|  | /* | 
|  | * Copyright (c) 2005 Cisco Systems.  All rights reserved. | 
|  | * | 
|  | * This software is available to you under a choice of one of two | 
|  | * licenses.  You may choose to be licensed under the terms of the GNU | 
|  | * General Public License (GPL) Version 2, available from the file | 
|  | * COPYING in the main directory of this source tree, or the | 
|  | * OpenIB.org BSD license below: | 
|  | * | 
|  | *     Redistribution and use in source and binary forms, with or | 
|  | *     without modification, are permitted provided that the following | 
|  | *     conditions are met: | 
|  | * | 
|  | *      - Redistributions of source code must retain the above | 
|  | *        copyright notice, this list of conditions and the following | 
|  | *        disclaimer. | 
|  | * | 
|  | *      - Redistributions in binary form must reproduce the above | 
|  | *        copyright notice, this list of conditions and the following | 
|  | *        disclaimer in the documentation and/or other materials | 
|  | *        provided with the distribution. | 
|  | * | 
|  | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, | 
|  | * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF | 
|  | * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND | 
|  | * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS | 
|  | * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN | 
|  | * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN | 
|  | * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE | 
|  | * SOFTWARE. | 
|  | * | 
|  | * $Id$ | 
|  | */ | 
|  |  | 
|  | #ifndef SCSI_SRP_H | 
|  | #define SCSI_SRP_H | 
|  |  | 
|  | /* | 
|  | * Structures and constants for the SCSI RDMA Protocol (SRP) as | 
|  | * defined by the INCITS T10 committee.  This file was written using | 
|  | * draft Revision 16a of the SRP standard. | 
|  | */ | 
|  |  | 
|  | #include <linux/types.h> | 
|  | #include <scsi/scsi.h> | 
|  |  | 
|  | enum { | 
|  | SRP_LOGIN_REQ	= 0x00, | 
|  | SRP_TSK_MGMT	= 0x01, | 
|  | SRP_CMD		= 0x02, | 
|  | SRP_I_LOGOUT	= 0x03, | 
|  | SRP_LOGIN_RSP	= 0xc0, | 
|  | SRP_RSP		= 0xc1, | 
|  | SRP_LOGIN_REJ	= 0xc2, | 
|  | SRP_T_LOGOUT	= 0x80, | 
|  | SRP_CRED_REQ	= 0x81, | 
|  | SRP_AER_REQ	= 0x82, | 
|  | SRP_CRED_RSP	= 0x41, | 
|  | SRP_AER_RSP	= 0x42 | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | SRP_BUF_FORMAT_DIRECT	= 1 << 1, | 
|  | SRP_BUF_FORMAT_INDIRECT	= 1 << 2 | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | SRP_NO_DATA_DESC	= 0, | 
|  | SRP_DATA_DESC_DIRECT	= 1, | 
|  | SRP_DATA_DESC_INDIRECT	= 2, | 
|  | SRP_DATA_DESC_IMM	= 3,	/* new in SRP2 */ | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | SRP_TSK_ABORT_TASK	= 0x01, | 
|  | SRP_TSK_ABORT_TASK_SET	= 0x02, | 
|  | SRP_TSK_CLEAR_TASK_SET	= 0x04, | 
|  | SRP_TSK_LUN_RESET	= 0x08, | 
|  | SRP_TSK_CLEAR_ACA	= 0x40 | 
|  | }; | 
|  |  | 
|  | enum srp_login_rej_reason { | 
|  | SRP_LOGIN_REJ_UNABLE_ESTABLISH_CHANNEL		= 0x00010000, | 
|  | SRP_LOGIN_REJ_INSUFFICIENT_RESOURCES		= 0x00010001, | 
|  | SRP_LOGIN_REJ_REQ_IT_IU_LENGTH_TOO_LARGE	= 0x00010002, | 
