  | 
 | 	retval = usb_submit_urb(urb, gfp_mask); | 
 | 	if (retval) { | 
 | 		dev_err(&udev->dev, "failed to submit out-urb: %d\n", retval); | 
 |  | 
 | 		spin_lock_irqsave(&es2->cport_out_urb_lock, flags); | 
 | 		message->hcpriv = NULL; | 
 | 		spin_unlock_irqrestore(&es2->cport_out_urb_lock, flags); | 
 |  | 
 | 		free_urb(es2, urb); | 
 | 		gb_message_cport_clear(message->header); | 
 |  | 
 | 		return retval; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Can not be called in atomic context. | 
 |  */ | 
 | static void message_cancel(struct gb_message *message) | 
 | { | 
 | 	struct gb_host_device *hd = message->operation->connection->hd; | 
 | 	struct es2_ap_dev *es2 = hd_to_es2(hd); | 
 | 	struct urb *urb; | 
 | 	int i; | 
 |  | 
 | 	might_sleep(); | 
 |  | 
 | 	spin_lock_irq(&es2->cport_out_urb_lock); | 
 | 	urb = message->hcpriv; | 
 |  | 
 | 	/* Prevent dynamically allocated urb from being deallocated. */ | 
 | 	usb_get_urb(urb); | 
 |  | 
 | 	/* Prevent pre-allocated urb from being reused. */ | 
 | 	for (i = 0; i < NUM_CPORT_OUT_URB; ++i) { | 
 | 		if (urb == es2->cport_out_urb[i]) { | 
 | 			es2->cport_out_urb_cancelled[i] = true; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 | 	spin_unlock_irq(&es2->cport_out_urb_lock); | 
 |  | 
 | 	usb_kill_urb(urb); | 
 |  | 
 | 	if (i < NUM_CPORT_OUT_URB) { | 
 | 		spin_lock_irq(&es2->cport_out_urb_lock); | 
 | 		es2->cport_out_urb_cancelled[i] = false; | 
 | 		spin_unlock_irq(&es2->cport_out_urb_lock); | 
 | 	} | 
 |  | 
 | 	usb_free_urb(urb); | 
 | } | 
 |  | 
 | static int es2_cport_allocate(struct gb_host_device *hd, int cport_id, | 
 | 			      unsigned long flags) | 
 | { | 
 | 	struct es2_ap_dev *es2 = hd_to_es2(hd); | 
 | 	struct ida *id_map = &hd->cport_id_map; | 
 | 	int ida_start, ida_end; | 
 |  | 
 | 	switch (cport_id) { | 
 | 	case ES2_CPORT_CDSI0: | 
 | 	case ES2_CPORT_CDSI1: | 
 | 		dev_err(&hd->dev, "cport %d not available\n", cport_id); | 
 | 		return -EBUSY; | 
 | 	} | 
 |  | 
 | 	if (flags & GB_CONNECTION_FLAG_OFFLOADED && | 
 | 	    flags & GB_CONNECTION_FLAG_CDSI1) { | 
 | 		if (es2->cdsi1_in_use) { | 
 | 			dev_err(&hd->dev, "CDSI1 already in use\n"); | 
 | 			return -EBUSY; | 
 | 		} | 
 |  | 
 | 		es2->cdsi1_in_use = true; | 
 |  | 
 | 		return ES2_CPORT_CDSI1; | 
 | 	} | 
 |  | 
 | 	if (cport_id < 0) { | 
 | 		ida_start = 0; | 
 | 		ida_end = hd->num_cports; | 
 | 	} else if (cport_id < hd->num_cports) { | 
 | 		ida_start = cport_id; | 
 | 		ida_end = cport_id + 1; | 
 | 	} else { | 
 | 		dev_err(&hd->dev, "cport %d not available\n", cport_id); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return ida_simple_get(id_map, ida_start, ida_end, GFP_KERNEL); | 
 | } | 
 |  | 
 | static void es2_cport_release(struct gb_host_device *hd, u16 cport_id) | 
 | { | 
 | 	struct es2_ap_dev *es2 = hd_to_es2(hd); | 
 |  | 
 | 	switch (cport_id) { | 
 | 	case ES2_CPORT_CDSI1: | 
 | 		es2->cdsi1_in_use = false; | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	ida_simple_remove(&hd->cport_id_map, cport_id); | 
 | } | 
 |  | 
 | static int cport_enable(struct gb_host_device *hd, u16 cport_id, | 
 | 			unsigned long flags) | 
 | { | 
 | 	struct es2_ap_dev *es2 = hd_to_es2(hd); | 
 | 	struct usb_device *udev = es2->usb_dev; | 
 | 	struct gb_apb_request_cport_flags *req; | 
 | 	u32 connection_flags; | 
 | 	int ret; | 
 |  | 
 | 	req = kzalloc(sizeof(*req), GFP_KERNEL); | 
 | 	if (!req) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	connection_flags = 0; | 
 | 	if (flags & GB_CONNECTION_FLAG_CONTROL) | 
 | 		connection_flags |= GB_APB_CPORT_FLAG_CONTROL; | 
 | 	if (flags & GB_CONNECTION_FLAG_HIGH_PRIO) | 
 | 		connection_flags |= GB_APB_CPORT_FLAG_HIGH_PRIO; | 
 |  | 
