|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * Interface handling | 
|  | * | 
|  | * Copyright 2002-2005, Instant802 Networks, Inc. | 
|  | * Copyright 2005-2006, Devicescape Software, Inc. | 
|  | * Copyright (c) 2006 Jiri Benc <jbenc@suse.cz> | 
|  | * Copyright 2008, Johannes Berg <johannes@sipsolutions.net> | 
|  | * Copyright 2013-2014  Intel Mobile Communications GmbH | 
|  | * Copyright (c) 2016        Intel Deutschland GmbH | 
|  | * Copyright (C) 2018-2022 Intel Corporation | 
|  | */ | 
|  | #include <linux/slab.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/if_arp.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/rtnetlink.h> | 
|  | #include <linux/kcov.h> | 
|  | #include <net/mac80211.h> | 
|  | #include <net/ieee80211_radiotap.h> | 
|  | #include "ieee80211_i.h" | 
|  | #include "sta_info.h" | 
|  | #include "debugfs_netdev.h" | 
|  | #include "mesh.h" | 
|  | #include "led.h" | 
|  | #include "driver-ops.h" | 
|  | #include "wme.h" | 
|  | #include "rate.h" | 
|  |  | 
|  | /** | 
|  | * DOC: Interface list locking | 
|  | * | 
|  | * The interface list in each struct ieee80211_local is protected | 
|  | * three-fold: | 
|  | * | 
|  | * (1) modifications may only be done under the RTNL | 
|  | * (2) modifications and readers are protected against each other by | 
|  | *     the iflist_mtx. | 
|  | * (3) modifications are done in an RCU manner so atomic readers | 
|  | *     can traverse the list in RCU-safe blocks. | 
|  | * | 
|  | * As a consequence, reads (traversals) of the list can be protected | 
|  | * by either the RTNL, the iflist_mtx or RCU. | 
|  | */ | 
|  |  | 
|  | static void ieee80211_iface_work(struct work_struct *work); | 
|  |  | 
|  | bool __ieee80211_recalc_txpower(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_chanctx_conf *chanctx_conf; | 
|  | int power; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | chanctx_conf = rcu_dereference(sdata->vif.bss_conf.chanctx_conf); | 
|  | if (!chanctx_conf) { | 
|  | rcu_read_unlock(); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | power = ieee80211_chandef_max_power(&chanctx_conf->def); | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | if (sdata->deflink.user_power_level != IEEE80211_UNSET_POWER_LEVEL) | 
|  | power = min(power, sdata->deflink.user_power_level); | 
|  |  | 
|  | if (sdata->deflink.ap_power_level != IEEE80211_UNSET_POWER_LEVEL) | 
|  | power = min(power, sdata->deflink.ap_power_level); | 
|  |  | 
|  | if (power != sdata->vif.bss_conf.txpower) { | 
|  | sdata->vif.bss_conf.txpower = power; | 
|  | ieee80211_hw_config(sdata->local, 0); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | void ieee80211_recalc_txpower(struct ieee80211_sub_if_data *sdata, | 
|  | bool update_bss) | 
|  | { | 
|  | if (__ieee80211_recalc_txpower(sdata) || | 
|  | (update_bss && ieee80211_sdata_running(sdata))) | 
|  | ieee80211_link_info_change_notify(sdata, &sdata->deflink, | 
|  | BSS_CHANGED_TXPOWER); | 
|  | } | 
|  |  | 
|  | static u32 __ieee80211_idle_off(struct ieee80211_local *local) | 
|  | { | 
|  | if (!(local->hw.conf.flags & IEEE80211_CONF_IDLE)) | 
|  | return 0; | 
|  |  | 
|  | local->hw.conf.flags &= ~IEEE80211_CONF_IDLE; | 
|  | return IEEE80211_CONF_CHANGE_IDLE; | 
|  | } | 
|  |  | 
|  | static u32 __ieee80211_idle_on(struct ieee80211_local *local) | 
|  | { | 
|  | if (local->hw.conf.flags & IEEE80211_CONF_IDLE) | 
|  | return 0; | 
|  |  | 
|  | ieee80211_flush_queues(local, NULL, false); | 
|  |  | 
|  | local->hw.conf.flags |= IEEE80211_CONF_IDLE; | 
|  | return IEEE80211_CONF_CHANGE_IDLE; | 
|  | } | 
|  |  | 
|  | static u32 __ieee80211_recalc_idle(struct ieee80211_local *local, | 
|  | bool force_active) | 
|  | { | 
|  | bool working, scanning, active; | 
|  | unsigned int led_trig_start = 0, led_trig_stop = 0; | 
|  |  | 
|  | lockdep_assert_held(&local->mtx); | 
|  |  | 
|  | active = force_active || | 
|  | !list_empty(&local->chanctx_list) || | 
|  | local->monitors; | 
|  |  | 
|  | working = !local->ops->remain_on_channel && | 
|  | !list_empty(&local->roc_list); | 
|  |  | 
|  | scanning = test_bit(SCAN_SW_SCANNING, &local->scanning) || | 
|  | test_bit(SCAN_ONCHANNEL_SCANNING, &local->scanning); | 
|  |  | 
|  | if (working || scanning) | 
|  | led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_WORK; | 
|  | else | 
|  | led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_WORK; | 
|  |  | 
|  | if (active) | 
|  | led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED; | 
|  | else | 
|  | led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED; | 
|  |  | 
|  | ieee80211_mod_tpt_led_trig(local, led_trig_start, led_trig_stop); | 
|  |  | 
|  | if (working || scanning || active) | 
|  | return __ieee80211_idle_off(local); | 
|  | return __ieee80211_idle_on(local); | 
|  | } | 
|  |  | 
|  | u32 ieee80211_idle_off(struct ieee80211_local *local) | 
|  | { | 
|  | return __ieee80211_recalc_idle(local, true); | 
|  | } | 
|  |  | 
|  | void ieee80211_recalc_idle(struct ieee80211_local *local) | 
|  | { | 
|  | u32 change = __ieee80211_recalc_idle(local, false); | 
|  | if (change) | 
|  | ieee80211_hw_config(local, change); | 
|  | } | 
|  |  | 
|  | static int ieee80211_verify_mac(struct ieee80211_sub_if_data *sdata, u8 *addr, | 
|  | bool check_dup) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_sub_if_data *iter; | 
|  | u64 new, mask, tmp; | 
|  | u8 *m; | 
|  | int ret = 0; | 
|  |  | 
|  | if (is_zero_ether_addr(local->hw.wiphy->addr_mask)) | 
|  | return 0; | 
|  |  | 
|  | m = addr; | 
|  | new =	((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) | | 
|  | ((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) | | 
|  | ((u64)m[4] << 1*8) | ((u64)m[5] << 0*8); | 
|  |  | 
|  | m = local->hw.wiphy->addr_mask; | 
|  | mask =	((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) | | 
|  | ((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) | | 
|  | ((u64)m[4] << 1*8) | ((u64)m[5] << 0*8); | 
|  |  | 
|  | if (!check_dup) | 
|  | return ret; | 
|  |  | 
|  | mutex_lock(&local->iflist_mtx); | 
|  | list_for_each_entry(iter, &local->interfaces, list) { | 
|  | if (iter == sdata) | 
|  | continue; | 
|  |  | 
|  | if (iter->vif.type == NL80211_IFTYPE_MONITOR && | 
|  | !(iter->u.mntr.flags & MONITOR_FLAG_ACTIVE)) | 
|  | continue; | 
|  |  | 
|  | m = iter->vif.addr; | 
|  | tmp =	((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) | | 
|  | ((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) | | 
|  | ((u64)m[4] << 1*8) | ((u64)m[5] << 0*8); | 
|  |  | 
|  | if ((new & ~mask) != (tmp & ~mask)) { | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  | } | 
|  | mutex_unlock(&local->iflist_mtx); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ieee80211_can_powered_addr_change(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_roc_work *roc; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_sub_if_data *scan_sdata; | 
|  | int ret = 0; | 
|  |  | 
|  | /* To be the most flexible here we want to only limit changing the | 
|  | * address if the specific interface is doing offchannel work or | 
|  | * scanning. | 
|  | */ | 
|  | if (netif_carrier_ok(sdata->dev)) | 
|  | return -EBUSY; | 
|  |  | 
|  | mutex_lock(&local->mtx); | 
|  |  | 
|  | /* First check no ROC work is happening on this iface */ | 
|  | list_for_each_entry(roc, &local->roc_list, list) { | 
|  | if (roc->sdata != sdata) | 
|  | continue; | 
|  |  | 
|  | if (roc->started) { | 
|  | ret = -EBUSY; | 
|  | goto unlock; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* And if this iface is scanning */ | 
|  | if (local->scanning) { | 
|  | scan_sdata = rcu_dereference_protected(local->scan_sdata, | 
|  | lockdep_is_held(&local->mtx)); | 
|  | if (sdata == scan_sdata) | 
|  | ret = -EBUSY; | 
|  | } | 
|  |  | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_STATION: | 
|  | case NL80211_IFTYPE_P2P_CLIENT: | 
|  | /* More interface types could be added here but changing the | 
|  | * address while powered makes the most sense in client modes. | 
|  | */ | 
|  | break; | 
|  | default: | 
|  | ret = -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | unlock: | 
|  | mutex_unlock(&local->mtx); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ieee80211_change_mac(struct net_device *dev, void *addr) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct sockaddr *sa = addr; | 
|  | bool check_dup = true; | 
|  | bool live = false; | 
|  | int ret; | 
|  |  | 
|  | if (ieee80211_sdata_running(sdata)) { | 
|  | ret = ieee80211_can_powered_addr_change(sdata); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | live = true; | 
|  | } | 
|  |  | 
|  | if (sdata->vif.type == NL80211_IFTYPE_MONITOR && | 
|  | !(sdata->u.mntr.flags & MONITOR_FLAG_ACTIVE)) | 
|  | check_dup = false; | 
|  |  | 
|  | ret = ieee80211_verify_mac(sdata, sa->sa_data, check_dup); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (live) | 
|  | drv_remove_interface(local, sdata); | 
|  | ret = eth_mac_addr(dev, sa); | 
|  |  | 
|  | if (ret == 0) { | 
|  | memcpy(sdata->vif.addr, sa->sa_data, ETH_ALEN); | 
|  | ether_addr_copy(sdata->vif.bss_conf.addr, sdata->vif.addr); | 
|  | } | 
|  |  | 
|  | /* Regardless of eth_mac_addr() return we still want to add the | 
|  | * interface back. This should not fail... | 
|  | */ | 
|  | if (live) | 
|  | WARN_ON(drv_add_interface(local, sdata)); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static inline int identical_mac_addr_allowed(int type1, int type2) | 
|  | { | 
|  | return type1 == NL80211_IFTYPE_MONITOR || | 
|  | type2 == NL80211_IFTYPE_MONITOR || | 
|  | type1 == NL80211_IFTYPE_P2P_DEVICE || | 
|  | type2 == NL80211_IFTYPE_P2P_DEVICE || | 
|  | (type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_AP_VLAN) || | 
