| /* SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 */ |
| /****************************************************************************** |
| * |
| * Name: actbl.h - Basic ACPI Table Definitions |
| * |
| * Copyright (C) 2000 - 2022, Intel Corp. |
| * |
| *****************************************************************************/ |
| |
| #ifndef __ACTBL_H__ |
| #define __ACTBL_H__ |
| |
| /******************************************************************************* |
| * |
| * Fundamental ACPI tables |
| * |
| * This file contains definitions for the ACPI tables that are directly consumed |
| * by ACPICA. All other tables are consumed by the OS-dependent ACPI-related |
| * device drivers and other OS support code. |
| * |
| * The RSDP and FACS do not use the common ACPI table header. All other ACPI |
| * tables use the header. |
| * |
| ******************************************************************************/ |
| |
| /* |
| * Values for description table header signatures for tables defined in this |
| * file. Useful because they make it more difficult to inadvertently type in |
| * the wrong signature. |
| */ |
| #define ACPI_SIG_DSDT "DSDT" /* Differentiated System Description Table */ |
| #define ACPI_SIG_FADT "FACP" /* Fixed ACPI Description Table */ |
| #define ACPI_SIG_FACS "FACS" /* Firmware ACPI Control Structure */ |
| #define ACPI_SIG_OSDT "OSDT" /* Override System Description Table */ |
| #define ACPI_SIG_PSDT "PSDT" /* Persistent System Description Table */ |
| #define ACPI_SIG_RSDP "RSD PTR " /* Root System Description Pointer */ |
| #define ACPI_SIG_RSDT "RSDT" /* Root System Description Table */ |
| #define ACPI_SIG_XSDT "XSDT" /* Extended System Description Table */ |
| #define ACPI_SIG_SSDT "SSDT" /* Secondary System Description Table */ |
| #define ACPI_RSDP_NAME "RSDP" /* Short name for RSDP, not signature */ |
| #define ACPI_OEM_NAME "OEM" /* Short name for OEM, not signature */ |
| |
| /* |
| * All tables and structures must be byte-packed to match the ACPI |
| * specification, since the tables are provided by the system BIOS |
| */ |
| #pragma pack(1) |
| |
| /* |
| * Note: C bitfields are not used for this reason: |
| * |
| * "Bitfields are great and easy to read, but unfortunately the C language |
| * does not specify the layout of bitfields in memory, which means they are |
| * essentially useless for dealing with packed data in on-disk formats or |
| * binary wire protocols." (Or ACPI tables and buffers.) "If you ask me, |
| * this decision was a design error in C. Ritchie could have picked an order |
| * and stuck with it." Norman Ramsey. |
| * See http://stackoverflow.com/a/1053662/41661 |
| */ |
| |
| /******************************************************************************* |
| * |
| * Master ACPI Table Header. This common header is used by all ACPI tables |
| * except the RSDP and FACS. |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_header { |
| char signature[ACPI_NAMESEG_SIZE]; /* ASCII table signature */ |
| u32 length; /* Length of table in bytes, including this header */ |
| u8 revision; /* ACPI Specification minor version number */ |
| u8 checksum; /* To make sum of entire table == 0 */ |
