|  | // SPDX-License-Identifier: GPL-2.0-or-later | 
|  | /* | 
|  | * Device Modules for Nintendo Wii / Wii U HID Driver | 
|  | * Copyright (c) 2011-2013 David Herrmann <dh.herrmann@gmail.com> | 
|  | */ | 
|  |  | 
|  | /* | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * Wiimote Modules | 
|  | * Nintendo devices provide different peripherals and many new devices lack | 
|  | * initial features like the IR camera. Therefore, each peripheral device is | 
|  | * implemented as an independent module and we probe on each device only the | 
|  | * modules for the hardware that really is available. | 
|  | * | 
|  | * Module registration is sequential. Unregistration is done in reverse order. | 
|  | * After device detection, the needed modules are loaded. Users can trigger | 
|  | * re-detection which causes all modules to be unloaded and then reload the | 
|  | * modules for the new detected device. | 
|  | * | 
|  | * wdata->input is a shared input device. It is always initialized prior to | 
|  | * module registration. If at least one registered module is marked as | 
|  | * WIIMOD_FLAG_INPUT, then the input device will get registered after all | 
|  | * modules were registered. | 
|  | * Please note that it is unregistered _before_ the "remove" callbacks are | 
|  | * called. This guarantees that no input interaction is done, anymore. However, | 
|  | * the wiimote core keeps a reference to the input device so it is freed only | 
|  | * after all modules were removed. It is safe to send events to unregistered | 
|  | * input devices. | 
|  | */ | 
|  |  | 
|  | #include <linux/device.h> | 
|  | #include <linux/hid.h> | 
|  | #include <linux/input.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include "hid-wiimote.h" | 
|  |  | 
|  | /* | 
|  | * Keys | 
|  | * The initial Wii Remote provided a bunch of buttons that are reported as | 
|  | * part of the core protocol. Many later devices dropped these and report | 
|  | * invalid data in the core button reports. Load this only on devices which | 
|  | * correctly send button reports. | 
|  | * It uses the shared input device. | 
|  | */ | 
|  |  | 
|  | static const __u16 wiimod_keys_map[] = { | 
|  | KEY_LEFT,	/* WIIPROTO_KEY_LEFT */ | 
|  | KEY_RIGHT,	/* WIIPROTO_KEY_RIGHT */ | 
|  | KEY_UP,		/* WIIPROTO_KEY_UP */ | 
|  | KEY_DOWN,	/* WIIPROTO_KEY_DOWN */ | 
|  | KEY_NEXT,	/* WIIPROTO_KEY_PLUS */ | 
|  | KEY_PREVIOUS,	/* WIIPROTO_KEY_MINUS */ | 
|  | BTN_1,		/* WIIPROTO_KEY_ONE */ | 
|  | BTN_2,		/* WIIPROTO_KEY_TWO */ | 
|  | BTN_A,		/* WIIPROTO_KEY_A */ | 
|  | BTN_B,		/* WIIPROTO_KEY_B */ | 
|  | BTN_MODE,	/* WIIPROTO_KEY_HOME */ | 
|  | }; | 
|  |  | 
|  | static void wiimod_keys_in_keys(struct wiimote_data *wdata, const __u8 *keys) | 
|  | { | 
|  | input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_LEFT], | 
|  | !!(keys[0] & 0x01)); | 
|  | input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_RIGHT], | 
|  | !!(keys[0] & 0x02)); | 
|  | input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_DOWN], | 
|  | !!(keys[0] & 0x04)); | 
|  | input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_UP], | 
|  | !!(keys[0] & 0x08)); | 
|  | input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_PLUS], | 
|  | !!(keys[0] & 0x10)); | 
|  | input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_TWO], | 
|  | !!(keys[1] & 0x01)); | 
|  | input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_ONE], | 
|  | !!(keys[1] & 0x02)); | 
|  | input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_B], | 
|  | !!(keys[1] & 0x04)); | 
|  | input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_A], | 
|  | !!(keys[1] & 0x08)); | 
|  | input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_MINUS], | 
|  | !!(keys[1] & 0x10)); | 
|  | input_report_key(wdata->input, wiimod_keys_map[WIIPROTO_KEY_HOME], | 
|  | !!(keys[1] & 0x80)); | 
|  | input_sync(wdata->input); | 
|  | } | 
|  |  | 
|  | static int wiimod_keys_probe(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | unsigned int i; | 
|  |  | 
|  | set_bit(EV_KEY, wdata->input->evbit); | 
|  | for (i = 0; i < WIIPROTO_KEY_COUNT; ++i) | 
|  | set_bit(wiimod_keys_map[i], wdata->input->keybit); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct wiimod_ops wiimod_keys = { | 
|  | .flags = WIIMOD_FLAG_INPUT, | 
|  | .arg = 0, | 
|  | .probe = wiimod_keys_probe, | 
|  | .remove = NULL, | 
|  | .in_keys = wiimod_keys_in_keys, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Rumble | 
|  | * Nearly all devices provide a rumble feature. A small motor for | 
|  | * force-feedback effects. We provide an FF_RUMBLE memless ff device on the | 
|  | * shared input device if this module is loaded. | 
|  | * The rumble motor is controlled via a flag on almost every output report so | 
|  | * the wiimote core handles the rumble flag. But if a device doesn't provide | 
|  | * the rumble motor, this flag shouldn't be set. | 
|  | */ | 
|  |  | 
|  | /* used by wiimod_rumble and wiipro_rumble */ | 
|  | static void wiimod_rumble_worker(struct work_struct *work) | 
|  | { | 
|  | struct wiimote_data *wdata = container_of(work, struct wiimote_data, | 
|  | rumble_worker); | 
|  |  | 
|  | spin_lock_irq(&wdata->state.lock); | 
|  | wiiproto_req_rumble(wdata, wdata->state.cache_rumble); | 
|  | spin_unlock_irq(&wdata->state.lock); | 
|  | } | 
|  |  | 
|  | static int wiimod_rumble_play(struct input_dev *dev, void *data, | 
|  | struct ff_effect *eff) | 
|  | { | 
|  | struct wiimote_data *wdata = input_get_drvdata(dev); | 
|  | __u8 value; | 
|  |  | 
|  | /* | 
|  | * The wiimote supports only a single rumble motor so if any magnitude | 
|  | * is set to non-zero then we start the rumble motor. If both are set to | 
|  | * zero, we stop the rumble motor. | 
|  | */ | 
|  |  | 
|  | if (eff->u.rumble.strong_magnitude || eff->u.rumble.weak_magnitude) | 
|  | value = 1; | 
|  | else | 
|  | value = 0; | 
|  |  | 
|  | /* Locking state.lock here might deadlock with input_event() calls. | 
|  | * schedule_work acts as barrier. Merging multiple changes is fine. */ | 
|  | wdata->state.cache_rumble = value; | 
|  | schedule_work(&wdata->rumble_worker); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wiimod_rumble_probe(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | INIT_WORK(&wdata->rumble_worker, wiimod_rumble_worker); | 
|  |  | 
|  | set_bit(FF_RUMBLE, wdata->input->ffbit); | 
|  | if (input_ff_create_memless(wdata->input, NULL, wiimod_rumble_play)) | 
|  | return -ENOMEM; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void wiimod_rumble_remove(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | cancel_work_sync(&wdata->rumble_worker); | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wiiproto_req_rumble(wdata, 0); | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  | } | 
|  |  | 
|  | static const struct wiimod_ops wiimod_rumble = { | 
|  | .flags = WIIMOD_FLAG_INPUT, | 
|  | .arg = 0, | 
|  | .probe = wiimod_rumble_probe, | 
|  | .remove = wiimod_rumble_remove, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Battery | 
|  | * 1 byte of battery capacity information is sent along every protocol status | 
|  | * report. The wiimote core caches it but we try to update it on every | 
|  | * user-space request. | 
|  | * This is supported by nearly every device so it's almost always enabled. | 
|  | */ | 
|  |  | 
|  | static enum power_supply_property wiimod_battery_props[] = { | 
|  | POWER_SUPPLY_PROP_CAPACITY, | 
|  | POWER_SUPPLY_PROP_SCOPE, | 
|  | }; | 
|  |  | 
|  | static int wiimod_battery_get_property(struct power_supply *psy, | 
|  | enum power_supply_property psp, | 
|  | union power_supply_propval *val) | 
|  | { | 
|  | struct wiimote_data *wdata = power_supply_get_drvdata(psy); | 
|  | int ret = 0, state; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (psp == POWER_SUPPLY_PROP_SCOPE) { | 
|  | val->intval = POWER_SUPPLY_SCOPE_DEVICE; | 
|  | return 0; | 
|  | } else if (psp != POWER_SUPPLY_PROP_CAPACITY) { | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | ret = wiimote_cmd_acquire(wdata); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wiimote_cmd_set(wdata, WIIPROTO_REQ_SREQ, 0); | 
|  | wiiproto_req_status(wdata); | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  |  | 
|  | wiimote_cmd_wait(wdata); | 
|  | wiimote_cmd_release(wdata); | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | state = wdata->state.cmd_battery; | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  |  | 
|  | val->intval = state * 100 / 255; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int wiimod_battery_probe(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | struct power_supply_config psy_cfg = { .drv_data = wdata, }; | 
|  | int ret; | 
|  |  | 
|  | wdata->battery_desc.properties = wiimod_battery_props; | 
|  | wdata->battery_desc.num_properties = ARRAY_SIZE(wiimod_battery_props); | 
|  | wdata->battery_desc.get_property = wiimod_battery_get_property; | 
|  | wdata->battery_desc.type = POWER_SUPPLY_TYPE_BATTERY; | 
|  | wdata->battery_desc.use_for_apm = 0; | 
|  | wdata->battery_desc.name = kasprintf(GFP_KERNEL, "wiimote_battery_%s", | 
|  | wdata->hdev->uniq); | 
|  | if (!wdata->battery_desc.name) | 
|  | return -ENOMEM; | 
|  |  | 
|  | wdata->battery = power_supply_register(&wdata->hdev->dev, | 
|  | &wdata->battery_desc, | 
|  | &psy_cfg); | 
|  | if (IS_ERR(wdata->battery)) { | 
|  | hid_err(wdata->hdev, "cannot register battery device\n"); | 
|  | ret = PTR_ERR(wdata->battery); | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | power_supply_powers(wdata->battery, &wdata->hdev->dev); | 
|  | return 0; | 
|  |  | 
|  | err_free: | 
|  | kfree(wdata->battery_desc.name); | 
|  | wdata->battery_desc.name = NULL; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void wiimod_battery_remove(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | if (!wdata->battery_desc.name) | 
|  | return; | 
|  |  | 
|  | power_supply_unregister(wdata->battery); | 
|  | kfree(wdata->battery_desc.name); | 
|  | wdata->battery_desc.name = NULL; | 
|  | } | 
|  |  | 
|  | static const struct wiimod_ops wiimod_battery = { | 
|  | .flags = 0, | 
|  | .arg = 0, | 
|  | .probe = wiimod_battery_probe, | 
|  | .remove = wiimod_battery_remove, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * LED | 
|  | * 0 to 4 player LEDs are supported by devices. The "arg" field of the | 
|  | * wiimod_ops structure specifies which LED this module controls. This allows | 
|  | * to register a limited number of LEDs. | 
|  | * State is managed by wiimote core. | 
|  | */ | 
|  |  | 
|  | static enum led_brightness wiimod_led_get(struct led_classdev *led_dev) | 
|  | { | 
|  | struct device *dev = led_dev->dev->parent; | 
|  | struct wiimote_data *wdata = dev_to_wii(dev); | 
|  | int i; | 
|  | unsigned long flags; | 
|  | bool value = false; | 
|  |  | 
|  | for (i = 0; i < 4; ++i) { | 
|  | if (wdata->leds[i] == led_dev) { | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | value = wdata->state.flags & WIIPROTO_FLAG_LED(i + 1); | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return value ? LED_FULL : LED_OFF; | 
|  | } | 
|  |  | 
|  | static void wiimod_led_set(struct led_classdev *led_dev, | 
|  | enum led_brightness value) | 
|  | { | 
|  | struct device *dev = led_dev->dev->parent; | 
|  | struct wiimote_data *wdata = dev_to_wii(dev); | 
|  | int i; | 
|  | unsigned long flags; | 
|  | __u8 state, flag; | 
|  |  | 
|  | for (i = 0; i < 4; ++i) { | 
|  | if (wdata->leds[i] == led_dev) { | 
|  | flag = WIIPROTO_FLAG_LED(i + 1); | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | state = wdata->state.flags; | 