|  | (type1 == NL80211_IFTYPE_AP_VLAN && | 
|  | (type2 == NL80211_IFTYPE_AP || | 
|  | type2 == NL80211_IFTYPE_AP_VLAN)); | 
|  | } | 
|  |  | 
|  | static int ieee80211_check_concurrent_iface(struct ieee80211_sub_if_data *sdata, | 
|  | enum nl80211_iftype iftype) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_sub_if_data *nsdata; | 
|  | int ret; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | /* we hold the RTNL here so can safely walk the list */ | 
|  | list_for_each_entry(nsdata, &local->interfaces, list) { | 
|  | if (nsdata != sdata && ieee80211_sdata_running(nsdata)) { | 
|  | /* | 
|  | * Only OCB and monitor mode may coexist | 
|  | */ | 
|  | if ((sdata->vif.type == NL80211_IFTYPE_OCB && | 
|  | nsdata->vif.type != NL80211_IFTYPE_MONITOR) || | 
|  | (sdata->vif.type != NL80211_IFTYPE_MONITOR && | 
|  | nsdata->vif.type == NL80211_IFTYPE_OCB)) | 
|  | return -EBUSY; | 
|  |  | 
|  | /* | 
|  | * Allow only a single IBSS interface to be up at any | 
|  | * time. This is restricted because beacon distribution | 
|  | * cannot work properly if both are in the same IBSS. | 
|  | * | 
|  | * To remove this restriction we'd have to disallow them | 
|  | * from setting the same SSID on different IBSS interfaces | 
|  | * belonging to the same hardware. Then, however, we're | 
|  | * faced with having to adopt two different TSF timers... | 
|  | */ | 
|  | if (iftype == NL80211_IFTYPE_ADHOC && | 
|  | nsdata->vif.type == NL80211_IFTYPE_ADHOC) | 
|  | return -EBUSY; | 
|  | /* | 
|  | * will not add another interface while any channel | 
|  | * switch is active. | 
|  | */ | 
|  | if (nsdata->vif.bss_conf.csa_active) | 
|  | return -EBUSY; | 
|  |  | 
|  | /* | 
|  | * The remaining checks are only performed for interfaces | 
|  | * with the same MAC address. | 
|  | */ | 
|  | if (!ether_addr_equal(sdata->vif.addr, | 
|  | nsdata->vif.addr)) | 
|  | continue; | 
|  |  | 
|  | /* | 
|  | * check whether it may have the same address | 
|  | */ | 
|  | if (!identical_mac_addr_allowed(iftype, | 
|  | nsdata->vif.type)) | 
|  | return -ENOTUNIQ; | 
|  |  | 
|  | /* No support for VLAN with MLO yet */ | 
|  | if (iftype == NL80211_IFTYPE_AP_VLAN && | 
|  | sdata->wdev.use_4addr && | 
|  | nsdata->vif.type == NL80211_IFTYPE_AP && | 
|  | nsdata->vif.valid_links) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | /* | 
|  | * can only add VLANs to enabled APs | 
|  | */ | 
|  | if (iftype == NL80211_IFTYPE_AP_VLAN && | 
|  | nsdata->vif.type == NL80211_IFTYPE_AP) | 
|  | sdata->bss = &nsdata->u.ap; | 
|  | } | 
|  | } | 
|  |  | 
|  | mutex_lock(&local->chanctx_mtx); | 
|  | ret = ieee80211_check_combinations(sdata, NULL, 0, 0); | 
|  | mutex_unlock(&local->chanctx_mtx); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ieee80211_check_queues(struct ieee80211_sub_if_data *sdata, | 
|  | enum nl80211_iftype iftype) | 
|  | { | 
|  | int n_queues = sdata->local->hw.queues; | 
|  | int i; | 
|  |  | 
|  | if (iftype == NL80211_IFTYPE_NAN) | 
|  | return 0; | 
|  |  | 
|  | if (iftype != NL80211_IFTYPE_P2P_DEVICE) { | 
|  | for (i = 0; i < IEEE80211_NUM_ACS; i++) { | 
|  | if (WARN_ON_ONCE(sdata->vif.hw_queue[i] == | 
|  | IEEE80211_INVAL_HW_QUEUE)) | 
|  | return -EINVAL; | 
|  | if (WARN_ON_ONCE(sdata->vif.hw_queue[i] >= | 
|  | n_queues)) | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  |  | 
|  | if ((iftype != NL80211_IFTYPE_AP && | 
|  | iftype != NL80211_IFTYPE_P2P_GO && | 
|  | iftype != NL80211_IFTYPE_MESH_POINT) || | 
|  | !ieee80211_hw_check(&sdata->local->hw, QUEUE_CONTROL)) { | 
|  | sdata->vif.cab_queue = IEEE80211_INVAL_HW_QUEUE; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (WARN_ON_ONCE(sdata->vif.cab_queue == IEEE80211_INVAL_HW_QUEUE)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (WARN_ON_ONCE(sdata->vif.cab_queue >= n_queues)) | 
|  | return -EINVAL; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ieee80211_open(struct net_device *dev) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | int err; | 
|  |  | 
|  | /* fail early if user set an invalid address */ | 
|  | if (!is_valid_ether_addr(dev->dev_addr)) | 
|  | return -EADDRNOTAVAIL; | 
|  |  | 
|  | err = ieee80211_check_concurrent_iface(sdata, sdata->vif.type); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | wiphy_lock(sdata->local->hw.wiphy); | 
|  | err = ieee80211_do_open(&sdata->wdev, true); | 
|  | wiphy_unlock(sdata->local->hw.wiphy); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, bool going_down) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | unsigned long flags; | 
|  | struct sk_buff *skb, *tmp; | 
|  | u32 hw_reconf_flags = 0; | 
|  | int i, flushed; | 
|  | struct ps_data *ps; | 
|  | struct cfg80211_chan_def chandef; | 
|  | bool cancel_scan; | 
|  | struct cfg80211_nan_func *func; | 
|  |  | 
|  | clear_bit(SDATA_STATE_RUNNING, &sdata->state); | 
|  | synchronize_rcu(); /* flush _ieee80211_wake_txqs() */ | 
|  |  | 
|  | cancel_scan = rcu_access_pointer(local->scan_sdata) == sdata; | 
|  | if (cancel_scan) | 
|  | ieee80211_scan_cancel(local); | 
|  |  | 
|  | /* | 
|  | * Stop TX on this interface first. | 
|  | */ | 
|  | if (!local->ops->wake_tx_queue && sdata->dev) | 
|  | netif_tx_stop_all_queues(sdata->dev); | 
|  |  | 
|  | ieee80211_roc_purge(local, sdata); | 
|  |  | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_STATION: | 
|  | ieee80211_mgd_stop(sdata); | 
|  | break; | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | ieee80211_ibss_stop(sdata); | 
|  | break; | 
|  | case NL80211_IFTYPE_MONITOR: | 
|  | if (sdata->u.mntr.flags & MONITOR_FLAG_COOK_FRAMES) | 
|  | break; | 
|  | list_del_rcu(&sdata->u.mntr.list); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Remove all stations associated with this interface. | 
|  | * | 
|  | * This must be done before calling ops->remove_interface() | 
|  | * because otherwise we can later invoke ops->sta_notify() | 
|  | * whenever the STAs are removed, and that invalidates driver | 
|  | * assumptions about always getting a vif pointer that is valid | 
|  | * (because if we remove a STA after ops->remove_interface() | 
|  | * the driver will have removed the vif info already!) | 
|  | * | 
|  | * For AP_VLANs stations may exist since there's nothing else that | 
|  | * would have removed them, but in other modes there shouldn't | 
|  | * be any stations. | 
|  | */ | 
|  | flushed = sta_info_flush(sdata); | 
|  | WARN_ON_ONCE(sdata->vif.type != NL80211_IFTYPE_AP_VLAN && flushed > 0); | 
|  |  | 
|  | /* don't count this interface for allmulti while it is down */ | 
|  | if (sdata->flags & IEEE80211_SDATA_ALLMULTI) | 
|  | atomic_dec(&local->iff_allmultis); | 
|  |  | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP) { | 
|  | local->fif_pspoll--; | 
|  | local->fif_probe_req--; | 
|  | } else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) { | 
|  | local->fif_probe_req--; | 
|  | } | 
|  |  | 
|  | if (sdata->dev) { | 
|  | netif_addr_lock_bh(sdata->dev); | 
|  | spin_lock_bh(&local->filter_lock); | 
|  | __hw_addr_unsync(&local->mc_list, &sdata->dev->mc, | 
|  | sdata->dev->addr_len); | 
|  | spin_unlock_bh(&local->filter_lock); | 
|  | netif_addr_unlock_bh(sdata->dev); | 
|  | } | 
|  |  | 
|  | del_timer_sync(&local->dynamic_ps_timer); | 
|  | cancel_work_sync(&local->dynamic_ps_enable_work); | 
|  |  | 
|  | cancel_work_sync(&sdata->recalc_smps); | 
|  |  | 
|  | sdata_lock(sdata); | 
|  | WARN(sdata->vif.valid_links, | 
|  | "destroying interface with valid links 0x%04x\n", | 
|  | sdata->vif.valid_links); | 
|  |  | 
|  | mutex_lock(&local->mtx); | 
|  | sdata->vif.bss_conf.csa_active = false; | 
|  | if (sdata->vif.type == NL80211_IFTYPE_STATION) | 
|  | sdata->deflink.u.mgd.csa_waiting_bcn = false; | 
|  | if (sdata->deflink.csa_block_tx) { | 
|  | ieee80211_wake_vif_queues(local, sdata, | 
|  | IEEE80211_QUEUE_STOP_REASON_CSA); | 
|  | sdata->deflink.csa_block_tx = false; | 
|  | } | 
|  | mutex_unlock(&local->mtx); | 
|  | sdata_unlock(sdata); | 
|  |  | 
|  | cancel_work_sync(&sdata->deflink.csa_finalize_work); | 
|  | cancel_work_sync(&sdata->deflink.color_change_finalize_work); | 
|  |  | 
|  | cancel_delayed_work_sync(&sdata->deflink.dfs_cac_timer_work); | 
|  |  | 
|  | if (sdata->wdev.cac_started) { | 
|  | chandef = sdata->vif.bss_conf.chandef; | 
|  | WARN_ON(local->suspended); | 
|  | mutex_lock(&local->mtx); | 
|  | ieee80211_link_release_channel(&sdata->deflink); | 
|  | mutex_unlock(&local->mtx); | 
|  | cfg80211_cac_event(sdata->dev, &chandef, | 
|  | NL80211_RADAR_CAC_ABORTED, | 
|  | GFP_KERNEL); | 
|  | } | 
|  |  | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP) { | 
|  | WARN_ON(!list_empty(&sdata->u.ap.vlans)); | 
|  | } else if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { | 
|  | /* remove all packets in parent bc_buf pointing to this dev */ | 
|  | ps = &sdata->bss->ps; | 
|  |  | 
|  | spin_lock_irqsave(&ps->bc_buf.lock, flags); | 
|  | skb_queue_walk_safe(&ps->bc_buf, skb, tmp) { | 
|  | if (skb->dev == sdata->dev) { | 
|  | __skb_unlink(skb, &ps->bc_buf); | 
|  | local->total_ps_buffered--; | 
|  | ieee80211_free_txskb(&local->hw, skb); | 
|  | } | 
|  | } | 
|  | spin_unlock_irqrestore(&ps->bc_buf.lock, flags); | 
|  | } | 
|  |  | 
|  | if (going_down) | 
|  | local->open_count--; | 
|  |  | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | mutex_lock(&local->mtx); | 
|  | list_del(&sdata->u.vlan.list); | 
|  | mutex_unlock(&local->mtx); | 
|  | RCU_INIT_POINTER(sdata->vif.bss_conf.chanctx_conf, NULL); | 
|  | /* see comment in the default case below */ | 
|  | ieee80211_free_keys(sdata, true); | 
|  | /* no need to tell driver */ | 
|  | break; | 
|  | case NL80211_IFTYPE_MONITOR: | 
