|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * ST OHCI driver | 
|  | * | 
|  | * Copyright (C) 2014 STMicroelectronics – All Rights Reserved | 
|  | * | 
|  | * Author: Peter Griffin <peter.griffin@linaro.org> | 
|  | * | 
|  | * Derived from ohci-platform.c | 
|  | */ | 
|  |  | 
|  | #include <linux/clk.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/hrtimer.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/phy/phy.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/reset.h> | 
|  | #include <linux/usb/ohci_pdriver.h> | 
|  | #include <linux/usb.h> | 
|  | #include <linux/usb/hcd.h> | 
|  |  | 
|  | #include "ohci.h" | 
|  |  | 
|  | #define USB_MAX_CLKS 3 | 
|  |  | 
|  | struct st_ohci_platform_priv { | 
|  | struct clk *clks[USB_MAX_CLKS]; | 
|  | struct clk *clk48; | 
|  | struct reset_control *rst; | 
|  | struct reset_control *pwr; | 
|  | struct phy *phy; | 
|  | }; | 
|  |  | 
|  | #define DRIVER_DESC "OHCI STMicroelectronics driver" | 
|  |  | 
|  | #define hcd_to_ohci_priv(h) \ | 
|  | ((struct st_ohci_platform_priv *)hcd_to_ohci(h)->priv) | 
|  |  | 
|  | static int st_ohci_platform_power_on(struct platform_device *dev) | 
|  | { | 
|  | struct usb_hcd *hcd = platform_get_drvdata(dev); | 
|  | struct st_ohci_platform_priv *priv = hcd_to_ohci_priv(hcd); | 
|  | int clk, ret; | 
|  |  | 
|  | ret = reset_control_deassert(priv->pwr); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = reset_control_deassert(priv->rst); | 
|  | if (ret) | 
|  | goto err_assert_power; | 
|  |  | 
|  | /* some SoCs don't have a dedicated 48Mhz clock, but those that do | 
|  | need the rate to be explicitly set */ | 
|  | if (priv->clk48) { | 
|  | ret = clk_set_rate(priv->clk48, 48000000); | 
|  | if (ret) | 
|  | goto err_assert_reset; | 
|  | } | 
|  |  | 
|  | for (clk = 0; clk < USB_MAX_CLKS && priv->clks[clk]; clk++) { | 
|  | ret = clk_prepare_enable(priv->clks[clk]); | 
|  | if (ret) | 
|  | goto err_disable_clks; | 
|  | } | 
|  |  | 
|  | ret = phy_init(priv->phy); | 
|  | if (ret) | 
|  | goto err_disable_clks; | 
|  |  | 
|  | ret = phy_power_on(priv->phy); | 
|  | if (ret) | 
|  | goto err_exit_phy; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_exit_phy: | 
|  | phy_exit(priv->phy); | 
|  | err_disable_clks: | 
|  | while (--clk >= 0) | 
|  | clk_disable_unprepare(priv->clks[clk]); | 
|  | err_assert_reset: | 
|  | reset_control_assert(priv->rst); | 
|  | err_assert_power: | 
|  | reset_control_assert(priv->pwr); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void st_ohci_platform_power_off(struct platform_device *dev) | 
|  | { | 
|  | struct usb_hcd *hcd = platform_get_drvdata(dev); | 
|  | struct st_ohci_platform_priv *priv = hcd_to_ohci_priv(hcd); | 
|  |  | 
|  | int clk; | 
|  |  | 
|  | reset_control_assert(priv->pwr); | 
|  |  | 
|  | reset_control_assert(priv->rst); | 
|  |  | 
|  | phy_power_off(priv->phy); | 
|  |  | 
|  | phy_exit(priv->phy); | 
|  |  | 
|  | for (clk = USB_MAX_CLKS - 1; clk >= 0; clk--) | 
|  | if (priv->clks[clk]) | 
|  | clk_disable_unprepare(priv->clks[clk]); | 
|  | } | 
|  |  | 
|  | static struct hc_driver __read_mostly ohci_platform_hc_driver; | 
|  |  | 
