| // SPDX-License-Identifier: GPL-2.0-only | 
 | /******************************************************************************* | 
 |     AudioScience HPI driver | 
 |     Common Linux HPI ioctl and module probe/remove functions | 
 |  | 
 |     Copyright (C) 1997-2014  AudioScience Inc. <support@audioscience.com> | 
 |  | 
 |  | 
 | *******************************************************************************/ | 
 | #define SOURCEFILE_NAME "hpioctl.c" | 
 |  | 
 | #include "hpi_internal.h" | 
 | #include "hpi_version.h" | 
 | #include "hpimsginit.h" | 
 | #include "hpidebug.h" | 
 | #include "hpimsgx.h" | 
 | #include "hpioctl.h" | 
 | #include "hpicmn.h" | 
 |  | 
 | #include <linux/fs.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/moduleparam.h> | 
 | #include <linux/uaccess.h> | 
 | #include <linux/pci.h> | 
 | #include <linux/stringify.h> | 
 | #include <linux/module.h> | 
 | #include <linux/vmalloc.h> | 
 | #include <linux/nospec.h> | 
 |  | 
 | #ifdef MODULE_FIRMWARE | 
 | MODULE_FIRMWARE("asihpi/dsp5000.bin"); | 
 | MODULE_FIRMWARE("asihpi/dsp6200.bin"); | 
 | MODULE_FIRMWARE("asihpi/dsp6205.bin"); | 
 | MODULE_FIRMWARE("asihpi/dsp6400.bin"); | 
 | MODULE_FIRMWARE("asihpi/dsp6600.bin"); | 
 | MODULE_FIRMWARE("asihpi/dsp8700.bin"); | 
 | MODULE_FIRMWARE("asihpi/dsp8900.bin"); | 
 | #endif | 
 |  | 
 | static int prealloc_stream_buf; | 
 | module_param(prealloc_stream_buf, int, 0444); | 
 | MODULE_PARM_DESC(prealloc_stream_buf, | 
 | 	"Preallocate size for per-adapter stream buffer"); | 
 |  | 
 | /* Allow the debug level to be changed after module load. | 
 |  E.g.   echo 2 > /sys/module/asihpi/parameters/hpiDebugLevel | 
 | */ | 
 | module_param(hpi_debug_level, int, 0644); | 
 | MODULE_PARM_DESC(hpi_debug_level, "debug verbosity 0..5"); | 
 |  | 
 | /* List of adapters found */ | 
 | static struct hpi_adapter adapters[HPI_MAX_ADAPTERS]; | 
 |  | 
 | /* Wrapper function to HPI_Message to enable dumping of the | 
 |    message and response types. | 
 | */ | 
 | static void hpi_send_recv_f(struct hpi_message *phm, struct hpi_response *phr, | 
 | 	struct file *file) | 
 | { | 
 | 	if ((phm->adapter_index >= HPI_MAX_ADAPTERS) | 
 | 		&& (phm->object != HPI_OBJ_SUBSYSTEM)) | 
 | 		phr->error = HPI_ERROR_INVALID_OBJ_INDEX; | 
 | 	else | 
 | 		hpi_send_recv_ex(phm, phr, file); | 
 | } | 
 |  | 
 | /* This is called from hpifunc.c functions, called by ALSA | 
 |  * (or other kernel process) In this case there is no file descriptor | 
 |  * available for the message cache code | 
 |  */ | 
 | void hpi_send_recv(struct hpi_message *phm, struct hpi_response *phr) | 
 | { | 
 | 	hpi_send_recv_f(phm, phr, HOWNER_KERNEL); | 
 | } | 
 |  | 
 | EXPORT_SYMBOL(hpi_send_recv); | 