|  | if (sdata->u.mntr.flags & MONITOR_FLAG_COOK_FRAMES) { | 
|  | local->cooked_mntrs--; | 
|  | break; | 
|  | } | 
|  |  | 
|  | local->monitors--; | 
|  | if (local->monitors == 0) { | 
|  | local->hw.conf.flags &= ~IEEE80211_CONF_MONITOR; | 
|  | hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR; | 
|  | } | 
|  |  | 
|  | ieee80211_adjust_monitor_flags(sdata, -1); | 
|  | break; | 
|  | case NL80211_IFTYPE_NAN: | 
|  | /* clean all the functions */ | 
|  | spin_lock_bh(&sdata->u.nan.func_lock); | 
|  |  | 
|  | idr_for_each_entry(&sdata->u.nan.function_inst_ids, func, i) { | 
|  | idr_remove(&sdata->u.nan.function_inst_ids, i); | 
|  | cfg80211_free_nan_func(func); | 
|  | } | 
|  | idr_destroy(&sdata->u.nan.function_inst_ids); | 
|  |  | 
|  | spin_unlock_bh(&sdata->u.nan.func_lock); | 
|  | break; | 
|  | case NL80211_IFTYPE_P2P_DEVICE: | 
|  | /* relies on synchronize_rcu() below */ | 
|  | RCU_INIT_POINTER(local->p2p_sdata, NULL); | 
|  | fallthrough; | 
|  | default: | 
|  | cancel_work_sync(&sdata->work); | 
|  | /* | 
|  | * When we get here, the interface is marked down. | 
|  | * Free the remaining keys, if there are any | 
|  | * (which can happen in AP mode if userspace sets | 
|  | * keys before the interface is operating) | 
|  | * | 
|  | * Force the key freeing to always synchronize_net() | 
|  | * to wait for the RX path in case it is using this | 
|  | * interface enqueuing frames at this very time on | 
|  | * another CPU. | 
|  | */ | 
|  | ieee80211_free_keys(sdata, true); | 
|  | skb_queue_purge(&sdata->skb_queue); | 
|  | skb_queue_purge(&sdata->status_queue); | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&local->queue_stop_reason_lock, flags); | 
|  | for (i = 0; i < IEEE80211_MAX_QUEUES; i++) { | 
|  | skb_queue_walk_safe(&local->pending[i], skb, tmp) { | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  | if (info->control.vif == &sdata->vif) { | 
|  | __skb_unlink(skb, &local->pending[i]); | 
|  | ieee80211_free_txskb(&local->hw, skb); | 
|  | } | 
|  | } | 
|  | } | 
|  | spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); | 
|  |  | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | 
|  | ieee80211_txq_remove_vlan(local, sdata); | 
|  |  | 
|  | sdata->bss = NULL; | 
|  |  | 
|  | if (local->open_count == 0) | 
|  | ieee80211_clear_tx_pending(local); | 
|  |  | 
|  | sdata->vif.bss_conf.beacon_int = 0; | 
|  |  | 
|  | /* | 
|  | * If the interface goes down while suspended, presumably because | 
|  | * the device was unplugged and that happens before our resume, | 
|  | * then the driver is already unconfigured and the remainder of | 
|  | * this function isn't needed. | 
|  | * XXX: what about WoWLAN? If the device has software state, e.g. | 
|  | *	memory allocated, it might expect teardown commands from | 
|  | *	mac80211 here? | 
|  | */ | 
|  | if (local->suspended) { | 
|  | WARN_ON(local->wowlan); | 
|  | WARN_ON(rcu_access_pointer(local->monitor_sdata)); | 
|  | return; | 
|  | } | 
|  |  | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | break; | 
|  | case NL80211_IFTYPE_MONITOR: | 
|  | if (local->monitors == 0) | 
|  | ieee80211_del_virtual_monitor(local); | 
|  |  | 
|  | mutex_lock(&local->mtx); | 
|  | ieee80211_recalc_idle(local); | 
|  | mutex_unlock(&local->mtx); | 
|  |  | 
|  | if (!(sdata->u.mntr.flags & MONITOR_FLAG_ACTIVE)) | 
|  | break; | 
|  |  | 
|  | fallthrough; | 
|  | default: | 
|  | if (going_down) | 
|  | drv_remove_interface(local, sdata); | 
|  | } | 
|  |  | 
|  | ieee80211_recalc_ps(local); | 
|  |  | 
|  | if (cancel_scan) | 
|  | wiphy_delayed_work_flush(local->hw.wiphy, &local->scan_work); | 
|  |  | 
|  | if (local->open_count == 0) { | 
|  | ieee80211_stop_device(local); | 
|  |  | 
|  | /* no reconfiguring after stop! */ | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* do after stop to avoid reconfiguring when we stop anyway */ | 
|  | ieee80211_configure_filter(local); | 
|  | ieee80211_hw_config(local, hw_reconf_flags); | 
|  |  | 
|  | if (local->monitors == local->open_count) | 
|  | ieee80211_add_virtual_monitor(local); | 
|  | } | 
|  |  | 
|  | static void ieee80211_stop_mbssid(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_sub_if_data *tx_sdata, *non_tx_sdata, *tmp_sdata; | 
|  | struct ieee80211_vif *tx_vif = sdata->vif.mbssid_tx_vif; | 
|  |  | 
|  | if (!tx_vif) | 
|  | return; | 
|  |  | 
|  | tx_sdata = vif_to_sdata(tx_vif); | 
|  | sdata->vif.mbssid_tx_vif = NULL; | 
|  |  | 
|  | list_for_each_entry_safe(non_tx_sdata, tmp_sdata, | 
|  | &tx_sdata->local->interfaces, list) { | 
|  | if (non_tx_sdata != sdata && non_tx_sdata != tx_sdata && | 
|  | non_tx_sdata->vif.mbssid_tx_vif == tx_vif && | 
|  | ieee80211_sdata_running(non_tx_sdata)) { | 
|  | non_tx_sdata->vif.mbssid_tx_vif = NULL; | 
|  | dev_close(non_tx_sdata->wdev.netdev); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (sdata != tx_sdata && ieee80211_sdata_running(tx_sdata)) { | 
|  | tx_sdata->vif.mbssid_tx_vif = NULL; | 
|  | dev_close(tx_sdata->wdev.netdev); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int ieee80211_stop(struct net_device *dev) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  |  | 
|  | /* close dependent VLAN and MBSSID interfaces before locking wiphy */ | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP) { | 
|  | struct ieee80211_sub_if_data *vlan, *tmpsdata; | 
|  |  | 
|  | list_for_each_entry_safe(vlan, tmpsdata, &sdata->u.ap.vlans, | 
|  | u.vlan.list) | 
|  | dev_close(vlan->dev); | 
|  |  | 
|  | ieee80211_stop_mbssid(sdata); | 
|  | } | 
|  |  | 
|  | cancel_work_sync(&sdata->activate_links_work); | 
|  |  | 
|  | wiphy_lock(sdata->local->hw.wiphy); | 
|  | ieee80211_do_stop(sdata, true); | 
|  | wiphy_unlock(sdata->local->hw.wiphy); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ieee80211_set_multicast_list(struct net_device *dev) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | int allmulti, sdata_allmulti; | 
|  |  | 
|  | allmulti = !!(dev->flags & IFF_ALLMULTI); | 
|  | sdata_allmulti = !!(sdata->flags & IEEE80211_SDATA_ALLMULTI); | 
|  |  | 
|  | if (allmulti != sdata_allmulti) { | 
|  | if (dev->flags & IFF_ALLMULTI) | 
|  | atomic_inc(&local->iff_allmultis); | 
|  | else | 
|  | atomic_dec(&local->iff_allmultis); | 
|  | sdata->flags ^= IEEE80211_SDATA_ALLMULTI; | 
|  | } | 
|  |  | 
|  | spin_lock_bh(&local->filter_lock); | 
|  | __hw_addr_sync(&local->mc_list, &dev->mc, dev->addr_len); | 
|  | spin_unlock_bh(&local->filter_lock); | 
|  | ieee80211_queue_work(&local->hw, &local->reconfig_filter); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Called when the netdev is removed or, by the code below, before | 
|  | * the interface type changes. | 
|  | */ | 
|  | static void ieee80211_teardown_sdata(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | /* free extra data */ | 
|  | ieee80211_free_keys(sdata, false); | 
|  |  | 
|  | ieee80211_debugfs_remove_netdev(sdata); | 
|  |  | 
|  | ieee80211_destroy_frag_cache(&sdata->frags); | 
|  |  | 
|  | if (ieee80211_vif_is_mesh(&sdata->vif)) | 
|  | ieee80211_mesh_teardown_sdata(sdata); | 
|  |  | 
|  | ieee80211_vif_clear_links(sdata); | 
|  | ieee80211_link_stop(&sdata->deflink); | 
|  | } | 
|  |  | 
|  | static void ieee80211_uninit(struct net_device *dev) | 
|  | { | 
|  | ieee80211_teardown_sdata(IEEE80211_DEV_TO_SUB_IF(dev)); | 
|  | } | 
|  |  | 
|  | static u16 ieee80211_netdev_select_queue(struct net_device *dev, | 
|  | struct sk_buff *skb, | 
|  | struct net_device *sb_dev) | 
|  | { | 
|  | return ieee80211_select_queue(IEEE80211_DEV_TO_SUB_IF(dev), skb); | 
|  | } | 
|  |  | 
|  | static void | 
|  | ieee80211_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats) | 
|  | { | 
|  | dev_fetch_sw_netstats(stats, dev->tstats); | 
|  | } | 
|  |  | 
|  | static const struct net_device_ops ieee80211_dataif_ops = { | 
|  | .ndo_open		= ieee80211_open, | 
|  | .ndo_stop		= ieee80211_stop, | 
|  | .ndo_uninit		= ieee80211_uninit, | 
|  | .ndo_start_xmit		= ieee80211_subif_start_xmit, | 
|  | .ndo_set_rx_mode	= ieee80211_set_multicast_list, | 
|  | .ndo_set_mac_address 	= ieee80211_change_mac, | 
|  | .ndo_select_queue	= ieee80211_netdev_select_queue, | 
|  | .ndo_get_stats64	= ieee80211_get_stats64, | 
|  | }; | 
|  |  | 
|  | static u16 ieee80211_monitor_select_queue(struct net_device *dev, | 
|  | struct sk_buff *skb, | 
|  | struct net_device *sb_dev) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  | struct ieee80211_hdr *hdr; | 
|  | int len_rthdr; | 
|  |  | 
|  | if (local->hw.queues < IEEE80211_NUM_ACS) | 
|  | return 0; | 
|  |  | 
|  | /* reset flags and info before parsing radiotap header */ | 
|  | memset(info, 0, sizeof(*info)); | 
|  |  | 
|  | if (!ieee80211_parse_tx_radiotap(skb, dev)) | 
|  | return 0; /* doesn't matter, frame will be dropped */ | 
|  |  | 
|  | len_rthdr = ieee80211_get_radiotap_len(skb->data); | 
|  | hdr = (struct ieee80211_hdr *)(skb->data + len_rthdr); | 
|  | if (skb->len < len_rthdr + 2 || | 
|  | skb->len < len_rthdr + ieee80211_hdrlen(hdr->frame_control)) | 
|  | return 0; /* doesn't matter, frame will be dropped */ | 
|  |  | 
|  | return ieee80211_select_queue_80211(sdata, skb, hdr); | 
|  | } | 
|  |  | 
|  | static const struct net_device_ops ieee80211_monitorif_ops = { | 
|  | .ndo_open		= ieee80211_open, | 
|  | .ndo_stop		= ieee80211_stop, | 
|  | .ndo_uninit		= ieee80211_uninit, | 
|  | .ndo_start_xmit		= ieee80211_monitor_start_xmit, | 
|  | .ndo_set_rx_mode	= ieee80211_set_multicast_list, | 
|  | .ndo_set_mac_address 	= ieee80211_change_mac, | 
|  | .ndo_select_queue	= ieee80211_monitor_select_queue, | 
|  | .ndo_get_stats64	= ieee80211_get_stats64, | 
|  | }; | 
|  |  | 
|  | static int ieee80211_netdev_fill_forward_path(struct net_device_path_ctx *ctx, | 
