|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * MFD core driver for the X-Powers' Power Management ICs | 
|  | * | 
|  | * AXP20x typically comprises an adaptive USB-Compatible PWM charger, BUCK DC-DC | 
|  | * converters, LDOs, multiple 12-bit ADCs of voltage, current and temperature | 
|  | * as well as configurable GPIOs. | 
|  | * | 
|  | * This file contains the interface independent core functions. | 
|  | * | 
|  | * Copyright (C) 2014 Carlo Caione | 
|  | * | 
|  | * Author: Carlo Caione <carlo@caione.org> | 
|  | */ | 
|  |  | 
|  | #include <linux/acpi.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/mfd/axp20x.h> | 
|  | #include <linux/mfd/core.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/of_device.h> | 
|  | #include <linux/pm_runtime.h> | 
|  | #include <linux/regmap.h> | 
|  | #include <linux/regulator/consumer.h> | 
|  |  | 
|  | #define AXP20X_OFF	BIT(7) | 
|  |  | 
|  | #define AXP806_REG_ADDR_EXT_ADDR_MASTER_MODE	0 | 
|  | #define AXP806_REG_ADDR_EXT_ADDR_SLAVE_MODE	BIT(4) | 
|  |  | 
|  | static const char * const axp20x_model_names[] = { | 
|  | "AXP152", | 
|  | "AXP202", | 
|  | "AXP209", | 
|  | "AXP221", | 
|  | "AXP223", | 
|  | "AXP288", | 
|  | "AXP803", | 
|  | "AXP806", | 
|  | "AXP809", | 
|  | "AXP813", | 
|  | }; | 
|  |  | 
|  | static const struct regmap_range axp152_writeable_ranges[] = { | 
|  | regmap_reg_range(AXP152_LDO3456_DC1234_CTRL, AXP152_IRQ3_STATE), | 
|  | regmap_reg_range(AXP152_DCDC_MODE, AXP152_PWM1_DUTY_CYCLE), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_range axp152_volatile_ranges[] = { | 
|  | regmap_reg_range(AXP152_PWR_OP_MODE, AXP152_PWR_OP_MODE), | 
|  | regmap_reg_range(AXP152_IRQ1_EN, AXP152_IRQ3_STATE), | 
|  | regmap_reg_range(AXP152_GPIO_INPUT, AXP152_GPIO_INPUT), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_access_table axp152_writeable_table = { | 
|  | .yes_ranges	= axp152_writeable_ranges, | 
|  | .n_yes_ranges	= ARRAY_SIZE(axp152_writeable_ranges), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_access_table axp152_volatile_table = { | 
|  | .yes_ranges	= axp152_volatile_ranges, | 
|  | .n_yes_ranges	= ARRAY_SIZE(axp152_volatile_ranges), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_range axp20x_writeable_ranges[] = { | 
|  | regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE), | 
|  | regmap_reg_range(AXP20X_CHRG_CTRL1, AXP20X_CHRG_CTRL2), | 
|  | regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES), | 
|  | regmap_reg_range(AXP20X_RDC_H, AXP20X_OCV(AXP20X_OCV_MAX)), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_range axp20x_volatile_ranges[] = { | 
|  | regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP20X_USB_OTG_STATUS), | 
|  | regmap_reg_range(AXP20X_CHRG_CTRL1, AXP20X_CHRG_CTRL2), | 
|  | regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE), | 
|  | regmap_reg_range(AXP20X_ACIN_V_ADC_H, AXP20X_IPSOUT_V_HIGH_L), | 
|  | regmap_reg_range(AXP20X_GPIO20_SS, AXP20X_GPIO3_CTRL), | 
|  | regmap_reg_range(AXP20X_FG_RES, AXP20X_RDC_L), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_access_table axp20x_writeable_table = { | 
|  | .yes_ranges	= axp20x_writeable_ranges, | 
|  | .n_yes_ranges	= ARRAY_SIZE(axp20x_writeable_ranges), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_access_table axp20x_volatile_table = { | 
|  | .yes_ranges	= axp20x_volatile_ranges, | 
|  | .n_yes_ranges	= ARRAY_SIZE(axp20x_volatile_ranges), | 
|  | }; | 
|  |  | 
|  | /* AXP22x ranges are shared with the AXP809, as they cover the same range */ | 
|  | static const struct regmap_range axp22x_writeable_ranges[] = { | 
|  | regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE), | 
|  | regmap_reg_range(AXP20X_CHRG_CTRL1, AXP22X_CHRG_CTRL3), | 
|  | regmap_reg_range(AXP20X_DCDC_MODE, AXP22X_BATLOW_THRES1), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_range axp22x_volatile_ranges[] = { | 
|  | regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP20X_PWR_OP_MODE), | 
|  | regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE), | 
|  | regmap_reg_range(AXP22X_GPIO_STATE, AXP22X_GPIO_STATE), | 
|  | regmap_reg_range(AXP22X_PMIC_TEMP_H, AXP20X_IPSOUT_V_HIGH_L), | 
|  | regmap_reg_range(AXP20X_FG_RES, AXP20X_FG_RES), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_access_table axp22x_writeable_table = { | 
|  | .yes_ranges	= axp22x_writeable_ranges, | 
|  | .n_yes_ranges	= ARRAY_SIZE(axp22x_writeable_ranges), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_access_table axp22x_volatile_table = { | 
|  | .yes_ranges	= axp22x_volatile_ranges, | 
|  | .n_yes_ranges	= ARRAY_SIZE(axp22x_volatile_ranges), | 
|  | }; | 
|  |  | 
|  | /* AXP288 ranges are shared with the AXP803, as they cover the same range */ | 
|  | static const struct regmap_range axp288_writeable_ranges[] = { | 
|  | regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ6_STATE), | 
|  | regmap_reg_range(AXP20X_DCDC_MODE, AXP288_FG_TUNE5), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_range axp288_volatile_ranges[] = { | 
|  | regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP288_POWER_REASON), | 
|  | regmap_reg_range(AXP22X_PWR_OUT_CTRL1, AXP22X_ALDO3_V_OUT), | 
|  | regmap_reg_range(AXP288_BC_GLOBAL, AXP288_BC_GLOBAL), | 
|  | regmap_reg_range(AXP288_BC_DET_STAT, AXP20X_VBUS_IPSOUT_MGMT), | 
|  | regmap_reg_range(AXP20X_CHRG_BAK_CTRL, AXP20X_CHRG_BAK_CTRL), | 