 | /* for radio-asihpi */ | 
 |  | 
 | int asihpi_hpi_release(struct file *file) | 
 | { | 
 | 	struct hpi_message hm; | 
 | 	struct hpi_response hr; | 
 |  | 
 | /* HPI_DEBUG_LOG(INFO,"hpi_release file %p, pid %d\n", file, current->pid); */ | 
 | 	/* close the subsystem just in case the application forgot to. */ | 
 | 	hpi_init_message_response(&hm, &hr, HPI_OBJ_SUBSYSTEM, | 
 | 		HPI_SUBSYS_CLOSE); | 
 | 	hpi_send_recv_ex(&hm, &hr, file); | 
 | 	return 0; | 
 | } | 
 |  | 
 | long asihpi_hpi_ioctl(struct file *file, unsigned int cmd, unsigned long arg) | 
 | { | 
 | 	struct hpi_ioctl_linux __user *phpi_ioctl_data; | 
 | 	void __user *puhm; | 
 | 	void __user *puhr; | 
 | 	union hpi_message_buffer_v1 *hm; | 
 | 	union hpi_response_buffer_v1 *hr; | 
 | 	u16 msg_size; | 
 | 	u16 res_max_size; | 
 | 	u32 uncopied_bytes; | 
 | 	int err = 0; | 
 |  | 
 | 	if (cmd != HPI_IOCTL_LINUX) | 
 | 		return -EINVAL; | 
 |  | 
 | 	hm = kmalloc(sizeof(*hm), GFP_KERNEL); | 
 | 	hr = kzalloc(sizeof(*hr), GFP_KERNEL); | 
 | 	if (!hm || !hr) { | 
 | 		err = -ENOMEM; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	phpi_ioctl_data = (struct hpi_ioctl_linux __user *)arg; | 
 |  | 
 | 	/* Read the message and response pointers from user space.  */ | 
 | 	if (get_user(puhm, &phpi_ioctl_data->phm) | 
 | 		|| get_user(puhr, &phpi_ioctl_data->phr)) { | 
 | 		err = -EFAULT; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* Now read the message size and data from user space.  */ | 
 | 	if (get_user(msg_size, (u16 __user *)puhm)) { | 
 | 		err = -EFAULT; | 
 | 		goto out; | 
 | 	} | 
 | 	if (msg_size > sizeof(*hm)) | 
 | 		msg_size = sizeof(*hm); | 
 |  | 
 | 	/* printk(KERN_INFO "message size %d\n", hm->h.wSize); */ | 
 |  | 
 | 	uncopied_bytes = copy_from_user(hm, puhm, msg_size); | 
 | 	if (uncopied_bytes) { | 
 | 		HPI_DEBUG_LOG(ERROR, "uncopied bytes %d\n", uncopied_bytes); | 
 | 		err = -EFAULT; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* Override h.size in case it is changed between two userspace fetches */ | 
 | 	hm->h.size = msg_size; | 
 |  | 
 | 	if (get_user(res_max_size, (u16 __user *)puhr)) { | 
 | 		err = -EFAULT; | 
 | 		goto out; | 
 | 	} | 
 | 	/* printk(KERN_INFO "user response size %d\n", res_max_size); */ | 
 | 	if (res_max_size < sizeof(struct hpi_response_header)) { | 
 | 		HPI_DEBUG_LOG(WARNING, "small res size %d\n", res_max_size); | 
 | 		err = -EFAULT; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	res_max_size = min_t(size_t, res_max_size, sizeof(*hr)); | 
 |  | 
 | 	switch (hm->h.function) { | 
 | 	case HPI_SUBSYS_CREATE_ADAPTER: | 
 | 	case HPI_ADAPTER_DELETE: | 
 | 		/* Application must not use these functions! */ | 
 | 		hr->h.size = sizeof(hr->h); | 
