| // SPDX-License-Identifier: GPL-2.0 | 
 | /* | 
 |  * Copyright (C) 2019 MediaTek Inc. | 
 |  * | 
 |  * Author: | 
 |  *  Min Guo <min.guo@mediatek.com> | 
 |  *  Yonglong Wu <yonglong.wu@mediatek.com> | 
 |  */ | 
 |  | 
 | #include <linux/clk.h> | 
 | #include <linux/dma-mapping.h> | 
 | #include <linux/module.h> | 
 | #include <linux/of_platform.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/usb/role.h> | 
 | #include <linux/usb/usb_phy_generic.h> | 
 | #include "musb_core.h" | 
 | #include "musb_dma.h" | 
 |  | 
 | #define USB_L1INTS		0x00a0 | 
 | #define USB_L1INTM		0x00a4 | 
 | #define MTK_MUSB_TXFUNCADDR	0x0480 | 
 |  | 
 | /* MediaTek controller toggle enable and status reg */ | 
 | #define MUSB_RXTOG		0x80 | 
 | #define MUSB_RXTOGEN		0x82 | 
 | #define MUSB_TXTOG		0x84 | 
 | #define MUSB_TXTOGEN		0x86 | 
 | #define MTK_TOGGLE_EN		GENMASK(15, 0) | 
 |  | 
 | #define TX_INT_STATUS		BIT(0) | 
 | #define RX_INT_STATUS		BIT(1) | 
 | #define USBCOM_INT_STATUS	BIT(2) | 
 | #define DMA_INT_STATUS		BIT(3) | 
 |  | 
 | #define DMA_INTR_STATUS_MSK	GENMASK(7, 0) | 
 | #define DMA_INTR_UNMASK_SET_MSK	GENMASK(31, 24) | 
 |  | 
 | struct mtk_glue { | 
 | 	struct device *dev; | 
 | 	struct musb *musb; | 
 | 	struct platform_device *musb_pdev; | 
 | 	struct platform_device *usb_phy; | 
 | 	struct phy *phy; | 
 | 	struct usb_phy *xceiv; | 
 | 	enum phy_mode phy_mode; | 
 | 	struct clk *main; | 
 | 	struct clk *mcu; | 
 | 	struct clk *univpll; | 
 | 	enum usb_role role; | 
 | 	struct usb_role_switch *role_sw; | 
 | }; | 
 |  | 
 | static int mtk_musb_clks_get(struct mtk_glue *glue) | 
 | { | 
 | 	struct device *dev = glue->dev; | 
 |  | 
 | 	glue->main = devm_clk_get(dev, "main"); | 
 | 	if (IS_ERR(glue->main)) { | 
 | 		dev_err(dev, "fail to get main clock\n"); | 
 | 		return PTR_ERR(glue->main); | 
 | 	} | 
 |  | 
 | 	glue->mcu = devm_clk_get(dev, "mcu"); | 
 | 	if (IS_ERR(glue->mcu)) { | 
 | 		dev_err(dev, "fail to get mcu clock\n"); | 
 | 		return PTR_ERR(glue->mcu); | 
 | 	} | 
 |  | 
 | 	glue->univpll = devm_clk_get(dev, "univpll"); | 
 | 	if (IS_ERR(glue->univpll)) { | 
 | 		dev_err(dev, "fail to get univpll clock\n"); | 
 | 		return PTR_ERR(glue->univpll); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int mtk_musb_clks_enable(struct mtk_glue *glue) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	ret = clk_prepare_enable(glue->main); | 
 | 	if (ret) { | 
 | 		dev_err(glue->dev, "failed to enable main clock\n"); | 
 | 		goto err_main_clk; | 
 | 	} | 
 |  | 
 | 	ret = clk_prepare_enable(glue->mcu); | 
 | 	if (ret) { | 
 | 		dev_err(glue->dev, "failed to enable mcu clock\n"); | 
 | 		goto err_mcu_clk; | 
 | 	} | 
 |  | 
 | 	ret = clk_prepare_enable(glue->univpll); | 
 | 	if (ret) { | 
 | 		dev_err(glue->dev, "failed to enable univpll clock\n"); | 
 | 		goto err_univpll_clk; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_univpll_clk: | 
 | 	clk_disable_unprepare(glue->mcu); | 
 | err_mcu_clk: | 
 | 	clk_disable_unprepare(glue->main); | 