|  | regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IPSOUT_V_HIGH_L), | 
|  | regmap_reg_range(AXP20X_TIMER_CTRL, AXP20X_TIMER_CTRL), | 
|  | regmap_reg_range(AXP20X_GPIO1_CTRL, AXP22X_GPIO_STATE), | 
|  | regmap_reg_range(AXP288_RT_BATT_V_H, AXP288_RT_BATT_V_L), | 
|  | regmap_reg_range(AXP20X_FG_RES, AXP288_FG_CC_CAP_REG), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_access_table axp288_writeable_table = { | 
|  | .yes_ranges	= axp288_writeable_ranges, | 
|  | .n_yes_ranges	= ARRAY_SIZE(axp288_writeable_ranges), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_access_table axp288_volatile_table = { | 
|  | .yes_ranges	= axp288_volatile_ranges, | 
|  | .n_yes_ranges	= ARRAY_SIZE(axp288_volatile_ranges), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_range axp806_writeable_ranges[] = { | 
|  | regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_DATACACHE(3)), | 
|  | regmap_reg_range(AXP806_PWR_OUT_CTRL1, AXP806_CLDO3_V_CTRL), | 
|  | regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ2_EN), | 
|  | regmap_reg_range(AXP20X_IRQ1_STATE, AXP20X_IRQ2_STATE), | 
|  | regmap_reg_range(AXP806_REG_ADDR_EXT, AXP806_REG_ADDR_EXT), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_range axp806_volatile_ranges[] = { | 
|  | regmap_reg_range(AXP20X_IRQ1_STATE, AXP20X_IRQ2_STATE), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_access_table axp806_writeable_table = { | 
|  | .yes_ranges	= axp806_writeable_ranges, | 
|  | .n_yes_ranges	= ARRAY_SIZE(axp806_writeable_ranges), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_access_table axp806_volatile_table = { | 
|  | .yes_ranges	= axp806_volatile_ranges, | 
|  | .n_yes_ranges	= ARRAY_SIZE(axp806_volatile_ranges), | 
|  | }; | 
|  |  | 
|  | static const struct resource axp152_pek_resources[] = { | 
|  | DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_RIS_EDGE, "PEK_DBR"), | 
|  | DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_FAL_EDGE, "PEK_DBF"), | 
|  | }; | 
|  |  | 
|  | static const struct resource axp20x_ac_power_supply_resources[] = { | 
|  | DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_PLUGIN, "ACIN_PLUGIN"), | 
|  | DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_REMOVAL, "ACIN_REMOVAL"), | 
|  | DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_ACIN_OVER_V, "ACIN_OVER_V"), | 
|  | }; | 
|  |  | 
|  | static const struct resource axp20x_pek_resources[] = { | 
|  | DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_PEK_RIS_EDGE, "PEK_DBR"), | 
|  | DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_PEK_FAL_EDGE, "PEK_DBF"), | 
|  | }; | 
|  |  | 
|  | static const struct resource axp20x_usb_power_supply_resources[] = { | 
|  | DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_PLUGIN, "VBUS_PLUGIN"), | 
|  | DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"), | 
|  | DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_VALID, "VBUS_VALID"), | 
|  | DEFINE_RES_IRQ_NAMED(AXP20X_IRQ_VBUS_NOT_VALID, "VBUS_NOT_VALID"), | 
|  | }; | 
|  |  | 
|  | static const struct resource axp22x_usb_power_supply_resources[] = { | 
|  | DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_VBUS_PLUGIN, "VBUS_PLUGIN"), | 
|  | DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"), | 
|  | }; | 
|  |  | 
|  | /* AXP803 and AXP813/AXP818 share the same interrupts */ | 
|  | static const struct resource axp803_usb_power_supply_resources[] = { | 
|  | DEFINE_RES_IRQ_NAMED(AXP803_IRQ_VBUS_PLUGIN, "VBUS_PLUGIN"), | 
|  | DEFINE_RES_IRQ_NAMED(AXP803_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"), | 
|  | }; | 
|  |  | 
|  | static const struct resource axp22x_pek_resources[] = { | 
|  | DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_PEK_RIS_EDGE, "PEK_DBR"), | 
|  | DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_PEK_FAL_EDGE, "PEK_DBF"), | 
|  | }; | 
|  |  | 
|  | static const struct resource axp288_power_button_resources[] = { | 
|  | DEFINE_RES_IRQ_NAMED(AXP288_IRQ_POKP, "PEK_DBR"), | 
|  | DEFINE_RES_IRQ_NAMED(AXP288_IRQ_POKN, "PEK_DBF"), | 
|  | }; | 
|  |  | 
|  | static const struct resource axp288_fuel_gauge_resources[] = { | 
|  | DEFINE_RES_IRQ(AXP288_IRQ_QWBTU), | 
|  | DEFINE_RES_IRQ(AXP288_IRQ_WBTU), | 
|  | DEFINE_RES_IRQ(AXP288_IRQ_QWBTO), | 
|  | DEFINE_RES_IRQ(AXP288_IRQ_WBTO), | 
|  | DEFINE_RES_IRQ(AXP288_IRQ_WL2), | 
|  | DEFINE_RES_IRQ(AXP288_IRQ_WL1), | 
|  | }; | 
|  |  | 
|  | static const struct resource axp803_pek_resources[] = { | 
|  | DEFINE_RES_IRQ_NAMED(AXP803_IRQ_PEK_RIS_EDGE, "PEK_DBR"), | 
|  | DEFINE_RES_IRQ_NAMED(AXP803_IRQ_PEK_FAL_EDGE, "PEK_DBF"), | 
|  | }; | 
|  |  | 
|  | static const struct resource axp806_pek_resources[] = { | 
|  | DEFINE_RES_IRQ_NAMED(AXP806_IRQ_POK_RISE, "PEK_DBR"), | 
|  | DEFINE_RES_IRQ_NAMED(AXP806_IRQ_POK_FALL, "PEK_DBF"), | 
|  | }; | 
|  |  | 
|  | static const struct resource axp809_pek_resources[] = { | 
|  | DEFINE_RES_IRQ_NAMED(AXP809_IRQ_PEK_RIS_EDGE, "PEK_DBR"), | 
|  | DEFINE_RES_IRQ_NAMED(AXP809_IRQ_PEK_FAL_EDGE, "PEK_DBF"), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_config axp152_regmap_config = { | 
|  | .reg_bits	= 8, | 
|  | .val_bits	= 8, | 
|  | .wr_table	= &axp152_writeable_table, | 
|  | .volatile_table	= &axp152_volatile_table, | 
|  | .max_register	= AXP152_PWM1_DUTY_CYCLE, | 
|  | .cache_type	= REGCACHE_RBTREE, | 
|  | }; | 
|  |  | 
