blob: caf7291ffaf83d544e1c44858f282ce6b4728789 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* drivers/net/phy/smsc.c
*
* Driver for SMSC PHYs
*
* Author: Herbert Valerio Riedel
*
* Copyright (c) 2006 Herbert Valerio Riedel <hvr@gnu.org>
*
* Support added for SMSC LAN8187 and LAN8700 by steve.glendinning@shawell.net
*
*/
#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/of.h>
#include <linux/phy.h>
#include <linux/netdevice.h>
#include <linux/smscphy.h>
/* Vendor-specific PHY Definitions */
/* EDPD NLP / crossover time configuration */
#define PHY_EDPD_CONFIG 16
#define PHY_EDPD_CONFIG_EXT_CROSSOVER_ 0x0001
/* Control/Status Indication Register */
#define SPECIAL_CTRL_STS 27
#define SPECIAL_CTRL_STS_OVRRD_AMDIX_ 0x8000
#define SPECIAL_CTRL_STS_AMDIX_ENABLE_ 0x4000
#define SPECIAL_CTRL_STS_AMDIX_STATE_ 0x2000
struct smsc_hw_stat {
const char *string;
u8 reg;
u8 bits;
};
static struct smsc_hw_stat smsc_hw_stats[] = {
{ "phy_symbol_errors", 26, 16},
};
struct smsc_phy_priv {
bool energy_enable;
struct clk *refclk;
};
static int smsc_phy_config_intr(struct phy_device *phydev)
{
struct smsc_phy_priv *priv = phydev->priv;
u16 intmask = 0;
int rc;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
intmask = MII_LAN83C185_ISF_INT4 | MII_LAN83C185_ISF_INT6;
if (priv->energy_enable)
intmask |= MII_LAN83C185_ISF_INT7;
}
rc = phy_write(phydev, MII_LAN83C185_IM, intmask);
return rc < 0 ? rc : 0;
}
static int smsc_phy_ack_interrupt(struct phy_device *phydev)
{
int rc = phy_read (phydev, MII_LAN83C185_ISF);
return rc < 0 ? rc : 0;
}
static int smsc_phy_config_init(struct phy_device *phydev)
{
struct smsc_phy_priv *priv = phydev->priv;
int rc;
if (!priv->energy_enable)
return 0;
rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
if (rc < 0)
return rc;
/* Enable energy detect mode for this SMSC Transceivers */
rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
rc | MII_LAN83C185_EDPWRDOWN);
if (rc < 0)
return rc;
return smsc_phy_ack_interrupt(phydev);
}
static int smsc_phy_reset(struct phy_device *phydev)
{
int rc = phy_read(phydev, MII_LAN83C185_SPECIAL_MODES);
if (rc < 0)
return rc;
/* If the SMSC PHY is in power down mode, then set it
* in all capable mode before using it.
*/
if ((rc & MII_LAN83C185_MODE_MASK) == MII_LAN83C185_MODE_POWERDOWN) {
/* set "all capable" mode */
rc |= MII_LAN83C185_MODE_ALL;
phy_write(phydev, MII_LAN83C185_SPECIAL_MODES, rc);
}
/* reset the phy */
return genphy_soft_reset(phydev);
}
static int lan911x_config_init(struct phy_device *phydev)
{
return smsc_phy_ack_interrupt(phydev);
}
static int lan87xx_config_aneg(struct phy_device *phydev)
{
int rc;
int val;
switch (phydev->mdix_ctrl) {
case ETH_TP_MDI:
val = SPECIAL_CTRL_STS_OVRRD_AMDIX_;
break;
case ETH_TP_MDI_X:
val = SPECIAL_CTRL_STS_OVRRD_AMDIX_ |
SPECIAL_CTRL_STS_AMDIX_STATE_;
break;
case ETH_TP_MDI_AUTO:
val = SPECIAL_CTRL_STS_AMDIX_ENABLE_;
break;
default:
return genphy_config_aneg(phydev);
}
rc = phy_read(phydev, SPECIAL_CTRL_STS);
if (rc < 0)
return rc;
rc &= ~(SPECIAL_CTRL_STS_OVRRD_AMDIX_ |
SPECIAL_CTRL_STS_AMDIX_ENABLE_ |
SPECIAL_CTRL_STS_AMDIX_STATE_);
rc |= val;
phy_write(phydev, SPECIAL_CTRL_STS, rc);
phydev->mdix = phydev->mdix_ctrl;
return genphy_config_aneg(phydev);
}
static int lan95xx_config_aneg_ext(struct phy_device *phydev)
{
int rc;
if (phydev->phy_id != 0x0007c0f0) /* not (LAN9500A or LAN9505A) */
return lan87xx_config_aneg(phydev);
/* Extend Manual AutoMDIX timer */
rc = phy_read(phydev, PHY_EDPD_CONFIG);
if (rc < 0)
return rc;
rc |= PHY_EDPD_CONFIG_EXT_CROSSOVER_;
phy_write(phydev, PHY_EDPD_CONFIG, rc);
return lan87xx_config_aneg(phydev);
}
/*
* The LAN87xx suffers from rare absence of the ENERGYON-bit when Ethernet cable
* plugs in while LAN87xx is in Energy Detect Power-Down mode. This leads to
* unstable detection of plugging in Ethernet cable.
