| // SPDX-License-Identifier: GPL-2.0-or-later | 
 | /* | 
 |  *  battery.c - ACPI Battery Driver (Revision: 2.0) | 
 |  * | 
 |  *  Copyright (C) 2007 Alexey Starikovskiy <astarikovskiy@suse.de> | 
 |  *  Copyright (C) 2004-2007 Vladimir Lebedev <vladimir.p.lebedev@intel.com> | 
 |  *  Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> | 
 |  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> | 
 |  */ | 
 |  | 
 | #define pr_fmt(fmt) "ACPI: battery: " fmt | 
 |  | 
 | #include <linux/async.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/dmi.h> | 
 | #include <linux/jiffies.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/list.h> | 
 | #include <linux/module.h> | 
 | #include <linux/mutex.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/suspend.h> | 
 | #include <linux/types.h> | 
 |  | 
 | #include <asm/unaligned.h> | 
 |  | 
 | #include <linux/acpi.h> | 
 | #include <linux/power_supply.h> | 
 |  | 
 | #include <acpi/battery.h> | 
 |  | 
 | #define ACPI_BATTERY_VALUE_UNKNOWN 0xFFFFFFFF | 
 | #define ACPI_BATTERY_CAPACITY_VALID(capacity) \ | 
 | 	((capacity) != 0 && (capacity) != ACPI_BATTERY_VALUE_UNKNOWN) | 
 |  | 
 | #define ACPI_BATTERY_DEVICE_NAME	"Battery" | 
 |  | 
 | /* Battery power unit: 0 means mW, 1 means mA */ | 
 | #define ACPI_BATTERY_POWER_UNIT_MA	1 | 
 |  | 
 | #define ACPI_BATTERY_STATE_DISCHARGING	0x1 | 
 | #define ACPI_BATTERY_STATE_CHARGING	0x2 | 
 | #define ACPI_BATTERY_STATE_CRITICAL	0x4 | 
 |  | 
 | MODULE_AUTHOR("Paul Diefenbaugh"); | 
 | MODULE_AUTHOR("Alexey Starikovskiy <astarikovskiy@suse.de>"); | 
 | MODULE_DESCRIPTION("ACPI Battery Driver"); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 | static async_cookie_t async_cookie; | 
 | static bool battery_driver_registered; | 
 | static int battery_bix_broken_package; | 
 | static int battery_notification_delay_ms; | 
 | static int battery_ac_is_broken; | 
 | static int battery_check_pmic = 1; | 
 | static int battery_quirk_notcharging; | 
 | static unsigned int cache_time = 1000; | 
 | module_param(cache_time, uint, 0644); | 
 | MODULE_PARM_DESC(cache_time, "cache time in milliseconds"); | 
 |  | 
 | static const struct acpi_device_id battery_device_ids[] = { | 
 | 	{"PNP0C0A", 0}, | 
 |  | 
 | 	/* Microsoft Surface Go 3 */ | 
 | 	{"MSHW0146", 0}, | 
 |  | 
 | 	{"", 0}, | 
 | }; | 
 |  | 
 | MODULE_DEVICE_TABLE(acpi, battery_device_ids); | 
 |  | 
 | /* Lists of PMIC ACPI HIDs with an (often better) native battery driver */ | 
 | static const char * const acpi_battery_blacklist[] = { | 
 | 	"INT33F4", /* X-Powers AXP288 PMIC */ | 
 | }; | 
 |  | 
 | enum { | 
 | 	ACPI_BATTERY_ALARM_PRESENT, | 
 | 	ACPI_BATTERY_XINFO_PRESENT, | 
 | 	ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, | 
 | 	/* On Lenovo Thinkpad models from 2010 and 2011, the power unit | 
 | 	 * switches between mWh and mAh depending on whether the system | 
 | 	 * is running on battery or not.  When mAh is the unit, most | 
 | 	 * reported values are incorrect and need to be adjusted by | 
 | 	 * 10000/design_voltage.  Verified on x201, t410, t410s, and x220. | 
 | 	 * Pre-2010 and 2012 models appear to always report in mWh and | 
 | 	 * are thus unaffected (tested with t42, t61, t500, x200, x300, | 
 | 	 * and x230).  Also, in mid-2012 Lenovo issued a BIOS update for | 
 | 	 *  the 2011 models that fixes the issue (tested on x220 with a | 
 | 	 * post-1.29 BIOS), but as of Nov. 2012, no such update is | 
 | 	 * available for the 2010 models. | 
 | 	 */ | 
 | 	ACPI_BATTERY_QUIRK_THINKPAD_MAH, | 
 | 	/* for batteries reporting current capacity with design capacity | 
 | 	 * on a full charge, but showing degradation in full charge cap. | 
 | 	 */ | 
 | 	ACPI_BATTERY_QUIRK_DEGRADED_FULL_CHARGE, | 
 | }; | 
 |  | 
 | struct acpi_battery { | 
 | 	struct mutex lock; | 
 | 	struct mutex sysfs_lock; | 
 | 	struct power_supply *bat; | 
 | 	struct power_supply_desc bat_desc; | 
 | 	struct acpi_device *device; | 
 | 	struct notifier_block pm_nb; | 
 | 	struct list_head list; | 
 | 	unsigned long update_time; | 
 | 	int revision; | 
 | 	int rate_now; | 
 | 	int capacity_now; | 
 | 	int voltage_now; | 
 | 	int design_capacity; | 
 | 	int full_charge_capacity; | 
 | 	int technology; | 
 | 	int design_voltage; | 
 | 	int design_capacity_warning; | 
 | 	int design_capacity_low; | 
 | 	int cycle_count; | 
 | 	int measurement_accuracy; | 
 | 	int max_sampling_time; | 
 | 	int min_sampling_time; | 
 | 	int max_averaging_interval; | 
 | 	int min_averaging_interval; | 
 | 	int capacity_granularity_1; | 
 | 	int capacity_granularity_2; | 
 | 	int alarm; | 
 | 	char model_number[32]; | 
 | 	char serial_number[32]; | 
 | 	char type[32]; | 
 | 	char oem_info[32]; | 
 | 	int state; | 
 | 	int power_unit; | 
 | 	unsigned long flags; | 
 | }; | 
 |  | 
 | #define to_acpi_battery(x) power_supply_get_drvdata(x) | 
 |  | 
 | static inline int acpi_battery_present(struct acpi_battery *battery) | 
 | { | 
 | 	return battery->device->status.battery_present; | 
 | } | 
 |  | 
 | static int acpi_battery_technology(struct acpi_battery *battery) | 
 | { | 
 | 	if (!strcasecmp("NiCd", battery->type)) | 
 | 		return POWER_SUPPLY_TECHNOLOGY_NiCd; | 
 | 	if (!strcasecmp("NiMH", battery->type)) | 
 | 		return POWER_SUPPLY_TECHNOLOGY_NiMH; | 
 | 	if (!strcasecmp("LION", battery->type)) | 
 | 		return POWER_SUPPLY_TECHNOLOGY_LION; | 
 | 	if (!strncasecmp("LI-ION", battery->type, 6)) | 
 | 		return POWER_SUPPLY_TECHNOLOGY_LION; | 
 | 	if (!strcasecmp("LiP", battery->type)) | 
 | 		return POWER_SUPPLY_TECHNOLOGY_LIPO; | 
 | 	return POWER_SUPPLY_TECHNOLOGY_UNKNOWN; | 
 | } | 
 |  | 
 | static int acpi_battery_get_state(struct acpi_battery *battery); | 
 |  | 
 | static int acpi_battery_is_charged(struct acpi_battery *battery) | 
 | { | 
 | 	/* charging, discharging or critical low */ | 
 | 	if (battery->state != 0) | 
 | 		return 0; | 
 |  | 
 | 	/* battery not reporting charge */ | 
