| /* SPDX-License-Identifier: GPL-2.0 */ | 
 | /* | 
 |  *  thermal.h  ($Revision: 0 $) | 
 |  * | 
 |  *  Copyright (C) 2008  Intel Corp | 
 |  *  Copyright (C) 2008  Zhang Rui <rui.zhang@intel.com> | 
 |  *  Copyright (C) 2008  Sujith Thomas <sujith.thomas@intel.com> | 
 |  */ | 
 |  | 
 | #ifndef __THERMAL_H__ | 
 | #define __THERMAL_H__ | 
 |  | 
 | #include <linux/of.h> | 
 | #include <linux/idr.h> | 
 | #include <linux/device.h> | 
 | #include <linux/sysfs.h> | 
 | #include <linux/workqueue.h> | 
 | #include <uapi/linux/thermal.h> | 
 |  | 
 | /* invalid cooling state */ | 
 | #define THERMAL_CSTATE_INVALID -1UL | 
 |  | 
 | /* No upper/lower limit requirement */ | 
 | #define THERMAL_NO_LIMIT	((u32)~0) | 
 |  | 
 | /* Default weight of a bound cooling device */ | 
 | #define THERMAL_WEIGHT_DEFAULT 0 | 
 |  | 
 | /* use value, which < 0K, to indicate an invalid/uninitialized temperature */ | 
 | #define THERMAL_TEMP_INVALID	-274000 | 
 |  | 
 | struct thermal_zone_device; | 
 | struct thermal_cooling_device; | 
 | struct thermal_instance; | 
 | struct thermal_attr; | 
 |  | 
 | enum thermal_trend { | 
 | 	THERMAL_TREND_STABLE, /* temperature is stable */ | 
 | 	THERMAL_TREND_RAISING, /* temperature is raising */ | 
 | 	THERMAL_TREND_DROPPING, /* temperature is dropping */ | 
 | }; | 
 |  | 
 | /* Thermal notification reason */ | 
 | enum thermal_notify_event { | 
 | 	THERMAL_EVENT_UNSPECIFIED, /* Unspecified event */ | 
 | 	THERMAL_EVENT_TEMP_SAMPLE, /* New Temperature sample */ | 
 | 	THERMAL_TRIP_VIOLATED, /* TRIP Point violation */ | 
 | 	THERMAL_TRIP_CHANGED, /* TRIP Point temperature changed */ | 
 | 	THERMAL_DEVICE_DOWN, /* Thermal device is down */ | 
 | 	THERMAL_DEVICE_UP, /* Thermal device is up after a down event */ | 
 | 	THERMAL_DEVICE_POWER_CAPABILITY_CHANGED, /* power capability changed */ | 
 | 	THERMAL_TABLE_CHANGED, /* Thermal table(s) changed */ | 
 | 	THERMAL_EVENT_KEEP_ALIVE, /* Request for user space handler to respond */ | 
 | }; | 
 |  | 
 | /** | 
 |  * struct thermal_trip - representation of a point in temperature domain | 
 |  * @temperature: temperature value in miliCelsius | 
 |  * @hysteresis: relative hysteresis in miliCelsius | 
 |  * @type: trip point type | 
 |  * @priv: pointer to driver data associated with this trip | 
 |  */ | 
 | struct thermal_trip { | 
 | 	int temperature; | 
 | 	int hysteresis; | 
 | 	enum thermal_trip_type type; | 
 | 	void *priv; | 
 | }; | 
 |  | 
 | struct thermal_zone_device_ops { | 
 | 	int (*bind) (struct thermal_zone_device *, | 
 | 		     struct thermal_cooling_device *); | 
 | 	int (*unbind) (struct thermal_zone_device *, | 
 | 		       struct thermal_cooling_device *); | 
 | 	int (*get_temp) (struct thermal_zone_device *, int *); | 
 | 	int (*set_trips) (struct thermal_zone_device *, int, int); | 
 | 	int (*change_mode) (struct thermal_zone_device *, | 
 | 		enum thermal_device_mode); | 
 | 	int (*set_trip_temp) (struct thermal_zone_device *, int, int); | 
 | 	int (*set_trip_hyst) (struct thermal_zone_device *, int, int); | 
 | 	int (*get_crit_temp) (struct thermal_zone_device *, int *); | 
 | 	int (*set_emul_temp) (struct thermal_zone_device *, int); | 
 | 	int (*get_trend) (struct thermal_zone_device *, | 
 | 			  const struct thermal_trip *, enum thermal_trend *); | 
 | 	void (*hot)(struct thermal_zone_device *); | 
 | 	void (*critical)(struct thermal_zone_device *); | 
 | }; | 
 |  | 
 | struct thermal_cooling_device_ops { | 
 | 	int (*get_max_state) (struct thermal_cooling_device *, unsigned long *); | 