|  | static const struct regmap_config axp20x_regmap_config = { | 
|  | .reg_bits	= 8, | 
|  | .val_bits	= 8, | 
|  | .wr_table	= &axp20x_writeable_table, | 
|  | .volatile_table	= &axp20x_volatile_table, | 
|  | .max_register	= AXP20X_OCV(AXP20X_OCV_MAX), | 
|  | .cache_type	= REGCACHE_RBTREE, | 
|  | }; | 
|  |  | 
|  | static const struct regmap_config axp22x_regmap_config = { | 
|  | .reg_bits	= 8, | 
|  | .val_bits	= 8, | 
|  | .wr_table	= &axp22x_writeable_table, | 
|  | .volatile_table	= &axp22x_volatile_table, | 
|  | .max_register	= AXP22X_BATLOW_THRES1, | 
|  | .cache_type	= REGCACHE_RBTREE, | 
|  | }; | 
|  |  | 
|  | static const struct regmap_config axp288_regmap_config = { | 
|  | .reg_bits	= 8, | 
|  | .val_bits	= 8, | 
|  | .wr_table	= &axp288_writeable_table, | 
|  | .volatile_table	= &axp288_volatile_table, | 
|  | .max_register	= AXP288_FG_TUNE5, | 
|  | .cache_type	= REGCACHE_RBTREE, | 
|  | }; | 
|  |  | 
|  | static const struct regmap_config axp806_regmap_config = { | 
|  | .reg_bits	= 8, | 
|  | .val_bits	= 8, | 
|  | .wr_table	= &axp806_writeable_table, | 
|  | .volatile_table	= &axp806_volatile_table, | 
|  | .max_register	= AXP806_REG_ADDR_EXT, | 
|  | .cache_type	= REGCACHE_RBTREE, | 
|  | }; | 
|  |  | 
|  | #define INIT_REGMAP_IRQ(_variant, _irq, _off, _mask)			\ | 
|  | [_variant##_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) } | 
|  |  | 
|  | static const struct regmap_irq axp152_regmap_irqs[] = { | 
|  | INIT_REGMAP_IRQ(AXP152, LDO0IN_CONNECT,		0, 6), | 
|  | INIT_REGMAP_IRQ(AXP152, LDO0IN_REMOVAL,		0, 5), | 
|  | INIT_REGMAP_IRQ(AXP152, ALDO0IN_CONNECT,	0, 3), | 
|  | INIT_REGMAP_IRQ(AXP152, ALDO0IN_REMOVAL,	0, 2), | 
|  | INIT_REGMAP_IRQ(AXP152, DCDC1_V_LOW,		1, 5), | 
|  | INIT_REGMAP_IRQ(AXP152, DCDC2_V_LOW,		1, 4), | 
|  | INIT_REGMAP_IRQ(AXP152, DCDC3_V_LOW,		1, 3), | 
|  | INIT_REGMAP_IRQ(AXP152, DCDC4_V_LOW,		1, 2), | 
|  | INIT_REGMAP_IRQ(AXP152, PEK_SHORT,		1, 1), | 
|  | INIT_REGMAP_IRQ(AXP152, PEK_LONG,		1, 0), | 
|  | INIT_REGMAP_IRQ(AXP152, TIMER,			2, 7), | 
|  | INIT_REGMAP_IRQ(AXP152, PEK_RIS_EDGE,		2, 6), | 
|  | INIT_REGMAP_IRQ(AXP152, PEK_FAL_EDGE,		2, 5), | 
|  | INIT_REGMAP_IRQ(AXP152, GPIO3_INPUT,		2, 3), | 
|  | INIT_REGMAP_IRQ(AXP152, GPIO2_INPUT,		2, 2), | 
|  | INIT_REGMAP_IRQ(AXP152, GPIO1_INPUT,		2, 1), | 
|  | INIT_REGMAP_IRQ(AXP152, GPIO0_INPUT,		2, 0), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_irq axp20x_regmap_irqs[] = { | 
|  | INIT_REGMAP_IRQ(AXP20X, ACIN_OVER_V,		0, 7), | 
|  | INIT_REGMAP_IRQ(AXP20X, ACIN_PLUGIN,		0, 6), | 
|  | INIT_REGMAP_IRQ(AXP20X, ACIN_REMOVAL,	        0, 5), | 
|  | INIT_REGMAP_IRQ(AXP20X, VBUS_OVER_V,		0, 4), | 
|  | INIT_REGMAP_IRQ(AXP20X, VBUS_PLUGIN,		0, 3), | 
|  | INIT_REGMAP_IRQ(AXP20X, VBUS_REMOVAL,	        0, 2), | 
|  | INIT_REGMAP_IRQ(AXP20X, VBUS_V_LOW,		0, 1), | 
|  | INIT_REGMAP_IRQ(AXP20X, BATT_PLUGIN,		1, 7), | 
|  | INIT_REGMAP_IRQ(AXP20X, BATT_REMOVAL,	        1, 6), | 
|  | INIT_REGMAP_IRQ(AXP20X, BATT_ENT_ACT_MODE,	1, 5), | 
|  | INIT_REGMAP_IRQ(AXP20X, BATT_EXIT_ACT_MODE,	1, 4), | 
|  | INIT_REGMAP_IRQ(AXP20X, CHARG,		        1, 3), | 
|  | INIT_REGMAP_IRQ(AXP20X, CHARG_DONE,		1, 2), | 
|  | INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_HIGH,	        1, 1), | 
|  | INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_LOW,	        1, 0), | 
|  | INIT_REGMAP_IRQ(AXP20X, DIE_TEMP_HIGH,	        2, 7), | 
|  | INIT_REGMAP_IRQ(AXP20X, CHARG_I_LOW,		2, 6), | 
|  | INIT_REGMAP_IRQ(AXP20X, DCDC1_V_LONG,	        2, 5), | 
|  | INIT_REGMAP_IRQ(AXP20X, DCDC2_V_LONG,	        2, 4), | 
|  | INIT_REGMAP_IRQ(AXP20X, DCDC3_V_LONG,	        2, 3), | 
|  | INIT_REGMAP_IRQ(AXP20X, PEK_SHORT,		2, 1), | 
|  | INIT_REGMAP_IRQ(AXP20X, PEK_LONG,		2, 0), | 
|  | INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_ON,		3, 7), | 
|  | INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_OFF,	        3, 6), | 
|  | INIT_REGMAP_IRQ(AXP20X, VBUS_VALID,		3, 5), | 
|  | INIT_REGMAP_IRQ(AXP20X, VBUS_NOT_VALID,	        3, 4), | 
|  | INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_VALID,	3, 3), | 
|  | INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_END,	        3, 2), | 
|  | INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL1,	        3, 1), | 
|  | INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL2,	        3, 0), | 
|  | INIT_REGMAP_IRQ(AXP20X, TIMER,		        4, 7), | 
|  | INIT_REGMAP_IRQ(AXP20X, PEK_RIS_EDGE,	        4, 6), | 
|  | INIT_REGMAP_IRQ(AXP20X, PEK_FAL_EDGE,	        4, 5), | 
|  | INIT_REGMAP_IRQ(AXP20X, GPIO3_INPUT,		4, 3), | 
|  | INIT_REGMAP_IRQ(AXP20X, GPIO2_INPUT,		4, 2), | 
|  | INIT_REGMAP_IRQ(AXP20X, GPIO1_INPUT,		4, 1), | 
|  | INIT_REGMAP_IRQ(AXP20X, GPIO0_INPUT,		4, 0), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_irq axp22x_regmap_irqs[] = { | 
|  | INIT_REGMAP_IRQ(AXP22X, ACIN_OVER_V,		0, 7), | 
|  | INIT_REGMAP_IRQ(AXP22X, ACIN_PLUGIN,		0, 6), | 
|  | INIT_REGMAP_IRQ(AXP22X, ACIN_REMOVAL,	        0, 5), | 
|  | INIT_REGMAP_IRQ(AXP22X, VBUS_OVER_V,		0, 4), | 
|  | INIT_REGMAP_IRQ(AXP22X, VBUS_PLUGIN,		0, 3), | 
|  | INIT_REGMAP_IRQ(AXP22X, VBUS_REMOVAL,	        0, 2), | 
|  | INIT_REGMAP_IRQ(AXP22X, VBUS_V_LOW,		0, 1), | 
|  | INIT_REGMAP_IRQ(AXP22X, BATT_PLUGIN,		1, 7), | 
|  | INIT_REGMAP_IRQ(AXP22X, BATT_REMOVAL,	        1, 6), | 
|  | INIT_REGMAP_IRQ(AXP22X, BATT_ENT_ACT_MODE,	1, 5), | 
