|  | /* | 
|  | * Copyright (C) 2008 Maarten Maathuis. | 
|  | * All Rights Reserved. | 
|  | * | 
|  | * Permission is hereby granted, free of charge, to any person obtaining | 
|  | * a copy of this software and associated documentation files (the | 
|  | * "Software"), to deal in the Software without restriction, including | 
|  | * without limitation the rights to use, copy, modify, merge, publish, | 
|  | * distribute, sublicense, and/or sell copies of the Software, and to | 
|  | * permit persons to whom the Software is furnished to do so, subject to | 
|  | * the following conditions: | 
|  | * | 
|  | * The above copyright notice and this permission notice (including the | 
|  | * next paragraph) shall be included in all copies or substantial | 
|  | * portions of the Software. | 
|  | * | 
|  | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | 
|  | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF | 
|  | * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. | 
|  | * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE | 
|  | * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION | 
|  | * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION | 
|  | * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <acpi/button.h> | 
|  |  | 
|  | #include <linux/pm_runtime.h> | 
|  | #include <linux/vga_switcheroo.h> | 
|  |  | 
|  | #include <drm/drm_atomic_helper.h> | 
|  | #include <drm/drm_edid.h> | 
|  | #include <drm/drm_crtc_helper.h> | 
|  | #include <drm/drm_probe_helper.h> | 
|  | #include <drm/drm_atomic.h> | 
|  |  | 
|  | #include "nouveau_reg.h" | 
|  | #include "nouveau_drv.h" | 
|  | #include "dispnv04/hw.h" | 
|  | #include "dispnv50/disp.h" | 
|  | #include "nouveau_acpi.h" | 
|  |  | 
|  | #include "nouveau_display.h" | 
|  | #include "nouveau_connector.h" | 
|  | #include "nouveau_encoder.h" | 
|  | #include "nouveau_crtc.h" | 
|  |  | 
|  | #include <nvif/class.h> | 
|  | #include <nvif/if0011.h> | 
|  |  | 
|  | struct drm_display_mode * | 
|  | nouveau_conn_native_mode(struct drm_connector *connector) | 
|  | { | 
|  | const struct drm_connector_helper_funcs *helper = connector->helper_private; | 
|  | struct nouveau_drm *drm = nouveau_drm(connector->dev); | 
|  | struct drm_device *dev = connector->dev; | 
|  | struct drm_display_mode *mode, *largest = NULL; | 
|  | int high_w = 0, high_h = 0, high_v = 0; | 
|  |  | 
|  | list_for_each_entry(mode, &connector->probed_modes, head) { | 
|  | if (helper->mode_valid(connector, mode) != MODE_OK || | 
|  | (mode->flags & DRM_MODE_FLAG_INTERLACE)) | 
|  | continue; | 
|  |  | 
|  | /* Use preferred mode if there is one.. */ | 
|  | if (mode->type & DRM_MODE_TYPE_PREFERRED) { | 
|  | NV_DEBUG(drm, "native mode from preferred\n"); | 
|  | return drm_mode_duplicate(dev, mode); | 
|  | } | 
|  |  | 
|  | /* Otherwise, take the resolution with the largest width, then | 
|  | * height, then vertical refresh | 
|  | */ | 
|  | if (mode->hdisplay < high_w) | 
|  | continue; | 
|  |  | 
|  | if (mode->hdisplay == high_w && mode->vdisplay < high_h) | 
|  | continue; | 
|  |  | 
|  | if (mode->hdisplay == high_w && mode->vdisplay == high_h && | 
|  | drm_mode_vrefresh(mode) < high_v) | 
|  | continue; | 
|  |  | 
|  | high_w = mode->hdisplay; | 
|  | high_h = mode->vdisplay; | 
|  | high_v = drm_mode_vrefresh(mode); | 
|  | largest = mode; | 
|  | } | 
|  |  | 
|  | NV_DEBUG(drm, "native mode from largest: %dx%d@%d\n", | 
|  | high_w, high_h, high_v); | 
|  | return largest ? drm_mode_duplicate(dev, largest) : NULL; | 
|  | } | 
|  |  | 
|  | int | 
|  | nouveau_conn_atomic_get_property(struct drm_connector *connector, | 
|  | const struct drm_connector_state *state, | 
|  | struct drm_property *property, u64 *val) | 
|  | { | 
|  | struct nouveau_conn_atom *asyc = nouveau_conn_atom(state); | 
|  | struct nouveau_display *disp = nouveau_display(connector->dev); | 
|  | struct drm_device *dev = connector->dev; | 
|  |  | 
|  | if (property == dev->mode_config.scaling_mode_property) | 
|  | *val = asyc->scaler.mode; | 
|  | else if (property == disp->underscan_property) | 
|  | *val = asyc->scaler.underscan.mode; | 
|  | else if (property == disp->underscan_hborder_property) | 
|  | *val = asyc->scaler.underscan.hborder; | 
|  | else if (property == disp->underscan_vborder_property) | 
|  | *val = asyc->scaler.underscan.vborder; | 
|  | else if (property == disp->dithering_mode) | 
|  | *val = asyc->dither.mode; | 
|  | else if (property == disp->dithering_depth) | 
|  | *val = asyc->dither.depth; | 
|  | else if (property == disp->vibrant_hue_property) | 
|  | *val = asyc->procamp.vibrant_hue; | 
|  | else if (property == disp->color_vibrance_property) | 
|  | *val = asyc->procamp.color_vibrance; | 
|  | else | 
|  | return -EINVAL; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int | 
|  | nouveau_conn_atomic_set_property(struct drm_connector *connector, | 
|  | struct drm_connector_state *state, | 
|  | struct drm_property *property, u64 val) | 
|  | { | 
|  | struct drm_device *dev = connector->dev; | 
|  | struct nouveau_conn_atom *asyc = nouveau_conn_atom(state); | 
|  | struct nouveau_display *disp = nouveau_display(dev); | 
|  |  | 
|  | if (property == dev->mode_config.scaling_mode_property) { | 
|  | switch (val) { | 
|  | case DRM_MODE_SCALE_NONE: | 
|  | /* We allow 'None' for EDID modes, even on a fixed | 
|  | * panel (some exist with support for lower refresh | 
|  | * rates, which people might want to use for power- | 
|  | * saving purposes). | 
|  | * | 
|  | * Non-EDID modes will force the use of GPU scaling | 
|  | * to the native mode regardless of this setting. | 
|  | */ | 
|  | switch (connector->connector_type) { | 
|  | case DRM_MODE_CONNECTOR_LVDS: | 
|  | case DRM_MODE_CONNECTOR_eDP: | 
|  | /* ... except prior to G80, where the code | 
|  | * doesn't support such things. | 
|  | */ | 
|  | if (disp->disp.object.oclass < NV50_DISP) | 
|  | return -EINVAL; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | break; | 
|  | case DRM_MODE_SCALE_FULLSCREEN: | 
|  | case DRM_MODE_SCALE_CENTER: | 
|  | case DRM_MODE_SCALE_ASPECT: | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (asyc->scaler.mode != val) { | 
|  | asyc->scaler.mode = val; | 
|  | asyc->set.scaler = true; | 
|  | } | 
|  | } else | 
|  | if (property == disp->underscan_property) { | 
|  | if (asyc->scaler.underscan.mode != val) { | 
|  | asyc->scaler.underscan.mode = val; | 
|  | asyc->set.scaler = true; | 
|  | } | 
|  | } else | 
|  | if (property == disp->underscan_hborder_property) { | 
|  | if (asyc->scaler.underscan.hborder != val) { | 
|  | asyc->scaler.underscan.hborder = val; | 