 | 	int (*get_cur_state) (struct thermal_cooling_device *, unsigned long *); | 
 | 	int (*set_cur_state) (struct thermal_cooling_device *, unsigned long); | 
 | 	int (*get_requested_power)(struct thermal_cooling_device *, u32 *); | 
 | 	int (*state2power)(struct thermal_cooling_device *, unsigned long, u32 *); | 
 | 	int (*power2state)(struct thermal_cooling_device *, u32, unsigned long *); | 
 | }; | 
 |  | 
 | struct thermal_cooling_device { | 
 | 	int id; | 
 | 	char *type; | 
 | 	unsigned long max_state; | 
 | 	struct device device; | 
 | 	struct device_node *np; | 
 | 	void *devdata; | 
 | 	void *stats; | 
 | 	const struct thermal_cooling_device_ops *ops; | 
 | 	bool updated; /* true if the cooling device does not need update */ | 
 | 	struct mutex lock; /* protect thermal_instances list */ | 
 | 	struct list_head thermal_instances; | 
 | 	struct list_head node; | 
 | }; | 
 |  | 
 | /** | 
 |  * struct thermal_zone_device - structure for a thermal zone | 
 |  * @id:		unique id number for each thermal zone | 
 |  * @type:	the thermal zone device type | 
 |  * @device:	&struct device for this thermal zone | 
 |  * @trip_temp_attrs:	attributes for trip points for sysfs: trip temperature | 
 |  * @trip_type_attrs:	attributes for trip points for sysfs: trip type | 
 |  * @trip_hyst_attrs:	attributes for trip points for sysfs: trip hysteresis | 
 |  * @mode:		current mode of this thermal zone | 
 |  * @devdata:	private pointer for device private data | 
 |  * @trips:	an array of struct thermal_trip | 
 |  * @num_trips:	number of trip points the thermal zone supports | 
 |  * @trips_disabled;	bitmap for disabled trips | 
 |  * @passive_delay_jiffies: number of jiffies to wait between polls when | 
 |  *			performing passive cooling. | 
 |  * @polling_delay_jiffies: number of jiffies to wait between polls when | 
 |  *			checking whether trip points have been crossed (0 for | 
 |  *			interrupt driven systems) | 
 |  * @temperature:	current temperature.  This is only for core code, | 
 |  *			drivers should use thermal_zone_get_temp() to get the | 
 |  *			current temperature | 
 |  * @last_temperature:	previous temperature read | 
 |  * @emul_temperature:	emulated temperature when using CONFIG_THERMAL_EMULATION | 
 |  * @passive:		1 if you've crossed a passive trip point, 0 otherwise. | 
 |  * @prev_low_trip:	the low current temperature if you've crossed a passive | 
 | 			trip point. | 
 |  * @prev_high_trip:	the above current temperature if you've crossed a | 
 | 			passive trip point. | 
 |  * @need_update:	if equals 1, thermal_zone_device_update needs to be invoked. | 
 |  * @ops:	operations this &thermal_zone_device supports | 
 |  * @tzp:	thermal zone parameters | 
 |  * @governor:	pointer to the governor for this thermal zone | 
 |  * @governor_data:	private pointer for governor data | 
 |  * @thermal_instances:	list of &struct thermal_instance of this thermal zone | 
 |  * @ida:	&struct ida to generate unique id for this zone's cooling | 
 |  *		devices | 
 |  * @lock:	lock to protect thermal_instances list | 
 |  * @node:	node in thermal_tz_list (in thermal_core.c) | 
 |  * @poll_queue:	delayed work for polling | 
 |  * @notify_event: Last notification event | 
 |  * @suspended: thermal zone suspend indicator | 
 |  */ | 
 | struct thermal_zone_device { | 
 | 	int id; | 
 | 	char type[THERMAL_NAME_LENGTH]; | 
 | 	struct device device; | 
 | 	struct attribute_group trips_attribute_group; | 
 | 	struct thermal_attr *trip_temp_attrs; | 
 | 	struct thermal_attr *trip_type_attrs; | 
 | 	struct thermal_attr *trip_hyst_attrs; | 
 | 	enum thermal_device_mode mode; | 