 | 	req->flags = cpu_to_le32(connection_flags); | 
 |  | 
 | 	dev_dbg(&hd->dev, "%s - cport = %u, flags = %02x\n", __func__, | 
 | 		cport_id, connection_flags); | 
 |  | 
 | 	ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), | 
 | 			      GB_APB_REQUEST_CPORT_FLAGS, | 
 | 			      USB_DIR_OUT | USB_TYPE_VENDOR | | 
 | 			      USB_RECIP_INTERFACE, cport_id, 0, | 
 | 			      req, sizeof(*req), ES2_USB_CTRL_TIMEOUT); | 
 | 	if (ret < 0) { | 
 | 		dev_err(&udev->dev, "failed to set cport flags for port %d\n", | 
 | 			cport_id); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	ret = 0; | 
 | out: | 
 | 	kfree(req); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int es2_cport_connected(struct gb_host_device *hd, u16 cport_id) | 
 | { | 
 | 	struct es2_ap_dev *es2 = hd_to_es2(hd); | 
 | 	struct device *dev = &es2->usb_dev->dev; | 
 | 	struct arpc_cport_connected_req req; | 
 | 	int ret; | 
 |  | 
 | 	req.cport_id = cpu_to_le16(cport_id); | 
 | 	ret = arpc_sync(es2, ARPC_TYPE_CPORT_CONNECTED, &req, sizeof(req), | 
 | 			NULL, ES2_ARPC_CPORT_TIMEOUT); | 
 | 	if (ret) { | 
 | 		dev_err(dev, "failed to set connected state for cport %u: %d\n", | 
 | 			cport_id, ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int es2_cport_flush(struct gb_host_device *hd, u16 cport_id) | 
 | { | 
 | 	struct es2_ap_dev *es2 = hd_to_es2(hd); | 
 | 	struct device *dev = &es2->usb_dev->dev; | 
 | 	struct arpc_cport_flush_req req; | 
 | 	int ret; | 
 |  | 
 | 	req.cport_id = cpu_to_le16(cport_id); | 
 | 	ret = arpc_sync(es2, ARPC_TYPE_CPORT_FLUSH, &req, sizeof(req), | 
 | 			NULL, ES2_ARPC_CPORT_TIMEOUT); | 
 | 	if (ret) { | 
 | 		dev_err(dev, "failed to flush cport %u: %d\n", cport_id, ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int es2_cport_shutdown(struct gb_host_device *hd, u16 cport_id, | 
 | 			      u8 phase, unsigned int timeout) | 
 | { | 
 | 	struct es2_ap_dev *es2 = hd_to_es2(hd); | 
 | 	struct device *dev = &es2->usb_dev->dev; | 
 | 	struct arpc_cport_shutdown_req req; | 
 | 	int result; | 
 | 	int ret; | 
 |  | 
 | 	if (timeout > U16_MAX) | 
 | 		return -EINVAL; | 
 |  | 
 | 	req.cport_id = cpu_to_le16(cport_id); | 
 | 	req.timeout = cpu_to_le16(timeout); | 
 | 	req.phase = phase; | 
 | 	ret = arpc_sync(es2, ARPC_TYPE_CPORT_SHUTDOWN, &req, sizeof(req), | 
 | 			&result, ES2_ARPC_CPORT_TIMEOUT + timeout); | 
 | 	if (ret) { | 
 | 		dev_err(dev, "failed to send shutdown over cport %u: %d (%d)\n", | 
 | 			cport_id, ret, result); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int es2_cport_quiesce(struct gb_host_device *hd, u16 cport_id, | 
 | 			     size_t peer_space, unsigned int timeout) | 
 | { | 
 | 	struct es2_ap_dev *es2 = hd_to_es2(hd); | 
 | 	struct device *dev = &es2->usb_dev->dev; | 
 | 	struct arpc_cport_quiesce_req req; | 
 | 	int result; | 
 | 	int ret; | 
 |  | 
 | 	if (peer_space > U16_MAX) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (timeout > U16_MAX) | 
 | 		return -EINVAL; | 
 |  | 
 | 	req.cport_id = cpu_to_le16(cport_id); | 
 | 	req.peer_space = cpu_to_le16(peer_space); | 
 | 	req.timeout = cpu_to_le16(timeout); | 
 | 	ret = arpc_sync(es2, ARPC_TYPE_CPORT_QUIESCE, &req, sizeof(req), | 
 | 			&result, ES2_ARPC_CPORT_TIMEOUT + timeout); | 
 | 	if (ret) { | 
 | 		dev_err(dev, "failed to quiesce cport %u: %d (%d)\n", | 
 | 			cport_id, ret, result); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int es2_cport_clear(struct gb_host_device *hd, u16 cport_id) | 
 | { | 
 | 	struct es2_ap_dev *es2 = hd_to_es2(hd); | 
 | 	struct device *dev = &es2->usb_dev->dev; | 
 | 	struct arpc_cport_clear_req req; | 
 | 	int ret; | 
 |  | 
 | 	req.cport_id = cpu_to_le16(cport_id); | 
 | 	ret = arpc_sync(es2, ARPC_TYPE_CPORT_CLEAR, &req, sizeof(req), | 
