|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | Copyright (c) 2013-2014 Intel Corp. | 
|  |  | 
|  | */ | 
|  |  | 
|  | #include <linux/if_arp.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/debugfs.h> | 
|  |  | 
|  | #include <net/ipv6.h> | 
|  | #include <net/ip6_route.h> | 
|  | #include <net/addrconf.h> | 
|  | #include <net/pkt_sched.h> | 
|  |  | 
|  | #include <net/bluetooth/bluetooth.h> | 
|  | #include <net/bluetooth/hci_core.h> | 
|  | #include <net/bluetooth/l2cap.h> | 
|  |  | 
|  | #include <net/6lowpan.h> /* for the compression support */ | 
|  |  | 
|  | #define VERSION "0.1" | 
|  |  | 
|  | static struct dentry *lowpan_enable_debugfs; | 
|  | static struct dentry *lowpan_control_debugfs; | 
|  |  | 
|  | #define IFACE_NAME_TEMPLATE "bt%d" | 
|  |  | 
|  | struct skb_cb { | 
|  | struct in6_addr addr; | 
|  | struct in6_addr gw; | 
|  | struct l2cap_chan *chan; | 
|  | }; | 
|  | #define lowpan_cb(skb) ((struct skb_cb *)((skb)->cb)) | 
|  |  | 
|  | /* The devices list contains those devices that we are acting | 
|  | * as a proxy. The BT 6LoWPAN device is a virtual device that | 
|  | * connects to the Bluetooth LE device. The real connection to | 
|  | * BT device is done via l2cap layer. There exists one | 
|  | * virtual device / one BT 6LoWPAN network (=hciX device). | 
|  | * The list contains struct lowpan_dev elements. | 
|  | */ | 
|  | static LIST_HEAD(bt_6lowpan_devices); | 
|  | static DEFINE_SPINLOCK(devices_lock); | 
|  |  | 
|  | static bool enable_6lowpan; | 
|  |  | 
|  | /* We are listening incoming connections via this channel | 
|  | */ | 
|  | static struct l2cap_chan *listen_chan; | 
|  | static DEFINE_MUTEX(set_lock); | 
|  |  | 
|  | struct lowpan_peer { | 
|  | struct list_head list; | 
|  | struct rcu_head rcu; | 
|  | struct l2cap_chan *chan; | 
|  |  | 
|  | /* peer addresses in various formats */ | 
|  | unsigned char lladdr[ETH_ALEN]; | 
|  | struct in6_addr peer_addr; | 
|  | }; | 
|  |  | 
|  | struct lowpan_btle_dev { | 
|  | struct list_head list; | 
|  |  | 
|  | struct hci_dev *hdev; | 
|  | struct net_device *netdev; | 
|  | struct list_head peers; | 
|  | atomic_t peer_count; /* number of items in peers list */ | 
|  |  | 
|  | struct work_struct delete_netdev; | 
|  | struct delayed_work notify_peers; | 
|  | }; | 
|  |  | 
|  | static inline struct lowpan_btle_dev * | 
|  | lowpan_btle_dev(const struct net_device *netdev) | 
|  | { | 
|  | return (struct lowpan_btle_dev *)lowpan_dev(netdev)->priv; | 
|  | } | 
|  |  | 
|  | static inline void peer_add(struct lowpan_btle_dev *dev, | 
|  | struct lowpan_peer *peer) | 
|  | { | 
|  | list_add_rcu(&peer->list, &dev->peers); | 
|  | atomic_inc(&dev->peer_count); | 
|  | } | 
|  |  | 
|  | static inline bool peer_del(struct lowpan_btle_dev *dev, | 
|  | struct lowpan_peer *peer) | 
|  | { | 
|  | list_del_rcu(&peer->list); | 
|  | kfree_rcu(peer, rcu); | 
|  |  | 
|  | module_put(THIS_MODULE); | 
|  |  | 
|  | if (atomic_dec_and_test(&dev->peer_count)) { | 
|  | BT_DBG("last peer"); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static inline struct lowpan_peer * | 
|  | __peer_lookup_chan(struct lowpan_btle_dev *dev, struct l2cap_chan *chan) | 
|  | { | 
|  | struct lowpan_peer *peer; | 
|  |  | 
|  | list_for_each_entry_rcu(peer, &dev->peers, list) { | 
|  | if (peer->chan == chan) | 
|  | return peer; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static inline struct lowpan_peer * | 
|  | __peer_lookup_conn(struct lowpan_btle_dev *dev, struct l2cap_conn *conn) | 
|  | { | 
|  | struct lowpan_peer *peer; | 
|  |  | 
|  | list_for_each_entry_rcu(peer, &dev->peers, list) { | 
|  | if (peer->chan->conn == conn) | 
|  | return peer; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static inline struct lowpan_peer *peer_lookup_dst(struct lowpan_btle_dev *dev, | 
|  | struct in6_addr *daddr, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct rt6_info *rt = (struct rt6_info *)skb_dst(skb); | 
|  | int count = atomic_read(&dev->peer_count); | 
|  | const struct in6_addr *nexthop; | 
|  | struct lowpan_peer *peer; | 
|  | struct neighbour *neigh; | 
|  |  | 
|  | BT_DBG("peers %d addr %pI6c rt %p", count, daddr, rt); | 
|  |  | 
|  | if (!rt) { | 
|  | if (ipv6_addr_any(&lowpan_cb(skb)->gw)) { | 
|  | /* There is neither route nor gateway, | 
|  | * probably the destination is a direct peer. | 
|  | */ | 
|  | nexthop = daddr; | 
|  | } else { | 
|  | /* There is a known gateway | 
|  | */ | 
|  | nexthop = &lowpan_cb(skb)->gw; | 