 | 	if (battery->capacity_now == ACPI_BATTERY_VALUE_UNKNOWN || | 
 | 	    battery->capacity_now == 0) | 
 | 		return 0; | 
 |  | 
 | 	/* good batteries update full_charge as the batteries degrade */ | 
 | 	if (battery->full_charge_capacity == battery->capacity_now) | 
 | 		return 1; | 
 |  | 
 | 	/* fallback to using design values for broken batteries */ | 
 | 	if (battery->design_capacity <= battery->capacity_now) | 
 | 		return 1; | 
 |  | 
 | 	/* we don't do any sort of metric based on percentages */ | 
 | 	return 0; | 
 | } | 
 |  | 
 | static bool acpi_battery_is_degraded(struct acpi_battery *battery) | 
 | { | 
 | 	return ACPI_BATTERY_CAPACITY_VALID(battery->full_charge_capacity) && | 
 | 		ACPI_BATTERY_CAPACITY_VALID(battery->design_capacity) && | 
 | 		battery->full_charge_capacity < battery->design_capacity; | 
 | } | 
 |  | 
 | static int acpi_battery_handle_discharging(struct acpi_battery *battery) | 
 | { | 
 | 	/* | 
 | 	 * Some devices wrongly report discharging if the battery's charge level | 
 | 	 * was above the device's start charging threshold atm the AC adapter | 
 | 	 * was plugged in and the device thus did not start a new charge cycle. | 
 | 	 */ | 
 | 	if ((battery_ac_is_broken || power_supply_is_system_supplied()) && | 
 | 	    battery->rate_now == 0) | 
 | 		return POWER_SUPPLY_STATUS_NOT_CHARGING; | 
 |  | 
 | 	return POWER_SUPPLY_STATUS_DISCHARGING; | 
 | } | 
 |  | 
 | static int acpi_battery_get_property(struct power_supply *psy, | 
 | 				     enum power_supply_property psp, | 
 | 				     union power_supply_propval *val) | 
 | { | 
 | 	int full_capacity = ACPI_BATTERY_VALUE_UNKNOWN, ret = 0; | 
 | 	struct acpi_battery *battery = to_acpi_battery(psy); | 
 |  | 
 | 	if (acpi_battery_present(battery)) { | 
 | 		/* run battery update only if it is present */ | 
 | 		acpi_battery_get_state(battery); | 
 | 	} else if (psp != POWER_SUPPLY_PROP_PRESENT) | 
 | 		return -ENODEV; | 
 | 	switch (psp) { | 
 | 	case POWER_SUPPLY_PROP_STATUS: | 
 | 		if (battery->state & ACPI_BATTERY_STATE_DISCHARGING) | 
 | 			val->intval = acpi_battery_handle_discharging(battery); | 
 | 		else if (battery->state & ACPI_BATTERY_STATE_CHARGING) | 
 | 			val->intval = POWER_SUPPLY_STATUS_CHARGING; | 
 | 		else if (acpi_battery_is_charged(battery)) | 
 | 			val->intval = POWER_SUPPLY_STATUS_FULL; | 
 | 		else if (battery_quirk_notcharging) | 
 | 			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; | 
 | 		else | 
 | 			val->intval = POWER_SUPPLY_STATUS_UNKNOWN; | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_PRESENT: | 
 | 		val->intval = acpi_battery_present(battery); | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_TECHNOLOGY: | 
 | 		val->intval = acpi_battery_technology(battery); | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_CYCLE_COUNT: | 
 | 		val->intval = battery->cycle_count; | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: | 
 | 		if (battery->design_voltage == ACPI_BATTERY_VALUE_UNKNOWN) | 
 | 			ret = -ENODEV; | 
 | 		else | 
 | 			val->intval = battery->design_voltage * 1000; | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_VOLTAGE_NOW: | 
 | 		if (battery->voltage_now == ACPI_BATTERY_VALUE_UNKNOWN) | 
 | 			ret = -ENODEV; | 
 | 		else | 
 | 			val->intval = battery->voltage_now * 1000; | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_CURRENT_NOW: | 
 | 	case POWER_SUPPLY_PROP_POWER_NOW: | 
 | 		if (battery->rate_now == ACPI_BATTERY_VALUE_UNKNOWN) | 
 | 			ret = -ENODEV; | 
 | 		else | 
 | 			val->intval = battery->rate_now * 1000; | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: | 
 | 	case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: | 
 | 		if (!ACPI_BATTERY_CAPACITY_VALID(battery->design_capacity)) | 
 | 			ret = -ENODEV; | 
 | 		else | 
 | 			val->intval = battery->design_capacity * 1000; | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_CHARGE_FULL: | 
 | 	case POWER_SUPPLY_PROP_ENERGY_FULL: | 
 | 		if (!ACPI_BATTERY_CAPACITY_VALID(battery->full_charge_capacity)) | 
 | 			ret = -ENODEV; | 
 | 		else | 
 | 			val->intval = battery->full_charge_capacity * 1000; | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_CHARGE_NOW: | 
 | 	case POWER_SUPPLY_PROP_ENERGY_NOW: | 
 | 		if (battery->capacity_now == ACPI_BATTERY_VALUE_UNKNOWN) | 
 | 			ret = -ENODEV; | 
 | 		else | 
 | 			val->intval = battery->capacity_now * 1000; | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_CAPACITY: | 
 | 		if (ACPI_BATTERY_CAPACITY_VALID(battery->full_charge_capacity)) | 
 | 			full_capacity = battery->full_charge_capacity; | 
 | 		else if (ACPI_BATTERY_CAPACITY_VALID(battery->design_capacity)) | 
 | 			full_capacity = battery->design_capacity; | 
 |  | 
 | 		if (battery->capacity_now == ACPI_BATTERY_VALUE_UNKNOWN || | 
 | 		    full_capacity == ACPI_BATTERY_VALUE_UNKNOWN) | 
 | 			ret = -ENODEV; | 
 | 		else | 
 | 			val->intval = battery->capacity_now * 100/ | 
 | 					full_capacity; | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_CAPACITY_LEVEL: | 
 | 		if (battery->state & ACPI_BATTERY_STATE_CRITICAL) | 
 | 			val->intval = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; | 
 | 		else if (test_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags) && | 
 | 			(battery->capacity_now <= battery->alarm)) | 
 | 			val->intval = POWER_SUPPLY_CAPACITY_LEVEL_LOW; | 
 | 		else if (acpi_battery_is_charged(battery)) | 
 | 			val->intval = POWER_SUPPLY_CAPACITY_LEVEL_FULL; | 
 | 		else | 
 | 			val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_MODEL_NAME: | 
 | 		val->strval = battery->model_number; | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_MANUFACTURER: | 
 | 		val->strval = battery->oem_info; | 
 | 		break; | 
 | 	case POWER_SUPPLY_PROP_SERIAL_NUMBER: | 
 | 		val->strval = battery->serial_number; | 
 | 		break; | 
 | 	default: | 
 | 		ret = -EINVAL; | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 | static enum power_supply_property charge_battery_props[] = { | 