 | 			NULL, ES2_ARPC_CPORT_TIMEOUT); | 
 | 	if (ret) { | 
 | 		dev_err(dev, "failed to clear cport %u: %d\n", cport_id, ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int latency_tag_enable(struct gb_host_device *hd, u16 cport_id) | 
 | { | 
 | 	int retval; | 
 | 	struct es2_ap_dev *es2 = hd_to_es2(hd); | 
 | 	struct usb_device *udev = es2->usb_dev; | 
 |  | 
 | 	retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), | 
 | 				 GB_APB_REQUEST_LATENCY_TAG_EN, | 
 | 				 USB_DIR_OUT | USB_TYPE_VENDOR | | 
 | 				 USB_RECIP_INTERFACE, cport_id, 0, NULL, | 
 | 				 0, ES2_USB_CTRL_TIMEOUT); | 
 |  | 
 | 	if (retval < 0) | 
 | 		dev_err(&udev->dev, "Cannot enable latency tag for cport %d\n", | 
 | 			cport_id); | 
 | 	return retval; | 
 | } | 
 |  | 
 | static int latency_tag_disable(struct gb_host_device *hd, u16 cport_id) | 
 | { | 
 | 	int retval; | 
 | 	struct es2_ap_dev *es2 = hd_to_es2(hd); | 
 | 	struct usb_device *udev = es2->usb_dev; | 
 |  | 
 | 	retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), | 
 | 				 GB_APB_REQUEST_LATENCY_TAG_DIS, | 
 | 				 USB_DIR_OUT | USB_TYPE_VENDOR | | 
 | 				 USB_RECIP_INTERFACE, cport_id, 0, NULL, | 
 | 				 0, ES2_USB_CTRL_TIMEOUT); | 
 |  | 
 | 	if (retval < 0) | 
 | 		dev_err(&udev->dev, "Cannot disable latency tag for cport %d\n", | 
 | 			cport_id); | 
 | 	return retval; | 
 | } | 
 |  | 
 | static struct gb_hd_driver es2_driver = { | 
 | 	.hd_priv_size			= sizeof(struct es2_ap_dev), | 
 | 	.message_send			= message_send, | 
 | 	.message_cancel			= message_cancel, | 
 | 	.cport_allocate			= es2_cport_allocate, | 
 | 	.cport_release			= es2_cport_release, | 
 | 	.cport_enable			= cport_enable, | 
 | 	.cport_connected		= es2_cport_connected, | 
 | 	.cport_flush			= es2_cport_flush, | 
 | 	.cport_shutdown			= es2_cport_shutdown, | 
 | 	.cport_quiesce			= es2_cport_quiesce, | 
 | 	.cport_clear			= es2_cport_clear, | 
 | 	.latency_tag_enable		= latency_tag_enable, | 
 | 	.latency_tag_disable		= latency_tag_disable, | 
 | 	.output				= output, | 
 | }; | 
 |  | 
 | /* Common function to report consistent warnings based on URB status */ | 
 | static int check_urb_status(struct urb *urb) | 
 | { | 
 | 	struct device *dev = &urb->dev->dev; | 
 | 	int status = urb->status; | 
 |  | 
 | 	switch (status) { | 
 | 	case 0: | 
 | 		return 0; | 
 |  | 
 | 	case -EOVERFLOW: | 
 | 		dev_err(dev, "%s: overflow actual length is %d\n", | 
 | 			__func__, urb->actual_length); | 
 | 		fallthrough; | 
 | 	case -ECONNRESET: | 
 | 	case -ENOENT: | 
 | 	case -ESHUTDOWN: | 
 | 	case -EILSEQ: | 
 | 	case -EPROTO: | 
 | 		/* device is gone, stop sending */ | 
 | 		return status; | 
 | 	} | 
 | 	dev_err(dev, "%s: unknown status %d\n", __func__, status); | 
 |  | 
 | 	return -EAGAIN; | 
 | } | 
 |  | 
 | static void es2_destroy(struct es2_ap_dev *es2) | 
 | { | 
 | 	struct usb_device *udev; | 
 | 	struct urb *urb; | 
 | 	int i; | 
 |  | 
 | 	debugfs_remove(es2->apb_log_enable_dentry); | 
 | 	usb_log_disable(es2); | 
 |  | 
 | 	/* Tear down everything! */ | 
 | 	for (i = 0; i < NUM_CPORT_OUT_URB; ++i) { | 
 | 		urb = es2->cport_out_urb[i]; | 
 | 		usb_kill_urb(urb); | 
 | 		usb_free_urb(urb); | 
 | 		es2->cport_out_urb[i] = NULL; | 
 | 		es2->cport_out_urb_busy[i] = false;	/* just to be anal */ | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < NUM_ARPC_IN_URB; ++i) { | 
 | 		usb_free_urb(es2->arpc_urb[i]); | 
 | 		kfree(es2->arpc_buffer[i]); | 
 | 		es2->arpc_buffer[i] = NULL; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < NUM_CPORT_IN_URB; ++i) { | 
 | 		usb_free_urb(es2->cport_in.urb[i]); | 
 | 		kfree(es2->cport_in.buffer[i]); | 
 | 		es2->cport_in.buffer[i] = NULL; | 
 | 	} | 
 |  | 
 | 	/* release reserved CDSI0 and CDSI1 cports */ | 