|  | struct net_device_path *path) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | struct ieee80211_local *local; | 
|  | struct sta_info *sta; | 
|  | int ret = -ENOENT; | 
|  |  | 
|  | sdata = IEEE80211_DEV_TO_SUB_IF(ctx->dev); | 
|  | local = sdata->local; | 
|  |  | 
|  | if (!local->ops->net_fill_forward_path) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | sta = rcu_dereference(sdata->u.vlan.sta); | 
|  | if (sta) | 
|  | break; | 
|  | if (sdata->wdev.use_4addr) | 
|  | goto out; | 
|  | if (is_multicast_ether_addr(ctx->daddr)) | 
|  | goto out; | 
|  | sta = sta_info_get_bss(sdata, ctx->daddr); | 
|  | break; | 
|  | case NL80211_IFTYPE_AP: | 
|  | if (is_multicast_ether_addr(ctx->daddr)) | 
|  | goto out; | 
|  | sta = sta_info_get(sdata, ctx->daddr); | 
|  | break; | 
|  | case NL80211_IFTYPE_STATION: | 
|  | if (sdata->wdev.wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS) { | 
|  | sta = sta_info_get(sdata, ctx->daddr); | 
|  | if (sta && test_sta_flag(sta, WLAN_STA_TDLS_PEER)) { | 
|  | if (!test_sta_flag(sta, WLAN_STA_TDLS_PEER_AUTH)) | 
|  | goto out; | 
|  |  | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | sta = sta_info_get(sdata, sdata->deflink.u.mgd.bssid); | 
|  | break; | 
|  | default: | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (!sta) | 
|  | goto out; | 
|  |  | 
|  | ret = drv_net_fill_forward_path(local, sdata, &sta->sta, ctx, path); | 
|  | out: | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct net_device_ops ieee80211_dataif_8023_ops = { | 
|  | .ndo_open		= ieee80211_open, | 
|  | .ndo_stop		= ieee80211_stop, | 
|  | .ndo_uninit		= ieee80211_uninit, | 
|  | .ndo_start_xmit		= ieee80211_subif_start_xmit_8023, | 
|  | .ndo_set_rx_mode	= ieee80211_set_multicast_list, | 
|  | .ndo_set_mac_address	= ieee80211_change_mac, | 
|  | .ndo_select_queue	= ieee80211_netdev_select_queue, | 
|  | .ndo_get_stats64	= ieee80211_get_stats64, | 
|  | .ndo_fill_forward_path	= ieee80211_netdev_fill_forward_path, | 
|  | }; | 
|  |  | 
|  | static bool ieee80211_iftype_supports_hdr_offload(enum nl80211_iftype iftype) | 
|  | { | 
|  | switch (iftype) { | 
|  | /* P2P GO and client are mapped to AP/STATION types */ | 
|  | case NL80211_IFTYPE_AP: | 
|  | case NL80211_IFTYPE_STATION: | 
|  | return true; | 
|  | default: | 
|  | return false; | 
|  | } | 
|  | } | 
|  |  | 
|  | static bool ieee80211_set_sdata_offload_flags(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | u32 flags; | 
|  |  | 
|  | flags = sdata->vif.offload_flags; | 
|  |  | 
|  | if (ieee80211_hw_check(&local->hw, SUPPORTS_TX_ENCAP_OFFLOAD) && | 
|  | ieee80211_iftype_supports_hdr_offload(sdata->vif.type)) { | 
|  | flags |= IEEE80211_OFFLOAD_ENCAP_ENABLED; | 
|  |  | 
|  | if (!ieee80211_hw_check(&local->hw, SUPPORTS_TX_FRAG) && | 
|  | local->hw.wiphy->frag_threshold != (u32)-1) | 
|  | flags &= ~IEEE80211_OFFLOAD_ENCAP_ENABLED; | 
|  |  | 
|  | if (local->monitors) | 
|  | flags &= ~IEEE80211_OFFLOAD_ENCAP_ENABLED; | 
|  | } else { | 
|  | flags &= ~IEEE80211_OFFLOAD_ENCAP_ENABLED; | 
|  | } | 
|  |  | 
|  | if (ieee80211_hw_check(&local->hw, SUPPORTS_RX_DECAP_OFFLOAD) && | 
|  | ieee80211_iftype_supports_hdr_offload(sdata->vif.type)) { | 
|  | flags |= IEEE80211_OFFLOAD_DECAP_ENABLED; | 
|  |  | 
|  | if (local->monitors && | 
|  | !ieee80211_hw_check(&local->hw, SUPPORTS_CONC_MON_RX_DECAP)) | 
|  | flags &= ~IEEE80211_OFFLOAD_DECAP_ENABLED; | 
|  | } else { | 
|  | flags &= ~IEEE80211_OFFLOAD_DECAP_ENABLED; | 
|  | } | 
|  |  | 
|  | if (sdata->vif.offload_flags == flags) | 
|  | return false; | 
|  |  | 
|  | sdata->vif.offload_flags = flags; | 
|  | ieee80211_check_fast_rx_iface(sdata); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static void ieee80211_set_vif_encap_ops(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_sub_if_data *bss = sdata; | 
|  | bool enabled; | 
|  |  | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { | 
|  | if (!sdata->bss) | 
|  | return; | 
|  |  | 
|  | bss = container_of(sdata->bss, struct ieee80211_sub_if_data, u.ap); | 
|  | } | 
|  |  | 
|  | if (!ieee80211_hw_check(&local->hw, SUPPORTS_TX_ENCAP_OFFLOAD) || | 
|  | !ieee80211_iftype_supports_hdr_offload(bss->vif.type)) | 
|  | return; | 
|  |  | 
|  | enabled = bss->vif.offload_flags & IEEE80211_OFFLOAD_ENCAP_ENABLED; | 
|  | if (sdata->wdev.use_4addr && | 
|  | !(bss->vif.offload_flags & IEEE80211_OFFLOAD_ENCAP_4ADDR)) | 
|  | enabled = false; | 
|  |  | 
|  | sdata->dev->netdev_ops = enabled ? &ieee80211_dataif_8023_ops : | 
|  | &ieee80211_dataif_ops; | 
|  | } | 
|  |  | 
|  | static void ieee80211_recalc_sdata_offload(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct ieee80211_sub_if_data *vsdata; | 
|  |  | 
|  | if (ieee80211_set_sdata_offload_flags(sdata)) { | 
|  | drv_update_vif_offload(local, sdata); | 
|  | ieee80211_set_vif_encap_ops(sdata); | 
|  | } | 
|  |  | 
|  | list_for_each_entry(vsdata, &local->interfaces, list) { | 
|  | if (vsdata->vif.type != NL80211_IFTYPE_AP_VLAN || | 
|  | vsdata->bss != &sdata->u.ap) | 
|  | continue; | 
|  |  | 
|  | ieee80211_set_vif_encap_ops(vsdata); | 
|  | } | 
|  | } | 
|  |  | 
|  | void ieee80211_recalc_offload(struct ieee80211_local *local) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  |  | 
|  | if (!ieee80211_hw_check(&local->hw, SUPPORTS_TX_ENCAP_OFFLOAD)) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&local->iflist_mtx); | 
|  |  | 
|  | list_for_each_entry(sdata, &local->interfaces, list) { | 
|  | if (!ieee80211_sdata_running(sdata)) | 
|  | continue; | 
|  |  | 
|  | ieee80211_recalc_sdata_offload(sdata); | 
|  | } | 
|  |  | 
|  | mutex_unlock(&local->iflist_mtx); | 
|  | } | 
|  |  | 
|  | void ieee80211_adjust_monitor_flags(struct ieee80211_sub_if_data *sdata, | 
|  | const int offset) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | u32 flags = sdata->u.mntr.flags; | 
|  |  | 
|  | #define ADJUST(_f, _s)	do {					\ | 
|  | if (flags & MONITOR_FLAG_##_f)				\ | 
|  | local->fif_##_s += offset;			\ | 
|  | } while (0) | 
|  |  | 
|  | ADJUST(FCSFAIL, fcsfail); | 
|  | ADJUST(PLCPFAIL, plcpfail); | 
|  | ADJUST(CONTROL, control); | 
|  | ADJUST(CONTROL, pspoll); | 
|  | ADJUST(OTHER_BSS, other_bss); | 
|  |  | 
|  | #undef ADJUST | 
|  | } | 
|  |  | 
|  | static void ieee80211_set_default_queues(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < IEEE80211_NUM_ACS; i++) { | 
|  | if (ieee80211_hw_check(&local->hw, QUEUE_CONTROL)) | 
|  | sdata->vif.hw_queue[i] = IEEE80211_INVAL_HW_QUEUE; | 
|  | else if (local->hw.queues >= IEEE80211_NUM_ACS) | 
|  | sdata->vif.hw_queue[i] = i; | 
|  | else | 
|  | sdata->vif.hw_queue[i] = 0; | 
|  | } | 
|  | sdata->vif.cab_queue = IEEE80211_INVAL_HW_QUEUE; | 
|  | } | 
|  |  | 
|  | static void ieee80211_sdata_init(struct ieee80211_local *local, | 
|  | struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | sdata->local = local; | 
|  |  | 
|  | /* | 
|  | * Initialize the default link, so we can use link_id 0 for non-MLD, | 
|  | * and that continues to work for non-MLD-aware drivers that use just | 
|  | * vif.bss_conf instead of vif.link_conf. | 
|  | * | 
|  | * Note that we never change this, so if link ID 0 isn't used in an | 
|  | * MLD connection, we get a separate allocation for it. | 
|  | */ | 
|  | ieee80211_link_init(sdata, -1, &sdata->deflink, &sdata->vif.bss_conf); | 
|  | } | 
|  |  | 
|  | int ieee80211_add_virtual_monitor(struct ieee80211_local *local) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | int ret; | 
|  |  | 
|  | if (!ieee80211_hw_check(&local->hw, WANT_MONITOR_VIF)) | 
|  | return 0; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  | lockdep_assert_wiphy(local->hw.wiphy); | 
|  |  | 
|  | if (local->monitor_sdata) | 
|  | return 0; | 
|  |  | 
|  | sdata = kzalloc(sizeof(*sdata) + local->hw.vif_data_size, GFP_KERNEL); | 
|  | if (!sdata) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* set up data */ | 
|  | sdata->vif.type = NL80211_IFTYPE_MONITOR; | 
|  | snprintf(sdata->name, IFNAMSIZ, "%s-monitor", | 
|  | wiphy_name(local->hw.wiphy)); | 
|  | sdata->wdev.iftype = NL80211_IFTYPE_MONITOR; | 
|  |  | 
|  | ieee80211_sdata_init(local, sdata); | 
|  |  | 
|  | ieee80211_set_default_queues(sdata); | 
|  |  | 
|  | ret = drv_add_interface(local, sdata); | 
|  | if (WARN_ON(ret)) { | 
|  | /* ok .. stupid driver, it asked for this! */ | 
|  | kfree(sdata); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | set_bit(SDATA_STATE_RUNNING, &sdata->state); | 
|  |  | 
|  | ret = ieee80211_check_queues(sdata, NL80211_IFTYPE_MONITOR); | 
|  | if (ret) { | 
|  | kfree(sdata); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | mutex_lock(&local->iflist_mtx); | 
|  | rcu_assign_pointer(local->monitor_sdata, sdata); | 
|  | mutex_unlock(&local->iflist_mtx); | 
|  |  | 
|  | mutex_lock(&local->mtx); | 
|  | ret = ieee80211_link_use_channel(&sdata->deflink, &local->monitor_chandef, | 
|  | IEEE80211_CHANCTX_EXCLUSIVE); | 
|  | mutex_unlock(&local->mtx); | 
|  | if (ret) { | 
|  | mutex_lock(&local->iflist_mtx); | 
|  | RCU_INIT_POINTER(local->monitor_sdata, NULL); | 
|  | mutex_unlock(&local->iflist_mtx); | 
|  | synchronize_net(); | 
|  | drv_remove_interface(local, sdata); | 
|  | kfree(sdata); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | skb_queue_head_init(&sdata->skb_queue); | 
|  | skb_queue_head_init(&sdata->status_queue); | 
|  | INIT_WORK(&sdata->work, ieee80211_iface_work); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void ieee80211_del_virtual_monitor(struct ieee80211_local *local) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  |  | 
|  | if (!ieee80211_hw_check(&local->hw, WANT_MONITOR_VIF)) | 
|  | return; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  | lockdep_assert_wiphy(local->hw.wiphy); | 