|  | } | 
|  | } else { | 
|  | nexthop = rt6_nexthop(rt, daddr); | 
|  |  | 
|  | /* We need to remember the address because it is needed | 
|  | * by bt_xmit() when sending the packet. In bt_xmit(), the | 
|  | * destination routing info is not set. | 
|  | */ | 
|  | memcpy(&lowpan_cb(skb)->gw, nexthop, sizeof(struct in6_addr)); | 
|  | } | 
|  |  | 
|  | BT_DBG("gw %pI6c", nexthop); | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | list_for_each_entry_rcu(peer, &dev->peers, list) { | 
|  | BT_DBG("dst addr %pMR dst type %u ip %pI6c", | 
|  | &peer->chan->dst, peer->chan->dst_type, | 
|  | &peer->peer_addr); | 
|  |  | 
|  | if (!ipv6_addr_cmp(&peer->peer_addr, nexthop)) { | 
|  | rcu_read_unlock(); | 
|  | return peer; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* use the neighbour cache for matching addresses assigned by SLAAC */ | 
|  | neigh = __ipv6_neigh_lookup(dev->netdev, nexthop); | 
|  | if (neigh) { | 
|  | list_for_each_entry_rcu(peer, &dev->peers, list) { | 
|  | if (!memcmp(neigh->ha, peer->lladdr, ETH_ALEN)) { | 
|  | neigh_release(neigh); | 
|  | rcu_read_unlock(); | 
|  | return peer; | 
|  | } | 
|  | } | 
|  | neigh_release(neigh); | 
|  | } | 
|  |  | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static struct lowpan_peer *lookup_peer(struct l2cap_conn *conn) | 
|  | { | 
|  | struct lowpan_btle_dev *entry; | 
|  | struct lowpan_peer *peer = NULL; | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | list_for_each_entry_rcu(entry, &bt_6lowpan_devices, list) { | 
|  | peer = __peer_lookup_conn(entry, conn); | 
|  | if (peer) | 
|  | break; | 
|  | } | 
|  |  | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return peer; | 
|  | } | 
|  |  | 
|  | static struct lowpan_btle_dev *lookup_dev(struct l2cap_conn *conn) | 
|  | { | 
|  | struct lowpan_btle_dev *entry; | 
|  | struct lowpan_btle_dev *dev = NULL; | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | list_for_each_entry_rcu(entry, &bt_6lowpan_devices, list) { | 
|  | if (conn->hcon->hdev == entry->hdev) { | 
|  | dev = entry; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return dev; | 
|  | } | 
|  |  | 
|  | static int give_skb_to_upper(struct sk_buff *skb, struct net_device *dev) | 
|  | { | 
|  | struct sk_buff *skb_cp; | 
|  |  | 
|  | skb_cp = skb_copy(skb, GFP_ATOMIC); | 
|  | if (!skb_cp) | 
|  | return NET_RX_DROP; | 
|  |  | 
|  | return netif_rx_ni(skb_cp); | 
|  | } | 
|  |  | 
|  | static int iphc_decompress(struct sk_buff *skb, struct net_device *netdev, | 
|  | struct lowpan_peer *peer) | 
|  | { | 
|  | const u8 *saddr; | 
|  |  | 
|  | saddr = peer->lladdr; | 
|  |  | 
|  | return lowpan_header_decompress(skb, netdev, netdev->dev_addr, saddr); | 
|  | } | 
|  |  | 
|  | static int recv_pkt(struct sk_buff *skb, struct net_device *dev, | 
|  | struct lowpan_peer *peer) | 
|  | { | 
|  | struct sk_buff *local_skb; | 
|  | int ret; | 
|  |  | 
|  | if (!netif_running(dev)) | 
|  | goto drop; | 
|  |  | 
|  | if (dev->type != ARPHRD_6LOWPAN || !skb->len) | 
|  | goto drop; | 
|  |  | 
|  | skb_reset_network_header(skb); | 
|  |  | 
|  | skb = skb_share_check(skb, GFP_ATOMIC); | 
|  | if (!skb) | 
|  | goto drop; | 
|  |  | 
|  | /* check that it's our buffer */ | 
|  | if (lowpan_is_ipv6(*skb_network_header(skb))) { | 
|  | /* Pull off the 1-byte of 6lowpan header. */ | 
|  | skb_pull(skb, 1); | 
|  |  | 
|  | /* Copy the packet so that the IPv6 header is | 
|  | * properly aligned. | 
|  | */ | 
|  | local_skb = skb_copy_expand(skb, NET_SKB_PAD - 1, | 
|  | skb_tailroom(skb), GFP_ATOMIC); | 
|  | if (!local_skb) | 
|  | goto drop; | 
|  |  | 
|  | local_skb->protocol = htons(ETH_P_IPV6); | 
|  | local_skb->pkt_type = PACKET_HOST; | 
|  | local_skb->dev = dev; | 
|  |  | 
|  | skb_set_transport_header(local_skb, sizeof(struct ipv6hdr)); | 
|  |  | 
|  | if (give_skb_to_upper(local_skb, dev) != NET_RX_SUCCESS) { | 
|  | kfree_skb(local_skb); | 
|  | goto drop; | 
|  | } | 
|  |  | 
|  | dev->stats.rx_bytes += skb->len; | 
|  | dev->stats.rx_packets++; | 
|  |  | 
|  | consume_skb(local_skb); | 
|  | consume_skb(skb); | 
|  | } else if (lowpan_is_iphc(*skb_network_header(skb))) { | 
|  | local_skb = skb_clone(skb, GFP_ATOMIC); | 
|  | if (!local_skb) | 
|  | goto drop; | 
|  |  | 
|  | local_skb->dev = dev; | 
|  |  | 
|  | ret = iphc_decompress(local_skb, dev, peer); | 
|  | if (ret < 0) { | 
|  | BT_DBG("iphc_decompress failed: %d", ret); | 
|  | kfree_skb(local_skb); | 
|  | goto drop; | 
|  | } | 
|  |  | 
