| /* | 
 |  * Copyright (C) 2003 Sistina Software Limited. | 
 |  * Copyright (C) 2004-2005 Red Hat, Inc. All rights reserved. | 
 |  * | 
 |  * This file is released under the GPL. | 
 |  */ | 
 |  | 
 | #include <linux/device-mapper.h> | 
 |  | 
 | #include "dm-rq.h" | 
 | #include "dm-bio-record.h" | 
 | #include "dm-path-selector.h" | 
 | #include "dm-uevent.h" | 
 |  | 
 | #include <linux/blkdev.h> | 
 | #include <linux/ctype.h> | 
 | #include <linux/init.h> | 
 | #include <linux/mempool.h> | 
 | #include <linux/module.h> | 
 | #include <linux/pagemap.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/time.h> | 
 | #include <linux/timer.h> | 
 | #include <linux/workqueue.h> | 
 | #include <linux/delay.h> | 
 | #include <scsi/scsi_dh.h> | 
 | #include <linux/atomic.h> | 
 | #include <linux/blk-mq.h> | 
 |  | 
 | #define DM_MSG_PREFIX "multipath" | 
 | #define DM_PG_INIT_DELAY_MSECS 2000 | 
 | #define DM_PG_INIT_DELAY_DEFAULT ((unsigned int) -1) | 
 | #define QUEUE_IF_NO_PATH_TIMEOUT_DEFAULT 0 | 
 |  | 
 | static unsigned long queue_if_no_path_timeout_secs = QUEUE_IF_NO_PATH_TIMEOUT_DEFAULT; | 
 |  | 
 | /* Path properties */ | 
 | struct pgpath { | 
 | 	struct list_head list; | 
 |  | 
 | 	struct priority_group *pg;	/* Owning PG */ | 
 | 	unsigned int fail_count;		/* Cumulative failure count */ | 
 |  | 
 | 	struct dm_path path; | 
 | 	struct delayed_work activate_path; | 
 |  | 
 | 	bool is_active:1;		/* Path status */ | 
 | }; | 
 |  | 
 | #define path_to_pgpath(__pgp) container_of((__pgp), struct pgpath, path) | 
 |  | 
 | /* | 
 |  * Paths are grouped into Priority Groups and numbered from 1 upwards. | 
 |  * Each has a path selector which controls which path gets used. | 
 |  */ | 
 | struct priority_group { | 
 | 	struct list_head list; | 
 |  | 
 | 	struct multipath *m;		/* Owning multipath instance */ | 
 | 	struct path_selector ps; | 
 |  | 
 | 	unsigned int pg_num;		/* Reference number */ | 
 | 	unsigned int nr_pgpaths;		/* Number of paths in PG */ | 
 | 	struct list_head pgpaths; | 
 |  | 
 | 	bool bypassed:1;		/* Temporarily bypass this PG? */ | 
 | }; | 
 |  | 
 | /* Multipath context */ | 
 | struct multipath { | 
 | 	unsigned long flags;		/* Multipath state flags */ | 
 |  | 
 | 	spinlock_t lock; | 
 | 	enum dm_queue_mode queue_mode; | 
 |  | 
 | 	struct pgpath *current_pgpath; | 
 | 	struct priority_group *current_pg; | 
 | 	struct priority_group *next_pg;	/* Switch to this PG if set */ | 
 |  | 
 | 	atomic_t nr_valid_paths;	/* Total number of usable paths */ | 
 | 	unsigned int nr_priority_groups; | 
 | 	struct list_head priority_groups; | 
 |  | 
 | 	const char *hw_handler_name; | 
 | 	char *hw_handler_params; | 
 | 	wait_queue_head_t pg_init_wait;	/* Wait for pg_init completion */ | 
 | 	unsigned int pg_init_retries;	/* Number of times to retry pg_init */ | 
 | 	unsigned int pg_init_delay_msecs;	/* Number of msecs before pg_init retry */ | 
 | 	atomic_t pg_init_in_progress;	/* Only one pg_init allowed at once */ | 
 | 	atomic_t pg_init_count;		/* Number of times pg_init called */ | 
 |  | 
 | 	struct mutex work_mutex; | 
 | 	struct work_struct trigger_event; | 
 | 	struct dm_target *ti; | 
 |  | 
 | 	struct work_struct process_queued_bios; | 
 | 	struct bio_list queued_bios; | 
 |  | 
 | 	struct timer_list nopath_timer;	/* Timeout for queue_if_no_path */ | 
 | }; | 
 |  | 
 | /* | 
 |  * Context information attached to each io we process. | 
 |  */ | 
 | struct dm_mpath_io { | 
 | 	struct pgpath *pgpath; | 
 | 	size_t nr_bytes; | 
 | 	u64 start_time_ns; | 
 | }; | 
 |  | 
 | typedef int (*action_fn) (struct pgpath *pgpath); | 
 |  | 
 | static struct workqueue_struct *kmultipathd, *kmpath_handlerd; | 
 | static void trigger_event(struct work_struct *work); | 
 | static void activate_or_offline_path(struct pgpath *pgpath); | 
 | static void activate_path_work(struct work_struct *work); | 
 | static void process_queued_bios(struct work_struct *work); | 
 | static void queue_if_no_path_timeout_work(struct timer_list *t); | 
 |  | 
 | /*----------------------------------------------- | 
 |  * Multipath state flags. | 
 |  *-----------------------------------------------*/ | 
 |  | 
 | #define MPATHF_QUEUE_IO 0			/* Must we queue all I/O? */ | 
 | #define MPATHF_QUEUE_IF_NO_PATH 1		/* Queue I/O if last path fails? */ | 
 | #define MPATHF_SAVED_QUEUE_IF_NO_PATH 2		/* Saved state during suspension */ | 
 | #define MPATHF_RETAIN_ATTACHED_HW_HANDLER 3	/* If there's already a hw_handler present, don't change it. */ | 