 | 	void *devdata; | 
 | 	struct thermal_trip *trips; | 
 | 	int num_trips; | 
 | 	unsigned long trips_disabled;	/* bitmap for disabled trips */ | 
 | 	unsigned long passive_delay_jiffies; | 
 | 	unsigned long polling_delay_jiffies; | 
 | 	int temperature; | 
 | 	int last_temperature; | 
 | 	int emul_temperature; | 
 | 	int passive; | 
 | 	int prev_low_trip; | 
 | 	int prev_high_trip; | 
 | 	atomic_t need_update; | 
 | 	struct thermal_zone_device_ops *ops; | 
 | 	struct thermal_zone_params *tzp; | 
 | 	struct thermal_governor *governor; | 
 | 	void *governor_data; | 
 | 	struct list_head thermal_instances; | 
 | 	struct ida ida; | 
 | 	struct mutex lock; | 
 | 	struct list_head node; | 
 | 	struct delayed_work poll_queue; | 
 | 	enum thermal_notify_event notify_event; | 
 | 	bool suspended; | 
 | }; | 
 |  | 
 | /** | 
 |  * struct thermal_governor - structure that holds thermal governor information | 
 |  * @name:	name of the governor | 
 |  * @bind_to_tz: callback called when binding to a thermal zone.  If it | 
 |  *		returns 0, the governor is bound to the thermal zone, | 
 |  *		otherwise it fails. | 
 |  * @unbind_from_tz:	callback called when a governor is unbound from a | 
 |  *			thermal zone. | 
 |  * @throttle:	callback called for every trip point even if temperature is | 
 |  *		below the trip point temperature | 
 |  * @governor_list:	node in thermal_governor_list (in thermal_core.c) | 
 |  */ | 
 | struct thermal_governor { | 
 | 	char name[THERMAL_NAME_LENGTH]; | 
 | 	int (*bind_to_tz)(struct thermal_zone_device *tz); | 
 | 	void (*unbind_from_tz)(struct thermal_zone_device *tz); | 
 | 	int (*throttle)(struct thermal_zone_device *tz, int trip); | 
 | 	struct list_head	governor_list; | 
 | }; | 
 |  | 
 | /* Structure to define Thermal Zone parameters */ | 
 | struct thermal_zone_params { | 
 | 	char governor_name[THERMAL_NAME_LENGTH]; | 
 |  | 
 | 	/* | 
 | 	 * a boolean to indicate if the thermal to hwmon sysfs interface | 
 | 	 * is required. when no_hwmon == false, a hwmon sysfs interface | 
 | 	 * will be created. when no_hwmon == true, nothing will be done | 
 | 	 */ | 
 | 	bool no_hwmon; | 
 |  | 
 | 	/* | 
 | 	 * Sustainable power (heat) that this thermal zone can dissipate in | 
 | 	 * mW | 
 | 	 */ | 
 | 	u32 sustainable_power; | 
 |  | 
 | 	/* | 
 | 	 * Proportional parameter of the PID controller when | 
 | 	 * overshooting (i.e., when temperature is below the target) | 
 | 	 */ | 
 | 	s32 k_po; | 
 |  | 
 | 	/* | 
 | 	 * Proportional parameter of the PID controller when | 
 | 	 * undershooting | 
 | 	 */ | 
 | 	s32 k_pu; | 
 |  | 
 | 	/* Integral parameter of the PID controller */ | 
 | 	s32 k_i; | 
 |  | 
 | 	/* Derivative parameter of the PID controller */ | 
 | 	s32 k_d; | 
 |  | 
 | 	/* threshold below which the error is no longer accumulated */ | 
 | 	s32 integral_cutoff; | 
 |  | 
 | 	/* | 
 | 	 * @slope:	slope of a linear temperature adjustment curve. | 
 | 	 * 		Used by thermal zone drivers. | 
 | 	 */ | 
 | 	int slope; | 
 | 	/* | 
 | 	 * @offset:	offset of a linear temperature adjustment curve. | 
 | 	 * 		Used by thermal zone drivers (default 0). | 
 | 	 */ | 
 | 	int offset; | 
 | }; | 
 |  | 
 | /* Function declarations */ | 
 | #ifdef CONFIG_THERMAL_OF | 
 | struct thermal_zone_device *devm_thermal_of_zone_register(struct device *dev, int id, void *data, | 
 | 							  const struct thermal_zone_device_ops *ops); | 
 |  | 
 | void devm_thermal_of_zone_unregister(struct device *dev, struct thermal_zone_device *tz); | 
 |  | 
 | #else | 
 |  | 
 | static inline | 