|  | asyc->set.scaler = true; | 
|  | } | 
|  | } else | 
|  | if (property == disp->underscan_vborder_property) { | 
|  | if (asyc->scaler.underscan.vborder != val) { | 
|  | asyc->scaler.underscan.vborder = val; | 
|  | asyc->set.scaler = true; | 
|  | } | 
|  | } else | 
|  | if (property == disp->dithering_mode) { | 
|  | if (asyc->dither.mode != val) { | 
|  | asyc->dither.mode = val; | 
|  | asyc->set.dither = true; | 
|  | } | 
|  | } else | 
|  | if (property == disp->dithering_depth) { | 
|  | if (asyc->dither.mode != val) { | 
|  | asyc->dither.depth = val; | 
|  | asyc->set.dither = true; | 
|  | } | 
|  | } else | 
|  | if (property == disp->vibrant_hue_property) { | 
|  | if (asyc->procamp.vibrant_hue != val) { | 
|  | asyc->procamp.vibrant_hue = val; | 
|  | asyc->set.procamp = true; | 
|  | } | 
|  | } else | 
|  | if (property == disp->color_vibrance_property) { | 
|  | if (asyc->procamp.color_vibrance != val) { | 
|  | asyc->procamp.color_vibrance = val; | 
|  | asyc->set.procamp = true; | 
|  | } | 
|  | } else { | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void | 
|  | nouveau_conn_atomic_destroy_state(struct drm_connector *connector, | 
|  | struct drm_connector_state *state) | 
|  | { | 
|  | struct nouveau_conn_atom *asyc = nouveau_conn_atom(state); | 
|  | __drm_atomic_helper_connector_destroy_state(&asyc->state); | 
|  | kfree(asyc); | 
|  | } | 
|  |  | 
|  | struct drm_connector_state * | 
|  | nouveau_conn_atomic_duplicate_state(struct drm_connector *connector) | 
|  | { | 
|  | struct nouveau_conn_atom *armc = nouveau_conn_atom(connector->state); | 
|  | struct nouveau_conn_atom *asyc; | 
|  | if (!(asyc = kmalloc(sizeof(*asyc), GFP_KERNEL))) | 
|  | return NULL; | 
|  | __drm_atomic_helper_connector_duplicate_state(connector, &asyc->state); | 
|  | asyc->dither = armc->dither; | 
|  | asyc->scaler = armc->scaler; | 
|  | asyc->procamp = armc->procamp; | 
|  | asyc->set.mask = 0; | 
|  | return &asyc->state; | 
|  | } | 
|  |  | 
|  | void | 
|  | nouveau_conn_reset(struct drm_connector *connector) | 
|  | { | 
|  | struct nouveau_connector *nv_connector = nouveau_connector(connector); | 
|  | struct nouveau_conn_atom *asyc; | 
|  |  | 
|  | if (drm_drv_uses_atomic_modeset(connector->dev)) { | 
|  | if (WARN_ON(!(asyc = kzalloc(sizeof(*asyc), GFP_KERNEL)))) | 
|  | return; | 
|  |  | 
|  | if (connector->state) | 
|  | nouveau_conn_atomic_destroy_state(connector, | 
|  | connector->state); | 
|  |  | 
|  | __drm_atomic_helper_connector_reset(connector, &asyc->state); | 
|  | } else { | 
|  | asyc = &nv_connector->properties_state; | 
|  | } | 
|  |  | 
|  | asyc->dither.mode = DITHERING_MODE_AUTO; | 
|  | asyc->dither.depth = DITHERING_DEPTH_AUTO; | 
|  | asyc->scaler.mode = DRM_MODE_SCALE_NONE; | 
|  | asyc->scaler.underscan.mode = UNDERSCAN_OFF; | 
|  | asyc->procamp.color_vibrance = 150; | 
|  | asyc->procamp.vibrant_hue = 90; | 
|  |  | 
|  | if (nouveau_display(connector->dev)->disp.object.oclass < NV50_DISP) { | 
|  | switch (connector->connector_type) { | 
|  | case DRM_MODE_CONNECTOR_LVDS: | 
|  | /* See note in nouveau_conn_atomic_set_property(). */ | 
|  | asyc->scaler.mode = DRM_MODE_SCALE_FULLSCREEN; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | void | 
|  | nouveau_conn_attach_properties(struct drm_connector *connector) | 
|  | { | 
|  | struct drm_device *dev = connector->dev; | 
|  | struct nouveau_display *disp = nouveau_display(dev); | 
|  | struct nouveau_connector *nv_connector = nouveau_connector(connector); | 
|  | struct nouveau_conn_atom *armc; | 
|  |  | 
|  | if (drm_drv_uses_atomic_modeset(connector->dev)) | 
|  | armc = nouveau_conn_atom(connector->state); | 
|  | else | 
|  | armc = &nv_connector->properties_state; | 
|  |  | 
|  | /* Init DVI-I specific properties. */ | 
|  | if (connector->connector_type == DRM_MODE_CONNECTOR_DVII) | 
|  | drm_object_attach_property(&connector->base, dev->mode_config. | 
|  | dvi_i_subconnector_property, 0); | 
|  |  | 
|  | /* Add overscan compensation options to digital outputs. */ | 
|  | if (disp->underscan_property && | 
|  | (connector->connector_type == DRM_MODE_CONNECTOR_DVID || | 
|  | connector->connector_type == DRM_MODE_CONNECTOR_DVII || | 
|  | connector->connector_type == DRM_MODE_CONNECTOR_HDMIA || | 
|  | connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort)) { | 
|  | drm_object_attach_property(&connector->base, | 
|  | disp->underscan_property, | 
|  | UNDERSCAN_OFF); | 
|  | drm_object_attach_property(&connector->base, | 
|  | disp->underscan_hborder_property, 0); | 
|  | drm_object_attach_property(&connector->base, | 
|  | disp->underscan_vborder_property, 0); | 
|  | } | 
|  |  | 
|  | /* Add hue and saturation options. */ | 
|  | if (disp->vibrant_hue_property) | 
|  | drm_object_attach_property(&connector->base, | 
|  | disp->vibrant_hue_property, | 
|  | armc->procamp.vibrant_hue); | 
|  | if (disp->color_vibrance_property) | 
|  | drm_object_attach_property(&connector->base, | 
|  | disp->color_vibrance_property, | 
|  | armc->procamp.color_vibrance); | 
|  |  | 
|  | /* Scaling mode property. */ | 
|  | switch (connector->connector_type) { | 
|  | case DRM_MODE_CONNECTOR_TV: | 
|  | break; | 
|  | case DRM_MODE_CONNECTOR_VGA: | 
|  | if (disp->disp.object.oclass < NV50_DISP) | 
|  | break; /* Can only scale on DFPs. */ | 
|  | fallthrough; | 
|  | default: | 
|  | drm_object_attach_property(&connector->base, dev->mode_config. | 
|  | scaling_mode_property, | 
|  | armc->scaler.mode); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* Dithering properties. */ | 
|  | switch (connector->connector_type) { | 
|  | case DRM_MODE_CONNECTOR_TV: | 
|  | case DRM_MODE_CONNECTOR_VGA: | 
|  | break; | 
|  | default: | 
|  | if (disp->dithering_mode) { | 
|  | drm_object_attach_property(&connector->base, | 
|  | disp->dithering_mode, | 
|  | armc->dither.mode); | 
|  | } | 
|  | if (disp->dithering_depth) { | 
|  | drm_object_attach_property(&connector->base, | 
|  | disp->dithering_depth, | 
|  | armc->dither.depth); | 
|  | } | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | MODULE_PARM_DESC(tv_disable, "Disable TV-out detection"); | 
|  | int nouveau_tv_disable = 0; | 
|  | module_param_named(tv_disable, nouveau_tv_disable, int, 0400); | 
|  |  | 
|  | MODULE_PARM_DESC(ignorelid, "Ignore ACPI lid status"); | 
|  | int nouveau_ignorelid = 0; | 
|  | module_param_named(ignorelid, nouveau_ignorelid, int, 0400); | 
|  |  | 
|  | MODULE_PARM_DESC(duallink, "Allow dual-link TMDS (default: enabled)"); | 
|  | int nouveau_duallink = 1; | 
|  | module_param_named(duallink, nouveau_duallink, int, 0400); | 
|  |  | 