|  | local_skb->protocol = htons(ETH_P_IPV6); | 
|  | local_skb->pkt_type = PACKET_HOST; | 
|  |  | 
|  | if (give_skb_to_upper(local_skb, dev) | 
|  | != NET_RX_SUCCESS) { | 
|  | kfree_skb(local_skb); | 
|  | goto drop; | 
|  | } | 
|  |  | 
|  | dev->stats.rx_bytes += skb->len; | 
|  | dev->stats.rx_packets++; | 
|  |  | 
|  | consume_skb(local_skb); | 
|  | consume_skb(skb); | 
|  | } else { | 
|  | BT_DBG("unknown packet type"); | 
|  | goto drop; | 
|  | } | 
|  |  | 
|  | return NET_RX_SUCCESS; | 
|  |  | 
|  | drop: | 
|  | dev->stats.rx_dropped++; | 
|  | return NET_RX_DROP; | 
|  | } | 
|  |  | 
|  | /* Packet from BT LE device */ | 
|  | static int chan_recv_cb(struct l2cap_chan *chan, struct sk_buff *skb) | 
|  | { | 
|  | struct lowpan_btle_dev *dev; | 
|  | struct lowpan_peer *peer; | 
|  | int err; | 
|  |  | 
|  | peer = lookup_peer(chan->conn); | 
|  | if (!peer) | 
|  | return -ENOENT; | 
|  |  | 
|  | dev = lookup_dev(chan->conn); | 
|  | if (!dev || !dev->netdev) | 
|  | return -ENOENT; | 
|  |  | 
|  | err = recv_pkt(skb, dev->netdev, peer); | 
|  | if (err) { | 
|  | BT_DBG("recv pkt %d", err); | 
|  | err = -EAGAIN; | 
|  | } | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int setup_header(struct sk_buff *skb, struct net_device *netdev, | 
|  | bdaddr_t *peer_addr, u8 *peer_addr_type) | 
|  | { | 
|  | struct in6_addr ipv6_daddr; | 
|  | struct ipv6hdr *hdr; | 
|  | struct lowpan_btle_dev *dev; | 
|  | struct lowpan_peer *peer; | 
|  | u8 *daddr; | 
|  | int err, status = 0; | 
|  |  | 
|  | hdr = ipv6_hdr(skb); | 
|  |  | 
|  | dev = lowpan_btle_dev(netdev); | 
|  |  | 
|  | memcpy(&ipv6_daddr, &hdr->daddr, sizeof(ipv6_daddr)); | 
|  |  | 
|  | if (ipv6_addr_is_multicast(&ipv6_daddr)) { | 
|  | lowpan_cb(skb)->chan = NULL; | 
|  | daddr = NULL; | 
|  | } else { | 
|  | BT_DBG("dest IP %pI6c", &ipv6_daddr); | 
|  |  | 
|  | /* The packet might be sent to 6lowpan interface | 
|  | * because of routing (either via default route | 
|  | * or user set route) so get peer according to | 
|  | * the destination address. | 
|  | */ | 
|  | peer = peer_lookup_dst(dev, &ipv6_daddr, skb); | 
|  | if (!peer) { | 
|  | BT_DBG("no such peer"); | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | daddr = peer->lladdr; | 
|  | *peer_addr = peer->chan->dst; | 
|  | *peer_addr_type = peer->chan->dst_type; | 
|  | lowpan_cb(skb)->chan = peer->chan; | 
|  |  | 
|  | status = 1; | 
|  | } | 
|  |  | 
|  | lowpan_header_compress(skb, netdev, daddr, dev->netdev->dev_addr); | 
|  |  | 
|  | err = dev_hard_header(skb, netdev, ETH_P_IPV6, NULL, NULL, 0); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static int header_create(struct sk_buff *skb, struct net_device *netdev, | 
|  | unsigned short type, const void *_daddr, | 
|  | const void *_saddr, unsigned int len) | 
|  | { | 
|  | if (type != ETH_P_IPV6) | 
|  | return -EINVAL; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Packet to BT LE device */ | 
|  | static int send_pkt(struct l2cap_chan *chan, struct sk_buff *skb, | 
|  | struct net_device *netdev) | 
|  | { | 
|  | struct msghdr msg; | 
|  | struct kvec iv; | 
|  | int err; | 
|  |  | 
|  | /* Remember the skb so that we can send EAGAIN to the caller if | 
|  | * we run out of credits. | 
|  | */ | 
|  | chan->data = skb; | 
|  |  | 
|  | iv.iov_base = skb->data; | 
|  | iv.iov_len = skb->len; | 
|  |  | 
|  | memset(&msg, 0, sizeof(msg)); | 
|  | iov_iter_kvec(&msg.msg_iter, WRITE, &iv, 1, skb->len); | 
|  |  | 
|  | err = l2cap_chan_send(chan, &msg, skb->len); | 
|  | if (err > 0) { | 
|  | netdev->stats.tx_bytes += err; | 
|  | netdev->stats.tx_packets++; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (err < 0) | 
|  | netdev->stats.tx_errors++; | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int send_mcast_pkt(struct sk_buff *skb, struct net_device *netdev) | 
|  | { | 
|  | struct sk_buff *local_skb; | 
|  | struct lowpan_btle_dev *entry; | 
|  | int err = 0; | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | list_for_each_entry_rcu(entry, &bt_6lowpan_devices, list) { | 
|  | struct lowpan_peer *pentry; | 
|  | struct lowpan_btle_dev *dev; | 
|  |  | 
|  | if (entry->netdev != netdev) | 
|  | continue; | 
|  |  | 
|  | dev = lowpan_btle_dev(entry->netdev); | 
|  |  | 
|  | list_for_each_entry_rcu(pentry, &dev->peers, list) { | 
|  | int ret; | 
|  |  | 
|  | local_skb = skb_clone(skb, GFP_ATOMIC); | 
|  |  | 
|  | BT_DBG("xmit %s to %pMR type %u IP %pI6c chan %p", | 
|  | netdev->name, | 