 | struct thermal_zone_device *devm_thermal_of_zone_register(struct device *dev, int id, void *data, | 
 | 							  const struct thermal_zone_device_ops *ops) | 
 | { | 
 | 	return ERR_PTR(-ENOTSUPP); | 
 | } | 
 |  | 
 | static inline void devm_thermal_of_zone_unregister(struct device *dev, | 
 | 						   struct thermal_zone_device *tz) | 
 | { | 
 | } | 
 | #endif | 
 |  | 
 | int __thermal_zone_get_trip(struct thermal_zone_device *tz, int trip_id, | 
 | 			    struct thermal_trip *trip); | 
 | int thermal_zone_get_trip(struct thermal_zone_device *tz, int trip_id, | 
 | 			  struct thermal_trip *trip); | 
 |  | 
 | int thermal_zone_set_trip(struct thermal_zone_device *tz, int trip_id, | 
 | 			  const struct thermal_trip *trip); | 
 |  | 
 | int for_each_thermal_trip(struct thermal_zone_device *tz, | 
 | 			  int (*cb)(struct thermal_trip *, void *), | 
 | 			  void *data); | 
 | int thermal_zone_get_num_trips(struct thermal_zone_device *tz); | 
 |  | 
 | int thermal_zone_get_crit_temp(struct thermal_zone_device *tz, int *temp); | 
 |  | 
 | #ifdef CONFIG_THERMAL_ACPI | 
 | int thermal_acpi_active_trip_temp(struct acpi_device *adev, int id, int *ret_temp); | 
 | int thermal_acpi_passive_trip_temp(struct acpi_device *adev, int *ret_temp); | 
 | int thermal_acpi_hot_trip_temp(struct acpi_device *adev, int *ret_temp); | 
 | int thermal_acpi_critical_trip_temp(struct acpi_device *adev, int *ret_temp); | 
 | #endif | 
 |  | 
 | #ifdef CONFIG_THERMAL | 
 | struct thermal_zone_device *thermal_zone_device_register_with_trips( | 
 | 					const char *type, | 
 | 					struct thermal_trip *trips, | 
 | 					int num_trips, int mask, | 
 | 					void *devdata, | 
 | 					struct thermal_zone_device_ops *ops, | 
 | 					const struct thermal_zone_params *tzp, | 
 | 					int passive_delay, int polling_delay); | 
 |  | 
 | struct thermal_zone_device *thermal_tripless_zone_device_register( | 
 | 					const char *type, | 
 | 					void *devdata, | 
 | 					struct thermal_zone_device_ops *ops, | 
 | 					const struct thermal_zone_params *tzp); | 
 |  | 
 | void thermal_zone_device_unregister(struct thermal_zone_device *tz); | 
 |  | 
 | void *thermal_zone_device_priv(struct thermal_zone_device *tzd); | 
 | const char *thermal_zone_device_type(struct thermal_zone_device *tzd); | 
 | int thermal_zone_device_id(struct thermal_zone_device *tzd); | 
 | struct device *thermal_zone_device(struct thermal_zone_device *tzd); | 
 |  | 
 | int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int, | 
 | 				     struct thermal_cooling_device *, | 
 | 				     unsigned long, unsigned long, | 
 | 				     unsigned int); | 
 | int thermal_zone_unbind_cooling_device(struct thermal_zone_device *, int, | 
 | 				       struct thermal_cooling_device *); | 
 | void thermal_zone_device_update(struct thermal_zone_device *, | 
 | 				enum thermal_notify_event); | 
 | void thermal_zone_device_exec(struct thermal_zone_device *tz, | 
 | 			      void (*cb)(struct thermal_zone_device *, | 
 | 					 unsigned long), | 
 | 			      unsigned long data); | 
 |  | 
 | struct thermal_cooling_device *thermal_cooling_device_register(const char *, | 
 | 		void *, const struct thermal_cooling_device_ops *); | 
 | struct thermal_cooling_device * | 
 | thermal_of_cooling_device_register(struct device_node *np, const char *, void *, | 
 | 				   const struct thermal_cooling_device_ops *); | 
 | struct thermal_cooling_device * | 
 | devm_thermal_of_cooling_device_register(struct device *dev, | 
 | 				struct device_node *np, | 
 | 				char *type, void *devdata, | 
