| // SPDX-License-Identifier: GPL-2.0-only | 
 | /** | 
 |  * timer-ti-32k.c - OMAP2 32k Timer Support | 
 |  * | 
 |  * Copyright (C) 2009 Nokia Corporation | 
 |  * | 
 |  * Update to use new clocksource/clockevent layers | 
 |  * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> | 
 |  * Copyright (C) 2007 MontaVista Software, Inc. | 
 |  * | 
 |  * Original driver: | 
 |  * Copyright (C) 2005 Nokia Corporation | 
 |  * Author: Paul Mundt <paul.mundt@nokia.com> | 
 |  *         Juha Yrjölä <juha.yrjola@nokia.com> | 
 |  * OMAP Dual-mode timer framework support by Timo Teras | 
 |  * | 
 |  * Some parts based off of TI's 24xx code: | 
 |  * | 
 |  * Copyright (C) 2004-2009 Texas Instruments, Inc. | 
 |  * | 
 |  * Roughly modelled after the OMAP1 MPU timer code. | 
 |  * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> | 
 |  * | 
 |  * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com | 
 |  */ | 
 |  | 
 | #include <linux/clk.h> | 
 | #include <linux/init.h> | 
 | #include <linux/time.h> | 
 | #include <linux/sched_clock.h> | 
 | #include <linux/clocksource.h> | 
 | #include <linux/of.h> | 
 | #include <linux/of_address.h> | 
 |  | 
 | /* | 
 |  * 32KHz clocksource ... always available, on pretty most chips except | 
 |  * OMAP 730 and 1510.  Other timers could be used as clocksources, with | 
 |  * higher resolution in free-running counter modes (e.g. 12 MHz xtal), | 
 |  * but systems won't necessarily want to spend resources that way. | 
 |  */ | 
 |  | 
 | #define OMAP2_32KSYNCNT_REV_OFF		0x0 | 
 | #define OMAP2_32KSYNCNT_REV_SCHEME	(0x3 << 30) | 
 | #define OMAP2_32KSYNCNT_CR_OFF_LOW	0x10 | 
 | #define OMAP2_32KSYNCNT_CR_OFF_HIGH	0x30 | 
 |  | 
 | struct ti_32k { | 
 | 	void __iomem		*base; | 
 | 	void __iomem		*counter; | 
 | 	struct clocksource	cs; | 
 | }; | 
 |  | 
 | static inline struct ti_32k *to_ti_32k(struct clocksource *cs) | 
 | { | 
 | 	return container_of(cs, struct ti_32k, cs); | 
 | } | 
 |  | 
 | static u64 notrace ti_32k_read_cycles(struct clocksource *cs) | 
 | { | 
 | 	struct ti_32k *ti = to_ti_32k(cs); | 
 |  | 
 | 	return (u64)readl_relaxed(ti->counter); | 
 | } | 
 |  | 
 | static struct ti_32k ti_32k_timer = { | 
 | 	.cs = { | 
 | 		.name		= "32k_counter", | 
 | 		.rating		= 250, | 
 | 		.read		= ti_32k_read_cycles, | 
 | 		.mask		= CLOCKSOURCE_MASK(32), | 
 | 		.flags		= CLOCK_SOURCE_IS_CONTINUOUS, | 
 | 	}, | 
 | }; | 
 |  | 
 | static u64 notrace omap_32k_read_sched_clock(void) | 
 | { | 
 | 	return ti_32k_read_cycles(&ti_32k_timer.cs); | 
 | } | 
 |  | 
 | static void __init ti_32k_timer_enable_clock(struct device_node *np, | 
 | 					     const char *name) | 
 | { | 
 | 	struct clk *clock; | 
 | 	int error; | 
 |  | 
 | 	clock = of_clk_get_by_name(np->parent, name); | 
 | 	if (IS_ERR(clock)) { | 
 | 		/* Only some SoCs have a separate interface clock */ | 
 | 		if (PTR_ERR(clock) == -EINVAL && !strncmp("ick", name, 3)) | 
 | 			return; | 
 |  | 
 | 		pr_warn("%s: could not get clock %s %li\n", | 
 | 			__func__, name, PTR_ERR(clock)); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	error = clk_prepare_enable(clock); | 
 | 	if (error) { | 
 | 		pr_warn("%s: could not enable %s: %i\n", | 
 | 			__func__, name, error); | 
 | 		return; | 
 | 	} | 
 | } | 
 |  | 
 | static void __init ti_32k_timer_module_init(struct device_node *np, | 
 | 					    void __iomem *base) | 
 | { | 
 | 	void __iomem *sysc = base + 4; | 
 |  | 
 | 	if (!of_device_is_compatible(np->parent, "ti,sysc")) | 
 | 		return; | 
 |  | 
 | 	ti_32k_timer_enable_clock(np, "fck"); | 
 | 	ti_32k_timer_enable_clock(np, "ick"); | 
 |  | 
 | 	/* | 
 | 	 * Force idle module as wkup domain is active with MPU. | 
 | 	 * No need to tag the module disabled for ti-sysc probe. | 
 | 	 */ | 
 | 	writel_relaxed(0, sysc); | 
 | } | 
 |  | 
 | static int __init ti_32k_timer_init(struct device_node *np) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	ti_32k_timer.base = of_iomap(np, 0); | 
 | 	if (!ti_32k_timer.base) { | 
 | 		pr_err("Can't ioremap 32k timer base\n"); | 
 | 		return -ENXIO; | 
 | 	} | 
 |  | 
 | 	if (!of_machine_is_compatible("ti,am43")) | 
 | 		ti_32k_timer.cs.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP; | 
 |  | 
 | 	ti_32k_timer.counter = ti_32k_timer.base; | 
 | 	ti_32k_timer_module_init(np, ti_32k_timer.base); | 
 |  | 
 | 	/* | 
 | 	 * 32k sync Counter IP register offsets vary between the highlander | 
 | 	 * version and the legacy ones. | 
 | 	 * | 
 | 	 * The 'SCHEME' bits(30-31) of the revision register is used to identify | 
 | 	 * the version. | 
 | 	 */ | 
 | 	if (readl_relaxed(ti_32k_timer.base + OMAP2_32KSYNCNT_REV_OFF) & | 
 | 			OMAP2_32KSYNCNT_REV_SCHEME) | 
 | 		ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_HIGH; | 
 | 	else | 
 | 		ti_32k_timer.counter += OMAP2_32KSYNCNT_CR_OFF_LOW; | 
 |  | 
 | 	pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n"); | 
 |  | 
 | 	ret = clocksource_register_hz(&ti_32k_timer.cs, 32768); | 
 | 	if (ret) { | 
 | 		pr_err("32k_counter: can't register clocksource\n"); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	sched_clock_register(omap_32k_read_sched_clock, 32, 32768); | 
 |  | 
 | 	return 0; | 
 | } | 
 | TIMER_OF_DECLARE(ti_32k_timer, "ti,omap-counter32k", | 
 | 		ti_32k_timer_init); |