|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * PCI glue driver for SPI PXA2xx compatible controllers. | 
|  | * CE4100's SPI device is more or less the same one as found on PXA. | 
|  | * | 
|  | * Copyright (C) 2016, 2021 Intel Corporation | 
|  | */ | 
|  | #include <linux/clk-provider.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/platform_device.h> | 
|  |  | 
|  | #include <linux/spi/pxa2xx_spi.h> | 
|  |  | 
|  | #include <linux/dmaengine.h> | 
|  | #include <linux/platform_data/dma-dw.h> | 
|  |  | 
|  | #define PCI_DEVICE_ID_INTEL_QUARK_X1000		0x0935 | 
|  | #define PCI_DEVICE_ID_INTEL_BYT			0x0f0e | 
|  | #define PCI_DEVICE_ID_INTEL_MRFLD		0x1194 | 
|  | #define PCI_DEVICE_ID_INTEL_BSW0		0x228e | 
|  | #define PCI_DEVICE_ID_INTEL_BSW1		0x2290 | 
|  | #define PCI_DEVICE_ID_INTEL_BSW2		0x22ac | 
|  | #define PCI_DEVICE_ID_INTEL_CE4100		0x2e6a | 
|  | #define PCI_DEVICE_ID_INTEL_LPT0_0		0x9c65 | 
|  | #define PCI_DEVICE_ID_INTEL_LPT0_1		0x9c66 | 
|  | #define PCI_DEVICE_ID_INTEL_LPT1_0		0x9ce5 | 
|  | #define PCI_DEVICE_ID_INTEL_LPT1_1		0x9ce6 | 
|  |  | 
|  | struct pxa_spi_info { | 
|  | int (*setup)(struct pci_dev *pdev, struct pxa2xx_spi_controller *c); | 
|  | }; | 
|  |  | 
|  | static struct dw_dma_slave byt_tx_param = { .dst_id = 0 }; | 
|  | static struct dw_dma_slave byt_rx_param = { .src_id = 1 }; | 
|  |  | 
|  | static struct dw_dma_slave mrfld3_tx_param = { .dst_id = 15 }; | 
|  | static struct dw_dma_slave mrfld3_rx_param = { .src_id = 14 }; | 
|  | static struct dw_dma_slave mrfld5_tx_param = { .dst_id = 13 }; | 
|  | static struct dw_dma_slave mrfld5_rx_param = { .src_id = 12 }; | 
|  | static struct dw_dma_slave mrfld6_tx_param = { .dst_id = 11 }; | 
|  | static struct dw_dma_slave mrfld6_rx_param = { .src_id = 10 }; | 
|  |  | 
|  | static struct dw_dma_slave bsw0_tx_param = { .dst_id = 0 }; | 
|  | static struct dw_dma_slave bsw0_rx_param = { .src_id = 1 }; | 
|  | static struct dw_dma_slave bsw1_tx_param = { .dst_id = 6 }; | 
|  | static struct dw_dma_slave bsw1_rx_param = { .src_id = 7 }; | 
|  | static struct dw_dma_slave bsw2_tx_param = { .dst_id = 8 }; | 
|  | static struct dw_dma_slave bsw2_rx_param = { .src_id = 9 }; | 
|  |  | 
|  | static struct dw_dma_slave lpt1_tx_param = { .dst_id = 0 }; | 
|  | static struct dw_dma_slave lpt1_rx_param = { .src_id = 1 }; | 
|  | static struct dw_dma_slave lpt0_tx_param = { .dst_id = 2 }; | 
|  | static struct dw_dma_slave lpt0_rx_param = { .src_id = 3 }; | 
|  |  | 
|  | static void pxa2xx_spi_pci_clk_unregister(void *clk) | 
|  | { | 
|  | clk_unregister(clk); | 
|  | } | 
|  |  | 
|  | static int pxa2xx_spi_pci_clk_register(struct pci_dev *dev, struct ssp_device *ssp, | 
|  | unsigned long rate) | 
|  | { | 
|  | char buf[40]; | 
|  |  | 
|  | snprintf(buf, sizeof(buf), "pxa2xx-spi.%d", ssp->port_id); | 