 | 	POWER_SUPPLY_PROP_STATUS, | 
 | 	POWER_SUPPLY_PROP_PRESENT, | 
 | 	POWER_SUPPLY_PROP_TECHNOLOGY, | 
 | 	POWER_SUPPLY_PROP_CYCLE_COUNT, | 
 | 	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, | 
 | 	POWER_SUPPLY_PROP_VOLTAGE_NOW, | 
 | 	POWER_SUPPLY_PROP_CURRENT_NOW, | 
 | 	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, | 
 | 	POWER_SUPPLY_PROP_CHARGE_FULL, | 
 | 	POWER_SUPPLY_PROP_CHARGE_NOW, | 
 | 	POWER_SUPPLY_PROP_CAPACITY, | 
 | 	POWER_SUPPLY_PROP_CAPACITY_LEVEL, | 
 | 	POWER_SUPPLY_PROP_MODEL_NAME, | 
 | 	POWER_SUPPLY_PROP_MANUFACTURER, | 
 | 	POWER_SUPPLY_PROP_SERIAL_NUMBER, | 
 | }; | 
 |  | 
 | static enum power_supply_property charge_battery_full_cap_broken_props[] = { | 
 | 	POWER_SUPPLY_PROP_STATUS, | 
 | 	POWER_SUPPLY_PROP_PRESENT, | 
 | 	POWER_SUPPLY_PROP_TECHNOLOGY, | 
 | 	POWER_SUPPLY_PROP_CYCLE_COUNT, | 
 | 	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, | 
 | 	POWER_SUPPLY_PROP_VOLTAGE_NOW, | 
 | 	POWER_SUPPLY_PROP_CURRENT_NOW, | 
 | 	POWER_SUPPLY_PROP_CHARGE_NOW, | 
 | 	POWER_SUPPLY_PROP_MODEL_NAME, | 
 | 	POWER_SUPPLY_PROP_MANUFACTURER, | 
 | 	POWER_SUPPLY_PROP_SERIAL_NUMBER, | 
 | }; | 
 |  | 
 | static enum power_supply_property energy_battery_props[] = { | 
 | 	POWER_SUPPLY_PROP_STATUS, | 
 | 	POWER_SUPPLY_PROP_PRESENT, | 
 | 	POWER_SUPPLY_PROP_TECHNOLOGY, | 
 | 	POWER_SUPPLY_PROP_CYCLE_COUNT, | 
 | 	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, | 
 | 	POWER_SUPPLY_PROP_VOLTAGE_NOW, | 
 | 	POWER_SUPPLY_PROP_POWER_NOW, | 
 | 	POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, | 
 | 	POWER_SUPPLY_PROP_ENERGY_FULL, | 
 | 	POWER_SUPPLY_PROP_ENERGY_NOW, | 
 | 	POWER_SUPPLY_PROP_CAPACITY, | 
 | 	POWER_SUPPLY_PROP_CAPACITY_LEVEL, | 
 | 	POWER_SUPPLY_PROP_MODEL_NAME, | 
 | 	POWER_SUPPLY_PROP_MANUFACTURER, | 
 | 	POWER_SUPPLY_PROP_SERIAL_NUMBER, | 
 | }; | 
 |  | 
 | static enum power_supply_property energy_battery_full_cap_broken_props[] = { | 
 | 	POWER_SUPPLY_PROP_STATUS, | 
 | 	POWER_SUPPLY_PROP_PRESENT, | 
 | 	POWER_SUPPLY_PROP_TECHNOLOGY, | 
 | 	POWER_SUPPLY_PROP_CYCLE_COUNT, | 
 | 	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, | 
 | 	POWER_SUPPLY_PROP_VOLTAGE_NOW, | 
 | 	POWER_SUPPLY_PROP_POWER_NOW, | 
 | 	POWER_SUPPLY_PROP_ENERGY_NOW, | 
 | 	POWER_SUPPLY_PROP_MODEL_NAME, | 
 | 	POWER_SUPPLY_PROP_MANUFACTURER, | 
 | 	POWER_SUPPLY_PROP_SERIAL_NUMBER, | 
 | }; | 
 |  | 
 | /* Battery Management */ | 
 | struct acpi_offsets { | 
 | 	size_t offset;		/* offset inside struct acpi_sbs_battery */ | 
 | 	u8 mode;		/* int or string? */ | 
 | }; | 
 |  | 
 | static const struct acpi_offsets state_offsets[] = { | 
 | 	{offsetof(struct acpi_battery, state), 0}, | 
 | 	{offsetof(struct acpi_battery, rate_now), 0}, | 
 | 	{offsetof(struct acpi_battery, capacity_now), 0}, | 
 | 	{offsetof(struct acpi_battery, voltage_now), 0}, | 
 | }; | 
 |  | 
 | static const struct acpi_offsets info_offsets[] = { | 
 | 	{offsetof(struct acpi_battery, power_unit), 0}, | 
 | 	{offsetof(struct acpi_battery, design_capacity), 0}, | 
 | 	{offsetof(struct acpi_battery, full_charge_capacity), 0}, | 
 | 	{offsetof(struct acpi_battery, technology), 0}, | 
 | 	{offsetof(struct acpi_battery, design_voltage), 0}, | 
 | 	{offsetof(struct acpi_battery, design_capacity_warning), 0}, | 
 | 	{offsetof(struct acpi_battery, design_capacity_low), 0}, | 
 | 	{offsetof(struct acpi_battery, capacity_granularity_1), 0}, | 
 | 	{offsetof(struct acpi_battery, capacity_granularity_2), 0}, | 
 | 	{offsetof(struct acpi_battery, model_number), 1}, | 
 | 	{offsetof(struct acpi_battery, serial_number), 1}, | 
 | 	{offsetof(struct acpi_battery, type), 1}, | 
 | 	{offsetof(struct acpi_battery, oem_info), 1}, | 
 | }; | 
 |  | 
 | static const struct acpi_offsets extended_info_offsets[] = { | 
 | 	{offsetof(struct acpi_battery, revision), 0}, | 
 | 	{offsetof(struct acpi_battery, power_unit), 0}, | 
 | 	{offsetof(struct acpi_battery, design_capacity), 0}, | 
 | 	{offsetof(struct acpi_battery, full_charge_capacity), 0}, | 
 | 	{offsetof(struct acpi_battery, technology), 0}, | 
 | 	{offsetof(struct acpi_battery, design_voltage), 0}, | 
 | 	{offsetof(struct acpi_battery, design_capacity_warning), 0}, | 
 | 	{offsetof(struct acpi_battery, design_capacity_low), 0}, | 
 | 	{offsetof(struct acpi_battery, cycle_count), 0}, | 
 | 	{offsetof(struct acpi_battery, measurement_accuracy), 0}, | 
 | 	{offsetof(struct acpi_battery, max_sampling_time), 0}, | 
 | 	{offsetof(struct acpi_battery, min_sampling_time), 0}, | 
 | 	{offsetof(struct acpi_battery, max_averaging_interval), 0}, | 
 | 	{offsetof(struct acpi_battery, min_averaging_interval), 0}, | 
 | 	{offsetof(struct acpi_battery, capacity_granularity_1), 0}, | 
 | 	{offsetof(struct acpi_battery, capacity_granularity_2), 0}, | 
 | 	{offsetof(struct acpi_battery, model_number), 1}, | 
 | 	{offsetof(struct acpi_battery, serial_number), 1}, | 
 | 	{offsetof(struct acpi_battery, type), 1}, | 
 | 	{offsetof(struct acpi_battery, oem_info), 1}, | 
 | }; | 
 |  | 
 | static int extract_package(struct acpi_battery *battery, | 
 | 			   union acpi_object *package, | 
 | 			   const struct acpi_offsets *offsets, int num) | 
 | { | 
 | 	int i; | 
 | 	union acpi_object *element; | 
 |  | 
 | 	if (package->type != ACPI_TYPE_PACKAGE) | 
 | 		return -EFAULT; | 
 | 	for (i = 0; i < num; ++i) { | 
 | 		if (package->package.count <= i) | 
 | 			return -EFAULT; | 
 | 		element = &package->package.elements[i]; | 
 | 		if (offsets[i].mode) { | 
 | 			u8 *ptr = (u8 *)battery + offsets[i].offset; | 
 |  | 
 | 			if (element->type == ACPI_TYPE_STRING || | 
 | 			    element->type == ACPI_TYPE_BUFFER) | 
 | 				strscpy(ptr, element->string.pointer, 32); | 
 | 			else if (element->type == ACPI_TYPE_INTEGER) { | 
 | 				strncpy(ptr, (u8 *)&element->integer.value, | 
 | 					sizeof(u64)); | 
 | 				ptr[sizeof(u64)] = 0; | 
 | 			} else | 
 | 				*ptr = 0; /* don't have value */ | 
 | 		} else { | 
 | 			int *x = (int *)((u8 *)battery + offsets[i].offset); | 