 | err_main_clk: | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void mtk_musb_clks_disable(struct mtk_glue *glue) | 
 | { | 
 | 	clk_disable_unprepare(glue->univpll); | 
 | 	clk_disable_unprepare(glue->mcu); | 
 | 	clk_disable_unprepare(glue->main); | 
 | } | 
 |  | 
 | static int mtk_otg_switch_set(struct mtk_glue *glue, enum usb_role role) | 
 | { | 
 | 	struct musb *musb = glue->musb; | 
 | 	u8 devctl = readb(musb->mregs + MUSB_DEVCTL); | 
 | 	enum usb_role new_role; | 
 |  | 
 | 	if (role == glue->role) | 
 | 		return 0; | 
 |  | 
 | 	switch (role) { | 
 | 	case USB_ROLE_HOST: | 
 | 		musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; | 
 | 		glue->phy_mode = PHY_MODE_USB_HOST; | 
 | 		new_role = USB_ROLE_HOST; | 
 | 		if (glue->role == USB_ROLE_NONE) | 
 | 			phy_power_on(glue->phy); | 
 |  | 
 | 		devctl |= MUSB_DEVCTL_SESSION; | 
 | 		musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); | 
 | 		MUSB_HST_MODE(musb); | 
 | 		break; | 
 | 	case USB_ROLE_DEVICE: | 
 | 		musb->xceiv->otg->state = OTG_STATE_B_IDLE; | 
 | 		glue->phy_mode = PHY_MODE_USB_DEVICE; | 
 | 		new_role = USB_ROLE_DEVICE; | 
 | 		devctl &= ~MUSB_DEVCTL_SESSION; | 
 | 		musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); | 
 | 		if (glue->role == USB_ROLE_NONE) | 
 | 			phy_power_on(glue->phy); | 
 |  | 
 | 		MUSB_DEV_MODE(musb); | 
 | 		break; | 
 | 	case USB_ROLE_NONE: | 
 | 		glue->phy_mode = PHY_MODE_USB_OTG; | 
 | 		new_role = USB_ROLE_NONE; | 
 | 		devctl &= ~MUSB_DEVCTL_SESSION; | 
 | 		musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); | 
 | 		if (glue->role != USB_ROLE_NONE) | 
 | 			phy_power_off(glue->phy); | 
 |  | 
 | 		break; | 
 | 	default: | 
 | 		dev_err(glue->dev, "Invalid State\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	glue->role = new_role; | 
 | 	phy_set_mode(glue->phy, glue->phy_mode); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int musb_usb_role_sx_set(struct usb_role_switch *sw, enum usb_role role) | 
 | { | 
 | 	return mtk_otg_switch_set(usb_role_switch_get_drvdata(sw), role); | 
 | } | 
 |  | 
 | static enum usb_role musb_usb_role_sx_get(struct usb_role_switch *sw) | 
 | { | 
 | 	struct mtk_glue *glue = usb_role_switch_get_drvdata(sw); | 
 |  | 
 | 	return glue->role; | 
 | } | 
 |  | 
 | static int mtk_otg_switch_init(struct mtk_glue *glue) | 
 | { | 
 | 	struct usb_role_switch_desc role_sx_desc = { 0 }; | 
 |  | 
 | 	role_sx_desc.set = musb_usb_role_sx_set; | 
 | 	role_sx_desc.get = musb_usb_role_sx_get; | 
 | 	role_sx_desc.fwnode = dev_fwnode(glue->dev); | 
 | 	role_sx_desc.driver_data = glue; | 
 | 	glue->role_sw = usb_role_switch_register(glue->dev, &role_sx_desc); | 
 |  | 
 | 	return PTR_ERR_OR_ZERO(glue->role_sw); | 
 | } | 
 |  | 
 | static void mtk_otg_switch_exit(struct mtk_glue *glue) | 
 | { | 
 | 	return usb_role_switch_unregister(glue->role_sw); | 
 | } | 
 |  | 
 | static irqreturn_t generic_interrupt(int irq, void *__hci) | 
 | { | 
 | 	unsigned long flags; | 
 | 	irqreturn_t retval = IRQ_NONE; | 
 | 	struct musb *musb = __hci; | 
 |  | 