|  | &pentry->chan->dst, pentry->chan->dst_type, | 
|  | &pentry->peer_addr, pentry->chan); | 
|  | ret = send_pkt(pentry->chan, local_skb, netdev); | 
|  | if (ret < 0) | 
|  | err = ret; | 
|  |  | 
|  | kfree_skb(local_skb); | 
|  | } | 
|  | } | 
|  |  | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static netdev_tx_t bt_xmit(struct sk_buff *skb, struct net_device *netdev) | 
|  | { | 
|  | int err = 0; | 
|  | bdaddr_t addr; | 
|  | u8 addr_type; | 
|  |  | 
|  | /* We must take a copy of the skb before we modify/replace the ipv6 | 
|  | * header as the header could be used elsewhere | 
|  | */ | 
|  | skb = skb_unshare(skb, GFP_ATOMIC); | 
|  | if (!skb) | 
|  | return NET_XMIT_DROP; | 
|  |  | 
|  | /* Return values from setup_header() | 
|  | *  <0 - error, packet is dropped | 
|  | *   0 - this is a multicast packet | 
|  | *   1 - this is unicast packet | 
|  | */ | 
|  | err = setup_header(skb, netdev, &addr, &addr_type); | 
|  | if (err < 0) { | 
|  | kfree_skb(skb); | 
|  | return NET_XMIT_DROP; | 
|  | } | 
|  |  | 
|  | if (err) { | 
|  | if (lowpan_cb(skb)->chan) { | 
|  | BT_DBG("xmit %s to %pMR type %u IP %pI6c chan %p", | 
|  | netdev->name, &addr, addr_type, | 
|  | &lowpan_cb(skb)->addr, lowpan_cb(skb)->chan); | 
|  | err = send_pkt(lowpan_cb(skb)->chan, skb, netdev); | 
|  | } else { | 
|  | err = -ENOENT; | 
|  | } | 
|  | } else { | 
|  | /* We need to send the packet to every device behind this | 
|  | * interface. | 
|  | */ | 
|  | err = send_mcast_pkt(skb, netdev); | 
|  | } | 
|  |  | 
|  | dev_kfree_skb(skb); | 
|  |  | 
|  | if (err) | 
|  | BT_DBG("ERROR: xmit failed (%d)", err); | 
|  |  | 
|  | return err < 0 ? NET_XMIT_DROP : err; | 
|  | } | 
|  |  | 
|  | static int bt_dev_init(struct net_device *dev) | 
|  | { | 
|  | netdev_lockdep_set_classes(dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct net_device_ops netdev_ops = { | 
|  | .ndo_init		= bt_dev_init, | 
|  | .ndo_start_xmit		= bt_xmit, | 
|  | }; | 
|  |  | 
|  | static const struct header_ops header_ops = { | 
|  | .create	= header_create, | 
|  | }; | 
|  |  | 
|  | static void netdev_setup(struct net_device *dev) | 
|  | { | 
|  | dev->hard_header_len	= 0; | 
|  | dev->needed_tailroom	= 0; | 
|  | dev->flags		= IFF_RUNNING | IFF_MULTICAST; | 
|  | dev->watchdog_timeo	= 0; | 
|  | dev->tx_queue_len	= DEFAULT_TX_QUEUE_LEN; | 
|  |  | 
|  | dev->netdev_ops		= &netdev_ops; | 
|  | dev->header_ops		= &header_ops; | 
|  | dev->needs_free_netdev	= true; | 
|  | } | 
|  |  | 
|  | static struct device_type bt_type = { | 
|  | .name	= "bluetooth", | 
|  | }; | 
|  |  | 
|  | static void ifup(struct net_device *netdev) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | rtnl_lock(); | 
|  | err = dev_open(netdev, NULL); | 
|  | if (err < 0) | 
|  | BT_INFO("iface %s cannot be opened (%d)", netdev->name, err); | 
|  | rtnl_unlock(); | 
|  | } | 
|  |  | 
|  | static void ifdown(struct net_device *netdev) | 
|  | { | 
|  | rtnl_lock(); | 
|  | dev_close(netdev); | 
|  | rtnl_unlock(); | 
|  | } | 
|  |  | 
|  | static void do_notify_peers(struct work_struct *work) | 
|  | { | 
|  | struct lowpan_btle_dev *dev = container_of(work, struct lowpan_btle_dev, | 
|  | notify_peers.work); | 
|  |  | 
|  | netdev_notify_peers(dev->netdev); /* send neighbour adv at startup */ | 
|  | } | 
|  |  | 
|  | static bool is_bt_6lowpan(struct hci_conn *hcon) | 
|  | { | 
|  | if (hcon->type != LE_LINK) | 
|  | return false; | 
|  |  | 
|  | if (!enable_6lowpan) | 
|  | return false; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static struct l2cap_chan *chan_create(void) | 
|  | { | 
|  | struct l2cap_chan *chan; | 
|  |  | 
|  | chan = l2cap_chan_create(); | 
|  | if (!chan) | 
|  | return NULL; | 
|  |  | 
|  | l2cap_chan_set_defaults(chan); | 
|  |  | 
|  | chan->chan_type = L2CAP_CHAN_CONN_ORIENTED; | 
|  | chan->mode = L2CAP_MODE_LE_FLOWCTL; | 
|  | chan->imtu = 1280; | 
|  |  | 
|  | return chan; | 
|  | } | 
|  |  | 
|  | static struct l2cap_chan *add_peer_chan(struct l2cap_chan *chan, | 
|  | struct lowpan_btle_dev *dev, | 
|  | bool new_netdev) | 
|  | { | 
|  | struct lowpan_peer *peer; | 
|  |  | 
|  | peer = kzalloc(sizeof(*peer), GFP_ATOMIC); | 
|  | if (!peer) | 
|  | return NULL; | 
|  |  | 
|  | peer->chan = chan; | 
|  | memset(&peer->peer_addr, 0, sizeof(struct in6_addr)); | 
|  |  | 
|  | baswap((void *)peer->lladdr, &chan->dst); | 
|  |  | 
|  | lowpan_iphc_uncompress_eui48_lladdr(&peer->peer_addr, peer->lladdr); | 
|  |  | 
|  | spin_lock(&devices_lock); | 
