|  | /****************************************************************************** | 
|  | * | 
|  | * Copyright(c) 2003 - 2014 Intel Corporation. All rights reserved. | 
|  | * Copyright(c) 2015 Intel Deutschland GmbH | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms of version 2 of the GNU General Public License as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but WITHOUT | 
|  | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
|  | * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
|  | * more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License along with | 
|  | * this program; if not, write to the Free Software Foundation, Inc., | 
|  | * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA | 
|  | * | 
|  | * The full GNU General Public License is included in this distribution in the | 
|  | * file called LICENSE. | 
|  | * | 
|  | * Contact Information: | 
|  | * Intel Linux Wireless <linuxwifi@intel.com> | 
|  | * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | 
|  | * | 
|  | *****************************************************************************/ | 
|  |  | 
|  | #include <linux/etherdevice.h> | 
|  | #include "iwl-trans.h" | 
|  | #include "iwl-modparams.h" | 
|  | #include "dev.h" | 
|  | #include "agn.h" | 
|  | #include "calib.h" | 
|  |  | 
|  | /* | 
|  | * initialize rxon structure with default values from eeprom | 
|  | */ | 
|  | void iwl_connection_init_rx_config(struct iwl_priv *priv, | 
|  | struct iwl_rxon_context *ctx) | 
|  | { | 
|  | memset(&ctx->staging, 0, sizeof(ctx->staging)); | 
|  |  | 
|  | if (!ctx->vif) { | 
|  | ctx->staging.dev_type = ctx->unused_devtype; | 
|  | } else | 
|  | switch (ctx->vif->type) { | 
|  | case NL80211_IFTYPE_AP: | 
|  | ctx->staging.dev_type = ctx->ap_devtype; | 
|  | break; | 
|  |  | 
|  | case NL80211_IFTYPE_STATION: | 
|  | ctx->staging.dev_type = ctx->station_devtype; | 
|  | ctx->staging.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK; | 
|  | break; | 
|  |  | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | ctx->staging.dev_type = ctx->ibss_devtype; | 
|  | ctx->staging.flags = RXON_FLG_SHORT_PREAMBLE_MSK; | 
|  | ctx->staging.filter_flags = RXON_FILTER_BCON_AWARE_MSK | | 
|  | RXON_FILTER_ACCEPT_GRP_MSK; | 
|  | break; | 
|  |  | 
|  | case NL80211_IFTYPE_MONITOR: | 
|  | ctx->staging.dev_type = RXON_DEV_TYPE_SNIFFER; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | IWL_ERR(priv, "Unsupported interface type %d\n", | 
|  | ctx->vif->type); | 
|  | break; | 
|  | } | 
|  |  | 
|  | #if 0 | 
|  | /* TODO:  Figure out when short_preamble would be set and cache from | 
|  | * that */ | 
|  | if (!hw_to_local(priv->hw)->short_preamble) | 
|  | ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; | 
|  | else | 
|  | ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; | 
|  | #endif | 
|  |  | 
|  | ctx->staging.channel = | 
|  | cpu_to_le16(priv->hw->conf.chandef.chan->hw_value); | 
|  | priv->band = priv->hw->conf.chandef.chan->band; | 
|  |  | 
|  | iwl_set_flags_for_band(priv, ctx, priv->band, ctx->vif); | 
|  |  | 
|  | /* clear both MIX and PURE40 mode flag */ | 
|  | ctx->staging.flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED | | 
|  | RXON_FLG_CHANNEL_MODE_PURE_40); | 
|  | if (ctx->vif) | 
|  | memcpy(ctx->staging.node_addr, ctx->vif->addr, ETH_ALEN); | 
|  |  | 
|  | ctx->staging.ofdm_ht_single_stream_basic_rates = 0xff; | 
|  | ctx->staging.ofdm_ht_dual_stream_basic_rates = 0xff; | 
|  | ctx->staging.ofdm_ht_triple_stream_basic_rates = 0xff; | 
|  | } | 
|  |  | 
|  | static int iwlagn_disable_bss(struct iwl_priv *priv, | 
|  | struct iwl_rxon_context *ctx, | 
|  | struct iwl_rxon_cmd *send) | 
|  | { | 
|  | __le32 old_filter = send->filter_flags; | 
|  | int ret; | 
|  |  | 
|  | send->filter_flags &= ~RXON_FILTER_ASSOC_MSK; | 
|  | ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_cmd, | 
|  | 0, sizeof(*send), send); | 
|  |  | 
|  | send->filter_flags = old_filter; | 
|  |  | 
|  | if (ret) | 
|  | IWL_DEBUG_QUIET_RFKILL(priv, | 
|  | "Error clearing ASSOC_MSK on BSS (%d)\n", ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int iwlagn_disable_pan(struct iwl_priv *priv, | 
|  | struct iwl_rxon_context *ctx, | 
|  | struct iwl_rxon_cmd *send) | 
|  | { | 
|  | struct iwl_notification_wait disable_wait; | 
|  | __le32 old_filter = send->filter_flags; | 
|  | u8 old_dev_type = send->dev_type; | 
|  | int ret; | 
|  | static const u16 deactivate_cmd[] = { | 
|  | REPLY_WIPAN_DEACTIVATION_COMPLETE | 
|  | }; | 
|  |  | 
|  | iwl_init_notification_wait(&priv->notif_wait, &disable_wait, | 
|  | deactivate_cmd, ARRAY_SIZE(deactivate_cmd), | 
|  | NULL, NULL); | 
|  |  | 
|  | send->filter_flags &= ~RXON_FILTER_ASSOC_MSK; | 
|  | send->dev_type = RXON_DEV_TYPE_P2P; | 
|  | ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_cmd, | 
|  | 0, sizeof(*send), send); | 
|  |  | 
|  | send->filter_flags = old_filter; | 
|  | send->dev_type = old_dev_type; | 
|  |  | 
|  | if (ret) { | 
|  | IWL_ERR(priv, "Error disabling PAN (%d)\n", ret); | 
|  | iwl_remove_notification(&priv->notif_wait, &disable_wait); | 
|  | } else { | 
|  | ret = iwl_wait_notification(&priv->notif_wait, | 
|  | &disable_wait, HZ); | 
|  | if (ret) | 
|  | IWL_ERR(priv, "Timed out waiting for PAN disable\n"); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int iwlagn_disconn_pan(struct iwl_priv *priv, | 
|  | struct iwl_rxon_context *ctx, | 
|  | struct iwl_rxon_cmd *send) | 
|  | { | 
|  | __le32 old_filter = send->filter_flags; | 
|  | int ret; | 
|  |  | 
|  | send->filter_flags &= ~RXON_FILTER_ASSOC_MSK; | 
|  | ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_cmd, 0, | 
|  | sizeof(*send), send); | 
|  |  | 
|  | send->filter_flags = old_filter; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void iwlagn_update_qos(struct iwl_priv *priv, | 
|  | struct iwl_rxon_context *ctx) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | if (!ctx->is_active) | 
|  | return; | 
|  |  | 
|  | ctx->qos_data.def_qos_parm.qos_flags = 0; | 
|  |  | 
|  | if (ctx->qos_data.qos_active) | 
|  | ctx->qos_data.def_qos_parm.qos_flags |= | 
|  | QOS_PARAM_FLG_UPDATE_EDCA_MSK; | 
|  |  | 
|  | if (ctx->ht.enabled) | 
|  | ctx->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK; | 
|  |  | 
|  | IWL_DEBUG_INFO(priv, "send QoS cmd with Qos active=%d FLAGS=0x%X\n", | 
|  | ctx->qos_data.qos_active, | 
|  | ctx->qos_data.def_qos_parm.qos_flags); | 
|  |  | 
|  | ret = iwl_dvm_send_cmd_pdu(priv, ctx->qos_cmd, 0, | 
|  | sizeof(struct iwl_qosparam_cmd), | 
|  | &ctx->qos_data.def_qos_parm); | 
|  | if (ret) | 
|  | IWL_DEBUG_QUIET_RFKILL(priv, "Failed to update QoS\n"); | 
|  | } | 
|  |  | 
|  | static int iwlagn_update_beacon(struct iwl_priv *priv, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | lockdep_assert_held(&priv->mutex); | 
|  |  | 