|  |  | 
|  | mutex_lock(&local->iflist_mtx); | 
|  |  | 
|  | sdata = rcu_dereference_protected(local->monitor_sdata, | 
|  | lockdep_is_held(&local->iflist_mtx)); | 
|  | if (!sdata) { | 
|  | mutex_unlock(&local->iflist_mtx); | 
|  | return; | 
|  | } | 
|  |  | 
|  | RCU_INIT_POINTER(local->monitor_sdata, NULL); | 
|  | mutex_unlock(&local->iflist_mtx); | 
|  |  | 
|  | synchronize_net(); | 
|  |  | 
|  | mutex_lock(&local->mtx); | 
|  | ieee80211_link_release_channel(&sdata->deflink); | 
|  | mutex_unlock(&local->mtx); | 
|  |  | 
|  | drv_remove_interface(local, sdata); | 
|  |  | 
|  | kfree(sdata); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * NOTE: Be very careful when changing this function, it must NOT return | 
|  | * an error on interface type changes that have been pre-checked, so most | 
|  | * checks should be in ieee80211_check_concurrent_iface. | 
|  | */ | 
|  | int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); | 
|  | struct net_device *dev = wdev->netdev; | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | u32 changed = 0; | 
|  | int res; | 
|  | u32 hw_reconf_flags = 0; | 
|  |  | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_AP_VLAN: { | 
|  | struct ieee80211_sub_if_data *master; | 
|  |  | 
|  | if (!sdata->bss) | 
|  | return -ENOLINK; | 
|  |  | 
|  | mutex_lock(&local->mtx); | 
|  | list_add(&sdata->u.vlan.list, &sdata->bss->vlans); | 
|  | mutex_unlock(&local->mtx); | 
|  |  | 
|  | master = container_of(sdata->bss, | 
|  | struct ieee80211_sub_if_data, u.ap); | 
|  | sdata->control_port_protocol = | 
|  | master->control_port_protocol; | 
|  | sdata->control_port_no_encrypt = | 
|  | master->control_port_no_encrypt; | 
|  | sdata->control_port_over_nl80211 = | 
|  | master->control_port_over_nl80211; | 
|  | sdata->control_port_no_preauth = | 
|  | master->control_port_no_preauth; | 
|  | sdata->vif.cab_queue = master->vif.cab_queue; | 
|  | memcpy(sdata->vif.hw_queue, master->vif.hw_queue, | 
|  | sizeof(sdata->vif.hw_queue)); | 
|  | sdata->vif.bss_conf.chandef = master->vif.bss_conf.chandef; | 
|  |  | 
|  | mutex_lock(&local->key_mtx); | 
|  | sdata->crypto_tx_tailroom_needed_cnt += | 
|  | master->crypto_tx_tailroom_needed_cnt; | 
|  | mutex_unlock(&local->key_mtx); | 
|  |  | 
|  | break; | 
|  | } | 
|  | case NL80211_IFTYPE_AP: | 
|  | sdata->bss = &sdata->u.ap; | 
|  | break; | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | case NL80211_IFTYPE_STATION: | 
|  | case NL80211_IFTYPE_MONITOR: | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | case NL80211_IFTYPE_P2P_DEVICE: | 
|  | case NL80211_IFTYPE_OCB: | 
|  | case NL80211_IFTYPE_NAN: | 
|  | /* no special treatment */ | 
|  | break; | 
|  | case NL80211_IFTYPE_UNSPECIFIED: | 
|  | case NUM_NL80211_IFTYPES: | 
|  | case NL80211_IFTYPE_P2P_CLIENT: | 
|  | case NL80211_IFTYPE_P2P_GO: | 
|  | case NL80211_IFTYPE_WDS: | 
|  | /* cannot happen */ | 
|  | WARN_ON(1); | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (local->open_count == 0) { | 
|  | res = drv_start(local); | 
|  | if (res) | 
|  | goto err_del_bss; | 
|  | /* we're brought up, everything changes */ | 
|  | hw_reconf_flags = ~0; | 
|  | ieee80211_led_radio(local, true); | 
|  | ieee80211_mod_tpt_led_trig(local, | 
|  | IEEE80211_TPT_LEDTRIG_FL_RADIO, 0); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Copy the hopefully now-present MAC address to | 
|  | * this interface, if it has the special null one. | 
|  | */ | 
|  | if (dev && is_zero_ether_addr(dev->dev_addr)) { | 
|  | eth_hw_addr_set(dev, local->hw.wiphy->perm_addr); | 
|  | memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN); | 
|  |  | 
|  | if (!is_valid_ether_addr(dev->dev_addr)) { | 
|  | res = -EADDRNOTAVAIL; | 
|  | goto err_stop; | 
|  | } | 
|  | } | 
|  |  | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | /* no need to tell driver, but set carrier and chanctx */ | 
|  | if (sdata->bss->active) { | 
|  | ieee80211_link_vlan_copy_chanctx(&sdata->deflink); | 
|  | netif_carrier_on(dev); | 
|  | ieee80211_set_vif_encap_ops(sdata); | 
|  | } else { | 
|  | netif_carrier_off(dev); | 
|  | } | 
|  | break; | 
|  | case NL80211_IFTYPE_MONITOR: | 
|  | if (sdata->u.mntr.flags & MONITOR_FLAG_COOK_FRAMES) { | 
|  | local->cooked_mntrs++; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (sdata->u.mntr.flags & MONITOR_FLAG_ACTIVE) { | 
|  | res = drv_add_interface(local, sdata); | 
|  | if (res) | 
|  | goto err_stop; | 
|  | } else if (local->monitors == 0 && local->open_count == 0) { | 
|  | res = ieee80211_add_virtual_monitor(local); | 
|  | if (res) | 
|  | goto err_stop; | 
|  | } | 
|  |  | 
|  | /* must be before the call to ieee80211_configure_filter */ | 
|  | local->monitors++; | 
|  | if (local->monitors == 1) { | 
|  | local->hw.conf.flags |= IEEE80211_CONF_MONITOR; | 
|  | hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR; | 
|  | } | 
|  |  | 
|  | ieee80211_adjust_monitor_flags(sdata, 1); | 
|  | ieee80211_configure_filter(local); | 
|  | ieee80211_recalc_offload(local); | 
|  | mutex_lock(&local->mtx); | 
|  | ieee80211_recalc_idle(local); | 
|  | mutex_unlock(&local->mtx); | 
|  |  | 
|  | netif_carrier_on(dev); | 
|  | break; | 
|  | default: | 
|  | if (coming_up) { | 
|  | ieee80211_del_virtual_monitor(local); | 
|  | ieee80211_set_sdata_offload_flags(sdata); | 
|  |  | 
|  | res = drv_add_interface(local, sdata); | 
|  | if (res) | 
|  | goto err_stop; | 
|  |  | 
|  | ieee80211_set_vif_encap_ops(sdata); | 
|  | res = ieee80211_check_queues(sdata, | 
|  | ieee80211_vif_type_p2p(&sdata->vif)); | 
|  | if (res) | 
|  | goto err_del_interface; | 
|  | } | 
|  |  | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP) { | 
|  | local->fif_pspoll++; | 
|  | local->fif_probe_req++; | 
|  |  | 
|  | ieee80211_configure_filter(local); | 
|  | } else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) { | 
|  | local->fif_probe_req++; | 
|  | } | 
|  |  | 
|  | if (sdata->vif.probe_req_reg) | 
|  | drv_config_iface_filter(local, sdata, | 
|  | FIF_PROBE_REQ, | 
|  | FIF_PROBE_REQ); | 
|  |  | 
|  | if (sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE && | 
|  | sdata->vif.type != NL80211_IFTYPE_NAN) | 
|  | changed |= ieee80211_reset_erp_info(sdata); | 
|  | ieee80211_link_info_change_notify(sdata, &sdata->deflink, | 
|  | changed); | 
|  |  | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_STATION: | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | case NL80211_IFTYPE_AP: | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | case NL80211_IFTYPE_OCB: | 
|  | netif_carrier_off(dev); | 
|  | break; | 
|  | case NL80211_IFTYPE_P2P_DEVICE: | 
|  | case NL80211_IFTYPE_NAN: | 
|  | break; | 
|  | default: | 
|  | /* not reached */ | 
|  | WARN_ON(1); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Set default queue parameters so drivers don't | 
|  | * need to initialise the hardware if the hardware | 
|  | * doesn't start up with sane defaults. | 
|  | * Enable QoS for anything but station interfaces. | 
|  | */ | 
|  | ieee80211_set_wmm_default(&sdata->deflink, true, | 
|  | sdata->vif.type != NL80211_IFTYPE_STATION); | 
|  | } | 
|  |  | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_P2P_DEVICE: | 
|  | rcu_assign_pointer(local->p2p_sdata, sdata); | 
|  | break; | 
|  | case NL80211_IFTYPE_MONITOR: | 
|  | if (sdata->u.mntr.flags & MONITOR_FLAG_COOK_FRAMES) | 
|  | break; | 
|  | list_add_tail_rcu(&sdata->u.mntr.list, &local->mon_list); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * set_multicast_list will be invoked by the networking core | 
|  | * which will check whether any increments here were done in | 
|  | * error and sync them down to the hardware as filter flags. | 
|  | */ | 
|  | if (sdata->flags & IEEE80211_SDATA_ALLMULTI) | 
|  | atomic_inc(&local->iff_allmultis); | 
|  |  | 
|  | if (coming_up) | 
|  | local->open_count++; | 
|  |  | 
|  | if (hw_reconf_flags) | 
|  | ieee80211_hw_config(local, hw_reconf_flags); | 
|  |  | 
|  | ieee80211_recalc_ps(local); | 
|  |  | 
|  | if (sdata->vif.type == NL80211_IFTYPE_MONITOR || | 
|  | sdata->vif.type == NL80211_IFTYPE_AP_VLAN || | 
|  | local->ops->wake_tx_queue) { | 
|  | /* XXX: for AP_VLAN, actually track AP queues */ | 
|  | if (dev) | 
|  | netif_tx_start_all_queues(dev); | 
|  | } else if (dev) { | 
|  | unsigned long flags; | 
|  | int n_acs = IEEE80211_NUM_ACS; | 
|  | int ac; | 
|  |  | 
|  | if (local->hw.queues < IEEE80211_NUM_ACS) | 
|  | n_acs = 1; | 
|  |  | 
|  | spin_lock_irqsave(&local->queue_stop_reason_lock, flags); | 
|  | if (sdata->vif.cab_queue == IEEE80211_INVAL_HW_QUEUE || | 
|  | (local->queue_stop_reasons[sdata->vif.cab_queue] == 0 && | 
|  | skb_queue_empty(&local->pending[sdata->vif.cab_queue]))) { | 
|  | for (ac = 0; ac < n_acs; ac++) { | 
|  | int ac_queue = sdata->vif.hw_queue[ac]; | 
|  |  | 
|  | if (local->queue_stop_reasons[ac_queue] == 0 && | 
|  | skb_queue_empty(&local->pending[ac_queue])) | 
|  | netif_start_subqueue(dev, ac); | 
|  | } | 
|  | } | 
|  | spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); | 
|  | } | 
|  |  | 
|  | set_bit(SDATA_STATE_RUNNING, &sdata->state); | 
|  |  | 
|  | return 0; | 
|  | err_del_interface: | 
|  | drv_remove_interface(local, sdata); | 
|  | err_stop: | 
|  | if (!local->open_count) | 
|  | drv_stop(local); | 
|  | err_del_bss: | 
|  | sdata->bss = NULL; | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { | 
|  | mutex_lock(&local->mtx); | 
|  | list_del(&sdata->u.vlan.list); | 
|  | mutex_unlock(&local->mtx); | 
|  | } | 
|  | /* might already be clear but that doesn't matter */ | 
|  | clear_bit(SDATA_STATE_RUNNING, &sdata->state); | 
|  | return res; | 
|  | } | 
|  |  | 