 | 			*x = (element->type == ACPI_TYPE_INTEGER) ? | 
 | 				element->integer.value : -1; | 
 | 		} | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int acpi_battery_get_status(struct acpi_battery *battery) | 
 | { | 
 | 	if (acpi_bus_get_status(battery->device)) { | 
 | 		acpi_handle_info(battery->device->handle, | 
 | 				 "_STA evaluation failed\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | static int extract_battery_info(const int use_bix, | 
 | 			 struct acpi_battery *battery, | 
 | 			 const struct acpi_buffer *buffer) | 
 | { | 
 | 	int result = -EFAULT; | 
 |  | 
 | 	if (use_bix && battery_bix_broken_package) | 
 | 		result = extract_package(battery, buffer->pointer, | 
 | 				extended_info_offsets + 1, | 
 | 				ARRAY_SIZE(extended_info_offsets) - 1); | 
 | 	else if (use_bix) | 
 | 		result = extract_package(battery, buffer->pointer, | 
 | 				extended_info_offsets, | 
 | 				ARRAY_SIZE(extended_info_offsets)); | 
 | 	else | 
 | 		result = extract_package(battery, buffer->pointer, | 
 | 				info_offsets, ARRAY_SIZE(info_offsets)); | 
 | 	if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags)) | 
 | 		battery->full_charge_capacity = battery->design_capacity; | 
 | 	if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags) && | 
 | 	    battery->power_unit && battery->design_voltage) { | 
 | 		battery->design_capacity = battery->design_capacity * | 
 | 		    10000 / battery->design_voltage; | 
 | 		battery->full_charge_capacity = battery->full_charge_capacity * | 
 | 		    10000 / battery->design_voltage; | 
 | 		battery->design_capacity_warning = | 
 | 		    battery->design_capacity_warning * | 
 | 		    10000 / battery->design_voltage; | 
 | 		/* Curiously, design_capacity_low, unlike the rest of them, | 
 | 		 *  is correct. | 
 | 		 */ | 
 | 		/* capacity_granularity_* equal 1 on the systems tested, so | 
 | 		 * it's impossible to tell if they would need an adjustment | 
 | 		 * or not if their values were higher. | 
 | 		 */ | 
 | 	} | 
 | 	if (test_bit(ACPI_BATTERY_QUIRK_DEGRADED_FULL_CHARGE, &battery->flags) && | 
 | 	    battery->capacity_now > battery->full_charge_capacity) | 
 | 		battery->capacity_now = battery->full_charge_capacity; | 
 |  | 
 | 	return result; | 
 | } | 
 |  | 
 | static int acpi_battery_get_info(struct acpi_battery *battery) | 
 | { | 
 | 	const int xinfo = test_bit(ACPI_BATTERY_XINFO_PRESENT, &battery->flags); | 
 | 	int use_bix; | 
 | 	int result = -ENODEV; | 
 |  | 
 | 	if (!acpi_battery_present(battery)) | 
 | 		return 0; | 
 |  | 
 |  | 
 | 	for (use_bix = xinfo ? 1 : 0; use_bix >= 0; use_bix--) { | 
 | 		struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; | 
 | 		acpi_status status = AE_ERROR; | 
 |  | 
 | 		mutex_lock(&battery->lock); | 
 | 		status = acpi_evaluate_object(battery->device->handle, | 
 | 					      use_bix ? "_BIX":"_BIF", | 
 | 					      NULL, &buffer); | 
 | 		mutex_unlock(&battery->lock); | 
 |  | 
 | 		if (ACPI_FAILURE(status)) { | 
 | 			acpi_handle_info(battery->device->handle, | 
 | 					 "%s evaluation failed: %s\n", | 
 | 					 use_bix ? "_BIX":"_BIF", | 
 | 					 acpi_format_exception(status)); | 
 | 		} else { | 
 | 			result = extract_battery_info(use_bix, | 
 | 						      battery, | 
 | 						      &buffer); | 
 |  | 
 | 			kfree(buffer.pointer); | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (!result && !use_bix && xinfo) | 
 | 		pr_warn(FW_BUG "The _BIX method is broken, using _BIF.\n"); | 
 |  | 
 | 	return result; | 
 | } | 
 |  | 
 | static int acpi_battery_get_state(struct acpi_battery *battery) | 
 | { | 
 | 	int result = 0; | 
 | 	acpi_status status = 0; | 
 | 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; | 
 |  | 
 | 	if (!acpi_battery_present(battery)) | 
 | 		return 0; | 
 |  | 
 | 	if (battery->update_time && | 
 | 	    time_before(jiffies, battery->update_time + | 
 | 			msecs_to_jiffies(cache_time))) | 
 | 		return 0; | 
 |  | 
 | 	mutex_lock(&battery->lock); | 
 | 	status = acpi_evaluate_object(battery->device->handle, "_BST", | 
 | 				      NULL, &buffer); | 
 | 	mutex_unlock(&battery->lock); | 
 |  | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		acpi_handle_info(battery->device->handle, | 
 | 				 "_BST evaluation failed: %s", | 
 | 				 acpi_format_exception(status)); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	result = extract_package(battery, buffer.pointer, | 
 | 				 state_offsets, ARRAY_SIZE(state_offsets)); | 
 | 	battery->update_time = jiffies; | 
 | 	kfree(buffer.pointer); | 
 |  | 
 | 	/* For buggy DSDTs that report negative 16-bit values for either | 
 | 	 * charging or discharging current and/or report 0 as 65536 | 
 | 	 * due to bad math. | 
 | 	 */ | 
 | 	if (battery->power_unit == ACPI_BATTERY_POWER_UNIT_MA && | 
 | 		battery->rate_now != ACPI_BATTERY_VALUE_UNKNOWN && | 
 | 		(s16)(battery->rate_now) < 0) { | 
 | 		battery->rate_now = abs((s16)battery->rate_now); | 
 | 		pr_warn_once(FW_BUG "(dis)charge rate invalid.\n"); | 
 | 	} | 
 |  | 
 | 	if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags) | 
 | 	    && battery->capacity_now >= 0 && battery->capacity_now <= 100) | 
 | 		battery->capacity_now = (battery->capacity_now * | 
 | 				battery->full_charge_capacity) / 100; | 
 | 	if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags) && | 
 | 	    battery->power_unit && battery->design_voltage) { | 
 | 		battery->capacity_now = battery->capacity_now * | 
 | 		    10000 / battery->design_voltage; | 
 | 	} | 
 | 	if (test_bit(ACPI_BATTERY_QUIRK_DEGRADED_FULL_CHARGE, &battery->flags) && | 
 | 	    battery->capacity_now > battery->full_charge_capacity) | 
 | 		battery->capacity_now = battery->full_charge_capacity; | 
 |  | 
 | 	return result; | 
 | } | 
 |  | 
 | static int acpi_battery_set_alarm(struct acpi_battery *battery) | 
 | { | 
 | 	acpi_status status = 0; | 
 |  | 
 | 	if (!acpi_battery_present(battery) || | 