|  | INIT_REGMAP_IRQ(AXP22X, BATT_EXIT_ACT_MODE,	1, 4), | 
|  | INIT_REGMAP_IRQ(AXP22X, CHARG,		        1, 3), | 
|  | INIT_REGMAP_IRQ(AXP22X, CHARG_DONE,		1, 2), | 
|  | INIT_REGMAP_IRQ(AXP22X, BATT_TEMP_HIGH,	        1, 1), | 
|  | INIT_REGMAP_IRQ(AXP22X, BATT_TEMP_LOW,	        1, 0), | 
|  | INIT_REGMAP_IRQ(AXP22X, DIE_TEMP_HIGH,	        2, 7), | 
|  | INIT_REGMAP_IRQ(AXP22X, PEK_SHORT,		2, 1), | 
|  | INIT_REGMAP_IRQ(AXP22X, PEK_LONG,		2, 0), | 
|  | INIT_REGMAP_IRQ(AXP22X, LOW_PWR_LVL1,	        3, 1), | 
|  | INIT_REGMAP_IRQ(AXP22X, LOW_PWR_LVL2,	        3, 0), | 
|  | INIT_REGMAP_IRQ(AXP22X, TIMER,		        4, 7), | 
|  | INIT_REGMAP_IRQ(AXP22X, PEK_RIS_EDGE,	        4, 6), | 
|  | INIT_REGMAP_IRQ(AXP22X, PEK_FAL_EDGE,	        4, 5), | 
|  | INIT_REGMAP_IRQ(AXP22X, GPIO1_INPUT,		4, 1), | 
|  | INIT_REGMAP_IRQ(AXP22X, GPIO0_INPUT,		4, 0), | 
|  | }; | 
|  |  | 
|  | /* some IRQs are compatible with axp20x models */ | 
|  | static const struct regmap_irq axp288_regmap_irqs[] = { | 
|  | INIT_REGMAP_IRQ(AXP288, VBUS_FALL,              0, 2), | 
|  | INIT_REGMAP_IRQ(AXP288, VBUS_RISE,              0, 3), | 
|  | INIT_REGMAP_IRQ(AXP288, OV,                     0, 4), | 
|  | INIT_REGMAP_IRQ(AXP288, FALLING_ALT,            0, 5), | 
|  | INIT_REGMAP_IRQ(AXP288, RISING_ALT,             0, 6), | 
|  | INIT_REGMAP_IRQ(AXP288, OV_ALT,                 0, 7), | 
|  |  | 
|  | INIT_REGMAP_IRQ(AXP288, DONE,                   1, 2), | 
|  | INIT_REGMAP_IRQ(AXP288, CHARGING,               1, 3), | 
|  | INIT_REGMAP_IRQ(AXP288, SAFE_QUIT,              1, 4), | 
|  | INIT_REGMAP_IRQ(AXP288, SAFE_ENTER,             1, 5), | 
|  | INIT_REGMAP_IRQ(AXP288, ABSENT,                 1, 6), | 
|  | INIT_REGMAP_IRQ(AXP288, APPEND,                 1, 7), | 
|  |  | 
|  | INIT_REGMAP_IRQ(AXP288, QWBTU,                  2, 0), | 
|  | INIT_REGMAP_IRQ(AXP288, WBTU,                   2, 1), | 
|  | INIT_REGMAP_IRQ(AXP288, QWBTO,                  2, 2), | 
|  | INIT_REGMAP_IRQ(AXP288, WBTO,                   2, 3), | 
|  | INIT_REGMAP_IRQ(AXP288, QCBTU,                  2, 4), | 
|  | INIT_REGMAP_IRQ(AXP288, CBTU,                   2, 5), | 
|  | INIT_REGMAP_IRQ(AXP288, QCBTO,                  2, 6), | 
|  | INIT_REGMAP_IRQ(AXP288, CBTO,                   2, 7), | 
|  |  | 
|  | INIT_REGMAP_IRQ(AXP288, WL2,                    3, 0), | 
|  | INIT_REGMAP_IRQ(AXP288, WL1,                    3, 1), | 
|  | INIT_REGMAP_IRQ(AXP288, GPADC,                  3, 2), | 
|  | INIT_REGMAP_IRQ(AXP288, OT,                     3, 7), | 
|  |  | 
|  | INIT_REGMAP_IRQ(AXP288, GPIO0,                  4, 0), | 
|  | INIT_REGMAP_IRQ(AXP288, GPIO1,                  4, 1), | 
|  | INIT_REGMAP_IRQ(AXP288, POKO,                   4, 2), | 
|  | INIT_REGMAP_IRQ(AXP288, POKL,                   4, 3), | 
|  | INIT_REGMAP_IRQ(AXP288, POKS,                   4, 4), | 
|  | INIT_REGMAP_IRQ(AXP288, POKN,                   4, 5), | 
|  | INIT_REGMAP_IRQ(AXP288, POKP,                   4, 6), | 
|  | INIT_REGMAP_IRQ(AXP288, TIMER,                  4, 7), | 
|  |  | 
|  | INIT_REGMAP_IRQ(AXP288, MV_CHNG,                5, 0), | 
|  | INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG,            5, 1), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_irq axp803_regmap_irqs[] = { | 
|  | INIT_REGMAP_IRQ(AXP803, ACIN_OVER_V,		0, 7), | 
|  | INIT_REGMAP_IRQ(AXP803, ACIN_PLUGIN,		0, 6), | 
|  | INIT_REGMAP_IRQ(AXP803, ACIN_REMOVAL,	        0, 5), | 
|  | INIT_REGMAP_IRQ(AXP803, VBUS_OVER_V,		0, 4), | 
|  | INIT_REGMAP_IRQ(AXP803, VBUS_PLUGIN,		0, 3), | 
|  | INIT_REGMAP_IRQ(AXP803, VBUS_REMOVAL,	        0, 2), | 
|  | INIT_REGMAP_IRQ(AXP803, BATT_PLUGIN,		1, 7), | 
|  | INIT_REGMAP_IRQ(AXP803, BATT_REMOVAL,	        1, 6), | 
|  | INIT_REGMAP_IRQ(AXP803, BATT_ENT_ACT_MODE,	1, 5), | 
|  | INIT_REGMAP_IRQ(AXP803, BATT_EXIT_ACT_MODE,	1, 4), | 
|  | INIT_REGMAP_IRQ(AXP803, CHARG,		        1, 3), | 
|  | INIT_REGMAP_IRQ(AXP803, CHARG_DONE,		1, 2), | 
|  | INIT_REGMAP_IRQ(AXP803, BATT_CHG_TEMP_HIGH,	2, 7), | 
|  | INIT_REGMAP_IRQ(AXP803, BATT_CHG_TEMP_HIGH_END,	2, 6), | 
|  | INIT_REGMAP_IRQ(AXP803, BATT_CHG_TEMP_LOW,	2, 5), | 
|  | INIT_REGMAP_IRQ(AXP803, BATT_CHG_TEMP_LOW_END,	2, 4), | 
|  | INIT_REGMAP_IRQ(AXP803, BATT_ACT_TEMP_HIGH,	2, 3), | 
|  | INIT_REGMAP_IRQ(AXP803, BATT_ACT_TEMP_HIGH_END,	2, 2), | 
|  | INIT_REGMAP_IRQ(AXP803, BATT_ACT_TEMP_LOW,	2, 1), | 
|  | INIT_REGMAP_IRQ(AXP803, BATT_ACT_TEMP_LOW_END,	2, 0), | 
|  | INIT_REGMAP_IRQ(AXP803, DIE_TEMP_HIGH,	        3, 7), | 
|  | INIT_REGMAP_IRQ(AXP803, GPADC,		        3, 2), | 
|  | INIT_REGMAP_IRQ(AXP803, LOW_PWR_LVL1,	        3, 1), | 
|  | INIT_REGMAP_IRQ(AXP803, LOW_PWR_LVL2,	        3, 0), | 
|  | INIT_REGMAP_IRQ(AXP803, TIMER,		        4, 7), | 
|  | INIT_REGMAP_IRQ(AXP803, PEK_RIS_EDGE,	        4, 6), | 
|  | INIT_REGMAP_IRQ(AXP803, PEK_FAL_EDGE,	        4, 5), | 
|  | INIT_REGMAP_IRQ(AXP803, PEK_SHORT,		4, 4), | 
|  | INIT_REGMAP_IRQ(AXP803, PEK_LONG,		4, 3), | 
|  | INIT_REGMAP_IRQ(AXP803, PEK_OVER_OFF,		4, 2), | 
|  | INIT_REGMAP_IRQ(AXP803, GPIO1_INPUT,		4, 1), | 
|  | INIT_REGMAP_IRQ(AXP803, GPIO0_INPUT,		4, 0), | 
|  | INIT_REGMAP_IRQ(AXP803, BC_USB_CHNG,            5, 1), | 
|  | INIT_REGMAP_IRQ(AXP803, MV_CHNG,                5, 0), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_irq axp806_regmap_irqs[] = { | 
|  | INIT_REGMAP_IRQ(AXP806, DIE_TEMP_HIGH_LV1,	0, 0), | 
|  | INIT_REGMAP_IRQ(AXP806, DIE_TEMP_HIGH_LV2,	0, 1), | 