 | 	gb_hd_cport_release_reserved(es2->hd, ES2_CPORT_CDSI1); | 
 | 	gb_hd_cport_release_reserved(es2->hd, ES2_CPORT_CDSI0); | 
 |  | 
 | 	udev = es2->usb_dev; | 
 | 	gb_hd_put(es2->hd); | 
 |  | 
 | 	usb_put_dev(udev); | 
 | } | 
 |  | 
 | static void cport_in_callback(struct urb *urb) | 
 | { | 
 | 	struct gb_host_device *hd = urb->context; | 
 | 	struct device *dev = &urb->dev->dev; | 
 | 	struct gb_operation_msg_hdr *header; | 
 | 	int status = check_urb_status(urb); | 
 | 	int retval; | 
 | 	u16 cport_id; | 
 |  | 
 | 	if (status) { | 
 | 		if ((status == -EAGAIN) || (status == -EPROTO)) | 
 | 			goto exit; | 
 |  | 
 | 		/* The urb is being unlinked */ | 
 | 		if (status == -ENOENT || status == -ESHUTDOWN) | 
 | 			return; | 
 |  | 
 | 		dev_err(dev, "urb cport in error %d (dropped)\n", status); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (urb->actual_length < sizeof(*header)) { | 
 | 		dev_err(dev, "short message received\n"); | 
 | 		goto exit; | 
 | 	} | 
 |  | 
 | 	/* Extract the CPort id, which is packed in the message header */ | 
 | 	header = urb->transfer_buffer; | 
 | 	cport_id = gb_message_cport_unpack(header); | 
 |  | 
 | 	if (cport_id_valid(hd, cport_id)) { | 
 | 		greybus_data_rcvd(hd, cport_id, urb->transfer_buffer, | 
 | 				  urb->actual_length); | 
 | 	} else { | 
 | 		dev_err(dev, "invalid cport id %u received\n", cport_id); | 
 | 	} | 
 | exit: | 
 | 	/* put our urb back in the request pool */ | 
 | 	retval = usb_submit_urb(urb, GFP_ATOMIC); | 
 | 	if (retval) | 
 | 		dev_err(dev, "failed to resubmit in-urb: %d\n", retval); | 
 | } | 
 |  | 
 | static void cport_out_callback(struct urb *urb) | 
 | { | 
 | 	struct gb_message *message = urb->context; | 
 | 	struct gb_host_device *hd = message->operation->connection->hd; | 
 | 	struct es2_ap_dev *es2 = hd_to_es2(hd); | 
 | 	int status = check_urb_status(urb); | 
 | 	unsigned long flags; | 
 |  | 
 | 	gb_message_cport_clear(message->header); | 
 |  | 
 | 	spin_lock_irqsave(&es2->cport_out_urb_lock, flags); | 
 | 	message->hcpriv = NULL; | 
 | 	spin_unlock_irqrestore(&es2->cport_out_urb_lock, flags); | 
 |  | 
 | 	/* | 
 | 	 * Tell the submitter that the message send (attempt) is | 
 | 	 * complete, and report the status. | 
 | 	 */ | 
 | 	greybus_message_sent(hd, message, status); | 
 |  | 
 | 	free_urb(es2, urb); | 
 | } | 
 |  | 
 | static struct arpc *arpc_alloc(void *payload, u16 size, u8 type) | 
 | { | 
 | 	struct arpc *rpc; | 
 |  | 
 | 	if (size + sizeof(*rpc->req) > ARPC_OUT_SIZE_MAX) | 
 | 		return NULL; | 
 |  | 
 | 	rpc = kzalloc(sizeof(*rpc), GFP_KERNEL); | 
 | 	if (!rpc) | 
 | 		return NULL; | 
 |  | 
 | 	INIT_LIST_HEAD(&rpc->list); | 
 | 	rpc->req = kzalloc(sizeof(*rpc->req) + size, GFP_KERNEL); | 
 | 	if (!rpc->req) | 
 | 		goto err_free_rpc; | 
 |  | 
 | 	rpc->resp = kzalloc(sizeof(*rpc->resp), GFP_KERNEL); | 
 | 	if (!rpc->resp) | 
 | 		goto err_free_req; | 
 |  | 
 | 	rpc->req->type = type; | 
 | 	rpc->req->size = cpu_to_le16(sizeof(*rpc->req) + size); | 
 | 	memcpy(rpc->req->data, payload, size); | 
 |  | 
 | 	init_completion(&rpc->response_received); | 
 |  | 
 | 	return rpc; | 
 |  | 
 | err_free_req: | 
 | 	kfree(rpc->req); | 
 | err_free_rpc: | 
 | 	kfree(rpc); | 
 |  | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static void arpc_free(struct arpc *rpc) | 
 | { | 
 | 	kfree(rpc->req); | 
 | 	kfree(rpc->resp); | 
 | 	kfree(rpc); | 
 | } | 
 |  | 
 | static struct arpc *arpc_find(struct es2_ap_dev *es2, __le16 id) | 
 | { | 
 | 	struct arpc *rpc; | 
 |  | 
 | 	list_for_each_entry(rpc, &es2->arpcs, list) { | 
 | 		if (rpc->req->id == id) | 
 | 			return rpc; | 
 | 	} | 
 |  | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static void arpc_add(struct es2_ap_dev *es2, struct arpc *rpc) | 