 | 	    !test_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	mutex_lock(&battery->lock); | 
 | 	status = acpi_execute_simple_method(battery->device->handle, "_BTP", | 
 | 					    battery->alarm); | 
 | 	mutex_unlock(&battery->lock); | 
 |  | 
 | 	if (ACPI_FAILURE(status)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	acpi_handle_debug(battery->device->handle, "Alarm set to %d\n", | 
 | 			  battery->alarm); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int acpi_battery_init_alarm(struct acpi_battery *battery) | 
 | { | 
 | 	/* See if alarms are supported, and if so, set default */ | 
 | 	if (!acpi_has_method(battery->device->handle, "_BTP")) { | 
 | 		clear_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags); | 
 | 		return 0; | 
 | 	} | 
 | 	set_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags); | 
 | 	if (!battery->alarm) | 
 | 		battery->alarm = battery->design_capacity_warning; | 
 | 	return acpi_battery_set_alarm(battery); | 
 | } | 
 |  | 
 | static ssize_t acpi_battery_alarm_show(struct device *dev, | 
 | 					struct device_attribute *attr, | 
 | 					char *buf) | 
 | { | 
 | 	struct acpi_battery *battery = to_acpi_battery(dev_get_drvdata(dev)); | 
 |  | 
 | 	return sprintf(buf, "%d\n", battery->alarm * 1000); | 
 | } | 
 |  | 
 | static ssize_t acpi_battery_alarm_store(struct device *dev, | 
 | 					struct device_attribute *attr, | 
 | 					const char *buf, size_t count) | 
 | { | 
 | 	unsigned long x; | 
 | 	struct acpi_battery *battery = to_acpi_battery(dev_get_drvdata(dev)); | 
 |  | 
 | 	if (sscanf(buf, "%lu\n", &x) == 1) | 
 | 		battery->alarm = x/1000; | 
 | 	if (acpi_battery_present(battery)) | 
 | 		acpi_battery_set_alarm(battery); | 
 | 	return count; | 
 | } | 
 |  | 
 | static const struct device_attribute alarm_attr = { | 
 | 	.attr = {.name = "alarm", .mode = 0644}, | 
 | 	.show = acpi_battery_alarm_show, | 
 | 	.store = acpi_battery_alarm_store, | 
 | }; | 
 |  | 
 | /* | 
 |  * The Battery Hooking API | 
 |  * | 
 |  * This API is used inside other drivers that need to expose | 
 |  * platform-specific behaviour within the generic driver in a | 
 |  * generic way. | 
 |  * | 
 |  */ | 
 |  | 
 | static LIST_HEAD(acpi_battery_list); | 
 | static LIST_HEAD(battery_hook_list); | 
 | static DEFINE_MUTEX(hook_mutex); | 
 |  | 
 | static void __battery_hook_unregister(struct acpi_battery_hook *hook, int lock) | 
 | { | 
 | 	struct acpi_battery *battery; | 
 | 	/* | 
 | 	 * In order to remove a hook, we first need to | 
 | 	 * de-register all the batteries that are registered. | 
 | 	 */ | 
 | 	if (lock) | 
 | 		mutex_lock(&hook_mutex); | 
 | 	list_for_each_entry(battery, &acpi_battery_list, list) { | 
 | 		hook->remove_battery(battery->bat); | 
 | 	} | 
 | 	list_del(&hook->list); | 
 | 	if (lock) | 
 | 		mutex_unlock(&hook_mutex); | 
 | 	pr_info("extension unregistered: %s\n", hook->name); | 
 | } | 
 |  | 
 | void battery_hook_unregister(struct acpi_battery_hook *hook) | 
 | { | 
 | 	__battery_hook_unregister(hook, 1); | 
 | } | 
 | EXPORT_SYMBOL_GPL(battery_hook_unregister); | 
 |  | 
 | void battery_hook_register(struct acpi_battery_hook *hook) | 
 | { | 
 | 	struct acpi_battery *battery; | 
 |  | 
 | 	mutex_lock(&hook_mutex); | 
 | 	INIT_LIST_HEAD(&hook->list); | 
 | 	list_add(&hook->list, &battery_hook_list); | 
 | 	/* | 
 | 	 * Now that the driver is registered, we need | 
 | 	 * to notify the hook that a battery is available | 
 | 	 * for each battery, so that the driver may add | 
 | 	 * its attributes. | 
 | 	 */ | 
 | 	list_for_each_entry(battery, &acpi_battery_list, list) { | 
 | 		if (hook->add_battery(battery->bat)) { | 
 | 			/* | 
 | 			 * If a add-battery returns non-zero, | 
 | 			 * the registration of the extension has failed, | 
 | 			 * and we will not add it to the list of loaded | 
 | 			 * hooks. | 
 | 			 */ | 
 | 			pr_err("extension failed to load: %s", hook->name); | 
 | 			__battery_hook_unregister(hook, 0); | 
 | 			goto end; | 
 | 		} | 
 | 	} | 
 | 	pr_info("new extension: %s\n", hook->name); | 
 | end: | 
 | 	mutex_unlock(&hook_mutex); | 
 | } | 
 | EXPORT_SYMBOL_GPL(battery_hook_register); | 
 |  | 
 | /* | 
 |  * This function gets called right after the battery sysfs | 
 |  * attributes have been added, so that the drivers that | 
 |  * define custom sysfs attributes can add their own. | 
 |  */ | 
 | static void battery_hook_add_battery(struct acpi_battery *battery) | 
 | { | 
 | 	struct acpi_battery_hook *hook_node, *tmp; | 
 |  | 
 | 	mutex_lock(&hook_mutex); | 
 | 	INIT_LIST_HEAD(&battery->list); | 
 | 	list_add(&battery->list, &acpi_battery_list); | 
 | 	/* | 
 | 	 * Since we added a new battery to the list, we need to | 
 | 	 * iterate over the hooks and call add_battery for each | 
 | 	 * hook that was registered. This usually happens | 
 | 	 * when a battery gets hotplugged or initialized | 
 | 	 * during the battery module initialization. | 
 | 	 */ | 
 | 	list_for_each_entry_safe(hook_node, tmp, &battery_hook_list, list) { | 
 | 		if (hook_node->add_battery(battery->bat)) { | 
 | 			/* | 
 | 			 * The notification of the extensions has failed, to | 
 | 			 * prevent further errors we will unload the extension. | 
 | 			 */ | 
 | 			pr_err("error in extension, unloading: %s", | 
 | 					hook_node->name); | 
 | 			__battery_hook_unregister(hook_node, 0); | 
 | 		} | 
 | 	} | 
 | 	mutex_unlock(&hook_mutex); | 
 | } | 
 |  | 
 | static void battery_hook_remove_battery(struct acpi_battery *battery) | 
 | { | 
 | 	struct acpi_battery_hook *hook; | 
 |  | 
 | 	mutex_lock(&hook_mutex); | 
 | 	/* | 
 | 	 * Before removing the hook, we need to remove all | 
 | 	 * custom attributes from the battery. | 
 | 	 */ | 
 | 	list_for_each_entry(hook, &battery_hook_list, list) { | 
 | 		hook->remove_battery(battery->bat); | 
 | 	} | 
 | 	/* Then, just remove the battery from the list */ | 
 | 	list_del(&battery->list); | 
 | 	mutex_unlock(&hook_mutex); | 
 | } | 
 |  | 
 | static void __exit battery_hook_exit(void) | 
