| /* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ | |
| /* | |
| * DLCI/FRAD Definitions for Frame Relay Access Devices. DLCI devices are | |
| * created for each DLCI associated with a FRAD. The FRAD driver | |
| * is not truly a network device, but the lower level device | |
| * handler. This allows other FRAD manufacturers to use the DLCI | |
| * code, including its RFC1490 encapsulation alongside the current | |
| * implementation for the Sangoma cards. | |
| * | |
| * Version: @(#)if_ifrad.h 0.15 31 Mar 96 | |
| * | |
| * Author: Mike McLagan <mike.mclagan@linux.org> | |
| * | |
| * Changes: | |
| * 0.15 Mike McLagan changed structure defs (packed) | |
| * re-arranged flags | |
| * added DLCI_RET vars | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the License, or (at your option) any later version. | |
| */ | |
| #ifndef _UAPI_FRAD_H_ | |
| #define _UAPI_FRAD_H_ | |
| #include <linux/if.h> | |
| /* Structures and constants associated with the DLCI device driver */ | |
| struct dlci_add | |
| { | |
| char devname[IFNAMSIZ]; | |
| short dlci; | |
| }; | |
| #define DLCI_GET_CONF (SIOCDEVPRIVATE + 2) | |
| #define DLCI_SET_CONF (SIOCDEVPRIVATE + 3) | |
| /* | |
| * These are related to the Sangoma SDLA and should remain in order. | |
| * Code within the SDLA module is based on the specifics of this | |
| * structure. Change at your own peril. | |
| */ | |
| struct dlci_conf { | |
| short flags; | |
| short CIR_fwd; | |
| short Bc_fwd; | |
| short Be_fwd; | |
| short CIR_bwd; | |
| short Bc_bwd; | |
| short Be_bwd; | |
| /* these are part of the status read */ | |
| short Tc_fwd; | |
| short Tc_bwd; | |
| short Tf_max; | |
| short Tb_max; | |
| /* add any new fields here above is a mirror of sdla_dlci_conf */ | |
| }; | |
| #define DLCI_GET_SLAVE (SIOCDEVPRIVATE + 4) | |
| /* configuration flags for DLCI */ | |
| #define DLCI_IGNORE_CIR_OUT 0x0001 | |
| #define DLCI_ACCOUNT_CIR_IN 0x0002 | |
| #define DLCI_BUFFER_IF 0x0008 | |
| #define DLCI_VALID_FLAGS 0x000B | |
| /* defines for the actual Frame Relay hardware */ | |
| #define FRAD_GET_CONF (SIOCDEVPRIVATE) | |
| #define FRAD_SET_CONF (SIOCDEVPRIVATE + 1) | |
| #define FRAD_LAST_IOCTL FRAD_SET_CONF | |
| /* | |
| * Based on the setup for the Sangoma SDLA. If changes are | |
| * necessary to this structure, a routine will need to be | |
| * added to that module to copy fields. | |
| */ | |
| struct frad_conf | |
| { | |
| short station; | |
| short flags; | |
| short kbaud; | |
| short clocking; | |
| short mtu; | |
| short T391; | |
| short T392; | |
| short N391; | |
| short N392; | |
| short N393; | |
| short CIR_fwd; | |
| short Bc_fwd; | |
| short Be_fwd; | |
| short CIR_bwd; | |
| short Bc_bwd; | |
| short Be_bwd; | |
| /* Add new fields here, above is a mirror of the sdla_conf */ | |
| }; | |
| #define FRAD_STATION_CPE 0x0000 | |
| #define FRAD_STATION_NODE 0x0001 | |
| #define FRAD_TX_IGNORE_CIR 0x0001 | |
| #define FRAD_RX_ACCOUNT_CIR 0x0002 | |
| #define FRAD_DROP_ABORTED 0x0004 | |
| #define FRAD_BUFFERIF 0x0008 | |
| #define FRAD_STATS 0x0010 | |
| #define FRAD_MCI 0x0100 | |
| #define FRAD_AUTODLCI 0x8000 | |
| #define FRAD_VALID_FLAGS 0x811F | |
| #define FRAD_CLOCK_INT 0x0001 | |
| #define FRAD_CLOCK_EXT 0x0000 | |
| #endif /* _UAPI_FRAD_H_ */ |