|  | static const struct ohci_driver_overrides platform_overrides __initconst = { | 
|  | .product_desc =		"ST OHCI controller", | 
|  | .extra_priv_size =	sizeof(struct st_ohci_platform_priv), | 
|  | }; | 
|  |  | 
|  | static struct usb_ohci_pdata ohci_platform_defaults = { | 
|  | .power_on =		st_ohci_platform_power_on, | 
|  | .power_suspend =	st_ohci_platform_power_off, | 
|  | .power_off =		st_ohci_platform_power_off, | 
|  | }; | 
|  |  | 
|  | static int st_ohci_platform_probe(struct platform_device *dev) | 
|  | { | 
|  | struct usb_hcd *hcd; | 
|  | struct resource *res_mem; | 
|  | struct usb_ohci_pdata *pdata = &ohci_platform_defaults; | 
|  | struct st_ohci_platform_priv *priv; | 
|  | int err, irq, clk = 0; | 
|  |  | 
|  | if (usb_disabled()) | 
|  | return -ENODEV; | 
|  |  | 
|  | irq = platform_get_irq(dev, 0); | 
|  | if (irq < 0) | 
|  | return irq; | 
|  |  | 
|  | hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev, | 
|  | dev_name(&dev->dev)); | 
|  | if (!hcd) | 
|  | return -ENOMEM; | 
|  |  | 
|  | platform_set_drvdata(dev, hcd); | 
|  | dev->dev.platform_data = pdata; | 
|  | priv = hcd_to_ohci_priv(hcd); | 
|  |  | 
|  | priv->phy = devm_phy_get(&dev->dev, "usb"); | 
|  | if (IS_ERR(priv->phy)) { | 
|  | err = PTR_ERR(priv->phy); | 
|  | goto err_put_hcd; | 
|  | } | 
|  |  | 
|  | for (clk = 0; clk < USB_MAX_CLKS; clk++) { | 
|  | priv->clks[clk] = of_clk_get(dev->dev.of_node, clk); | 
|  | if (IS_ERR(priv->clks[clk])) { | 
|  | err = PTR_ERR(priv->clks[clk]); | 
|  | if (err == -EPROBE_DEFER) | 
|  | goto err_put_clks; | 
|  | priv->clks[clk] = NULL; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* some SoCs don't have a dedicated 48Mhz clock, but those that | 
|  | do need the rate to be explicitly set */ | 
|  | priv->clk48 = devm_clk_get(&dev->dev, "clk48"); | 
|  | if (IS_ERR(priv->clk48)) { | 
|  | dev_info(&dev->dev, "48MHz clk not found\n"); | 
|  | priv->clk48 = NULL; | 
|  | } | 
|  |  | 
|  | priv->pwr = | 
|  | devm_reset_control_get_optional_shared(&dev->dev, "power"); | 
|  | if (IS_ERR(priv->pwr)) { | 
|  | err = PTR_ERR(priv->pwr); | 
|  | goto err_put_clks; | 
|  | } | 
|  |  | 
|  | priv->rst = | 
|  | devm_reset_control_get_optional_shared(&dev->dev, "softreset"); | 
|  | if (IS_ERR(priv->rst)) { | 
|  | err = PTR_ERR(priv->rst); | 
|  | goto err_put_clks; | 
|  | } | 
|  |  | 
|  | if (pdata->power_on) { | 
|  | err = pdata->power_on(dev); | 
|  | if (err < 0) | 
|  | goto err_power; | 
|  | } | 
|  |  | 
|  | hcd->regs = devm_platform_get_and_ioremap_resource(dev, 0, &res_mem); | 
|  | if (IS_ERR(hcd->regs)) { | 
|  | err = PTR_ERR(hcd->regs); | 
|  | goto err_power; | 
|  | } | 
|  | hcd->rsrc_start = res_mem->start; | 
|  | hcd->rsrc_len = resource_size(res_mem); | 
|  |  | 
|  | err = usb_add_hcd(hcd, irq, IRQF_SHARED); | 
|  | if (err) | 
|  | goto err_power; | 
|  |  | 
|  | device_wakeup_enable(hcd->self.controller); | 
|  |  | 
|  | platform_set_drvdata(dev, hcd); | 
|  |  | 
|  | return err; | 
|  |  | 
|  | err_power: | 
|  | if (pdata->power_off) | 
|  | pdata->power_off(dev); | 
|  |  | 
|  | err_put_clks: | 
|  | while (--clk >= 0) | 
|  | clk_put(priv->clks[clk]); | 
|  | err_put_hcd: | 
|  | if (pdata == &ohci_platform_defaults) | 