 | { | 
 | 	struct acpi_battery_hook *hook; | 
 | 	struct acpi_battery_hook *ptr; | 
 | 	/* | 
 | 	 * At this point, the acpi_bus_unregister_driver() | 
 | 	 * has called remove for all batteries. We just | 
 | 	 * need to remove the hooks. | 
 | 	 */ | 
 | 	list_for_each_entry_safe(hook, ptr, &battery_hook_list, list) { | 
 | 		__battery_hook_unregister(hook, 1); | 
 | 	} | 
 | 	mutex_destroy(&hook_mutex); | 
 | } | 
 |  | 
 | static int sysfs_add_battery(struct acpi_battery *battery) | 
 | { | 
 | 	struct power_supply_config psy_cfg = { .drv_data = battery, }; | 
 | 	bool full_cap_broken = false; | 
 |  | 
 | 	if (!ACPI_BATTERY_CAPACITY_VALID(battery->full_charge_capacity) && | 
 | 	    !ACPI_BATTERY_CAPACITY_VALID(battery->design_capacity)) | 
 | 		full_cap_broken = true; | 
 |  | 
 | 	if (battery->power_unit == ACPI_BATTERY_POWER_UNIT_MA) { | 
 | 		if (full_cap_broken) { | 
 | 			battery->bat_desc.properties = | 
 | 			    charge_battery_full_cap_broken_props; | 
 | 			battery->bat_desc.num_properties = | 
 | 			    ARRAY_SIZE(charge_battery_full_cap_broken_props); | 
 | 		} else { | 
 | 			battery->bat_desc.properties = charge_battery_props; | 
 | 			battery->bat_desc.num_properties = | 
 | 			    ARRAY_SIZE(charge_battery_props); | 
 | 		} | 
 | 	} else { | 
 | 		if (full_cap_broken) { | 
 | 			battery->bat_desc.properties = | 
 | 			    energy_battery_full_cap_broken_props; | 
 | 			battery->bat_desc.num_properties = | 
 | 			    ARRAY_SIZE(energy_battery_full_cap_broken_props); | 
 | 		} else { | 
 | 			battery->bat_desc.properties = energy_battery_props; | 
 | 			battery->bat_desc.num_properties = | 
 | 			    ARRAY_SIZE(energy_battery_props); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	battery->bat_desc.name = acpi_device_bid(battery->device); | 
 | 	battery->bat_desc.type = POWER_SUPPLY_TYPE_BATTERY; | 
 | 	battery->bat_desc.get_property = acpi_battery_get_property; | 
 |  | 
 | 	battery->bat = power_supply_register_no_ws(&battery->device->dev, | 
 | 				&battery->bat_desc, &psy_cfg); | 
 |  | 
 | 	if (IS_ERR(battery->bat)) { | 
 | 		int result = PTR_ERR(battery->bat); | 
 |  | 
 | 		battery->bat = NULL; | 
 | 		return result; | 
 | 	} | 
 | 	battery_hook_add_battery(battery); | 
 | 	return device_create_file(&battery->bat->dev, &alarm_attr); | 
 | } | 
 |  | 
 | static void sysfs_remove_battery(struct acpi_battery *battery) | 
 | { | 
 | 	mutex_lock(&battery->sysfs_lock); | 
 | 	if (!battery->bat) { | 
 | 		mutex_unlock(&battery->sysfs_lock); | 
 | 		return; | 
 | 	} | 
 | 	battery_hook_remove_battery(battery); | 
 | 	device_remove_file(&battery->bat->dev, &alarm_attr); | 
 | 	power_supply_unregister(battery->bat); | 
 | 	battery->bat = NULL; | 
 | 	mutex_unlock(&battery->sysfs_lock); | 
 | } | 
 |  | 
 | static void find_battery(const struct dmi_header *dm, void *private) | 
 | { | 
 | 	struct acpi_battery *battery = (struct acpi_battery *)private; | 
 | 	/* Note: the hardcoded offsets below have been extracted from | 
 | 	 * the source code of dmidecode. | 
 | 	 */ | 
 | 	if (dm->type == DMI_ENTRY_PORTABLE_BATTERY && dm->length >= 8) { | 
 | 		const u8 *dmi_data = (const u8 *)(dm + 1); | 
 | 		int dmi_capacity = get_unaligned((const u16 *)(dmi_data + 6)); | 
 |  | 
 | 		if (dm->length >= 18) | 
 | 			dmi_capacity *= dmi_data[17]; | 
 | 		if (battery->design_capacity * battery->design_voltage / 1000 | 
 | 		    != dmi_capacity && | 
 | 		    battery->design_capacity * 10 == dmi_capacity) | 
 | 			set_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, | 
 | 				&battery->flags); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * According to the ACPI spec, some kinds of primary batteries can | 
 |  * report percentage battery remaining capacity directly to OS. | 
 |  * In this case, it reports the Last Full Charged Capacity == 100 | 
 |  * and BatteryPresentRate == 0xFFFFFFFF. | 
 |  * | 
 |  * Now we found some battery reports percentage remaining capacity | 
 |  * even if it's rechargeable. | 
 |  * https://bugzilla.kernel.org/show_bug.cgi?id=15979 | 
 |  * | 
 |  * Handle this correctly so that they won't break userspace. | 
 |  */ | 
 | static void acpi_battery_quirks(struct acpi_battery *battery) | 
 | { | 
 | 	if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags)) | 
 | 		return; | 
 |  | 
 | 	if (battery->full_charge_capacity == 100 && | 
 | 		battery->rate_now == ACPI_BATTERY_VALUE_UNKNOWN && | 
 | 		battery->capacity_now >= 0 && battery->capacity_now <= 100) { | 
 | 		set_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags); | 
 | 		battery->full_charge_capacity = battery->design_capacity; | 
 | 		battery->capacity_now = (battery->capacity_now * | 
 | 				battery->full_charge_capacity) / 100; | 
 | 	} | 
 |  | 
 | 	if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags)) | 
 | 		return; | 
 |  | 
 | 	if (battery->power_unit && dmi_name_in_vendors("LENOVO")) { | 
 | 		const char *s; | 
 |  | 
 | 		s = dmi_get_system_info(DMI_PRODUCT_VERSION); | 
 | 		if (s && !strncasecmp(s, "ThinkPad", 8)) { | 
 | 			dmi_walk(find_battery, battery); | 
 | 			if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, | 
 | 				     &battery->flags) && | 
 | 			    battery->design_voltage) { | 
 | 				battery->design_capacity = | 
 | 				    battery->design_capacity * | 
 | 				    10000 / battery->design_voltage; | 
 | 				battery->full_charge_capacity = | 
 | 				    battery->full_charge_capacity * | 
 | 				    10000 / battery->design_voltage; | 
 | 				battery->design_capacity_warning = | 
 | 				    battery->design_capacity_warning * | 
 | 				    10000 / battery->design_voltage; | 
 | 				battery->capacity_now = battery->capacity_now * | 
 | 				    10000 / battery->design_voltage; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (test_bit(ACPI_BATTERY_QUIRK_DEGRADED_FULL_CHARGE, &battery->flags)) | 
 | 		return; | 
 |  | 
 | 	if (acpi_battery_is_degraded(battery) && | 