|  | dev_kfree_skb(priv->beacon_skb); | 
|  | priv->beacon_skb = ieee80211_beacon_get(priv->hw, vif); | 
|  | if (!priv->beacon_skb) | 
|  | return -ENOMEM; | 
|  | return iwlagn_send_beacon_cmd(priv); | 
|  | } | 
|  |  | 
|  | static int iwlagn_send_rxon_assoc(struct iwl_priv *priv, | 
|  | struct iwl_rxon_context *ctx) | 
|  | { | 
|  | int ret = 0; | 
|  | struct iwl_rxon_assoc_cmd rxon_assoc; | 
|  | const struct iwl_rxon_cmd *rxon1 = &ctx->staging; | 
|  | const struct iwl_rxon_cmd *rxon2 = &ctx->active; | 
|  |  | 
|  | if ((rxon1->flags == rxon2->flags) && | 
|  | (rxon1->filter_flags == rxon2->filter_flags) && | 
|  | (rxon1->cck_basic_rates == rxon2->cck_basic_rates) && | 
|  | (rxon1->ofdm_ht_single_stream_basic_rates == | 
|  | rxon2->ofdm_ht_single_stream_basic_rates) && | 
|  | (rxon1->ofdm_ht_dual_stream_basic_rates == | 
|  | rxon2->ofdm_ht_dual_stream_basic_rates) && | 
|  | (rxon1->ofdm_ht_triple_stream_basic_rates == | 
|  | rxon2->ofdm_ht_triple_stream_basic_rates) && | 
|  | (rxon1->acquisition_data == rxon2->acquisition_data) && | 
|  | (rxon1->rx_chain == rxon2->rx_chain) && | 
|  | (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) { | 
|  | IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC.  Not resending.\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | rxon_assoc.flags = ctx->staging.flags; | 
|  | rxon_assoc.filter_flags = ctx->staging.filter_flags; | 
|  | rxon_assoc.ofdm_basic_rates = ctx->staging.ofdm_basic_rates; | 
|  | rxon_assoc.cck_basic_rates = ctx->staging.cck_basic_rates; | 
|  | rxon_assoc.reserved1 = 0; | 
|  | rxon_assoc.reserved2 = 0; | 
|  | rxon_assoc.reserved3 = 0; | 
|  | rxon_assoc.ofdm_ht_single_stream_basic_rates = | 
|  | ctx->staging.ofdm_ht_single_stream_basic_rates; | 
|  | rxon_assoc.ofdm_ht_dual_stream_basic_rates = | 
|  | ctx->staging.ofdm_ht_dual_stream_basic_rates; | 
|  | rxon_assoc.rx_chain_select_flags = ctx->staging.rx_chain; | 
|  | rxon_assoc.ofdm_ht_triple_stream_basic_rates = | 
|  | ctx->staging.ofdm_ht_triple_stream_basic_rates; | 
|  | rxon_assoc.acquisition_data = ctx->staging.acquisition_data; | 
|  |  | 
|  | ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_assoc_cmd, | 
|  | CMD_ASYNC, sizeof(rxon_assoc), &rxon_assoc); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static u16 iwl_adjust_beacon_interval(u16 beacon_val, u16 max_beacon_val) | 
|  | { | 
|  | u16 new_val; | 
|  | u16 beacon_factor; | 
|  |  | 
|  | /* | 
|  | * If mac80211 hasn't given us a beacon interval, program | 
|  | * the default into the device (not checking this here | 
|  | * would cause the adjustment below to return the maximum | 
|  | * value, which may break PAN.) | 
|  | */ | 
|  | if (!beacon_val) | 
|  | return DEFAULT_BEACON_INTERVAL; | 
|  |  | 
|  | /* | 
|  | * If the beacon interval we obtained from the peer | 
|  | * is too large, we'll have to wake up more often | 
|  | * (and in IBSS case, we'll beacon too much) | 
|  | * | 
|  | * For example, if max_beacon_val is 4096, and the | 
|  | * requested beacon interval is 7000, we'll have to | 
|  | * use 3500 to be able to wake up on the beacons. | 
|  | * | 
|  | * This could badly influence beacon detection stats. | 
|  | */ | 
|  |  | 
|  | beacon_factor = (beacon_val + max_beacon_val) / max_beacon_val; | 
|  | new_val = beacon_val / beacon_factor; | 
|  |  | 
|  | if (!new_val) | 
|  | new_val = max_beacon_val; | 
|  |  | 
|  | return new_val; | 
|  | } | 
|  |  | 
|  | static int iwl_send_rxon_timing(struct iwl_priv *priv, | 
|  | struct iwl_rxon_context *ctx) | 
|  | { | 
|  | u64 tsf; | 
|  | s32 interval_tm, rem; | 
|  | struct ieee80211_conf *conf = NULL; | 
|  | u16 beacon_int; | 
|  | struct ieee80211_vif *vif = ctx->vif; | 
|  |  | 
|  | conf = &priv->hw->conf; | 
|  |  | 
|  | lockdep_assert_held(&priv->mutex); | 
|  |  | 
|  | memset(&ctx->timing, 0, sizeof(struct iwl_rxon_time_cmd)); | 
|  |  | 
|  | ctx->timing.timestamp = cpu_to_le64(priv->timestamp); | 
|  | ctx->timing.listen_interval = cpu_to_le16(conf->listen_interval); | 
|  |  | 
|  | beacon_int = vif ? vif->bss_conf.beacon_int : 0; | 
|  |  | 
|  | /* | 
|  | * TODO: For IBSS we need to get atim_window from mac80211, | 
|  | *	 for now just always use 0 | 
|  | */ | 
|  | ctx->timing.atim_window = 0; | 
|  |  | 
|  | if (ctx->ctxid == IWL_RXON_CTX_PAN && | 
|  | (!ctx->vif || ctx->vif->type != NL80211_IFTYPE_STATION) && | 
|  | iwl_is_associated(priv, IWL_RXON_CTX_BSS) && | 
|  | priv->contexts[IWL_RXON_CTX_BSS].vif && | 
|  | priv->contexts[IWL_RXON_CTX_BSS].vif->bss_conf.beacon_int) { | 
|  | ctx->timing.beacon_interval = | 
|  | priv->contexts[IWL_RXON_CTX_BSS].timing.beacon_interval; | 
|  | beacon_int = le16_to_cpu(ctx->timing.beacon_interval); | 
|  | } else if (ctx->ctxid == IWL_RXON_CTX_BSS && | 
|  | iwl_is_associated(priv, IWL_RXON_CTX_PAN) && | 
|  | priv->contexts[IWL_RXON_CTX_PAN].vif && | 
|  | priv->contexts[IWL_RXON_CTX_PAN].vif->bss_conf.beacon_int && | 
|  | (!iwl_is_associated_ctx(ctx) || !ctx->vif || | 
|  | !ctx->vif->bss_conf.beacon_int)) { | 
|  | ctx->timing.beacon_interval = | 
|  | priv->contexts[IWL_RXON_CTX_PAN].timing.beacon_interval; | 
|  | beacon_int = le16_to_cpu(ctx->timing.beacon_interval); | 
|  | } else { | 
|  | beacon_int = iwl_adjust_beacon_interval(beacon_int, | 
|  | IWL_MAX_UCODE_BEACON_INTERVAL * TIME_UNIT); | 
|  | ctx->timing.beacon_interval = cpu_to_le16(beacon_int); | 
|  | } | 
|  |  | 
|  | ctx->beacon_int = beacon_int; | 
|  |  | 
|  | tsf = priv->timestamp; /* tsf is modifed by do_div: copy it */ | 
|  | interval_tm = beacon_int * TIME_UNIT; | 
|  | rem = do_div(tsf, interval_tm); | 
|  | ctx->timing.beacon_init_val = cpu_to_le32(interval_tm - rem); | 
|  |  | 
|  | ctx->timing.dtim_period = vif ? (vif->bss_conf.dtim_period ?: 1) : 1; | 
|  |  | 
|  | IWL_DEBUG_ASSOC(priv, | 
|  | "beacon interval %d beacon timer %d beacon tim %d\n", | 
|  | le16_to_cpu(ctx->timing.beacon_interval), | 
|  | le32_to_cpu(ctx->timing.beacon_init_val), | 
|  | le16_to_cpu(ctx->timing.atim_window)); | 
|  |  | 
|  | return iwl_dvm_send_cmd_pdu(priv, ctx->rxon_timing_cmd, | 
|  | 0, sizeof(ctx->timing), &ctx->timing); | 
|  | } | 
|  |  | 
|  | static int iwlagn_rxon_disconn(struct iwl_priv *priv, | 
|  | struct iwl_rxon_context *ctx) | 
|  | { | 
|  | int ret; | 
|  | struct iwl_rxon_cmd *active = (void *)&ctx->active; | 
|  |  | 
|  | if (ctx->ctxid == IWL_RXON_CTX_BSS) { | 
|  | ret = iwlagn_disable_bss(priv, ctx, &ctx->staging); | 
|  | } else { | 
|  | ret = iwlagn_disable_pan(priv, ctx, &ctx->staging); | 
|  | if (ret) | 
|  | return ret; | 
|  | if (ctx->vif) { | 
|  | ret = iwl_send_rxon_timing(priv, ctx); | 
|  | if (ret) { | 
|  | IWL_ERR(priv, "Failed to send timing (%d)!\n", ret); | 
|  | return ret; | 
|  | } | 
|  | ret = iwlagn_disconn_pan(priv, ctx, &ctx->staging); | 
|  | } | 
|  | } | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* | 