|  | SRP_LOGIN_REJ_UNABLE_ASSOCIATE_CHANNEL		= 0x00010003, | 
|  | SRP_LOGIN_REJ_UNSUPPORTED_DESCRIPTOR_FMT	= 0x00010004, | 
|  | SRP_LOGIN_REJ_MULTI_CHANNEL_UNSUPPORTED		= 0x00010005, | 
|  | SRP_LOGIN_REJ_CHANNEL_LIMIT_REACHED		= 0x00010006 | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | SRP_REV10_IB_IO_CLASS	= 0xff00, | 
|  | SRP_REV16A_IB_IO_CLASS	= 0x0100 | 
|  | }; | 
|  |  | 
|  | struct srp_direct_buf { | 
|  | __be64	va; | 
|  | __be32	key; | 
|  | __be32  len; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * We need the packed attribute because the SRP spec puts the list of | 
|  | * descriptors at an offset of 20, which is not aligned to the size of | 
|  | * struct srp_direct_buf.  The whole structure must be packed to avoid | 
|  | * having the 20-byte structure padded to 24 bytes on 64-bit architectures. | 
|  | */ | 
|  | struct srp_indirect_buf { | 
|  | struct srp_direct_buf	table_desc __packed __aligned(4); | 
|  | __be32			len; | 
|  | struct srp_direct_buf	desc_list[] __packed __aligned(4); | 
|  | }; | 
|  |  | 
|  | /* Immediate data buffer descriptor as defined in SRP2. */ | 
|  | struct srp_imm_buf { | 
|  | __be32	len; | 
|  | }; | 
|  |  | 
|  | /* srp_login_req.flags */ | 
|  | enum { | 
|  | SRP_MULTICHAN_SINGLE = 0, | 
|  | SRP_MULTICHAN_MULTI  = 1, | 
|  | SRP_IMMED_REQUESTED  = 0x80,	/* new in SRP2 */ | 
|  | }; | 
|  |  | 
|  | struct srp_login_req { | 
|  | u8	opcode; | 
|  | u8	reserved1[7]; | 
|  | u64	tag; | 
|  | __be32	req_it_iu_len; | 
|  | u8	reserved2[4]; | 
|  | __be16	req_buf_fmt; | 
|  | u8	req_flags; | 
|  | u8	reserved3[1]; | 
|  | __be16	imm_data_offset;	/* new in SRP2 */ | 
|  | u8	reserved4[2]; | 
|  | u8	initiator_port_id[16]; | 
|  | u8	target_port_id[16]; | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * struct srp_login_req_rdma - RDMA/CM login parameters. | 
|  | * | 
|  | * RDMA/CM over InfiniBand can only carry 92 - 36 = 56 bytes of private | 
|  | * data. The %srp_login_req_rdma structure contains the same information as | 
|  | * %srp_login_req but with the reserved data removed. | 
|  | */ | 
|  | struct srp_login_req_rdma { | 
|  | u64	tag; | 
|  | __be16	req_buf_fmt; | 
|  | u8	req_flags; | 
|  | u8	opcode; | 
|  | __be32	req_it_iu_len; | 
|  | u8	initiator_port_id[16]; | 
|  | u8	target_port_id[16]; | 
|  | __be16	imm_data_offset; | 
|  | u8	reserved[6]; | 
|  | }; | 
|  |  | 
|  | /* srp_login_rsp.rsp_flags */ | 
|  | enum { | 
|  | SRP_LOGIN_RSP_MULTICHAN_NO_CHAN	   = 0x0, | 
|  | SRP_LOGIN_RSP_MULTICHAN_TERMINATED = 0x1, | 
|  | SRP_LOGIN_RSP_MULTICHAN_MAINTAINED = 0x2, | 
|  | SRP_LOGIN_RSP_IMMED_SUPP	   = 0x80, /* new in SRP2 */ | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * The SRP spec defines the size of the LOGIN_RSP structure to be 52 | 
|  | * bytes, so it needs to be packed to avoid having it padded to 56 | 
|  | * bytes on 64-bit architectures. | 
|  | */ | 
|  | struct srp_login_rsp { | 
|  | u8	opcode; | 
|  | u8	reserved1[3]; | 
|  | __be32	req_lim_delta; | 
|  | u64	tag __packed __aligned(4); | 
|  | __be32	max_it_iu_len; | 
|  | __be32	max_ti_iu_len; | 