 | 		hr->h.error = HPI_ERROR_INVALID_OPERATION; | 
 | 		hr->h.function = hm->h.function; | 
 | 		uncopied_bytes = copy_to_user(puhr, hr, hr->h.size); | 
 | 		if (uncopied_bytes) | 
 | 			err = -EFAULT; | 
 | 		else | 
 | 			err = 0; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	hr->h.size = res_max_size; | 
 | 	if (hm->h.object == HPI_OBJ_SUBSYSTEM) { | 
 | 		hpi_send_recv_f(&hm->m0, &hr->r0, file); | 
 | 	} else { | 
 | 		u16 __user *ptr = NULL; | 
 | 		u32 size = 0; | 
 | 		/* -1=no data 0=read from user mem, 1=write to user mem */ | 
 | 		int wrflag = -1; | 
 | 		struct hpi_adapter *pa = NULL; | 
 |  | 
 | 		if (hm->h.adapter_index < ARRAY_SIZE(adapters)) | 
 | 			pa = &adapters[array_index_nospec(hm->h.adapter_index, | 
 | 							  ARRAY_SIZE(adapters))]; | 
 |  | 
 | 		if (!pa || !pa->adapter || !pa->adapter->type) { | 
 | 			hpi_init_response(&hr->r0, hm->h.object, | 
 | 				hm->h.function, HPI_ERROR_BAD_ADAPTER_NUMBER); | 
 |  | 
 | 			uncopied_bytes = | 
 | 				copy_to_user(puhr, hr, sizeof(hr->h)); | 
 | 			if (uncopied_bytes) | 
 | 				err = -EFAULT; | 
 | 			else | 
 | 				err = 0; | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		if (mutex_lock_interruptible(&pa->mutex)) { | 
 | 			err = -EINTR; | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		/* Dig out any pointers embedded in the message.  */ | 
 | 		switch (hm->h.function) { | 
 | 		case HPI_OSTREAM_WRITE: | 
 | 		case HPI_ISTREAM_READ:{ | 
 | 				/* Yes, sparse, this is correct. */ | 
 | 				ptr = (u16 __user *)hm->m0.u.d.u.data.pb_data; | 
 | 				size = hm->m0.u.d.u.data.data_size; | 
 |  | 
 | 				/* Allocate buffer according to application request. | 
 | 				   ?Is it better to alloc/free for the duration | 
 | 				   of the transaction? | 
 | 				 */ | 
 | 				if (pa->buffer_size < size) { | 
 | 					HPI_DEBUG_LOG(DEBUG, | 
 | 						"Realloc adapter %d stream " | 
 | 						"buffer from %zd to %d\n", | 
 | 						hm->h.adapter_index, | 
 | 						pa->buffer_size, size); | 
 | 					if (pa->p_buffer) { | 
 | 						pa->buffer_size = 0; | 
 | 						vfree(pa->p_buffer); | 
 | 					} | 
 | 					pa->p_buffer = vmalloc(size); | 
 | 					if (pa->p_buffer) | 
 | 						pa->buffer_size = size; | 
 | 					else { | 
 | 						HPI_DEBUG_LOG(ERROR, | 
 | 							"HPI could not allocate " | 
 | 							"stream buffer size %d\n", | 
 | 							size); | 
 |  | 
 | 						mutex_unlock(&pa->mutex); | 
 | 						err = -EINVAL; | 
 | 						goto out; | 
 | 					} | 
 | 				} | 
 |  | 
 | 				hm->m0.u.d.u.data.pb_data = pa->p_buffer; | 
 | 				if (hm->h.function == HPI_ISTREAM_READ) | 
 | 					/* from card, WRITE to user mem */ | 
 | 					wrflag = 1; | 
 | 				else | 
 | 					wrflag = 0; | 
 | 				break; | 
 | 			} | 
 |  | 
