| // SPDX-License-Identifier: GPL-2.0 | 
 | /* | 
 |  * sgi_w1.c - w1 master driver for one wire support in SGI ASICs | 
 |  */ | 
 |  | 
 | #include <linux/clk.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/io.h> | 
 | #include <linux/jiffies.h> | 
 | #include <linux/module.h> | 
 | #include <linux/mod_devicetable.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/platform_data/sgi-w1.h> | 
 |  | 
 | #include <linux/w1.h> | 
 |  | 
 | #define MCR_RD_DATA	BIT(0) | 
 | #define MCR_DONE	BIT(1) | 
 |  | 
 | #define MCR_PACK(pulse, sample) (((pulse) << 10) | ((sample) << 2)) | 
 |  | 
 | struct sgi_w1_device { | 
 | 	u32 __iomem *mcr; | 
 | 	struct w1_bus_master bus_master; | 
 | 	char dev_id[64]; | 
 | }; | 
 |  | 
 | static u8 sgi_w1_wait(u32 __iomem *mcr) | 
 | { | 
 | 	u32 mcr_val; | 
 |  | 
 | 	do { | 
 | 		mcr_val = readl(mcr); | 
 | 	} while (!(mcr_val & MCR_DONE)); | 
 |  | 
 | 	return (mcr_val & MCR_RD_DATA) ? 1 : 0; | 
 | } | 
 |  | 
 | /* | 
 |  * this is the low level routine to | 
 |  * reset the device on the One Wire interface | 
 |  * on the hardware | 
 |  */ | 
 | static u8 sgi_w1_reset_bus(void *data) | 
 | { | 
 | 	struct sgi_w1_device *dev = data; | 
 | 	u8 ret; | 
 |  | 
 | 	writel(MCR_PACK(520, 65), dev->mcr); | 
 | 	ret = sgi_w1_wait(dev->mcr); | 
 | 	udelay(500); /* recovery time */ | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * this is the low level routine to read/write a bit on the One Wire | 
 |  * interface on the hardware. It does write 0 if parameter bit is set | 
 |  * to 0, otherwise a write 1/read. | 
 |  */ | 
 | static u8 sgi_w1_touch_bit(void *data, u8 bit) | 
 | { | 
 | 	struct sgi_w1_device *dev = data; | 
 | 	u8 ret; | 
 |  | 
 | 	if (bit) | 
 | 		writel(MCR_PACK(6, 13), dev->mcr); | 
 | 	else | 
 | 		writel(MCR_PACK(80, 30), dev->mcr); | 
 |  | 
 | 	ret = sgi_w1_wait(dev->mcr); | 
 | 	if (bit) | 
 | 		udelay(100); /* recovery */ | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int sgi_w1_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct sgi_w1_device *sdev; | 
 | 	struct sgi_w1_platform_data *pdata; | 
 |  | 
 | 	sdev = devm_kzalloc(&pdev->dev, sizeof(struct sgi_w1_device), | 
 | 			    GFP_KERNEL); | 
 | 	if (!sdev) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	sdev->mcr = devm_platform_ioremap_resource(pdev, 0); | 
 | 	if (IS_ERR(sdev->mcr)) | 
 | 		return PTR_ERR(sdev->mcr); | 
 |  | 
 | 	sdev->bus_master.data = sdev; | 
 | 	sdev->bus_master.reset_bus = sgi_w1_reset_bus; | 
 | 	sdev->bus_master.touch_bit = sgi_w1_touch_bit; | 
 |  | 
 | 	pdata = dev_get_platdata(&pdev->dev); | 
 | 	if (pdata) { | 
 | 		strlcpy(sdev->dev_id, pdata->dev_id, sizeof(sdev->dev_id)); | 
 | 		sdev->bus_master.dev_id = sdev->dev_id; | 
 | 	} | 
 |  | 
 | 	platform_set_drvdata(pdev, sdev); | 
 |  | 
 | 	return w1_add_master_device(&sdev->bus_master); | 
 | } | 
 |  | 
 | /* | 
 |  * disassociate the w1 device from the driver | 
 |  */ | 
 | static int sgi_w1_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct sgi_w1_device *sdev = platform_get_drvdata(pdev); | 
 |  | 
 | 	w1_remove_master_device(&sdev->bus_master); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct platform_driver sgi_w1_driver = { | 
 | 	.driver = { | 
 | 		.name = "sgi_w1", | 
 | 	}, | 
 | 	.probe = sgi_w1_probe, | 
 | 	.remove = sgi_w1_remove, | 
 | }; | 
 | module_platform_driver(sgi_w1_driver); | 
 |  | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_AUTHOR("Thomas Bogendoerfer"); | 
 | MODULE_DESCRIPTION("Driver for One-Wire IP in SGI ASICs"); |