|  | * Un-assoc RXON clears the station table and WEP | 
|  | * keys, so we have to restore those afterwards. | 
|  | */ | 
|  | iwl_clear_ucode_stations(priv, ctx); | 
|  | /* update -- might need P2P now */ | 
|  | iwl_update_bcast_station(priv, ctx); | 
|  | iwl_restore_stations(priv, ctx); | 
|  | ret = iwl_restore_default_wep_keys(priv, ctx); | 
|  | if (ret) { | 
|  | IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | memcpy(active, &ctx->staging, sizeof(*active)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force) | 
|  | { | 
|  | int ret; | 
|  | s8 prev_tx_power; | 
|  | bool defer; | 
|  | struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS]; | 
|  |  | 
|  | if (priv->calib_disabled & IWL_TX_POWER_CALIB_DISABLED) | 
|  | return 0; | 
|  |  | 
|  | lockdep_assert_held(&priv->mutex); | 
|  |  | 
|  | if (priv->tx_power_user_lmt == tx_power && !force) | 
|  | return 0; | 
|  |  | 
|  | if (tx_power < IWLAGN_TX_POWER_TARGET_POWER_MIN) { | 
|  | IWL_WARN(priv, | 
|  | "Requested user TXPOWER %d below lower limit %d.\n", | 
|  | tx_power, | 
|  | IWLAGN_TX_POWER_TARGET_POWER_MIN); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (tx_power > DIV_ROUND_UP(priv->nvm_data->max_tx_pwr_half_dbm, 2)) { | 
|  | IWL_WARN(priv, | 
|  | "Requested user TXPOWER %d above upper limit %d.\n", | 
|  | tx_power, priv->nvm_data->max_tx_pwr_half_dbm); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (!iwl_is_ready_rf(priv)) | 
|  | return -EIO; | 
|  |  | 
|  | /* scan complete and commit_rxon use tx_power_next value, | 
|  | * it always need to be updated for newest request */ | 
|  | priv->tx_power_next = tx_power; | 
|  |  | 
|  | /* do not set tx power when scanning or channel changing */ | 
|  | defer = test_bit(STATUS_SCANNING, &priv->status) || | 
|  | memcmp(&ctx->active, &ctx->staging, sizeof(ctx->staging)); | 
|  | if (defer && !force) { | 
|  | IWL_DEBUG_INFO(priv, "Deferring tx power set\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | prev_tx_power = priv->tx_power_user_lmt; | 
|  | priv->tx_power_user_lmt = tx_power; | 
|  |  | 
|  | ret = iwlagn_send_tx_power(priv); | 
|  |  | 
|  | /* if fail to set tx_power, restore the orig. tx power */ | 
|  | if (ret) { | 
|  | priv->tx_power_user_lmt = prev_tx_power; | 
|  | priv->tx_power_next = prev_tx_power; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int iwlagn_rxon_connect(struct iwl_priv *priv, | 
|  | struct iwl_rxon_context *ctx) | 
|  | { | 
|  | int ret; | 
|  | struct iwl_rxon_cmd *active = (void *)&ctx->active; | 
|  |  | 
|  | /* RXON timing must be before associated RXON */ | 
|  | if (ctx->ctxid == IWL_RXON_CTX_BSS) { | 
|  | ret = iwl_send_rxon_timing(priv, ctx); | 
|  | if (ret) { | 
|  | IWL_ERR(priv, "Failed to send timing (%d)!\n", ret); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  | /* QoS info may be cleared by previous un-assoc RXON */ | 
|  | iwlagn_update_qos(priv, ctx); | 
|  |  | 
|  | /* | 
|  | * We'll run into this code path when beaconing is | 
|  | * enabled, but then we also need to send the beacon | 
|  | * to the device. | 
|  | */ | 
|  | if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_AP)) { | 
|  | ret = iwlagn_update_beacon(priv, ctx->vif); | 
|  | if (ret) { | 
|  | IWL_ERR(priv, | 
|  | "Error sending required beacon (%d)!\n", | 
|  | ret); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | priv->start_calib = 0; | 
|  | /* | 
|  | * Apply the new configuration. | 
|  | * | 
|  | * Associated RXON doesn't clear the station table in uCode, | 
|  | * so we don't need to restore stations etc. after this. | 
|  | */ | 
|  | ret = iwl_dvm_send_cmd_pdu(priv, ctx->rxon_cmd, 0, | 
|  | sizeof(struct iwl_rxon_cmd), &ctx->staging); | 
|  | if (ret) { | 
|  | IWL_ERR(priv, "Error setting new RXON (%d)\n", ret); | 
|  | return ret; | 
|  | } | 
|  | memcpy(active, &ctx->staging, sizeof(*active)); | 
|  |  | 
|  | /* IBSS beacon needs to be sent after setting assoc */ | 
|  | if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_ADHOC)) | 
|  | if (iwlagn_update_beacon(priv, ctx->vif)) | 
|  | IWL_ERR(priv, "Error sending IBSS beacon\n"); | 
|  | iwl_init_sensitivity(priv); | 
|  |  | 
|  | /* | 
|  | * If we issue a new RXON command which required a tune then | 
|  | * we must send a new TXPOWER command or we won't be able to | 
|  | * Tx any frames. | 
|  | * | 
|  | * It's expected we set power here if channel is changing. | 
|  | */ | 
|  | ret = iwl_set_tx_power(priv, priv->tx_power_next, true); | 
|  | if (ret) { | 
|  | IWL_ERR(priv, "Error sending TX power (%d)\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int iwlagn_set_pan_params(struct iwl_priv *priv) | 
|  | { | 
|  | struct iwl_wipan_params_cmd cmd; | 
|  | struct iwl_rxon_context *ctx_bss, *ctx_pan; | 
|  | int slot0 = 300, slot1 = 0; | 
|  | int ret; | 
|  |  | 
|  | if (priv->valid_contexts == BIT(IWL_RXON_CTX_BSS)) | 
|  | return 0; | 
|  |  | 
|  | BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2); | 
|  |  | 
|  | lockdep_assert_held(&priv->mutex); | 
|  |  | 
|  | ctx_bss = &priv->contexts[IWL_RXON_CTX_BSS]; | 
|  | ctx_pan = &priv->contexts[IWL_RXON_CTX_PAN]; | 
|  |  | 
|  | /* | 
|  | * If the PAN context is inactive, then we don't need | 
|  | * to update the PAN parameters, the last thing we'll | 
|  | * have done before it goes inactive is making the PAN | 
|  | * parameters be WLAN-only. | 
|  | */ | 
|  | if (!ctx_pan->is_active) | 
|  | return 0; | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  |  | 
|  | /* only 2 slots are currently allowed */ | 
|  | cmd.num_slots = 2; | 
|  |  | 
|  | cmd.slots[0].type = 0; /* BSS */ | 
|  | cmd.slots[1].type = 1; /* PAN */ | 
|  |  | 
|  | if (ctx_bss->vif && ctx_pan->vif) { | 
|  | int bcnint = ctx_pan->beacon_int; | 
|  | int dtim = ctx_pan->vif->bss_conf.dtim_period ?: 1; | 
|  |  | 
|  | /* should be set, but seems unused?? */ | 
|  | cmd.flags |= cpu_to_le16(IWL_WIPAN_PARAMS_FLG_SLOTTED_MODE); | 
|  |  | 
|  | if (ctx_pan->vif->type == NL80211_IFTYPE_AP && | 
|  | bcnint && | 
|  | bcnint != ctx_bss->beacon_int) { | 
|  | IWL_ERR(priv, | 
|  | "beacon intervals don't match (%d, %d)\n", | 
|  | ctx_bss->beacon_int, ctx_pan->beacon_int); | 
|  | } else | 
|  | bcnint = max_t(int, bcnint, | 
|  | ctx_bss->beacon_int); | 
|  | if (!bcnint) | 
|  | bcnint = DEFAULT_BEACON_INTERVAL; | 
|  | slot0 = bcnint / 2; | 
|  | slot1 = bcnint - slot0; | 
|  |  | 
|  | if (test_bit(STATUS_SCAN_HW, &priv->status) || | 
|  | (!ctx_bss->vif->bss_conf.idle && | 
|  | !ctx_bss->vif->bss_conf.assoc)) { | 
|  | slot0 = dtim * bcnint * 3 - IWL_MIN_SLOT_TIME; | 
|  | slot1 = IWL_MIN_SLOT_TIME; | 
|  | } else if (!ctx_pan->vif->bss_conf.idle && | 
|  | !ctx_pan->vif->bss_conf.assoc) { | 
|  | slot1 = dtim * bcnint * 3 - IWL_MIN_SLOT_TIME; | 
|  | slot0 = IWL_MIN_SLOT_TIME; | 
|  | } | 
|  | } else if (ctx_pan->vif) { | 