|  | static void ieee80211_if_free(struct net_device *dev) | 
|  | { | 
|  | free_percpu(dev->tstats); | 
|  | } | 
|  |  | 
|  | static void ieee80211_if_setup(struct net_device *dev) | 
|  | { | 
|  | ether_setup(dev); | 
|  | dev->priv_flags &= ~IFF_TX_SKB_SHARING; | 
|  | dev->netdev_ops = &ieee80211_dataif_ops; | 
|  | dev->needs_free_netdev = true; | 
|  | dev->priv_destructor = ieee80211_if_free; | 
|  | } | 
|  |  | 
|  | static void ieee80211_if_setup_no_queue(struct net_device *dev) | 
|  | { | 
|  | ieee80211_if_setup(dev); | 
|  | dev->priv_flags |= IFF_NO_QUEUE; | 
|  | } | 
|  |  | 
|  | static void ieee80211_iface_process_skb(struct ieee80211_local *local, | 
|  | struct ieee80211_sub_if_data *sdata, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_mgmt *mgmt = (void *)skb->data; | 
|  |  | 
|  | if (ieee80211_is_action(mgmt->frame_control) && | 
|  | mgmt->u.action.category == WLAN_CATEGORY_BACK) { | 
|  | struct sta_info *sta; | 
|  | int len = skb->len; | 
|  |  | 
|  | mutex_lock(&local->sta_mtx); | 
|  | sta = sta_info_get_bss(sdata, mgmt->sa); | 
|  | if (sta) { | 
|  | switch (mgmt->u.action.u.addba_req.action_code) { | 
|  | case WLAN_ACTION_ADDBA_REQ: | 
|  | ieee80211_process_addba_request(local, sta, | 
|  | mgmt, len); | 
|  | break; | 
|  | case WLAN_ACTION_ADDBA_RESP: | 
|  | ieee80211_process_addba_resp(local, sta, | 
|  | mgmt, len); | 
|  | break; | 
|  | case WLAN_ACTION_DELBA: | 
|  | ieee80211_process_delba(sdata, sta, | 
|  | mgmt, len); | 
|  | break; | 
|  | default: | 
|  | WARN_ON(1); | 
|  | break; | 
|  | } | 
|  | } | 
|  | mutex_unlock(&local->sta_mtx); | 
|  | } else if (ieee80211_is_action(mgmt->frame_control) && | 
|  | mgmt->u.action.category == WLAN_CATEGORY_VHT) { | 
|  | switch (mgmt->u.action.u.vht_group_notif.action_code) { | 
|  | case WLAN_VHT_ACTION_OPMODE_NOTIF: { | 
|  | struct ieee80211_rx_status *status; | 
|  | enum nl80211_band band; | 
|  | struct sta_info *sta; | 
|  | u8 opmode; | 
|  |  | 
|  | status = IEEE80211_SKB_RXCB(skb); | 
|  | band = status->band; | 
|  | opmode = mgmt->u.action.u.vht_opmode_notif.operating_mode; | 
|  |  | 
|  | mutex_lock(&local->sta_mtx); | 
|  | sta = sta_info_get_bss(sdata, mgmt->sa); | 
|  |  | 
|  | if (sta) | 
|  | ieee80211_vht_handle_opmode(sdata, | 
|  | &sta->deflink, | 
|  | opmode, band); | 
|  |  | 
|  | mutex_unlock(&local->sta_mtx); | 
|  | break; | 
|  | } | 
|  | case WLAN_VHT_ACTION_GROUPID_MGMT: | 
|  | ieee80211_process_mu_groups(sdata, &sdata->deflink, | 
|  | mgmt); | 
|  | break; | 
|  | default: | 
|  | WARN_ON(1); | 
|  | break; | 
|  | } | 
|  | } else if (ieee80211_is_action(mgmt->frame_control) && | 
|  | mgmt->u.action.category == WLAN_CATEGORY_S1G) { | 
|  | switch (mgmt->u.action.u.s1g.action_code) { | 
|  | case WLAN_S1G_TWT_TEARDOWN: | 
|  | case WLAN_S1G_TWT_SETUP: | 
|  | ieee80211_s1g_rx_twt_action(sdata, skb); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } else if (ieee80211_is_ext(mgmt->frame_control)) { | 
|  | if (sdata->vif.type == NL80211_IFTYPE_STATION) | 
|  | ieee80211_sta_rx_queued_ext(sdata, skb); | 
|  | else | 
|  | WARN_ON(1); | 
|  | } else if (ieee80211_is_data_qos(mgmt->frame_control)) { | 
|  | struct ieee80211_hdr *hdr = (void *)mgmt; | 
|  | struct sta_info *sta; | 
|  |  | 
|  | /* | 
|  | * So the frame isn't mgmt, but frame_control | 
|  | * is at the right place anyway, of course, so | 
|  | * the if statement is correct. | 
|  | * | 
|  | * Warn if we have other data frame types here, | 
|  | * they must not get here. | 
|  | */ | 
|  | WARN_ON(hdr->frame_control & | 
|  | cpu_to_le16(IEEE80211_STYPE_NULLFUNC)); | 
|  | WARN_ON(!(hdr->seq_ctrl & | 
|  | cpu_to_le16(IEEE80211_SCTL_FRAG))); | 
|  | /* | 
|  | * This was a fragment of a frame, received while | 
|  | * a block-ack session was active. That cannot be | 
|  | * right, so terminate the session. | 
|  | */ | 
|  | mutex_lock(&local->sta_mtx); | 
|  | sta = sta_info_get_bss(sdata, mgmt->sa); | 
|  | if (sta) { | 
|  | u16 tid = ieee80211_get_tid(hdr); | 
|  |  | 
|  | __ieee80211_stop_rx_ba_session( | 
|  | sta, tid, WLAN_BACK_RECIPIENT, | 
|  | WLAN_REASON_QSTA_REQUIRE_SETUP, | 
|  | true); | 
|  | } | 
|  | mutex_unlock(&local->sta_mtx); | 
|  | } else switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_STATION: | 
|  | ieee80211_sta_rx_queued_mgmt(sdata, skb); | 
|  | break; | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | ieee80211_ibss_rx_queued_mgmt(sdata, skb); | 
|  | break; | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | if (!ieee80211_vif_is_mesh(&sdata->vif)) | 
|  | break; | 
|  | ieee80211_mesh_rx_queued_mgmt(sdata, skb); | 
|  | break; | 
|  | default: | 
|  | WARN(1, "frame for unexpected interface type"); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ieee80211_iface_process_status(struct ieee80211_sub_if_data *sdata, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_mgmt *mgmt = (void *)skb->data; | 
|  |  | 
|  | if (ieee80211_is_action(mgmt->frame_control) && | 
|  | mgmt->u.action.category == WLAN_CATEGORY_S1G) { | 
|  | switch (mgmt->u.action.u.s1g.action_code) { | 
|  | case WLAN_S1G_TWT_TEARDOWN: | 
|  | case WLAN_S1G_TWT_SETUP: | 
|  | ieee80211_s1g_status_twt_action(sdata, skb); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ieee80211_iface_work(struct work_struct *work) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = | 
|  | container_of(work, struct ieee80211_sub_if_data, work); | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | if (!ieee80211_sdata_running(sdata)) | 
|  | return; | 
|  |  | 
|  | if (test_bit(SCAN_SW_SCANNING, &local->scanning)) | 
|  | return; | 
|  |  | 
|  | if (!ieee80211_can_run_worker(local)) | 
|  | return; | 
|  |  | 
|  | /* first process frames */ | 
|  | while ((skb = skb_dequeue(&sdata->skb_queue))) { | 
|  | kcov_remote_start_common(skb_get_kcov_handle(skb)); | 
|  |  | 
|  | if (skb->protocol == cpu_to_be16(ETH_P_TDLS)) | 
|  | ieee80211_process_tdls_channel_switch(sdata, skb); | 
|  | else | 
|  | ieee80211_iface_process_skb(local, sdata, skb); | 
|  |  | 
|  | kfree_skb(skb); | 
|  | kcov_remote_stop(); | 
|  | } | 
|  |  | 
|  | /* process status queue */ | 
|  | while ((skb = skb_dequeue(&sdata->status_queue))) { | 
|  | kcov_remote_start_common(skb_get_kcov_handle(skb)); | 
|  |  | 
|  | ieee80211_iface_process_status(sdata, skb); | 
|  | kfree_skb(skb); | 
|  |  | 
|  | kcov_remote_stop(); | 
|  | } | 
|  |  | 
|  | /* then other type-dependent work */ | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_STATION: | 
|  | ieee80211_sta_work(sdata); | 
|  | break; | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | ieee80211_ibss_work(sdata); | 
|  | break; | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | if (!ieee80211_vif_is_mesh(&sdata->vif)) | 
|  | break; | 
|  | ieee80211_mesh_work(sdata); | 
|  | break; | 
|  | case NL80211_IFTYPE_OCB: | 
|  | ieee80211_ocb_work(sdata); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ieee80211_recalc_smps_work(struct work_struct *work) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = | 
|  | container_of(work, struct ieee80211_sub_if_data, recalc_smps); | 
|  |  | 
|  | ieee80211_recalc_smps(sdata, &sdata->deflink); | 
|  | } | 
|  |  | 
|  | static void ieee80211_activate_links_work(struct work_struct *work) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata = | 
|  | container_of(work, struct ieee80211_sub_if_data, | 
|  | activate_links_work); | 
|  |  | 
|  | ieee80211_set_active_links(&sdata->vif, sdata->desired_active_links); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Helper function to initialise an interface to a specific type. | 
|  | */ | 
|  | static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata, | 
|  | enum nl80211_iftype type) | 
|  | { | 
|  | static const u8 bssid_wildcard[ETH_ALEN] = {0xff, 0xff, 0xff, | 
|  | 0xff, 0xff, 0xff}; | 
|  |  | 
|  | /* clear type-dependent unions */ | 
|  | memset(&sdata->u, 0, sizeof(sdata->u)); | 
|  | memset(&sdata->deflink.u, 0, sizeof(sdata->deflink.u)); | 
|  |  | 
|  | /* and set some type-dependent values */ | 
|  | sdata->vif.type = type; | 
|  | sdata->vif.p2p = false; | 
|  | sdata->wdev.iftype = type; | 
|  |  | 
|  | sdata->control_port_protocol = cpu_to_be16(ETH_P_PAE); | 
|  | sdata->control_port_no_encrypt = false; | 
|  | sdata->control_port_over_nl80211 = false; | 
|  | sdata->control_port_no_preauth = false; | 
|  | sdata->vif.cfg.idle = true; | 
|  | sdata->vif.bss_conf.txpower = INT_MIN; /* unset */ | 
|  |  | 
|  | sdata->noack_map = 0; | 
|  |  | 
|  | /* only monitor/p2p-device differ */ | 
|  | if (sdata->dev) { | 
|  | sdata->dev->netdev_ops = &ieee80211_dataif_ops; | 
|  | sdata->dev->type = ARPHRD_ETHER; | 
|  | } | 
|  |  | 
|  | skb_queue_head_init(&sdata->skb_queue); | 
|  | skb_queue_head_init(&sdata->status_queue); | 
|  | INIT_WORK(&sdata->work, ieee80211_iface_work); | 
|  | INIT_WORK(&sdata->recalc_smps, ieee80211_recalc_smps_work); | 
|  | INIT_WORK(&sdata->activate_links_work, ieee80211_activate_links_work); | 
|  |  | 
|  | switch (type) { | 
|  | case NL80211_IFTYPE_P2P_GO: | 
|  | type = NL80211_IFTYPE_AP; | 
|  | sdata->vif.type = type; | 
|  | sdata->vif.p2p = true; | 
|  | fallthrough; | 
|  | case NL80211_IFTYPE_AP: | 
|  | skb_queue_head_init(&sdata->u.ap.ps.bc_buf); | 
|  | INIT_LIST_HEAD(&sdata->u.ap.vlans); | 
|  | sdata->vif.bss_conf.bssid = sdata->vif.addr; | 
|  | break; | 
|  | case NL80211_IFTYPE_P2P_CLIENT: | 
|  | type = NL80211_IFTYPE_STATION; | 
|  | sdata->vif.type = type; | 
|  | sdata->vif.p2p = true; | 
|  | fallthrough; | 
|  | case NL80211_IFTYPE_STATION: | 
|  | sdata->vif.bss_conf.bssid = sdata->deflink.u.mgd.bssid; | 
|  | ieee80211_sta_setup_sdata(sdata); | 
|  | break; | 
|  | case NL80211_IFTYPE_OCB: | 