* This workaround disables Energy Detect Power-Down mode and waiting for
* response on link pulses to detect presence of plugged Ethernet cable.
* The Energy Detect Power-Down mode is enabled again in the end of procedure to
* save approximately 220 mW of power if cable is unplugged.
*/
static int lan87xx_read_status(struct phy_device *phydev)
{
struct smsc_phy_priv *priv = phydev->priv;
int err = genphy_read_status(phydev);
if (!phydev->link && priv->energy_enable) {
/* Disable EDPD to wake up PHY */
int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
if (rc < 0)
return rc;
rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
rc & ~MII_LAN83C185_EDPWRDOWN);
if (rc < 0)
return rc;
/* Wait max 640 ms to detect energy and the timeout is not
* an actual error.
*/
read_poll_timeout(phy_read, rc,
rc & MII_LAN83C185_ENERGYON || rc < 0,
10000, 640000, true, phydev,
MII_LAN83C185_CTRL_STATUS);
if (rc < 0)
return rc;
/* Re-enable EDPD */
rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
if (rc < 0)
return rc;
rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
rc | MII_LAN83C185_EDPWRDOWN);
if (rc < 0)
return rc;
}
return err;
}
static int smsc_get_sset_count(struct phy_device *phydev)
{
return ARRAY_SIZE(smsc_hw_stats);
}
static void smsc_get_strings(struct phy_device *phydev, u8 *data)
{
int i;
for (i = 0; i < ARRAY_SIZE(smsc_hw_stats); i++) {
strncpy(data + i * ETH_GSTRING_LEN,
smsc_hw_stats[i].string, ETH_GSTRING_LEN);
}
}
static u64 smsc_get_stat(struct phy_device *phydev, int i)
{
struct smsc_hw_stat stat = smsc_hw_stats[i];
int val;
u64 ret;
val = phy_read(phydev, stat.reg);
if (val < 0)
ret = U64_MAX;
else
ret = val;
return ret;
}
static void smsc_get_stats(struct phy_device *phydev,
struct ethtool_stats *stats, u64 *data)
{
int i;
for (i = 0; i < ARRAY_SIZE(smsc_hw_stats); i++)
data[i] = smsc_get_stat(phydev, i);
}
static void smsc_phy_remove(struct phy_device *phydev)
{
struct smsc_phy_priv *priv = phydev->priv;
clk_disable_unprepare(priv->refclk);
clk_put(priv->refclk);
}
static int smsc_phy_probe(struct phy_device *phydev)
{
struct device *dev = &phydev->mdio.dev;
struct device_node *of_node = dev->of_node;
struct smsc_phy_priv *priv;
int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->energy_enable = true;
if (of_property_read_bool(of_node, "smsc,disable-energy-detect"))
priv->energy_enable = false;
phydev->priv = priv;
/* Make clk optional to keep DTB backward compatibility. */
priv->refclk = clk_get_optional(dev, NULL);
if (IS_ERR(priv->refclk))
return dev_err_probe(dev, PTR_ERR(priv->refclk),
"Failed to request clock\n");
ret = clk_prepare_enable(priv->refclk);
if (ret)
return ret;
ret = clk_set_rate(priv->refclk, 50 * 1000 * 1000);
if (ret) {
clk_disable_unprepare(priv->refclk);
return ret;
}
return 0;
}
static struct phy_driver smsc_phy_driver[] = {
{
.phy_id = 0x0007c0a0, /* OUI=0x00800f, Model#=0x0a */
.phy_id_mask = 0xfffffff0,
.name = "SMSC LAN83C185",
/* PHY_BASIC_FEATURES */
.probe = smsc_phy_probe,
/* basic functions */
.config_init = smsc_phy_config_init,
.soft_reset = smsc_phy_reset,
/* IRQ related */
.ack_interrupt = smsc_phy_ack_interrupt,
.config_intr = smsc_phy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
.phy_id = 0x0007c0b0, /* OUI=0x00800f, Model#=0x0b */