 | #define MPATHF_PG_INIT_DISABLED 4		/* pg_init is not currently allowed */ | 
 | #define MPATHF_PG_INIT_REQUIRED 5		/* pg_init needs calling? */ | 
 | #define MPATHF_PG_INIT_DELAY_RETRY 6		/* Delay pg_init retry? */ | 
 |  | 
 | static bool mpath_double_check_test_bit(int MPATHF_bit, struct multipath *m) | 
 | { | 
 | 	bool r = test_bit(MPATHF_bit, &m->flags); | 
 |  | 
 | 	if (r) { | 
 | 		unsigned long flags; | 
 | 		spin_lock_irqsave(&m->lock, flags); | 
 | 		r = test_bit(MPATHF_bit, &m->flags); | 
 | 		spin_unlock_irqrestore(&m->lock, flags); | 
 | 	} | 
 |  | 
 | 	return r; | 
 | } | 
 |  | 
 | /*----------------------------------------------- | 
 |  * Allocation routines | 
 |  *-----------------------------------------------*/ | 
 |  | 
 | static struct pgpath *alloc_pgpath(void) | 
 | { | 
 | 	struct pgpath *pgpath = kzalloc(sizeof(*pgpath), GFP_KERNEL); | 
 |  | 
 | 	if (!pgpath) | 
 | 		return NULL; | 
 |  | 
 | 	pgpath->is_active = true; | 
 |  | 
 | 	return pgpath; | 
 | } | 
 |  | 
 | static void free_pgpath(struct pgpath *pgpath) | 
 | { | 
 | 	kfree(pgpath); | 
 | } | 
 |  | 
 | static struct priority_group *alloc_priority_group(void) | 
 | { | 
 | 	struct priority_group *pg; | 
 |  | 
 | 	pg = kzalloc(sizeof(*pg), GFP_KERNEL); | 
 |  | 
 | 	if (pg) | 
 | 		INIT_LIST_HEAD(&pg->pgpaths); | 
 |  | 
 | 	return pg; | 
 | } | 
 |  | 
 | static void free_pgpaths(struct list_head *pgpaths, struct dm_target *ti) | 
 | { | 
 | 	struct pgpath *pgpath, *tmp; | 
 |  | 
 | 	list_for_each_entry_safe(pgpath, tmp, pgpaths, list) { | 
 | 		list_del(&pgpath->list); | 
 | 		dm_put_device(ti, pgpath->path.dev); | 
 | 		free_pgpath(pgpath); | 
 | 	} | 
 | } | 
 |  | 
 | static void free_priority_group(struct priority_group *pg, | 
 | 				struct dm_target *ti) | 
 | { | 
 | 	struct path_selector *ps = &pg->ps; | 
 |  | 
 | 	if (ps->type) { | 
 | 		ps->type->destroy(ps); | 
 | 		dm_put_path_selector(ps->type); | 
 | 	} | 
 |  | 
 | 	free_pgpaths(&pg->pgpaths, ti); | 
 | 	kfree(pg); | 
 | } | 
 |  | 
 | static struct multipath *alloc_multipath(struct dm_target *ti) | 
 | { | 
 | 	struct multipath *m; | 
 |  | 
 | 	m = kzalloc(sizeof(*m), GFP_KERNEL); | 
 | 	if (m) { | 
 | 		INIT_LIST_HEAD(&m->priority_groups); | 
 | 		spin_lock_init(&m->lock); | 
 | 		atomic_set(&m->nr_valid_paths, 0); | 
 | 		INIT_WORK(&m->trigger_event, trigger_event); | 
 | 		mutex_init(&m->work_mutex); | 
 |  | 
 | 		m->queue_mode = DM_TYPE_NONE; | 
 |  | 
 | 		m->ti = ti; | 
 | 		ti->private = m; | 
 |  | 
 | 		timer_setup(&m->nopath_timer, queue_if_no_path_timeout_work, 0); | 
 | 	} | 
 |  | 
 | 	return m; | 
 | } | 
 |  | 
 | static int alloc_multipath_stage2(struct dm_target *ti, struct multipath *m) | 
 | { | 
 | 	if (m->queue_mode == DM_TYPE_NONE) { | 
 | 		m->queue_mode = DM_TYPE_REQUEST_BASED; | 
 | 	} else if (m->queue_mode == DM_TYPE_BIO_BASED) { | 
 | 		INIT_WORK(&m->process_queued_bios, process_queued_bios); | 
 | 		/* | 
 | 		 * bio-based doesn't support any direct scsi_dh management; | 
 | 		 * it just discovers if a scsi_dh is attached. | 
 | 		 */ | 
 | 		set_bit(MPATHF_RETAIN_ATTACHED_HW_HANDLER, &m->flags); | 
 | 	} | 
 |  | 
 | 	dm_table_set_type(ti->table, m->queue_mode); | 
 |  | 
 | 	/* | 
 | 	 * Init fields that are only used when a scsi_dh is attached | 
 | 	 * - must do this unconditionally (really doesn't hurt non-SCSI uses) | 
 | 	 */ | 
 | 	set_bit(MPATHF_QUEUE_IO, &m->flags); | 
 | 	atomic_set(&m->pg_init_in_progress, 0); | 
 | 	atomic_set(&m->pg_init_count, 0); | 
 | 	m->pg_init_delay_msecs = DM_PG_INIT_DELAY_DEFAULT; | 
 | 	init_waitqueue_head(&m->pg_init_wait); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void free_multipath(struct multipath *m) | 
 | { | 
 | 	struct priority_group *pg, *tmp; | 
 |  | 
 | 	list_for_each_entry_safe(pg, tmp, &m->priority_groups, list) { | 
 | 		list_del(&pg->list); | 
 | 		free_priority_group(pg, m->ti); | 
 | 	} | 
 |  | 
 | 	kfree(m->hw_handler_name); | 
 | 	kfree(m->hw_handler_params); | 
 | 	mutex_destroy(&m->work_mutex); | 
 | 	kfree(m); | 
 | } | 
 |  | 
 | static struct dm_mpath_io *get_mpio(union map_info *info) | 
 | { | 
 | 	return info->ptr; | 
 | } | 
 |  | 
 | static size_t multipath_per_bio_data_size(void) | 
 | { | 
 | 	return sizeof(struct dm_mpath_io) + sizeof(struct dm_bio_details); | 
 | } | 
 |  | 
 | static struct dm_mpath_io *get_mpio_from_bio(struct bio *bio) | 
 | { | 
 | 	return dm_per_bio_data(bio, multipath_per_bio_data_size()); | 
 | } | 
 |  | 