|  | MODULE_PARM_DESC(hdmimhz, "Force a maximum HDMI pixel clock (in MHz)"); | 
|  | int nouveau_hdmimhz = 0; | 
|  | module_param_named(hdmimhz, nouveau_hdmimhz, int, 0400); | 
|  |  | 
|  | struct nouveau_encoder * | 
|  | find_encoder(struct drm_connector *connector, int type) | 
|  | { | 
|  | struct nouveau_encoder *nv_encoder; | 
|  | struct drm_encoder *enc; | 
|  |  | 
|  | drm_connector_for_each_possible_encoder(connector, enc) { | 
|  | nv_encoder = nouveau_encoder(enc); | 
|  |  | 
|  | if (type == DCB_OUTPUT_ANY || | 
|  | (nv_encoder->dcb && nv_encoder->dcb->type == type)) | 
|  | return nv_encoder; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static void | 
|  | nouveau_connector_destroy(struct drm_connector *connector) | 
|  | { | 
|  | struct nouveau_connector *nv_connector = nouveau_connector(connector); | 
|  | nvif_event_dtor(&nv_connector->irq); | 
|  | nvif_event_dtor(&nv_connector->hpd); | 
|  | kfree(nv_connector->edid); | 
|  | drm_connector_unregister(connector); | 
|  | drm_connector_cleanup(connector); | 
|  | if (nv_connector->aux.transfer) { | 
|  | drm_dp_cec_unregister_connector(&nv_connector->aux); | 
|  | kfree(nv_connector->aux.name); | 
|  | } | 
|  | nvif_conn_dtor(&nv_connector->conn); | 
|  | kfree(connector); | 
|  | } | 
|  |  | 
|  | static struct nouveau_encoder * | 
|  | nouveau_connector_ddc_detect(struct drm_connector *connector) | 
|  | { | 
|  | struct drm_device *dev = connector->dev; | 
|  | struct pci_dev *pdev = to_pci_dev(dev->dev); | 
|  | struct nouveau_encoder *nv_encoder = NULL, *found = NULL; | 
|  | struct drm_encoder *encoder; | 
|  | int ret; | 
|  | bool switcheroo_ddc = false; | 
|  |  | 
|  | drm_connector_for_each_possible_encoder(connector, encoder) { | 
|  | nv_encoder = nouveau_encoder(encoder); | 
|  |  | 
|  | switch (nv_encoder->dcb->type) { | 
|  | case DCB_OUTPUT_DP: | 
|  | ret = nouveau_dp_detect(nouveau_connector(connector), | 
|  | nv_encoder); | 
|  | if (ret == NOUVEAU_DP_MST) | 
|  | return NULL; | 
|  | else if (ret == NOUVEAU_DP_SST) | 
|  | found = nv_encoder; | 
|  |  | 
|  | break; | 
|  | case DCB_OUTPUT_LVDS: | 
|  | switcheroo_ddc = !!(vga_switcheroo_handler_flags() & | 
|  | VGA_SWITCHEROO_CAN_SWITCH_DDC); | 
|  | fallthrough; | 
|  | default: | 
|  | if (!nv_encoder->i2c) | 
|  | break; | 
|  |  | 
|  | if (switcheroo_ddc) | 
|  | vga_switcheroo_lock_ddc(pdev); | 
|  | if (nvkm_probe_i2c(nv_encoder->i2c, 0x50)) | 
|  | found = nv_encoder; | 
|  | if (switcheroo_ddc) | 
|  | vga_switcheroo_unlock_ddc(pdev); | 
|  |  | 
|  | break; | 
|  | } | 
|  | if (found) | 
|  | break; | 
|  | } | 
|  |  | 
|  | return found; | 
|  | } | 
|  |  | 
|  | static struct nouveau_encoder * | 
|  | nouveau_connector_of_detect(struct drm_connector *connector) | 
|  | { | 
|  | #ifdef __powerpc__ | 
|  | struct drm_device *dev = connector->dev; | 
|  | struct nouveau_connector *nv_connector = nouveau_connector(connector); | 
|  | struct nouveau_encoder *nv_encoder; | 
|  | struct pci_dev *pdev = to_pci_dev(dev->dev); | 
|  | struct device_node *cn, *dn = pci_device_to_OF_node(pdev); | 
|  |  | 
|  | if (!dn || | 
|  | !((nv_encoder = find_encoder(connector, DCB_OUTPUT_TMDS)) || | 
|  | (nv_encoder = find_encoder(connector, DCB_OUTPUT_ANALOG)))) | 
|  | return NULL; | 
|  |  | 
|  | for_each_child_of_node(dn, cn) { | 
|  | const char *name = of_get_property(cn, "name", NULL); | 
|  | const void *edid = of_get_property(cn, "EDID", NULL); | 
|  | int idx = name ? name[strlen(name) - 1] - 'A' : 0; | 
|  |  | 
|  | if (nv_encoder->dcb->i2c_index == idx && edid) { | 
|  | nv_connector->edid = | 
|  | kmemdup(edid, EDID_LENGTH, GFP_KERNEL); | 
|  | of_node_put(cn); | 
|  | return nv_encoder; | 
|  | } | 
|  | } | 
|  | #endif | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static void | 
|  | nouveau_connector_set_encoder(struct drm_connector *connector, | 
|  | struct nouveau_encoder *nv_encoder) | 
|  | { | 
|  | struct nouveau_connector *nv_connector = nouveau_connector(connector); | 
|  | struct nouveau_drm *drm = nouveau_drm(connector->dev); | 
|  | struct drm_device *dev = connector->dev; | 
|  | struct pci_dev *pdev = to_pci_dev(dev->dev); | 
|  |  | 
|  | if (nv_connector->detected_encoder == nv_encoder) | 
|  | return; | 
|  | nv_connector->detected_encoder = nv_encoder; | 
|  |  | 
|  | if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_TESLA) { | 
|  | if (nv_encoder->dcb->type == DCB_OUTPUT_DP) | 
|  | connector->interlace_allowed = | 
|  | nv_encoder->caps.dp_interlace; | 
|  | else | 
|  | connector->interlace_allowed = | 
|  | drm->client.device.info.family < NV_DEVICE_INFO_V0_VOLTA; | 
|  | connector->doublescan_allowed = true; | 
|  | } else | 
|  | if (nv_encoder->dcb->type == DCB_OUTPUT_LVDS || | 
|  | nv_encoder->dcb->type == DCB_OUTPUT_TMDS) { | 
|  | connector->doublescan_allowed = false; | 
|  | connector->interlace_allowed = false; | 
|  | } else { | 
|  | connector->doublescan_allowed = true; | 
|  | if (drm->client.device.info.family == NV_DEVICE_INFO_V0_KELVIN || | 
|  | (drm->client.device.info.family == NV_DEVICE_INFO_V0_CELSIUS && | 
|  | (pdev->device & 0x0ff0) != 0x0100 && | 
|  | (pdev->device & 0x0ff0) != 0x0150)) | 
|  | /* HW is broken */ | 
|  | connector->interlace_allowed = false; | 
|  | else | 
|  | connector->interlace_allowed = true; | 
|  | } | 
|  |  | 
|  | if (nv_connector->type == DCB_CONNECTOR_DVI_I) { | 
|  | drm_object_property_set_value(&connector->base, | 
|  | dev->mode_config.dvi_i_subconnector_property, | 
|  | nv_encoder->dcb->type == DCB_OUTPUT_TMDS ? | 
|  | DRM_MODE_SUBCONNECTOR_DVID : | 
|  | DRM_MODE_SUBCONNECTOR_DVIA); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void | 
|  | nouveau_connector_set_edid(struct nouveau_connector *nv_connector, | 
|  | struct edid *edid) | 
|  | { | 
|  | if (nv_connector->edid != edid) { | 
|  | struct edid *old_edid = nv_connector->edid; | 
|  |  | 
|  | drm_connector_update_edid_property(&nv_connector->base, edid); | 
|  | kfree(old_edid); | 
|  | nv_connector->edid = edid; | 
|  | } | 
|  | } | 
|  |  | 
|  | static enum drm_connector_status | 
|  | nouveau_connector_detect(struct drm_connector *connector, bool force) | 
|  | { | 
|  | struct drm_device *dev = connector->dev; | 
|  | struct nouveau_drm *drm = nouveau_drm(dev); | 
|  | struct nouveau_connector *nv_connector = nouveau_connector(connector); | 
|  | struct nouveau_encoder *nv_encoder = NULL; | 
|  | struct nouveau_encoder *nv_partner; | 
|  | struct i2c_adapter *i2c; | 
|  | int type; | 
|  | int ret; | 
|  | enum drm_connector_status conn_status = connector_status_disconnected; | 
|  |  | 
|  | /* Outputs are only polled while runtime active, so resuming the | 