 | 		default: | 
 | 			size = 0; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		if (size && (wrflag == 0)) { | 
 | 			uncopied_bytes = | 
 | 				copy_from_user(pa->p_buffer, ptr, size); | 
 | 			if (uncopied_bytes) | 
 | 				HPI_DEBUG_LOG(WARNING, | 
 | 					"Missed %d of %d " | 
 | 					"bytes from user\n", uncopied_bytes, | 
 | 					size); | 
 | 		} | 
 |  | 
 | 		hpi_send_recv_f(&hm->m0, &hr->r0, file); | 
 |  | 
 | 		if (size && (wrflag == 1)) { | 
 | 			uncopied_bytes = | 
 | 				copy_to_user(ptr, pa->p_buffer, size); | 
 | 			if (uncopied_bytes) | 
 | 				HPI_DEBUG_LOG(WARNING, | 
 | 					"Missed %d of %d " "bytes to user\n", | 
 | 					uncopied_bytes, size); | 
 | 		} | 
 |  | 
 | 		mutex_unlock(&pa->mutex); | 
 | 	} | 
 |  | 
 | 	/* on return response size must be set */ | 
 | 	/*printk(KERN_INFO "response size %d\n", hr->h.wSize); */ | 
 |  | 
 | 	if (!hr->h.size) { | 
 | 		HPI_DEBUG_LOG(ERROR, "response zero size\n"); | 
 | 		err = -EFAULT; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if (hr->h.size > res_max_size) { | 
 | 		HPI_DEBUG_LOG(ERROR, "response too big %d %d\n", hr->h.size, | 
 | 			res_max_size); | 
 | 		hr->h.error = HPI_ERROR_RESPONSE_BUFFER_TOO_SMALL; | 
 | 		hr->h.specific_error = hr->h.size; | 
 | 		hr->h.size = sizeof(hr->h); | 
 | 	} | 
 |  | 
 | 	uncopied_bytes = copy_to_user(puhr, hr, hr->h.size); | 
 | 	if (uncopied_bytes) { | 
 | 		HPI_DEBUG_LOG(ERROR, "uncopied bytes %d\n", uncopied_bytes); | 
 | 		err = -EFAULT; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | out: | 
 | 	kfree(hm); | 
 | 	kfree(hr); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int asihpi_irq_count; | 
 |  | 
 | static irqreturn_t asihpi_isr(int irq, void *dev_id) | 
 | { | 
 | 	struct hpi_adapter *a = dev_id; | 
 | 	int handled; | 
 |  | 
 | 	if (!a->adapter->irq_query_and_clear) { | 
 | 		pr_err("asihpi_isr ASI%04X:%d no handler\n", a->adapter->type, | 
 | 			a->adapter->index); | 
 | 		return IRQ_NONE; | 
 | 	} | 
 |  | 
 | 	handled = a->adapter->irq_query_and_clear(a->adapter, 0); | 
 |  | 
 | 	if (!handled) | 
 | 		return IRQ_NONE; | 
 |  | 
 | 	asihpi_irq_count++; | 
 | 	/* printk(KERN_INFO "asihpi_isr %d ASI%04X:%d irq handled\n", | 
 | 	   asihpi_irq_count, a->adapter->type, a->adapter->index); */ | 
 |  | 
 | 	if (a->interrupt_callback) | 
 | 		return IRQ_WAKE_THREAD; | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static irqreturn_t asihpi_isr_thread(int irq, void *dev_id) | 
 | { | 
 | 	struct hpi_adapter *a = dev_id; | 
 |  | 
 | 	if (a->interrupt_callback) | 
 | 		a->interrupt_callback(a); | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | int asihpi_adapter_probe(struct pci_dev *pci_dev, | 
 | 			 const struct pci_device_id *pci_id) | 