 | static struct dm_bio_details *get_bio_details_from_mpio(struct dm_mpath_io *mpio) | 
 | { | 
 | 	/* dm_bio_details is immediately after the dm_mpath_io in bio's per-bio-data */ | 
 | 	void *bio_details = mpio + 1; | 
 | 	return bio_details; | 
 | } | 
 |  | 
 | static void multipath_init_per_bio_data(struct bio *bio, struct dm_mpath_io **mpio_p) | 
 | { | 
 | 	struct dm_mpath_io *mpio = get_mpio_from_bio(bio); | 
 | 	struct dm_bio_details *bio_details = get_bio_details_from_mpio(mpio); | 
 |  | 
 | 	mpio->nr_bytes = bio->bi_iter.bi_size; | 
 | 	mpio->pgpath = NULL; | 
 | 	mpio->start_time_ns = 0; | 
 | 	*mpio_p = mpio; | 
 |  | 
 | 	dm_bio_record(bio_details, bio); | 
 | } | 
 |  | 
 | /*----------------------------------------------- | 
 |  * Path selection | 
 |  *-----------------------------------------------*/ | 
 |  | 
 | static int __pg_init_all_paths(struct multipath *m) | 
 | { | 
 | 	struct pgpath *pgpath; | 
 | 	unsigned long pg_init_delay = 0; | 
 |  | 
 | 	lockdep_assert_held(&m->lock); | 
 |  | 
 | 	if (atomic_read(&m->pg_init_in_progress) || test_bit(MPATHF_PG_INIT_DISABLED, &m->flags)) | 
 | 		return 0; | 
 |  | 
 | 	atomic_inc(&m->pg_init_count); | 
 | 	clear_bit(MPATHF_PG_INIT_REQUIRED, &m->flags); | 
 |  | 
 | 	/* Check here to reset pg_init_required */ | 
 | 	if (!m->current_pg) | 
 | 		return 0; | 
 |  | 
 | 	if (test_bit(MPATHF_PG_INIT_DELAY_RETRY, &m->flags)) | 
 | 		pg_init_delay = msecs_to_jiffies(m->pg_init_delay_msecs != DM_PG_INIT_DELAY_DEFAULT ? | 
 | 						 m->pg_init_delay_msecs : DM_PG_INIT_DELAY_MSECS); | 
 | 	list_for_each_entry(pgpath, &m->current_pg->pgpaths, list) { | 
 | 		/* Skip failed paths */ | 
 | 		if (!pgpath->is_active) | 
 | 			continue; | 
 | 		if (queue_delayed_work(kmpath_handlerd, &pgpath->activate_path, | 
 | 				       pg_init_delay)) | 
 | 			atomic_inc(&m->pg_init_in_progress); | 
 | 	} | 
 | 	return atomic_read(&m->pg_init_in_progress); | 
 | } | 
 |  | 
 | static int pg_init_all_paths(struct multipath *m) | 
 | { | 
 | 	int ret; | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&m->lock, flags); | 
 | 	ret = __pg_init_all_paths(m); | 
 | 	spin_unlock_irqrestore(&m->lock, flags); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void __switch_pg(struct multipath *m, struct priority_group *pg) | 
 | { | 
 | 	lockdep_assert_held(&m->lock); | 
 |  | 
 | 	m->current_pg = pg; | 
 |  | 
 | 	/* Must we initialise the PG first, and queue I/O till it's ready? */ | 
 | 	if (m->hw_handler_name) { | 
 | 		set_bit(MPATHF_PG_INIT_REQUIRED, &m->flags); | 
 | 		set_bit(MPATHF_QUEUE_IO, &m->flags); | 
 | 	} else { | 
 | 		clear_bit(MPATHF_PG_INIT_REQUIRED, &m->flags); | 
 | 		clear_bit(MPATHF_QUEUE_IO, &m->flags); | 
 | 	} | 
 |  | 
 | 	atomic_set(&m->pg_init_count, 0); | 
 | } | 
 |  | 
 | static struct pgpath *choose_path_in_pg(struct multipath *m, | 
 | 					struct priority_group *pg, | 
 | 					size_t nr_bytes) | 
 | { | 
 | 	unsigned long flags; | 
 | 	struct dm_path *path; | 
 | 	struct pgpath *pgpath; | 
 |  | 
 | 	path = pg->ps.type->select_path(&pg->ps, nr_bytes); | 
 | 	if (!path) | 
 | 		return ERR_PTR(-ENXIO); | 
 |  | 
 | 	pgpath = path_to_pgpath(path); | 
 |  | 
 | 	if (unlikely(READ_ONCE(m->current_pg) != pg)) { | 
 | 		/* Only update current_pgpath if pg changed */ | 
 | 		spin_lock_irqsave(&m->lock, flags); | 
 | 		m->current_pgpath = pgpath; | 
 | 		__switch_pg(m, pg); | 
 | 		spin_unlock_irqrestore(&m->lock, flags); | 
 | 	} | 
 |  | 
 | 	return pgpath; | 
 | } | 
 |  | 
 | static struct pgpath *choose_pgpath(struct multipath *m, size_t nr_bytes) | 
 | { | 
 | 	unsigned long flags; | 
 | 	struct priority_group *pg; | 
 | 	struct pgpath *pgpath; | 
 | 	unsigned int bypassed = 1; | 
 |  | 
 | 	if (!atomic_read(&m->nr_valid_paths)) { | 
 | 		spin_lock_irqsave(&m->lock, flags); | 
 | 		clear_bit(MPATHF_QUEUE_IO, &m->flags); | 
 | 		spin_unlock_irqrestore(&m->lock, flags); | 
 | 		goto failed; | 
 | 	} | 
 |  | 
 | 	/* Were we instructed to switch PG? */ | 
 | 	if (READ_ONCE(m->next_pg)) { | 
 | 		spin_lock_irqsave(&m->lock, flags); | 
 | 		pg = m->next_pg; | 
 | 		if (!pg) { | 
 | 			spin_unlock_irqrestore(&m->lock, flags); | 
 | 			goto check_current_pg; | 
 | 		} | 
 | 		m->next_pg = NULL; | 
 | 		spin_unlock_irqrestore(&m->lock, flags); | 
 | 		pgpath = choose_path_in_pg(m, pg, nr_bytes); | 
 | 		if (!IS_ERR_OR_NULL(pgpath)) | 
 | 			return pgpath; | 
 | 	} | 
 |  | 
 | 	/* Don't change PG until it has no remaining paths */ | 
 | check_current_pg: | 
