| /* SPDX-License-Identifier: ((GPL-2.0-only WITH Linux-syscall-note) OR BSD-3-Clause) */ | |
| /* | |
| * linux/can/gw.h | |
| * | |
| * Definitions for CAN frame Gateway/Router/Bridge | |
| * | |
| * Author: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> | |
| * Copyright (c) 2011 Volkswagen Group Electronic Research | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * 2. Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution. | |
| * 3. Neither the name of Volkswagen nor the names of its contributors | |
| * may be used to endorse or promote products derived from this software | |
| * without specific prior written permission. | |
| * | |
| * Alternatively, provided that this notice is retained in full, this | |
| * software may be distributed under the terms of the GNU General | |
| * Public License ("GPL") version 2, in which case the provisions of the | |
| * GPL apply INSTEAD OF those given above. | |
| * | |
| * The provided data structures and external interfaces from this code | |
| * are not restricted to be used by modules with a GPL compatible license. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS | |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT | |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR | |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT | |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, | |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT | |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, | |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY | |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH | |
| * DAMAGE. | |
| */ | |
| #ifndef _UAPI_CAN_GW_H | |
| #define _UAPI_CAN_GW_H | |
| #include <linux/types.h> | |
| #include <linux/can.h> | |
| struct rtcanmsg { | |
| __u8 can_family; | |
| __u8 gwtype; | |
| __u16 flags; | |
| }; | |
| /* CAN gateway types */ | |
| enum { | |
| CGW_TYPE_UNSPEC, | |
| CGW_TYPE_CAN_CAN, /* CAN->CAN routing */ | |
| __CGW_TYPE_MAX | |
| }; | |
| #define CGW_TYPE_MAX (__CGW_TYPE_MAX - 1) | |
| /* CAN rtnetlink attribute definitions */ | |
| enum { | |
| CGW_UNSPEC, | |
| CGW_MOD_AND, /* CAN frame modification binary AND */ | |
| CGW_MOD_OR, /* CAN frame modification binary OR */ | |
| CGW_MOD_XOR, /* CAN frame modification binary XOR */ | |
| CGW_MOD_SET, /* CAN frame modification set alternate values */ | |
| CGW_CS_XOR, /* set data[] XOR checksum into data[index] */ | |
| CGW_CS_CRC8, /* set data[] CRC8 checksum into data[index] */ | |
| CGW_HANDLED, /* number of handled CAN frames */ | |
| CGW_DROPPED, /* number of dropped CAN frames */ | |
| CGW_SRC_IF, /* ifindex of source network interface */ | |
| CGW_DST_IF, /* ifindex of destination network interface */ | |
| CGW_FILTER, /* specify struct can_filter on source CAN device */ | |
| CGW_DELETED, /* number of deleted CAN frames (see max_hops param) */ | |
| CGW_LIM_HOPS, /* limit the number of hops of this specific rule */ | |
| CGW_MOD_UID, /* user defined identifier for modification updates */ | |
| CGW_FDMOD_AND, /* CAN FD frame modification binary AND */ | |
| CGW_FDMOD_OR, /* CAN FD frame modification binary OR */ | |
| CGW_FDMOD_XOR, /* CAN FD frame modification binary XOR */ | |
| CGW_FDMOD_SET, /* CAN FD frame modification set alternate values */ | |
| __CGW_MAX | |
| }; | |
| #define CGW_MAX (__CGW_MAX - 1) | |
| #define CGW_FLAGS_CAN_ECHO 0x01 | |
| #define CGW_FLAGS_CAN_SRC_TSTAMP 0x02 | |
| #define CGW_FLAGS_CAN_IIF_TX_OK 0x04 | |
| #define CGW_FLAGS_CAN_FD 0x08 | |
| #define CGW_MOD_FUNCS 4 /* AND OR XOR SET */ | |
| /* CAN frame elements that are affected by curr. 3 CAN frame modifications */ | |
| #define CGW_MOD_ID 0x01 | |
| #define CGW_MOD_DLC 0x02 /* contains the data length in bytes */ | |
| #define CGW_MOD_LEN CGW_MOD_DLC /* CAN FD length representation */ | |
| #define CGW_MOD_DATA 0x04 | |
| #define CGW_MOD_FLAGS 0x08 /* CAN FD flags */ | |
| #define CGW_FRAME_MODS 4 /* ID DLC/LEN DATA FLAGS */ | |
| #define MAX_MODFUNCTIONS (CGW_MOD_FUNCS * CGW_FRAME_MODS) | |
| struct cgw_frame_mod { | |
| struct can_frame cf; | |
| __u8 modtype; | |
| } __attribute__((packed)); | |