|  | INIT_LIST_HEAD(&peer->list); | 
|  | peer_add(dev, peer); | 
|  | spin_unlock(&devices_lock); | 
|  |  | 
|  | /* Notifying peers about us needs to be done without locks held */ | 
|  | if (new_netdev) | 
|  | INIT_DELAYED_WORK(&dev->notify_peers, do_notify_peers); | 
|  | schedule_delayed_work(&dev->notify_peers, msecs_to_jiffies(100)); | 
|  |  | 
|  | return peer->chan; | 
|  | } | 
|  |  | 
|  | static int setup_netdev(struct l2cap_chan *chan, struct lowpan_btle_dev **dev) | 
|  | { | 
|  | struct net_device *netdev; | 
|  | int err; | 
|  |  | 
|  | netdev = alloc_netdev(LOWPAN_PRIV_SIZE(sizeof(struct lowpan_btle_dev)), | 
|  | IFACE_NAME_TEMPLATE, NET_NAME_UNKNOWN, | 
|  | netdev_setup); | 
|  | if (!netdev) | 
|  | return -ENOMEM; | 
|  |  | 
|  | netdev->addr_assign_type = NET_ADDR_PERM; | 
|  | baswap((void *)netdev->dev_addr, &chan->src); | 
|  |  | 
|  | netdev->netdev_ops = &netdev_ops; | 
|  | SET_NETDEV_DEV(netdev, &chan->conn->hcon->hdev->dev); | 
|  | SET_NETDEV_DEVTYPE(netdev, &bt_type); | 
|  |  | 
|  | *dev = lowpan_btle_dev(netdev); | 
|  | (*dev)->netdev = netdev; | 
|  | (*dev)->hdev = chan->conn->hcon->hdev; | 
|  | INIT_LIST_HEAD(&(*dev)->peers); | 
|  |  | 
|  | spin_lock(&devices_lock); | 
|  | INIT_LIST_HEAD(&(*dev)->list); | 
|  | list_add_rcu(&(*dev)->list, &bt_6lowpan_devices); | 
|  | spin_unlock(&devices_lock); | 
|  |  | 
|  | err = lowpan_register_netdev(netdev, LOWPAN_LLTYPE_BTLE); | 
|  | if (err < 0) { | 
|  | BT_INFO("register_netdev failed %d", err); | 
|  | spin_lock(&devices_lock); | 
|  | list_del_rcu(&(*dev)->list); | 
|  | spin_unlock(&devices_lock); | 
|  | free_netdev(netdev); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | BT_DBG("ifindex %d peer bdaddr %pMR type %d my addr %pMR type %d", | 
|  | netdev->ifindex, &chan->dst, chan->dst_type, | 
|  | &chan->src, chan->src_type); | 
|  | set_bit(__LINK_STATE_PRESENT, &netdev->state); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out: | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static inline void chan_ready_cb(struct l2cap_chan *chan) | 
|  | { | 
|  | struct lowpan_btle_dev *dev; | 
|  | bool new_netdev = false; | 
|  |  | 
|  | dev = lookup_dev(chan->conn); | 
|  |  | 
|  | BT_DBG("chan %p conn %p dev %p", chan, chan->conn, dev); | 
|  |  | 
|  | if (!dev) { | 
|  | if (setup_netdev(chan, &dev) < 0) { | 
|  | l2cap_chan_del(chan, -ENOENT); | 
|  | return; | 
|  | } | 
|  | new_netdev = true; | 
|  | } | 
|  |  | 
|  | if (!try_module_get(THIS_MODULE)) | 
|  | return; | 
|  |  | 
|  | add_peer_chan(chan, dev, new_netdev); | 
|  | ifup(dev->netdev); | 
|  | } | 
|  |  | 
|  | static inline struct l2cap_chan *chan_new_conn_cb(struct l2cap_chan *pchan) | 
|  | { | 
|  | struct l2cap_chan *chan; | 
|  |  | 
|  | chan = chan_create(); | 
|  | if (!chan) | 
|  | return NULL; | 
|  |  | 
|  | chan->ops = pchan->ops; | 
|  |  | 
|  | BT_DBG("chan %p pchan %p", chan, pchan); | 
|  |  | 
|  | return chan; | 
|  | } | 
|  |  | 
|  | static void delete_netdev(struct work_struct *work) | 
|  | { | 
|  | struct lowpan_btle_dev *entry = container_of(work, | 
|  | struct lowpan_btle_dev, | 
|  | delete_netdev); | 
|  |  | 
|  | lowpan_unregister_netdev(entry->netdev); | 
|  |  | 
|  | /* The entry pointer is deleted by the netdev destructor. */ | 
|  | } | 
|  |  | 
|  | static void chan_close_cb(struct l2cap_chan *chan) | 
|  | { | 
|  | struct lowpan_btle_dev *entry; | 
|  | struct lowpan_btle_dev *dev = NULL; | 
|  | struct lowpan_peer *peer; | 
|  | int err = -ENOENT; | 
|  | bool last = false, remove = true; | 
|  |  | 
|  | BT_DBG("chan %p conn %p", chan, chan->conn); | 
|  |  | 
|  | if (chan->conn && chan->conn->hcon) { | 
|  | if (!is_bt_6lowpan(chan->conn->hcon)) | 
|  | return; | 
|  |  | 
|  | /* If conn is set, then the netdev is also there and we should | 
|  | * not remove it. | 
|  | */ | 
|  | remove = false; | 
|  | } | 
|  |  | 
|  | spin_lock(&devices_lock); | 
|  |  | 
|  | list_for_each_entry_rcu(entry, &bt_6lowpan_devices, list) { | 
|  | dev = lowpan_btle_dev(entry->netdev); | 
|  | peer = __peer_lookup_chan(dev, chan); | 
|  | if (peer) { | 
|  | last = peer_del(dev, peer); | 
|  | err = 0; | 
|  |  | 
|  | BT_DBG("dev %p removing %speer %p", dev, | 
|  | last ? "last " : "1 ", peer); | 
|  | BT_DBG("chan %p orig refcnt %u", chan, | 
|  | kref_read(&chan->kref)); | 
|  |  | 
|  | l2cap_chan_put(chan); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!err && last && dev && !atomic_read(&dev->peer_count)) { | 