 | { | 
 | 	rpc->active = true; | 
 | 	rpc->req->id = cpu_to_le16(es2->arpc_id_cycle++); | 
 | 	list_add_tail(&rpc->list, &es2->arpcs); | 
 | } | 
 |  | 
 | static void arpc_del(struct es2_ap_dev *es2, struct arpc *rpc) | 
 | { | 
 | 	if (rpc->active) { | 
 | 		rpc->active = false; | 
 | 		list_del(&rpc->list); | 
 | 	} | 
 | } | 
 |  | 
 | static int arpc_send(struct es2_ap_dev *es2, struct arpc *rpc, int timeout) | 
 | { | 
 | 	struct usb_device *udev = es2->usb_dev; | 
 | 	int retval; | 
 |  | 
 | 	retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), | 
 | 				 GB_APB_REQUEST_ARPC_RUN, | 
 | 				 USB_DIR_OUT | USB_TYPE_VENDOR | | 
 | 				 USB_RECIP_INTERFACE, | 
 | 				 0, 0, | 
 | 				 rpc->req, le16_to_cpu(rpc->req->size), | 
 | 				 ES2_USB_CTRL_TIMEOUT); | 
 | 	if (retval < 0) { | 
 | 		dev_err(&udev->dev, | 
 | 			"failed to send ARPC request %d: %d\n", | 
 | 			rpc->req->type, retval); | 
 | 		return retval; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int arpc_sync(struct es2_ap_dev *es2, u8 type, void *payload, | 
 | 		     size_t size, int *result, unsigned int timeout) | 
 | { | 
 | 	struct arpc *rpc; | 
 | 	unsigned long flags; | 
 | 	int retval; | 
 |  | 
 | 	if (result) | 
 | 		*result = 0; | 
 |  | 
 | 	rpc = arpc_alloc(payload, size, type); | 
 | 	if (!rpc) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	spin_lock_irqsave(&es2->arpc_lock, flags); | 
 | 	arpc_add(es2, rpc); | 
 | 	spin_unlock_irqrestore(&es2->arpc_lock, flags); | 
 |  | 
 | 	retval = arpc_send(es2, rpc, timeout); | 
 | 	if (retval) | 
 | 		goto out_arpc_del; | 
 |  | 
 | 	retval = wait_for_completion_interruptible_timeout( | 
 | 						&rpc->response_received, | 
 | 						msecs_to_jiffies(timeout)); | 
 | 	if (retval <= 0) { | 
 | 		if (!retval) | 
 | 			retval = -ETIMEDOUT; | 
 | 		goto out_arpc_del; | 
 | 	} | 
 |  | 
 | 	if (rpc->resp->result) { | 
 | 		retval = -EREMOTEIO; | 
 | 		if (result) | 
 | 			*result = rpc->resp->result; | 
 | 	} else { | 
 | 		retval = 0; | 
 | 	} | 
 |  | 
 | out_arpc_del: | 
 | 	spin_lock_irqsave(&es2->arpc_lock, flags); | 
 | 	arpc_del(es2, rpc); | 
 | 	spin_unlock_irqrestore(&es2->arpc_lock, flags); | 
 | 	arpc_free(rpc); | 
 |  | 
 | 	if (retval < 0 && retval != -EREMOTEIO) { | 
 | 		dev_err(&es2->usb_dev->dev, | 
 | 			"failed to execute ARPC: %d\n", retval); | 
 | 	} | 
 |  | 
 | 	return retval; | 
 | } | 
 |  | 
 | static void arpc_in_callback(struct urb *urb) | 
 | { | 
 | 	struct es2_ap_dev *es2 = urb->context; | 
 | 	struct device *dev = &urb->dev->dev; | 
 | 	int status = check_urb_status(urb); | 
 | 	struct arpc *rpc; | 
 | 	struct arpc_response_message *resp; | 
 | 	unsigned long flags; | 
 | 	int retval; | 
 |  | 
 | 	if (status) { | 
 | 		if ((status == -EAGAIN) || (status == -EPROTO)) | 
 | 			goto exit; | 
 |  | 
 | 		/* The urb is being unlinked */ | 
 | 		if (status == -ENOENT || status == -ESHUTDOWN) | 
 | 			return; | 
 |  | 
 | 		dev_err(dev, "arpc in-urb error %d (dropped)\n", status); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (urb->actual_length < sizeof(*resp)) { | 
 | 		dev_err(dev, "short aprc response received\n"); | 
 | 		goto exit; | 
 | 	} | 
 |  | 
 | 	resp = urb->transfer_buffer; | 
 | 	spin_lock_irqsave(&es2->arpc_lock, flags); | 
 | 	rpc = arpc_find(es2, resp->id); | 
 | 	if (!rpc) { | 
 | 		dev_err(dev, "invalid arpc response id received: %u\n", | 
 | 			le16_to_cpu(resp->id)); | 
 | 		spin_unlock_irqrestore(&es2->arpc_lock, flags); | 
 | 		goto exit; | 
 | 	} | 
 |  | 
 | 	arpc_del(es2, rpc); | 
 | 	memcpy(rpc->resp, resp, sizeof(*resp)); | 
 | 	complete(&rpc->response_received); | 
 | 	spin_unlock_irqrestore(&es2->arpc_lock, flags); | 
 |  | 
 | exit: | 