 | 	spin_lock_irqsave(&musb->lock, flags); | 
 | 	musb->int_usb = musb_clearb(musb->mregs, MUSB_INTRUSB); | 
 | 	musb->int_rx = musb_clearw(musb->mregs, MUSB_INTRRX); | 
 | 	musb->int_tx = musb_clearw(musb->mregs, MUSB_INTRTX); | 
 |  | 
 | 	if ((musb->int_usb & MUSB_INTR_RESET) && !is_host_active(musb)) { | 
 | 		/* ep0 FADDR must be 0 when (re)entering peripheral mode */ | 
 | 		musb_ep_select(musb->mregs, 0); | 
 | 		musb_writeb(musb->mregs, MUSB_FADDR, 0); | 
 | 	} | 
 |  | 
 | 	if (musb->int_usb || musb->int_tx || musb->int_rx) | 
 | 		retval = musb_interrupt(musb); | 
 |  | 
 | 	spin_unlock_irqrestore(&musb->lock, flags); | 
 |  | 
 | 	return retval; | 
 | } | 
 |  | 
 | static irqreturn_t mtk_musb_interrupt(int irq, void *dev_id) | 
 | { | 
 | 	irqreturn_t retval = IRQ_NONE; | 
 | 	struct musb *musb = (struct musb *)dev_id; | 
 | 	u32 l1_ints; | 
 |  | 
 | 	l1_ints = musb_readl(musb->mregs, USB_L1INTS) & | 
 | 			musb_readl(musb->mregs, USB_L1INTM); | 
 |  | 
 | 	if (l1_ints & (TX_INT_STATUS | RX_INT_STATUS | USBCOM_INT_STATUS)) | 
 | 		retval = generic_interrupt(irq, musb); | 
 |  | 
 | #if defined(CONFIG_USB_INVENTRA_DMA) | 
 | 	if (l1_ints & DMA_INT_STATUS) | 
 | 		retval = dma_controller_irq(irq, musb->dma_controller); | 
 | #endif | 
 | 	return retval; | 
 | } | 
 |  | 
 | static u32 mtk_musb_busctl_offset(u8 epnum, u16 offset) | 
 | { | 
 | 	return MTK_MUSB_TXFUNCADDR + offset + 8 * epnum; | 
 | } | 
 |  | 
 | static u8 mtk_musb_clearb(void __iomem *addr, unsigned int offset) | 
 | { | 
 | 	u8 data; | 
 |  | 
 | 	/* W1C */ | 
 | 	data = musb_readb(addr, offset); | 
 | 	musb_writeb(addr, offset, data); | 
 | 	return data; | 
 | } | 
 |  | 
 | static u16 mtk_musb_clearw(void __iomem *addr, unsigned int offset) | 
 | { | 
 | 	u16 data; | 
 |  | 
 | 	/* W1C */ | 
 | 	data = musb_readw(addr, offset); | 
 | 	musb_writew(addr, offset, data); | 
 | 	return data; | 
 | } | 
 |  | 
 | static int mtk_musb_set_mode(struct musb *musb, u8 mode) | 
 | { | 
 | 	struct device *dev = musb->controller; | 
 | 	struct mtk_glue *glue = dev_get_drvdata(dev->parent); | 
 | 	enum phy_mode new_mode; | 
 | 	enum usb_role new_role; | 
 |  | 
 | 	switch (mode) { | 
 | 	case MUSB_HOST: | 
 | 		new_mode = PHY_MODE_USB_HOST; | 
 | 		new_role = USB_ROLE_HOST; | 
 | 		break; | 
 | 	case MUSB_PERIPHERAL: | 
 | 		new_mode = PHY_MODE_USB_DEVICE; | 
 | 		new_role = USB_ROLE_DEVICE; | 
 | 		break; | 
 | 	case MUSB_OTG: | 
 | 		new_mode = PHY_MODE_USB_OTG; | 
 | 		new_role = USB_ROLE_NONE; | 
 | 		break; | 
 | 	default: | 
 | 		dev_err(glue->dev, "Invalid mode request\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (glue->phy_mode == new_mode) | 
 | 		return 0; | 
 |  | 
 | 	if (musb->port_mode != MUSB_OTG) { | 
 | 		dev_err(glue->dev, "Does not support changing modes\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	mtk_otg_switch_set(glue, new_role); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int mtk_musb_init(struct musb *musb) | 
 | { | 
 | 	struct device *dev = musb->controller; | 
 | 	struct mtk_glue *glue = dev_get_drvdata(dev->parent); | 