|  | spin_unlock(&devices_lock); | 
|  |  | 
|  | cancel_delayed_work_sync(&dev->notify_peers); | 
|  |  | 
|  | ifdown(dev->netdev); | 
|  |  | 
|  | if (remove) { | 
|  | INIT_WORK(&entry->delete_netdev, delete_netdev); | 
|  | schedule_work(&entry->delete_netdev); | 
|  | } | 
|  | } else { | 
|  | spin_unlock(&devices_lock); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void chan_state_change_cb(struct l2cap_chan *chan, int state, int err) | 
|  | { | 
|  | BT_DBG("chan %p conn %p state %s err %d", chan, chan->conn, | 
|  | state_to_string(state), err); | 
|  | } | 
|  |  | 
|  | static struct sk_buff *chan_alloc_skb_cb(struct l2cap_chan *chan, | 
|  | unsigned long hdr_len, | 
|  | unsigned long len, int nb) | 
|  | { | 
|  | /* Note that we must allocate using GFP_ATOMIC here as | 
|  | * this function is called originally from netdev hard xmit | 
|  | * function in atomic context. | 
|  | */ | 
|  | return bt_skb_alloc(hdr_len + len, GFP_ATOMIC); | 
|  | } | 
|  |  | 
|  | static void chan_suspend_cb(struct l2cap_chan *chan) | 
|  | { | 
|  | struct lowpan_btle_dev *dev; | 
|  |  | 
|  | BT_DBG("chan %p suspend", chan); | 
|  |  | 
|  | dev = lookup_dev(chan->conn); | 
|  | if (!dev || !dev->netdev) | 
|  | return; | 
|  |  | 
|  | netif_stop_queue(dev->netdev); | 
|  | } | 
|  |  | 
|  | static void chan_resume_cb(struct l2cap_chan *chan) | 
|  | { | 
|  | struct lowpan_btle_dev *dev; | 
|  |  | 
|  | BT_DBG("chan %p resume", chan); | 
|  |  | 
|  | dev = lookup_dev(chan->conn); | 
|  | if (!dev || !dev->netdev) | 
|  | return; | 
|  |  | 
|  | netif_wake_queue(dev->netdev); | 
|  | } | 
|  |  | 
|  | static long chan_get_sndtimeo_cb(struct l2cap_chan *chan) | 
|  | { | 
|  | return L2CAP_CONN_TIMEOUT; | 
|  | } | 
|  |  | 
|  | static const struct l2cap_ops bt_6lowpan_chan_ops = { | 
|  | .name			= "L2CAP 6LoWPAN channel", | 
|  | .new_connection		= chan_new_conn_cb, | 
|  | .recv			= chan_recv_cb, | 
|  | .close			= chan_close_cb, | 
|  | .state_change		= chan_state_change_cb, | 
|  | .ready			= chan_ready_cb, | 
|  | .resume			= chan_resume_cb, | 
|  | .suspend		= chan_suspend_cb, | 
|  | .get_sndtimeo		= chan_get_sndtimeo_cb, | 
|  | .alloc_skb		= chan_alloc_skb_cb, | 
|  |  | 
|  | .teardown		= l2cap_chan_no_teardown, | 
|  | .defer			= l2cap_chan_no_defer, | 
|  | .set_shutdown		= l2cap_chan_no_set_shutdown, | 
|  | }; | 
|  |  | 
|  | static int bt_6lowpan_connect(bdaddr_t *addr, u8 dst_type) | 
|  | { | 
|  | struct l2cap_chan *chan; | 
|  | int err; | 
|  |  | 
|  | chan = chan_create(); | 
|  | if (!chan) | 
|  | return -EINVAL; | 
|  |  | 
|  | chan->ops = &bt_6lowpan_chan_ops; | 
|  |  | 
|  | err = l2cap_chan_connect(chan, cpu_to_le16(L2CAP_PSM_IPSP), 0, | 
|  | addr, dst_type); | 
|  |  | 
|  | BT_DBG("chan %p err %d", chan, err); | 
|  | if (err < 0) | 
|  | l2cap_chan_put(chan); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int bt_6lowpan_disconnect(struct l2cap_conn *conn, u8 dst_type) | 
|  | { | 
|  | struct lowpan_peer *peer; | 
|  |  | 
|  | BT_DBG("conn %p dst type %u", conn, dst_type); | 
|  |  | 
|  | peer = lookup_peer(conn); | 
|  | if (!peer) | 
|  | return -ENOENT; | 
|  |  | 
|  | BT_DBG("peer %p chan %p", peer, peer->chan); | 
|  |  | 
|  | l2cap_chan_close(peer->chan, ENOENT); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct l2cap_chan *bt_6lowpan_listen(void) | 
|  | { | 
|  | bdaddr_t *addr = BDADDR_ANY; | 
|  | struct l2cap_chan *chan; | 
|  | int err; | 
|  |  | 
|  | if (!enable_6lowpan) | 
|  | return NULL; | 
|  |  | 
|  | chan = chan_create(); | 
|  | if (!chan) | 
|  | return NULL; | 
|  |  | 
|  | chan->ops = &bt_6lowpan_chan_ops; | 
|  | chan->state = BT_LISTEN; | 
|  | chan->src_type = BDADDR_LE_PUBLIC; | 
|  |  | 
|  | atomic_set(&chan->nesting, L2CAP_NESTING_PARENT); | 
|  |  | 
|  | BT_DBG("chan %p src type %u", chan, chan->src_type); | 
|  |  | 
|  | err = l2cap_add_psm(chan, addr, cpu_to_le16(L2CAP_PSM_IPSP)); | 
|  | if (err) { | 
|  | l2cap_chan_put(chan); | 
|  | BT_ERR("psm cannot be added err %d", err); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | return chan; | 
|  | } | 
|  |  | 
|  | static int get_l2cap_conn(char *buf, bdaddr_t *addr, u8 *addr_type, | 
|  | struct l2cap_conn **conn) | 
|  | { | 
|  | struct hci_conn *hcon; | 
|  | struct hci_dev *hdev; | 
|  | int n; | 
|  |  | 
|  | n = sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx %hhu", | 
|  | &addr->b[5], &addr->b[4], &addr->b[3], | 
|  | &addr->b[2], &addr->b[1], &addr->b[0], | 