.phy_id_mask = 0xfffffff0,
.name = "SMSC LAN8187",
/* PHY_BASIC_FEATURES */
.probe = smsc_phy_probe,
/* basic functions */
.config_init = smsc_phy_config_init,
.soft_reset = smsc_phy_reset,
/* IRQ related */
.ack_interrupt = smsc_phy_ack_interrupt,
.config_intr = smsc_phy_config_intr,
/* Statistics */
.get_sset_count = smsc_get_sset_count,
.get_strings = smsc_get_strings,
.get_stats = smsc_get_stats,
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
/* This covers internal PHY (phy_id: 0x0007C0C3) for
* LAN9500 (PID: 0x9500), LAN9514 (PID: 0xec00), LAN9505 (PID: 0x9505)
*/
.phy_id = 0x0007c0c0, /* OUI=0x00800f, Model#=0x0c */
.phy_id_mask = 0xfffffff0,
.name = "SMSC LAN8700",
/* PHY_BASIC_FEATURES */
.probe = smsc_phy_probe,
/* basic functions */
.read_status = lan87xx_read_status,
.config_init = smsc_phy_config_init,
.soft_reset = smsc_phy_reset,
.config_aneg = lan87xx_config_aneg,
/* IRQ related */
.ack_interrupt = smsc_phy_ack_interrupt,
.config_intr = smsc_phy_config_intr,
/* Statistics */
.get_sset_count = smsc_get_sset_count,
.get_strings = smsc_get_strings,
.get_stats = smsc_get_stats,
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
.phy_id = 0x0007c0d0, /* OUI=0x00800f, Model#=0x0d */
.phy_id_mask = 0xfffffff0,
.name = "SMSC LAN911x Internal PHY",
/* PHY_BASIC_FEATURES */
.probe = smsc_phy_probe,
/* basic functions */
.config_init = lan911x_config_init,
/* IRQ related */
.ack_interrupt = smsc_phy_ack_interrupt,
.config_intr = smsc_phy_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
/* This covers internal PHY (phy_id: 0x0007C0F0) for
* LAN9500A (PID: 0x9E00), LAN9505A (PID: 0x9E01)
*/
.phy_id = 0x0007c0f0, /* OUI=0x00800f, Model#=0x0f */
.phy_id_mask = 0xfffffff0,
.name = "SMSC LAN8710/LAN8720",
/* PHY_BASIC_FEATURES */
.probe = smsc_phy_probe,
.remove = smsc_phy_remove,
/* basic functions */
.read_status = lan87xx_read_status,
.config_init = smsc_phy_config_init,
.soft_reset = smsc_phy_reset,
.config_aneg = lan95xx_config_aneg_ext,
/* IRQ related */
.ack_interrupt = smsc_phy_ack_interrupt,
.config_intr = smsc_phy_config_intr,
/* Statistics */
.get_sset_count = smsc_get_sset_count,
.get_strings = smsc_get_strings,
.get_stats = smsc_get_stats,
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
.phy_id = 0x0007c110,
.phy_id_mask = 0xfffffff0,
.name = "SMSC LAN8740",
/* PHY_BASIC_FEATURES */
.flags = PHY_RST_AFTER_CLK_EN,
.probe = smsc_phy_probe,
/* basic functions */
.read_status = lan87xx_read_status,
.config_init = smsc_phy_config_init,
.soft_reset = smsc_phy_reset,
/* IRQ related */
.ack_interrupt = smsc_phy_ack_interrupt,
.config_intr = smsc_phy_config_intr,
/* Statistics */
.get_sset_count = smsc_get_sset_count,
.get_strings = smsc_get_strings,
.get_stats = smsc_get_stats,
.suspend = genphy_suspend,
.resume = genphy_resume,
} };
module_phy_driver(smsc_phy_driver);
MODULE_DESCRIPTION("SMSC PHY driver");
MODULE_AUTHOR("Herbert Valerio Riedel");
MODULE_LICENSE("GPL");
static struct mdio_device_id __maybe_unused smsc_tbl[] = {
{ 0x0007c0a0, 0xfffffff0 },
{ 0x0007c0b0, 0xfffffff0 },
{ 0x0007c0c0, 0xfffffff0 },
{ 0x0007c0d0, 0xfffffff0 },
{ 0x0007c0f0, 0xfffffff0 },
{ 0x0007c110, 0xfffffff0 },
{ }
};
MODULE_DEVICE_TABLE(mdio, smsc_tbl);