|  | ssp->clk = clk_register_fixed_rate(&dev->dev, buf, NULL, 0, rate); | 
|  | if (IS_ERR(ssp->clk)) | 
|  | return PTR_ERR(ssp->clk); | 
|  |  | 
|  | return devm_add_action_or_reset(&dev->dev, pxa2xx_spi_pci_clk_unregister, ssp->clk); | 
|  | } | 
|  |  | 
|  | static bool lpss_dma_filter(struct dma_chan *chan, void *param) | 
|  | { | 
|  | struct dw_dma_slave *dws = param; | 
|  |  | 
|  | if (dws->dma_dev != chan->device->dev) | 
|  | return false; | 
|  |  | 
|  | chan->private = dws; | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static void lpss_dma_put_device(void *dma_dev) | 
|  | { | 
|  | pci_dev_put(dma_dev); | 
|  | } | 
|  |  | 
|  | static int lpss_spi_setup(struct pci_dev *dev, struct pxa2xx_spi_controller *c) | 
|  | { | 
|  | struct ssp_device *ssp = &c->ssp; | 
|  | struct dw_dma_slave *tx, *rx; | 
|  | struct pci_dev *dma_dev; | 
|  | int ret; | 
|  |  | 
|  | switch (dev->device) { | 
|  | case PCI_DEVICE_ID_INTEL_BYT: | 
|  | ssp->type = LPSS_BYT_SSP; | 
|  | ssp->port_id = 0; | 
|  | c->tx_param = &byt_tx_param; | 
|  | c->rx_param = &byt_rx_param; | 
|  | break; | 
|  | case PCI_DEVICE_ID_INTEL_BSW0: | 
|  | ssp->type = LPSS_BSW_SSP; | 
|  | ssp->port_id = 0; | 
|  | c->tx_param = &bsw0_tx_param; | 
|  | c->rx_param = &bsw0_rx_param; | 
|  | break; | 
|  | case PCI_DEVICE_ID_INTEL_BSW1: | 
|  | ssp->type = LPSS_BSW_SSP; | 
|  | ssp->port_id = 1; | 
|  | c->tx_param = &bsw1_tx_param; | 
|  | c->rx_param = &bsw1_rx_param; | 
|  | break; | 
|  | case PCI_DEVICE_ID_INTEL_BSW2: | 
|  | ssp->type = LPSS_BSW_SSP; | 
|  | ssp->port_id = 2; | 
|  | c->tx_param = &bsw2_tx_param; | 
|  | c->rx_param = &bsw2_rx_param; | 
|  | break; | 
|  | case PCI_DEVICE_ID_INTEL_LPT0_0: | 
|  | case PCI_DEVICE_ID_INTEL_LPT1_0: | 
|  | ssp->type = LPSS_LPT_SSP; | 
|  | ssp->port_id = 0; | 
|  | c->tx_param = &lpt0_tx_param; | 
|  | c->rx_param = &lpt0_rx_param; | 
|  | break; | 
|  | case PCI_DEVICE_ID_INTEL_LPT0_1: | 
|  | case PCI_DEVICE_ID_INTEL_LPT1_1: | 
|  | ssp->type = LPSS_LPT_SSP; | 
|  | ssp->port_id = 1; | 
|  | c->tx_param = &lpt1_tx_param; | 
|  | c->rx_param = &lpt1_rx_param; | 
|  | break; | 
|  | default: | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | c->num_chipselect = 1; | 
|  |  | 
|  | ret = pxa2xx_spi_pci_clk_register(dev, ssp, 50000000); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | dma_dev = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); | 
|  | ret = devm_add_action_or_reset(&dev->dev, lpss_dma_put_device, dma_dev); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | tx = c->tx_param; | 
|  | tx->dma_dev = &dma_dev->dev; | 
|  | tx->m_master = 0; | 
|  | tx->p_master = 1; | 
|  |  | 
|  | rx = c->rx_param; | 
|  | rx->dma_dev = &dma_dev->dev; | 
|  | rx->m_master = 0; | 
|  | rx->p_master = 1; | 
|  |  | 
|  | c->dma_filter = lpss_dma_filter; | 
|  | c->dma_burst_size = 1; | 