|  | * device here is unnecessary (and would deadlock upon runtime suspend | 
|  | * because it waits for polling to finish). We do however, want to | 
|  | * prevent the autosuspend timer from elapsing during this operation | 
|  | * if possible. | 
|  | */ | 
|  | if (drm_kms_helper_is_poll_worker()) { | 
|  | pm_runtime_get_noresume(dev->dev); | 
|  | } else { | 
|  | ret = pm_runtime_get_sync(dev->dev); | 
|  | if (ret < 0 && ret != -EACCES) { | 
|  | pm_runtime_put_autosuspend(dev->dev); | 
|  | nouveau_connector_set_edid(nv_connector, NULL); | 
|  | return conn_status; | 
|  | } | 
|  | } | 
|  |  | 
|  | nv_encoder = nouveau_connector_ddc_detect(connector); | 
|  | if (nv_encoder && (i2c = nv_encoder->i2c) != NULL) { | 
|  | struct edid *new_edid; | 
|  |  | 
|  | if ((vga_switcheroo_handler_flags() & | 
|  | VGA_SWITCHEROO_CAN_SWITCH_DDC) && | 
|  | nv_connector->type == DCB_CONNECTOR_LVDS) | 
|  | new_edid = drm_get_edid_switcheroo(connector, i2c); | 
|  | else | 
|  | new_edid = drm_get_edid(connector, i2c); | 
|  |  | 
|  | nouveau_connector_set_edid(nv_connector, new_edid); | 
|  | if (!nv_connector->edid) { | 
|  | NV_ERROR(drm, "DDC responded, but no EDID for %s\n", | 
|  | connector->name); | 
|  | goto detect_analog; | 
|  | } | 
|  |  | 
|  | /* Override encoder type for DVI-I based on whether EDID | 
|  | * says the display is digital or analog, both use the | 
|  | * same i2c channel so the value returned from ddc_detect | 
|  | * isn't necessarily correct. | 
|  | */ | 
|  | nv_partner = NULL; | 
|  | if (nv_encoder->dcb->type == DCB_OUTPUT_TMDS) | 
|  | nv_partner = find_encoder(connector, DCB_OUTPUT_ANALOG); | 
|  | if (nv_encoder->dcb->type == DCB_OUTPUT_ANALOG) | 
|  | nv_partner = find_encoder(connector, DCB_OUTPUT_TMDS); | 
|  |  | 
|  | if (nv_partner && ((nv_encoder->dcb->type == DCB_OUTPUT_ANALOG && | 
|  | nv_partner->dcb->type == DCB_OUTPUT_TMDS) || | 
|  | (nv_encoder->dcb->type == DCB_OUTPUT_TMDS && | 
|  | nv_partner->dcb->type == DCB_OUTPUT_ANALOG))) { | 
|  | if (nv_connector->edid->input & DRM_EDID_INPUT_DIGITAL) | 
|  | type = DCB_OUTPUT_TMDS; | 
|  | else | 
|  | type = DCB_OUTPUT_ANALOG; | 
|  |  | 
|  | nv_encoder = find_encoder(connector, type); | 
|  | } | 
|  |  | 
|  | nouveau_connector_set_encoder(connector, nv_encoder); | 
|  | conn_status = connector_status_connected; | 
|  |  | 
|  | if (nv_encoder->dcb->type == DCB_OUTPUT_DP) | 
|  | drm_dp_cec_set_edid(&nv_connector->aux, nv_connector->edid); | 
|  |  | 
|  | goto out; | 
|  | } else { | 
|  | nouveau_connector_set_edid(nv_connector, NULL); | 
|  | } | 
|  |  | 
|  | nv_encoder = nouveau_connector_of_detect(connector); | 
|  | if (nv_encoder) { | 
|  | nouveau_connector_set_encoder(connector, nv_encoder); | 
|  | conn_status = connector_status_connected; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | detect_analog: | 
|  | nv_encoder = find_encoder(connector, DCB_OUTPUT_ANALOG); | 
|  | if (!nv_encoder && !nouveau_tv_disable) | 
|  | nv_encoder = find_encoder(connector, DCB_OUTPUT_TV); | 
|  | if (nv_encoder && force) { | 
|  | struct drm_encoder *encoder = to_drm_encoder(nv_encoder); | 
|  | const struct drm_encoder_helper_funcs *helper = | 
|  | encoder->helper_private; | 
|  |  | 
|  | if (helper->detect(encoder, connector) == | 
|  | connector_status_connected) { | 
|  | nouveau_connector_set_encoder(connector, nv_encoder); | 
|  | conn_status = connector_status_connected; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | out: | 
|  | if (!nv_connector->edid) | 
|  | drm_dp_cec_unset_edid(&nv_connector->aux); | 
|  |  | 
|  | pm_runtime_mark_last_busy(dev->dev); | 
|  | pm_runtime_put_autosuspend(dev->dev); | 
|  |  | 
|  | return conn_status; | 
|  | } | 
|  |  | 
|  | static enum drm_connector_status | 
|  | nouveau_connector_detect_lvds(struct drm_connector *connector, bool force) | 
|  | { | 
|  | struct drm_device *dev = connector->dev; | 
|  | struct nouveau_drm *drm = nouveau_drm(dev); | 
|  | struct nouveau_connector *nv_connector = nouveau_connector(connector); | 
|  | struct nouveau_encoder *nv_encoder = NULL; | 
|  | struct edid *edid = NULL; | 
|  | enum drm_connector_status status = connector_status_disconnected; | 
|  |  | 
|  | nv_encoder = find_encoder(connector, DCB_OUTPUT_LVDS); | 
|  | if (!nv_encoder) | 
|  | goto out; | 
|  |  | 
|  | /* Try retrieving EDID via DDC */ | 
|  | if (!drm->vbios.fp_no_ddc) { | 
|  | status = nouveau_connector_detect(connector, force); | 
|  | if (status == connector_status_connected) { | 
|  | edid = nv_connector->edid; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* On some laptops (Sony, i'm looking at you) there appears to | 
|  | * be no direct way of accessing the panel's EDID.  The only | 
|  | * option available to us appears to be to ask ACPI for help.. | 
|  | * | 
|  | * It's important this check's before trying straps, one of the | 
|  | * said manufacturer's laptops are configured in such a way | 
|  | * the nouveau decides an entry in the VBIOS FP mode table is | 
|  | * valid - it's not (rh#613284) | 
|  | */ | 
|  | if (nv_encoder->dcb->lvdsconf.use_acpi_for_edid) { | 
|  | edid = nouveau_acpi_edid(dev, connector); | 
|  | if (edid) { | 
|  | status = connector_status_connected; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* If no EDID found above, and the VBIOS indicates a hardcoded | 
|  | * modeline is avalilable for the panel, set it as the panel's | 
|  | * native mode and exit. | 
|  | */ | 
|  | if (nouveau_bios_fp_mode(dev, NULL) && (drm->vbios.fp_no_ddc || | 
|  | nv_encoder->dcb->lvdsconf.use_straps_for_mode)) { | 
|  | status = connector_status_connected; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Still nothing, some VBIOS images have a hardcoded EDID block | 
|  | * stored for the panel stored in them. | 
|  | */ | 
|  | if (!drm->vbios.fp_no_ddc) { | 
|  | edid = (struct edid *)nouveau_bios_embedded_edid(dev); | 
|  | if (edid) { | 
|  | edid = kmemdup(edid, EDID_LENGTH, GFP_KERNEL); | 
|  | if (edid) | 
|  | status = connector_status_connected; | 
|  | } | 
|  | } | 
|  |  | 
|  | out: | 
|  | #if defined(CONFIG_ACPI_BUTTON) || \ | 
|  | (defined(CONFIG_ACPI_BUTTON_MODULE) && defined(MODULE)) | 
|  | if (status == connector_status_connected && | 
|  | !nouveau_ignorelid && !acpi_lid_open()) | 
|  | status = connector_status_unknown; | 
|  | #endif | 
|  |  | 
|  | nouveau_connector_set_edid(nv_connector, edid); | 
|  | if (nv_encoder) | 
|  | nouveau_connector_set_encoder(connector, nv_encoder); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static void | 
|  | nouveau_connector_force(struct drm_connector *connector) | 