|  | slot0 = 0; | 
|  | slot1 = max_t(int, 1, ctx_pan->vif->bss_conf.dtim_period) * | 
|  | ctx_pan->beacon_int; | 
|  | slot1 = max_t(int, DEFAULT_BEACON_INTERVAL, slot1); | 
|  |  | 
|  | if (test_bit(STATUS_SCAN_HW, &priv->status)) { | 
|  | slot0 = slot1 * 3 - IWL_MIN_SLOT_TIME; | 
|  | slot1 = IWL_MIN_SLOT_TIME; | 
|  | } | 
|  | } | 
|  |  | 
|  | cmd.slots[0].width = cpu_to_le16(slot0); | 
|  | cmd.slots[1].width = cpu_to_le16(slot1); | 
|  |  | 
|  | ret = iwl_dvm_send_cmd_pdu(priv, REPLY_WIPAN_PARAMS, 0, | 
|  | sizeof(cmd), &cmd); | 
|  | if (ret) | 
|  | IWL_ERR(priv, "Error setting PAN parameters (%d)\n", ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void _iwl_set_rxon_ht(struct iwl_priv *priv, | 
|  | struct iwl_ht_config *ht_conf, | 
|  | struct iwl_rxon_context *ctx) | 
|  | { | 
|  | struct iwl_rxon_cmd *rxon = &ctx->staging; | 
|  |  | 
|  | if (!ctx->ht.enabled) { | 
|  | rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK | | 
|  | RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK | | 
|  | RXON_FLG_HT40_PROT_MSK | | 
|  | RXON_FLG_HT_PROT_MSK); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* FIXME: if the definition of ht.protection changed, the "translation" | 
|  | * will be needed for rxon->flags | 
|  | */ | 
|  | rxon->flags |= cpu_to_le32(ctx->ht.protection << | 
|  | RXON_FLG_HT_OPERATING_MODE_POS); | 
|  |  | 
|  | /* Set up channel bandwidth: | 
|  | * 20 MHz only, 20/40 mixed or pure 40 if ht40 ok */ | 
|  | /* clear the HT channel mode before set the mode */ | 
|  | rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK | | 
|  | RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK); | 
|  | if (iwl_is_ht40_tx_allowed(priv, ctx, NULL)) { | 
|  | /* pure ht40 */ | 
|  | if (ctx->ht.protection == | 
|  | IEEE80211_HT_OP_MODE_PROTECTION_20MHZ) { | 
|  | rxon->flags |= RXON_FLG_CHANNEL_MODE_PURE_40; | 
|  | /* | 
|  | * Note: control channel is opposite of extension | 
|  | * channel | 
|  | */ | 
|  | switch (ctx->ht.extension_chan_offset) { | 
|  | case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: | 
|  | rxon->flags &= | 
|  | ~RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK; | 
|  | break; | 
|  | case IEEE80211_HT_PARAM_CHA_SEC_BELOW: | 
|  | rxon->flags |= | 
|  | RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK; | 
|  | break; | 
|  | } | 
|  | } else { | 
|  | /* | 
|  | * Note: control channel is opposite of extension | 
|  | * channel | 
|  | */ | 
|  | switch (ctx->ht.extension_chan_offset) { | 
|  | case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: | 
|  | rxon->flags &= | 
|  | ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK); | 
|  | rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED; | 
|  | break; | 
|  | case IEEE80211_HT_PARAM_CHA_SEC_BELOW: | 
|  | rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK; | 
|  | rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED; | 
|  | break; | 
|  | case IEEE80211_HT_PARAM_CHA_SEC_NONE: | 
|  | default: | 
|  | /* | 
|  | * channel location only valid if in Mixed | 
|  | * mode | 
|  | */ | 
|  | IWL_ERR(priv, | 
|  | "invalid extension channel offset\n"); | 
|  | break; | 
|  | } | 
|  | } | 
|  | } else { | 
|  | rxon->flags |= RXON_FLG_CHANNEL_MODE_LEGACY; | 
|  | } | 
|  |  | 
|  | iwlagn_set_rxon_chain(priv, ctx); | 
|  |  | 
|  | IWL_DEBUG_ASSOC(priv, "rxon flags 0x%X operation mode :0x%X " | 
|  | "extension channel offset 0x%x\n", | 
|  | le32_to_cpu(rxon->flags), ctx->ht.protection, | 
|  | ctx->ht.extension_chan_offset); | 
|  | } | 
|  |  | 
|  | void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf) | 
|  | { | 
|  | struct iwl_rxon_context *ctx; | 
|  |  | 
|  | for_each_context(priv, ctx) | 
|  | _iwl_set_rxon_ht(priv, ht_conf, ctx); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_set_rxon_channel - Set the band and channel values in staging RXON | 
|  | * @ch: requested channel as a pointer to struct ieee80211_channel | 
|  |  | 
|  | * NOTE:  Does not commit to the hardware; it sets appropriate bit fields | 
|  | * in the staging RXON flag structure based on the ch->band | 
|  | */ | 
|  | void iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch, | 
|  | struct iwl_rxon_context *ctx) | 
|  | { | 
|  | enum nl80211_band band = ch->band; | 
|  | u16 channel = ch->hw_value; | 
|  |  | 
|  | if ((le16_to_cpu(ctx->staging.channel) == channel) && | 
|  | (priv->band == band)) | 
|  | return; | 
|  |  | 
|  | ctx->staging.channel = cpu_to_le16(channel); | 
|  | if (band == NL80211_BAND_5GHZ) | 
|  | ctx->staging.flags &= ~RXON_FLG_BAND_24G_MSK; | 
|  | else | 
|  | ctx->staging.flags |= RXON_FLG_BAND_24G_MSK; | 
|  |  | 
|  | priv->band = band; | 
|  |  | 
|  | IWL_DEBUG_INFO(priv, "Staging channel set to %d [%d]\n", channel, band); | 
|  |  | 
|  | } | 
|  |  | 
|  | void iwl_set_flags_for_band(struct iwl_priv *priv, | 
|  | struct iwl_rxon_context *ctx, | 
|  | enum nl80211_band band, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | if (band == NL80211_BAND_5GHZ) { | 
|  | ctx->staging.flags &= | 
|  | ~(RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK | 
|  | | RXON_FLG_CCK_MSK); | 
|  | ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; | 
|  | } else { | 
|  | /* Copied from iwl_post_associate() */ | 
|  | if (vif && vif->bss_conf.use_short_slot) | 
|  | ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; | 
|  | else | 
|  | ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK; | 
|  |  | 
|  | ctx->staging.flags |= RXON_FLG_BAND_24G_MSK; | 
|  | ctx->staging.flags |= RXON_FLG_AUTO_DETECT_MSK; | 
|  | ctx->staging.flags &= ~RXON_FLG_CCK_MSK; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, | 
|  | struct iwl_rxon_context *ctx, int hw_decrypt) | 
|  | { | 
|  | struct iwl_rxon_cmd *rxon = &ctx->staging; | 
|  |  | 
|  | if (hw_decrypt) | 
|  | rxon->filter_flags &= ~RXON_FILTER_DIS_DECRYPT_MSK; | 
|  | else | 
|  | rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK; | 
|  |  | 
|  | } | 
|  |  | 
|  | /* validate RXON structure is valid */ | 
|  | static int iwl_check_rxon_cmd(struct iwl_priv *priv, | 
|  | struct iwl_rxon_context *ctx) | 
|  | { | 
|  | struct iwl_rxon_cmd *rxon = &ctx->staging; | 
|  | u32 errors = 0; | 
|  |  | 
|  | if (rxon->flags & RXON_FLG_BAND_24G_MSK) { | 
|  | if (rxon->flags & RXON_FLG_TGJ_NARROW_BAND_MSK) { | 
|  | IWL_WARN(priv, "check 2.4G: wrong narrow\n"); | 
|  | errors |= BIT(0); | 
|  | } | 
|  | if (rxon->flags & RXON_FLG_RADAR_DETECT_MSK) { | 
|  | IWL_WARN(priv, "check 2.4G: wrong radar\n"); | 
|  | errors |= BIT(1); | 
|  | } | 
|  | } else { | 
|  | if (!(rxon->flags & RXON_FLG_SHORT_SLOT_MSK)) { | 
|  | IWL_WARN(priv, "check 5.2G: not short slot!\n"); | 
|  | errors |= BIT(2); | 
|  | } | 
|  | if (rxon->flags & RXON_FLG_CCK_MSK) { | 
|  | IWL_WARN(priv, "check 5.2G: CCK!\n"); | 
|  | errors |= BIT(3); | 