 | { | 
 | 	int idx, nm, low_latency_mode = 0, irq_supported = 0; | 
 | 	int adapter_index; | 
 | 	unsigned int memlen; | 
 | 	struct hpi_message hm; | 
 | 	struct hpi_response hr; | 
 | 	struct hpi_adapter adapter; | 
 | 	struct hpi_pci pci = { 0 }; | 
 |  | 
 | 	memset(&adapter, 0, sizeof(adapter)); | 
 |  | 
 | 	dev_printk(KERN_DEBUG, &pci_dev->dev, | 
 | 		"probe %04x:%04x,%04x:%04x,%04x\n", pci_dev->vendor, | 
 | 		pci_dev->device, pci_dev->subsystem_vendor, | 
 | 		pci_dev->subsystem_device, pci_dev->devfn); | 
 |  | 
 | 	if (pcim_enable_device(pci_dev) < 0) { | 
 | 		dev_err(&pci_dev->dev, | 
 | 			"pci_enable_device failed, disabling device\n"); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	pci_set_master(pci_dev);	/* also sets latency timer if < 16 */ | 
 |  | 
 | 	hpi_init_message_response(&hm, &hr, HPI_OBJ_SUBSYSTEM, | 
 | 		HPI_SUBSYS_CREATE_ADAPTER); | 
 | 	hpi_init_response(&hr, HPI_OBJ_SUBSYSTEM, HPI_SUBSYS_CREATE_ADAPTER, | 
 | 		HPI_ERROR_PROCESSING_MESSAGE); | 
 |  | 
 | 	hm.adapter_index = HPI_ADAPTER_INDEX_INVALID; | 
 |  | 
 | 	nm = HPI_MAX_ADAPTER_MEM_SPACES; | 
 |  | 
 | 	for (idx = 0; idx < nm; idx++) { | 
 | 		HPI_DEBUG_LOG(INFO, "resource %d %pR\n", idx, | 
 | 			&pci_dev->resource[idx]); | 
 |  | 
 | 		if (pci_resource_flags(pci_dev, idx) & IORESOURCE_MEM) { | 
 | 			memlen = pci_resource_len(pci_dev, idx); | 
 | 			pci.ap_mem_base[idx] = | 
 | 				ioremap(pci_resource_start(pci_dev, idx), | 
 | 				memlen); | 
 | 			if (!pci.ap_mem_base[idx]) { | 
 | 				HPI_DEBUG_LOG(ERROR, | 
 | 					"ioremap failed, aborting\n"); | 
 | 				/* unmap previously mapped pci mem space */ | 
 | 				goto err; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	pci.pci_dev = pci_dev; | 
 | 	hm.u.s.resource.bus_type = HPI_BUS_PCI; | 
 | 	hm.u.s.resource.r.pci = &pci; | 
 |  | 
 | 	/* call CreateAdapterObject on the relevant hpi module */ | 
 | 	hpi_send_recv_ex(&hm, &hr, HOWNER_KERNEL); | 
 | 	if (hr.error) | 
 | 		goto err; | 
 |  | 
 | 	adapter_index = hr.u.s.adapter_index; | 
 | 	adapter.adapter = hpi_find_adapter(adapter_index); | 
 |  | 
 | 	if (prealloc_stream_buf) { | 
 | 		adapter.p_buffer = vmalloc(prealloc_stream_buf); | 
 | 		if (!adapter.p_buffer) { | 
 | 			HPI_DEBUG_LOG(ERROR, | 
 | 				"HPI could not allocate " | 
 | 				"kernel buffer size %d\n", | 
 | 				prealloc_stream_buf); | 
 | 			goto err; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	hpi_init_message_response(&hm, &hr, HPI_OBJ_ADAPTER, | 
 | 		HPI_ADAPTER_OPEN); | 
 | 	hm.adapter_index = adapter.adapter->index; | 
 | 	hpi_send_recv_ex(&hm, &hr, HOWNER_KERNEL); | 
 |  | 
 | 	if (hr.error) { | 
 | 		HPI_DEBUG_LOG(ERROR, "HPI_ADAPTER_OPEN failed, aborting\n"); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	/* Check if current mode == Low Latency mode */ | 