|  | if (value == LED_OFF) | 
|  | wiiproto_req_leds(wdata, state & ~flag); | 
|  | else | 
|  | wiiproto_req_leds(wdata, state | flag); | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static int wiimod_led_probe(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | struct device *dev = &wdata->hdev->dev; | 
|  | size_t namesz = strlen(dev_name(dev)) + 9; | 
|  | struct led_classdev *led; | 
|  | unsigned long flags; | 
|  | char *name; | 
|  | int ret; | 
|  |  | 
|  | led = kzalloc(sizeof(struct led_classdev) + namesz, GFP_KERNEL); | 
|  | if (!led) | 
|  | return -ENOMEM; | 
|  |  | 
|  | name = (void*)&led[1]; | 
|  | snprintf(name, namesz, "%s:blue:p%lu", dev_name(dev), ops->arg); | 
|  | led->name = name; | 
|  | led->brightness = 0; | 
|  | led->max_brightness = 1; | 
|  | led->brightness_get = wiimod_led_get; | 
|  | led->brightness_set = wiimod_led_set; | 
|  |  | 
|  | wdata->leds[ops->arg] = led; | 
|  | ret = led_classdev_register(dev, led); | 
|  | if (ret) | 
|  | goto err_free; | 
|  |  | 
|  | /* enable LED1 to stop initial LED-blinking */ | 
|  | if (ops->arg == 0) { | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wiiproto_req_leds(wdata, WIIPROTO_FLAG_LED1); | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_free: | 
|  | wdata->leds[ops->arg] = NULL; | 
|  | kfree(led); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void wiimod_led_remove(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | if (!wdata->leds[ops->arg]) | 
|  | return; | 
|  |  | 
|  | led_classdev_unregister(wdata->leds[ops->arg]); | 
|  | kfree(wdata->leds[ops->arg]); | 
|  | wdata->leds[ops->arg] = NULL; | 
|  | } | 
|  |  | 
|  | static const struct wiimod_ops wiimod_leds[4] = { | 
|  | { | 
|  | .flags = 0, | 
|  | .arg = 0, | 
|  | .probe = wiimod_led_probe, | 
|  | .remove = wiimod_led_remove, | 
|  | }, | 
|  | { | 
|  | .flags = 0, | 
|  | .arg = 1, | 
|  | .probe = wiimod_led_probe, | 
|  | .remove = wiimod_led_remove, | 
|  | }, | 
|  | { | 
|  | .flags = 0, | 
|  | .arg = 2, | 
|  | .probe = wiimod_led_probe, | 
|  | .remove = wiimod_led_remove, | 
|  | }, | 
|  | { | 
|  | .flags = 0, | 
|  | .arg = 3, | 
|  | .probe = wiimod_led_probe, | 
|  | .remove = wiimod_led_remove, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Accelerometer | 
|  | * 3 axis accelerometer data is part of nearly all DRMs. If not supported by a | 
|  | * device, it's mostly cleared to 0. This module parses this data and provides | 
|  | * it via a separate input device. | 
|  | */ | 
|  |  | 
|  | static void wiimod_accel_in_accel(struct wiimote_data *wdata, | 
|  | const __u8 *accel) | 
|  | { | 
|  | __u16 x, y, z; | 
|  |  | 
|  | if (!(wdata->state.flags & WIIPROTO_FLAG_ACCEL)) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * payload is: BB BB XX YY ZZ | 
|  | * Accelerometer data is encoded into 3 10bit values. XX, YY and ZZ | 
|  | * contain the upper 8 bits of each value. The lower 2 bits are | 
|  | * contained in the buttons data BB BB. | 
|  | * Bits 6 and 7 of the first buttons byte BB is the lower 2 bits of the | 
|  | * X accel value. Bit 5 of the second buttons byte is the 2nd bit of Y | 
|  | * accel value and bit 6 is the second bit of the Z value. | 
|  | * The first bit of Y and Z values is not available and always set to 0. | 
|  | * 0x200 is returned on no movement. | 
|  | */ | 
|  |  | 
|  | x = accel[2] << 2; | 
|  | y = accel[3] << 2; | 
|  | z = accel[4] << 2; | 
|  |  | 
|  | x |= (accel[0] >> 5) & 0x3; | 
|  | y |= (accel[1] >> 4) & 0x2; | 
|  | z |= (accel[1] >> 5) & 0x2; | 
|  |  | 
|  | input_report_abs(wdata->accel, ABS_RX, x - 0x200); | 
|  | input_report_abs(wdata->accel, ABS_RY, y - 0x200); | 
|  | input_report_abs(wdata->accel, ABS_RZ, z - 0x200); | 
|  | input_sync(wdata->accel); | 
|  | } | 
|  |  | 
|  | static int wiimod_accel_open(struct input_dev *dev) | 
|  | { | 
|  | struct wiimote_data *wdata = input_get_drvdata(dev); | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wiiproto_req_accel(wdata, true); | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void wiimod_accel_close(struct input_dev *dev) | 
|  | { | 
|  | struct wiimote_data *wdata = input_get_drvdata(dev); | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wiiproto_req_accel(wdata, false); | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  | } | 
|  |  | 
|  | static int wiimod_accel_probe(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | wdata->accel = input_allocate_device(); | 
|  | if (!wdata->accel) | 
|  | return -ENOMEM; | 
|  |  | 
|  | input_set_drvdata(wdata->accel, wdata); | 
|  | wdata->accel->open = wiimod_accel_open; | 
|  | wdata->accel->close = wiimod_accel_close; | 
|  | wdata->accel->dev.parent = &wdata->hdev->dev; | 
|  | wdata->accel->id.bustype = wdata->hdev->bus; | 
|  | wdata->accel->id.vendor = wdata->hdev->vendor; | 
|  | wdata->accel->id.product = wdata->hdev->product; | 
|  | wdata->accel->id.version = wdata->hdev->version; | 
|  | wdata->accel->name = WIIMOTE_NAME " Accelerometer"; | 
|  |  | 
|  | set_bit(EV_ABS, wdata->accel->evbit); | 
|  | set_bit(ABS_RX, wdata->accel->absbit); | 
|  | set_bit(ABS_RY, wdata->accel->absbit); | 
|  | set_bit(ABS_RZ, wdata->accel->absbit); | 
|  | input_set_abs_params(wdata->accel, ABS_RX, -500, 500, 2, 4); | 
|  | input_set_abs_params(wdata->accel, ABS_RY, -500, 500, 2, 4); | 
|  | input_set_abs_params(wdata->accel, ABS_RZ, -500, 500, 2, 4); | 
|  |  | 
|  | ret = input_register_device(wdata->accel); | 
|  | if (ret) { | 
|  | hid_err(wdata->hdev, "cannot register input device\n"); | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_free: | 
|  | input_free_device(wdata->accel); | 
|  | wdata->accel = NULL; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void wiimod_accel_remove(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | if (!wdata->accel) | 
|  | return; | 
|  |  | 
|  | input_unregister_device(wdata->accel); | 
|  | wdata->accel = NULL; | 
|  | } | 
|  |  | 
|  | static const struct wiimod_ops wiimod_accel = { | 
|  | .flags = 0, | 
|  | .arg = 0, | 
|  | .probe = wiimod_accel_probe, | 
|  | .remove = wiimod_accel_remove, | 
|  | .in_accel = wiimod_accel_in_accel, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * IR Cam | 
|  | * Up to 4 IR sources can be tracked by a normal Wii Remote. The IR cam needs | 
|  | * to be initialized with a fairly complex procedure and consumes a lot of | 
|  | * power. Therefore, as long as no application uses the IR input device, it is | 
|  | * kept offline. | 
|  | * Nearly no other device than the normal Wii Remotes supports the IR cam so | 
|  | * you can disable this module for these devices. | 
|  | */ | 
|  |  | 
|  | static void wiimod_ir_in_ir(struct wiimote_data *wdata, const __u8 *ir, | 
|  | bool packed, unsigned int id) | 
|  | { | 
|  | __u16 x, y; | 
|  | __u8 xid, yid; | 
|  | bool sync = false; | 
|  |  | 
|  | if (!(wdata->state.flags & WIIPROTO_FLAGS_IR)) | 
|  | return; | 
|  |  | 
|  | switch (id) { | 
|  | case 0: | 
|  | xid = ABS_HAT0X; | 
|  | yid = ABS_HAT0Y; | 
|  | break; | 
|  | case 1: | 
|  | xid = ABS_HAT1X; | 
|  | yid = ABS_HAT1Y; | 
|  | break; | 
|  | case 2: | 
|  | xid = ABS_HAT2X; | 
|  | yid = ABS_HAT2Y; | 
|  | break; | 
|  | case 3: | 
|  | xid = ABS_HAT3X; | 
|  | yid = ABS_HAT3Y; | 
|  | sync = true; | 
|  | break; | 
|  | default: | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Basic IR data is encoded into 3 bytes. The first two bytes are the | 
|  | * lower 8 bit of the X/Y data, the 3rd byte contains the upper 2 bits | 
|  | * of both. | 
|  | * If data is packed, then the 3rd byte is put first and slightly | 
|  | * reordered. This allows to interleave packed and non-packed data to | 
|  | * have two IR sets in 5 bytes instead of 6. | 
|  | * The resulting 10bit X/Y values are passed to the ABS_HAT? input dev. | 
|  | */ | 
|  |  | 
|  | if (packed) { | 
|  | x = ir[1] | ((ir[0] & 0x03) << 8); | 
|  | y = ir[2] | ((ir[0] & 0x0c) << 6); | 
|  | } else { | 
|  | x = ir[0] | ((ir[2] & 0x30) << 4); | 
|  | y = ir[1] | ((ir[2] & 0xc0) << 2); | 
|  | } | 
|  |  | 
|  | input_report_abs(wdata->ir, xid, x); | 
|  | input_report_abs(wdata->ir, yid, y); | 
|  |  | 
|  | if (sync) | 
|  | input_sync(wdata->ir); | 
|  | } | 
|  |  | 
|  | static int wiimod_ir_change(struct wiimote_data *wdata, __u16 mode) | 
|  | { | 
|  | int ret; | 
|  | unsigned long flags; | 
|  | __u8 format = 0; | 
|  | static const __u8 data_enable[] = { 0x01 }; | 
|  | static const __u8 data_sens1[] = { 0x02, 0x00, 0x00, 0x71, 0x01, | 
|  | 0x00, 0xaa, 0x00, 0x64 }; | 
|  | static const __u8 data_sens2[] = { 0x63, 0x03 }; | 
|  | static const __u8 data_fin[] = { 0x08 }; | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  |  | 
|  | if (mode == (wdata->state.flags & WIIPROTO_FLAGS_IR)) { | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (mode == 0) { | 
|  | wdata->state.flags &= ~WIIPROTO_FLAGS_IR; | 
|  | wiiproto_req_ir1(wdata, 0); | 
|  | wiiproto_req_ir2(wdata, 0); | 
|  | wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL); | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  |  | 
|  | ret = wiimote_cmd_acquire(wdata); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* send PIXEL CLOCK ENABLE cmd first */ | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wiimote_cmd_set(wdata, WIIPROTO_REQ_IR1, 0); | 
|  | wiiproto_req_ir1(wdata, 0x06); | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  |  | 
|  | ret = wiimote_cmd_wait(wdata); | 
|  | if (ret) | 
|  | goto unlock; | 
|  | if (wdata->state.cmd_err) { | 
|  | ret = -EIO; | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | /* enable IR LOGIC */ | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wiimote_cmd_set(wdata, WIIPROTO_REQ_IR2, 0); | 
|  | wiiproto_req_ir2(wdata, 0x06); | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  |  | 
|  | ret = wiimote_cmd_wait(wdata); | 
|  | if (ret) | 
|  | goto unlock; | 
|  | if (wdata->state.cmd_err) { | 
|  | ret = -EIO; | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | /* enable IR cam but do not make it send data, yet */ | 
|  | ret = wiimote_cmd_write(wdata, 0xb00030, data_enable, | 
|  | sizeof(data_enable)); | 
|  | if (ret) | 
|  | goto unlock; | 
|  |  | 
|  | /* write first sensitivity block */ | 
|  | ret = wiimote_cmd_write(wdata, 0xb00000, data_sens1, | 
|  | sizeof(data_sens1)); | 
|  | if (ret) | 
|  | goto unlock; | 
|  |  | 
|  | /* write second sensitivity block */ | 
|  | ret = wiimote_cmd_write(wdata, 0xb0001a, data_sens2, | 
|  | sizeof(data_sens2)); | 
|  | if (ret) | 
|  | goto unlock; | 
|  |  | 
|  | /* put IR cam into desired state */ | 
|  | switch (mode) { | 
|  | case WIIPROTO_FLAG_IR_FULL: | 
|  | format = 5; | 
|  | break; | 
|  | case WIIPROTO_FLAG_IR_EXT: | 
|  | format = 3; | 
|  | break; | 
|  | case WIIPROTO_FLAG_IR_BASIC: | 
|  | format = 1; | 
|  | break; | 
|  | } | 
|  | ret = wiimote_cmd_write(wdata, 0xb00033, &format, sizeof(format)); | 
|  | if (ret) | 
|  | goto unlock; | 
|  |  | 
|  | /* make IR cam send data */ | 
|  | ret = wiimote_cmd_write(wdata, 0xb00030, data_fin, sizeof(data_fin)); | 
|  | if (ret) | 
|  | goto unlock; | 
|  |  | 
|  | /* request new DRM mode compatible to IR mode */ | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wdata->state.flags &= ~WIIPROTO_FLAGS_IR; | 
|  | wdata->state.flags |= mode & WIIPROTO_FLAGS_IR; | 
|  | wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL); | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  |  | 
|  | unlock: | 