 | 	pg = READ_ONCE(m->current_pg); | 
 | 	if (pg) { | 
 | 		pgpath = choose_path_in_pg(m, pg, nr_bytes); | 
 | 		if (!IS_ERR_OR_NULL(pgpath)) | 
 | 			return pgpath; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Loop through priority groups until we find a valid path. | 
 | 	 * First time we skip PGs marked 'bypassed'. | 
 | 	 * Second time we only try the ones we skipped, but set | 
 | 	 * pg_init_delay_retry so we do not hammer controllers. | 
 | 	 */ | 
 | 	do { | 
 | 		list_for_each_entry(pg, &m->priority_groups, list) { | 
 | 			if (pg->bypassed == !!bypassed) | 
 | 				continue; | 
 | 			pgpath = choose_path_in_pg(m, pg, nr_bytes); | 
 | 			if (!IS_ERR_OR_NULL(pgpath)) { | 
 | 				if (!bypassed) { | 
 | 					spin_lock_irqsave(&m->lock, flags); | 
 | 					set_bit(MPATHF_PG_INIT_DELAY_RETRY, &m->flags); | 
 | 					spin_unlock_irqrestore(&m->lock, flags); | 
 | 				} | 
 | 				return pgpath; | 
 | 			} | 
 | 		} | 
 | 	} while (bypassed--); | 
 |  | 
 | failed: | 
 | 	spin_lock_irqsave(&m->lock, flags); | 
 | 	m->current_pgpath = NULL; | 
 | 	m->current_pg = NULL; | 
 | 	spin_unlock_irqrestore(&m->lock, flags); | 
 |  | 
 | 	return NULL; | 
 | } | 
 |  | 
 | /* | 
 |  * dm_report_EIO() is a macro instead of a function to make pr_debug_ratelimited() | 
 |  * report the function name and line number of the function from which | 
 |  * it has been invoked. | 
 |  */ | 
 | #define dm_report_EIO(m)						\ | 
 | do {									\ | 
 | 	DMDEBUG_LIMIT("%s: returning EIO; QIFNP = %d; SQIFNP = %d; DNFS = %d", \ | 
 | 		      dm_table_device_name((m)->ti->table),		\ | 
 | 		      test_bit(MPATHF_QUEUE_IF_NO_PATH, &(m)->flags),	\ | 
 | 		      test_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &(m)->flags), \ | 
 | 		      dm_noflush_suspending((m)->ti));			\ | 
 | } while (0) | 
 |  | 
 | /* | 
 |  * Check whether bios must be queued in the device-mapper core rather | 
 |  * than here in the target. | 
 |  */ | 
 | static bool __must_push_back(struct multipath *m) | 
 | { | 
 | 	return dm_noflush_suspending(m->ti); | 
 | } | 
 |  | 
 | static bool must_push_back_rq(struct multipath *m) | 
 | { | 
 | 	unsigned long flags; | 
 | 	bool ret; | 
 |  | 
 | 	spin_lock_irqsave(&m->lock, flags); | 
 | 	ret = (test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags) || __must_push_back(m)); | 
 | 	spin_unlock_irqrestore(&m->lock, flags); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * Map cloned requests (request-based multipath) | 
 |  */ | 
 | static int multipath_clone_and_map(struct dm_target *ti, struct request *rq, | 
 | 				   union map_info *map_context, | 
 | 				   struct request **__clone) | 
 | { | 
 | 	struct multipath *m = ti->private; | 
 | 	size_t nr_bytes = blk_rq_bytes(rq); | 
 | 	struct pgpath *pgpath; | 
 | 	struct block_device *bdev; | 
 | 	struct dm_mpath_io *mpio = get_mpio(map_context); | 
 | 	struct request_queue *q; | 
 | 	struct request *clone; | 
 |  | 
 | 	/* Do we need to select a new pgpath? */ | 
 | 	pgpath = READ_ONCE(m->current_pgpath); | 
 | 	if (!pgpath || !mpath_double_check_test_bit(MPATHF_QUEUE_IO, m)) | 
 | 		pgpath = choose_pgpath(m, nr_bytes); | 
 |  | 
 | 	if (!pgpath) { | 
 | 		if (must_push_back_rq(m)) | 
 | 			return DM_MAPIO_DELAY_REQUEUE; | 
 | 		dm_report_EIO(m);	/* Failed */ | 
 | 		return DM_MAPIO_KILL; | 
 | 	} else if (mpath_double_check_test_bit(MPATHF_QUEUE_IO, m) || | 
 | 		   mpath_double_check_test_bit(MPATHF_PG_INIT_REQUIRED, m)) { | 
 | 		pg_init_all_paths(m); | 
 | 		return DM_MAPIO_DELAY_REQUEUE; | 
 | 	} | 
 |  | 
 | 	mpio->pgpath = pgpath; | 
 | 	mpio->nr_bytes = nr_bytes; | 
 |  | 
 | 	bdev = pgpath->path.dev->bdev; | 
 | 	q = bdev_get_queue(bdev); | 
 | 	clone = blk_mq_alloc_request(q, rq->cmd_flags | REQ_NOMERGE, | 
 | 			BLK_MQ_REQ_NOWAIT); | 
 | 	if (IS_ERR(clone)) { | 
 | 		/* EBUSY, ENODEV or EWOULDBLOCK: requeue */ | 
 | 		if (blk_queue_dying(q)) { | 
 | 			atomic_inc(&m->pg_init_in_progress); | 
 | 			activate_or_offline_path(pgpath); | 
 | 			return DM_MAPIO_DELAY_REQUEUE; | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * blk-mq's SCHED_RESTART can cover this requeue, so we | 
 | 		 * needn't deal with it by DELAY_REQUEUE. More importantly, | 
 | 		 * we have to return DM_MAPIO_REQUEUE so that blk-mq can | 
 | 		 * get the queue busy feedback (via BLK_STS_RESOURCE), | 
 | 		 * otherwise I/O merging can suffer. | 
 | 		 */ | 
 | 		return DM_MAPIO_REQUEUE; | 
 | 	} | 
 | 	clone->bio = clone->biotail = NULL; | 
 | 	clone->cmd_flags |= REQ_FAILFAST_TRANSPORT; | 