|  | INIT_REGMAP_IRQ(AXP806, DCDCA_V_LOW,		0, 3), | 
|  | INIT_REGMAP_IRQ(AXP806, DCDCB_V_LOW,		0, 4), | 
|  | INIT_REGMAP_IRQ(AXP806, DCDCC_V_LOW,		0, 5), | 
|  | INIT_REGMAP_IRQ(AXP806, DCDCD_V_LOW,		0, 6), | 
|  | INIT_REGMAP_IRQ(AXP806, DCDCE_V_LOW,		0, 7), | 
|  | INIT_REGMAP_IRQ(AXP806, POK_LONG,		1, 0), | 
|  | INIT_REGMAP_IRQ(AXP806, POK_SHORT,		1, 1), | 
|  | INIT_REGMAP_IRQ(AXP806, WAKEUP,			1, 4), | 
|  | INIT_REGMAP_IRQ(AXP806, POK_FALL,		1, 5), | 
|  | INIT_REGMAP_IRQ(AXP806, POK_RISE,		1, 6), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_irq axp809_regmap_irqs[] = { | 
|  | INIT_REGMAP_IRQ(AXP809, ACIN_OVER_V,		0, 7), | 
|  | INIT_REGMAP_IRQ(AXP809, ACIN_PLUGIN,		0, 6), | 
|  | INIT_REGMAP_IRQ(AXP809, ACIN_REMOVAL,	        0, 5), | 
|  | INIT_REGMAP_IRQ(AXP809, VBUS_OVER_V,		0, 4), | 
|  | INIT_REGMAP_IRQ(AXP809, VBUS_PLUGIN,		0, 3), | 
|  | INIT_REGMAP_IRQ(AXP809, VBUS_REMOVAL,	        0, 2), | 
|  | INIT_REGMAP_IRQ(AXP809, VBUS_V_LOW,		0, 1), | 
|  | INIT_REGMAP_IRQ(AXP809, BATT_PLUGIN,		1, 7), | 
|  | INIT_REGMAP_IRQ(AXP809, BATT_REMOVAL,	        1, 6), | 
|  | INIT_REGMAP_IRQ(AXP809, BATT_ENT_ACT_MODE,	1, 5), | 
|  | INIT_REGMAP_IRQ(AXP809, BATT_EXIT_ACT_MODE,	1, 4), | 
|  | INIT_REGMAP_IRQ(AXP809, CHARG,		        1, 3), | 
|  | INIT_REGMAP_IRQ(AXP809, CHARG_DONE,		1, 2), | 
|  | INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_HIGH,	2, 7), | 
|  | INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_HIGH_END,	2, 6), | 
|  | INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_LOW,	2, 5), | 
|  | INIT_REGMAP_IRQ(AXP809, BATT_CHG_TEMP_LOW_END,	2, 4), | 
|  | INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_HIGH,	2, 3), | 
|  | INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_HIGH_END,	2, 2), | 
|  | INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_LOW,	2, 1), | 
|  | INIT_REGMAP_IRQ(AXP809, BATT_ACT_TEMP_LOW_END,	2, 0), | 
|  | INIT_REGMAP_IRQ(AXP809, DIE_TEMP_HIGH,	        3, 7), | 
|  | INIT_REGMAP_IRQ(AXP809, LOW_PWR_LVL1,	        3, 1), | 
|  | INIT_REGMAP_IRQ(AXP809, LOW_PWR_LVL2,	        3, 0), | 
|  | INIT_REGMAP_IRQ(AXP809, TIMER,		        4, 7), | 
|  | INIT_REGMAP_IRQ(AXP809, PEK_RIS_EDGE,	        4, 6), | 
|  | INIT_REGMAP_IRQ(AXP809, PEK_FAL_EDGE,	        4, 5), | 
|  | INIT_REGMAP_IRQ(AXP809, PEK_SHORT,		4, 4), | 
|  | INIT_REGMAP_IRQ(AXP809, PEK_LONG,		4, 3), | 
|  | INIT_REGMAP_IRQ(AXP809, PEK_OVER_OFF,		4, 2), | 
|  | INIT_REGMAP_IRQ(AXP809, GPIO1_INPUT,		4, 1), | 
|  | INIT_REGMAP_IRQ(AXP809, GPIO0_INPUT,		4, 0), | 
|  | }; | 
|  |  | 
|  | static const struct regmap_irq_chip axp152_regmap_irq_chip = { | 
|  | .name			= "axp152_irq_chip", | 
|  | .status_base		= AXP152_IRQ1_STATE, | 
|  | .ack_base		= AXP152_IRQ1_STATE, | 
|  | .mask_base		= AXP152_IRQ1_EN, | 
|  | .mask_invert		= true, | 
|  | .init_ack_masked	= true, | 
|  | .irqs			= axp152_regmap_irqs, | 
|  | .num_irqs		= ARRAY_SIZE(axp152_regmap_irqs), | 
|  | .num_regs		= 3, | 
|  | }; | 
|  |  | 
|  | static const struct regmap_irq_chip axp20x_regmap_irq_chip = { | 
|  | .name			= "axp20x_irq_chip", | 
|  | .status_base		= AXP20X_IRQ1_STATE, | 
|  | .ack_base		= AXP20X_IRQ1_STATE, | 
|  | .mask_base		= AXP20X_IRQ1_EN, | 
|  | .mask_invert		= true, | 
|  | .init_ack_masked	= true, | 
|  | .irqs			= axp20x_regmap_irqs, | 
|  | .num_irqs		= ARRAY_SIZE(axp20x_regmap_irqs), | 
|  | .num_regs		= 5, | 
|  |  | 
|  | }; | 
|  |  | 
|  | static const struct regmap_irq_chip axp22x_regmap_irq_chip = { | 
|  | .name			= "axp22x_irq_chip", | 
|  | .status_base		= AXP20X_IRQ1_STATE, | 
|  | .ack_base		= AXP20X_IRQ1_STATE, | 
|  | .mask_base		= AXP20X_IRQ1_EN, | 
|  | .mask_invert		= true, | 
|  | .init_ack_masked	= true, | 
|  | .irqs			= axp22x_regmap_irqs, | 
|  | .num_irqs		= ARRAY_SIZE(axp22x_regmap_irqs), | 
|  | .num_regs		= 5, | 
|  | }; | 
|  |  | 
|  | static const struct regmap_irq_chip axp288_regmap_irq_chip = { | 
|  | .name			= "axp288_irq_chip", | 
|  | .status_base		= AXP20X_IRQ1_STATE, | 
|  | .ack_base		= AXP20X_IRQ1_STATE, | 
|  | .mask_base		= AXP20X_IRQ1_EN, | 
|  | .mask_invert		= true, | 
|  | .init_ack_masked	= true, | 
|  | .irqs			= axp288_regmap_irqs, | 
|  | .num_irqs		= ARRAY_SIZE(axp288_regmap_irqs), | 
|  | .num_regs		= 6, | 
|  |  | 
|  | }; | 
|  |  | 
|  | static const struct regmap_irq_chip axp803_regmap_irq_chip = { | 
|  | .name			= "axp803", | 
|  | .status_base		= AXP20X_IRQ1_STATE, | 
|  | .ack_base		= AXP20X_IRQ1_STATE, | 
|  | .mask_base		= AXP20X_IRQ1_EN, | 
|  | .mask_invert		= true, | 
|  | .init_ack_masked	= true, | 
|  | .irqs			= axp803_regmap_irqs, | 
|  | .num_irqs		= ARRAY_SIZE(axp803_regmap_irqs), | 
|  | .num_regs		= 6, | 
|  | }; | 
|  |  | 
|  | static const struct regmap_irq_chip axp806_regmap_irq_chip = { | 
|  | .name			= "axp806", | 
|  | .status_base		= AXP20X_IRQ1_STATE, | 
|  | .ack_base		= AXP20X_IRQ1_STATE, | 
|  | .mask_base		= AXP20X_IRQ1_EN, | 
|  | .mask_invert		= true, | 
|  | .init_ack_masked	= true, | 
|  | .irqs			= axp806_regmap_irqs, | 
|  | .num_irqs		= ARRAY_SIZE(axp806_regmap_irqs), | 
|  | .num_regs		= 2, | 
|  | }; | 
|  |  | 
|  | static const struct regmap_irq_chip axp809_regmap_irq_chip = { | 
|  | .name			= "axp809", | 
|  | .status_base		= AXP20X_IRQ1_STATE, | 
|  | .ack_base		= AXP20X_IRQ1_STATE, | 
|  | .mask_base		= AXP20X_IRQ1_EN, | 
|  | .mask_invert		= true, | 