 | 	    battery->capacity_now > battery->full_charge_capacity) { | 
 | 		set_bit(ACPI_BATTERY_QUIRK_DEGRADED_FULL_CHARGE, &battery->flags); | 
 | 		battery->capacity_now = battery->full_charge_capacity; | 
 | 	} | 
 | } | 
 |  | 
 | static int acpi_battery_update(struct acpi_battery *battery, bool resume) | 
 | { | 
 | 	int result = acpi_battery_get_status(battery); | 
 |  | 
 | 	if (result) | 
 | 		return result; | 
 |  | 
 | 	if (!acpi_battery_present(battery)) { | 
 | 		sysfs_remove_battery(battery); | 
 | 		battery->update_time = 0; | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (resume) | 
 | 		return 0; | 
 |  | 
 | 	if (!battery->update_time) { | 
 | 		result = acpi_battery_get_info(battery); | 
 | 		if (result) | 
 | 			return result; | 
 | 		acpi_battery_init_alarm(battery); | 
 | 	} | 
 |  | 
 | 	result = acpi_battery_get_state(battery); | 
 | 	if (result) | 
 | 		return result; | 
 | 	acpi_battery_quirks(battery); | 
 |  | 
 | 	if (!battery->bat) { | 
 | 		result = sysfs_add_battery(battery); | 
 | 		if (result) | 
 | 			return result; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Wakeup the system if battery is critical low | 
 | 	 * or lower than the alarm level | 
 | 	 */ | 
 | 	if ((battery->state & ACPI_BATTERY_STATE_CRITICAL) || | 
 | 	    (test_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags) && | 
 | 	     (battery->capacity_now <= battery->alarm))) | 
 | 		acpi_pm_wakeup_event(&battery->device->dev); | 
 |  | 
 | 	return result; | 
 | } | 
 |  | 
 | static void acpi_battery_refresh(struct acpi_battery *battery) | 
 | { | 
 | 	int power_unit; | 
 |  | 
 | 	if (!battery->bat) | 
 | 		return; | 
 |  | 
 | 	power_unit = battery->power_unit; | 
 |  | 
 | 	acpi_battery_get_info(battery); | 
 |  | 
 | 	if (power_unit == battery->power_unit) | 
 | 		return; | 
 |  | 
 | 	/* The battery has changed its reporting units. */ | 
 | 	sysfs_remove_battery(battery); | 
 | 	sysfs_add_battery(battery); | 
 | } | 
 |  | 
 | /* Driver Interface */ | 
 | static void acpi_battery_notify(struct acpi_device *device, u32 event) | 
 | { | 
 | 	struct acpi_battery *battery = acpi_driver_data(device); | 
 | 	struct power_supply *old; | 
 |  | 
 | 	if (!battery) | 
 | 		return; | 
 | 	old = battery->bat; | 
 | 	/* | 
 | 	 * On Acer Aspire V5-573G notifications are sometimes triggered too | 
 | 	 * early. For example, when AC is unplugged and notification is | 
 | 	 * triggered, battery state is still reported as "Full", and changes to | 
 | 	 * "Discharging" only after short delay, without any notification. | 
 | 	 */ | 
 | 	if (battery_notification_delay_ms > 0) | 
 | 		msleep(battery_notification_delay_ms); | 
 | 	if (event == ACPI_BATTERY_NOTIFY_INFO) | 
 | 		acpi_battery_refresh(battery); | 
 | 	acpi_battery_update(battery, false); | 
 | 	acpi_bus_generate_netlink_event(device->pnp.device_class, | 
 | 					dev_name(&device->dev), event, | 
 | 					acpi_battery_present(battery)); | 
 | 	acpi_notifier_call_chain(device, event, acpi_battery_present(battery)); | 
 | 	/* acpi_battery_update could remove power_supply object */ | 
 | 	if (old && battery->bat) | 
 | 		power_supply_changed(battery->bat); | 
 | } | 
 |  | 
 | static int battery_notify(struct notifier_block *nb, | 
 | 			       unsigned long mode, void *_unused) | 
 | { | 
 | 	struct acpi_battery *battery = container_of(nb, struct acpi_battery, | 
 | 						    pm_nb); | 
 | 	int result; | 
 |  | 
 | 	switch (mode) { | 
 | 	case PM_POST_HIBERNATION: | 
 | 	case PM_POST_SUSPEND: | 
 | 		if (!acpi_battery_present(battery)) | 
 | 			return 0; | 
 |  | 
 | 		if (battery->bat) { | 
 | 			acpi_battery_refresh(battery); | 
 | 		} else { | 
 | 			result = acpi_battery_get_info(battery); | 
 | 			if (result) | 
 | 				return result; | 
 |  | 
 | 			result = sysfs_add_battery(battery); | 
 | 			if (result) | 
 | 				return result; | 
 | 		} | 
 |  | 
 | 		acpi_battery_init_alarm(battery); | 
 | 		acpi_battery_get_state(battery); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int __init | 
 | battery_bix_broken_package_quirk(const struct dmi_system_id *d) | 
 | { | 
 | 	battery_bix_broken_package = 1; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int __init | 
 | battery_notification_delay_quirk(const struct dmi_system_id *d) | 
 | { | 
 | 	battery_notification_delay_ms = 1000; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int __init | 
 | battery_ac_is_broken_quirk(const struct dmi_system_id *d) | 
 | { | 
 | 	battery_ac_is_broken = 1; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int __init | 
 | battery_do_not_check_pmic_quirk(const struct dmi_system_id *d) | 
 | { | 
 | 	battery_check_pmic = 0; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int __init battery_quirk_not_charging(const struct dmi_system_id *d) | 
 | { | 
 | 	battery_quirk_notcharging = 1; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct dmi_system_id bat_dmi_table[] __initconst = { | 
 | 	{ | 
 | 		/* NEC LZ750/LS */ | 
 | 		.callback = battery_bix_broken_package_quirk, | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "NEC"), | 
 | 			DMI_MATCH(DMI_PRODUCT_NAME, "PC-LZ750LS"), | 
 | 		}, | 
 | 	}, | 
 | 	{ | 
 | 		/* Acer Aspire V5-573G */ | 
 | 		.callback = battery_notification_delay_quirk, | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"), | 
 | 			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire V5-573G"), | 
 | 		}, | 
 | 	}, | 
 | 	{ | 
 | 		/* Point of View mobii wintab p800w */ | 
 | 		.callback = battery_ac_is_broken_quirk, | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), | 
 | 			DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"), | 
 | 			DMI_MATCH(DMI_BIOS_VERSION, "3BAIR1013"), | 
 | 			/* Above matches are too generic, add bios-date match */ | 
 | 			DMI_MATCH(DMI_BIOS_DATE, "08/22/2014"), | 
 | 		}, | 
 | 	}, | 
 | 	{ | 
 | 		/* ECS EF20EA, AXP288 PMIC but uses separate fuel-gauge */ | 