 | 	*__clone = clone; | 
 |  | 
 | 	if (pgpath->pg->ps.type->start_io) | 
 | 		pgpath->pg->ps.type->start_io(&pgpath->pg->ps, | 
 | 					      &pgpath->path, | 
 | 					      nr_bytes); | 
 | 	return DM_MAPIO_REMAPPED; | 
 | } | 
 |  | 
 | static void multipath_release_clone(struct request *clone, | 
 | 				    union map_info *map_context) | 
 | { | 
 | 	if (unlikely(map_context)) { | 
 | 		/* | 
 | 		 * non-NULL map_context means caller is still map | 
 | 		 * method; must undo multipath_clone_and_map() | 
 | 		 */ | 
 | 		struct dm_mpath_io *mpio = get_mpio(map_context); | 
 | 		struct pgpath *pgpath = mpio->pgpath; | 
 |  | 
 | 		if (pgpath && pgpath->pg->ps.type->end_io) | 
 | 			pgpath->pg->ps.type->end_io(&pgpath->pg->ps, | 
 | 						    &pgpath->path, | 
 | 						    mpio->nr_bytes, | 
 | 						    clone->io_start_time_ns); | 
 | 	} | 
 |  | 
 | 	blk_mq_free_request(clone); | 
 | } | 
 |  | 
 | /* | 
 |  * Map cloned bios (bio-based multipath) | 
 |  */ | 
 |  | 
 | static void __multipath_queue_bio(struct multipath *m, struct bio *bio) | 
 | { | 
 | 	/* Queue for the daemon to resubmit */ | 
 | 	bio_list_add(&m->queued_bios, bio); | 
 | 	if (!test_bit(MPATHF_QUEUE_IO, &m->flags)) | 
 | 		queue_work(kmultipathd, &m->process_queued_bios); | 
 | } | 
 |  | 
 | static void multipath_queue_bio(struct multipath *m, struct bio *bio) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&m->lock, flags); | 
 | 	__multipath_queue_bio(m, bio); | 
 | 	spin_unlock_irqrestore(&m->lock, flags); | 
 | } | 
 |  | 
 | static struct pgpath *__map_bio(struct multipath *m, struct bio *bio) | 
 | { | 
 | 	struct pgpath *pgpath; | 
 | 	unsigned long flags; | 
 |  | 
 | 	/* Do we need to select a new pgpath? */ | 
 | 	pgpath = READ_ONCE(m->current_pgpath); | 
 | 	if (!pgpath || !mpath_double_check_test_bit(MPATHF_QUEUE_IO, m)) | 
 | 		pgpath = choose_pgpath(m, bio->bi_iter.bi_size); | 
 |  | 
 | 	if (!pgpath) { | 
 | 		spin_lock_irqsave(&m->lock, flags); | 
 | 		if (test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)) { | 
 | 			__multipath_queue_bio(m, bio); | 
 | 			pgpath = ERR_PTR(-EAGAIN); | 
 | 		} | 
 | 		spin_unlock_irqrestore(&m->lock, flags); | 
 |  | 
 | 	} else if (mpath_double_check_test_bit(MPATHF_QUEUE_IO, m) || | 
 | 		   mpath_double_check_test_bit(MPATHF_PG_INIT_REQUIRED, m)) { | 
 | 		multipath_queue_bio(m, bio); | 
 | 		pg_init_all_paths(m); | 
 | 		return ERR_PTR(-EAGAIN); | 
 | 	} | 
 |  | 
 | 	return pgpath; | 
 | } | 
 |  | 
 | static int __multipath_map_bio(struct multipath *m, struct bio *bio, | 
 | 			       struct dm_mpath_io *mpio) | 
 | { | 
 | 	struct pgpath *pgpath = __map_bio(m, bio); | 
 |  | 
 | 	if (IS_ERR(pgpath)) | 
 | 		return DM_MAPIO_SUBMITTED; | 
 |  | 
 | 	if (!pgpath) { | 
 | 		if (__must_push_back(m)) | 
 | 			return DM_MAPIO_REQUEUE; | 
 | 		dm_report_EIO(m); | 
 | 		return DM_MAPIO_KILL; | 
 | 	} | 
 |  | 
 | 	mpio->pgpath = pgpath; | 
 |  | 
 | 	if (dm_ps_use_hr_timer(pgpath->pg->ps.type)) | 
 | 		mpio->start_time_ns = ktime_get_ns(); | 
 |  | 
 | 	bio->bi_status = 0; | 
 | 	bio_set_dev(bio, pgpath->path.dev->bdev); | 
 | 	bio->bi_opf |= REQ_FAILFAST_TRANSPORT; | 
 |  | 
 | 	if (pgpath->pg->ps.type->start_io) | 
 | 		pgpath->pg->ps.type->start_io(&pgpath->pg->ps, | 
 | 					      &pgpath->path, | 
 | 					      mpio->nr_bytes); | 
 | 	return DM_MAPIO_REMAPPED; | 
 | } | 
 |  | 
 | static int multipath_map_bio(struct dm_target *ti, struct bio *bio) | 
 | { | 
 | 	struct multipath *m = ti->private; | 
 | 	struct dm_mpath_io *mpio = NULL; | 
 |  | 
 | 	multipath_init_per_bio_data(bio, &mpio); | 
 | 	return __multipath_map_bio(m, bio, mpio); | 
 | } | 
 |  | 
 | static void process_queued_io_list(struct multipath *m) | 
 | { | 
 | 	if (m->queue_mode == DM_TYPE_REQUEST_BASED) | 
 | 		dm_mq_kick_requeue_list(dm_table_get_md(m->ti->table)); | 
 | 	else if (m->queue_mode == DM_TYPE_BIO_BASED) | 
 | 		queue_work(kmultipathd, &m->process_queued_bios); | 
 | } | 
 |  | 
 | static void process_queued_bios(struct work_struct *work) | 
 | { | 
 | 	int r; | 
 | 	unsigned long flags; | 
 | 	struct bio *bio; | 
 | 	struct bio_list bios; | 
 | 	struct blk_plug plug; | 
 | 	struct multipath *m = | 
 | 		container_of(work, struct multipath, process_queued_bios); | 
 |  | 
 | 	bio_list_init(&bios); | 
 |  | 
 | 	spin_lock_irqsave(&m->lock, flags); | 
 |  | 
 | 	if (bio_list_empty(&m->queued_bios)) { | 
 | 		spin_unlock_irqrestore(&m->lock, flags); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	bio_list_merge(&bios, &m->queued_bios); | 