|  | .init_ack_masked	= true, | 
|  | .irqs			= axp809_regmap_irqs, | 
|  | .num_irqs		= ARRAY_SIZE(axp809_regmap_irqs), | 
|  | .num_regs		= 5, | 
|  | }; | 
|  |  | 
|  | static const struct mfd_cell axp20x_cells[] = { | 
|  | { | 
|  | .name		= "axp20x-gpio", | 
|  | .of_compatible	= "x-powers,axp209-gpio", | 
|  | }, { | 
|  | .name		= "axp20x-pek", | 
|  | .num_resources	= ARRAY_SIZE(axp20x_pek_resources), | 
|  | .resources	= axp20x_pek_resources, | 
|  | }, { | 
|  | .name		= "axp20x-regulator", | 
|  | }, { | 
|  | .name		= "axp20x-adc", | 
|  | .of_compatible	= "x-powers,axp209-adc", | 
|  | }, { | 
|  | .name		= "axp20x-battery-power-supply", | 
|  | .of_compatible	= "x-powers,axp209-battery-power-supply", | 
|  | }, { | 
|  | .name		= "axp20x-ac-power-supply", | 
|  | .of_compatible	= "x-powers,axp202-ac-power-supply", | 
|  | .num_resources	= ARRAY_SIZE(axp20x_ac_power_supply_resources), | 
|  | .resources	= axp20x_ac_power_supply_resources, | 
|  | }, { | 
|  | .name		= "axp20x-usb-power-supply", | 
|  | .of_compatible	= "x-powers,axp202-usb-power-supply", | 
|  | .num_resources	= ARRAY_SIZE(axp20x_usb_power_supply_resources), | 
|  | .resources	= axp20x_usb_power_supply_resources, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct mfd_cell axp221_cells[] = { | 
|  | { | 
|  | .name		= "axp221-pek", | 
|  | .num_resources	= ARRAY_SIZE(axp22x_pek_resources), | 
|  | .resources	= axp22x_pek_resources, | 
|  | }, { | 
|  | .name		= "axp20x-regulator", | 
|  | }, { | 
|  | .name		= "axp22x-adc", | 
|  | .of_compatible	= "x-powers,axp221-adc", | 
|  | }, { | 
|  | .name		= "axp20x-ac-power-supply", | 
|  | .of_compatible	= "x-powers,axp221-ac-power-supply", | 
|  | .num_resources	= ARRAY_SIZE(axp20x_ac_power_supply_resources), | 
|  | .resources	= axp20x_ac_power_supply_resources, | 
|  | }, { | 
|  | .name		= "axp20x-battery-power-supply", | 
|  | .of_compatible	= "x-powers,axp221-battery-power-supply", | 
|  | }, { | 
|  | .name		= "axp20x-usb-power-supply", | 
|  | .of_compatible	= "x-powers,axp221-usb-power-supply", | 
|  | .num_resources	= ARRAY_SIZE(axp22x_usb_power_supply_resources), | 
|  | .resources	= axp22x_usb_power_supply_resources, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct mfd_cell axp223_cells[] = { | 
|  | { | 
|  | .name		= "axp221-pek", | 
|  | .num_resources	= ARRAY_SIZE(axp22x_pek_resources), | 
|  | .resources	= axp22x_pek_resources, | 
|  | }, { | 
|  | .name		= "axp22x-adc", | 
|  | .of_compatible	= "x-powers,axp221-adc", | 
|  | }, { | 
|  | .name		= "axp20x-battery-power-supply", | 
|  | .of_compatible	= "x-powers,axp221-battery-power-supply", | 
|  | }, { | 
|  | .name		= "axp20x-regulator", | 
|  | }, { | 
|  | .name		= "axp20x-ac-power-supply", | 
|  | .of_compatible	= "x-powers,axp221-ac-power-supply", | 
|  | .num_resources	= ARRAY_SIZE(axp20x_ac_power_supply_resources), | 
|  | .resources	= axp20x_ac_power_supply_resources, | 
|  | }, { | 
|  | .name		= "axp20x-usb-power-supply", | 
|  | .of_compatible	= "x-powers,axp223-usb-power-supply", | 
|  | .num_resources	= ARRAY_SIZE(axp22x_usb_power_supply_resources), | 
|  | .resources	= axp22x_usb_power_supply_resources, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct mfd_cell axp152_cells[] = { | 
|  | { | 
|  | .name		= "axp20x-pek", | 
|  | .num_resources	= ARRAY_SIZE(axp152_pek_resources), | 
|  | .resources	= axp152_pek_resources, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct resource axp288_adc_resources[] = { | 
|  | DEFINE_RES_IRQ_NAMED(AXP288_IRQ_GPADC, "GPADC"), | 
|  | }; | 
|  |  | 
|  | static const struct resource axp288_extcon_resources[] = { | 
|  | DEFINE_RES_IRQ(AXP288_IRQ_VBUS_FALL), | 
|  | DEFINE_RES_IRQ(AXP288_IRQ_VBUS_RISE), | 
|  | DEFINE_RES_IRQ(AXP288_IRQ_MV_CHNG), | 
|  | DEFINE_RES_IRQ(AXP288_IRQ_BC_USB_CHNG), | 
|  | }; | 
|  |  | 
|  | static const struct resource axp288_charger_resources[] = { | 
|  | DEFINE_RES_IRQ(AXP288_IRQ_OV), | 
|  | DEFINE_RES_IRQ(AXP288_IRQ_DONE), | 
|  | DEFINE_RES_IRQ(AXP288_IRQ_CHARGING), | 
|  | DEFINE_RES_IRQ(AXP288_IRQ_SAFE_QUIT), | 
|  | DEFINE_RES_IRQ(AXP288_IRQ_SAFE_ENTER), | 
|  | DEFINE_RES_IRQ(AXP288_IRQ_QCBTU), | 
|  | DEFINE_RES_IRQ(AXP288_IRQ_CBTU), | 
|  | DEFINE_RES_IRQ(AXP288_IRQ_QCBTO), | 
|  | DEFINE_RES_IRQ(AXP288_IRQ_CBTO), | 
|  | }; | 
|  |  | 
|  | static const char * const axp288_fuel_gauge_suppliers[] = { "axp288_charger" }; | 
|  |  | 
|  | static const struct property_entry axp288_fuel_gauge_properties[] = { | 
|  | PROPERTY_ENTRY_STRING_ARRAY("supplied-from", axp288_fuel_gauge_suppliers), | 
|  | { } | 
|  | }; | 
|  |  | 
|  | static const struct software_node axp288_fuel_gauge_sw_node = { | 
|  | .name = "axp288_fuel_gauge", | 
|  | .properties = axp288_fuel_gauge_properties, | 
|  | }; | 
|  |  | 
|  | static const struct mfd_cell axp288_cells[] = { | 
|  | { | 
|  | .name		= "axp288_adc", | 
|  | .num_resources	= ARRAY_SIZE(axp288_adc_resources), | 
|  | .resources	= axp288_adc_resources, | 
|  | }, { | 
|  | .name		= "axp288_extcon", | 
|  | .num_resources	= ARRAY_SIZE(axp288_extcon_resources), | 
|  | .resources	= axp288_extcon_resources, | 
|  | }, { | 
|  | .name		= "axp288_charger", | 
|  | .num_resources	= ARRAY_SIZE(axp288_charger_resources), | 
|  | .resources	= axp288_charger_resources, | 
|  | }, { | 
|  | .name		= "axp288_fuel_gauge", | 
|  | .num_resources	= ARRAY_SIZE(axp288_fuel_gauge_resources), | 