|  | addr_type); | 
|  |  | 
|  | if (n < 7) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* The LE_PUBLIC address type is ignored because of BDADDR_ANY */ | 
|  | hdev = hci_get_route(addr, BDADDR_ANY, BDADDR_LE_PUBLIC); | 
|  | if (!hdev) | 
|  | return -ENOENT; | 
|  |  | 
|  | hci_dev_lock(hdev); | 
|  | hcon = hci_conn_hash_lookup_le(hdev, addr, *addr_type); | 
|  | hci_dev_unlock(hdev); | 
|  | hci_dev_put(hdev); | 
|  |  | 
|  | if (!hcon) | 
|  | return -ENOENT; | 
|  |  | 
|  | *conn = (struct l2cap_conn *)hcon->l2cap_data; | 
|  |  | 
|  | BT_DBG("conn %p dst %pMR type %u", *conn, &hcon->dst, hcon->dst_type); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void disconnect_all_peers(void) | 
|  | { | 
|  | struct lowpan_btle_dev *entry; | 
|  | struct lowpan_peer *peer, *tmp_peer, *new_peer; | 
|  | struct list_head peers; | 
|  |  | 
|  | INIT_LIST_HEAD(&peers); | 
|  |  | 
|  | /* We make a separate list of peers as the close_cb() will | 
|  | * modify the device peers list so it is better not to mess | 
|  | * with the same list at the same time. | 
|  | */ | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | list_for_each_entry_rcu(entry, &bt_6lowpan_devices, list) { | 
|  | list_for_each_entry_rcu(peer, &entry->peers, list) { | 
|  | new_peer = kmalloc(sizeof(*new_peer), GFP_ATOMIC); | 
|  | if (!new_peer) | 
|  | break; | 
|  |  | 
|  | new_peer->chan = peer->chan; | 
|  | INIT_LIST_HEAD(&new_peer->list); | 
|  |  | 
|  | list_add(&new_peer->list, &peers); | 
|  | } | 
|  | } | 
|  |  | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | spin_lock(&devices_lock); | 
|  | list_for_each_entry_safe(peer, tmp_peer, &peers, list) { | 
|  | l2cap_chan_close(peer->chan, ENOENT); | 
|  |  | 
|  | list_del_rcu(&peer->list); | 
|  | kfree_rcu(peer, rcu); | 
|  | } | 
|  | spin_unlock(&devices_lock); | 
|  | } | 
|  |  | 
|  | struct set_enable { | 
|  | struct work_struct work; | 
|  | bool flag; | 
|  | }; | 
|  |  | 
|  | static void do_enable_set(struct work_struct *work) | 
|  | { | 
|  | struct set_enable *set_enable = container_of(work, | 
|  | struct set_enable, work); | 
|  |  | 
|  | if (!set_enable->flag || enable_6lowpan != set_enable->flag) | 
|  | /* Disconnect existing connections if 6lowpan is | 
|  | * disabled | 
|  | */ | 
|  | disconnect_all_peers(); | 
|  |  | 
|  | enable_6lowpan = set_enable->flag; | 
|  |  | 
|  | mutex_lock(&set_lock); | 
|  | if (listen_chan) { | 
|  | l2cap_chan_close(listen_chan, 0); | 
|  | l2cap_chan_put(listen_chan); | 
|  | } | 
|  |  | 
|  | listen_chan = bt_6lowpan_listen(); | 
|  | mutex_unlock(&set_lock); | 
|  |  | 
|  | kfree(set_enable); | 
|  | } | 
|  |  | 
|  | static int lowpan_enable_set(void *data, u64 val) | 
|  | { | 
|  | struct set_enable *set_enable; | 
|  |  | 
|  | set_enable = kzalloc(sizeof(*set_enable), GFP_KERNEL); | 
|  | if (!set_enable) | 
|  | return -ENOMEM; | 
|  |  | 
|  | set_enable->flag = !!val; | 
|  | INIT_WORK(&set_enable->work, do_enable_set); | 
|  |  | 
|  | schedule_work(&set_enable->work); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int lowpan_enable_get(void *data, u64 *val) | 
|  | { | 
|  | *val = enable_6lowpan; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | DEFINE_DEBUGFS_ATTRIBUTE(lowpan_enable_fops, lowpan_enable_get, | 
|  | lowpan_enable_set, "%llu\n"); | 
|  |  | 
|  | static ssize_t lowpan_control_write(struct file *fp, | 
|  | const char __user *user_buffer, | 
|  | size_t count, | 
|  | loff_t *position) | 
|  | { | 
|  | char buf[32]; | 
|  | size_t buf_size = min(count, sizeof(buf) - 1); | 
|  | int ret; | 
|  | bdaddr_t addr; | 
|  | u8 addr_type; | 
|  | struct l2cap_conn *conn = NULL; | 
|  |  | 
|  | if (copy_from_user(buf, user_buffer, buf_size)) | 
|  | return -EFAULT; | 
|  |  | 
|  | buf[buf_size] = '\0'; | 
|  |  | 
|  | if (memcmp(buf, "connect ", 8) == 0) { | 
|  | ret = get_l2cap_conn(&buf[8], &addr, &addr_type, &conn); | 
|  | if (ret == -EINVAL) | 
|  | return ret; | 
|  |  | 
|  | mutex_lock(&set_lock); | 
|  | if (listen_chan) { | 
|  | l2cap_chan_close(listen_chan, 0); | 
|  | l2cap_chan_put(listen_chan); | 
|  | listen_chan = NULL; | 
|  | } | 
|  | mutex_unlock(&set_lock); | 
|  |  | 
|  | if (conn) { | 
|  | struct lowpan_peer *peer; | 
|  |  | 
|  | if (!is_bt_6lowpan(conn->hcon)) | 
|  | return -EINVAL; | 
|  |  | 
|  | peer = lookup_peer(conn); | 
|  | if (peer) { | 
|  | BT_DBG("6LoWPAN connection already exists"); | 
|  | return -EALREADY; | 
|  | } | 
|  |  | 