|  | wiimote_cmd_release(wdata); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int wiimod_ir_open(struct input_dev *dev) | 
|  | { | 
|  | struct wiimote_data *wdata = input_get_drvdata(dev); | 
|  |  | 
|  | return wiimod_ir_change(wdata, WIIPROTO_FLAG_IR_BASIC); | 
|  | } | 
|  |  | 
|  | static void wiimod_ir_close(struct input_dev *dev) | 
|  | { | 
|  | struct wiimote_data *wdata = input_get_drvdata(dev); | 
|  |  | 
|  | wiimod_ir_change(wdata, 0); | 
|  | } | 
|  |  | 
|  | static int wiimod_ir_probe(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | wdata->ir = input_allocate_device(); | 
|  | if (!wdata->ir) | 
|  | return -ENOMEM; | 
|  |  | 
|  | input_set_drvdata(wdata->ir, wdata); | 
|  | wdata->ir->open = wiimod_ir_open; | 
|  | wdata->ir->close = wiimod_ir_close; | 
|  | wdata->ir->dev.parent = &wdata->hdev->dev; | 
|  | wdata->ir->id.bustype = wdata->hdev->bus; | 
|  | wdata->ir->id.vendor = wdata->hdev->vendor; | 
|  | wdata->ir->id.product = wdata->hdev->product; | 
|  | wdata->ir->id.version = wdata->hdev->version; | 
|  | wdata->ir->name = WIIMOTE_NAME " IR"; | 
|  |  | 
|  | set_bit(EV_ABS, wdata->ir->evbit); | 
|  | set_bit(ABS_HAT0X, wdata->ir->absbit); | 
|  | set_bit(ABS_HAT0Y, wdata->ir->absbit); | 
|  | set_bit(ABS_HAT1X, wdata->ir->absbit); | 
|  | set_bit(ABS_HAT1Y, wdata->ir->absbit); | 
|  | set_bit(ABS_HAT2X, wdata->ir->absbit); | 
|  | set_bit(ABS_HAT2Y, wdata->ir->absbit); | 
|  | set_bit(ABS_HAT3X, wdata->ir->absbit); | 
|  | set_bit(ABS_HAT3Y, wdata->ir->absbit); | 
|  | input_set_abs_params(wdata->ir, ABS_HAT0X, 0, 1023, 2, 4); | 
|  | input_set_abs_params(wdata->ir, ABS_HAT0Y, 0, 767, 2, 4); | 
|  | input_set_abs_params(wdata->ir, ABS_HAT1X, 0, 1023, 2, 4); | 
|  | input_set_abs_params(wdata->ir, ABS_HAT1Y, 0, 767, 2, 4); | 
|  | input_set_abs_params(wdata->ir, ABS_HAT2X, 0, 1023, 2, 4); | 
|  | input_set_abs_params(wdata->ir, ABS_HAT2Y, 0, 767, 2, 4); | 
|  | input_set_abs_params(wdata->ir, ABS_HAT3X, 0, 1023, 2, 4); | 
|  | input_set_abs_params(wdata->ir, ABS_HAT3Y, 0, 767, 2, 4); | 
|  |  | 
|  | ret = input_register_device(wdata->ir); | 
|  | if (ret) { | 
|  | hid_err(wdata->hdev, "cannot register input device\n"); | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_free: | 
|  | input_free_device(wdata->ir); | 
|  | wdata->ir = NULL; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void wiimod_ir_remove(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | if (!wdata->ir) | 
|  | return; | 
|  |  | 
|  | input_unregister_device(wdata->ir); | 
|  | wdata->ir = NULL; | 
|  | } | 
|  |  | 
|  | static const struct wiimod_ops wiimod_ir = { | 
|  | .flags = 0, | 
|  | .arg = 0, | 
|  | .probe = wiimod_ir_probe, | 
|  | .remove = wiimod_ir_remove, | 
|  | .in_ir = wiimod_ir_in_ir, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Nunchuk Extension | 
|  | * The Nintendo Wii Nunchuk was the first official extension published by | 
|  | * Nintendo. It provides two additional keys and a separate accelerometer. It | 
|  | * can be hotplugged to standard Wii Remotes. | 
|  | */ | 
|  |  | 
|  | enum wiimod_nunchuk_keys { | 
|  | WIIMOD_NUNCHUK_KEY_C, | 
|  | WIIMOD_NUNCHUK_KEY_Z, | 
|  | WIIMOD_NUNCHUK_KEY_NUM, | 
|  | }; | 
|  |  | 
|  | static const __u16 wiimod_nunchuk_map[] = { | 
|  | BTN_C,		/* WIIMOD_NUNCHUK_KEY_C */ | 
|  | BTN_Z,		/* WIIMOD_NUNCHUK_KEY_Z */ | 
|  | }; | 
|  |  | 
|  | static void wiimod_nunchuk_in_ext(struct wiimote_data *wdata, const __u8 *ext) | 
|  | { | 
|  | __s16 x, y, z, bx, by; | 
|  |  | 
|  | /*   Byte |   8    7 |  6    5 |  4    3 |  2 |  1  | | 
|  | *   -----+----------+---------+---------+----+-----+ | 
|  | *    1   |              Button X <7:0>             | | 
|  | *    2   |              Button Y <7:0>             | | 
|  | *   -----+----------+---------+---------+----+-----+ | 
|  | *    3   |               Speed X <9:2>             | | 
|  | *    4   |               Speed Y <9:2>             | | 
|  | *    5   |               Speed Z <9:2>             | | 
|  | *   -----+----------+---------+---------+----+-----+ | 
|  | *    6   | Z <1:0>  | Y <1:0> | X <1:0> | BC | BZ  | | 
|  | *   -----+----------+---------+---------+----+-----+ | 
|  | * Button X/Y is the analog stick. Speed X, Y and Z are the | 
|  | * accelerometer data in the same format as the wiimote's accelerometer. | 
|  | * The 6th byte contains the LSBs of the accelerometer data. | 
|  | * BC and BZ are the C and Z buttons: 0 means pressed | 
|  | * | 
|  | * If reported interleaved with motionp, then the layout changes. The | 
|  | * 5th and 6th byte changes to: | 
|  | *   -----+-----------------------------------+-----+ | 
|  | *    5   |            Speed Z <9:3>          | EXT | | 
|  | *   -----+--------+-----+-----+----+----+----+-----+ | 
|  | *    6   |Z <2:1> |Y <1>|X <1>| BC | BZ | 0  |  0  | | 
|  | *   -----+--------+-----+-----+----+----+----+-----+ | 
|  | * All three accelerometer values lose their LSB. The other data is | 
|  | * still available but slightly moved. | 
|  | * | 
|  | * Center data for button values is 128. Center value for accelerometer | 
|  | * values it 512 / 0x200 | 
|  | */ | 
|  |  | 
|  | bx = ext[0]; | 
|  | by = ext[1]; | 
|  | bx -= 128; | 
|  | by -= 128; | 
|  |  | 
|  | x = ext[2] << 2; | 
|  | y = ext[3] << 2; | 
|  | z = ext[4] << 2; | 
|  |  | 
|  | if (wdata->state.flags & WIIPROTO_FLAG_MP_ACTIVE) { | 
|  | x |= (ext[5] >> 3) & 0x02; | 
|  | y |= (ext[5] >> 4) & 0x02; | 
|  | z &= ~0x4; | 
|  | z |= (ext[5] >> 5) & 0x06; | 
|  | } else { | 
|  | x |= (ext[5] >> 2) & 0x03; | 
|  | y |= (ext[5] >> 4) & 0x03; | 
|  | z |= (ext[5] >> 6) & 0x03; | 
|  | } | 
|  |  | 
|  | x -= 0x200; | 
|  | y -= 0x200; | 
|  | z -= 0x200; | 
|  |  | 
|  | input_report_abs(wdata->extension.input, ABS_HAT0X, bx); | 
|  | input_report_abs(wdata->extension.input, ABS_HAT0Y, by); | 
|  |  | 
|  | input_report_abs(wdata->extension.input, ABS_RX, x); | 
|  | input_report_abs(wdata->extension.input, ABS_RY, y); | 
|  | input_report_abs(wdata->extension.input, ABS_RZ, z); | 
|  |  | 
|  | if (wdata->state.flags & WIIPROTO_FLAG_MP_ACTIVE) { | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_nunchuk_map[WIIMOD_NUNCHUK_KEY_Z], | 
|  | !(ext[5] & 0x04)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_nunchuk_map[WIIMOD_NUNCHUK_KEY_C], | 
|  | !(ext[5] & 0x08)); | 
|  | } else { | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_nunchuk_map[WIIMOD_NUNCHUK_KEY_Z], | 
|  | !(ext[5] & 0x01)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_nunchuk_map[WIIMOD_NUNCHUK_KEY_C], | 
|  | !(ext[5] & 0x02)); | 
|  | } | 
|  |  | 
|  | input_sync(wdata->extension.input); | 
|  | } | 
|  |  | 
|  | static int wiimod_nunchuk_open(struct input_dev *dev) | 
|  | { | 
|  | struct wiimote_data *wdata = input_get_drvdata(dev); | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wdata->state.flags |= WIIPROTO_FLAG_EXT_USED; | 
|  | wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL); | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void wiimod_nunchuk_close(struct input_dev *dev) | 
|  | { | 
|  | struct wiimote_data *wdata = input_get_drvdata(dev); | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wdata->state.flags &= ~WIIPROTO_FLAG_EXT_USED; | 
|  | wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL); | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  | } | 
|  |  | 
|  | static int wiimod_nunchuk_probe(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | int ret, i; | 
|  |  | 
|  | wdata->extension.input = input_allocate_device(); | 
|  | if (!wdata->extension.input) | 
|  | return -ENOMEM; | 
|  |  | 
|  | input_set_drvdata(wdata->extension.input, wdata); | 
|  | wdata->extension.input->open = wiimod_nunchuk_open; | 
|  | wdata->extension.input->close = wiimod_nunchuk_close; | 
|  | wdata->extension.input->dev.parent = &wdata->hdev->dev; | 
|  | wdata->extension.input->id.bustype = wdata->hdev->bus; | 
|  | wdata->extension.input->id.vendor = wdata->hdev->vendor; | 
|  | wdata->extension.input->id.product = wdata->hdev->product; | 
|  | wdata->extension.input->id.version = wdata->hdev->version; | 
|  | wdata->extension.input->name = WIIMOTE_NAME " Nunchuk"; | 
|  |  | 
|  | set_bit(EV_KEY, wdata->extension.input->evbit); | 
|  | for (i = 0; i < WIIMOD_NUNCHUK_KEY_NUM; ++i) | 
|  | set_bit(wiimod_nunchuk_map[i], | 
|  | wdata->extension.input->keybit); | 
|  |  | 
|  | set_bit(EV_ABS, wdata->extension.input->evbit); | 
|  | set_bit(ABS_HAT0X, wdata->extension.input->absbit); | 
|  | set_bit(ABS_HAT0Y, wdata->extension.input->absbit); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_HAT0X, -120, 120, 2, 4); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_HAT0Y, -120, 120, 2, 4); | 
|  | set_bit(ABS_RX, wdata->extension.input->absbit); | 
|  | set_bit(ABS_RY, wdata->extension.input->absbit); | 
|  | set_bit(ABS_RZ, wdata->extension.input->absbit); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_RX, -500, 500, 2, 4); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_RY, -500, 500, 2, 4); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_RZ, -500, 500, 2, 4); | 
|  |  | 
|  | ret = input_register_device(wdata->extension.input); | 
|  | if (ret) | 
|  | goto err_free; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_free: | 
|  | input_free_device(wdata->extension.input); | 
|  | wdata->extension.input = NULL; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void wiimod_nunchuk_remove(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | if (!wdata->extension.input) | 
|  | return; | 
|  |  | 
|  | input_unregister_device(wdata->extension.input); | 
|  | wdata->extension.input = NULL; | 
|  | } | 
|  |  | 
|  | static const struct wiimod_ops wiimod_nunchuk = { | 
|  | .flags = 0, | 
|  | .arg = 0, | 
|  | .probe = wiimod_nunchuk_probe, | 
|  | .remove = wiimod_nunchuk_remove, | 
|  | .in_ext = wiimod_nunchuk_in_ext, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Classic Controller | 
|  | * Another official extension from Nintendo. It provides a classic | 
|  | * gamecube-like controller that can be hotplugged on the Wii Remote. | 
|  | * It has several hardware buttons and switches that are all reported via | 
|  | * a normal extension device. | 
|  | */ | 
|  |  | 
|  | enum wiimod_classic_keys { | 
|  | WIIMOD_CLASSIC_KEY_A, | 
|  | WIIMOD_CLASSIC_KEY_B, | 
|  | WIIMOD_CLASSIC_KEY_X, | 
|  | WIIMOD_CLASSIC_KEY_Y, | 
|  | WIIMOD_CLASSIC_KEY_ZL, | 
|  | WIIMOD_CLASSIC_KEY_ZR, | 
|  | WIIMOD_CLASSIC_KEY_PLUS, | 
|  | WIIMOD_CLASSIC_KEY_MINUS, | 
|  | WIIMOD_CLASSIC_KEY_HOME, | 
|  | WIIMOD_CLASSIC_KEY_LEFT, | 
|  | WIIMOD_CLASSIC_KEY_RIGHT, | 
|  | WIIMOD_CLASSIC_KEY_UP, | 
|  | WIIMOD_CLASSIC_KEY_DOWN, | 
|  | WIIMOD_CLASSIC_KEY_LT, | 
|  | WIIMOD_CLASSIC_KEY_RT, | 
|  | WIIMOD_CLASSIC_KEY_NUM, | 
|  | }; | 
|  |  | 
|  | static const __u16 wiimod_classic_map[] = { | 
|  | BTN_A,		/* WIIMOD_CLASSIC_KEY_A */ | 
|  | BTN_B,		/* WIIMOD_CLASSIC_KEY_B */ | 
|  | BTN_X,		/* WIIMOD_CLASSIC_KEY_X */ | 
|  | BTN_Y,		/* WIIMOD_CLASSIC_KEY_Y */ | 
|  | BTN_TL2,	/* WIIMOD_CLASSIC_KEY_ZL */ | 
|  | BTN_TR2,	/* WIIMOD_CLASSIC_KEY_ZR */ | 
|  | KEY_NEXT,	/* WIIMOD_CLASSIC_KEY_PLUS */ | 
|  | KEY_PREVIOUS,	/* WIIMOD_CLASSIC_KEY_MINUS */ | 
|  | BTN_MODE,	/* WIIMOD_CLASSIC_KEY_HOME */ | 
|  | KEY_LEFT,	/* WIIMOD_CLASSIC_KEY_LEFT */ | 
|  | KEY_RIGHT,	/* WIIMOD_CLASSIC_KEY_RIGHT */ | 
|  | KEY_UP,		/* WIIMOD_CLASSIC_KEY_UP */ | 
|  | KEY_DOWN,	/* WIIMOD_CLASSIC_KEY_DOWN */ | 
|  | BTN_TL,		/* WIIMOD_CLASSIC_KEY_LT */ | 
|  | BTN_TR,		/* WIIMOD_CLASSIC_KEY_RT */ | 
|  | }; | 
|  |  | 
|  | static void wiimod_classic_in_ext(struct wiimote_data *wdata, const __u8 *ext) | 