 | 	hpi_init_message_response(&hm, &hr, HPI_OBJ_ADAPTER, | 
 | 		HPI_ADAPTER_GET_MODE); | 
 | 	hm.adapter_index = adapter.adapter->index; | 
 | 	hpi_send_recv_ex(&hm, &hr, HOWNER_KERNEL); | 
 |  | 
 | 	if (!hr.error | 
 | 		&& hr.u.ax.mode.adapter_mode == HPI_ADAPTER_MODE_LOW_LATENCY) | 
 | 		low_latency_mode = 1; | 
 | 	else | 
 | 		dev_info(&pci_dev->dev, | 
 | 			"Adapter at index %d is not in low latency mode\n", | 
 | 			adapter.adapter->index); | 
 |  | 
 | 	/* Check if IRQs are supported */ | 
 | 	hpi_init_message_response(&hm, &hr, HPI_OBJ_ADAPTER, | 
 | 		HPI_ADAPTER_GET_PROPERTY); | 
 | 	hm.adapter_index = adapter.adapter->index; | 
 | 	hm.u.ax.property_set.property = HPI_ADAPTER_PROPERTY_SUPPORTS_IRQ; | 
 | 	hpi_send_recv_ex(&hm, &hr, HOWNER_KERNEL); | 
 | 	if (hr.error || !hr.u.ax.property_get.parameter1) { | 
 | 		dev_info(&pci_dev->dev, | 
 | 			"IRQs not supported by adapter at index %d\n", | 
 | 			adapter.adapter->index); | 
 | 	} else { | 
 | 		irq_supported = 1; | 
 | 	} | 
 |  | 
 | 	/* WARNING can't init mutex in 'adapter' | 
 | 	 * and then copy it to adapters[] ?!?! | 
 | 	 */ | 
 | 	adapters[adapter_index] = adapter; | 
 | 	mutex_init(&adapters[adapter_index].mutex); | 
 | 	pci_set_drvdata(pci_dev, &adapters[adapter_index]); | 
 |  | 
 | 	if (low_latency_mode && irq_supported) { | 
 | 		if (!adapter.adapter->irq_query_and_clear) { | 
 | 			dev_err(&pci_dev->dev, | 
 | 				"no IRQ handler for adapter %d, aborting\n", | 
 | 				adapter.adapter->index); | 
 | 			goto err; | 
 | 		} | 
 |  | 
 | 		/* Disable IRQ generation on DSP side by setting the rate to 0 */ | 
 | 		hpi_init_message_response(&hm, &hr, HPI_OBJ_ADAPTER, | 
 | 			HPI_ADAPTER_SET_PROPERTY); | 
 | 		hm.adapter_index = adapter.adapter->index; | 
 | 		hm.u.ax.property_set.property = HPI_ADAPTER_PROPERTY_IRQ_RATE; | 
 | 		hm.u.ax.property_set.parameter1 = 0; | 
 | 		hm.u.ax.property_set.parameter2 = 0; | 
 | 		hpi_send_recv_ex(&hm, &hr, HOWNER_KERNEL); | 
 | 		if (hr.error) { | 
 | 			HPI_DEBUG_LOG(ERROR, | 
 | 				"HPI_ADAPTER_GET_MODE failed, aborting\n"); | 
 | 			goto err; | 
 | 		} | 
 |  | 
 | 		/* Note: request_irq calls asihpi_isr here */ | 
 | 		if (request_threaded_irq(pci_dev->irq, asihpi_isr, | 
 | 					 asihpi_isr_thread, IRQF_SHARED, | 
 | 					 "asihpi", &adapters[adapter_index])) { | 
 | 			dev_err(&pci_dev->dev, "request_irq(%d) failed\n", | 
 | 				pci_dev->irq); | 
 | 			goto err; | 
 | 		} | 
 |  | 
 | 		adapters[adapter_index].interrupt_mode = 1; | 
 |  | 
 | 		dev_info(&pci_dev->dev, "using irq %d\n", pci_dev->irq); | 
 | 		adapters[adapter_index].irq = pci_dev->irq; | 
 | 	} else { | 