 | 	int ret; | 
 |  | 
 | 	glue->musb = musb; | 
 | 	musb->phy = glue->phy; | 
 | 	musb->xceiv = glue->xceiv; | 
 | 	musb->is_host = false; | 
 | 	musb->isr = mtk_musb_interrupt; | 
 |  | 
 | 	/* Set TX/RX toggle enable */ | 
 | 	musb_writew(musb->mregs, MUSB_TXTOGEN, MTK_TOGGLE_EN); | 
 | 	musb_writew(musb->mregs, MUSB_RXTOGEN, MTK_TOGGLE_EN); | 
 |  | 
 | 	if (musb->port_mode == MUSB_OTG) { | 
 | 		ret = mtk_otg_switch_init(glue); | 
 | 		if (ret) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	ret = phy_init(glue->phy); | 
 | 	if (ret) | 
 | 		goto err_phy_init; | 
 |  | 
 | 	ret = phy_power_on(glue->phy); | 
 | 	if (ret) | 
 | 		goto err_phy_power_on; | 
 |  | 
 | 	phy_set_mode(glue->phy, glue->phy_mode); | 
 |  | 
 | #if defined(CONFIG_USB_INVENTRA_DMA) | 
 | 	musb_writel(musb->mregs, MUSB_HSDMA_INTR, | 
 | 		    DMA_INTR_STATUS_MSK | DMA_INTR_UNMASK_SET_MSK); | 
 | #endif | 
 | 	musb_writel(musb->mregs, USB_L1INTM, TX_INT_STATUS | RX_INT_STATUS | | 
 | 		    USBCOM_INT_STATUS | DMA_INT_STATUS); | 
 | 	return 0; | 
 |  | 
 | err_phy_power_on: | 
 | 	phy_exit(glue->phy); | 
 | err_phy_init: | 
 | 	if (musb->port_mode == MUSB_OTG) | 
 | 		mtk_otg_switch_exit(glue); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static u16 mtk_musb_get_toggle(struct musb_qh *qh, int is_out) | 
 | { | 
 | 	struct musb *musb = qh->hw_ep->musb; | 
 | 	u8 epnum = qh->hw_ep->epnum; | 
 | 	u16 toggle; | 
 |  | 
 | 	toggle = musb_readw(musb->mregs, is_out ? MUSB_TXTOG : MUSB_RXTOG); | 
 | 	return toggle & (1 << epnum); | 
 | } | 
 |  | 
 | static u16 mtk_musb_set_toggle(struct musb_qh *qh, int is_out, struct urb *urb) | 
 | { | 
 | 	struct musb *musb = qh->hw_ep->musb; | 
 | 	u8 epnum = qh->hw_ep->epnum; | 
 | 	u16 value, toggle; | 
 |  | 
 | 	toggle = usb_gettoggle(urb->dev, qh->epnum, is_out); | 
 |  | 
 | 	if (is_out) { | 
 | 		value = musb_readw(musb->mregs, MUSB_TXTOG); | 
 | 		value |= toggle << epnum; | 
 | 		musb_writew(musb->mregs, MUSB_TXTOG, value); | 
 | 	} else { | 
 | 		value = musb_readw(musb->mregs, MUSB_RXTOG); | 
 | 		value |= toggle << epnum; | 
 | 		musb_writew(musb->mregs, MUSB_RXTOG, value); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int mtk_musb_exit(struct musb *musb) | 
 | { | 
 | 	struct device *dev = musb->controller; | 
 | 	struct mtk_glue *glue = dev_get_drvdata(dev->parent); | 
 |  | 
 | 	mtk_otg_switch_exit(glue); | 
 | 	phy_power_off(glue->phy); | 
 | 	phy_exit(glue->phy); | 
 | 	mtk_musb_clks_disable(glue); | 
 |  | 
 | 	pm_runtime_put_sync(dev); | 
 | 	pm_runtime_disable(dev); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct musb_platform_ops mtk_musb_ops = { | 
 | 	.quirks = MUSB_DMA_INVENTRA, | 
 | 	.init = mtk_musb_init, | 
 | 	.get_toggle = mtk_musb_get_toggle, | 
 | 	.set_toggle = mtk_musb_set_toggle, | 
 | 	.exit = mtk_musb_exit, | 
 | #ifdef CONFIG_USB_INVENTRA_DMA | 
 | 	.dma_init = musbhs_dma_controller_create_noirq, | 
 | 	.dma_exit = musbhs_dma_controller_destroy, | 
 | #endif | 
 | 	.clearb = mtk_musb_clearb, | 