| struct cgw_fdframe_mod { | |
| struct canfd_frame cf; | |
| __u8 modtype; | |
| } __attribute__((packed)); | |
| #define CGW_MODATTR_LEN sizeof(struct cgw_frame_mod) | |
| #define CGW_FDMODATTR_LEN sizeof(struct cgw_fdframe_mod) | |
| struct cgw_csum_xor { | |
| __s8 from_idx; | |
| __s8 to_idx; | |
| __s8 result_idx; | |
| __u8 init_xor_val; | |
| } __attribute__((packed)); | |
| struct cgw_csum_crc8 { | |
| __s8 from_idx; | |
| __s8 to_idx; | |
| __s8 result_idx; | |
| __u8 init_crc_val; | |
| __u8 final_xor_val; | |
| __u8 crctab[256]; | |
| __u8 profile; | |
| __u8 profile_data[20]; | |
| } __attribute__((packed)); | |
| /* length of checksum operation parameters. idx = index in CAN frame data[] */ | |
| #define CGW_CS_XOR_LEN sizeof(struct cgw_csum_xor) | |
| #define CGW_CS_CRC8_LEN sizeof(struct cgw_csum_crc8) | |
| /* CRC8 profiles (compute CRC for additional data elements - see below) */ | |
| enum { | |
| CGW_CRC8PRF_UNSPEC, | |
| CGW_CRC8PRF_1U8, /* compute one additional u8 value */ | |
| CGW_CRC8PRF_16U8, /* u8 value table indexed by data[1] & 0xF */ | |
| CGW_CRC8PRF_SFFID_XOR, /* (can_id & 0xFF) ^ (can_id >> 8 & 0xFF) */ | |
| __CGW_CRC8PRF_MAX | |
| }; | |
| #define CGW_CRC8PRF_MAX (__CGW_CRC8PRF_MAX - 1) | |
| /* | |
| * CAN rtnetlink attribute contents in detail | |
| * | |
| * CGW_XXX_IF (length 4 bytes): | |
| * Sets an interface index for source/destination network interfaces. | |
| * For the CAN->CAN gwtype the indices of _two_ CAN interfaces are mandatory. | |
| * | |
| * CGW_FILTER (length 8 bytes): | |
| * Sets a CAN receive filter for the gateway job specified by the | |
| * struct can_filter described in include/linux/can.h | |
| * | |
| * CGW_MOD_(AND|OR|XOR|SET) (length 17 bytes): | |
| * Specifies a modification that's done to a received CAN frame before it is | |
| * send out to the destination interface. | |
| * | |
| * <struct can_frame> data used as operator | |
| * <u8> affected CAN frame elements | |
| * | |
| * CGW_LIM_HOPS (length 1 byte): | |
| * Limit the number of hops of this specific rule. Usually the received CAN | |
| * frame can be processed as much as 'max_hops' times (which is given at module | |
| * load time of the can-gw module). This value is used to reduce the number of | |
| * possible hops for this gateway rule to a value smaller then max_hops. | |
| * | |
| * CGW_MOD_UID (length 4 bytes): | |
| * Optional non-zero user defined routing job identifier to alter existing | |
| * modification settings at runtime. | |
| * | |
| * CGW_CS_XOR (length 4 bytes): | |
| * Set a simple XOR checksum starting with an initial value into | |
| * data[result-idx] using data[start-idx] .. data[end-idx] | |
| * | |
| * The XOR checksum is calculated like this: | |
| * | |
| * xor = init_xor_val | |
| * | |
| * for (i = from_idx .. to_idx) | |
| * xor ^= can_frame.data[i] | |
| * | |
| * can_frame.data[ result_idx ] = xor | |
| * | |
| * CGW_CS_CRC8 (length 282 bytes): | |
| * Set a CRC8 value into data[result-idx] using a given 256 byte CRC8 table, | |
| * a given initial value and a defined input data[start-idx] .. data[end-idx]. | |
| * Finally the result value is XOR'ed with the final_xor_val. | |
| * | |
| * The CRC8 checksum is calculated like this: | |
| * | |
| * crc = init_crc_val | |
| * | |
| * for (i = from_idx .. to_idx) | |
| * crc = crctab[ crc ^ can_frame.data[i] ] | |
| * | |
| * can_frame.data[ result_idx ] = crc ^ final_xor_val | |
| * | |
| * The calculated CRC may contain additional source data elements that can be | |
| * defined in the handling of 'checksum profiles' e.g. shown in AUTOSAR specs | |
| * like http://www.autosar.org/download/R4.0/AUTOSAR_SWS_E2ELibrary.pdf | |
| * E.g. the profile_data[] may contain additional u8 values (called DATA_IDs) | |
| * that are used depending on counter values inside the CAN frame data[]. | |
| * So far only three profiles have been implemented for illustration. | |
| * | |
| * Remark: In general the attribute data is a linear buffer. | |
| * Beware of sending unpacked or aligned structs! | |
| */ | |
| #endif /* !_UAPI_CAN_GW_H */ |