 | 	/* put our urb back in the request pool */ | 
 | 	retval = usb_submit_urb(urb, GFP_ATOMIC); | 
 | 	if (retval) | 
 | 		dev_err(dev, "failed to resubmit arpc in-urb: %d\n", retval); | 
 | } | 
 |  | 
 | #define APB1_LOG_MSG_SIZE	64 | 
 | static void apb_log_get(struct es2_ap_dev *es2, char *buf) | 
 | { | 
 | 	int retval; | 
 |  | 
 | 	do { | 
 | 		retval = usb_control_msg(es2->usb_dev, | 
 | 					 usb_rcvctrlpipe(es2->usb_dev, 0), | 
 | 					 GB_APB_REQUEST_LOG, | 
 | 					 USB_DIR_IN | USB_TYPE_VENDOR | | 
 | 					 USB_RECIP_INTERFACE, | 
 | 					 0x00, 0x00, | 
 | 					 buf, | 
 | 					 APB1_LOG_MSG_SIZE, | 
 | 					 ES2_USB_CTRL_TIMEOUT); | 
 | 		if (retval > 0) | 
 | 			kfifo_in(&es2->apb_log_fifo, buf, retval); | 
 | 	} while (retval > 0); | 
 | } | 
 |  | 
 | static int apb_log_poll(void *data) | 
 | { | 
 | 	struct es2_ap_dev *es2 = data; | 
 | 	char *buf; | 
 |  | 
 | 	buf = kmalloc(APB1_LOG_MSG_SIZE, GFP_KERNEL); | 
 | 	if (!buf) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	while (!kthread_should_stop()) { | 
 | 		msleep(1000); | 
 | 		apb_log_get(es2, buf); | 
 | 	} | 
 |  | 
 | 	kfree(buf); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static ssize_t apb_log_read(struct file *f, char __user *buf, | 
 | 			    size_t count, loff_t *ppos) | 
 | { | 
 | 	struct es2_ap_dev *es2 = file_inode(f)->i_private; | 
 | 	ssize_t ret; | 
 | 	size_t copied; | 
 | 	char *tmp_buf; | 
 |  | 
 | 	if (count > APB1_LOG_SIZE) | 
 | 		count = APB1_LOG_SIZE; | 
 |  | 
 | 	tmp_buf = kmalloc(count, GFP_KERNEL); | 
 | 	if (!tmp_buf) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	copied = kfifo_out(&es2->apb_log_fifo, tmp_buf, count); | 
 | 	ret = simple_read_from_buffer(buf, count, ppos, tmp_buf, copied); | 
 |  | 
 | 	kfree(tmp_buf); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static const struct file_operations apb_log_fops = { | 
 | 	.read	= apb_log_read, | 
 | }; | 
 |  | 
 | static void usb_log_enable(struct es2_ap_dev *es2) | 
 | { | 
 | 	if (!IS_ERR_OR_NULL(es2->apb_log_task)) | 
 | 		return; | 
 |  | 
 | 	/* get log from APB1 */ | 
 | 	es2->apb_log_task = kthread_run(apb_log_poll, es2, "apb_log"); | 
 | 	if (IS_ERR(es2->apb_log_task)) | 
 | 		return; | 
 | 	/* XXX We will need to rename this per APB */ | 
 | 	es2->apb_log_dentry = debugfs_create_file("apb_log", 0444, | 
 | 						  gb_debugfs_get(), es2, | 
 | 						  &apb_log_fops); | 
 | } | 
 |  | 
 | static void usb_log_disable(struct es2_ap_dev *es2) | 
 | { | 
 | 	if (IS_ERR_OR_NULL(es2->apb_log_task)) | 
 | 		return; | 
 |  | 
 | 	debugfs_remove(es2->apb_log_dentry); | 
 | 	es2->apb_log_dentry = NULL; | 
 |  | 
 | 	kthread_stop(es2->apb_log_task); | 
 | 	es2->apb_log_task = NULL; | 
 | } | 
 |  | 
 | static ssize_t apb_log_enable_read(struct file *f, char __user *buf, | 
 | 				   size_t count, loff_t *ppos) | 
 | { | 
 | 	struct es2_ap_dev *es2 = file_inode(f)->i_private; | 
 | 	int enable = !IS_ERR_OR_NULL(es2->apb_log_task); | 
 | 	char tmp_buf[3]; | 
 |  | 
 | 	sprintf(tmp_buf, "%d\n", enable); | 
 | 	return simple_read_from_buffer(buf, count, ppos, tmp_buf, 2); | 
 | } | 
 |  | 
 | static ssize_t apb_log_enable_write(struct file *f, const char __user *buf, | 
 | 				    size_t count, loff_t *ppos) | 
 | { | 
 | 	int enable; | 
 | 	ssize_t retval; | 
 | 	struct es2_ap_dev *es2 = file_inode(f)->i_private; | 
 |  | 
 | 	retval = kstrtoint_from_user(buf, count, 10, &enable); | 
 | 	if (retval) | 
 | 		return retval; | 
 |  | 
 | 	if (enable) | 
 | 		usb_log_enable(es2); | 
 | 	else | 
 | 		usb_log_disable(es2); | 
 |  | 
 | 	return count; | 
 | } | 
 |  | 
 | static const struct file_operations apb_log_enable_fops = { | 
 | 	.read	= apb_log_enable_read, | 
 | 	.write	= apb_log_enable_write, | 
 | }; | 