 | 	.clearw = mtk_musb_clearw, | 
 | 	.busctl_offset = mtk_musb_busctl_offset, | 
 | 	.set_mode = mtk_musb_set_mode, | 
 | }; | 
 |  | 
 | #define MTK_MUSB_MAX_EP_NUM	8 | 
 | #define MTK_MUSB_RAM_BITS	11 | 
 |  | 
 | static struct musb_fifo_cfg mtk_musb_mode_cfg[] = { | 
 | 	{ .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, | 
 | 	{ .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, | 
 | 	{ .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, | 
 | 	{ .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, }, | 
 | 	{ .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, }, | 
 | 	{ .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, }, | 
 | 	{ .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 512, }, | 
 | 	{ .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 512, }, | 
 | 	{ .hw_ep_num = 5, .style = FIFO_TX, .maxpacket = 512, }, | 
 | 	{ .hw_ep_num = 5, .style = FIFO_RX, .maxpacket = 512, }, | 
 | 	{ .hw_ep_num = 6, .style = FIFO_TX, .maxpacket = 1024, }, | 
 | 	{ .hw_ep_num = 6, .style = FIFO_RX, .maxpacket = 1024, }, | 
 | 	{ .hw_ep_num = 7, .style = FIFO_TX, .maxpacket = 512, }, | 
 | 	{ .hw_ep_num = 7, .style = FIFO_RX, .maxpacket = 64, }, | 
 | }; | 
 |  | 
 | static const struct musb_hdrc_config mtk_musb_hdrc_config = { | 
 | 	.fifo_cfg = mtk_musb_mode_cfg, | 
 | 	.fifo_cfg_size = ARRAY_SIZE(mtk_musb_mode_cfg), | 
 | 	.multipoint = true, | 
 | 	.dyn_fifo = true, | 
 | 	.num_eps = MTK_MUSB_MAX_EP_NUM, | 
 | 	.ram_bits = MTK_MUSB_RAM_BITS, | 
 | }; | 
 |  | 
 | static const struct platform_device_info mtk_dev_info = { | 
 | 	.name = "musb-hdrc", | 
 | 	.id = PLATFORM_DEVID_AUTO, | 
 | 	.dma_mask = DMA_BIT_MASK(32), | 
 | }; | 
 |  | 
 | static int mtk_musb_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct musb_hdrc_platform_data *pdata; | 
 | 	struct mtk_glue *glue; | 
 | 	struct platform_device_info pinfo; | 
 | 	struct device *dev = &pdev->dev; | 
 | 	struct device_node *np = dev->of_node; | 
 | 	int ret; | 
 |  | 
 | 	glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL); | 
 | 	if (!glue) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	glue->dev = dev; | 
 | 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); | 
 | 	if (!pdata) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	ret = of_platform_populate(np, NULL, NULL, dev); | 
 | 	if (ret) { | 
 | 		dev_err(dev, "failed to create child devices at %p\n", np); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = mtk_musb_clks_get(glue); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	pdata->config = &mtk_musb_hdrc_config; | 
 | 	pdata->platform_ops = &mtk_musb_ops; | 
 | 	pdata->mode = usb_get_dr_mode(dev); | 
 |  | 
 | 	if (IS_ENABLED(CONFIG_USB_MUSB_HOST)) | 
 | 		pdata->mode = USB_DR_MODE_HOST; | 
 | 	else if (IS_ENABLED(CONFIG_USB_MUSB_GADGET)) | 
 | 		pdata->mode = USB_DR_MODE_PERIPHERAL; | 
 |  | 
 | 	switch (pdata->mode) { | 
 | 	case USB_DR_MODE_HOST: | 
 | 		glue->phy_mode = PHY_MODE_USB_HOST; | 
 | 		glue->role = USB_ROLE_HOST; | 
 | 		break; | 
 | 	case USB_DR_MODE_PERIPHERAL: | 