|  | dev->dev.platform_data = NULL; | 
|  |  | 
|  | usb_put_hcd(hcd); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void st_ohci_platform_remove(struct platform_device *dev) | 
|  | { | 
|  | struct usb_hcd *hcd = platform_get_drvdata(dev); | 
|  | struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev); | 
|  | struct st_ohci_platform_priv *priv = hcd_to_ohci_priv(hcd); | 
|  | int clk; | 
|  |  | 
|  | usb_remove_hcd(hcd); | 
|  |  | 
|  | if (pdata->power_off) | 
|  | pdata->power_off(dev); | 
|  |  | 
|  |  | 
|  | for (clk = 0; clk < USB_MAX_CLKS && priv->clks[clk]; clk++) | 
|  | clk_put(priv->clks[clk]); | 
|  |  | 
|  | usb_put_hcd(hcd); | 
|  |  | 
|  | if (pdata == &ohci_platform_defaults) | 
|  | dev->dev.platform_data = NULL; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  |  | 
|  | static int st_ohci_suspend(struct device *dev) | 
|  | { | 
|  | struct usb_hcd *hcd = dev_get_drvdata(dev); | 
|  | struct usb_ohci_pdata *pdata = dev->platform_data; | 
|  | struct platform_device *pdev = to_platform_device(dev); | 
|  | bool do_wakeup = device_may_wakeup(dev); | 
|  | int ret; | 
|  |  | 
|  | ret = ohci_suspend(hcd, do_wakeup); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (pdata->power_suspend) | 
|  | pdata->power_suspend(pdev); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int st_ohci_resume(struct device *dev) | 
|  | { | 
|  | struct usb_hcd *hcd = dev_get_drvdata(dev); | 
|  | struct usb_ohci_pdata *pdata = dev_get_platdata(dev); | 
|  | struct platform_device *pdev = to_platform_device(dev); | 
|  | int err; | 
|  |  | 
|  | if (pdata->power_on) { | 
|  | err = pdata->power_on(pdev); | 
|  | if (err < 0) | 
|  | return err; | 
|  | } | 
|  |  | 
|  | ohci_resume(hcd, false); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static SIMPLE_DEV_PM_OPS(st_ohci_pm_ops, st_ohci_suspend, st_ohci_resume); | 
|  |  | 
|  | #endif /* CONFIG_PM_SLEEP */ | 
|  |  | 
|  | static const struct of_device_id st_ohci_platform_ids[] = { | 
|  | { .compatible = "st,st-ohci-300x", }, | 
|  | { /* sentinel */ } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, st_ohci_platform_ids); | 
|  |  | 
|  | static struct platform_driver ohci_platform_driver = { | 
|  | .probe		= st_ohci_platform_probe, | 
|  | .remove_new	= st_ohci_platform_remove, | 
|  | .shutdown	= usb_hcd_platform_shutdown, | 
|  | .driver		= { | 
|  | .name	= "st-ohci", | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  | .pm	= &st_ohci_pm_ops, | 
|  | #endif | 
|  | .of_match_table = st_ohci_platform_ids, | 
|  | } | 
|  | }; | 
|  |  | 
|  | static int __init ohci_platform_init(void) | 
|  | { | 
|  | if (usb_disabled()) | 
|  | return -ENODEV; | 
|  |  | 
|  | ohci_init_driver(&ohci_platform_hc_driver, &platform_overrides); | 
|  | return platform_driver_register(&ohci_platform_driver); | 
|  | } | 
|  | module_init(ohci_platform_init); | 
|  |  | 
|  | static void __exit ohci_platform_cleanup(void) | 
|  | { | 
|  | platform_driver_unregister(&ohci_platform_driver); | 
|  | } | 
|  | module_exit(ohci_platform_cleanup); | 
|  |  | 
|  | MODULE_DESCRIPTION(DRIVER_DESC); | 
|  | MODULE_AUTHOR("Peter Griffin <peter.griffin@linaro.org>"); | 
|  | MODULE_LICENSE("GPL"); |