|  | .resources	= axp288_fuel_gauge_resources, | 
|  | .swnode		= &axp288_fuel_gauge_sw_node, | 
|  | }, { | 
|  | .name		= "axp221-pek", | 
|  | .num_resources	= ARRAY_SIZE(axp288_power_button_resources), | 
|  | .resources	= axp288_power_button_resources, | 
|  | }, { | 
|  | .name		= "axp288_pmic_acpi", | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct mfd_cell axp803_cells[] = { | 
|  | { | 
|  | .name		= "axp221-pek", | 
|  | .num_resources	= ARRAY_SIZE(axp803_pek_resources), | 
|  | .resources	= axp803_pek_resources, | 
|  | }, { | 
|  | .name		= "axp20x-gpio", | 
|  | .of_compatible	= "x-powers,axp813-gpio", | 
|  | }, { | 
|  | .name		= "axp813-adc", | 
|  | .of_compatible	= "x-powers,axp813-adc", | 
|  | }, { | 
|  | .name		= "axp20x-battery-power-supply", | 
|  | .of_compatible	= "x-powers,axp813-battery-power-supply", | 
|  | }, { | 
|  | .name		= "axp20x-ac-power-supply", | 
|  | .of_compatible	= "x-powers,axp813-ac-power-supply", | 
|  | .num_resources	= ARRAY_SIZE(axp20x_ac_power_supply_resources), | 
|  | .resources	= axp20x_ac_power_supply_resources, | 
|  | }, { | 
|  | .name		= "axp20x-usb-power-supply", | 
|  | .num_resources	= ARRAY_SIZE(axp803_usb_power_supply_resources), | 
|  | .resources	= axp803_usb_power_supply_resources, | 
|  | .of_compatible	= "x-powers,axp813-usb-power-supply", | 
|  | }, | 
|  | {	.name		= "axp20x-regulator" }, | 
|  | }; | 
|  |  | 
|  | static const struct mfd_cell axp806_self_working_cells[] = { | 
|  | { | 
|  | .name		= "axp221-pek", | 
|  | .num_resources	= ARRAY_SIZE(axp806_pek_resources), | 
|  | .resources	= axp806_pek_resources, | 
|  | }, | 
|  | {	.name		= "axp20x-regulator" }, | 
|  | }; | 
|  |  | 
|  | static const struct mfd_cell axp806_cells[] = { | 
|  | { | 
|  | .id		= 2, | 
|  | .name		= "axp20x-regulator", | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct mfd_cell axp809_cells[] = { | 
|  | { | 
|  | .name		= "axp221-pek", | 
|  | .num_resources	= ARRAY_SIZE(axp809_pek_resources), | 
|  | .resources	= axp809_pek_resources, | 
|  | }, { | 
|  | .id		= 1, | 
|  | .name		= "axp20x-regulator", | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct mfd_cell axp813_cells[] = { | 
|  | { | 
|  | .name		= "axp221-pek", | 
|  | .num_resources	= ARRAY_SIZE(axp803_pek_resources), | 
|  | .resources	= axp803_pek_resources, | 
|  | }, { | 
|  | .name		= "axp20x-regulator", | 
|  | }, { | 
|  | .name		= "axp20x-gpio", | 
|  | .of_compatible	= "x-powers,axp813-gpio", | 
|  | }, { | 
|  | .name		= "axp813-adc", | 
|  | .of_compatible	= "x-powers,axp813-adc", | 
|  | }, { | 
|  | .name		= "axp20x-battery-power-supply", | 
|  | .of_compatible	= "x-powers,axp813-battery-power-supply", | 
|  | }, { | 
|  | .name		= "axp20x-ac-power-supply", | 
|  | .of_compatible	= "x-powers,axp813-ac-power-supply", | 
|  | .num_resources	= ARRAY_SIZE(axp20x_ac_power_supply_resources), | 
|  | .resources	= axp20x_ac_power_supply_resources, | 
|  | }, { | 
|  | .name		= "axp20x-usb-power-supply", | 
|  | .num_resources	= ARRAY_SIZE(axp803_usb_power_supply_resources), | 
|  | .resources	= axp803_usb_power_supply_resources, | 
|  | .of_compatible	= "x-powers,axp813-usb-power-supply", | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct axp20x_dev *axp20x_pm_power_off; | 
|  | static void axp20x_power_off(void) | 
|  | { | 
|  | if (axp20x_pm_power_off->variant == AXP288_ID) | 
|  | return; | 
|  |  | 
|  | regmap_write(axp20x_pm_power_off->regmap, AXP20X_OFF_CTRL, | 
|  | AXP20X_OFF); | 
|  |  | 
|  | /* Give capacitors etc. time to drain to avoid kernel panic msg. */ | 
|  | msleep(500); | 
|  | } | 
|  |  | 
|  | int axp20x_match_device(struct axp20x_dev *axp20x) | 
|  | { | 
|  | struct device *dev = axp20x->dev; | 
|  | const struct acpi_device_id *acpi_id; | 
|  | const struct of_device_id *of_id; | 
|  |  | 
|  | if (dev->of_node) { | 
|  | of_id = of_match_device(dev->driver->of_match_table, dev); | 
|  | if (!of_id) { | 
|  | dev_err(dev, "Unable to match OF ID\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  | axp20x->variant = (long)of_id->data; | 
|  | } else { | 
|  | acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev); | 
|  | if (!acpi_id || !acpi_id->driver_data) { | 
|  | dev_err(dev, "Unable to match ACPI ID and data\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  | axp20x->variant = (long)acpi_id->driver_data; | 
|  | } | 
|  |  | 
|  | switch (axp20x->variant) { | 
|  | case AXP152_ID: | 
|  | axp20x->nr_cells = ARRAY_SIZE(axp152_cells); | 
|  | axp20x->cells = axp152_cells; | 
|  | axp20x->regmap_cfg = &axp152_regmap_config; | 
|  | axp20x->regmap_irq_chip = &axp152_regmap_irq_chip; | 
|  | break; | 
|  | case AXP202_ID: | 
|  | case AXP209_ID: | 
|  | axp20x->nr_cells = ARRAY_SIZE(axp20x_cells); | 
|  | axp20x->cells = axp20x_cells; | 
|  | axp20x->regmap_cfg = &axp20x_regmap_config; | 
|  | axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip; | 
|  | break; | 
|  | case AXP221_ID: | 
|  | axp20x->nr_cells = ARRAY_SIZE(axp221_cells); | 
|  | axp20x->cells = axp221_cells; | 
|  | axp20x->regmap_cfg = &axp22x_regmap_config; | 
|  | axp20x->regmap_irq_chip = &axp22x_regmap_irq_chip; | 
|  | break; | 
|  | case AXP223_ID: | 
|  | axp20x->nr_cells = ARRAY_SIZE(axp223_cells); | 
|  | axp20x->cells = axp223_cells; | 
|  | axp20x->regmap_cfg = &axp22x_regmap_config; | 