| char oem_id[ACPI_OEM_ID_SIZE]; /* ASCII OEM identification */ |
| char oem_table_id[ACPI_OEM_TABLE_ID_SIZE]; /* ASCII OEM table identification */ |
| u32 oem_revision; /* OEM revision number */ |
| char asl_compiler_id[ACPI_NAMESEG_SIZE]; /* ASCII ASL compiler vendor ID */ |
| u32 asl_compiler_revision; /* ASL compiler version */ |
| }; |
| |
| /******************************************************************************* |
| * |
| * GAS - Generic Address Structure (ACPI 2.0+) |
| * |
| * Note: Since this structure is used in the ACPI tables, it is byte aligned. |
| * If misaligned access is not supported by the hardware, accesses to the |
| * 64-bit Address field must be performed with care. |
| * |
| ******************************************************************************/ |
| |
| struct acpi_generic_address { |
| u8 space_id; /* Address space where struct or register exists */ |
| u8 bit_width; /* Size in bits of given register */ |
| u8 bit_offset; /* Bit offset within the register */ |
| u8 access_width; /* Minimum Access size (ACPI 3.0) */ |
| u64 address; /* 64-bit address of struct or register */ |
| }; |
| |
| /******************************************************************************* |
| * |
| * RSDP - Root System Description Pointer (Signature is "RSD PTR ") |
| * Version 2 |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_rsdp { |
| char signature[8]; /* ACPI signature, contains "RSD PTR " */ |
| u8 checksum; /* ACPI 1.0 checksum */ |
| char oem_id[ACPI_OEM_ID_SIZE]; /* OEM identification */ |
| u8 revision; /* Must be (0) for ACPI 1.0 or (2) for ACPI 2.0+ */ |
| u32 rsdt_physical_address; /* 32-bit physical address of the RSDT */ |
| u32 length; /* Table length in bytes, including header (ACPI 2.0+) */ |
| u64 xsdt_physical_address; /* 64-bit physical address of the XSDT (ACPI 2.0+) */ |
| u8 extended_checksum; /* Checksum of entire table (ACPI 2.0+) */ |
| u8 reserved[3]; /* Reserved, must be zero */ |
| }; |
| |
| /* Standalone struct for the ACPI 1.0 RSDP */ |
| |
| struct acpi_rsdp_common { |
| char signature[8]; |
| u8 checksum; |
| char oem_id[ACPI_OEM_ID_SIZE]; |
| u8 revision; |
| u32 rsdt_physical_address; |
| }; |
| |
| /* Standalone struct for the extended part of the RSDP (ACPI 2.0+) */ |
| |
| struct acpi_rsdp_extension { |
| u32 length; |
| u64 xsdt_physical_address; |
| u8 extended_checksum; |
| u8 reserved[3]; |
| }; |
| |
| /******************************************************************************* |
| * |
| * RSDT/XSDT - Root System Description Tables |
| * Version 1 (both) |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_rsdt { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u32 table_offset_entry[1]; /* Array of pointers to ACPI tables */ |
| }; |
| |
| struct acpi_table_xsdt { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u64 table_offset_entry[1]; /* Array of pointers to ACPI tables */ |
| }; |
| |
| #define ACPI_RSDT_ENTRY_SIZE (sizeof (u32)) |
| #define ACPI_XSDT_ENTRY_SIZE (sizeof (u64)) |
| |
| /******************************************************************************* |
| * |
| * FACS - Firmware ACPI Control Structure (FACS) |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_facs { |