|  | { | 
|  | __s8 rx, ry, lx, ly, lt, rt; | 
|  |  | 
|  | /*   Byte |  8  |  7  |  6  |  5  |  4  |  3  |  2  |  1  | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    1   | RX <5:4>  |              LX <5:0>             | | 
|  | *    2   | RX <3:2>  |              LY <5:0>             | | 
|  | *   -----+-----+-----+-----+-----------------------------+ | 
|  | *    3   |RX<1>| LT <5:4>  |         RY <5:1>            | | 
|  | *   -----+-----+-----------+-----------------------------+ | 
|  | *    4   |     LT <3:1>    |         RT <5:1>            | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    5   | BDR | BDD | BLT | B-  | BH  | B+  | BRT |  1  | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    6   | BZL | BB  | BY  | BA  | BX  | BZR | BDL | BDU | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | * All buttons are 0 if pressed | 
|  | * RX and RY are right analog stick | 
|  | * LX and LY are left analog stick | 
|  | * LT is left trigger, RT is right trigger | 
|  | * BLT is 0 if left trigger is fully pressed | 
|  | * BRT is 0 if right trigger is fully pressed | 
|  | * BDR, BDD, BDL, BDU form the D-Pad with right, down, left, up buttons | 
|  | * BZL is left Z button and BZR is right Z button | 
|  | * B-, BH, B+ are +, HOME and - buttons | 
|  | * BB, BY, BA, BX are A, B, X, Y buttons | 
|  | * LSB of RX, RY, LT, and RT are not transmitted and always 0. | 
|  | * | 
|  | * With motionp enabled it changes slightly to this: | 
|  | *   Byte |  8  |  7  |  6  |  5  |  4  |  3  |  2  |  1  | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    1   | RX <5:4>  |          LX <5:1>           | BDU | | 
|  | *    2   | RX <3:2>  |          LY <5:1>           | BDL | | 
|  | *   -----+-----+-----+-----+-----------------------+-----+ | 
|  | *    3   |RX<1>| LT <5:4>  |         RY <5:1>            | | 
|  | *   -----+-----+-----------+-----------------------------+ | 
|  | *    4   |     LT <3:1>    |         RT <5:1>            | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    5   | BDR | BDD | BLT | B-  | BH  | B+  | BRT | EXT | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    6   | BZL | BB  | BY  | BA  | BX  | BZR |  0  |  0  | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | * Only the LSBs of LX and LY are lost. BDU and BDL are moved, the rest | 
|  | * is the same as before. | 
|  | */ | 
|  |  | 
|  | static const s8 digital_to_analog[3] = {0x20, 0, -0x20}; | 
|  |  | 
|  | if (wdata->state.flags & WIIPROTO_FLAG_MP_ACTIVE) { | 
|  | if (wiimote_dpad_as_analog) { | 
|  | lx = digital_to_analog[1 - !(ext[4] & 0x80) | 
|  | + !(ext[1] & 0x01)]; | 
|  | ly = digital_to_analog[1 - !(ext[4] & 0x40) | 
|  | + !(ext[0] & 0x01)]; | 
|  | } else { | 
|  | lx = (ext[0] & 0x3e) - 0x20; | 
|  | ly = (ext[1] & 0x3e) - 0x20; | 
|  | } | 
|  | } else { | 
|  | if (wiimote_dpad_as_analog) { | 
|  | lx = digital_to_analog[1 - !(ext[4] & 0x80) | 
|  | + !(ext[5] & 0x02)]; | 
|  | ly = digital_to_analog[1 - !(ext[4] & 0x40) | 
|  | + !(ext[5] & 0x01)]; | 
|  | } else { | 
|  | lx = (ext[0] & 0x3f) - 0x20; | 
|  | ly = (ext[1] & 0x3f) - 0x20; | 
|  | } | 
|  | } | 
|  |  | 
|  | rx = (ext[0] >> 3) & 0x18; | 
|  | rx |= (ext[1] >> 5) & 0x06; | 
|  | rx |= (ext[2] >> 7) & 0x01; | 
|  | ry = ext[2] & 0x1f; | 
|  |  | 
|  | rt = ext[3] & 0x1f; | 
|  | lt = (ext[2] >> 2) & 0x18; | 
|  | lt |= (ext[3] >> 5) & 0x07; | 
|  |  | 
|  | rx <<= 1; | 
|  | ry <<= 1; | 
|  | rt <<= 1; | 
|  | lt <<= 1; | 
|  |  | 
|  | input_report_abs(wdata->extension.input, ABS_HAT1X, lx); | 
|  | input_report_abs(wdata->extension.input, ABS_HAT1Y, ly); | 
|  | input_report_abs(wdata->extension.input, ABS_HAT2X, rx - 0x20); | 
|  | input_report_abs(wdata->extension.input, ABS_HAT2Y, ry - 0x20); | 
|  | input_report_abs(wdata->extension.input, ABS_HAT3X, rt); | 
|  | input_report_abs(wdata->extension.input, ABS_HAT3Y, lt); | 
|  |  | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_classic_map[WIIMOD_CLASSIC_KEY_LT], | 
|  | !(ext[4] & 0x20)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_classic_map[WIIMOD_CLASSIC_KEY_MINUS], | 
|  | !(ext[4] & 0x10)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_classic_map[WIIMOD_CLASSIC_KEY_HOME], | 
|  | !(ext[4] & 0x08)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_classic_map[WIIMOD_CLASSIC_KEY_PLUS], | 
|  | !(ext[4] & 0x04)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_classic_map[WIIMOD_CLASSIC_KEY_RT], | 
|  | !(ext[4] & 0x02)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_classic_map[WIIMOD_CLASSIC_KEY_ZL], | 
|  | !(ext[5] & 0x80)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_classic_map[WIIMOD_CLASSIC_KEY_B], | 
|  | !(ext[5] & 0x40)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_classic_map[WIIMOD_CLASSIC_KEY_Y], | 
|  | !(ext[5] & 0x20)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_classic_map[WIIMOD_CLASSIC_KEY_A], | 
|  | !(ext[5] & 0x10)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_classic_map[WIIMOD_CLASSIC_KEY_X], | 
|  | !(ext[5] & 0x08)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_classic_map[WIIMOD_CLASSIC_KEY_ZR], | 
|  | !(ext[5] & 0x04)); | 
|  |  | 
|  | if (!wiimote_dpad_as_analog) { | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_classic_map[WIIMOD_CLASSIC_KEY_RIGHT], | 
|  | !(ext[4] & 0x80)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_classic_map[WIIMOD_CLASSIC_KEY_DOWN], | 
|  | !(ext[4] & 0x40)); | 
|  |  | 
|  | if (wdata->state.flags & WIIPROTO_FLAG_MP_ACTIVE) { | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_classic_map[WIIMOD_CLASSIC_KEY_LEFT], | 
|  | !(ext[1] & 0x01)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_classic_map[WIIMOD_CLASSIC_KEY_UP], | 
|  | !(ext[0] & 0x01)); | 
|  | } else { | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_classic_map[WIIMOD_CLASSIC_KEY_LEFT], | 
|  | !(ext[5] & 0x02)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_classic_map[WIIMOD_CLASSIC_KEY_UP], | 
|  | !(ext[5] & 0x01)); | 
|  | } | 
|  | } | 
|  |  | 
|  | input_sync(wdata->extension.input); | 
|  | } | 
|  |  | 
|  | static int wiimod_classic_open(struct input_dev *dev) | 
|  | { | 
|  | struct wiimote_data *wdata = input_get_drvdata(dev); | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wdata->state.flags |= WIIPROTO_FLAG_EXT_USED; | 
|  | wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL); | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void wiimod_classic_close(struct input_dev *dev) | 
|  | { | 
|  | struct wiimote_data *wdata = input_get_drvdata(dev); | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wdata->state.flags &= ~WIIPROTO_FLAG_EXT_USED; | 
|  | wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL); | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  | } | 
|  |  | 
|  | static int wiimod_classic_probe(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | int ret, i; | 
|  |  | 
|  | wdata->extension.input = input_allocate_device(); | 
|  | if (!wdata->extension.input) | 
|  | return -ENOMEM; | 
|  |  | 
|  | input_set_drvdata(wdata->extension.input, wdata); | 
|  | wdata->extension.input->open = wiimod_classic_open; | 
|  | wdata->extension.input->close = wiimod_classic_close; | 
|  | wdata->extension.input->dev.parent = &wdata->hdev->dev; | 
|  | wdata->extension.input->id.bustype = wdata->hdev->bus; | 
|  | wdata->extension.input->id.vendor = wdata->hdev->vendor; | 
|  | wdata->extension.input->id.product = wdata->hdev->product; | 
|  | wdata->extension.input->id.version = wdata->hdev->version; | 
|  | wdata->extension.input->name = WIIMOTE_NAME " Classic Controller"; | 
|  |  | 
|  | set_bit(EV_KEY, wdata->extension.input->evbit); | 
|  | for (i = 0; i < WIIMOD_CLASSIC_KEY_NUM; ++i) | 
|  | set_bit(wiimod_classic_map[i], | 
|  | wdata->extension.input->keybit); | 
|  |  | 
|  | set_bit(EV_ABS, wdata->extension.input->evbit); | 
|  | set_bit(ABS_HAT1X, wdata->extension.input->absbit); | 
|  | set_bit(ABS_HAT1Y, wdata->extension.input->absbit); | 
|  | set_bit(ABS_HAT2X, wdata->extension.input->absbit); | 
|  | set_bit(ABS_HAT2Y, wdata->extension.input->absbit); | 
|  | set_bit(ABS_HAT3X, wdata->extension.input->absbit); | 
|  | set_bit(ABS_HAT3Y, wdata->extension.input->absbit); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_HAT1X, -30, 30, 1, 1); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_HAT1Y, -30, 30, 1, 1); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_HAT2X, -30, 30, 1, 1); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_HAT2Y, -30, 30, 1, 1); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_HAT3X, -30, 30, 1, 1); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_HAT3Y, -30, 30, 1, 1); | 
|  |  | 
|  | ret = input_register_device(wdata->extension.input); | 
|  | if (ret) | 
|  | goto err_free; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_free: | 
|  | input_free_device(wdata->extension.input); | 
|  | wdata->extension.input = NULL; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void wiimod_classic_remove(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | if (!wdata->extension.input) | 
|  | return; | 
|  |  | 
|  | input_unregister_device(wdata->extension.input); | 
|  | wdata->extension.input = NULL; | 
|  | } | 
|  |  | 
|  | static const struct wiimod_ops wiimod_classic = { | 
|  | .flags = 0, | 
|  | .arg = 0, | 
|  | .probe = wiimod_classic_probe, | 
|  | .remove = wiimod_classic_remove, | 
|  | .in_ext = wiimod_classic_in_ext, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Balance Board Extension | 
|  | * The Nintendo Wii Balance Board provides four hardware weight sensor plus a | 
|  | * single push button. No other peripherals are available. However, the | 
|  | * balance-board data is sent via a standard Wii Remote extension. All other | 
|  | * data for non-present hardware is zeroed out. | 
|  | * Some 3rd party devices react allergic if we try to access normal Wii Remote | 
|  | * hardware, so this extension module should be the only module that is loaded | 
|  | * on balance boards. | 
|  | * The balance board needs 8 bytes extension data instead of basic 6 bytes so | 
|  | * it needs the WIIMOD_FLAG_EXT8 flag. | 
|  | */ | 
|  |  | 
|  | static void wiimod_bboard_in_keys(struct wiimote_data *wdata, const __u8 *keys) | 
|  | { | 
|  | input_report_key(wdata->extension.input, BTN_A, | 
|  | !!(keys[1] & 0x08)); | 
|  | input_sync(wdata->extension.input); | 
|  | } | 
|  |  | 
|  | static void wiimod_bboard_in_ext(struct wiimote_data *wdata, | 
|  | const __u8 *ext) | 
|  | { | 
|  | __s32 val[4], tmp, div; | 
|  | unsigned int i; | 
|  | struct wiimote_state *s = &wdata->state; | 
|  |  | 
|  | /* | 
|  | * Balance board data layout: | 
|  | * | 
|  | *   Byte |  8  7  6  5  4  3  2  1  | | 
|  | *   -----+--------------------------+ | 
|  | *    1   |    Top Right <15:8>      | | 
|  | *    2   |    Top Right  <7:0>      | | 
|  | *   -----+--------------------------+ | 
|  | *    3   | Bottom Right <15:8>      | | 
|  | *    4   | Bottom Right  <7:0>      | | 
|  | *   -----+--------------------------+ | 
|  | *    5   |     Top Left <15:8>      | | 
|  | *    6   |     Top Left  <7:0>      | | 
|  | *   -----+--------------------------+ | 
|  | *    7   |  Bottom Left <15:8>      | | 
|  | *    8   |  Bottom Left  <7:0>      | | 
|  | *   -----+--------------------------+ | 
|  | * | 
|  | * These values represent the weight-measurements of the Wii-balance | 
|  | * board with 16bit precision. | 
|  | * | 
|  | * The balance-board is never reported interleaved with motionp. | 
|  | */ | 
|  |  | 
|  | val[0] = ext[0]; | 
