|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * Junction temperature thermal driver for Maxim Max77620. | 
|  | * | 
|  | * Copyright (c) 2016, NVIDIA CORPORATION.  All rights reserved. | 
|  | * | 
|  | * Author: Laxman Dewangan <ldewangan@nvidia.com> | 
|  | *	   Mallikarjun Kasoju <mkasoju@nvidia.com> | 
|  | */ | 
|  |  | 
|  | #include <linux/irq.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/mfd/max77620.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/regmap.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/thermal.h> | 
|  |  | 
|  | #define MAX77620_NORMAL_OPERATING_TEMP	100000 | 
|  | #define MAX77620_TJALARM1_TEMP		120000 | 
|  | #define MAX77620_TJALARM2_TEMP		140000 | 
|  |  | 
|  | struct max77620_therm_info { | 
|  | struct device			*dev; | 
|  | struct regmap			*rmap; | 
|  | struct thermal_zone_device	*tz_device; | 
|  | int				irq_tjalarm1; | 
|  | int				irq_tjalarm2; | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * max77620_thermal_read_temp: Read PMIC die temperatue. | 
|  | * @data:	Device specific data. | 
|  | * @temp:	Temperature in millidegrees Celsius | 
|  | * | 
|  | * The actual temperature of PMIC die is not available from PMIC. | 
|  | * PMIC only tells the status if it has crossed or not the threshold level | 
|  | * of 120degC or 140degC. | 
|  | * If threshold has not been crossed then assume die temperature as 100degC | 
|  | * else 120degC or 140deG based on the PMIC die temp threshold status. | 
|  | * | 
|  | * Return 0 on success otherwise error number to show reason of failure. | 
|  | */ | 
|  |  | 
|  | static int max77620_thermal_read_temp(void *data, int *temp) | 
|  | { | 
|  | struct max77620_therm_info *mtherm = data; | 
|  | unsigned int val; | 
|  | int ret; | 
|  |  | 
|  | ret = regmap_read(mtherm->rmap, MAX77620_REG_STATLBT, &val); | 
|  | if (ret < 0) { | 
|  | dev_err(mtherm->dev, "Failed to read STATLBT: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (val & MAX77620_IRQ_TJALRM2_MASK) | 
|  | *temp = MAX77620_TJALARM2_TEMP; | 
|  | else if (val & MAX77620_IRQ_TJALRM1_MASK) | 
|  | *temp = MAX77620_TJALARM1_TEMP; | 
|  | else | 
|  | *temp = MAX77620_NORMAL_OPERATING_TEMP; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct thermal_zone_of_device_ops max77620_thermal_ops = { | 
|  | .get_temp = max77620_thermal_read_temp, | 
|  | }; | 
|  |  | 
|  | static irqreturn_t max77620_thermal_irq(int irq, void *data) | 
|  | { | 
|  | struct max77620_therm_info *mtherm = data; | 
|  |  | 
|  | if (irq == mtherm->irq_tjalarm1) | 
|  | dev_warn(mtherm->dev, "Junction Temp Alarm1(120C) occurred\n"); | 
|  | else if (irq == mtherm->irq_tjalarm2) | 
|  | dev_crit(mtherm->dev, "Junction Temp Alarm2(140C) occurred\n"); | 
|  |  | 
|  | thermal_zone_device_update(mtherm->tz_device, | 
|  | THERMAL_EVENT_UNSPECIFIED); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static int max77620_thermal_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct max77620_therm_info *mtherm; | 
|  | int ret; | 
|  |  | 
|  | mtherm = devm_kzalloc(&pdev->dev, sizeof(*mtherm), GFP_KERNEL); | 
|  | if (!mtherm) | 
|  | return -ENOMEM; | 
|  |  | 
|  | mtherm->irq_tjalarm1 = platform_get_irq(pdev, 0); | 
|  | mtherm->irq_tjalarm2 = platform_get_irq(pdev, 1); | 
|  | if ((mtherm->irq_tjalarm1 < 0) || (mtherm->irq_tjalarm2 < 0)) { | 
|  | dev_err(&pdev->dev, "Alarm irq number not available\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | mtherm->dev = &pdev->dev; | 
|  | mtherm->rmap = dev_get_regmap(pdev->dev.parent, NULL); | 
|  | if (!mtherm->rmap) { | 
|  | dev_err(&pdev->dev, "Failed to get parent regmap\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The reference taken to the parent's node which will be balanced on | 
|  | * reprobe or on platform-device release. | 
|  | */ | 
|  | device_set_of_node_from_dev(&pdev->dev, pdev->dev.parent); | 
|  |  | 
|  | mtherm->tz_device = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, | 
|  | mtherm, &max77620_thermal_ops); | 
|  | if (IS_ERR(mtherm->tz_device)) { | 
|  | ret = PTR_ERR(mtherm->tz_device); | 
|  | dev_err(&pdev->dev, "Failed to register thermal zone: %d\n", | 
|  | ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = devm_request_threaded_irq(&pdev->dev, mtherm->irq_tjalarm1, NULL, | 
|  | max77620_thermal_irq, | 
|  | IRQF_ONESHOT | IRQF_SHARED, | 
|  | dev_name(&pdev->dev), mtherm); | 
|  | if (ret < 0) { | 
|  | dev_err(&pdev->dev, "Failed to request irq1: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = devm_request_threaded_irq(&pdev->dev, mtherm->irq_tjalarm2, NULL, | 
|  | max77620_thermal_irq, | 
|  | IRQF_ONESHOT | IRQF_SHARED, | 
|  | dev_name(&pdev->dev), mtherm); | 
|  | if (ret < 0) { | 
|  | dev_err(&pdev->dev, "Failed to request irq2: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | platform_set_drvdata(pdev, mtherm); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct platform_device_id max77620_thermal_devtype[] = { | 
|  | { .name = "max77620-thermal", }, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(platform, max77620_thermal_devtype); | 
|  |  | 
|  | static struct platform_driver max77620_thermal_driver = { | 
|  | .driver = { | 
|  | .name = "max77620-thermal", | 
|  | }, | 
|  | .probe = max77620_thermal_probe, | 
|  | .id_table = max77620_thermal_devtype, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(max77620_thermal_driver); | 
|  |  | 
|  | MODULE_DESCRIPTION("Max77620 Junction temperature Thermal driver"); | 
|  | MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); | 
|  | MODULE_AUTHOR("Mallikarjun Kasoju <mkasoju@nvidia.com>"); | 
|  | MODULE_LICENSE("GPL v2"); |