| char signature[4]; /* ASCII table signature */ |
| u32 length; /* Length of structure, in bytes */ |
| u32 hardware_signature; /* Hardware configuration signature */ |
| u32 firmware_waking_vector; /* 32-bit physical address of the Firmware Waking Vector */ |
| u32 global_lock; /* Global Lock for shared hardware resources */ |
| u32 flags; |
| u64 xfirmware_waking_vector; /* 64-bit version of the Firmware Waking Vector (ACPI 2.0+) */ |
| u8 version; /* Version of this table (ACPI 2.0+) */ |
| u8 reserved[3]; /* Reserved, must be zero */ |
| u32 ospm_flags; /* Flags to be set by OSPM (ACPI 4.0) */ |
| u8 reserved1[24]; /* Reserved, must be zero */ |
| }; |
| |
| /* Masks for global_lock flag field above */ |
| |
| #define ACPI_GLOCK_PENDING (1) /* 00: Pending global lock ownership */ |
| #define ACPI_GLOCK_OWNED (1<<1) /* 01: Global lock is owned */ |
| |
| /* Masks for Flags field above */ |
| |
| #define ACPI_FACS_S4_BIOS_PRESENT (1) /* 00: S4BIOS support is present */ |
| #define ACPI_FACS_64BIT_WAKE (1<<1) /* 01: 64-bit wake vector supported (ACPI 4.0) */ |
| |
| /* Masks for ospm_flags field above */ |
| |
| #define ACPI_FACS_64BIT_ENVIRONMENT (1) /* 00: 64-bit wake environment is required (ACPI 4.0) */ |
| |
| /******************************************************************************* |
| * |
| * FADT - Fixed ACPI Description Table (Signature "FACP") |
| * Version 6 |
| * |
| ******************************************************************************/ |
| |
| /* Fields common to all versions of the FADT */ |
| |
| struct acpi_table_fadt { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u32 facs; /* 32-bit physical address of FACS */ |
| u32 dsdt; /* 32-bit physical address of DSDT */ |
| u8 model; /* System Interrupt Model (ACPI 1.0) - not used in ACPI 2.0+ */ |
| u8 preferred_profile; /* Conveys preferred power management profile to OSPM. */ |
| u16 sci_interrupt; /* System vector of SCI interrupt */ |
| u32 smi_command; /* 32-bit Port address of SMI command port */ |
| u8 acpi_enable; /* Value to write to SMI_CMD to enable ACPI */ |
| u8 acpi_disable; /* Value to write to SMI_CMD to disable ACPI */ |
| u8 s4_bios_request; /* Value to write to SMI_CMD to enter S4BIOS state */ |
| u8 pstate_control; /* Processor performance state control */ |
| u32 pm1a_event_block; /* 32-bit port address of Power Mgt 1a Event Reg Blk */ |
| u32 pm1b_event_block; /* 32-bit port address of Power Mgt 1b Event Reg Blk */ |
| u32 pm1a_control_block; /* 32-bit port address of Power Mgt 1a Control Reg Blk */ |
| u32 pm1b_control_block; /* 32-bit port address of Power Mgt 1b Control Reg Blk */ |
| u32 pm2_control_block; /* 32-bit port address of Power Mgt 2 Control Reg Blk */ |
| u32 pm_timer_block; /* 32-bit port address of Power Mgt Timer Ctrl Reg Blk */ |
| u32 gpe0_block; /* 32-bit port address of General Purpose Event 0 Reg Blk */ |
| u32 gpe1_block; /* 32-bit port address of General Purpose Event 1 Reg Blk */ |
| u8 pm1_event_length; /* Byte Length of ports at pm1x_event_block */ |
| u8 pm1_control_length; /* Byte Length of ports at pm1x_control_block */ |
| u8 pm2_control_length; /* Byte Length of ports at pm2_control_block */ |