|  | val[0] <<= 8; | 
|  | val[0] |= ext[1]; | 
|  |  | 
|  | val[1] = ext[2]; | 
|  | val[1] <<= 8; | 
|  | val[1] |= ext[3]; | 
|  |  | 
|  | val[2] = ext[4]; | 
|  | val[2] <<= 8; | 
|  | val[2] |= ext[5]; | 
|  |  | 
|  | val[3] = ext[6]; | 
|  | val[3] <<= 8; | 
|  | val[3] |= ext[7]; | 
|  |  | 
|  | /* apply calibration data */ | 
|  | for (i = 0; i < 4; i++) { | 
|  | if (val[i] <= s->calib_bboard[i][0]) { | 
|  | tmp = 0; | 
|  | } else if (val[i] < s->calib_bboard[i][1]) { | 
|  | tmp = val[i] - s->calib_bboard[i][0]; | 
|  | tmp *= 1700; | 
|  | div = s->calib_bboard[i][1] - s->calib_bboard[i][0]; | 
|  | tmp /= div ? div : 1; | 
|  | } else { | 
|  | tmp = val[i] - s->calib_bboard[i][1]; | 
|  | tmp *= 1700; | 
|  | div = s->calib_bboard[i][2] - s->calib_bboard[i][1]; | 
|  | tmp /= div ? div : 1; | 
|  | tmp += 1700; | 
|  | } | 
|  | val[i] = tmp; | 
|  | } | 
|  |  | 
|  | input_report_abs(wdata->extension.input, ABS_HAT0X, val[0]); | 
|  | input_report_abs(wdata->extension.input, ABS_HAT0Y, val[1]); | 
|  | input_report_abs(wdata->extension.input, ABS_HAT1X, val[2]); | 
|  | input_report_abs(wdata->extension.input, ABS_HAT1Y, val[3]); | 
|  | input_sync(wdata->extension.input); | 
|  | } | 
|  |  | 
|  | static int wiimod_bboard_open(struct input_dev *dev) | 
|  | { | 
|  | struct wiimote_data *wdata = input_get_drvdata(dev); | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wdata->state.flags |= WIIPROTO_FLAG_EXT_USED; | 
|  | wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL); | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void wiimod_bboard_close(struct input_dev *dev) | 
|  | { | 
|  | struct wiimote_data *wdata = input_get_drvdata(dev); | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wdata->state.flags &= ~WIIPROTO_FLAG_EXT_USED; | 
|  | wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL); | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  | } | 
|  |  | 
|  | static ssize_t wiimod_bboard_calib_show(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *out) | 
|  | { | 
|  | struct wiimote_data *wdata = dev_to_wii(dev); | 
|  | int i, j, ret; | 
|  | __u16 val; | 
|  | __u8 buf[24], offs; | 
|  |  | 
|  | ret = wiimote_cmd_acquire(wdata); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = wiimote_cmd_read(wdata, 0xa40024, buf, 12); | 
|  | if (ret != 12) { | 
|  | wiimote_cmd_release(wdata); | 
|  | return ret < 0 ? ret : -EIO; | 
|  | } | 
|  | ret = wiimote_cmd_read(wdata, 0xa40024 + 12, buf + 12, 12); | 
|  | if (ret != 12) { | 
|  | wiimote_cmd_release(wdata); | 
|  | return ret < 0 ? ret : -EIO; | 
|  | } | 
|  |  | 
|  | wiimote_cmd_release(wdata); | 
|  |  | 
|  | spin_lock_irq(&wdata->state.lock); | 
|  | offs = 0; | 
|  | for (i = 0; i < 3; ++i) { | 
|  | for (j = 0; j < 4; ++j) { | 
|  | wdata->state.calib_bboard[j][i] = buf[offs]; | 
|  | wdata->state.calib_bboard[j][i] <<= 8; | 
|  | wdata->state.calib_bboard[j][i] |= buf[offs + 1]; | 
|  | offs += 2; | 
|  | } | 
|  | } | 
|  | spin_unlock_irq(&wdata->state.lock); | 
|  |  | 
|  | ret = 0; | 
|  | for (i = 0; i < 3; ++i) { | 
|  | for (j = 0; j < 4; ++j) { | 
|  | val = wdata->state.calib_bboard[j][i]; | 
|  | if (i == 2 && j == 3) | 
|  | ret += sprintf(&out[ret], "%04x\n", val); | 
|  | else | 
|  | ret += sprintf(&out[ret], "%04x:", val); | 
|  | } | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(bboard_calib, S_IRUGO, wiimod_bboard_calib_show, NULL); | 
|  |  | 
|  | static int wiimod_bboard_probe(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | int ret, i, j; | 
|  | __u8 buf[24], offs; | 
|  |  | 
|  | wiimote_cmd_acquire_noint(wdata); | 
|  |  | 
|  | ret = wiimote_cmd_read(wdata, 0xa40024, buf, 12); | 
|  | if (ret != 12) { | 
|  | wiimote_cmd_release(wdata); | 
|  | return ret < 0 ? ret : -EIO; | 
|  | } | 
|  | ret = wiimote_cmd_read(wdata, 0xa40024 + 12, buf + 12, 12); | 
|  | if (ret != 12) { | 
|  | wiimote_cmd_release(wdata); | 
|  | return ret < 0 ? ret : -EIO; | 
|  | } | 
|  |  | 
|  | wiimote_cmd_release(wdata); | 
|  |  | 
|  | offs = 0; | 
|  | for (i = 0; i < 3; ++i) { | 
|  | for (j = 0; j < 4; ++j) { | 
|  | wdata->state.calib_bboard[j][i] = buf[offs]; | 
|  | wdata->state.calib_bboard[j][i] <<= 8; | 
|  | wdata->state.calib_bboard[j][i] |= buf[offs + 1]; | 
|  | offs += 2; | 
|  | } | 
|  | } | 
|  |  | 
|  | wdata->extension.input = input_allocate_device(); | 
|  | if (!wdata->extension.input) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ret = device_create_file(&wdata->hdev->dev, | 
|  | &dev_attr_bboard_calib); | 
|  | if (ret) { | 
|  | hid_err(wdata->hdev, "cannot create sysfs attribute\n"); | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | input_set_drvdata(wdata->extension.input, wdata); | 
|  | wdata->extension.input->open = wiimod_bboard_open; | 
|  | wdata->extension.input->close = wiimod_bboard_close; | 
|  | wdata->extension.input->dev.parent = &wdata->hdev->dev; | 
|  | wdata->extension.input->id.bustype = wdata->hdev->bus; | 
|  | wdata->extension.input->id.vendor = wdata->hdev->vendor; | 
|  | wdata->extension.input->id.product = wdata->hdev->product; | 
|  | wdata->extension.input->id.version = wdata->hdev->version; | 
|  | wdata->extension.input->name = WIIMOTE_NAME " Balance Board"; | 
|  |  | 
|  | set_bit(EV_KEY, wdata->extension.input->evbit); | 
|  | set_bit(BTN_A, wdata->extension.input->keybit); | 
|  |  | 
|  | set_bit(EV_ABS, wdata->extension.input->evbit); | 
|  | set_bit(ABS_HAT0X, wdata->extension.input->absbit); | 
|  | set_bit(ABS_HAT0Y, wdata->extension.input->absbit); | 
|  | set_bit(ABS_HAT1X, wdata->extension.input->absbit); | 
|  | set_bit(ABS_HAT1Y, wdata->extension.input->absbit); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_HAT0X, 0, 65535, 2, 4); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_HAT0Y, 0, 65535, 2, 4); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_HAT1X, 0, 65535, 2, 4); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_HAT1Y, 0, 65535, 2, 4); | 
|  |  | 
|  | ret = input_register_device(wdata->extension.input); | 
|  | if (ret) | 
|  | goto err_file; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_file: | 
|  | device_remove_file(&wdata->hdev->dev, | 
|  | &dev_attr_bboard_calib); | 
|  | err_free: | 
|  | input_free_device(wdata->extension.input); | 
|  | wdata->extension.input = NULL; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void wiimod_bboard_remove(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | if (!wdata->extension.input) | 
|  | return; | 
|  |  | 
|  | input_unregister_device(wdata->extension.input); | 
|  | wdata->extension.input = NULL; | 
|  | device_remove_file(&wdata->hdev->dev, | 
|  | &dev_attr_bboard_calib); | 
|  | } | 
|  |  | 
|  | static const struct wiimod_ops wiimod_bboard = { | 
|  | .flags = WIIMOD_FLAG_EXT8, | 
|  | .arg = 0, | 
|  | .probe = wiimod_bboard_probe, | 
|  | .remove = wiimod_bboard_remove, | 
|  | .in_keys = wiimod_bboard_in_keys, | 
|  | .in_ext = wiimod_bboard_in_ext, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Pro Controller | 
|  | * Released with the Wii U was the Nintendo Wii U Pro Controller. It does not | 
|  | * work together with the classic Wii, but only with the new Wii U. However, it | 
|  | * uses the same protocol and provides a builtin "classic controller pro" | 
|  | * extension, few standard buttons, a rumble motor, 4 LEDs and a battery. | 
|  | * We provide all these via a standard extension device as the device doesn't | 
|  | * feature an extension port. | 
|  | */ | 
|  |  | 
|  | enum wiimod_pro_keys { | 
|  | WIIMOD_PRO_KEY_A, | 
|  | WIIMOD_PRO_KEY_B, | 
|  | WIIMOD_PRO_KEY_X, | 
|  | WIIMOD_PRO_KEY_Y, | 
|  | WIIMOD_PRO_KEY_PLUS, | 
|  | WIIMOD_PRO_KEY_MINUS, | 
|  | WIIMOD_PRO_KEY_HOME, | 
|  | WIIMOD_PRO_KEY_LEFT, | 
|  | WIIMOD_PRO_KEY_RIGHT, | 
|  | WIIMOD_PRO_KEY_UP, | 
|  | WIIMOD_PRO_KEY_DOWN, | 
|  | WIIMOD_PRO_KEY_TL, | 
|  | WIIMOD_PRO_KEY_TR, | 
|  | WIIMOD_PRO_KEY_ZL, | 
|  | WIIMOD_PRO_KEY_ZR, | 
|  | WIIMOD_PRO_KEY_THUMBL, | 
|  | WIIMOD_PRO_KEY_THUMBR, | 
|  | WIIMOD_PRO_KEY_NUM, | 
|  | }; | 
|  |  | 
|  | static const __u16 wiimod_pro_map[] = { | 
|  | BTN_EAST,	/* WIIMOD_PRO_KEY_A */ | 
|  | BTN_SOUTH,	/* WIIMOD_PRO_KEY_B */ | 
|  | BTN_NORTH,	/* WIIMOD_PRO_KEY_X */ | 
|  | BTN_WEST,	/* WIIMOD_PRO_KEY_Y */ | 
|  | BTN_START,	/* WIIMOD_PRO_KEY_PLUS */ | 
|  | BTN_SELECT,	/* WIIMOD_PRO_KEY_MINUS */ | 
|  | BTN_MODE,	/* WIIMOD_PRO_KEY_HOME */ | 
|  | BTN_DPAD_LEFT,	/* WIIMOD_PRO_KEY_LEFT */ | 
|  | BTN_DPAD_RIGHT,	/* WIIMOD_PRO_KEY_RIGHT */ | 
|  | BTN_DPAD_UP,	/* WIIMOD_PRO_KEY_UP */ | 
|  | BTN_DPAD_DOWN,	/* WIIMOD_PRO_KEY_DOWN */ | 
|  | BTN_TL,		/* WIIMOD_PRO_KEY_TL */ | 
|  | BTN_TR,		/* WIIMOD_PRO_KEY_TR */ | 
|  | BTN_TL2,	/* WIIMOD_PRO_KEY_ZL */ | 
|  | BTN_TR2,	/* WIIMOD_PRO_KEY_ZR */ | 
|  | BTN_THUMBL,	/* WIIMOD_PRO_KEY_THUMBL */ | 
|  | BTN_THUMBR,	/* WIIMOD_PRO_KEY_THUMBR */ | 
|  | }; | 
|  |  | 
|  | static void wiimod_pro_in_ext(struct wiimote_data *wdata, const __u8 *ext) | 
|  | { | 
|  | __s16 rx, ry, lx, ly; | 
|  |  | 
|  | /*   Byte |  8  |  7  |  6  |  5  |  4  |  3  |  2  |  1  | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    1   |                   LX <7:0>                    | | 
|  | *   -----+-----------------------+-----------------------+ | 
|  | *    2   |  0     0     0     0  |       LX <11:8>       | | 
|  | *   -----+-----------------------+-----------------------+ | 
|  | *    3   |                   RX <7:0>                    | | 
|  | *   -----+-----------------------+-----------------------+ | 
|  | *    4   |  0     0     0     0  |       RX <11:8>       | | 
|  | *   -----+-----------------------+-----------------------+ | 
|  | *    5   |                   LY <7:0>                    | | 
|  | *   -----+-----------------------+-----------------------+ | 
|  | *    6   |  0     0     0     0  |       LY <11:8>       | | 
|  | *   -----+-----------------------+-----------------------+ | 
|  | *    7   |                   RY <7:0>                    | | 
|  | *   -----+-----------------------+-----------------------+ | 
|  | *    8   |  0     0     0     0  |       RY <11:8>       | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    9   | BDR | BDD | BLT | B-  | BH  | B+  | BRT |  1  | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *   10   | BZL | BB  | BY  | BA  | BX  | BZR | BDL | BDU | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *   11   |  1  |     BATTERY     | USB |CHARG|LTHUM|RTHUM| | 
|  | *   -----+-----+-----------------+-----------+-----+-----+ | 
|  | * All buttons are low-active (0 if pressed) | 
|  | * RX and RY are right analog stick | 
|  | * LX and LY are left analog stick | 
|  | * BLT is left trigger, BRT is right trigger. | 
|  | * BDR, BDD, BDL, BDU form the D-Pad with right, down, left, up buttons | 
|  | * BZL is left Z button and BZR is right Z button | 
|  | * B-, BH, B+ are +, HOME and - buttons | 
|  | * BB, BY, BA, BX are A, B, X, Y buttons | 
|  | * | 
|  | * Bits marked as 0/1 are unknown and never changed during tests. | 
|  | * | 
|  | * Not entirely verified: | 
|  | *   CHARG: 1 if uncharging, 0 if charging | 
|  | *   USB: 1 if not connected, 0 if connected | 
|  | *   BATTERY: battery capacity from 000 (empty) to 100 (full) | 
|  | */ | 
|  |  | 
|  | lx = (ext[0] & 0xff) | ((ext[1] & 0x0f) << 8); | 
|  | rx = (ext[2] & 0xff) | ((ext[3] & 0x0f) << 8); | 
|  | ly = (ext[4] & 0xff) | ((ext[5] & 0x0f) << 8); | 
|  | ry = (ext[6] & 0xff) | ((ext[7] & 0x0f) << 8); | 
|  |  | 
|  | /* zero-point offsets */ | 
|  | lx -= 0x800; | 
|  | ly = 0x800 - ly; | 
|  | rx -= 0x800; | 