|  | { | 
|  | struct nouveau_drm *drm = nouveau_drm(connector->dev); | 
|  | struct nouveau_connector *nv_connector = nouveau_connector(connector); | 
|  | struct nouveau_encoder *nv_encoder; | 
|  | int type; | 
|  |  | 
|  | if (nv_connector->type == DCB_CONNECTOR_DVI_I) { | 
|  | if (connector->force == DRM_FORCE_ON_DIGITAL) | 
|  | type = DCB_OUTPUT_TMDS; | 
|  | else | 
|  | type = DCB_OUTPUT_ANALOG; | 
|  | } else | 
|  | type = DCB_OUTPUT_ANY; | 
|  |  | 
|  | nv_encoder = find_encoder(connector, type); | 
|  | if (!nv_encoder) { | 
|  | NV_ERROR(drm, "can't find encoder to force %s on!\n", | 
|  | connector->name); | 
|  | connector->status = connector_status_disconnected; | 
|  | return; | 
|  | } | 
|  |  | 
|  | nouveau_connector_set_encoder(connector, nv_encoder); | 
|  | } | 
|  |  | 
|  | static int | 
|  | nouveau_connector_set_property(struct drm_connector *connector, | 
|  | struct drm_property *property, uint64_t value) | 
|  | { | 
|  | struct nouveau_connector *nv_connector = nouveau_connector(connector); | 
|  | struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder; | 
|  | struct nouveau_conn_atom *asyc = &nv_connector->properties_state; | 
|  | struct drm_encoder *encoder = to_drm_encoder(nv_encoder); | 
|  | int ret; | 
|  |  | 
|  | ret = connector->funcs->atomic_set_property(&nv_connector->base, | 
|  | &asyc->state, | 
|  | property, value); | 
|  | if (ret) { | 
|  | if (nv_encoder && nv_encoder->dcb->type == DCB_OUTPUT_TV) | 
|  | return get_slave_funcs(encoder)->set_property( | 
|  | encoder, connector, property, value); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | nv_connector->scaling_mode = asyc->scaler.mode; | 
|  | nv_connector->dithering_mode = asyc->dither.mode; | 
|  |  | 
|  | if (connector->encoder && connector->encoder->crtc) { | 
|  | ret = drm_crtc_helper_set_mode(connector->encoder->crtc, | 
|  | &connector->encoder->crtc->mode, | 
|  | connector->encoder->crtc->x, | 
|  | connector->encoder->crtc->y, | 
|  | NULL); | 
|  | if (!ret) | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | struct moderec { | 
|  | int hdisplay; | 
|  | int vdisplay; | 
|  | }; | 
|  |  | 
|  | static struct moderec scaler_modes[] = { | 
|  | { 1920, 1200 }, | 
|  | { 1920, 1080 }, | 
|  | { 1680, 1050 }, | 
|  | { 1600, 1200 }, | 
|  | { 1400, 1050 }, | 
|  | { 1280, 1024 }, | 
|  | { 1280, 960 }, | 
|  | { 1152, 864 }, | 
|  | { 1024, 768 }, | 
|  | { 800, 600 }, | 
|  | { 720, 400 }, | 
|  | { 640, 480 }, | 
|  | { 640, 400 }, | 
|  | { 640, 350 }, | 
|  | {} | 
|  | }; | 
|  |  | 
|  | static int | 
|  | nouveau_connector_scaler_modes_add(struct drm_connector *connector) | 
|  | { | 
|  | struct nouveau_connector *nv_connector = nouveau_connector(connector); | 
|  | struct drm_display_mode *native = nv_connector->native_mode, *m; | 
|  | struct drm_device *dev = connector->dev; | 
|  | struct moderec *mode = &scaler_modes[0]; | 
|  | int modes = 0; | 
|  |  | 
|  | if (!native) | 
|  | return 0; | 
|  |  | 
|  | while (mode->hdisplay) { | 
|  | if (mode->hdisplay <= native->hdisplay && | 
|  | mode->vdisplay <= native->vdisplay && | 
|  | (mode->hdisplay != native->hdisplay || | 
|  | mode->vdisplay != native->vdisplay)) { | 
|  | m = drm_cvt_mode(dev, mode->hdisplay, mode->vdisplay, | 
|  | drm_mode_vrefresh(native), false, | 
|  | false, false); | 
|  | if (!m) | 
|  | continue; | 
|  |  | 
|  | drm_mode_probed_add(connector, m); | 
|  | modes++; | 
|  | } | 
|  |  | 
|  | mode++; | 
|  | } | 
|  |  | 
|  | return modes; | 
|  | } | 
|  |  | 
|  | static void | 
|  | nouveau_connector_detect_depth(struct drm_connector *connector) | 
|  | { | 
|  | struct nouveau_drm *drm = nouveau_drm(connector->dev); | 
|  | struct nouveau_connector *nv_connector = nouveau_connector(connector); | 
|  | struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder; | 
|  | struct nvbios *bios = &drm->vbios; | 
|  | struct drm_display_mode *mode = nv_connector->native_mode; | 
|  | bool duallink; | 
|  |  | 
|  | /* if the edid is feeling nice enough to provide this info, use it */ | 
|  | if (nv_connector->edid && connector->display_info.bpc) | 
|  | return; | 
|  |  | 
|  | /* EDID 1.4 is *supposed* to be supported on eDP, but, Apple... */ | 
|  | if (nv_connector->type == DCB_CONNECTOR_eDP) { | 
|  | connector->display_info.bpc = 6; | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* we're out of options unless we're LVDS, default to 8bpc */ | 
|  | if (nv_encoder->dcb->type != DCB_OUTPUT_LVDS) { | 
|  | connector->display_info.bpc = 8; | 
|  | return; | 
|  | } | 
|  |  | 
|  | connector->display_info.bpc = 6; | 
|  |  | 
|  | /* LVDS: panel straps */ | 
|  | if (bios->fp_no_ddc) { | 
|  | if (bios->fp.if_is_24bit) | 
|  | connector->display_info.bpc = 8; | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* LVDS: DDC panel, need to first determine the number of links to | 
|  | * know which if_is_24bit flag to check... | 
|  | */ | 
|  | if (nv_connector->edid && | 
|  | nv_connector->type == DCB_CONNECTOR_LVDS_SPWG) | 
|  | duallink = ((u8 *)nv_connector->edid)[121] == 2; | 
|  | else | 
|  | duallink = mode->clock >= bios->fp.duallink_transition_clk; | 
|  |  | 
|  | if ((!duallink && (bios->fp.strapless_is_24bit & 1)) || | 
|  | ( duallink && (bios->fp.strapless_is_24bit & 2))) | 
|  | connector->display_info.bpc = 8; | 
|  | } | 
|  |  | 
|  | static int | 
|  | nouveau_connector_late_register(struct drm_connector *connector) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = nouveau_backlight_init(connector); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (connector->connector_type == DRM_MODE_CONNECTOR_eDP || | 
|  | connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort) { | 
|  | ret = drm_dp_aux_register(&nouveau_connector(connector)->aux); | 
|  | if (ret) | 
|  | goto backlight_fini; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | backlight_fini: | 
|  | nouveau_backlight_fini(connector); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void | 
|  | nouveau_connector_early_unregister(struct drm_connector *connector) | 
|  | { | 
|  | if (connector->connector_type == DRM_MODE_CONNECTOR_eDP || | 
|  | connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort) | 
|  | drm_dp_aux_unregister(&nouveau_connector(connector)->aux); | 
|  |  | 
|  | nouveau_backlight_fini(connector); | 
|  | } | 
|  |  | 
|  | static int | 
|  | nouveau_connector_get_modes(struct drm_connector *connector) | 
|  | { | 
|  | struct drm_device *dev = connector->dev; | 
|  | struct nouveau_drm *drm = nouveau_drm(dev); | 
|  | struct nouveau_connector *nv_connector = nouveau_connector(connector); | 