| u8 pm_timer_length; /* Byte Length of ports at pm_timer_block */ |
| u8 gpe0_block_length; /* Byte Length of ports at gpe0_block */ |
| u8 gpe1_block_length; /* Byte Length of ports at gpe1_block */ |
| u8 gpe1_base; /* Offset in GPE number space where GPE1 events start */ |
| u8 cst_control; /* Support for the _CST object and C-States change notification */ |
| u16 c2_latency; /* Worst case HW latency to enter/exit C2 state */ |
| u16 c3_latency; /* Worst case HW latency to enter/exit C3 state */ |
| u16 flush_size; /* Processor memory cache line width, in bytes */ |
| u16 flush_stride; /* Number of flush strides that need to be read */ |
| u8 duty_offset; /* Processor duty cycle index in processor P_CNT reg */ |
| u8 duty_width; /* Processor duty cycle value bit width in P_CNT register */ |
| u8 day_alarm; /* Index to day-of-month alarm in RTC CMOS RAM */ |
| u8 month_alarm; /* Index to month-of-year alarm in RTC CMOS RAM */ |
| u8 century; /* Index to century in RTC CMOS RAM */ |
| u16 boot_flags; /* IA-PC Boot Architecture Flags (see below for individual flags) */ |
| u8 reserved; /* Reserved, must be zero */ |
| u32 flags; /* Miscellaneous flag bits (see below for individual flags) */ |
| struct acpi_generic_address reset_register; /* 64-bit address of the Reset register */ |
| u8 reset_value; /* Value to write to the reset_register port to reset the system */ |
| u16 arm_boot_flags; /* ARM-Specific Boot Flags (see below for individual flags) (ACPI 5.1) */ |
| u8 minor_revision; /* FADT Minor Revision (ACPI 5.1) */ |
| u64 Xfacs; /* 64-bit physical address of FACS */ |
| u64 Xdsdt; /* 64-bit physical address of DSDT */ |
| struct acpi_generic_address xpm1a_event_block; /* 64-bit Extended Power Mgt 1a Event Reg Blk address */ |
| struct acpi_generic_address xpm1b_event_block; /* 64-bit Extended Power Mgt 1b Event Reg Blk address */ |
| struct acpi_generic_address xpm1a_control_block; /* 64-bit Extended Power Mgt 1a Control Reg Blk address */ |
| struct acpi_generic_address xpm1b_control_block; /* 64-bit Extended Power Mgt 1b Control Reg Blk address */ |
| struct acpi_generic_address xpm2_control_block; /* 64-bit Extended Power Mgt 2 Control Reg Blk address */ |
| struct acpi_generic_address xpm_timer_block; /* 64-bit Extended Power Mgt Timer Ctrl Reg Blk address */ |
| struct acpi_generic_address xgpe0_block; /* 64-bit Extended General Purpose Event 0 Reg Blk address */ |
| struct acpi_generic_address xgpe1_block; /* 64-bit Extended General Purpose Event 1 Reg Blk address */ |
| struct acpi_generic_address sleep_control; /* 64-bit Sleep Control register (ACPI 5.0) */ |
| struct acpi_generic_address sleep_status; /* 64-bit Sleep Status register (ACPI 5.0) */ |
| u64 hypervisor_id; /* Hypervisor Vendor ID (ACPI 6.0) */ |
| }; |
| |
| /* Masks for FADT IA-PC Boot Architecture Flags (boot_flags) [Vx]=Introduced in this FADT revision */ |
| |
| #define ACPI_FADT_LEGACY_DEVICES (1) /* 00: [V2] System has LPC or ISA bus devices */ |
| #define ACPI_FADT_8042 (1<<1) /* 01: [V3] System has an 8042 controller on port 60/64 */ |
| #define ACPI_FADT_NO_VGA (1<<2) /* 02: [V4] It is not safe to probe for VGA hardware */ |