 | 	bio_list_init(&m->queued_bios); | 
 |  | 
 | 	spin_unlock_irqrestore(&m->lock, flags); | 
 |  | 
 | 	blk_start_plug(&plug); | 
 | 	while ((bio = bio_list_pop(&bios))) { | 
 | 		struct dm_mpath_io *mpio = get_mpio_from_bio(bio); | 
 | 		dm_bio_restore(get_bio_details_from_mpio(mpio), bio); | 
 | 		r = __multipath_map_bio(m, bio, mpio); | 
 | 		switch (r) { | 
 | 		case DM_MAPIO_KILL: | 
 | 			bio->bi_status = BLK_STS_IOERR; | 
 | 			bio_endio(bio); | 
 | 			break; | 
 | 		case DM_MAPIO_REQUEUE: | 
 | 			bio->bi_status = BLK_STS_DM_REQUEUE; | 
 | 			bio_endio(bio); | 
 | 			break; | 
 | 		case DM_MAPIO_REMAPPED: | 
 | 			submit_bio_noacct(bio); | 
 | 			break; | 
 | 		case DM_MAPIO_SUBMITTED: | 
 | 			break; | 
 | 		default: | 
 | 			WARN_ONCE(true, "__multipath_map_bio() returned %d\n", r); | 
 | 		} | 
 | 	} | 
 | 	blk_finish_plug(&plug); | 
 | } | 
 |  | 
 | /* | 
 |  * If we run out of usable paths, should we queue I/O or error it? | 
 |  */ | 
 | static int queue_if_no_path(struct multipath *m, bool queue_if_no_path, | 
 | 			    bool save_old_value, const char *caller) | 
 | { | 
 | 	unsigned long flags; | 
 | 	bool queue_if_no_path_bit, saved_queue_if_no_path_bit; | 
 | 	const char *dm_dev_name = dm_table_device_name(m->ti->table); | 
 |  | 
 | 	DMDEBUG("%s: %s caller=%s queue_if_no_path=%d save_old_value=%d", | 
 | 		dm_dev_name, __func__, caller, queue_if_no_path, save_old_value); | 
 |  | 
 | 	spin_lock_irqsave(&m->lock, flags); | 
 |  | 
 | 	queue_if_no_path_bit = test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags); | 
 | 	saved_queue_if_no_path_bit = test_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags); | 
 |  | 
 | 	if (save_old_value) { | 
 | 		if (unlikely(!queue_if_no_path_bit && saved_queue_if_no_path_bit)) { | 
 | 			DMERR("%s: QIFNP disabled but saved as enabled, saving again loses state, not saving!", | 
 | 			      dm_dev_name); | 
 | 		} else | 
 | 			assign_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags, queue_if_no_path_bit); | 
 | 	} else if (!queue_if_no_path && saved_queue_if_no_path_bit) { | 
 | 		/* due to "fail_if_no_path" message, need to honor it. */ | 
 | 		clear_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags); | 
 | 	} | 
 | 	assign_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags, queue_if_no_path); | 
 |  | 
 | 	DMDEBUG("%s: after %s changes; QIFNP = %d; SQIFNP = %d; DNFS = %d", | 
 | 		dm_dev_name, __func__, | 
 | 		test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags), | 
 | 		test_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags), | 
 | 		dm_noflush_suspending(m->ti)); | 
 |  | 
 | 	spin_unlock_irqrestore(&m->lock, flags); | 
 |  | 
 | 	if (!queue_if_no_path) { | 
 | 		dm_table_run_md_queue_async(m->ti->table); | 
 | 		process_queued_io_list(m); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * If the queue_if_no_path timeout fires, turn off queue_if_no_path and | 
 |  * process any queued I/O. | 
 |  */ | 
 | static void queue_if_no_path_timeout_work(struct timer_list *t) | 
 | { | 
 | 	struct multipath *m = from_timer(m, t, nopath_timer); | 
 |  | 
 | 	DMWARN("queue_if_no_path timeout on %s, failing queued IO", | 
 | 	       dm_table_device_name(m->ti->table)); | 
 | 	queue_if_no_path(m, false, false, __func__); | 
 | } | 
 |  | 
 | /* | 
 |  * Enable the queue_if_no_path timeout if necessary. | 
 |  * Called with m->lock held. | 
 |  */ | 
 | static void enable_nopath_timeout(struct multipath *m) | 
 | { | 
 | 	unsigned long queue_if_no_path_timeout = | 
 | 		READ_ONCE(queue_if_no_path_timeout_secs) * HZ; | 
 |  | 
 | 	lockdep_assert_held(&m->lock); | 
 |  | 
 | 	if (queue_if_no_path_timeout > 0 && | 
 | 	    atomic_read(&m->nr_valid_paths) == 0 && | 
 | 	    test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)) { | 
 | 		mod_timer(&m->nopath_timer, | 
 | 			  jiffies + queue_if_no_path_timeout); | 
 | 	} | 
 | } | 
 |  | 
 | static void disable_nopath_timeout(struct multipath *m) | 
 | { | 
 | 	del_timer_sync(&m->nopath_timer); | 
 | } | 
 |  | 
 | /* | 
 |  * An event is triggered whenever a path is taken out of use. | 
 |  * Includes path failure and PG bypass. | 
 |  */ | 
 | static void trigger_event(struct work_struct *work) | 
 | { | 
 | 	struct multipath *m = | 
 | 		container_of(work, struct multipath, trigger_event); | 
 |  | 
 | 	dm_table_event(m->ti->table); | 
 | } | 
 |  | 
 | /*----------------------------------------------------------------- | 