|  | c->enable_dma = 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct pxa_spi_info lpss_info_config = { | 
|  | .setup = lpss_spi_setup, | 
|  | }; | 
|  |  | 
|  | static int ce4100_spi_setup(struct pci_dev *dev, struct pxa2xx_spi_controller *c) | 
|  | { | 
|  | struct ssp_device *ssp = &c->ssp; | 
|  |  | 
|  | ssp->type = PXA25x_SSP; | 
|  | ssp->port_id = dev->devfn; | 
|  | c->num_chipselect = dev->devfn; | 
|  |  | 
|  | return pxa2xx_spi_pci_clk_register(dev, ssp, 3686400); | 
|  | } | 
|  |  | 
|  | static const struct pxa_spi_info ce4100_info_config = { | 
|  | .setup = ce4100_spi_setup, | 
|  | }; | 
|  |  | 
|  | static int mrfld_spi_setup(struct pci_dev *dev, struct pxa2xx_spi_controller *c) | 
|  | { | 
|  | struct ssp_device *ssp = &c->ssp; | 
|  | struct dw_dma_slave *tx, *rx; | 
|  | struct pci_dev *dma_dev; | 
|  | int ret; | 
|  |  | 
|  | ssp->type = MRFLD_SSP; | 
|  |  | 
|  | switch (PCI_FUNC(dev->devfn)) { | 
|  | case 0: | 
|  | ssp->port_id = 3; | 
|  | c->num_chipselect = 1; | 
|  | c->tx_param = &mrfld3_tx_param; | 
|  | c->rx_param = &mrfld3_rx_param; | 
|  | break; | 
|  | case 1: | 
|  | ssp->port_id = 5; | 
|  | c->num_chipselect = 4; | 
|  | c->tx_param = &mrfld5_tx_param; | 
|  | c->rx_param = &mrfld5_rx_param; | 
|  | break; | 
|  | case 2: | 
|  | ssp->port_id = 6; | 
|  | c->num_chipselect = 1; | 
|  | c->tx_param = &mrfld6_tx_param; | 
|  | c->rx_param = &mrfld6_rx_param; | 
|  | break; | 
|  | default: | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | ret = pxa2xx_spi_pci_clk_register(dev, ssp, 25000000); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | dma_dev = pci_get_slot(dev->bus, PCI_DEVFN(21, 0)); | 
|  | ret = devm_add_action_or_reset(&dev->dev, lpss_dma_put_device, dma_dev); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | tx = c->tx_param; | 
|  | tx->dma_dev = &dma_dev->dev; | 
|  |  | 
|  | rx = c->rx_param; | 
|  | rx->dma_dev = &dma_dev->dev; | 
|  |  | 
|  | c->dma_filter = lpss_dma_filter; | 
|  | c->dma_burst_size = 8; | 
|  | c->enable_dma = 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct pxa_spi_info mrfld_info_config = { | 
|  | .setup = mrfld_spi_setup, | 
|  | }; | 
|  |  | 
|  | static int qrk_spi_setup(struct pci_dev *dev, struct pxa2xx_spi_controller *c) | 
|  | { | 
|  | struct ssp_device *ssp = &c->ssp; | 
|  |  | 
|  | ssp->type = QUARK_X1000_SSP; | 
|  | ssp->port_id = dev->devfn; | 
|  | c->num_chipselect = 1; | 
|  |  | 
|  | return pxa2xx_spi_pci_clk_register(dev, ssp, 50000000); | 
|  | } | 
|  |  | 
|  | static const struct pxa_spi_info qrk_info_config = { | 
|  | .setup = qrk_spi_setup, | 
|  | }; | 
|  |  | 
|  | static int pxa2xx_spi_pci_probe(struct pci_dev *dev, | 
|  | const struct pci_device_id *ent) | 
|  | { | 
|  | const struct pxa_spi_info *info; | 
|  | struct platform_device_info pi; | 
|  | int ret; | 
|  | struct platform_device *pdev; | 