| #define ACPI_FADT_NO_MSI (1<<3) /* 03: [V4] Message Signaled Interrupts (MSI) must not be enabled */ |
| #define ACPI_FADT_NO_ASPM (1<<4) /* 04: [V4] PCIe ASPM control must not be enabled */ |
| #define ACPI_FADT_NO_CMOS_RTC (1<<5) /* 05: [V5] No CMOS real-time clock present */ |
| |
| #define FADT2_REVISION_ID 3 |
| |
| /* Masks for FADT ARM Boot Architecture Flags (arm_boot_flags) ACPI 5.1 */ |
| |
| #define ACPI_FADT_PSCI_COMPLIANT (1) /* 00: [V5+] PSCI 0.2+ is implemented */ |
| #define ACPI_FADT_PSCI_USE_HVC (1<<1) /* 01: [V5+] HVC must be used instead of SMC as the PSCI conduit */ |
| |
| /* Masks for FADT flags */ |
| |
| #define ACPI_FADT_WBINVD (1) /* 00: [V1] The WBINVD instruction works properly */ |
| #define ACPI_FADT_WBINVD_FLUSH (1<<1) /* 01: [V1] WBINVD flushes but does not invalidate caches */ |
| #define ACPI_FADT_C1_SUPPORTED (1<<2) /* 02: [V1] All processors support C1 state */ |
| #define ACPI_FADT_C2_MP_SUPPORTED (1<<3) /* 03: [V1] C2 state works on MP system */ |
| #define ACPI_FADT_POWER_BUTTON (1<<4) /* 04: [V1] Power button is handled as a control method device */ |
| #define ACPI_FADT_SLEEP_BUTTON (1<<5) /* 05: [V1] Sleep button is handled as a control method device */ |
| #define ACPI_FADT_FIXED_RTC (1<<6) /* 06: [V1] RTC wakeup status is not in fixed register space */ |
| #define ACPI_FADT_S4_RTC_WAKE (1<<7) /* 07: [V1] RTC alarm can wake system from S4 */ |
| #define ACPI_FADT_32BIT_TIMER (1<<8) /* 08: [V1] ACPI timer width is 32-bit (0=24-bit) */ |
| #define ACPI_FADT_DOCKING_SUPPORTED (1<<9) /* 09: [V1] Docking supported */ |
| #define ACPI_FADT_RESET_REGISTER (1<<10) /* 10: [V2] System reset via the FADT RESET_REG supported */ |
| #define ACPI_FADT_SEALED_CASE (1<<11) /* 11: [V3] No internal expansion capabilities and case is sealed */ |
| #define ACPI_FADT_HEADLESS (1<<12) /* 12: [V3] No local video capabilities or local input devices */ |
| #define ACPI_FADT_SLEEP_TYPE (1<<13) /* 13: [V3] Must execute native instruction after writing SLP_TYPx register */ |
| #define ACPI_FADT_PCI_EXPRESS_WAKE (1<<14) /* 14: [V4] System supports PCIEXP_WAKE (STS/EN) bits (ACPI 3.0) */ |
| #define ACPI_FADT_PLATFORM_CLOCK (1<<15) /* 15: [V4] OSPM should use platform-provided timer (ACPI 3.0) */ |
| #define ACPI_FADT_S4_RTC_VALID (1<<16) /* 16: [V4] Contents of RTC_STS valid after S4 wake (ACPI 3.0) */ |
| #define ACPI_FADT_REMOTE_POWER_ON (1<<17) /* 17: [V4] System is compatible with remote power on (ACPI 3.0) */ |
| #define ACPI_FADT_APIC_CLUSTER (1<<18) /* 18: [V4] All local APICs must use cluster model (ACPI 3.0) */ |
| #define ACPI_FADT_APIC_PHYSICAL (1<<19) /* 19: [V4] All local xAPICs must use physical dest mode (ACPI 3.0) */ |
| #define ACPI_FADT_HW_REDUCED (1<<20) /* 20: [V5] ACPI hardware is not implemented (ACPI 5.0) */ |
| #define ACPI_FADT_LOW_POWER_S0 (1<<21) /* 21: [V5] S0 power savings are equal or better than S3 (ACPI 5.0) */ |
| |
| /* Values for preferred_profile (Preferred Power Management Profiles) */ |
| |
| enum acpi_preferred_pm_profiles { |
| PM_UNSPECIFIED = 0, |
| PM_DESKTOP = 1, |
| PM_MOBILE = 2, |
| PM_WORKSTATION = 3, |
| PM_ENTERPRISE_SERVER = 4, |
| PM_SOHO_SERVER = 5, |
| PM_APPLIANCE_PC = 6, |
| PM_PERFORMANCE_SERVER = 7, |
| PM_TABLET = 8 |