 |  * Constructor/argument parsing: | 
 |  * <#multipath feature args> [<arg>]* | 
 |  * <#hw_handler args> [hw_handler [<arg>]*] | 
 |  * <#priority groups> | 
 |  * <initial priority group> | 
 |  *     [<selector> <#selector args> [<arg>]* | 
 |  *      <#paths> <#per-path selector args> | 
 |  *         [<path> [<arg>]* ]+ ]+ | 
 |  *---------------------------------------------------------------*/ | 
 | static int parse_path_selector(struct dm_arg_set *as, struct priority_group *pg, | 
 | 			       struct dm_target *ti) | 
 | { | 
 | 	int r; | 
 | 	struct path_selector_type *pst; | 
 | 	unsigned int ps_argc; | 
 |  | 
 | 	static const struct dm_arg _args[] = { | 
 | 		{0, 1024, "invalid number of path selector args"}, | 
 | 	}; | 
 |  | 
 | 	pst = dm_get_path_selector(dm_shift_arg(as)); | 
 | 	if (!pst) { | 
 | 		ti->error = "unknown path selector type"; | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	r = dm_read_arg_group(_args, as, &ps_argc, &ti->error); | 
 | 	if (r) { | 
 | 		dm_put_path_selector(pst); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	r = pst->create(&pg->ps, ps_argc, as->argv); | 
 | 	if (r) { | 
 | 		dm_put_path_selector(pst); | 
 | 		ti->error = "path selector constructor failed"; | 
 | 		return r; | 
 | 	} | 
 |  | 
 | 	pg->ps.type = pst; | 
 | 	dm_consume_args(as, ps_argc); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int setup_scsi_dh(struct block_device *bdev, struct multipath *m, | 
 | 			 const char **attached_handler_name, char **error) | 
 | { | 
 | 	struct request_queue *q = bdev_get_queue(bdev); | 
 | 	int r; | 
 |  | 
 | 	if (mpath_double_check_test_bit(MPATHF_RETAIN_ATTACHED_HW_HANDLER, m)) { | 
 | retain: | 
 | 		if (*attached_handler_name) { | 
 | 			/* | 
 | 			 * Clear any hw_handler_params associated with a | 
 | 			 * handler that isn't already attached. | 
 | 			 */ | 
 | 			if (m->hw_handler_name && strcmp(*attached_handler_name, m->hw_handler_name)) { | 
 | 				kfree(m->hw_handler_params); | 
 | 				m->hw_handler_params = NULL; | 
 | 			} | 
 |  | 
 | 			/* | 
 | 			 * Reset hw_handler_name to match the attached handler | 
 | 			 * | 
 | 			 * NB. This modifies the table line to show the actual | 
 | 			 * handler instead of the original table passed in. | 
 | 			 */ | 
 | 			kfree(m->hw_handler_name); | 
 | 			m->hw_handler_name = *attached_handler_name; | 
 | 			*attached_handler_name = NULL; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (m->hw_handler_name) { | 
 | 		r = scsi_dh_attach(q, m->hw_handler_name); | 
 | 		if (r == -EBUSY) { | 
 | 			DMINFO("retaining handler on device %pg", bdev); | 
 | 			goto retain; | 
 | 		} | 
 | 		if (r < 0) { | 
 | 			*error = "error attaching hardware handler"; | 
 | 			return r; | 
 | 		} | 
 |  | 
 | 		if (m->hw_handler_params) { | 
 | 			r = scsi_dh_set_params(q, m->hw_handler_params); | 
 | 			if (r < 0) { | 
 | 				*error = "unable to set hardware handler parameters"; | 
 | 				return r; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct pgpath *parse_path(struct dm_arg_set *as, struct path_selector *ps, | 
 | 				 struct dm_target *ti) | 
 | { | 
 | 	int r; | 
 | 	struct pgpath *p; | 
 | 	struct multipath *m = ti->private; | 
 | 	struct request_queue *q; | 
 | 	const char *attached_handler_name = NULL; | 
 |  | 
 | 	/* we need at least a path arg */ | 
 | 	if (as->argc < 1) { | 
 | 		ti->error = "no device given"; | 
 | 		return ERR_PTR(-EINVAL); | 
 | 	} | 
 |  | 
 | 	p = alloc_pgpath(); | 
 | 	if (!p) | 
 | 		return ERR_PTR(-ENOMEM); | 
 |  | 
 | 	r = dm_get_device(ti, dm_shift_arg(as), dm_table_get_mode(ti->table), | 
 | 			  &p->path.dev); | 
 | 	if (r) { | 
 | 		ti->error = "error getting device"; | 
 | 		goto bad; | 
 | 	} | 
 |  | 
 | 	q = bdev_get_queue(p->path.dev->bdev); | 
 | 	attached_handler_name = scsi_dh_attached_handler_name(q, GFP_KERNEL); | 
 | 	if (attached_handler_name || m->hw_handler_name) { | 
 | 		INIT_DELAYED_WORK(&p->activate_path, activate_path_work); | 
 | 		r = setup_scsi_dh(p->path.dev->bdev, m, &attached_handler_name, &ti->error); | 
 | 		kfree(attached_handler_name); | 
 | 		if (r) { | 
 | 			dm_put_device(ti, p->path.dev); | 
 | 			goto bad; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	r = ps->type->add_path(ps, &p->path, as->argc, as->argv, &ti->error); | 
 | 	if (r) { | 
 | 		dm_put_device(ti, p->path.dev); | 
 | 		goto bad; | 
 | 	} | 
 |  | 
 | 	return p; | 
 |  bad: | 
 | 	free_pgpath(p); | 
 | 	return ERR_PTR(r); | 
 | } | 
 |  | 