|  | sdata->vif.bss_conf.bssid = bssid_wildcard; | 
|  | ieee80211_ocb_setup_sdata(sdata); | 
|  | break; | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | sdata->vif.bss_conf.bssid = sdata->u.ibss.bssid; | 
|  | ieee80211_ibss_setup_sdata(sdata); | 
|  | break; | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | if (ieee80211_vif_is_mesh(&sdata->vif)) | 
|  | ieee80211_mesh_init_sdata(sdata); | 
|  | break; | 
|  | case NL80211_IFTYPE_MONITOR: | 
|  | sdata->dev->type = ARPHRD_IEEE80211_RADIOTAP; | 
|  | sdata->dev->netdev_ops = &ieee80211_monitorif_ops; | 
|  | sdata->u.mntr.flags = MONITOR_FLAG_CONTROL | | 
|  | MONITOR_FLAG_OTHER_BSS; | 
|  | break; | 
|  | case NL80211_IFTYPE_NAN: | 
|  | idr_init(&sdata->u.nan.function_inst_ids); | 
|  | spin_lock_init(&sdata->u.nan.func_lock); | 
|  | sdata->vif.bss_conf.bssid = sdata->vif.addr; | 
|  | break; | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | case NL80211_IFTYPE_P2P_DEVICE: | 
|  | sdata->vif.bss_conf.bssid = sdata->vif.addr; | 
|  | break; | 
|  | case NL80211_IFTYPE_UNSPECIFIED: | 
|  | case NL80211_IFTYPE_WDS: | 
|  | case NUM_NL80211_IFTYPES: | 
|  | WARN_ON(1); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* need to do this after the switch so vif.type is correct */ | 
|  | ieee80211_link_setup(&sdata->deflink); | 
|  |  | 
|  | ieee80211_debugfs_add_netdev(sdata); | 
|  | } | 
|  |  | 
|  | static int ieee80211_runtime_change_iftype(struct ieee80211_sub_if_data *sdata, | 
|  | enum nl80211_iftype type) | 
|  | { | 
|  | struct ieee80211_local *local = sdata->local; | 
|  | int ret, err; | 
|  | enum nl80211_iftype internal_type = type; | 
|  | bool p2p = false; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | if (!local->ops->change_interface) | 
|  | return -EBUSY; | 
|  |  | 
|  | /* for now, don't support changing while links exist */ | 
|  | if (sdata->vif.valid_links) | 
|  | return -EBUSY; | 
|  |  | 
|  | switch (sdata->vif.type) { | 
|  | case NL80211_IFTYPE_AP: | 
|  | if (!list_empty(&sdata->u.ap.vlans)) | 
|  | return -EBUSY; | 
|  | break; | 
|  | case NL80211_IFTYPE_STATION: | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | case NL80211_IFTYPE_OCB: | 
|  | /* | 
|  | * Could maybe also all others here? | 
|  | * Just not sure how that interacts | 
|  | * with the RX/config path e.g. for | 
|  | * mesh. | 
|  | */ | 
|  | break; | 
|  | default: | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | switch (type) { | 
|  | case NL80211_IFTYPE_AP: | 
|  | case NL80211_IFTYPE_STATION: | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | case NL80211_IFTYPE_OCB: | 
|  | /* | 
|  | * Could probably support everything | 
|  | * but here. | 
|  | */ | 
|  | break; | 
|  | case NL80211_IFTYPE_P2P_CLIENT: | 
|  | p2p = true; | 
|  | internal_type = NL80211_IFTYPE_STATION; | 
|  | break; | 
|  | case NL80211_IFTYPE_P2P_GO: | 
|  | p2p = true; | 
|  | internal_type = NL80211_IFTYPE_AP; | 
|  | break; | 
|  | default: | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | ret = ieee80211_check_concurrent_iface(sdata, internal_type); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ieee80211_stop_vif_queues(local, sdata, | 
|  | IEEE80211_QUEUE_STOP_REASON_IFTYPE_CHANGE); | 
|  | synchronize_net(); | 
|  |  | 
|  | ieee80211_do_stop(sdata, false); | 
|  |  | 
|  | ieee80211_teardown_sdata(sdata); | 
|  |  | 
|  | ieee80211_set_sdata_offload_flags(sdata); | 
|  | ret = drv_change_interface(local, sdata, internal_type, p2p); | 
|  | if (ret) | 
|  | type = ieee80211_vif_type_p2p(&sdata->vif); | 
|  |  | 
|  | /* | 
|  | * Ignore return value here, there's not much we can do since | 
|  | * the driver changed the interface type internally already. | 
|  | * The warnings will hopefully make driver authors fix it :-) | 
|  | */ | 
|  | ieee80211_check_queues(sdata, type); | 
|  |  | 
|  | ieee80211_setup_sdata(sdata, type); | 
|  | ieee80211_set_vif_encap_ops(sdata); | 
|  |  | 
|  | err = ieee80211_do_open(&sdata->wdev, false); | 
|  | WARN(err, "type change: do_open returned %d", err); | 
|  |  | 
|  | ieee80211_wake_vif_queues(local, sdata, | 
|  | IEEE80211_QUEUE_STOP_REASON_IFTYPE_CHANGE); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata, | 
|  | enum nl80211_iftype type) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | if (type == ieee80211_vif_type_p2p(&sdata->vif)) | 
|  | return 0; | 
|  |  | 
|  | if (ieee80211_sdata_running(sdata)) { | 
|  | ret = ieee80211_runtime_change_iftype(sdata, type); | 
|  | if (ret) | 
|  | return ret; | 
|  | } else { | 
|  | /* Purge and reset type-dependent state. */ | 
|  | ieee80211_teardown_sdata(sdata); | 
|  | ieee80211_setup_sdata(sdata, type); | 
|  | } | 
|  |  | 
|  | /* reset some values that shouldn't be kept across type changes */ | 
|  | if (type == NL80211_IFTYPE_STATION) | 
|  | sdata->u.mgd.use_4addr = false; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ieee80211_assign_perm_addr(struct ieee80211_local *local, | 
|  | u8 *perm_addr, enum nl80211_iftype type) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  | u64 mask, start, addr, val, inc; | 
|  | u8 *m; | 
|  | u8 tmp_addr[ETH_ALEN]; | 
|  | int i; | 
|  |  | 
|  | /* default ... something at least */ | 
|  | memcpy(perm_addr, local->hw.wiphy->perm_addr, ETH_ALEN); | 
|  |  | 
|  | if (is_zero_ether_addr(local->hw.wiphy->addr_mask) && | 
|  | local->hw.wiphy->n_addresses <= 1) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&local->iflist_mtx); | 
|  |  | 
|  | switch (type) { | 
|  | case NL80211_IFTYPE_MONITOR: | 
|  | /* doesn't matter */ | 
|  | break; | 
|  | case NL80211_IFTYPE_AP_VLAN: | 
|  | /* match up with an AP interface */ | 
|  | list_for_each_entry(sdata, &local->interfaces, list) { | 
|  | if (sdata->vif.type != NL80211_IFTYPE_AP) | 
|  | continue; | 
|  | memcpy(perm_addr, sdata->vif.addr, ETH_ALEN); | 
|  | break; | 
|  | } | 
|  | /* keep default if no AP interface present */ | 
|  | break; | 
|  | case NL80211_IFTYPE_P2P_CLIENT: | 
|  | case NL80211_IFTYPE_P2P_GO: | 
|  | if (ieee80211_hw_check(&local->hw, P2P_DEV_ADDR_FOR_INTF)) { | 
|  | list_for_each_entry(sdata, &local->interfaces, list) { | 
|  | if (sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE) | 
|  | continue; | 
|  | if (!ieee80211_sdata_running(sdata)) | 
|  | continue; | 
|  | memcpy(perm_addr, sdata->vif.addr, ETH_ALEN); | 
|  | goto out_unlock; | 
|  | } | 
|  | } | 
|  | fallthrough; | 
|  | default: | 
|  | /* assign a new address if possible -- try n_addresses first */ | 
|  | for (i = 0; i < local->hw.wiphy->n_addresses; i++) { | 
|  | bool used = false; | 
|  |  | 
|  | list_for_each_entry(sdata, &local->interfaces, list) { | 
|  | if (ether_addr_equal(local->hw.wiphy->addresses[i].addr, | 
|  | sdata->vif.addr)) { | 
|  | used = true; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!used) { | 
|  | memcpy(perm_addr, | 
|  | local->hw.wiphy->addresses[i].addr, | 
|  | ETH_ALEN); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* try mask if available */ | 
|  | if (is_zero_ether_addr(local->hw.wiphy->addr_mask)) | 
|  | break; | 
|  |  | 
|  | m = local->hw.wiphy->addr_mask; | 
|  | mask =	((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) | | 
|  | ((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) | | 
|  | ((u64)m[4] << 1*8) | ((u64)m[5] << 0*8); | 
|  |  | 
|  | if (__ffs64(mask) + hweight64(mask) != fls64(mask)) { | 
|  | /* not a contiguous mask ... not handled now! */ | 
|  | pr_info("not contiguous\n"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Pick address of existing interface in case user changed | 
|  | * MAC address manually, default to perm_addr. | 
|  | */ | 
|  | m = local->hw.wiphy->perm_addr; | 
|  | list_for_each_entry(sdata, &local->interfaces, list) { | 
|  | if (sdata->vif.type == NL80211_IFTYPE_MONITOR) | 
|  | continue; | 
|  | m = sdata->vif.addr; | 
|  | break; | 
|  | } | 
|  | start = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) | | 
|  | ((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) | | 
|  | ((u64)m[4] << 1*8) | ((u64)m[5] << 0*8); | 
|  |  | 
|  | inc = 1ULL<<__ffs64(mask); | 
|  | val = (start & mask); | 
|  | addr = (start & ~mask) | (val & mask); | 
|  | do { | 
|  | bool used = false; | 
|  |  | 
|  | tmp_addr[5] = addr >> 0*8; | 
|  | tmp_addr[4] = addr >> 1*8; | 
|  | tmp_addr[3] = addr >> 2*8; | 
|  | tmp_addr[2] = addr >> 3*8; | 
|  | tmp_addr[1] = addr >> 4*8; | 
|  | tmp_addr[0] = addr >> 5*8; | 
|  |  | 
|  | val += inc; | 
|  |  | 
|  | list_for_each_entry(sdata, &local->interfaces, list) { | 
|  | if (ether_addr_equal(tmp_addr, sdata->vif.addr)) { | 
|  | used = true; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!used) { | 
|  | memcpy(perm_addr, tmp_addr, ETH_ALEN); | 
|  | break; | 
|  | } | 
|  | addr = (start & ~mask) | (val & mask); | 
|  | } while (addr != start); | 
|  |  | 
|  | break; | 
|  | } | 
|  |  | 
|  | out_unlock: | 
|  | mutex_unlock(&local->iflist_mtx); | 
|  | } | 
|  |  | 
|  | int ieee80211_if_add(struct ieee80211_local *local, const char *name, | 
|  | unsigned char name_assign_type, | 
|  | struct wireless_dev **new_wdev, enum nl80211_iftype type, | 
|  | struct vif_params *params) | 
|  | { | 
|  | struct net_device *ndev = NULL; | 
|  | struct ieee80211_sub_if_data *sdata = NULL; | 
|  | struct txq_info *txqi; | 
|  | void (*if_setup)(struct net_device *dev); | 
|  | int ret, i; | 
|  | int txqs = 1; | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | if (type == NL80211_IFTYPE_P2P_DEVICE || type == NL80211_IFTYPE_NAN) { | 
|  | struct wireless_dev *wdev; | 
|  |  | 
|  | sdata = kzalloc(sizeof(*sdata) + local->hw.vif_data_size, | 
|  | GFP_KERNEL); | 
|  | if (!sdata) | 
|  | return -ENOMEM; | 
|  | wdev = &sdata->wdev; | 
|  |  | 
|  | sdata->dev = NULL; | 