|  | ry = 0x800 - ry; | 
|  |  | 
|  | /* Trivial automatic calibration. We don't know any calibration data | 
|  | * in the EEPROM so we must use the first report to calibrate the | 
|  | * null-position of the analog sticks. Users can retrigger calibration | 
|  | * via sysfs, or set it explicitly. If data is off more than abs(500), | 
|  | * we skip calibration as the sticks are likely to be moved already. */ | 
|  | if (!(wdata->state.flags & WIIPROTO_FLAG_PRO_CALIB_DONE)) { | 
|  | wdata->state.flags |= WIIPROTO_FLAG_PRO_CALIB_DONE; | 
|  | if (abs(lx) < 500) | 
|  | wdata->state.calib_pro_sticks[0] = -lx; | 
|  | if (abs(ly) < 500) | 
|  | wdata->state.calib_pro_sticks[1] = -ly; | 
|  | if (abs(rx) < 500) | 
|  | wdata->state.calib_pro_sticks[2] = -rx; | 
|  | if (abs(ry) < 500) | 
|  | wdata->state.calib_pro_sticks[3] = -ry; | 
|  | } | 
|  |  | 
|  | /* apply calibration data */ | 
|  | lx += wdata->state.calib_pro_sticks[0]; | 
|  | ly += wdata->state.calib_pro_sticks[1]; | 
|  | rx += wdata->state.calib_pro_sticks[2]; | 
|  | ry += wdata->state.calib_pro_sticks[3]; | 
|  |  | 
|  | input_report_abs(wdata->extension.input, ABS_X, lx); | 
|  | input_report_abs(wdata->extension.input, ABS_Y, ly); | 
|  | input_report_abs(wdata->extension.input, ABS_RX, rx); | 
|  | input_report_abs(wdata->extension.input, ABS_RY, ry); | 
|  |  | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_pro_map[WIIMOD_PRO_KEY_RIGHT], | 
|  | !(ext[8] & 0x80)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_pro_map[WIIMOD_PRO_KEY_DOWN], | 
|  | !(ext[8] & 0x40)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_pro_map[WIIMOD_PRO_KEY_TL], | 
|  | !(ext[8] & 0x20)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_pro_map[WIIMOD_PRO_KEY_MINUS], | 
|  | !(ext[8] & 0x10)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_pro_map[WIIMOD_PRO_KEY_HOME], | 
|  | !(ext[8] & 0x08)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_pro_map[WIIMOD_PRO_KEY_PLUS], | 
|  | !(ext[8] & 0x04)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_pro_map[WIIMOD_PRO_KEY_TR], | 
|  | !(ext[8] & 0x02)); | 
|  |  | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_pro_map[WIIMOD_PRO_KEY_ZL], | 
|  | !(ext[9] & 0x80)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_pro_map[WIIMOD_PRO_KEY_B], | 
|  | !(ext[9] & 0x40)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_pro_map[WIIMOD_PRO_KEY_Y], | 
|  | !(ext[9] & 0x20)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_pro_map[WIIMOD_PRO_KEY_A], | 
|  | !(ext[9] & 0x10)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_pro_map[WIIMOD_PRO_KEY_X], | 
|  | !(ext[9] & 0x08)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_pro_map[WIIMOD_PRO_KEY_ZR], | 
|  | !(ext[9] & 0x04)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_pro_map[WIIMOD_PRO_KEY_LEFT], | 
|  | !(ext[9] & 0x02)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_pro_map[WIIMOD_PRO_KEY_UP], | 
|  | !(ext[9] & 0x01)); | 
|  |  | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_pro_map[WIIMOD_PRO_KEY_THUMBL], | 
|  | !(ext[10] & 0x02)); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_pro_map[WIIMOD_PRO_KEY_THUMBR], | 
|  | !(ext[10] & 0x01)); | 
|  |  | 
|  | input_sync(wdata->extension.input); | 
|  | } | 
|  |  | 
|  | static int wiimod_pro_open(struct input_dev *dev) | 
|  | { | 
|  | struct wiimote_data *wdata = input_get_drvdata(dev); | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wdata->state.flags |= WIIPROTO_FLAG_EXT_USED; | 
|  | wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL); | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void wiimod_pro_close(struct input_dev *dev) | 
|  | { | 
|  | struct wiimote_data *wdata = input_get_drvdata(dev); | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wdata->state.flags &= ~WIIPROTO_FLAG_EXT_USED; | 
|  | wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL); | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  | } | 
|  |  | 
|  | static int wiimod_pro_play(struct input_dev *dev, void *data, | 
|  | struct ff_effect *eff) | 
|  | { | 
|  | struct wiimote_data *wdata = input_get_drvdata(dev); | 
|  | __u8 value; | 
|  |  | 
|  | /* | 
|  | * The wiimote supports only a single rumble motor so if any magnitude | 
|  | * is set to non-zero then we start the rumble motor. If both are set to | 
|  | * zero, we stop the rumble motor. | 
|  | */ | 
|  |  | 
|  | if (eff->u.rumble.strong_magnitude || eff->u.rumble.weak_magnitude) | 
|  | value = 1; | 
|  | else | 
|  | value = 0; | 
|  |  | 
|  | /* Locking state.lock here might deadlock with input_event() calls. | 
|  | * schedule_work acts as barrier. Merging multiple changes is fine. */ | 
|  | wdata->state.cache_rumble = value; | 
|  | schedule_work(&wdata->rumble_worker); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static ssize_t wiimod_pro_calib_show(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *out) | 
|  | { | 
|  | struct wiimote_data *wdata = dev_to_wii(dev); | 
|  | int r; | 
|  |  | 
|  | r = 0; | 
|  | r += sprintf(&out[r], "%+06hd:", wdata->state.calib_pro_sticks[0]); | 
|  | r += sprintf(&out[r], "%+06hd ", wdata->state.calib_pro_sticks[1]); | 
|  | r += sprintf(&out[r], "%+06hd:", wdata->state.calib_pro_sticks[2]); | 
|  | r += sprintf(&out[r], "%+06hd\n", wdata->state.calib_pro_sticks[3]); | 
|  |  | 
|  | return r; | 
|  | } | 
|  |  | 
|  | static ssize_t wiimod_pro_calib_store(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct wiimote_data *wdata = dev_to_wii(dev); | 
|  | int r; | 
|  | s16 x1, y1, x2, y2; | 
|  |  | 
|  | if (!strncmp(buf, "scan\n", 5)) { | 
|  | spin_lock_irq(&wdata->state.lock); | 
|  | wdata->state.flags &= ~WIIPROTO_FLAG_PRO_CALIB_DONE; | 
|  | spin_unlock_irq(&wdata->state.lock); | 
|  | } else { | 
|  | r = sscanf(buf, "%hd:%hd %hd:%hd", &x1, &y1, &x2, &y2); | 
|  | if (r != 4) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock_irq(&wdata->state.lock); | 
|  | wdata->state.flags |= WIIPROTO_FLAG_PRO_CALIB_DONE; | 
|  | spin_unlock_irq(&wdata->state.lock); | 
|  |  | 
|  | wdata->state.calib_pro_sticks[0] = x1; | 
|  | wdata->state.calib_pro_sticks[1] = y1; | 
|  | wdata->state.calib_pro_sticks[2] = x2; | 
|  | wdata->state.calib_pro_sticks[3] = y2; | 
|  | } | 
|  |  | 
|  | return strnlen(buf, PAGE_SIZE); | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(pro_calib, S_IRUGO|S_IWUSR|S_IWGRP, wiimod_pro_calib_show, | 
|  | wiimod_pro_calib_store); | 
|  |  | 
|  | static int wiimod_pro_probe(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | int ret, i; | 
|  | unsigned long flags; | 
|  |  | 
|  | INIT_WORK(&wdata->rumble_worker, wiimod_rumble_worker); | 
|  | wdata->state.calib_pro_sticks[0] = 0; | 
|  | wdata->state.calib_pro_sticks[1] = 0; | 
|  | wdata->state.calib_pro_sticks[2] = 0; | 
|  | wdata->state.calib_pro_sticks[3] = 0; | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wdata->state.flags &= ~WIIPROTO_FLAG_PRO_CALIB_DONE; | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  |  | 
|  | wdata->extension.input = input_allocate_device(); | 
|  | if (!wdata->extension.input) | 
|  | return -ENOMEM; | 
|  |  | 
|  | set_bit(FF_RUMBLE, wdata->extension.input->ffbit); | 
|  | input_set_drvdata(wdata->extension.input, wdata); | 
|  |  | 
|  | if (input_ff_create_memless(wdata->extension.input, NULL, | 
|  | wiimod_pro_play)) { | 
|  | ret = -ENOMEM; | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | ret = device_create_file(&wdata->hdev->dev, | 
|  | &dev_attr_pro_calib); | 
|  | if (ret) { | 
|  | hid_err(wdata->hdev, "cannot create sysfs attribute\n"); | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | wdata->extension.input->open = wiimod_pro_open; | 
|  | wdata->extension.input->close = wiimod_pro_close; | 
|  | wdata->extension.input->dev.parent = &wdata->hdev->dev; | 
|  | wdata->extension.input->id.bustype = wdata->hdev->bus; | 
|  | wdata->extension.input->id.vendor = wdata->hdev->vendor; | 
|  | wdata->extension.input->id.product = wdata->hdev->product; | 
|  | wdata->extension.input->id.version = wdata->hdev->version; | 
|  | wdata->extension.input->name = WIIMOTE_NAME " Pro Controller"; | 
|  |  | 
|  | set_bit(EV_KEY, wdata->extension.input->evbit); | 
|  | for (i = 0; i < WIIMOD_PRO_KEY_NUM; ++i) | 
|  | set_bit(wiimod_pro_map[i], | 
|  | wdata->extension.input->keybit); | 
|  |  | 
|  | set_bit(EV_ABS, wdata->extension.input->evbit); | 
|  | set_bit(ABS_X, wdata->extension.input->absbit); | 
|  | set_bit(ABS_Y, wdata->extension.input->absbit); | 
|  | set_bit(ABS_RX, wdata->extension.input->absbit); | 
|  | set_bit(ABS_RY, wdata->extension.input->absbit); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_X, -0x400, 0x400, 4, 100); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_Y, -0x400, 0x400, 4, 100); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_RX, -0x400, 0x400, 4, 100); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_RY, -0x400, 0x400, 4, 100); | 
|  |  | 
|  | ret = input_register_device(wdata->extension.input); | 
|  | if (ret) | 
|  | goto err_file; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_file: | 
|  | device_remove_file(&wdata->hdev->dev, | 
|  | &dev_attr_pro_calib); | 
|  | err_free: | 
|  | input_free_device(wdata->extension.input); | 
|  | wdata->extension.input = NULL; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void wiimod_pro_remove(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | if (!wdata->extension.input) | 
|  | return; | 
|  |  | 
|  | input_unregister_device(wdata->extension.input); | 
|  | wdata->extension.input = NULL; | 
|  | cancel_work_sync(&wdata->rumble_worker); | 
|  | device_remove_file(&wdata->hdev->dev, | 
|  | &dev_attr_pro_calib); | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wiiproto_req_rumble(wdata, 0); | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  | } | 
|  |  | 
|  | static const struct wiimod_ops wiimod_pro = { | 
|  | .flags = WIIMOD_FLAG_EXT16, | 
|  | .arg = 0, | 
|  | .probe = wiimod_pro_probe, | 
|  | .remove = wiimod_pro_remove, | 
|  | .in_ext = wiimod_pro_in_ext, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Drums | 
|  | * Guitar-Hero, Rock-Band and other games came bundled with drums which can | 
|  | * be plugged as extension to a Wiimote. Drum-reports are still not entirely | 
|  | * figured out, but the most important information is known. | 
|  | * We create a separate device for drums and report all information via this | 
|  | * input device. | 
|  | */ | 
|  |  | 
|  | static inline void wiimod_drums_report_pressure(struct wiimote_data *wdata, | 
|  | __u8 none, __u8 which, | 
|  | __u8 pressure, __u8 onoff, | 
|  | __u8 *store, __u16 code, | 
|  | __u8 which_code) | 
|  | { | 
|  | static const __u8 default_pressure = 3; | 
|  |  | 
|  | if (!none && which == which_code) { | 
|  | *store = pressure; | 
|  | input_report_abs(wdata->extension.input, code, *store); | 
|  | } else if (onoff != !!*store) { | 
|  | *store = onoff ? default_pressure : 0; | 
|  | input_report_abs(wdata->extension.input, code, *store); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void wiimod_drums_in_ext(struct wiimote_data *wdata, const __u8 *ext) | 
|  | { | 
|  | __u8 pressure, which, none, hhp, sx, sy; | 
|  | __u8 o, r, y, g, b, bass, bm, bp; | 
|  |  | 
|  | /*   Byte |  8  |  7  |  6  |  5  |  4  |  3  |  2  |  1  | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    1   |  0  |  0  |              SX <5:0>             | | 
|  | *    2   |  0  |  0  |              SY <5:0>             | | 
|  | *   -----+-----+-----+-----------------------------+-----+ | 