|  | struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder; | 
|  | struct drm_encoder *encoder = to_drm_encoder(nv_encoder); | 
|  | int ret = 0; | 
|  |  | 
|  | /* destroy the native mode, the attached monitor could have changed. | 
|  | */ | 
|  | if (nv_connector->native_mode) { | 
|  | drm_mode_destroy(dev, nv_connector->native_mode); | 
|  | nv_connector->native_mode = NULL; | 
|  | } | 
|  |  | 
|  | if (nv_connector->edid) | 
|  | ret = drm_add_edid_modes(connector, nv_connector->edid); | 
|  | else | 
|  | if (nv_encoder->dcb->type == DCB_OUTPUT_LVDS && | 
|  | (nv_encoder->dcb->lvdsconf.use_straps_for_mode || | 
|  | drm->vbios.fp_no_ddc) && nouveau_bios_fp_mode(dev, NULL)) { | 
|  | struct drm_display_mode mode; | 
|  |  | 
|  | nouveau_bios_fp_mode(dev, &mode); | 
|  | nv_connector->native_mode = drm_mode_duplicate(dev, &mode); | 
|  | } | 
|  |  | 
|  | /* Determine display colour depth for everything except LVDS now, | 
|  | * DP requires this before mode_valid() is called. | 
|  | */ | 
|  | if (connector->connector_type != DRM_MODE_CONNECTOR_LVDS) | 
|  | nouveau_connector_detect_depth(connector); | 
|  |  | 
|  | /* Find the native mode if this is a digital panel, if we didn't | 
|  | * find any modes through DDC previously add the native mode to | 
|  | * the list of modes. | 
|  | */ | 
|  | if (!nv_connector->native_mode) | 
|  | nv_connector->native_mode = nouveau_conn_native_mode(connector); | 
|  | if (ret == 0 && nv_connector->native_mode) { | 
|  | struct drm_display_mode *mode; | 
|  |  | 
|  | mode = drm_mode_duplicate(dev, nv_connector->native_mode); | 
|  | if (!mode) | 
|  | return 0; | 
|  |  | 
|  | drm_mode_probed_add(connector, mode); | 
|  | ret = 1; | 
|  | } | 
|  |  | 
|  | /* Determine LVDS colour depth, must happen after determining | 
|  | * "native" mode as some VBIOS tables require us to use the | 
|  | * pixel clock as part of the lookup... | 
|  | */ | 
|  | if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS && nv_connector->native_mode) | 
|  | nouveau_connector_detect_depth(connector); | 
|  |  | 
|  | if (nv_encoder->dcb->type == DCB_OUTPUT_TV) | 
|  | ret = get_slave_funcs(encoder)->get_modes(encoder, connector); | 
|  |  | 
|  | if (nv_connector->type == DCB_CONNECTOR_LVDS || | 
|  | nv_connector->type == DCB_CONNECTOR_LVDS_SPWG || | 
|  | nv_connector->type == DCB_CONNECTOR_eDP) | 
|  | ret += nouveau_connector_scaler_modes_add(connector); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static unsigned | 
|  | get_tmds_link_bandwidth(struct drm_connector *connector) | 
|  | { | 
|  | struct nouveau_connector *nv_connector = nouveau_connector(connector); | 
|  | struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder; | 
|  | struct nouveau_drm *drm = nouveau_drm(connector->dev); | 
|  | struct dcb_output *dcb = nv_connector->detected_encoder->dcb; | 
|  | struct drm_display_info *info = NULL; | 
|  | unsigned duallink_scale = | 
|  | nouveau_duallink && nv_encoder->dcb->duallink_possible ? 2 : 1; | 
|  |  | 
|  | if (drm_detect_hdmi_monitor(nv_connector->edid)) { | 
|  | info = &nv_connector->base.display_info; | 
|  | duallink_scale = 1; | 
|  | } | 
|  |  | 
|  | if (info) { | 
|  | if (nouveau_hdmimhz > 0) | 
|  | return nouveau_hdmimhz * 1000; | 
|  | /* Note: these limits are conservative, some Fermi's | 
|  | * can do 297 MHz. Unclear how this can be determined. | 
|  | */ | 
|  | if (drm->client.device.info.chipset >= 0x120) { | 
|  | const int max_tmds_clock = | 
|  | info->hdmi.scdc.scrambling.supported ? | 
|  | 594000 : 340000; | 
|  | return info->max_tmds_clock ? | 
|  | min(info->max_tmds_clock, max_tmds_clock) : | 
|  | max_tmds_clock; | 
|  | } | 
|  | if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_KEPLER) | 
|  | return 297000; | 
|  | if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_FERMI) | 
|  | return 225000; | 
|  | } | 
|  |  | 
|  | if (dcb->location != DCB_LOC_ON_CHIP || | 
|  | drm->client.device.info.chipset >= 0x46) | 
|  | return 165000 * duallink_scale; | 
|  | else if (drm->client.device.info.chipset >= 0x40) | 
|  | return 155000 * duallink_scale; | 
|  | else if (drm->client.device.info.chipset >= 0x18) | 
|  | return 135000 * duallink_scale; | 
|  | else | 
|  | return 112000 * duallink_scale; | 
|  | } | 
|  |  | 
|  | static enum drm_mode_status | 
|  | nouveau_connector_mode_valid(struct drm_connector *connector, | 
|  | struct drm_display_mode *mode) | 
|  | { | 
|  | struct nouveau_connector *nv_connector = nouveau_connector(connector); | 
|  | struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder; | 
|  | struct drm_encoder *encoder = to_drm_encoder(nv_encoder); | 
|  | unsigned int min_clock = 25000, max_clock = min_clock, clock = mode->clock; | 
|  |  | 
|  | switch (nv_encoder->dcb->type) { | 
|  | case DCB_OUTPUT_LVDS: | 
|  | if (nv_connector->native_mode && | 
|  | (mode->hdisplay > nv_connector->native_mode->hdisplay || | 
|  | mode->vdisplay > nv_connector->native_mode->vdisplay)) | 
|  | return MODE_PANEL; | 
|  |  | 
|  | min_clock = 0; | 
|  | max_clock = 400000; | 
|  | break; | 
|  | case DCB_OUTPUT_TMDS: | 
|  | max_clock = get_tmds_link_bandwidth(connector); | 
|  | break; | 
|  | case DCB_OUTPUT_ANALOG: | 
|  | max_clock = nv_encoder->dcb->crtconf.maxfreq; | 
|  | if (!max_clock) | 
|  | max_clock = 350000; | 
|  | break; | 
|  | case DCB_OUTPUT_TV: | 
|  | return get_slave_funcs(encoder)->mode_valid(encoder, mode); | 
|  | case DCB_OUTPUT_DP: | 
|  | return nv50_dp_mode_valid(nv_encoder, mode, NULL); | 
|  | default: | 
|  | BUG(); | 
|  | return MODE_BAD; | 
|  | } | 
|  |  | 
|  | if ((mode->flags & DRM_MODE_FLAG_3D_MASK) == DRM_MODE_FLAG_3D_FRAME_PACKING) | 
|  | clock *= 2; | 
|  |  | 
|  | if (clock < min_clock) | 
|  | return MODE_CLOCK_LOW; | 
|  | if (clock > max_clock) | 
|  | return MODE_CLOCK_HIGH; | 
|  |  | 
|  | return MODE_OK; | 
|  | } | 
|  |  | 
|  | static struct drm_encoder * | 
|  | nouveau_connector_best_encoder(struct drm_connector *connector) | 
|  | { | 
|  | struct nouveau_connector *nv_connector = nouveau_connector(connector); | 
|  |  | 
|  | if (nv_connector->detected_encoder) | 
|  | return to_drm_encoder(nv_connector->detected_encoder); | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static int | 
|  | nouveau_connector_atomic_check(struct drm_connector *connector, struct drm_atomic_state *state) | 
|  | { | 
|  | struct nouveau_connector *nv_conn = nouveau_connector(connector); | 
|  | struct drm_connector_state *conn_state = | 
|  | drm_atomic_get_new_connector_state(state, connector); | 
|  |  | 
|  | if (!nv_conn->dp_encoder || !nv50_has_mst(nouveau_drm(connector->dev))) | 
|  | return 0; | 