 | 		glue->phy_mode = PHY_MODE_USB_DEVICE; | 
 | 		glue->role = USB_ROLE_DEVICE; | 
 | 		break; | 
 | 	case USB_DR_MODE_OTG: | 
 | 		glue->phy_mode = PHY_MODE_USB_OTG; | 
 | 		glue->role = USB_ROLE_NONE; | 
 | 		break; | 
 | 	default: | 
 | 		dev_err(&pdev->dev, "Error 'dr_mode' property\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	glue->phy = devm_of_phy_get_by_index(dev, np, 0); | 
 | 	if (IS_ERR(glue->phy)) { | 
 | 		dev_err(dev, "fail to getting phy %ld\n", | 
 | 			PTR_ERR(glue->phy)); | 
 | 		return PTR_ERR(glue->phy); | 
 | 	} | 
 |  | 
 | 	glue->usb_phy = usb_phy_generic_register(); | 
 | 	if (IS_ERR(glue->usb_phy)) { | 
 | 		dev_err(dev, "fail to registering usb-phy %ld\n", | 
 | 			PTR_ERR(glue->usb_phy)); | 
 | 		return PTR_ERR(glue->usb_phy); | 
 | 	} | 
 |  | 
 | 	glue->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); | 
 | 	if (IS_ERR(glue->xceiv)) { | 
 | 		ret = PTR_ERR(glue->xceiv); | 
 | 		dev_err(dev, "fail to getting usb-phy %d\n", ret); | 
 | 		goto err_unregister_usb_phy; | 
 | 	} | 
 |  | 
 | 	platform_set_drvdata(pdev, glue); | 
 | 	pm_runtime_enable(dev); | 
 | 	pm_runtime_get_sync(dev); | 
 |  | 
 | 	ret = mtk_musb_clks_enable(glue); | 
 | 	if (ret) | 
 | 		goto err_enable_clk; | 
 |  | 
 | 	pinfo = mtk_dev_info; | 
 | 	pinfo.parent = dev; | 
 | 	pinfo.res = pdev->resource; | 
 | 	pinfo.num_res = pdev->num_resources; | 
 | 	pinfo.data = pdata; | 
 | 	pinfo.size_data = sizeof(*pdata); | 
 |  | 
 | 	glue->musb_pdev = platform_device_register_full(&pinfo); | 
 | 	if (IS_ERR(glue->musb_pdev)) { | 
 | 		ret = PTR_ERR(glue->musb_pdev); | 
 | 		dev_err(dev, "failed to register musb device: %d\n", ret); | 
 | 		goto err_device_register; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_device_register: | 
 | 	mtk_musb_clks_disable(glue); | 
 | err_enable_clk: | 
 | 	pm_runtime_put_sync(dev); | 
 | 	pm_runtime_disable(dev); | 
 | err_unregister_usb_phy: | 
 | 	usb_phy_generic_unregister(glue->usb_phy); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int mtk_musb_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct mtk_glue *glue = platform_get_drvdata(pdev); | 
 | 	struct platform_device *usb_phy = glue->usb_phy; | 
 |  | 
 | 	platform_device_unregister(glue->musb_pdev); | 
 | 	usb_phy_generic_unregister(usb_phy); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | #ifdef CONFIG_OF | 
 | static const struct of_device_id mtk_musb_match[] = { | 
 | 	{.compatible = "mediatek,mtk-musb",}, | 
 | 	{}, | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, mtk_musb_match); | 
 | #endif | 
 |  | 
 | static struct platform_driver mtk_musb_driver = { | 
 | 	.probe = mtk_musb_probe, | 
 | 	.remove = mtk_musb_remove, | 
 | 	.driver = { | 
 | 		   .name = "musb-mtk", | 
 | 		   .of_match_table = of_match_ptr(mtk_musb_match), | 
 | 	}, | 
 | }; | 
 |  | 
 | module_platform_driver(mtk_musb_driver); | 
 |  | 
 | MODULE_DESCRIPTION("MediaTek MUSB Glue Layer"); | 
 | MODULE_AUTHOR("Min Guo <min.guo@mediatek.com>"); | 
 | MODULE_LICENSE("GPL v2"); |