 | 		.callback = battery_do_not_check_pmic_quirk, | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_PRODUCT_NAME, "EF20EA"), | 
 | 		}, | 
 | 	}, | 
 | 	{ | 
 | 		/* Lenovo Ideapad Miix 320, AXP288 PMIC, separate fuel-gauge */ | 
 | 		.callback = battery_do_not_check_pmic_quirk, | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), | 
 | 			DMI_MATCH(DMI_PRODUCT_NAME, "80XF"), | 
 | 			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo MIIX 320-10ICR"), | 
 | 		}, | 
 | 	}, | 
 | 	{ | 
 | 		/* | 
 | 		 * On Lenovo ThinkPads the BIOS specification defines | 
 | 		 * a state when the bits for charging and discharging | 
 | 		 * are both set to 0. That state is "Not Charging". | 
 | 		 */ | 
 | 		.callback = battery_quirk_not_charging, | 
 | 		.ident = "Lenovo ThinkPad", | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), | 
 | 			DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad"), | 
 | 		}, | 
 | 	}, | 
 | 	{ | 
 | 		/* Microsoft Surface Go 3 */ | 
 | 		.callback = battery_notification_delay_quirk, | 
 | 		.matches = { | 
 | 			DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), | 
 | 			DMI_MATCH(DMI_PRODUCT_NAME, "Surface Go 3"), | 
 | 		}, | 
 | 	}, | 
 | 	{}, | 
 | }; | 
 |  | 
 | /* | 
 |  * Some machines'(E,G Lenovo Z480) ECs are not stable | 
 |  * during boot up and this causes battery driver fails to be | 
 |  * probed due to failure of getting battery information | 
 |  * from EC sometimes. After several retries, the operation | 
 |  * may work. So add retry code here and 20ms sleep between | 
 |  * every retries. | 
 |  */ | 
 | static int acpi_battery_update_retry(struct acpi_battery *battery) | 
 | { | 
 | 	int retry, ret; | 
 |  | 
 | 	for (retry = 5; retry; retry--) { | 
 | 		ret = acpi_battery_update(battery, false); | 
 | 		if (!ret) | 
 | 			break; | 
 |  | 
 | 		msleep(20); | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int acpi_battery_add(struct acpi_device *device) | 
 | { | 
 | 	int result = 0; | 
 | 	struct acpi_battery *battery = NULL; | 
 |  | 
 | 	if (!device) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (device->dep_unmet) | 
 | 		return -EPROBE_DEFER; | 
 |  | 
 | 	battery = kzalloc(sizeof(struct acpi_battery), GFP_KERNEL); | 
 | 	if (!battery) | 
 | 		return -ENOMEM; | 
 | 	battery->device = device; | 
 | 	strcpy(acpi_device_name(device), ACPI_BATTERY_DEVICE_NAME); | 
 | 	strcpy(acpi_device_class(device), ACPI_BATTERY_CLASS); | 
 | 	device->driver_data = battery; | 
 | 	mutex_init(&battery->lock); | 
 | 	mutex_init(&battery->sysfs_lock); | 
 | 	if (acpi_has_method(battery->device->handle, "_BIX")) | 
 | 		set_bit(ACPI_BATTERY_XINFO_PRESENT, &battery->flags); | 
 |  | 
 | 	result = acpi_battery_update_retry(battery); | 
 | 	if (result) | 
 | 		goto fail; | 
 |  | 
 | 	pr_info("Slot [%s] (battery %s)\n", acpi_device_bid(device), | 
 | 		device->status.battery_present ? "present" : "absent"); | 
 |  | 
 | 	battery->pm_nb.notifier_call = battery_notify; | 
 | 	register_pm_notifier(&battery->pm_nb); | 
 |  | 
 | 	device_init_wakeup(&device->dev, 1); | 
 |  | 
 | 	return result; | 
 |  | 
 | fail: | 
 | 	sysfs_remove_battery(battery); | 
 | 	mutex_destroy(&battery->lock); | 
 | 	mutex_destroy(&battery->sysfs_lock); | 
 | 	kfree(battery); | 
 | 	return result; | 
 | } | 
 |  | 
 | static int acpi_battery_remove(struct acpi_device *device) | 
 | { | 
 | 	struct acpi_battery *battery = NULL; | 
 |  | 
 | 	if (!device || !acpi_driver_data(device)) | 
 | 		return -EINVAL; | 
 | 	device_init_wakeup(&device->dev, 0); | 
 | 	battery = acpi_driver_data(device); | 
 | 	unregister_pm_notifier(&battery->pm_nb); | 
 | 	sysfs_remove_battery(battery); | 
 | 	mutex_destroy(&battery->lock); | 
 | 	mutex_destroy(&battery->sysfs_lock); | 
 | 	kfree(battery); | 
 | 	return 0; | 
 | } | 
 |  | 
 | #ifdef CONFIG_PM_SLEEP | 
 | /* this is needed to learn about changes made in suspended state */ | 
 | static int acpi_battery_resume(struct device *dev) | 
 | { | 
 | 	struct acpi_battery *battery; | 
 |  | 
 | 	if (!dev) | 
 | 		return -EINVAL; | 
 |  | 
 | 	battery = acpi_driver_data(to_acpi_device(dev)); | 
 | 	if (!battery) | 
 | 		return -EINVAL; | 
 |  | 
 | 	battery->update_time = 0; | 
 | 	acpi_battery_update(battery, true); | 
 | 	return 0; | 
 | } | 
 | #else | 
 | #define acpi_battery_resume NULL | 
 | #endif | 
 |  | 
 | static SIMPLE_DEV_PM_OPS(acpi_battery_pm, NULL, acpi_battery_resume); | 
 |  | 
 | static struct acpi_driver acpi_battery_driver = { | 
 | 	.name = "battery", | 
 | 	.class = ACPI_BATTERY_CLASS, | 
 | 	.ids = battery_device_ids, | 
 | 	.flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS, | 
 | 	.ops = { | 
 | 		.add = acpi_battery_add, | 
 | 		.remove = acpi_battery_remove, | 
 | 		.notify = acpi_battery_notify, | 
 | 		}, | 
 | 	.drv.pm = &acpi_battery_pm, | 
 | }; | 
 |  | 
 | static void __init acpi_battery_init_async(void *unused, async_cookie_t cookie) | 
 | { | 
 | 	unsigned int i; | 
 | 	int result; | 
 |  | 
 | 	dmi_check_system(bat_dmi_table); | 
 |  | 
 | 	if (battery_check_pmic) { | 
 | 		for (i = 0; i < ARRAY_SIZE(acpi_battery_blacklist); i++) | 
 | 			if (acpi_dev_present(acpi_battery_blacklist[i], "1", -1)) { | 
 | 				pr_info("found native %s PMIC, not loading\n", | 
 | 					acpi_battery_blacklist[i]); | 
 | 				return; | 
 | 			} | 
 | 	} | 
 |  | 
 | 	result = acpi_bus_register_driver(&acpi_battery_driver); | 
 | 	battery_driver_registered = (result == 0); | 
 | } | 
 |  | 
 | static int __init acpi_battery_init(void) | 
 | { | 
 | 	if (acpi_disabled) | 
 | 		return -ENODEV; | 
 |  | 
 | 	async_cookie = async_schedule(acpi_battery_init_async, NULL); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void __exit acpi_battery_exit(void) | 
 | { | 
 | 	async_synchronize_cookie(async_cookie + 1); | 
 | 	if (battery_driver_registered) { | 
 | 		acpi_bus_unregister_driver(&acpi_battery_driver); | 
 | 		battery_hook_exit(); | 
 | 	} | 
 | } | 
 |  | 
 | module_init(acpi_battery_init); | 
 | module_exit(acpi_battery_exit); |