|  | *    3   | HPP | NON |         WHICH <5:1>         |  ?  | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    4   |   SOFT <7:5>    |  0  |  1  |  1  |  0  |  ?  | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    5   |  ?  |  1  |  1  | B-  |  1  | B+  |  1  |  ?  | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    6   |  O  |  R  |  Y  |  G  |  B  | BSS |  1  |  1  | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | * All buttons are 0 if pressed | 
|  | * | 
|  | * With Motion+ enabled, the following bits will get invalid: | 
|  | *   Byte |  8  |  7  |  6  |  5  |  4  |  3  |  2  |  1  | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    1   |  0  |  0  |              SX <5:1>       |XXXXX| | 
|  | *    2   |  0  |  0  |              SY <5:1>       |XXXXX| | 
|  | *   -----+-----+-----+-----------------------------+-----+ | 
|  | *    3   | HPP | NON |         WHICH <5:1>         |  ?  | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    4   |   SOFT <7:5>    |  0  |  1  |  1  |  0  |  ?  | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    5   |  ?  |  1  |  1  | B-  |  1  | B+  |  1  |XXXXX| | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    6   |  O  |  R  |  Y  |  G  |  B  | BSS |XXXXX|XXXXX| | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | */ | 
|  |  | 
|  | pressure = 7 - (ext[3] >> 5); | 
|  | which = (ext[2] >> 1) & 0x1f; | 
|  | none = !!(ext[2] & 0x40); | 
|  | hhp = !(ext[2] & 0x80); | 
|  | sx = ext[0] & 0x3f; | 
|  | sy = ext[1] & 0x3f; | 
|  | o = !(ext[5] & 0x80); | 
|  | r = !(ext[5] & 0x40); | 
|  | y = !(ext[5] & 0x20); | 
|  | g = !(ext[5] & 0x10); | 
|  | b = !(ext[5] & 0x08); | 
|  | bass = !(ext[5] & 0x04); | 
|  | bm = !(ext[4] & 0x10); | 
|  | bp = !(ext[4] & 0x04); | 
|  |  | 
|  | if (wdata->state.flags & WIIPROTO_FLAG_MP_ACTIVE) { | 
|  | sx &= 0x3e; | 
|  | sy &= 0x3e; | 
|  | } | 
|  |  | 
|  | wiimod_drums_report_pressure(wdata, none, which, pressure, | 
|  | o, &wdata->state.pressure_drums[0], | 
|  | ABS_HAT2Y, 0x0e); | 
|  | wiimod_drums_report_pressure(wdata, none, which, pressure, | 
|  | r, &wdata->state.pressure_drums[1], | 
|  | ABS_HAT0X, 0x19); | 
|  | wiimod_drums_report_pressure(wdata, none, which, pressure, | 
|  | y, &wdata->state.pressure_drums[2], | 
|  | ABS_HAT2X, 0x11); | 
|  | wiimod_drums_report_pressure(wdata, none, which, pressure, | 
|  | g, &wdata->state.pressure_drums[3], | 
|  | ABS_HAT1X, 0x12); | 
|  | wiimod_drums_report_pressure(wdata, none, which, pressure, | 
|  | b, &wdata->state.pressure_drums[4], | 
|  | ABS_HAT0Y, 0x0f); | 
|  |  | 
|  | /* Bass shares pressure with hi-hat (set via hhp) */ | 
|  | wiimod_drums_report_pressure(wdata, none, hhp ? 0xff : which, pressure, | 
|  | bass, &wdata->state.pressure_drums[5], | 
|  | ABS_HAT3X, 0x1b); | 
|  | /* Hi-hat has no on/off values, just pressure. Force to off/0. */ | 
|  | wiimod_drums_report_pressure(wdata, none, hhp ? which : 0xff, pressure, | 
|  | 0, &wdata->state.pressure_drums[6], | 
|  | ABS_HAT3Y, 0x0e); | 
|  |  | 
|  | input_report_abs(wdata->extension.input, ABS_X, sx - 0x20); | 
|  | input_report_abs(wdata->extension.input, ABS_Y, sy - 0x20); | 
|  |  | 
|  | input_report_key(wdata->extension.input, BTN_START, bp); | 
|  | input_report_key(wdata->extension.input, BTN_SELECT, bm); | 
|  |  | 
|  | input_sync(wdata->extension.input); | 
|  | } | 
|  |  | 
|  | static int wiimod_drums_open(struct input_dev *dev) | 
|  | { | 
|  | struct wiimote_data *wdata = input_get_drvdata(dev); | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wdata->state.flags |= WIIPROTO_FLAG_EXT_USED; | 
|  | wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL); | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void wiimod_drums_close(struct input_dev *dev) | 
|  | { | 
|  | struct wiimote_data *wdata = input_get_drvdata(dev); | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wdata->state.flags &= ~WIIPROTO_FLAG_EXT_USED; | 
|  | wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL); | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  | } | 
|  |  | 
|  | static int wiimod_drums_probe(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | wdata->extension.input = input_allocate_device(); | 
|  | if (!wdata->extension.input) | 
|  | return -ENOMEM; | 
|  |  | 
|  | input_set_drvdata(wdata->extension.input, wdata); | 
|  | wdata->extension.input->open = wiimod_drums_open; | 
|  | wdata->extension.input->close = wiimod_drums_close; | 
|  | wdata->extension.input->dev.parent = &wdata->hdev->dev; | 
|  | wdata->extension.input->id.bustype = wdata->hdev->bus; | 
|  | wdata->extension.input->id.vendor = wdata->hdev->vendor; | 
|  | wdata->extension.input->id.product = wdata->hdev->product; | 
|  | wdata->extension.input->id.version = wdata->hdev->version; | 
|  | wdata->extension.input->name = WIIMOTE_NAME " Drums"; | 
|  |  | 
|  | set_bit(EV_KEY, wdata->extension.input->evbit); | 
|  | set_bit(BTN_START, wdata->extension.input->keybit); | 
|  | set_bit(BTN_SELECT, wdata->extension.input->keybit); | 
|  |  | 
|  | set_bit(EV_ABS, wdata->extension.input->evbit); | 
|  | set_bit(ABS_X, wdata->extension.input->absbit); | 
|  | set_bit(ABS_Y, wdata->extension.input->absbit); | 
|  | set_bit(ABS_HAT0X, wdata->extension.input->absbit); | 
|  | set_bit(ABS_HAT0Y, wdata->extension.input->absbit); | 
|  | set_bit(ABS_HAT1X, wdata->extension.input->absbit); | 
|  | set_bit(ABS_HAT2X, wdata->extension.input->absbit); | 
|  | set_bit(ABS_HAT2Y, wdata->extension.input->absbit); | 
|  | set_bit(ABS_HAT3X, wdata->extension.input->absbit); | 
|  | set_bit(ABS_HAT3Y, wdata->extension.input->absbit); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_X, -32, 31, 1, 1); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_Y, -32, 31, 1, 1); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_HAT0X, 0, 7, 0, 0); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_HAT0Y, 0, 7, 0, 0); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_HAT1X, 0, 7, 0, 0); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_HAT2X, 0, 7, 0, 0); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_HAT2Y, 0, 7, 0, 0); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_HAT3X, 0, 7, 0, 0); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_HAT3Y, 0, 7, 0, 0); | 
|  |  | 
|  | ret = input_register_device(wdata->extension.input); | 
|  | if (ret) | 
|  | goto err_free; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_free: | 
|  | input_free_device(wdata->extension.input); | 
|  | wdata->extension.input = NULL; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void wiimod_drums_remove(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | if (!wdata->extension.input) | 
|  | return; | 
|  |  | 
|  | input_unregister_device(wdata->extension.input); | 
|  | wdata->extension.input = NULL; | 
|  | } | 
|  |  | 
|  | static const struct wiimod_ops wiimod_drums = { | 
|  | .flags = 0, | 
|  | .arg = 0, | 
|  | .probe = wiimod_drums_probe, | 
|  | .remove = wiimod_drums_remove, | 
|  | .in_ext = wiimod_drums_in_ext, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Guitar | 
|  | * Guitar-Hero, Rock-Band and other games came bundled with guitars which can | 
|  | * be plugged as extension to a Wiimote. | 
|  | * We create a separate device for guitars and report all information via this | 
|  | * input device. | 
|  | */ | 
|  |  | 
|  | enum wiimod_guitar_keys { | 
|  | WIIMOD_GUITAR_KEY_G, | 
|  | WIIMOD_GUITAR_KEY_R, | 
|  | WIIMOD_GUITAR_KEY_Y, | 
|  | WIIMOD_GUITAR_KEY_B, | 
|  | WIIMOD_GUITAR_KEY_O, | 
|  | WIIMOD_GUITAR_KEY_UP, | 
|  | WIIMOD_GUITAR_KEY_DOWN, | 
|  | WIIMOD_GUITAR_KEY_PLUS, | 
|  | WIIMOD_GUITAR_KEY_MINUS, | 
|  | WIIMOD_GUITAR_KEY_NUM, | 
|  | }; | 
|  |  | 
|  | static const __u16 wiimod_guitar_map[] = { | 
|  | BTN_1,			/* WIIMOD_GUITAR_KEY_G */ | 
|  | BTN_2,			/* WIIMOD_GUITAR_KEY_R */ | 
|  | BTN_3,			/* WIIMOD_GUITAR_KEY_Y */ | 
|  | BTN_4,			/* WIIMOD_GUITAR_KEY_B */ | 
|  | BTN_5,			/* WIIMOD_GUITAR_KEY_O */ | 
|  | BTN_DPAD_UP,		/* WIIMOD_GUITAR_KEY_UP */ | 
|  | BTN_DPAD_DOWN,		/* WIIMOD_GUITAR_KEY_DOWN */ | 
|  | BTN_START,		/* WIIMOD_GUITAR_KEY_PLUS */ | 
|  | BTN_SELECT,		/* WIIMOD_GUITAR_KEY_MINUS */ | 
|  | }; | 
|  |  | 
|  | static void wiimod_guitar_in_ext(struct wiimote_data *wdata, const __u8 *ext) | 
|  | { | 
|  | __u8 sx, sy, tb, wb, bd, bm, bp, bo, br, bb, bg, by, bu; | 
|  |  | 
|  | /*   Byte |  8  |  7  |  6  |  5  |  4  |  3  |  2  |  1  | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    1   |  0  |  0  |              SX <5:0>             | | 
|  | *    2   |  0  |  0  |              SY <5:0>             | | 
|  | *   -----+-----+-----+-----+-----------------------------+ | 
|  | *    3   |  0  |  0  |  0  |      TB <4:0>               | | 
|  | *   -----+-----+-----+-----+-----------------------------+ | 
|  | *    4   |  0  |  0  |  0  |      WB <4:0>               | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    5   |  1  | BD  |  1  | B-  |  1  | B+  |  1  |  1  | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    6   | BO  | BR  | BB  | BG  | BY  |  1  |  1  | BU  | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | * All buttons are 0 if pressed | 
|  | * | 
|  | * With Motion+ enabled, it will look like this: | 
|  | *   Byte |  8  |  7  |  6  |  5  |  4  |  3  |  2  |  1  | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    1   |  0  |  0  |              SX <5:1>       | BU  | | 
|  | *    2   |  0  |  0  |              SY <5:1>       |  1  | | 
|  | *   -----+-----+-----+-----+-----------------------+-----+ | 
|  | *    3   |  0  |  0  |  0  |      TB <4:0>               | | 
|  | *   -----+-----+-----+-----+-----------------------------+ | 
|  | *    4   |  0  |  0  |  0  |      WB <4:0>               | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    5   |  1  | BD  |  1  | B-  |  1  | B+  |  1  |XXXXX| | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    6   | BO  | BR  | BB  | BG  | BY  |  1  |XXXXX|XXXXX| | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | */ | 
|  |  | 
|  | sx = ext[0] & 0x3f; | 
|  | sy = ext[1] & 0x3f; | 
|  | tb = ext[2] & 0x1f; | 
|  | wb = ext[3] & 0x1f; | 
|  | bd = !(ext[4] & 0x40); | 
|  | bm = !(ext[4] & 0x10); | 
|  | bp = !(ext[4] & 0x04); | 
|  | bo = !(ext[5] & 0x80); | 
|  | br = !(ext[5] & 0x40); | 
|  | bb = !(ext[5] & 0x20); | 
|  | bg = !(ext[5] & 0x10); | 
|  | by = !(ext[5] & 0x08); | 
|  | bu = !(ext[5] & 0x01); | 
|  |  | 
|  | if (wdata->state.flags & WIIPROTO_FLAG_MP_ACTIVE) { | 
|  | bu = !(ext[0] & 0x01); | 
|  | sx &= 0x3e; | 
|  | sy &= 0x3e; | 
|  | } | 
|  |  | 
|  | input_report_abs(wdata->extension.input, ABS_X, sx - 0x20); | 
|  | input_report_abs(wdata->extension.input, ABS_Y, sy - 0x20); | 
|  | input_report_abs(wdata->extension.input, ABS_HAT0X, tb); | 
|  | input_report_abs(wdata->extension.input, ABS_HAT1X, wb - 0x10); | 
|  |  | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_guitar_map[WIIMOD_GUITAR_KEY_G], | 
|  | bg); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_guitar_map[WIIMOD_GUITAR_KEY_R], | 
|  | br); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_guitar_map[WIIMOD_GUITAR_KEY_Y], | 
|  | by); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_guitar_map[WIIMOD_GUITAR_KEY_B], | 
|  | bb); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_guitar_map[WIIMOD_GUITAR_KEY_O], | 
|  | bo); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_guitar_map[WIIMOD_GUITAR_KEY_UP], | 
|  | bu); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_guitar_map[WIIMOD_GUITAR_KEY_DOWN], | 