 |  | 
 | static int apb_get_cport_count(struct usb_device *udev) | 
 | { | 
 | 	int retval; | 
 | 	__le16 *cport_count; | 
 |  | 
 | 	cport_count = kzalloc(sizeof(*cport_count), GFP_KERNEL); | 
 | 	if (!cport_count) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	retval = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), | 
 | 				 GB_APB_REQUEST_CPORT_COUNT, | 
 | 				 USB_DIR_IN | USB_TYPE_VENDOR | | 
 | 				 USB_RECIP_INTERFACE, 0, 0, cport_count, | 
 | 				 sizeof(*cport_count), ES2_USB_CTRL_TIMEOUT); | 
 | 	if (retval != sizeof(*cport_count)) { | 
 | 		dev_err(&udev->dev, "Cannot retrieve CPort count: %d\n", | 
 | 			retval); | 
 |  | 
 | 		if (retval >= 0) | 
 | 			retval = -EIO; | 
 |  | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	retval = le16_to_cpu(*cport_count); | 
 |  | 
 | 	/* We need to fit a CPort ID in one byte of a message header */ | 
 | 	if (retval > U8_MAX) { | 
 | 		retval = U8_MAX; | 
 | 		dev_warn(&udev->dev, "Limiting number of CPorts to U8_MAX\n"); | 
 | 	} | 
 |  | 
 | out: | 
 | 	kfree(cport_count); | 
 | 	return retval; | 
 | } | 
 |  | 
 | /* | 
 |  * The ES2 USB Bridge device has 15 endpoints | 
 |  * 1 Control - usual USB stuff + AP -> APBridgeA messages | 
 |  * 7 Bulk IN - CPort data in | 
 |  * 7 Bulk OUT - CPort data out | 
 |  */ | 
 | static int ap_probe(struct usb_interface *interface, | 
 | 		    const struct usb_device_id *id) | 
 | { | 
 | 	struct es2_ap_dev *es2; | 
 | 	struct gb_host_device *hd; | 
 | 	struct usb_device *udev; | 
 | 	struct usb_host_interface *iface_desc; | 
 | 	struct usb_endpoint_descriptor *endpoint; | 
 | 	__u8 ep_addr; | 
 | 	int retval; | 
 | 	int i; | 
 | 	int num_cports; | 
 | 	bool bulk_out_found = false; | 
 | 	bool bulk_in_found = false; | 
 | 	bool arpc_in_found = false; | 
 |  | 
 | 	udev = usb_get_dev(interface_to_usbdev(interface)); | 
 |  | 
 | 	num_cports = apb_get_cport_count(udev); | 
 | 	if (num_cports < 0) { | 
 | 		usb_put_dev(udev); | 
 | 		dev_err(&udev->dev, "Cannot retrieve CPort count: %d\n", | 
 | 			num_cports); | 
 | 		return num_cports; | 
 | 	} | 
 |  | 
 | 	hd = gb_hd_create(&es2_driver, &udev->dev, ES2_GBUF_MSG_SIZE_MAX, | 
 | 			  num_cports); | 
 | 	if (IS_ERR(hd)) { | 
 | 		usb_put_dev(udev); | 
 | 		return PTR_ERR(hd); | 
 | 	} | 
 |  | 
 | 	es2 = hd_to_es2(hd); | 
 | 	es2->hd = hd; | 
 | 	es2->usb_intf = interface; | 
 | 	es2->usb_dev = udev; | 
 | 	spin_lock_init(&es2->cport_out_urb_lock); | 
 | 	INIT_KFIFO(es2->apb_log_fifo); | 
 | 	usb_set_intfdata(interface, es2); | 
 |  | 
 | 	/* | 
 | 	 * Reserve the CDSI0 and CDSI1 CPorts so they won't be allocated | 
 | 	 * dynamically. | 
 | 	 */ | 
 | 	retval = gb_hd_cport_reserve(hd, ES2_CPORT_CDSI0); | 
 | 	if (retval) | 
 | 		goto error; | 
 | 	retval = gb_hd_cport_reserve(hd, ES2_CPORT_CDSI1); | 
 | 	if (retval) | 
 | 		goto error; | 
 |  | 
 | 	/* find all bulk endpoints */ | 
 | 	iface_desc = interface->cur_altsetting; | 
 | 	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { | 
 | 		endpoint = &iface_desc->endpoint[i].desc; | 
 | 		ep_addr = endpoint->bEndpointAddress; | 
 |  | 
 | 		if (usb_endpoint_is_bulk_in(endpoint)) { | 
 | 			if (!bulk_in_found) { | 
 | 				es2->cport_in.endpoint = ep_addr; | 
 | 				bulk_in_found = true; | 
 | 			} else if (!arpc_in_found) { | 
 | 				es2->arpc_endpoint_in = ep_addr; | 
 | 				arpc_in_found = true; | 
 | 			} else { | 
 | 				dev_warn(&udev->dev, | 
 | 					 "Unused bulk IN endpoint found: 0x%02x\n", | 
 | 					 ep_addr); | 
 | 			} | 
 | 			continue; | 
 | 		} | 
 | 		if (usb_endpoint_is_bulk_out(endpoint)) { | 
 | 			if (!bulk_out_found) { | 
 | 				es2->cport_out_endpoint = ep_addr; | 
 | 				bulk_out_found = true; | 
 | 			} else { | 