|  | } | 
|  | } | 
|  | if ((rxon->node_addr[0] | rxon->bssid_addr[0]) & 0x1) { | 
|  | IWL_WARN(priv, "mac/bssid mcast!\n"); | 
|  | errors |= BIT(4); | 
|  | } | 
|  |  | 
|  | /* make sure basic rates 6Mbps and 1Mbps are supported */ | 
|  | if ((rxon->ofdm_basic_rates & IWL_RATE_6M_MASK) == 0 && | 
|  | (rxon->cck_basic_rates & IWL_RATE_1M_MASK) == 0) { | 
|  | IWL_WARN(priv, "neither 1 nor 6 are basic\n"); | 
|  | errors |= BIT(5); | 
|  | } | 
|  |  | 
|  | if (le16_to_cpu(rxon->assoc_id) > 2007) { | 
|  | IWL_WARN(priv, "aid > 2007\n"); | 
|  | errors |= BIT(6); | 
|  | } | 
|  |  | 
|  | if ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)) | 
|  | == (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)) { | 
|  | IWL_WARN(priv, "CCK and short slot\n"); | 
|  | errors |= BIT(7); | 
|  | } | 
|  |  | 
|  | if ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)) | 
|  | == (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)) { | 
|  | IWL_WARN(priv, "CCK and auto detect\n"); | 
|  | errors |= BIT(8); | 
|  | } | 
|  |  | 
|  | if ((rxon->flags & (RXON_FLG_AUTO_DETECT_MSK | | 
|  | RXON_FLG_TGG_PROTECT_MSK)) == | 
|  | RXON_FLG_TGG_PROTECT_MSK) { | 
|  | IWL_WARN(priv, "TGg but no auto-detect\n"); | 
|  | errors |= BIT(9); | 
|  | } | 
|  |  | 
|  | if (rxon->channel == 0) { | 
|  | IWL_WARN(priv, "zero channel is invalid\n"); | 
|  | errors |= BIT(10); | 
|  | } | 
|  |  | 
|  | WARN(errors, "Invalid RXON (%#x), channel %d", | 
|  | errors, le16_to_cpu(rxon->channel)); | 
|  |  | 
|  | return errors ? -EINVAL : 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwl_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed | 
|  | * @priv: staging_rxon is compared to active_rxon | 
|  | * | 
|  | * If the RXON structure is changing enough to require a new tune, | 
|  | * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that | 
|  | * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required. | 
|  | */ | 
|  | static int iwl_full_rxon_required(struct iwl_priv *priv, | 
|  | struct iwl_rxon_context *ctx) | 
|  | { | 
|  | const struct iwl_rxon_cmd *staging = &ctx->staging; | 
|  | const struct iwl_rxon_cmd *active = &ctx->active; | 
|  |  | 
|  | #define CHK(cond)							\ | 
|  | if ((cond)) {							\ | 
|  | IWL_DEBUG_INFO(priv, "need full RXON - " #cond "\n");	\ | 
|  | return 1;						\ | 
|  | } | 
|  |  | 
|  | #define CHK_NEQ(c1, c2)						\ | 
|  | if ((c1) != (c2)) {					\ | 
|  | IWL_DEBUG_INFO(priv, "need full RXON - "	\ | 
|  | #c1 " != " #c2 " - %d != %d\n",	\ | 
|  | (c1), (c2));			\ | 
|  | return 1;					\ | 
|  | } | 
|  |  | 
|  | /* These items are only settable from the full RXON command */ | 
|  | CHK(!iwl_is_associated_ctx(ctx)); | 
|  | CHK(!ether_addr_equal(staging->bssid_addr, active->bssid_addr)); | 
|  | CHK(!ether_addr_equal(staging->node_addr, active->node_addr)); | 
|  | CHK(!ether_addr_equal(staging->wlap_bssid_addr, | 
|  | active->wlap_bssid_addr)); | 
|  | CHK_NEQ(staging->dev_type, active->dev_type); | 
|  | CHK_NEQ(staging->channel, active->channel); | 
|  | CHK_NEQ(staging->air_propagation, active->air_propagation); | 
|  | CHK_NEQ(staging->ofdm_ht_single_stream_basic_rates, | 
|  | active->ofdm_ht_single_stream_basic_rates); | 
|  | CHK_NEQ(staging->ofdm_ht_dual_stream_basic_rates, | 
|  | active->ofdm_ht_dual_stream_basic_rates); | 
|  | CHK_NEQ(staging->ofdm_ht_triple_stream_basic_rates, | 
|  | active->ofdm_ht_triple_stream_basic_rates); | 
|  | CHK_NEQ(staging->assoc_id, active->assoc_id); | 
|  |  | 
|  | /* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can | 
|  | * be updated with the RXON_ASSOC command -- however only some | 
|  | * flag transitions are allowed using RXON_ASSOC */ | 
|  |  | 
|  | /* Check if we are not switching bands */ | 
|  | CHK_NEQ(staging->flags & RXON_FLG_BAND_24G_MSK, | 
|  | active->flags & RXON_FLG_BAND_24G_MSK); | 
|  |  | 
|  | /* Check if we are switching association toggle */ | 
|  | CHK_NEQ(staging->filter_flags & RXON_FILTER_ASSOC_MSK, | 
|  | active->filter_flags & RXON_FILTER_ASSOC_MSK); | 
|  |  | 
|  | #undef CHK | 
|  | #undef CHK_NEQ | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_IWLWIFI_DEBUG | 
|  | void iwl_print_rx_config_cmd(struct iwl_priv *priv, | 
|  | enum iwl_rxon_context_id ctxid) | 
|  | { | 
|  | struct iwl_rxon_context *ctx = &priv->contexts[ctxid]; | 
|  | struct iwl_rxon_cmd *rxon = &ctx->staging; | 
|  |  | 
|  | IWL_DEBUG_RADIO(priv, "RX CONFIG:\n"); | 
|  | iwl_print_hex_dump(priv, IWL_DL_RADIO, (u8 *) rxon, sizeof(*rxon)); | 
|  | IWL_DEBUG_RADIO(priv, "u16 channel: 0x%x\n", | 
|  | le16_to_cpu(rxon->channel)); | 
|  | IWL_DEBUG_RADIO(priv, "u32 flags: 0x%08X\n", | 
|  | le32_to_cpu(rxon->flags)); | 
|  | IWL_DEBUG_RADIO(priv, "u32 filter_flags: 0x%08x\n", | 
|  | le32_to_cpu(rxon->filter_flags)); | 
|  | IWL_DEBUG_RADIO(priv, "u8 dev_type: 0x%x\n", rxon->dev_type); | 
|  | IWL_DEBUG_RADIO(priv, "u8 ofdm_basic_rates: 0x%02x\n", | 
|  | rxon->ofdm_basic_rates); | 
|  | IWL_DEBUG_RADIO(priv, "u8 cck_basic_rates: 0x%02x\n", | 
|  | rxon->cck_basic_rates); | 
|  | IWL_DEBUG_RADIO(priv, "u8[6] node_addr: %pM\n", rxon->node_addr); | 
|  | IWL_DEBUG_RADIO(priv, "u8[6] bssid_addr: %pM\n", rxon->bssid_addr); | 
|  | IWL_DEBUG_RADIO(priv, "u16 assoc_id: 0x%x\n", | 
|  | le16_to_cpu(rxon->assoc_id)); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static void iwl_calc_basic_rates(struct iwl_priv *priv, | 
|  | struct iwl_rxon_context *ctx) | 
|  | { | 
|  | int lowest_present_ofdm = 100; | 
|  | int lowest_present_cck = 100; | 
|  | u8 cck = 0; | 
|  | u8 ofdm = 0; | 
|  |  | 
|  | if (ctx->vif) { | 
|  | struct ieee80211_supported_band *sband; | 
|  | unsigned long basic = ctx->vif->bss_conf.basic_rates; | 
|  | int i; | 
|  |  | 
|  | sband = priv->hw->wiphy->bands[priv->hw->conf.chandef.chan->band]; | 
|  |  | 
|  | for_each_set_bit(i, &basic, BITS_PER_LONG) { | 
|  | int hw = sband->bitrates[i].hw_value; | 
|  | if (hw >= IWL_FIRST_OFDM_RATE) { | 
|  | ofdm |= BIT(hw - IWL_FIRST_OFDM_RATE); | 
|  | if (lowest_present_ofdm > hw) | 
|  | lowest_present_ofdm = hw; | 
|  | } else { | 
|  | BUILD_BUG_ON(IWL_FIRST_CCK_RATE != 0); | 
|  |  | 
|  | cck |= BIT(hw); | 
|  | if (lowest_present_cck > hw) | 
|  | lowest_present_cck = hw; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Now we've got the basic rates as bitmaps in the ofdm and cck | 
|  | * variables. This isn't sufficient though, as there might not | 
|  | * be all the right rates in the bitmap. E.g. if the only basic | 
|  | * rates are 5.5 Mbps and 11 Mbps, we still need to add 1 Mbps | 
|  | * and 6 Mbps because the 802.11-2007 standard says in 9.6: | 
|  | * | 
|  | *    [...] a STA responding to a received frame shall transmit | 
|  | *    its Control Response frame [...] at the highest rate in the | 
|  | *    BSSBasicRateSet parameter that is less than or equal to the | 