| }; |
| |
| /* Values for sleep_status and sleep_control registers (V5+ FADT) */ |
| |
| #define ACPI_X_WAKE_STATUS 0x80 |
| #define ACPI_X_SLEEP_TYPE_MASK 0x1C |
| #define ACPI_X_SLEEP_TYPE_POSITION 0x02 |
| #define ACPI_X_SLEEP_ENABLE 0x20 |
| |
| /* Reset to default packing */ |
| |
| #pragma pack() |
| |
| /* |
| * Internal table-related structures |
| */ |
| union acpi_name_union { |
| u32 integer; |
| char ascii[4]; |
| }; |
| |
| /* Internal ACPI Table Descriptor. One per ACPI table. */ |
| |
| struct acpi_table_desc { |
| acpi_physical_address address; |
| struct acpi_table_header *pointer; |
| u32 length; /* Length fixed at 32 bits (fixed in table header) */ |
| union acpi_name_union signature; |
| acpi_owner_id owner_id; |
| u8 flags; |
| u16 validation_count; |
| }; |
| |
| /* |
| * Maximum value of the validation_count field in struct acpi_table_desc. |
| * When reached, validation_count cannot be changed any more and the table will |
| * be permanently regarded as validated. |
| * |
| * This is to prevent situations in which unbalanced table get/put operations |
| * may cause premature table unmapping in the OS to happen. |
| * |
| * The maximum validation count can be defined to any value, but should be |
| * greater than the maximum number of OS early stage mapping slots to avoid |
| * leaking early stage table mappings to the late stage. |
| */ |
| #define ACPI_MAX_TABLE_VALIDATIONS ACPI_UINT16_MAX |
| |
| /* Masks for Flags field above */ |
| |
| #define ACPI_TABLE_ORIGIN_EXTERNAL_VIRTUAL (0) /* Virtual address, external maintained */ |
| #define ACPI_TABLE_ORIGIN_INTERNAL_PHYSICAL (1) /* Physical address, internally mapped */ |
| #define ACPI_TABLE_ORIGIN_INTERNAL_VIRTUAL (2) /* Virtual address, internallly allocated */ |
| #define ACPI_TABLE_ORIGIN_MASK (3) |
| #define ACPI_TABLE_IS_VERIFIED (4) |
| #define ACPI_TABLE_IS_LOADED (8) |
| |
| /* |
| * Get the remaining ACPI tables |
| */ |
| #include <acpi/actbl1.h> |
| #include <acpi/actbl2.h> |
| #include <acpi/actbl3.h> |
| |
| /* Macros used to generate offsets to specific table fields */ |
| |
| #define ACPI_FADT_OFFSET(f) (u16) ACPI_OFFSET (struct acpi_table_fadt, f) |
| |
| /* |
| * Sizes of the various flavors of FADT. We need to look closely |
| * at the FADT length because the version number essentially tells |
| * us nothing because of many BIOS bugs where the version does not |
| * match the expected length. In other words, the length of the |
| * FADT is the bottom line as to what the version really is. |
| * |
| * For reference, the values below are as follows: |
| * FADT V1 size: 0x074 |
| * FADT V2 size: 0x084 |
| * FADT V3 size: 0x0F4 |
| * FADT V4 size: 0x0F4 |
| * FADT V5 size: 0x10C |
| * FADT V6 size: 0x114 |
| */ |
| #define ACPI_FADT_V1_SIZE (u32) (ACPI_FADT_OFFSET (flags) + 4) |
| #define ACPI_FADT_V2_SIZE (u32) (ACPI_FADT_OFFSET (minor_revision) + 1) |
| #define ACPI_FADT_V3_SIZE (u32) (ACPI_FADT_OFFSET (sleep_control)) |
| #define ACPI_FADT_V5_SIZE (u32) (ACPI_FADT_OFFSET (hypervisor_id)) |
| #define ACPI_FADT_V6_SIZE (u32) (sizeof (struct acpi_table_fadt)) |
| |
| #define ACPI_FADT_CONFORMANCE "ACPI 6.1 (FADT version 6)" |
| |
| #endif /* __ACTBL_H__ */ |