 | 		dev_info(&pci_dev->dev, "using polled mode\n"); | 
 | 	} | 
 |  | 
 | 	dev_info(&pci_dev->dev, "probe succeeded for ASI%04X HPI index %d\n", | 
 | 		 adapter.adapter->type, adapter_index); | 
 |  | 
 | 	return 0; | 
 |  | 
 | err: | 
 | 	while (--idx >= 0) { | 
 | 		if (pci.ap_mem_base[idx]) { | 
 | 			iounmap(pci.ap_mem_base[idx]); | 
 | 			pci.ap_mem_base[idx] = NULL; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (adapter.p_buffer) { | 
 | 		adapter.buffer_size = 0; | 
 | 		vfree(adapter.p_buffer); | 
 | 	} | 
 |  | 
 | 	HPI_DEBUG_LOG(ERROR, "adapter_probe failed\n"); | 
 | 	return -ENODEV; | 
 | } | 
 |  | 
 | void asihpi_adapter_remove(struct pci_dev *pci_dev) | 
 | { | 
 | 	int idx; | 
 | 	struct hpi_message hm; | 
 | 	struct hpi_response hr; | 
 | 	struct hpi_adapter *pa; | 
 | 	struct hpi_pci pci; | 
 |  | 
 | 	pa = pci_get_drvdata(pci_dev); | 
 | 	pci = pa->adapter->pci; | 
 |  | 
 | 	/* Disable IRQ generation on DSP side */ | 
 | 	hpi_init_message_response(&hm, &hr, HPI_OBJ_ADAPTER, | 
 | 		HPI_ADAPTER_SET_PROPERTY); | 
 | 	hm.adapter_index = pa->adapter->index; | 
 | 	hm.u.ax.property_set.property = HPI_ADAPTER_PROPERTY_IRQ_RATE; | 
 | 	hm.u.ax.property_set.parameter1 = 0; | 
 | 	hm.u.ax.property_set.parameter2 = 0; | 
 | 	hpi_send_recv_ex(&hm, &hr, HOWNER_KERNEL); | 
 |  | 
 | 	hpi_init_message_response(&hm, &hr, HPI_OBJ_ADAPTER, | 
 | 		HPI_ADAPTER_DELETE); | 
 | 	hm.adapter_index = pa->adapter->index; | 
 | 	hpi_send_recv_ex(&hm, &hr, HOWNER_KERNEL); | 
 |  | 
 | 	/* unmap PCI memory space, mapped during device init. */ | 
 | 	for (idx = 0; idx < HPI_MAX_ADAPTER_MEM_SPACES; ++idx) | 
 | 		iounmap(pci.ap_mem_base[idx]); | 
 |  | 
 | 	if (pa->irq) | 
 | 		free_irq(pa->irq, pa); | 
 |  | 
 | 	vfree(pa->p_buffer); | 
 |  | 
 | 	if (1) | 
 | 		dev_info(&pci_dev->dev, | 
 | 			 "remove %04x:%04x,%04x:%04x,%04x, HPI index %d\n", | 
 | 			 pci_dev->vendor, pci_dev->device, | 
 | 			 pci_dev->subsystem_vendor, pci_dev->subsystem_device, | 
 | 			 pci_dev->devfn, pa->adapter->index); | 
 |  | 
 | 	memset(pa, 0, sizeof(*pa)); | 
 | } | 
 |  | 
 | void __init asihpi_init(void) | 
 | { | 
 | 	struct hpi_message hm; | 
 | 	struct hpi_response hr; | 
 |  | 
 | 	memset(adapters, 0, sizeof(adapters)); | 
 |  | 
 | 	printk(KERN_INFO "ASIHPI driver " HPI_VER_STRING "\n"); | 
 |  | 
 | 	hpi_init_message_response(&hm, &hr, HPI_OBJ_SUBSYSTEM, | 
 | 		HPI_SUBSYS_DRIVER_LOAD); | 
 | 	hpi_send_recv_ex(&hm, &hr, HOWNER_KERNEL); | 
 | } | 
 |  | 
 | void asihpi_exit(void) | 
 | { | 
 | 	struct hpi_message hm; | 
 | 	struct hpi_response hr; | 
 |  | 
 | 	hpi_init_message_response(&hm, &hr, HPI_OBJ_SUBSYSTEM, | 
 | 		HPI_SUBSYS_DRIVER_UNLOAD); | 
 | 	hpi_send_recv_ex(&hm, &hr, HOWNER_KERNEL); | 
 | } |