|  | *    rate of the immediately previous frame in the frame exchange | 
|  | *    sequence ([...]) and that is of the same modulation class | 
|  | *    ([...]) as the received frame. If no rate contained in the | 
|  | *    BSSBasicRateSet parameter meets these conditions, then the | 
|  | *    control frame sent in response to a received frame shall be | 
|  | *    transmitted at the highest mandatory rate of the PHY that is | 
|  | *    less than or equal to the rate of the received frame, and | 
|  | *    that is of the same modulation class as the received frame. | 
|  | * | 
|  | * As a consequence, we need to add all mandatory rates that are | 
|  | * lower than all of the basic rates to these bitmaps. | 
|  | */ | 
|  |  | 
|  | if (IWL_RATE_24M_INDEX < lowest_present_ofdm) | 
|  | ofdm |= IWL_RATE_24M_MASK >> IWL_FIRST_OFDM_RATE; | 
|  | if (IWL_RATE_12M_INDEX < lowest_present_ofdm) | 
|  | ofdm |= IWL_RATE_12M_MASK >> IWL_FIRST_OFDM_RATE; | 
|  | /* 6M already there or needed so always add */ | 
|  | ofdm |= IWL_RATE_6M_MASK >> IWL_FIRST_OFDM_RATE; | 
|  |  | 
|  | /* | 
|  | * CCK is a bit more complex with DSSS vs. HR/DSSS vs. ERP. | 
|  | * Note, however: | 
|  | *  - if no CCK rates are basic, it must be ERP since there must | 
|  | *    be some basic rates at all, so they're OFDM => ERP PHY | 
|  | *    (or we're in 5 GHz, and the cck bitmap will never be used) | 
|  | *  - if 11M is a basic rate, it must be ERP as well, so add 5.5M | 
|  | *  - if 5.5M is basic, 1M and 2M are mandatory | 
|  | *  - if 2M is basic, 1M is mandatory | 
|  | *  - if 1M is basic, that's the only valid ACK rate. | 
|  | * As a consequence, it's not as complicated as it sounds, just add | 
|  | * any lower rates to the ACK rate bitmap. | 
|  | */ | 
|  | if (IWL_RATE_11M_INDEX < lowest_present_cck) | 
|  | cck |= IWL_RATE_11M_MASK >> IWL_FIRST_CCK_RATE; | 
|  | if (IWL_RATE_5M_INDEX < lowest_present_cck) | 
|  | cck |= IWL_RATE_5M_MASK >> IWL_FIRST_CCK_RATE; | 
|  | if (IWL_RATE_2M_INDEX < lowest_present_cck) | 
|  | cck |= IWL_RATE_2M_MASK >> IWL_FIRST_CCK_RATE; | 
|  | /* 1M already there or needed so always add */ | 
|  | cck |= IWL_RATE_1M_MASK >> IWL_FIRST_CCK_RATE; | 
|  |  | 
|  | IWL_DEBUG_RATE(priv, "Set basic rates cck:0x%.2x ofdm:0x%.2x\n", | 
|  | cck, ofdm); | 
|  |  | 
|  | /* "basic_rates" is a misnomer here -- should be called ACK rates */ | 
|  | ctx->staging.cck_basic_rates = cck; | 
|  | ctx->staging.ofdm_basic_rates = ofdm; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * iwlagn_commit_rxon - commit staging_rxon to hardware | 
|  | * | 
|  | * The RXON command in staging_rxon is committed to the hardware and | 
|  | * the active_rxon structure is updated with the new data.  This | 
|  | * function correctly transitions out of the RXON_ASSOC_MSK state if | 
|  | * a HW tune is required based on the RXON structure changes. | 
|  | * | 
|  | * The connect/disconnect flow should be as the following: | 
|  | * | 
|  | * 1. make sure send RXON command with association bit unset if not connect | 
|  | *	this should include the channel and the band for the candidate | 
|  | *	to be connected to | 
|  | * 2. Add Station before RXON association with the AP | 
|  | * 3. RXON_timing has to send before RXON for connection | 
|  | * 4. full RXON command - associated bit set | 
|  | * 5. use RXON_ASSOC command to update any flags changes | 
|  | */ | 
|  | int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx) | 
|  | { | 
|  | /* cast away the const for active_rxon in this function */ | 
|  | struct iwl_rxon_cmd *active = (void *)&ctx->active; | 
|  | bool new_assoc = !!(ctx->staging.filter_flags & RXON_FILTER_ASSOC_MSK); | 
|  | int ret; | 
|  |  | 
|  | lockdep_assert_held(&priv->mutex); | 
|  |  | 
|  | if (!iwl_is_alive(priv)) | 
|  | return -EBUSY; | 
|  |  | 
|  | /* This function hardcodes a bunch of dual-mode assumptions */ | 
|  | BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2); | 
|  |  | 
|  | if (!ctx->is_active) | 
|  | return 0; | 
|  |  | 
|  | /* always get timestamp with Rx frame */ | 
|  | ctx->staging.flags |= RXON_FLG_TSF2HOST_MSK; | 
|  |  | 
|  | /* recalculate basic rates */ | 
|  | iwl_calc_basic_rates(priv, ctx); | 
|  |  | 
|  | /* | 
|  | * force CTS-to-self frames protection if RTS-CTS is not preferred | 
|  | * one aggregation protection method | 
|  | */ | 
|  | if (!priv->hw_params.use_rts_for_aggregation) | 
|  | ctx->staging.flags |= RXON_FLG_SELF_CTS_EN; | 
|  |  | 
|  | if ((ctx->vif && ctx->vif->bss_conf.use_short_slot) || | 
|  | !(ctx->staging.flags & RXON_FLG_BAND_24G_MSK)) | 
|  | ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK; | 
|  | else | 
|  | ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK; | 
|  |  | 
|  | iwl_print_rx_config_cmd(priv, ctx->ctxid); | 
|  | ret = iwl_check_rxon_cmd(priv, ctx); | 
|  | if (ret) { | 
|  | IWL_ERR(priv, "Invalid RXON configuration. Not committing.\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * receive commit_rxon request | 
|  | * abort any previous channel switch if still in process | 
|  | */ | 
|  | if (test_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status) && | 
|  | (priv->switch_channel != ctx->staging.channel)) { | 
|  | IWL_DEBUG_11H(priv, "abort channel switch on %d\n", | 
|  | le16_to_cpu(priv->switch_channel)); | 
|  | iwl_chswitch_done(priv, false); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If we don't need to send a full RXON, we can use | 
|  | * iwl_rxon_assoc_cmd which is used to reconfigure filter | 
|  | * and other flags for the current radio configuration. | 
|  | */ | 
|  | if (!iwl_full_rxon_required(priv, ctx)) { | 
|  | ret = iwlagn_send_rxon_assoc(priv, ctx); | 
|  | if (ret) { | 
|  | IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | memcpy(active, &ctx->staging, sizeof(*active)); | 
|  | /* | 
|  | * We do not commit tx power settings while channel changing, | 
|  | * do it now if after settings changed. | 
|  | */ | 
|  | iwl_set_tx_power(priv, priv->tx_power_next, false); | 
|  |  | 
|  | /* make sure we are in the right PS state */ | 
|  | iwl_power_update_mode(priv, true); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | iwl_set_rxon_hwcrypto(priv, ctx, !iwlwifi_mod_params.swcrypto); | 
|  |  | 
|  | IWL_DEBUG_INFO(priv, | 
|  | "Going to commit RXON\n" | 
|  | "  * with%s RXON_FILTER_ASSOC_MSK\n" | 
|  | "  * channel = %d\n" | 
|  | "  * bssid = %pM\n", | 
|  | (new_assoc ? "" : "out"), | 
|  | le16_to_cpu(ctx->staging.channel), | 
|  | ctx->staging.bssid_addr); | 
|  |  | 
|  | /* | 
|  | * Always clear associated first, but with the correct config. | 
|  | * This is required as for example station addition for the | 
|  | * AP station must be done after the BSSID is set to correctly | 
|  | * set up filters in the device. | 
|  | */ | 