|  | strscpy(sdata->name, name, IFNAMSIZ); | 
|  | ieee80211_assign_perm_addr(local, wdev->address, type); | 
|  | memcpy(sdata->vif.addr, wdev->address, ETH_ALEN); | 
|  | ether_addr_copy(sdata->vif.bss_conf.addr, sdata->vif.addr); | 
|  | } else { | 
|  | int size = ALIGN(sizeof(*sdata) + local->hw.vif_data_size, | 
|  | sizeof(void *)); | 
|  | int txq_size = 0; | 
|  |  | 
|  | if (local->ops->wake_tx_queue && | 
|  | type != NL80211_IFTYPE_AP_VLAN && | 
|  | (type != NL80211_IFTYPE_MONITOR || | 
|  | (params->flags & MONITOR_FLAG_ACTIVE))) | 
|  | txq_size += sizeof(struct txq_info) + | 
|  | local->hw.txq_data_size; | 
|  |  | 
|  | if (local->ops->wake_tx_queue) { | 
|  | if_setup = ieee80211_if_setup_no_queue; | 
|  | } else { | 
|  | if_setup = ieee80211_if_setup; | 
|  | if (local->hw.queues >= IEEE80211_NUM_ACS) | 
|  | txqs = IEEE80211_NUM_ACS; | 
|  | } | 
|  |  | 
|  | ndev = alloc_netdev_mqs(size + txq_size, | 
|  | name, name_assign_type, | 
|  | if_setup, txqs, 1); | 
|  | if (!ndev) | 
|  | return -ENOMEM; | 
|  |  | 
|  | if (!local->ops->wake_tx_queue && local->hw.wiphy->tx_queue_len) | 
|  | ndev->tx_queue_len = local->hw.wiphy->tx_queue_len; | 
|  |  | 
|  | dev_net_set(ndev, wiphy_net(local->hw.wiphy)); | 
|  |  | 
|  | ndev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats); | 
|  | if (!ndev->tstats) { | 
|  | free_netdev(ndev); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | ndev->needed_headroom = local->tx_headroom + | 
|  | 4*6 /* four MAC addresses */ | 
|  | + 2 + 2 + 2 + 2 /* ctl, dur, seq, qos */ | 
|  | + 6 /* mesh */ | 
|  | + 8 /* rfc1042/bridge tunnel */ | 
|  | - ETH_HLEN /* ethernet hard_header_len */ | 
|  | + IEEE80211_ENCRYPT_HEADROOM; | 
|  | ndev->needed_tailroom = IEEE80211_ENCRYPT_TAILROOM; | 
|  |  | 
|  | ret = dev_alloc_name(ndev, ndev->name); | 
|  | if (ret < 0) { | 
|  | ieee80211_if_free(ndev); | 
|  | free_netdev(ndev); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ieee80211_assign_perm_addr(local, ndev->perm_addr, type); | 
|  | if (is_valid_ether_addr(params->macaddr)) | 
|  | eth_hw_addr_set(ndev, params->macaddr); | 
|  | else | 
|  | eth_hw_addr_set(ndev, ndev->perm_addr); | 
|  | SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy)); | 
|  |  | 
|  | /* don't use IEEE80211_DEV_TO_SUB_IF -- it checks too much */ | 
|  | sdata = netdev_priv(ndev); | 
|  | ndev->ieee80211_ptr = &sdata->wdev; | 
|  | memcpy(sdata->vif.addr, ndev->dev_addr, ETH_ALEN); | 
|  | ether_addr_copy(sdata->vif.bss_conf.addr, sdata->vif.addr); | 
|  | memcpy(sdata->name, ndev->name, IFNAMSIZ); | 
|  |  | 
|  | if (txq_size) { | 
|  | txqi = netdev_priv(ndev) + size; | 
|  | ieee80211_txq_init(sdata, NULL, txqi, 0); | 
|  | } | 
|  |  | 
|  | sdata->dev = ndev; | 
|  | } | 
|  |  | 
|  | /* initialise type-independent data */ | 
|  | sdata->wdev.wiphy = local->hw.wiphy; | 
|  |  | 
|  | ieee80211_sdata_init(local, sdata); | 
|  |  | 
|  | ieee80211_init_frag_cache(&sdata->frags); | 
|  |  | 
|  | INIT_LIST_HEAD(&sdata->key_list); | 
|  |  | 
|  | INIT_DELAYED_WORK(&sdata->dec_tailroom_needed_wk, | 
|  | ieee80211_delayed_tailroom_dec); | 
|  |  | 
|  | for (i = 0; i < NUM_NL80211_BANDS; i++) { | 
|  | struct ieee80211_supported_band *sband; | 
|  | sband = local->hw.wiphy->bands[i]; | 
|  | sdata->rc_rateidx_mask[i] = | 
|  | sband ? (1 << sband->n_bitrates) - 1 : 0; | 
|  | if (sband) { | 
|  | __le16 cap; | 
|  | u16 *vht_rate_mask; | 
|  |  | 
|  | memcpy(sdata->rc_rateidx_mcs_mask[i], | 
|  | sband->ht_cap.mcs.rx_mask, | 
|  | sizeof(sdata->rc_rateidx_mcs_mask[i])); | 
|  |  | 
|  | cap = sband->vht_cap.vht_mcs.rx_mcs_map; | 
|  | vht_rate_mask = sdata->rc_rateidx_vht_mcs_mask[i]; | 
|  | ieee80211_get_vht_mask_from_cap(cap, vht_rate_mask); | 
|  | } else { | 
|  | memset(sdata->rc_rateidx_mcs_mask[i], 0, | 
|  | sizeof(sdata->rc_rateidx_mcs_mask[i])); | 
|  | memset(sdata->rc_rateidx_vht_mcs_mask[i], 0, | 
|  | sizeof(sdata->rc_rateidx_vht_mcs_mask[i])); | 
|  | } | 
|  | } | 
|  |  | 
|  | ieee80211_set_default_queues(sdata); | 
|  |  | 
|  | sdata->deflink.ap_power_level = IEEE80211_UNSET_POWER_LEVEL; | 
|  | sdata->deflink.user_power_level = local->user_power_level; | 
|  |  | 
|  | /* setup type-dependent data */ | 
|  | ieee80211_setup_sdata(sdata, type); | 
|  |  | 
|  | if (ndev) { | 
|  | ndev->ieee80211_ptr->use_4addr = params->use_4addr; | 
|  | if (type == NL80211_IFTYPE_STATION) | 
|  | sdata->u.mgd.use_4addr = params->use_4addr; | 
|  |  | 
|  | ndev->features |= local->hw.netdev_features; | 
|  | ndev->priv_flags |= IFF_LIVE_ADDR_CHANGE; | 
|  | ndev->hw_features |= ndev->features & | 
|  | MAC80211_SUPPORTED_FEATURES_TX; | 
|  |  | 
|  | netdev_set_default_ethtool_ops(ndev, &ieee80211_ethtool_ops); | 
|  |  | 
|  | /* MTU range is normally 256 - 2304, where the upper limit is | 
|  | * the maximum MSDU size. Monitor interfaces send and receive | 
|  | * MPDU and A-MSDU frames which may be much larger so we do | 
|  | * not impose an upper limit in that case. | 
|  | */ | 
|  | ndev->min_mtu = 256; | 
|  | if (type == NL80211_IFTYPE_MONITOR) | 
|  | ndev->max_mtu = 0; | 
|  | else | 
|  | ndev->max_mtu = local->hw.max_mtu; | 
|  |  | 
|  | ret = cfg80211_register_netdevice(ndev); | 
|  | if (ret) { | 
|  | free_netdev(ndev); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | mutex_lock(&local->iflist_mtx); | 
|  | list_add_tail_rcu(&sdata->list, &local->interfaces); | 
|  | mutex_unlock(&local->iflist_mtx); | 
|  |  | 
|  | if (new_wdev) | 
|  | *new_wdev = &sdata->wdev; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | mutex_lock(&sdata->local->iflist_mtx); | 
|  | list_del_rcu(&sdata->list); | 
|  | mutex_unlock(&sdata->local->iflist_mtx); | 
|  |  | 
|  | if (sdata->vif.txq) | 
|  | ieee80211_txq_purge(sdata->local, to_txq_info(sdata->vif.txq)); | 
|  |  | 
|  | synchronize_rcu(); | 
|  |  | 
|  | cfg80211_unregister_wdev(&sdata->wdev); | 
|  |  | 
|  | if (!sdata->dev) { | 
|  | ieee80211_teardown_sdata(sdata); | 
|  | kfree(sdata); | 
|  | } | 
|  | } | 
|  |  | 
|  | void ieee80211_sdata_stop(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | if (WARN_ON_ONCE(!test_bit(SDATA_STATE_RUNNING, &sdata->state))) | 
|  | return; | 
|  | ieee80211_do_stop(sdata, true); | 
|  | } | 
|  |  | 
|  | void ieee80211_remove_interfaces(struct ieee80211_local *local) | 
|  | { | 
|  | struct ieee80211_sub_if_data *sdata, *tmp; | 
|  | LIST_HEAD(unreg_list); | 
|  | LIST_HEAD(wdev_list); | 
|  |  | 
|  | ASSERT_RTNL(); | 
|  |  | 
|  | /* Before destroying the interfaces, make sure they're all stopped so | 
|  | * that the hardware is stopped. Otherwise, the driver might still be | 
|  | * iterating the interfaces during the shutdown, e.g. from a worker | 
|  | * or from RX processing or similar, and if it does so (using atomic | 
|  | * iteration) while we're manipulating the list, the iteration will | 
|  | * crash. | 
|  | * | 
|  | * After this, the hardware should be stopped and the driver should | 
|  | * have stopped all of its activities, so that we can do RCU-unaware | 
|  | * manipulations of the interface list below. | 
|  | */ | 
|  | cfg80211_shutdown_all_interfaces(local->hw.wiphy); | 
|  |  | 
|  | WARN(local->open_count, "%s: open count remains %d\n", | 
|  | wiphy_name(local->hw.wiphy), local->open_count); | 
|  |  | 
|  | ieee80211_txq_teardown_flows(local); | 
|  |  | 
|  | mutex_lock(&local->iflist_mtx); | 
|  | list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) { | 
|  | list_del(&sdata->list); | 
|  |  | 
|  | if (sdata->dev) | 
|  | unregister_netdevice_queue(sdata->dev, &unreg_list); | 
|  | else | 
|  | list_add(&sdata->list, &wdev_list); | 
|  | } | 
|  | mutex_unlock(&local->iflist_mtx); | 
|  |  | 
|  | unregister_netdevice_many(&unreg_list); | 
|  |  | 
|  | wiphy_lock(local->hw.wiphy); | 
|  | list_for_each_entry_safe(sdata, tmp, &wdev_list, list) { | 
|  | list_del(&sdata->list); | 
|  | cfg80211_unregister_wdev(&sdata->wdev); | 
|  | kfree(sdata); | 
|  | } | 
|  | wiphy_unlock(local->hw.wiphy); | 
|  | } | 
|  |  | 
|  | static int netdev_notify(struct notifier_block *nb, | 
|  | unsigned long state, void *ptr) | 
|  | { | 
|  | struct net_device *dev = netdev_notifier_info_to_dev(ptr); | 
|  | struct ieee80211_sub_if_data *sdata; | 
|  |  | 
|  | if (state != NETDEV_CHANGENAME) | 
|  | return NOTIFY_DONE; | 
|  |  | 
|  | if (!dev->ieee80211_ptr || !dev->ieee80211_ptr->wiphy) | 
|  | return NOTIFY_DONE; | 
|  |  | 
|  | if (dev->ieee80211_ptr->wiphy->privid != mac80211_wiphy_privid) | 
|  | return NOTIFY_DONE; | 
|  |  | 
|  | sdata = IEEE80211_DEV_TO_SUB_IF(dev); | 
|  | memcpy(sdata->name, dev->name, IFNAMSIZ); | 
|  | ieee80211_debugfs_rename_netdev(sdata); | 
|  |  | 
|  | return NOTIFY_OK; | 
|  | } | 
|  |  | 
|  | static struct notifier_block mac80211_netdev_notifier = { | 
|  | .notifier_call = netdev_notify, | 
|  | }; | 
|  |  | 
|  | int ieee80211_iface_init(void) | 
|  | { | 
|  | return register_netdevice_notifier(&mac80211_netdev_notifier); | 
|  | } | 
|  |  | 
|  | void ieee80211_iface_exit(void) | 
|  | { | 
|  | unregister_netdevice_notifier(&mac80211_netdev_notifier); | 
|  | } | 
|  |  | 
|  | void ieee80211_vif_inc_num_mcast(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP) | 
|  | atomic_inc(&sdata->u.ap.num_mcast_sta); | 
|  | else if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | 
|  | atomic_inc(&sdata->u.vlan.num_mcast_sta); | 
|  | } | 
|  |  | 
|  | void ieee80211_vif_dec_num_mcast(struct ieee80211_sub_if_data *sdata) | 
|  | { | 
|  | if (sdata->vif.type == NL80211_IFTYPE_AP) | 
|  | atomic_dec(&sdata->u.ap.num_mcast_sta); | 
|  | else if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | 
|  | atomic_dec(&sdata->u.vlan.num_mcast_sta); | 
|  | } |