|  | struct pxa2xx_spi_controller spi_pdata; | 
|  | struct ssp_device *ssp; | 
|  |  | 
|  | ret = pcim_enable_device(dev); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = pcim_iomap_regions(dev, 1 << 0, "PXA2xx SPI"); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | memset(&spi_pdata, 0, sizeof(spi_pdata)); | 
|  |  | 
|  | ssp = &spi_pdata.ssp; | 
|  | ssp->dev = &dev->dev; | 
|  | ssp->phys_base = pci_resource_start(dev, 0); | 
|  | ssp->mmio_base = pcim_iomap_table(dev)[0]; | 
|  |  | 
|  | info = (struct pxa_spi_info *)ent->driver_data; | 
|  | ret = info->setup(dev, &spi_pdata); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | pci_set_master(dev); | 
|  |  | 
|  | ret = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_ALL_TYPES); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | ssp->irq = pci_irq_vector(dev, 0); | 
|  |  | 
|  | memset(&pi, 0, sizeof(pi)); | 
|  | pi.fwnode = dev_fwnode(&dev->dev); | 
|  | pi.parent = &dev->dev; | 
|  | pi.name = "pxa2xx-spi"; | 
|  | pi.id = ssp->port_id; | 
|  | pi.data = &spi_pdata; | 
|  | pi.size_data = sizeof(spi_pdata); | 
|  |  | 
|  | pdev = platform_device_register_full(&pi); | 
|  | if (IS_ERR(pdev)) | 
|  | return PTR_ERR(pdev); | 
|  |  | 
|  | pci_set_drvdata(dev, pdev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void pxa2xx_spi_pci_remove(struct pci_dev *dev) | 
|  | { | 
|  | struct platform_device *pdev = pci_get_drvdata(dev); | 
|  |  | 
|  | platform_device_unregister(pdev); | 
|  | } | 
|  |  | 
|  | static const struct pci_device_id pxa2xx_spi_pci_devices[] = { | 
|  | { PCI_DEVICE_DATA(INTEL, QUARK_X1000, &qrk_info_config) }, | 
|  | { PCI_DEVICE_DATA(INTEL, BYT, &lpss_info_config) }, | 
|  | { PCI_DEVICE_DATA(INTEL, MRFLD, &mrfld_info_config) }, | 
|  | { PCI_DEVICE_DATA(INTEL, BSW0, &lpss_info_config) }, | 
|  | { PCI_DEVICE_DATA(INTEL, BSW1, &lpss_info_config) }, | 
|  | { PCI_DEVICE_DATA(INTEL, BSW2, &lpss_info_config) }, | 
|  | { PCI_DEVICE_DATA(INTEL, CE4100, &ce4100_info_config) }, | 
|  | { PCI_DEVICE_DATA(INTEL, LPT0_0, &lpss_info_config) }, | 
|  | { PCI_DEVICE_DATA(INTEL, LPT0_1, &lpss_info_config) }, | 
|  | { PCI_DEVICE_DATA(INTEL, LPT1_0, &lpss_info_config) }, | 
|  | { PCI_DEVICE_DATA(INTEL, LPT1_1, &lpss_info_config) }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(pci, pxa2xx_spi_pci_devices); | 
|  |  | 
|  | static struct pci_driver pxa2xx_spi_pci_driver = { | 
|  | .name           = "pxa2xx_spi_pci", | 
|  | .id_table       = pxa2xx_spi_pci_devices, | 
|  | .probe          = pxa2xx_spi_pci_probe, | 
|  | .remove         = pxa2xx_spi_pci_remove, | 
|  | }; | 
|  |  | 
|  | module_pci_driver(pxa2xx_spi_pci_driver); | 
|  |  | 
|  | MODULE_DESCRIPTION("CE4100/LPSS PCI-SPI glue code for PXA's driver"); | 
|  | MODULE_LICENSE("GPL v2"); | 
|  | MODULE_AUTHOR("Sebastian Andrzej Siewior <bigeasy@linutronix.de>"); |