 | 				const struct thermal_cooling_device_ops *ops); | 
 | void thermal_cooling_device_update(struct thermal_cooling_device *); | 
 | void thermal_cooling_device_unregister(struct thermal_cooling_device *); | 
 | struct thermal_zone_device *thermal_zone_get_zone_by_name(const char *name); | 
 | int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp); | 
 | int thermal_zone_get_slope(struct thermal_zone_device *tz); | 
 | int thermal_zone_get_offset(struct thermal_zone_device *tz); | 
 |  | 
 | int thermal_zone_device_enable(struct thermal_zone_device *tz); | 
 | int thermal_zone_device_disable(struct thermal_zone_device *tz); | 
 | void thermal_zone_device_critical(struct thermal_zone_device *tz); | 
 | #else | 
 | static inline struct thermal_zone_device *thermal_zone_device_register_with_trips( | 
 | 					const char *type, | 
 | 					struct thermal_trip *trips, | 
 | 					int num_trips, int mask, | 
 | 					void *devdata, | 
 | 					struct thermal_zone_device_ops *ops, | 
 | 					const struct thermal_zone_params *tzp, | 
 | 					int passive_delay, int polling_delay) | 
 | { return ERR_PTR(-ENODEV); } | 
 |  | 
 | static inline struct thermal_zone_device *thermal_tripless_zone_device_register( | 
 | 					const char *type, | 
 | 					void *devdata, | 
 | 					struct thermal_zone_device_ops *ops, | 
 | 					const struct thermal_zone_params *tzp) | 
 | { return ERR_PTR(-ENODEV); } | 
 |  | 
 | static inline void thermal_zone_device_unregister(struct thermal_zone_device *tz) | 
 | { } | 
 |  | 
 | static inline struct thermal_cooling_device * | 
 | thermal_cooling_device_register(const char *type, void *devdata, | 
 | 	const struct thermal_cooling_device_ops *ops) | 
 | { return ERR_PTR(-ENODEV); } | 
 | static inline struct thermal_cooling_device * | 
 | thermal_of_cooling_device_register(struct device_node *np, | 
 | 	const char *type, void *devdata, | 
 | 	const struct thermal_cooling_device_ops *ops) | 
 | { return ERR_PTR(-ENODEV); } | 
 | static inline struct thermal_cooling_device * | 
 | devm_thermal_of_cooling_device_register(struct device *dev, | 
 | 				struct device_node *np, | 
 | 				char *type, void *devdata, | 
 | 				const struct thermal_cooling_device_ops *ops) | 
 | { | 
 | 	return ERR_PTR(-ENODEV); | 
 | } | 
 | static inline void thermal_cooling_device_unregister( | 
 | 	struct thermal_cooling_device *cdev) | 
 | { } | 
 | static inline struct thermal_zone_device *thermal_zone_get_zone_by_name( | 
 | 		const char *name) | 
 | { return ERR_PTR(-ENODEV); } | 
 | static inline int thermal_zone_get_temp( | 
 | 		struct thermal_zone_device *tz, int *temp) | 
 | { return -ENODEV; } | 
 | static inline int thermal_zone_get_slope( | 
 | 		struct thermal_zone_device *tz) | 
 | { return -ENODEV; } | 
 | static inline int thermal_zone_get_offset( | 
 | 		struct thermal_zone_device *tz) | 
 | { return -ENODEV; } | 
 |  | 
 | static inline void *thermal_zone_device_priv(struct thermal_zone_device *tz) | 
 | { | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static inline const char *thermal_zone_device_type(struct thermal_zone_device *tzd) | 
 | { | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static inline int thermal_zone_device_id(struct thermal_zone_device *tzd) | 
 | { | 
 | 	return -ENODEV; | 
 | } | 
 |  | 
 | static inline int thermal_zone_device_enable(struct thermal_zone_device *tz) | 
 | { return -ENODEV; } | 
 |  | 
 | static inline int thermal_zone_device_disable(struct thermal_zone_device *tz) | 
 | { return -ENODEV; } | 
 | #endif /* CONFIG_THERMAL */ | 
 |  | 
 | #endif /* __THERMAL_H__ */ |