|  | ret = iwlagn_rxon_disconn(priv, ctx); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = iwlagn_set_pan_params(priv); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (new_assoc) | 
|  | return iwlagn_rxon_connect(priv, ctx); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void iwlagn_config_ht40(struct ieee80211_conf *conf, | 
|  | struct iwl_rxon_context *ctx) | 
|  | { | 
|  | if (conf_is_ht40_minus(conf)) { | 
|  | ctx->ht.extension_chan_offset = | 
|  | IEEE80211_HT_PARAM_CHA_SEC_BELOW; | 
|  | ctx->ht.is_40mhz = true; | 
|  | } else if (conf_is_ht40_plus(conf)) { | 
|  | ctx->ht.extension_chan_offset = | 
|  | IEEE80211_HT_PARAM_CHA_SEC_ABOVE; | 
|  | ctx->ht.is_40mhz = true; | 
|  | } else { | 
|  | ctx->ht.extension_chan_offset = | 
|  | IEEE80211_HT_PARAM_CHA_SEC_NONE; | 
|  | ctx->ht.is_40mhz = false; | 
|  | } | 
|  | } | 
|  |  | 
|  | int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); | 
|  | struct iwl_rxon_context *ctx; | 
|  | struct ieee80211_conf *conf = &hw->conf; | 
|  | struct ieee80211_channel *channel = conf->chandef.chan; | 
|  | int ret = 0; | 
|  |  | 
|  | IWL_DEBUG_MAC80211(priv, "enter: changed %#x\n", changed); | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | if (unlikely(test_bit(STATUS_SCANNING, &priv->status))) { | 
|  | IWL_DEBUG_MAC80211(priv, "leave - scanning\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (!iwl_is_ready(priv)) { | 
|  | IWL_DEBUG_MAC80211(priv, "leave - not ready\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (changed & (IEEE80211_CONF_CHANGE_SMPS | | 
|  | IEEE80211_CONF_CHANGE_CHANNEL)) { | 
|  | /* mac80211 uses static for non-HT which is what we want */ | 
|  | priv->current_ht_config.smps = conf->smps_mode; | 
|  |  | 
|  | /* | 
|  | * Recalculate chain counts. | 
|  | * | 
|  | * If monitor mode is enabled then mac80211 will | 
|  | * set up the SM PS mode to OFF if an HT channel is | 
|  | * configured. | 
|  | */ | 
|  | for_each_context(priv, ctx) | 
|  | iwlagn_set_rxon_chain(priv, ctx); | 
|  | } | 
|  |  | 
|  | if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { | 
|  | for_each_context(priv, ctx) { | 
|  | /* Configure HT40 channels */ | 
|  | if (ctx->ht.enabled != conf_is_ht(conf)) | 
|  | ctx->ht.enabled = conf_is_ht(conf); | 
|  |  | 
|  | if (ctx->ht.enabled) { | 
|  | /* if HT40 is used, it should not change | 
|  | * after associated except channel switch */ | 
|  | if (!ctx->ht.is_40mhz || | 
|  | !iwl_is_associated_ctx(ctx)) | 
|  | iwlagn_config_ht40(conf, ctx); | 
|  | } else | 
|  | ctx->ht.is_40mhz = false; | 
|  |  | 
|  | /* | 
|  | * Default to no protection. Protection mode will | 
|  | * later be set from BSS config in iwl_ht_conf | 
|  | */ | 
|  | ctx->ht.protection = IEEE80211_HT_OP_MODE_PROTECTION_NONE; | 
|  |  | 
|  | /* if we are switching from ht to 2.4 clear flags | 
|  | * from any ht related info since 2.4 does not | 
|  | * support ht */ | 
|  | if (le16_to_cpu(ctx->staging.channel) != | 
|  | channel->hw_value) | 
|  | ctx->staging.flags = 0; | 
|  |  | 
|  | iwl_set_rxon_channel(priv, channel, ctx); | 
|  | iwl_set_rxon_ht(priv, &priv->current_ht_config); | 
|  |  | 
|  | iwl_set_flags_for_band(priv, ctx, channel->band, | 
|  | ctx->vif); | 
|  | } | 
|  |  | 
|  | iwl_update_bcast_stations(priv); | 
|  | } | 
|  |  | 
|  | if (changed & (IEEE80211_CONF_CHANGE_PS | | 
|  | IEEE80211_CONF_CHANGE_IDLE)) { | 
|  | ret = iwl_power_update_mode(priv, false); | 
|  | if (ret) | 
|  | IWL_DEBUG_MAC80211(priv, "Error setting sleep level\n"); | 
|  | } | 
|  |  | 
|  | if (changed & IEEE80211_CONF_CHANGE_POWER) { | 
|  | IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n", | 
|  | priv->tx_power_user_lmt, conf->power_level); | 
|  |  | 
|  | iwl_set_tx_power(priv, conf->power_level, false); | 
|  | } | 
|  |  | 
|  | for_each_context(priv, ctx) { | 
|  | if (!memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging))) | 
|  | continue; | 
|  | iwlagn_commit_rxon(priv, ctx); | 
|  | } | 
|  | out: | 
|  | mutex_unlock(&priv->mutex); | 
|  | IWL_DEBUG_MAC80211(priv, "leave\n"); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void iwlagn_check_needed_chains(struct iwl_priv *priv, | 
|  | struct iwl_rxon_context *ctx, | 
|  | struct ieee80211_bss_conf *bss_conf) | 
|  | { | 
|  | struct ieee80211_vif *vif = ctx->vif; | 
|  | struct iwl_rxon_context *tmp; | 
|  | struct ieee80211_sta *sta; | 
|  | struct iwl_ht_config *ht_conf = &priv->current_ht_config; | 
|  | struct ieee80211_sta_ht_cap *ht_cap; | 
|  | bool need_multiple; | 
|  |  | 
|  | lockdep_assert_held(&priv->mutex); | 
|  |  | 
|  | switch (vif->type) { | 
|  | case NL80211_IFTYPE_STATION: | 
|  | rcu_read_lock(); | 
|  | sta = ieee80211_find_sta(vif, bss_conf->bssid); | 
|  | if (!sta) { | 
|  | /* | 
|  | * If at all, this can only happen through a race | 
|  | * when the AP disconnects us while we're still | 
|  | * setting up the connection, in that case mac80211 | 
|  | * will soon tell us about that. | 
|  | */ | 
|  | need_multiple = false; | 
|  | rcu_read_unlock(); | 
|  | break; | 
|  | } | 
|  |  | 
|  | ht_cap = &sta->ht_cap; | 
|  |  | 
|  | need_multiple = true; | 
|  |  | 
|  | /* | 
|  | * If the peer advertises no support for receiving 2 and 3 | 
|  | * stream MCS rates, it can't be transmitting them either. | 
|  | */ | 
|  | if (ht_cap->mcs.rx_mask[1] == 0 && | 
|  | ht_cap->mcs.rx_mask[2] == 0) { | 
|  | need_multiple = false; | 
|  | } else if (!(ht_cap->mcs.tx_params & | 
|  | IEEE80211_HT_MCS_TX_DEFINED)) { | 
|  | /* If it can't TX MCS at all ... */ | 
|  | need_multiple = false; | 
|  | } else if (ht_cap->mcs.tx_params & | 
|  | IEEE80211_HT_MCS_TX_RX_DIFF) { | 
|  | int maxstreams; | 
|  |  | 
|  | /* | 
|  | * But if it can receive them, it might still not | 
|  | * be able to transmit them, which is what we need | 
|  | * to check here -- so check the number of streams | 
|  | * it advertises for TX (if different from RX). | 
|  | */ | 
|  |  | 
|  | maxstreams = (ht_cap->mcs.tx_params & | 
|  | IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK); | 
|  | maxstreams >>= | 
|  | IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT; | 
|  | maxstreams += 1; | 
|  |  | 
|  | if (maxstreams <= 1) | 
|  | need_multiple = false; | 
|  | } | 
|  |  | 
|  | rcu_read_unlock(); | 
|  | break; | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | /* currently */ | 
|  | need_multiple = false; | 
|  | break; | 
|  | default: | 
|  | /* only AP really */ | 
|  | need_multiple = true; | 
|  | break; | 
|  | } | 
|  |  | 
|  | ctx->ht_need_multiple_chains = need_multiple; | 
|  |  | 
|  | if (!need_multiple) { | 
|  | /* check all contexts */ | 
|  | for_each_context(priv, tmp) { | 
|  | if (!tmp->vif) | 
|  | continue; | 
|  | if (tmp->ht_need_multiple_chains) { | 
|  | need_multiple = true; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | ht_conf->single_chain_sufficient = !need_multiple; | 