|  |  | 
|  | return drm_dp_mst_root_conn_atomic_check(conn_state, &nv_conn->dp_encoder->dp.mstm->mgr); | 
|  | } | 
|  |  | 
|  | static const struct drm_connector_helper_funcs | 
|  | nouveau_connector_helper_funcs = { | 
|  | .get_modes = nouveau_connector_get_modes, | 
|  | .mode_valid = nouveau_connector_mode_valid, | 
|  | .best_encoder = nouveau_connector_best_encoder, | 
|  | .atomic_check = nouveau_connector_atomic_check, | 
|  | }; | 
|  |  | 
|  | static const struct drm_connector_funcs | 
|  | nouveau_connector_funcs = { | 
|  | .dpms = drm_helper_connector_dpms, | 
|  | .reset = nouveau_conn_reset, | 
|  | .detect = nouveau_connector_detect, | 
|  | .force = nouveau_connector_force, | 
|  | .fill_modes = drm_helper_probe_single_connector_modes, | 
|  | .set_property = nouveau_connector_set_property, | 
|  | .destroy = nouveau_connector_destroy, | 
|  | .atomic_duplicate_state = nouveau_conn_atomic_duplicate_state, | 
|  | .atomic_destroy_state = nouveau_conn_atomic_destroy_state, | 
|  | .atomic_set_property = nouveau_conn_atomic_set_property, | 
|  | .atomic_get_property = nouveau_conn_atomic_get_property, | 
|  | .late_register = nouveau_connector_late_register, | 
|  | .early_unregister = nouveau_connector_early_unregister, | 
|  | }; | 
|  |  | 
|  | static const struct drm_connector_funcs | 
|  | nouveau_connector_funcs_lvds = { | 
|  | .dpms = drm_helper_connector_dpms, | 
|  | .reset = nouveau_conn_reset, | 
|  | .detect = nouveau_connector_detect_lvds, | 
|  | .force = nouveau_connector_force, | 
|  | .fill_modes = drm_helper_probe_single_connector_modes, | 
|  | .set_property = nouveau_connector_set_property, | 
|  | .destroy = nouveau_connector_destroy, | 
|  | .atomic_duplicate_state = nouveau_conn_atomic_duplicate_state, | 
|  | .atomic_destroy_state = nouveau_conn_atomic_destroy_state, | 
|  | .atomic_set_property = nouveau_conn_atomic_set_property, | 
|  | .atomic_get_property = nouveau_conn_atomic_get_property, | 
|  | .late_register = nouveau_connector_late_register, | 
|  | .early_unregister = nouveau_connector_early_unregister, | 
|  | }; | 
|  |  | 
|  | void | 
|  | nouveau_connector_hpd(struct nouveau_connector *nv_connector, u64 bits) | 
|  | { | 
|  | struct nouveau_drm *drm = nouveau_drm(nv_connector->base.dev); | 
|  | u32 mask = drm_connector_mask(&nv_connector->base); | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&drm->hpd_lock, flags); | 
|  | if (!(drm->hpd_pending & mask)) { | 
|  | nv_connector->hpd_pending |= bits; | 
|  | drm->hpd_pending |= mask; | 
|  | schedule_work(&drm->hpd_work); | 
|  | } | 
|  | spin_unlock_irqrestore(&drm->hpd_lock, flags); | 
|  | } | 
|  |  | 
|  | static int | 
|  | nouveau_connector_irq(struct nvif_event *event, void *repv, u32 repc) | 
|  | { | 
|  | struct nouveau_connector *nv_connector = container_of(event, typeof(*nv_connector), irq); | 
|  |  | 
|  | schedule_work(&nv_connector->irq_work); | 
|  | return NVIF_EVENT_KEEP; | 
|  | } | 
|  |  | 
|  | static int | 
|  | nouveau_connector_hotplug(struct nvif_event *event, void *repv, u32 repc) | 
|  | { | 
|  | struct nouveau_connector *nv_connector = container_of(event, typeof(*nv_connector), hpd); | 
|  | struct nvif_conn_event_v0 *rep = repv; | 
|  |  | 
|  | nouveau_connector_hpd(nv_connector, rep->types); | 
|  | return NVIF_EVENT_KEEP; | 
|  | } | 
|  |  | 
|  | static ssize_t | 
|  | nouveau_connector_aux_xfer(struct drm_dp_aux *obj, struct drm_dp_aux_msg *msg) | 
|  | { | 
|  | struct nouveau_connector *nv_connector = | 
|  | container_of(obj, typeof(*nv_connector), aux); | 
|  | struct nouveau_encoder *nv_encoder; | 
|  | struct nvkm_i2c_aux *aux; | 
|  | u8 size = msg->size; | 
|  | int ret; | 
|  |  | 
|  | nv_encoder = find_encoder(&nv_connector->base, DCB_OUTPUT_DP); | 
|  | if (!nv_encoder || !(aux = nv_encoder->aux)) | 
|  | return -ENODEV; | 
|  | if (WARN_ON(msg->size > 16)) | 
|  | return -E2BIG; | 
|  |  | 
|  | ret = nvkm_i2c_aux_acquire(aux); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = nvkm_i2c_aux_xfer(aux, false, msg->request, msg->address, | 
|  | msg->buffer, &size); | 
|  | nvkm_i2c_aux_release(aux); | 
|  | if (ret >= 0) { | 
|  | msg->reply = ret; | 
|  | return size; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int | 
|  | drm_conntype_from_dcb(enum dcb_connector_type dcb) | 
|  | { | 
|  | switch (dcb) { | 
|  | case DCB_CONNECTOR_VGA      : return DRM_MODE_CONNECTOR_VGA; | 
|  | case DCB_CONNECTOR_TV_0     : | 
|  | case DCB_CONNECTOR_TV_1     : | 
|  | case DCB_CONNECTOR_TV_3     : return DRM_MODE_CONNECTOR_TV; | 
|  | case DCB_CONNECTOR_DMS59_0  : | 
|  | case DCB_CONNECTOR_DMS59_1  : | 
|  | case DCB_CONNECTOR_DVI_I    : return DRM_MODE_CONNECTOR_DVII; | 
|  | case DCB_CONNECTOR_DVI_D    : return DRM_MODE_CONNECTOR_DVID; | 
|  | case DCB_CONNECTOR_LVDS     : | 
|  | case DCB_CONNECTOR_LVDS_SPWG: return DRM_MODE_CONNECTOR_LVDS; | 
|  | case DCB_CONNECTOR_DMS59_DP0: | 
|  | case DCB_CONNECTOR_DMS59_DP1: | 
|  | case DCB_CONNECTOR_DP       : | 
|  | case DCB_CONNECTOR_mDP      : | 
|  | case DCB_CONNECTOR_USB_C    : return DRM_MODE_CONNECTOR_DisplayPort; | 
|  | case DCB_CONNECTOR_eDP      : return DRM_MODE_CONNECTOR_eDP; | 
|  | case DCB_CONNECTOR_HDMI_0   : | 
|  | case DCB_CONNECTOR_HDMI_1   : | 
|  | case DCB_CONNECTOR_HDMI_C   : return DRM_MODE_CONNECTOR_HDMIA; | 
|  | case DCB_CONNECTOR_WFD	    : return DRM_MODE_CONNECTOR_VIRTUAL; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | return DRM_MODE_CONNECTOR_Unknown; | 
|  | } | 
|  |  | 
|  | struct drm_connector * | 
|  | nouveau_connector_create(struct drm_device *dev, | 
|  | const struct dcb_output *dcbe) | 
|  | { | 
|  | const struct drm_connector_funcs *funcs = &nouveau_connector_funcs; | 
|  | struct nouveau_drm *drm = nouveau_drm(dev); | 
|  | struct nouveau_display *disp = nouveau_display(dev); | 
|  | struct nouveau_connector *nv_connector = NULL; | 
|  | struct drm_connector *connector; | 
|  | struct drm_connector_list_iter conn_iter; | 
|  | char aux_name[48] = {0}; | 
|  | int index = dcbe->connector; | 
|  | int type, ret = 0; | 
|  | bool dummy; | 
|  |  | 
|  | drm_connector_list_iter_begin(dev, &conn_iter); | 
|  | nouveau_for_each_non_mst_connector_iter(connector, &conn_iter) { | 
|  | nv_connector = nouveau_connector(connector); | 
|  | if (nv_connector->index == index) { | 
|  | drm_connector_list_iter_end(&conn_iter); | 
|  | return connector; | 
|  | } | 
|  | } | 
|  | drm_connector_list_iter_end(&conn_iter); | 
|  |  | 
|  | nv_connector = kzalloc(sizeof(*nv_connector), GFP_KERNEL); | 
|  | if (!nv_connector) | 
|  | return ERR_PTR(-ENOMEM); | 
|  |  | 
|  | connector = &nv_connector->base; | 