|  | bd); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_guitar_map[WIIMOD_GUITAR_KEY_PLUS], | 
|  | bp); | 
|  | input_report_key(wdata->extension.input, | 
|  | wiimod_guitar_map[WIIMOD_GUITAR_KEY_MINUS], | 
|  | bm); | 
|  |  | 
|  | input_sync(wdata->extension.input); | 
|  | } | 
|  |  | 
|  | static int wiimod_guitar_open(struct input_dev *dev) | 
|  | { | 
|  | struct wiimote_data *wdata = input_get_drvdata(dev); | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wdata->state.flags |= WIIPROTO_FLAG_EXT_USED; | 
|  | wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL); | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void wiimod_guitar_close(struct input_dev *dev) | 
|  | { | 
|  | struct wiimote_data *wdata = input_get_drvdata(dev); | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wdata->state.flags &= ~WIIPROTO_FLAG_EXT_USED; | 
|  | wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL); | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  | } | 
|  |  | 
|  | static int wiimod_guitar_probe(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | int ret, i; | 
|  |  | 
|  | wdata->extension.input = input_allocate_device(); | 
|  | if (!wdata->extension.input) | 
|  | return -ENOMEM; | 
|  |  | 
|  | input_set_drvdata(wdata->extension.input, wdata); | 
|  | wdata->extension.input->open = wiimod_guitar_open; | 
|  | wdata->extension.input->close = wiimod_guitar_close; | 
|  | wdata->extension.input->dev.parent = &wdata->hdev->dev; | 
|  | wdata->extension.input->id.bustype = wdata->hdev->bus; | 
|  | wdata->extension.input->id.vendor = wdata->hdev->vendor; | 
|  | wdata->extension.input->id.product = wdata->hdev->product; | 
|  | wdata->extension.input->id.version = wdata->hdev->version; | 
|  | wdata->extension.input->name = WIIMOTE_NAME " Guitar"; | 
|  |  | 
|  | set_bit(EV_KEY, wdata->extension.input->evbit); | 
|  | for (i = 0; i < WIIMOD_GUITAR_KEY_NUM; ++i) | 
|  | set_bit(wiimod_guitar_map[i], | 
|  | wdata->extension.input->keybit); | 
|  |  | 
|  | set_bit(EV_ABS, wdata->extension.input->evbit); | 
|  | set_bit(ABS_X, wdata->extension.input->absbit); | 
|  | set_bit(ABS_Y, wdata->extension.input->absbit); | 
|  | set_bit(ABS_HAT0X, wdata->extension.input->absbit); | 
|  | set_bit(ABS_HAT1X, wdata->extension.input->absbit); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_X, -32, 31, 1, 1); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_Y, -32, 31, 1, 1); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_HAT0X, 0, 0x1f, 1, 1); | 
|  | input_set_abs_params(wdata->extension.input, | 
|  | ABS_HAT1X, 0, 0x0f, 1, 1); | 
|  |  | 
|  | ret = input_register_device(wdata->extension.input); | 
|  | if (ret) | 
|  | goto err_free; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_free: | 
|  | input_free_device(wdata->extension.input); | 
|  | wdata->extension.input = NULL; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void wiimod_guitar_remove(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | if (!wdata->extension.input) | 
|  | return; | 
|  |  | 
|  | input_unregister_device(wdata->extension.input); | 
|  | wdata->extension.input = NULL; | 
|  | } | 
|  |  | 
|  | static const struct wiimod_ops wiimod_guitar = { | 
|  | .flags = 0, | 
|  | .arg = 0, | 
|  | .probe = wiimod_guitar_probe, | 
|  | .remove = wiimod_guitar_remove, | 
|  | .in_ext = wiimod_guitar_in_ext, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Builtin Motion Plus | 
|  | * This module simply sets the WIIPROTO_FLAG_BUILTIN_MP protocol flag which | 
|  | * disables polling for Motion-Plus. This should be set only for devices which | 
|  | * don't allow MP hotplugging. | 
|  | */ | 
|  |  | 
|  | static int wiimod_builtin_mp_probe(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wdata->state.flags |= WIIPROTO_FLAG_BUILTIN_MP; | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void wiimod_builtin_mp_remove(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wdata->state.flags |= WIIPROTO_FLAG_BUILTIN_MP; | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  | } | 
|  |  | 
|  | static const struct wiimod_ops wiimod_builtin_mp = { | 
|  | .flags = 0, | 
|  | .arg = 0, | 
|  | .probe = wiimod_builtin_mp_probe, | 
|  | .remove = wiimod_builtin_mp_remove, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * No Motion Plus | 
|  | * This module simply sets the WIIPROTO_FLAG_NO_MP protocol flag which | 
|  | * disables motion-plus. This is needed for devices that advertise this but we | 
|  | * don't know how to use it (or whether it is actually present). | 
|  | */ | 
|  |  | 
|  | static int wiimod_no_mp_probe(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wdata->state.flags |= WIIPROTO_FLAG_NO_MP; | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void wiimod_no_mp_remove(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wdata->state.flags |= WIIPROTO_FLAG_NO_MP; | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  | } | 
|  |  | 
|  | static const struct wiimod_ops wiimod_no_mp = { | 
|  | .flags = 0, | 
|  | .arg = 0, | 
|  | .probe = wiimod_no_mp_probe, | 
|  | .remove = wiimod_no_mp_remove, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Motion Plus | 
|  | * The Motion Plus extension provides rotation sensors (gyro) as a small | 
|  | * extension device for Wii Remotes. Many devices have them built-in so | 
|  | * you cannot see them from the outside. | 
|  | * Motion Plus extensions are special because they are on a separate extension | 
|  | * port and allow other extensions to be used simultaneously. This is all | 
|  | * handled by the Wiimote Core so we don't have to deal with it. | 
|  | */ | 
|  |  | 
|  | static void wiimod_mp_in_mp(struct wiimote_data *wdata, const __u8 *ext) | 
|  | { | 
|  | __s32 x, y, z; | 
|  |  | 
|  | /*        |   8    7    6    5    4    3 |  2  |  1  | | 
|  | *   -----+------------------------------+-----+-----+ | 
|  | *    1   |               Yaw Speed <7:0>            | | 
|  | *    2   |              Roll Speed <7:0>            | | 
|  | *    3   |             Pitch Speed <7:0>            | | 
|  | *   -----+------------------------------+-----+-----+ | 
|  | *    4   |       Yaw Speed <13:8>       | Yaw |Pitch| | 
|  | *   -----+------------------------------+-----+-----+ | 
|  | *    5   |      Roll Speed <13:8>       |Roll | Ext | | 
|  | *   -----+------------------------------+-----+-----+ | 
|  | *    6   |     Pitch Speed <13:8>       |  1  |  0  | | 
|  | *   -----+------------------------------+-----+-----+ | 
|  | * The single bits Yaw, Roll, Pitch in the lower right corner specify | 
|  | * whether the wiimote is rotating fast (0) or slow (1). Speed for slow | 
|  | * roation is 8192/440 units / deg/s and for fast rotation 8192/2000 | 
|  | * units / deg/s. To get a linear scale for fast rotation we multiply | 
|  | * by 2000/440 = ~4.5454 and scale both fast and slow by 9 to match the | 
|  | * previous scale reported by this driver. | 
|  | * This leaves a linear scale with 8192*9/440 (~167.564) units / deg/s. | 
|  | * If the wiimote is not rotating the sensor reports 2^13 = 8192. | 
|  | * Ext specifies whether an extension is connected to the motionp. | 
|  | * which is parsed by wiimote-core. | 
|  | */ | 
|  |  | 
|  | x = ext[0]; | 
|  | y = ext[1]; | 
|  | z = ext[2]; | 
|  |  | 
|  | x |= (((__u16)ext[3]) << 6) & 0xff00; | 
|  | y |= (((__u16)ext[4]) << 6) & 0xff00; | 
|  | z |= (((__u16)ext[5]) << 6) & 0xff00; | 
|  |  | 
|  | x -= 8192; | 
|  | y -= 8192; | 
|  | z -= 8192; | 
|  |  | 
|  | if (!(ext[3] & 0x02)) | 
|  | x = (x * 2000 * 9) / 440; | 
|  | else | 
|  | x *= 9; | 
|  | if (!(ext[4] & 0x02)) | 
|  | y = (y * 2000 * 9) / 440; | 
|  | else | 
|  | y *= 9; | 
|  | if (!(ext[3] & 0x01)) | 
|  | z = (z * 2000 * 9) / 440; | 
|  | else | 
|  | z *= 9; | 
|  |  | 
|  | input_report_abs(wdata->mp, ABS_RX, x); | 
|  | input_report_abs(wdata->mp, ABS_RY, y); | 
|  | input_report_abs(wdata->mp, ABS_RZ, z); | 
|  | input_sync(wdata->mp); | 
|  | } | 
|  |  | 
|  | static int wiimod_mp_open(struct input_dev *dev) | 
|  | { | 
|  | struct wiimote_data *wdata = input_get_drvdata(dev); | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wdata->state.flags |= WIIPROTO_FLAG_MP_USED; | 
|  | wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL); | 
|  | __wiimote_schedule(wdata); | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void wiimod_mp_close(struct input_dev *dev) | 
|  | { | 
|  | struct wiimote_data *wdata = input_get_drvdata(dev); | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wdata->state.flags &= ~WIIPROTO_FLAG_MP_USED; | 
|  | wiiproto_req_drm(wdata, WIIPROTO_REQ_NULL); | 
|  | __wiimote_schedule(wdata); | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  | } | 
|  |  | 
|  | static int wiimod_mp_probe(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | wdata->mp = input_allocate_device(); | 
|  | if (!wdata->mp) | 
|  | return -ENOMEM; | 
|  |  | 
|  | input_set_drvdata(wdata->mp, wdata); | 
|  | wdata->mp->open = wiimod_mp_open; | 
|  | wdata->mp->close = wiimod_mp_close; | 
|  | wdata->mp->dev.parent = &wdata->hdev->dev; | 
|  | wdata->mp->id.bustype = wdata->hdev->bus; | 
|  | wdata->mp->id.vendor = wdata->hdev->vendor; | 
|  | wdata->mp->id.product = wdata->hdev->product; | 
|  | wdata->mp->id.version = wdata->hdev->version; | 
|  | wdata->mp->name = WIIMOTE_NAME " Motion Plus"; | 
|  |  | 
|  | set_bit(EV_ABS, wdata->mp->evbit); | 
|  | set_bit(ABS_RX, wdata->mp->absbit); | 
|  | set_bit(ABS_RY, wdata->mp->absbit); | 
|  | set_bit(ABS_RZ, wdata->mp->absbit); | 
|  | input_set_abs_params(wdata->mp, | 
|  | ABS_RX, -16000, 16000, 4, 8); | 
|  | input_set_abs_params(wdata->mp, | 
|  | ABS_RY, -16000, 16000, 4, 8); | 
|  | input_set_abs_params(wdata->mp, | 
|  | ABS_RZ, -16000, 16000, 4, 8); | 
|  |  | 
|  | ret = input_register_device(wdata->mp); | 
|  | if (ret) | 
|  | goto err_free; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_free: | 
|  | input_free_device(wdata->mp); | 
|  | wdata->mp = NULL; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void wiimod_mp_remove(const struct wiimod_ops *ops, | 
|  | struct wiimote_data *wdata) | 
|  | { | 
|  | if (!wdata->mp) | 
|  | return; | 
|  |  | 
|  | input_unregister_device(wdata->mp); | 
|  | wdata->mp = NULL; | 
|  | } | 
|  |  | 
|  | const struct wiimod_ops wiimod_mp = { | 
|  | .flags = 0, | 
|  | .arg = 0, | 
|  | .probe = wiimod_mp_probe, | 
|  | .remove = wiimod_mp_remove, | 
|  | .in_mp = wiimod_mp_in_mp, | 
|  | }; | 
|  |  | 
|  | /* module table */ | 
|  |  | 
|  | static const struct wiimod_ops wiimod_dummy; | 
|  |  | 
|  | const struct wiimod_ops *wiimod_table[WIIMOD_NUM] = { | 
|  | [WIIMOD_KEYS] = &wiimod_keys, | 
|  | [WIIMOD_RUMBLE] = &wiimod_rumble, | 
|  | [WIIMOD_BATTERY] = &wiimod_battery, | 
|  | [WIIMOD_LED1] = &wiimod_leds[0], | 
|  | [WIIMOD_LED2] = &wiimod_leds[1], | 
|  | [WIIMOD_LED3] = &wiimod_leds[2], | 
|  | [WIIMOD_LED4] = &wiimod_leds[3], | 
|  | [WIIMOD_ACCEL] = &wiimod_accel, | 
|  | [WIIMOD_IR] = &wiimod_ir, | 
|  | [WIIMOD_BUILTIN_MP] = &wiimod_builtin_mp, | 
|  | [WIIMOD_NO_MP] = &wiimod_no_mp, | 
|  | }; | 
|  |  | 
|  | const struct wiimod_ops *wiimod_ext_table[WIIMOTE_EXT_NUM] = { | 
|  | [WIIMOTE_EXT_NONE] = &wiimod_dummy, | 
|  | [WIIMOTE_EXT_UNKNOWN] = &wiimod_dummy, | 
|  | [WIIMOTE_EXT_NUNCHUK] = &wiimod_nunchuk, | 
|  | [WIIMOTE_EXT_CLASSIC_CONTROLLER] = &wiimod_classic, | 
|  | [WIIMOTE_EXT_BALANCE_BOARD] = &wiimod_bboard, | 
|  | [WIIMOTE_EXT_PRO_CONTROLLER] = &wiimod_pro, | 
|  | [WIIMOTE_EXT_DRUMS] = &wiimod_drums, | 
|  | [WIIMOTE_EXT_GUITAR] = &wiimod_guitar, | 
|  | }; |