|  | BT_DBG("conn %p dst %pMR type %d user %u", conn, | 
|  | &conn->hcon->dst, conn->hcon->dst_type, | 
|  | addr_type); | 
|  | } | 
|  |  | 
|  | ret = bt_6lowpan_connect(&addr, addr_type); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | if (memcmp(buf, "disconnect ", 11) == 0) { | 
|  | ret = get_l2cap_conn(&buf[11], &addr, &addr_type, &conn); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = bt_6lowpan_disconnect(conn, addr_type); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static int lowpan_control_show(struct seq_file *f, void *ptr) | 
|  | { | 
|  | struct lowpan_btle_dev *entry; | 
|  | struct lowpan_peer *peer; | 
|  |  | 
|  | spin_lock(&devices_lock); | 
|  |  | 
|  | list_for_each_entry(entry, &bt_6lowpan_devices, list) { | 
|  | list_for_each_entry(peer, &entry->peers, list) | 
|  | seq_printf(f, "%pMR (type %u)\n", | 
|  | &peer->chan->dst, peer->chan->dst_type); | 
|  | } | 
|  |  | 
|  | spin_unlock(&devices_lock); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int lowpan_control_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | return single_open(file, lowpan_control_show, inode->i_private); | 
|  | } | 
|  |  | 
|  | static const struct file_operations lowpan_control_fops = { | 
|  | .open		= lowpan_control_open, | 
|  | .read		= seq_read, | 
|  | .write		= lowpan_control_write, | 
|  | .llseek		= seq_lseek, | 
|  | .release	= single_release, | 
|  | }; | 
|  |  | 
|  | static void disconnect_devices(void) | 
|  | { | 
|  | struct lowpan_btle_dev *entry, *tmp, *new_dev; | 
|  | struct list_head devices; | 
|  |  | 
|  | INIT_LIST_HEAD(&devices); | 
|  |  | 
|  | /* We make a separate list of devices because the unregister_netdev() | 
|  | * will call device_event() which will also want to modify the same | 
|  | * devices list. | 
|  | */ | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | list_for_each_entry_rcu(entry, &bt_6lowpan_devices, list) { | 
|  | new_dev = kmalloc(sizeof(*new_dev), GFP_ATOMIC); | 
|  | if (!new_dev) | 
|  | break; | 
|  |  | 
|  | new_dev->netdev = entry->netdev; | 
|  | INIT_LIST_HEAD(&new_dev->list); | 
|  |  | 
|  | list_add_rcu(&new_dev->list, &devices); | 
|  | } | 
|  |  | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | list_for_each_entry_safe(entry, tmp, &devices, list) { | 
|  | ifdown(entry->netdev); | 
|  | BT_DBG("Unregistering netdev %s %p", | 
|  | entry->netdev->name, entry->netdev); | 
|  | lowpan_unregister_netdev(entry->netdev); | 
|  | kfree(entry); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int device_event(struct notifier_block *unused, | 
|  | unsigned long event, void *ptr) | 
|  | { | 
|  | struct net_device *netdev = netdev_notifier_info_to_dev(ptr); | 
|  | struct lowpan_btle_dev *entry; | 
|  |  | 
|  | if (netdev->type != ARPHRD_6LOWPAN) | 
|  | return NOTIFY_DONE; | 
|  |  | 
|  | switch (event) { | 
|  | case NETDEV_UNREGISTER: | 
|  | spin_lock(&devices_lock); | 
|  | list_for_each_entry(entry, &bt_6lowpan_devices, list) { | 
|  | if (entry->netdev == netdev) { | 
|  | BT_DBG("Unregistered netdev %s %p", | 
|  | netdev->name, netdev); | 
|  | list_del(&entry->list); | 
|  | break; | 
|  | } | 
|  | } | 
|  | spin_unlock(&devices_lock); | 
|  | break; | 
|  | } | 
|  |  | 
|  | return NOTIFY_DONE; | 
|  | } | 
|  |  | 
|  | static struct notifier_block bt_6lowpan_dev_notifier = { | 
|  | .notifier_call = device_event, | 
|  | }; | 
|  |  | 
|  | static int __init bt_6lowpan_init(void) | 
|  | { | 
|  | lowpan_enable_debugfs = debugfs_create_file_unsafe("6lowpan_enable", | 
|  | 0644, bt_debugfs, | 
|  | NULL, | 
|  | &lowpan_enable_fops); | 
|  | lowpan_control_debugfs = debugfs_create_file("6lowpan_control", 0644, | 
|  | bt_debugfs, NULL, | 
|  | &lowpan_control_fops); | 
|  |  | 
|  | return register_netdevice_notifier(&bt_6lowpan_dev_notifier); | 
|  | } | 
|  |  | 
|  | static void __exit bt_6lowpan_exit(void) | 
|  | { | 
|  | debugfs_remove(lowpan_enable_debugfs); | 
|  | debugfs_remove(lowpan_control_debugfs); | 
|  |  | 
|  | if (listen_chan) { | 
|  | l2cap_chan_close(listen_chan, 0); | 
|  | l2cap_chan_put(listen_chan); | 
|  | } | 
|  |  | 
|  | disconnect_devices(); | 
|  |  | 
|  | unregister_netdevice_notifier(&bt_6lowpan_dev_notifier); | 
|  | } | 
|  |  | 
|  | module_init(bt_6lowpan_init); | 
|  | module_exit(bt_6lowpan_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Jukka Rissanen <jukka.rissanen@linux.intel.com>"); | 
|  | MODULE_DESCRIPTION("Bluetooth 6LoWPAN"); | 
|  | MODULE_VERSION(VERSION); | 
|  | MODULE_LICENSE("GPL"); |