|  | } | 
|  |  | 
|  | static void iwlagn_chain_noise_reset(struct iwl_priv *priv) | 
|  | { | 
|  | struct iwl_chain_noise_data *data = &priv->chain_noise_data; | 
|  | int ret; | 
|  |  | 
|  | if (priv->calib_disabled & IWL_CHAIN_NOISE_CALIB_DISABLED) | 
|  | return; | 
|  |  | 
|  | if ((data->state == IWL_CHAIN_NOISE_ALIVE) && | 
|  | iwl_is_any_associated(priv)) { | 
|  | struct iwl_calib_chain_noise_reset_cmd cmd; | 
|  |  | 
|  | /* clear data for chain noise calibration algorithm */ | 
|  | data->chain_noise_a = 0; | 
|  | data->chain_noise_b = 0; | 
|  | data->chain_noise_c = 0; | 
|  | data->chain_signal_a = 0; | 
|  | data->chain_signal_b = 0; | 
|  | data->chain_signal_c = 0; | 
|  | data->beacon_count = 0; | 
|  |  | 
|  | memset(&cmd, 0, sizeof(cmd)); | 
|  | iwl_set_calib_hdr(&cmd.hdr, | 
|  | priv->phy_calib_chain_noise_reset_cmd); | 
|  | ret = iwl_dvm_send_cmd_pdu(priv, | 
|  | REPLY_PHY_CALIBRATION_CMD, | 
|  | 0, sizeof(cmd), &cmd); | 
|  | if (ret) | 
|  | IWL_ERR(priv, | 
|  | "Could not send REPLY_PHY_CALIBRATION_CMD\n"); | 
|  | data->state = IWL_CHAIN_NOISE_ACCUMULATE; | 
|  | IWL_DEBUG_CALIB(priv, "Run chain_noise_calibrate\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | void iwlagn_bss_info_changed(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_bss_conf *bss_conf, | 
|  | u32 changes) | 
|  | { | 
|  | struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); | 
|  | struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif); | 
|  | int ret; | 
|  | bool force = false; | 
|  |  | 
|  | mutex_lock(&priv->mutex); | 
|  |  | 
|  | if (changes & BSS_CHANGED_IDLE && bss_conf->idle) { | 
|  | /* | 
|  | * If we go idle, then clearly no "passive-no-rx" | 
|  | * workaround is needed any more, this is a reset. | 
|  | */ | 
|  | iwlagn_lift_passive_no_rx(priv); | 
|  | } | 
|  |  | 
|  | if (unlikely(!iwl_is_ready(priv))) { | 
|  | IWL_DEBUG_MAC80211(priv, "leave - not ready\n"); | 
|  | mutex_unlock(&priv->mutex); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (unlikely(!ctx->vif)) { | 
|  | IWL_DEBUG_MAC80211(priv, "leave - vif is NULL\n"); | 
|  | mutex_unlock(&priv->mutex); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (changes & BSS_CHANGED_BEACON_INT) | 
|  | force = true; | 
|  |  | 
|  | if (changes & BSS_CHANGED_QOS) { | 
|  | ctx->qos_data.qos_active = bss_conf->qos; | 
|  | iwlagn_update_qos(priv, ctx); | 
|  | } | 
|  |  | 
|  | ctx->staging.assoc_id = cpu_to_le16(vif->bss_conf.aid); | 
|  | if (vif->bss_conf.use_short_preamble) | 
|  | ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; | 
|  | else | 
|  | ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; | 
|  |  | 
|  | if (changes & BSS_CHANGED_ASSOC) { | 
|  | if (bss_conf->assoc) { | 
|  | priv->timestamp = bss_conf->sync_tsf; | 
|  | ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; | 
|  | } else { | 
|  | ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; | 
|  |  | 
|  | if (ctx->ctxid == IWL_RXON_CTX_BSS) | 
|  | priv->have_rekey_data = false; | 
|  | } | 
|  |  | 
|  | iwlagn_bt_coex_rssi_monitor(priv); | 
|  | } | 
|  |  | 
|  | if (ctx->ht.enabled) { | 
|  | ctx->ht.protection = bss_conf->ht_operation_mode & | 
|  | IEEE80211_HT_OP_MODE_PROTECTION; | 
|  | ctx->ht.non_gf_sta_present = !!(bss_conf->ht_operation_mode & | 
|  | IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT); | 
|  | iwlagn_check_needed_chains(priv, ctx, bss_conf); | 
|  | iwl_set_rxon_ht(priv, &priv->current_ht_config); | 
|  | } | 
|  |  | 
|  | iwlagn_set_rxon_chain(priv, ctx); | 
|  |  | 
|  | if (bss_conf->use_cts_prot && (priv->band != NL80211_BAND_5GHZ)) | 
|  | ctx->staging.flags |= RXON_FLG_TGG_PROTECT_MSK; | 
|  | else | 
|  | ctx->staging.flags &= ~RXON_FLG_TGG_PROTECT_MSK; | 
|  |  | 
|  | if (bss_conf->use_cts_prot) | 
|  | ctx->staging.flags |= RXON_FLG_SELF_CTS_EN; | 
|  | else | 
|  | ctx->staging.flags &= ~RXON_FLG_SELF_CTS_EN; | 
|  |  | 
|  | memcpy(ctx->staging.bssid_addr, bss_conf->bssid, ETH_ALEN); | 
|  |  | 
|  | if (vif->type == NL80211_IFTYPE_AP || | 
|  | vif->type == NL80211_IFTYPE_ADHOC) { | 
|  | if (vif->bss_conf.enable_beacon) { | 
|  | ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK; | 
|  | priv->beacon_ctx = ctx; | 
|  | } else { | 
|  | ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK; | 
|  | priv->beacon_ctx = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If the ucode decides to do beacon filtering before | 
|  | * association, it will lose beacons that are needed | 
|  | * before sending frames out on passive channels. This | 
|  | * causes association failures on those channels. Enable | 
|  | * receiving beacons in such cases. | 
|  | */ | 
|  |  | 
|  | if (vif->type == NL80211_IFTYPE_STATION) { | 
|  | if (!bss_conf->assoc) | 
|  | ctx->staging.filter_flags |= RXON_FILTER_BCON_AWARE_MSK; | 
|  | else | 
|  | ctx->staging.filter_flags &= | 
|  | ~RXON_FILTER_BCON_AWARE_MSK; | 
|  | } | 
|  |  | 
|  | if (force || memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging))) | 
|  | iwlagn_commit_rxon(priv, ctx); | 
|  |  | 
|  | if (changes & BSS_CHANGED_ASSOC && bss_conf->assoc) { | 
|  | /* | 
|  | * The chain noise calibration will enable PM upon | 
|  | * completion. If calibration has already been run | 
|  | * then we need to enable power management here. | 
|  | */ | 
|  | if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE) | 
|  | iwl_power_update_mode(priv, false); | 
|  |  | 
|  | /* Enable RX differential gain and sensitivity calibrations */ | 
|  | iwlagn_chain_noise_reset(priv); | 
|  | priv->start_calib = 1; | 
|  | } | 
|  |  | 
|  | if (changes & BSS_CHANGED_IBSS) { | 
|  | ret = iwlagn_manage_ibss_station(priv, vif, | 
|  | bss_conf->ibss_joined); | 
|  | if (ret) | 
|  | IWL_ERR(priv, "failed to %s IBSS station %pM\n", | 
|  | bss_conf->ibss_joined ? "add" : "remove", | 
|  | bss_conf->bssid); | 
|  | } | 
|  |  | 
|  | if (changes & BSS_CHANGED_BEACON && priv->beacon_ctx == ctx) { | 
|  | if (iwlagn_update_beacon(priv, vif)) | 
|  | IWL_ERR(priv, "Error updating beacon\n"); | 
|  | } | 
|  |  | 
|  | mutex_unlock(&priv->mutex); | 
|  | } | 
|  |  | 
|  | void iwlagn_post_scan(struct iwl_priv *priv) | 
|  | { | 
|  | struct iwl_rxon_context *ctx; | 
|  |  | 
|  | /* | 
|  | * We do not commit power settings while scan is pending, | 
|  | * do it now if the settings changed. | 
|  | */ | 
|  | iwl_power_set_mode(priv, &priv->power_data.sleep_cmd_next, false); | 
|  | iwl_set_tx_power(priv, priv->tx_power_next, false); | 
|  |  | 
|  | /* | 
|  | * Since setting the RXON may have been deferred while | 
|  | * performing the scan, fire one off if needed | 
|  | */ | 
|  | for_each_context(priv, ctx) | 
|  | if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging))) | 
|  | iwlagn_commit_rxon(priv, ctx); | 
|  |  | 
|  | iwlagn_set_pan_params(priv); | 
|  | } |