|  | __be16	buf_fmt; | 
|  | u8	rsp_flags; | 
|  | u8	reserved2[25]; | 
|  | }; | 
|  |  | 
|  | struct srp_login_rej { | 
|  | u8	opcode; | 
|  | u8	reserved1[3]; | 
|  | __be32	reason; | 
|  | u64	tag; | 
|  | u8	reserved2[8]; | 
|  | __be16	buf_fmt; | 
|  | u8	reserved3[6]; | 
|  | }; | 
|  |  | 
|  | struct srp_i_logout { | 
|  | u8	opcode; | 
|  | u8	reserved[7]; | 
|  | u64	tag; | 
|  | }; | 
|  |  | 
|  | struct srp_t_logout { | 
|  | u8	opcode; | 
|  | u8	sol_not; | 
|  | u8	reserved[2]; | 
|  | __be32	reason; | 
|  | u64	tag; | 
|  | }; | 
|  |  | 
|  | struct srp_tsk_mgmt { | 
|  | u8	opcode; | 
|  | u8	sol_not; | 
|  | u8	reserved1[6]; | 
|  | u64	tag; | 
|  | u8	reserved2[4]; | 
|  | struct scsi_lun	lun; | 
|  | u8	reserved3[2]; | 
|  | u8	tsk_mgmt_func; | 
|  | u8	reserved4; | 
|  | u64	task_tag; | 
|  | u8	reserved5[8]; | 
|  | }; | 
|  |  | 
|  | struct srp_cmd { | 
|  | u8	opcode; | 
|  | u8	sol_not; | 
|  | u8	reserved1[3]; | 
|  | u8	buf_fmt; | 
|  | u8	data_out_desc_cnt; | 
|  | u8	data_in_desc_cnt; | 
|  | u64	tag; | 
|  | u8	reserved2[4]; | 
|  | struct scsi_lun	lun; | 
|  | u8	reserved3; | 
|  | u8	task_attr; | 
|  | u8	reserved4; | 
|  | u8	add_cdb_len; | 
|  | u8	cdb[16]; | 
|  | u8	add_data[]; | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | SRP_RSP_FLAG_RSPVALID = 1 << 0, | 
|  | SRP_RSP_FLAG_SNSVALID = 1 << 1, | 
|  | SRP_RSP_FLAG_DOOVER   = 1 << 2, | 
|  | SRP_RSP_FLAG_DOUNDER  = 1 << 3, | 
|  | SRP_RSP_FLAG_DIOVER   = 1 << 4, | 
|  | SRP_RSP_FLAG_DIUNDER  = 1 << 5 | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * The SRP spec defines the size of the RSP structure to be 36 bytes, | 
|  | * so it needs to be packed to avoid having it padded to 40 bytes on | 
|  | * 64-bit architectures. | 
|  | */ | 
|  | struct srp_rsp { | 
|  | u8	opcode; | 
|  | u8	sol_not; | 
|  | u8	reserved1[2]; | 
|  | __be32	req_lim_delta; | 
|  | u64	tag __packed __aligned(4); | 
|  | u8	reserved2[2]; | 
|  | u8	flags; | 
|  | u8	status; | 
|  | __be32	data_out_res_cnt; | 
|  | __be32	data_in_res_cnt; | 
|  | __be32	sense_data_len; | 
|  | __be32	resp_data_len; | 
|  | u8	data[]; | 
|  | }; | 
|  |  | 
|  | struct srp_cred_req { | 
|  | u8	opcode; | 
|  | u8	sol_not; | 
|  | u8	reserved[2]; | 
|  | __be32	req_lim_delta; | 
|  | u64	tag; | 
|  | }; | 
|  |  | 
|  | struct srp_cred_rsp { | 
|  | u8	opcode; | 
|  | u8	reserved[7]; | 
|  | u64	tag; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * The SRP spec defines the fixed portion of the AER_REQ structure to be | 
|  | * 36 bytes, so it needs to be packed to avoid having it padded to 40 bytes | 
|  | * on 64-bit architectures. | 
|  | */ | 
|  | struct srp_aer_req { | 
|  | u8	opcode; | 
|  | u8	sol_not; | 
|  | u8	reserved[2]; | 
|  | __be32	req_lim_delta; | 
|  | u64	tag __packed __aligned(4); | 
|  | u32	reserved2; | 
|  | struct scsi_lun	lun; | 
|  | __be32	sense_data_len; | 
|  | u32	reserved3; | 
|  | u8	sense_data[]; | 
|  | }; | 
|  |  | 
|  | struct srp_aer_rsp { | 
|  | u8	opcode; | 
|  | u8	reserved[7]; | 
|  | u64	tag; | 
|  | }; | 
|  |  | 
|  | #endif /* SCSI_SRP_H */ |