|  | axp20x->regmap_irq_chip = &axp22x_regmap_irq_chip; | 
|  | break; | 
|  | case AXP288_ID: | 
|  | axp20x->cells = axp288_cells; | 
|  | axp20x->nr_cells = ARRAY_SIZE(axp288_cells); | 
|  | axp20x->regmap_cfg = &axp288_regmap_config; | 
|  | axp20x->regmap_irq_chip = &axp288_regmap_irq_chip; | 
|  | axp20x->irq_flags = IRQF_TRIGGER_LOW; | 
|  | break; | 
|  | case AXP803_ID: | 
|  | axp20x->nr_cells = ARRAY_SIZE(axp803_cells); | 
|  | axp20x->cells = axp803_cells; | 
|  | axp20x->regmap_cfg = &axp288_regmap_config; | 
|  | axp20x->regmap_irq_chip = &axp803_regmap_irq_chip; | 
|  | break; | 
|  | case AXP806_ID: | 
|  | /* | 
|  | * Don't register the power key part if in slave mode or | 
|  | * if there is no interrupt line. | 
|  | */ | 
|  | if (of_property_read_bool(axp20x->dev->of_node, | 
|  | "x-powers,self-working-mode") && | 
|  | axp20x->irq > 0) { | 
|  | axp20x->nr_cells = ARRAY_SIZE(axp806_self_working_cells); | 
|  | axp20x->cells = axp806_self_working_cells; | 
|  | } else { | 
|  | axp20x->nr_cells = ARRAY_SIZE(axp806_cells); | 
|  | axp20x->cells = axp806_cells; | 
|  | } | 
|  | axp20x->regmap_cfg = &axp806_regmap_config; | 
|  | axp20x->regmap_irq_chip = &axp806_regmap_irq_chip; | 
|  | break; | 
|  | case AXP809_ID: | 
|  | axp20x->nr_cells = ARRAY_SIZE(axp809_cells); | 
|  | axp20x->cells = axp809_cells; | 
|  | axp20x->regmap_cfg = &axp22x_regmap_config; | 
|  | axp20x->regmap_irq_chip = &axp809_regmap_irq_chip; | 
|  | break; | 
|  | case AXP813_ID: | 
|  | axp20x->nr_cells = ARRAY_SIZE(axp813_cells); | 
|  | axp20x->cells = axp813_cells; | 
|  | axp20x->regmap_cfg = &axp288_regmap_config; | 
|  | /* | 
|  | * The IRQ table given in the datasheet is incorrect. | 
|  | * In IRQ enable/status registers 1, there are separate | 
|  | * IRQs for ACIN and VBUS, instead of bits [7:5] being | 
|  | * the same as bits [4:2]. So it shares the same IRQs | 
|  | * as the AXP803, rather than the AXP288. | 
|  | */ | 
|  | axp20x->regmap_irq_chip = &axp803_regmap_irq_chip; | 
|  | break; | 
|  | default: | 
|  | dev_err(dev, "unsupported AXP20X ID %lu\n", axp20x->variant); | 
|  | return -EINVAL; | 
|  | } | 
|  | dev_info(dev, "AXP20x variant %s found\n", | 
|  | axp20x_model_names[axp20x->variant]); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(axp20x_match_device); | 
|  |  | 
|  | int axp20x_device_probe(struct axp20x_dev *axp20x) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | /* | 
|  | * The AXP806 supports either master/standalone or slave mode. | 
|  | * Slave mode allows sharing the serial bus, even with multiple | 
|  | * AXP806 which all have the same hardware address. | 
|  | * | 
|  | * This is done with extra "serial interface address extension", | 
|  | * or AXP806_BUS_ADDR_EXT, and "register address extension", or | 
|  | * AXP806_REG_ADDR_EXT, registers. The former is read-only, with | 
|  | * 1 bit customizable at the factory, and 1 bit depending on the | 
|  | * state of an external pin. The latter is writable. The device | 
|  | * will only respond to operations to its other registers when | 
|  | * the these device addressing bits (in the upper 4 bits of the | 
|  | * registers) match. | 
|  | * | 
|  | * By default we support an AXP806 chained to an AXP809 in slave | 
|  | * mode. Boards which use an AXP806 in master mode can set the | 
|  | * property "x-powers,master-mode" to override the default. | 
|  | */ | 
|  | if (axp20x->variant == AXP806_ID) { | 
|  | if (of_property_read_bool(axp20x->dev->of_node, | 
|  | "x-powers,master-mode") || | 
|  | of_property_read_bool(axp20x->dev->of_node, | 
|  | "x-powers,self-working-mode")) | 
|  | regmap_write(axp20x->regmap, AXP806_REG_ADDR_EXT, | 
|  | AXP806_REG_ADDR_EXT_ADDR_MASTER_MODE); | 
|  | else | 
|  | regmap_write(axp20x->regmap, AXP806_REG_ADDR_EXT, | 
|  | AXP806_REG_ADDR_EXT_ADDR_SLAVE_MODE); | 
|  | } | 
|  |  | 
|  | /* Only if there is an interrupt line connected towards the CPU. */ | 
|  | if (axp20x->irq > 0) { | 
|  | ret = regmap_add_irq_chip(axp20x->regmap, axp20x->irq, | 
|  | IRQF_ONESHOT | IRQF_SHARED | axp20x->irq_flags, | 
|  | -1, axp20x->regmap_irq_chip, | 
|  | &axp20x->regmap_irqc); | 
|  | if (ret) { | 
|  | dev_err(axp20x->dev, "failed to add irq chip: %d\n", | 
|  | ret); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | ret = mfd_add_devices(axp20x->dev, -1, axp20x->cells, | 
|  | axp20x->nr_cells, NULL, 0, NULL); | 
|  |  | 
|  | if (ret) { | 
|  | dev_err(axp20x->dev, "failed to add MFD devices: %d\n", ret); | 
|  | regmap_del_irq_chip(axp20x->irq, axp20x->regmap_irqc); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (!pm_power_off) { | 
|  | axp20x_pm_power_off = axp20x; | 
|  | pm_power_off = axp20x_power_off; | 
|  | } | 
|  |  | 
|  | dev_info(axp20x->dev, "AXP20X driver loaded\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(axp20x_device_probe); | 
|  |  | 
|  | void axp20x_device_remove(struct axp20x_dev *axp20x) | 
|  | { | 
|  | if (axp20x == axp20x_pm_power_off) { | 
|  | axp20x_pm_power_off = NULL; | 
|  | pm_power_off = NULL; | 
|  | } | 
|  |  | 
|  | mfd_remove_devices(axp20x->dev); | 
|  | regmap_del_irq_chip(axp20x->irq, axp20x->regmap_irqc); | 
|  | } | 
|  | EXPORT_SYMBOL(axp20x_device_remove); | 
|  |  | 
|  | MODULE_DESCRIPTION("PMIC MFD core driver for AXP20X"); | 
|  | MODULE_AUTHOR("Carlo Caione <carlo@caione.org>"); | 
|  | MODULE_LICENSE("GPL"); |