 | 				dev_warn(&udev->dev, | 
 | 					 "Unused bulk OUT endpoint found: 0x%02x\n", | 
 | 					 ep_addr); | 
 | 			} | 
 | 			continue; | 
 | 		} | 
 | 		dev_warn(&udev->dev, | 
 | 			 "Unknown endpoint type found, address 0x%02x\n", | 
 | 			 ep_addr); | 
 | 	} | 
 | 	if (!bulk_in_found || !arpc_in_found || !bulk_out_found) { | 
 | 		dev_err(&udev->dev, "Not enough endpoints found in device, aborting!\n"); | 
 | 		retval = -ENODEV; | 
 | 		goto error; | 
 | 	} | 
 |  | 
 | 	/* Allocate buffers for our cport in messages */ | 
 | 	for (i = 0; i < NUM_CPORT_IN_URB; ++i) { | 
 | 		struct urb *urb; | 
 | 		u8 *buffer; | 
 |  | 
 | 		urb = usb_alloc_urb(0, GFP_KERNEL); | 
 | 		if (!urb) { | 
 | 			retval = -ENOMEM; | 
 | 			goto error; | 
 | 		} | 
 | 		es2->cport_in.urb[i] = urb; | 
 |  | 
 | 		buffer = kmalloc(ES2_GBUF_MSG_SIZE_MAX, GFP_KERNEL); | 
 | 		if (!buffer) { | 
 | 			retval = -ENOMEM; | 
 | 			goto error; | 
 | 		} | 
 |  | 
 | 		usb_fill_bulk_urb(urb, udev, | 
 | 				  usb_rcvbulkpipe(udev, es2->cport_in.endpoint), | 
 | 				  buffer, ES2_GBUF_MSG_SIZE_MAX, | 
 | 				  cport_in_callback, hd); | 
 |  | 
 | 		es2->cport_in.buffer[i] = buffer; | 
 | 	} | 
 |  | 
 | 	/* Allocate buffers for ARPC in messages */ | 
 | 	for (i = 0; i < NUM_ARPC_IN_URB; ++i) { | 
 | 		struct urb *urb; | 
 | 		u8 *buffer; | 
 |  | 
 | 		urb = usb_alloc_urb(0, GFP_KERNEL); | 
 | 		if (!urb) { | 
 | 			retval = -ENOMEM; | 
 | 			goto error; | 
 | 		} | 
 | 		es2->arpc_urb[i] = urb; | 
 |  | 
 | 		buffer = kmalloc(ARPC_IN_SIZE_MAX, GFP_KERNEL); | 
 | 		if (!buffer) { | 
 | 			retval = -ENOMEM; | 
 | 			goto error; | 
 | 		} | 
 |  | 
 | 		usb_fill_bulk_urb(urb, udev, | 
 | 				  usb_rcvbulkpipe(udev, | 
 | 						  es2->arpc_endpoint_in), | 
 | 				  buffer, ARPC_IN_SIZE_MAX, | 
 | 				  arpc_in_callback, es2); | 
 |  | 
 | 		es2->arpc_buffer[i] = buffer; | 
 | 	} | 
 |  | 
 | 	/* Allocate urbs for our CPort OUT messages */ | 
 | 	for (i = 0; i < NUM_CPORT_OUT_URB; ++i) { | 
 | 		struct urb *urb; | 
 |  | 
 | 		urb = usb_alloc_urb(0, GFP_KERNEL); | 
 | 		if (!urb) { | 
 | 			retval = -ENOMEM; | 
 | 			goto error; | 
 | 		} | 
 |  | 
 | 		es2->cport_out_urb[i] = urb; | 
 | 		es2->cport_out_urb_busy[i] = false;	/* just to be anal */ | 
 | 	} | 
 |  | 
 | 	/* XXX We will need to rename this per APB */ | 
 | 	es2->apb_log_enable_dentry = debugfs_create_file("apb_log_enable", | 
 | 							 0644, | 
 | 							 gb_debugfs_get(), es2, | 
 | 							 &apb_log_enable_fops); | 
 |  | 
 | 	INIT_LIST_HEAD(&es2->arpcs); | 
 | 	spin_lock_init(&es2->arpc_lock); | 
 |  | 
 | 	retval = es2_arpc_in_enable(es2); | 
 | 	if (retval) | 
 | 		goto error; | 
 |  | 
 | 	retval = gb_hd_add(hd); | 
 | 	if (retval) | 
 | 		goto err_disable_arpc_in; | 
 |  | 
 | 	retval = es2_cport_in_enable(es2, &es2->cport_in); | 
 | 	if (retval) | 
 | 		goto err_hd_del; | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_hd_del: | 
 | 	gb_hd_del(hd); | 
 | err_disable_arpc_in: | 
 | 	es2_arpc_in_disable(es2); | 
 | error: | 
 | 	es2_destroy(es2); | 
 |  | 
 | 	return retval; | 
 | } | 
 |  | 
 | static void ap_disconnect(struct usb_interface *interface) | 
 | { | 
 | 	struct es2_ap_dev *es2 = usb_get_intfdata(interface); | 
 |  | 
 | 	gb_hd_del(es2->hd); | 
 |  | 
 | 	es2_cport_in_disable(es2, &es2->cport_in); | 
 | 	es2_arpc_in_disable(es2); | 
 |  | 
 | 	es2_destroy(es2); | 
 | } | 
 |  | 
 | static struct usb_driver es2_ap_driver = { | 
 | 	.name =		"es2_ap_driver", | 
 | 	.probe =	ap_probe, | 
 | 	.disconnect =	ap_disconnect, | 
 | 	.id_table =	id_table, | 
 | 	.soft_unbind =	1, | 
 | }; | 
 |  | 
 | module_usb_driver(es2_ap_driver); | 
 |  | 
 | MODULE_LICENSE("GPL v2"); | 
 | MODULE_AUTHOR("Greg Kroah-Hartman <gregkh@linuxfoundation.org>"); |