|  | nv_connector->index = index; | 
|  | INIT_WORK(&nv_connector->irq_work, nouveau_dp_irq); | 
|  |  | 
|  | /* attempt to parse vbios connector type and hotplug gpio */ | 
|  | nv_connector->dcb = olddcb_conn(dev, index); | 
|  | if (nv_connector->dcb) { | 
|  | u32 entry = ROM16(nv_connector->dcb[0]); | 
|  | if (olddcb_conntab(dev)[3] >= 4) | 
|  | entry |= (u32)ROM16(nv_connector->dcb[2]) << 16; | 
|  |  | 
|  | nv_connector->type = nv_connector->dcb[0]; | 
|  | if (drm_conntype_from_dcb(nv_connector->type) == | 
|  | DRM_MODE_CONNECTOR_Unknown) { | 
|  | NV_WARN(drm, "unknown connector type %02x\n", | 
|  | nv_connector->type); | 
|  | nv_connector->type = DCB_CONNECTOR_NONE; | 
|  | } | 
|  |  | 
|  | /* Gigabyte NX85T */ | 
|  | if (nv_match_device(dev, 0x0421, 0x1458, 0x344c)) { | 
|  | if (nv_connector->type == DCB_CONNECTOR_HDMI_1) | 
|  | nv_connector->type = DCB_CONNECTOR_DVI_I; | 
|  | } | 
|  |  | 
|  | /* Gigabyte GV-NX86T512H */ | 
|  | if (nv_match_device(dev, 0x0402, 0x1458, 0x3455)) { | 
|  | if (nv_connector->type == DCB_CONNECTOR_HDMI_1) | 
|  | nv_connector->type = DCB_CONNECTOR_DVI_I; | 
|  | } | 
|  | } else { | 
|  | nv_connector->type = DCB_CONNECTOR_NONE; | 
|  | } | 
|  |  | 
|  | /* no vbios data, or an unknown dcb connector type - attempt to | 
|  | * figure out something suitable ourselves | 
|  | */ | 
|  | if (nv_connector->type == DCB_CONNECTOR_NONE) { | 
|  | struct nouveau_drm *drm = nouveau_drm(dev); | 
|  | struct dcb_table *dcbt = &drm->vbios.dcb; | 
|  | u32 encoders = 0; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < dcbt->entries; i++) { | 
|  | if (dcbt->entry[i].connector == nv_connector->index) | 
|  | encoders |= (1 << dcbt->entry[i].type); | 
|  | } | 
|  |  | 
|  | if (encoders & (1 << DCB_OUTPUT_DP)) { | 
|  | if (encoders & (1 << DCB_OUTPUT_TMDS)) | 
|  | nv_connector->type = DCB_CONNECTOR_DP; | 
|  | else | 
|  | nv_connector->type = DCB_CONNECTOR_eDP; | 
|  | } else | 
|  | if (encoders & (1 << DCB_OUTPUT_TMDS)) { | 
|  | if (encoders & (1 << DCB_OUTPUT_ANALOG)) | 
|  | nv_connector->type = DCB_CONNECTOR_DVI_I; | 
|  | else | 
|  | nv_connector->type = DCB_CONNECTOR_DVI_D; | 
|  | } else | 
|  | if (encoders & (1 << DCB_OUTPUT_ANALOG)) { | 
|  | nv_connector->type = DCB_CONNECTOR_VGA; | 
|  | } else | 
|  | if (encoders & (1 << DCB_OUTPUT_LVDS)) { | 
|  | nv_connector->type = DCB_CONNECTOR_LVDS; | 
|  | } else | 
|  | if (encoders & (1 << DCB_OUTPUT_TV)) { | 
|  | nv_connector->type = DCB_CONNECTOR_TV_0; | 
|  | } | 
|  | } | 
|  |  | 
|  | switch ((type = drm_conntype_from_dcb(nv_connector->type))) { | 
|  | case DRM_MODE_CONNECTOR_LVDS: | 
|  | ret = nouveau_bios_parse_lvds_table(dev, 0, &dummy, &dummy); | 
|  | if (ret) { | 
|  | NV_ERROR(drm, "Error parsing LVDS table, disabling\n"); | 
|  | kfree(nv_connector); | 
|  | return ERR_PTR(ret); | 
|  | } | 
|  |  | 
|  | funcs = &nouveau_connector_funcs_lvds; | 
|  | break; | 
|  | case DRM_MODE_CONNECTOR_DisplayPort: | 
|  | case DRM_MODE_CONNECTOR_eDP: | 
|  | nv_connector->aux.dev = connector->kdev; | 
|  | nv_connector->aux.drm_dev = dev; | 
|  | nv_connector->aux.transfer = nouveau_connector_aux_xfer; | 
|  | snprintf(aux_name, sizeof(aux_name), "sor-%04x-%04x", | 
|  | dcbe->hasht, dcbe->hashm); | 
|  | nv_connector->aux.name = kstrdup(aux_name, GFP_KERNEL); | 
|  | if (!nv_connector->aux.name) { | 
|  | kfree(nv_connector); | 
|  | return ERR_PTR(-ENOMEM); | 
|  | } | 
|  | drm_dp_aux_init(&nv_connector->aux); | 
|  | break; | 
|  | default: | 
|  | funcs = &nouveau_connector_funcs; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* HDMI 3D support */ | 
|  | if ((disp->disp.object.oclass >= G82_DISP) | 
|  | && ((type == DRM_MODE_CONNECTOR_DisplayPort) | 
|  | || (type == DRM_MODE_CONNECTOR_eDP) | 
|  | || (type == DRM_MODE_CONNECTOR_HDMIA))) | 
|  | connector->stereo_allowed = true; | 
|  |  | 
|  | /* defaults, will get overridden in detect() */ | 
|  | connector->interlace_allowed = false; | 
|  | connector->doublescan_allowed = false; | 
|  |  | 
|  | drm_connector_init(dev, connector, funcs, type); | 
|  | drm_connector_helper_add(connector, &nouveau_connector_helper_funcs); | 
|  | connector->polled = DRM_CONNECTOR_POLL_CONNECT; | 
|  |  | 
|  | if (nv_connector->dcb && (disp->disp.conn_mask & BIT(nv_connector->index))) { | 
|  | ret = nvif_conn_ctor(&disp->disp, nv_connector->base.name, nv_connector->index, | 
|  | &nv_connector->conn); | 
|  | if (ret) { | 
|  | goto drm_conn_err; | 
|  | } | 
|  |  | 
|  | ret = nvif_conn_event_ctor(&nv_connector->conn, "kmsHotplug", | 
|  | nouveau_connector_hotplug, | 
|  | NVIF_CONN_EVENT_V0_PLUG | NVIF_CONN_EVENT_V0_UNPLUG, | 
|  | &nv_connector->hpd); | 
|  | if (ret == 0) | 
|  | connector->polled = DRM_CONNECTOR_POLL_HPD; | 
|  |  | 
|  | if (nv_connector->aux.transfer) { | 
|  | ret = nvif_conn_event_ctor(&nv_connector->conn, "kmsDpIrq", | 
|  | nouveau_connector_irq, NVIF_CONN_EVENT_V0_IRQ, | 
|  | &nv_connector->irq); | 
|  | if (ret) { | 
|  | nvif_event_dtor(&nv_connector->hpd); | 
|  | nvif_conn_dtor(&nv_connector->conn); | 
|  | goto drm_conn_err; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | connector->funcs->reset(connector); | 
|  | nouveau_conn_attach_properties(connector); | 
|  |  | 
|  | /* Default scaling mode */ | 
|  | switch (nv_connector->type) { | 
|  | case DCB_CONNECTOR_LVDS: | 
|  | case DCB_CONNECTOR_LVDS_SPWG: | 
|  | case DCB_CONNECTOR_eDP: | 
|  | /* see note in nouveau_connector_set_property() */ | 
|  | if (disp->disp.object.oclass < NV50_DISP) { | 
|  | nv_connector->scaling_mode = DRM_MODE_SCALE_FULLSCREEN; | 
|  | break; | 
|  | } | 
|  | nv_connector->scaling_mode = DRM_MODE_SCALE_NONE; | 
|  | break; | 
|  | default: | 
|  | nv_connector->scaling_mode = DRM_MODE_SCALE_NONE; | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* dithering properties */ | 
|  | switch (nv_connector->type) { | 
|  | case DCB_CONNECTOR_TV_0: | 
|  | case DCB_CONNECTOR_TV_1: | 
|  | case DCB_CONNECTOR_TV_3: | 
|  | case DCB_CONNECTOR_VGA: | 
|  | break; | 
|  | default: | 
|  | nv_connector->dithering_mode = DITHERING_MODE_AUTO; | 
|  | break; | 
|  | } | 
|  |  | 
|  | switch (type) { | 
|  | case DRM_MODE_CONNECTOR_DisplayPort: | 
|  | nv_connector->dp_encoder = find_encoder(&nv_connector->base, DCB_OUTPUT_DP); | 
|  | fallthrough; | 
|  | case DRM_MODE_CONNECTOR_eDP: | 
|  | drm_dp_cec_register_connector(&nv_connector->aux, connector); | 
|  | break; | 
|  | } | 
|  |  | 
|  | drm_connector_register(connector); | 
|  | return connector; | 
|  |  | 
|  | drm_conn_err: | 
|  | drm_connector_cleanup(connector); | 
|  | kfree(nv_connector); | 
|  | return ERR_PTR(ret); | 
|  | } |