 | static struct priority_group *parse_priority_group(struct dm_arg_set *as, | 
 | 						   struct multipath *m) | 
 | { | 
 | 	static const struct dm_arg _args[] = { | 
 | 		{1, 1024, "invalid number of paths"}, | 
 | 		{0, 1024, "invalid number of selector args"} | 
 | 	}; | 
 |  | 
 | 	int r; | 
 | 	unsigned int i, nr_selector_args, nr_args; | 
 | 	struct priority_group *pg; | 
 | 	struct dm_target *ti = m->ti; | 
 |  | 
 | 	if (as->argc < 2) { | 
 | 		as->argc = 0; | 
 | 		ti->error = "not enough priority group arguments"; | 
 | 		return ERR_PTR(-EINVAL); | 
 | 	} | 
 |  | 
 | 	pg = alloc_priority_group(); | 
 | 	if (!pg) { | 
 | 		ti->error = "couldn't allocate priority group"; | 
 | 		return ERR_PTR(-ENOMEM); | 
 | 	} | 
 | 	pg->m = m; | 
 |  | 
 | 	r = parse_path_selector(as, pg, ti); | 
 | 	if (r) | 
 | 		goto bad; | 
 |  | 
 | 	/* | 
 | 	 * read the paths | 
 | 	 */ | 
 | 	r = dm_read_arg(_args, as, &pg->nr_pgpaths, &ti->error); | 
 | 	if (r) | 
 | 		goto bad; | 
 |  | 
 | 	r = dm_read_arg(_args + 1, as, &nr_selector_args, &ti->error); | 
 | 	if (r) | 
 | 		goto bad; | 
 |  | 
 | 	nr_args = 1 + nr_selector_args; | 
 | 	for (i = 0; i < pg->nr_pgpaths; i++) { | 
 | 		struct pgpath *pgpath; | 
 | 		struct dm_arg_set path_args; | 
 |  | 
 | 		if (as->argc < nr_args) { | 
 | 			ti->error = "not enough path parameters"; | 
 | 			r = -EINVAL; | 
 | 			goto bad; | 
 | 		} | 
 |  | 
 | 		path_args.argc = nr_args; | 
 | 		path_args.argv = as->argv; | 
 |  | 
 | 		pgpath = parse_path(&path_args, &pg->ps, ti); | 
 | 		if (IS_ERR(pgpath)) { | 
 | 			r = PTR_ERR(pgpath); | 
 | 			goto bad; | 
 | 		} | 
 |  | 
 | 		pgpath->pg = pg; | 
 | 		list_add_tail(&pgpath->list, &pg->pgpaths); | 
 | 		dm_consume_args(as, nr_args); | 
 | 	} | 
 |  | 
 | 	return pg; | 
 |  | 
 |  bad: | 
 | 	free_priority_group(pg, ti); | 
 | 	return ERR_PTR(r); | 
 | } | 
 |  | 
 | static int parse_hw_handler(struct dm_arg_set *as, struct multipath *m) | 
 | { | 
 | 	unsigned int hw_argc; | 
 | 	int ret; | 
 | 	struct dm_target *ti = m->ti; | 
 |  | 
 | 	static const struct dm_arg _args[] = { | 
 | 		{0, 1024, "invalid number of hardware handler args"}, | 
 | 	}; | 
 |  | 
 | 	if (dm_read_arg_group(_args, as, &hw_argc, &ti->error)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (!hw_argc) | 
 | 		return 0; | 
 |  | 
 | 	if (m->queue_mode == DM_TYPE_BIO_BASED) { | 
 | 		dm_consume_args(as, hw_argc); | 
 | 		DMERR("bio-based multipath doesn't allow hardware handler args"); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	m->hw_handler_name = kstrdup(dm_shift_arg(as), GFP_KERNEL); | 
 | 	if (!m->hw_handler_name) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (hw_argc > 1) { | 
 | 		char *p; | 
 | 		int i, j, len = 4; | 
 |  | 
 | 		for (i = 0; i <= hw_argc - 2; i++) | 
 | 			len += strlen(as->argv[i]) + 1; | 
 | 		p = m->hw_handler_params = kzalloc(len, GFP_KERNEL); | 
 | 		if (!p) { | 
 | 			ti->error = "memory allocation failed"; | 
 | 			ret = -ENOMEM; | 
 | 			goto fail; | 
 | 		} | 
 | 		j = sprintf(p, "%d", hw_argc - 1); | 
 | 		for (i = 0, p += j + 1; i <= hw_argc - 2; i++, p += j + 1) | 
 | 			j = sprintf(p, "%s", as->argv[i]); | 
 | 	} | 
 | 	dm_consume_args(as, hw_argc - 1); | 
 |  | 
 | 	return 0; | 
 | fail: | 
 | 	kfree(m->hw_handler_name); | 
 | 	m->hw_handler_name = NULL; | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int parse_features(struct dm_arg_set *as, struct multipath *m) | 
 | { | 
 | 	int r; | 
 | 	unsigned int argc; | 
 | 	struct dm_target *ti = m->ti; | 
 | 	const char *arg_name; | 
 |  | 
 | 	static const struct dm_arg _args[] = { | 
 | 		{0, 8, "invalid number of feature args"}, | 
 | 		{1, 50, "pg_init_retries must be between 1 and 50"}, | 
 | 		{0, 60000, "pg_init_delay_msecs must be between 0 and 60000"}, | 
 | 	}; | 
 |  | 
 | 	r = dm_read_arg_group(_args, as, &argc, &ti->error); | 
 | 	if (r) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (!argc) | 
 | 		return 0; | 
 |  | 
 | 	do { | 
 | 		arg_name = dm_shift_arg(as); | 
 | 		argc--; | 
 |  | 
 | 		if (!strcasecmp(arg_name, "queue_if_no_path")) { | 
 | 			r = queue_if_no_path(m, true, false, __func__); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		if (!strcasecmp(arg_name, "retain_attached_hw_handler")) { | 
 | 			set_bit(MPATHF_RETAIN_ATTACHED_HW_HANDLER, &m->flags); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		if (!strcasecmp(arg_name, "pg_init_retries") && | 
 | 		    (argc >= 1)) { | 
 | 			r = dm_read_arg(_args + 1, as, &m->pg_init_retries, &ti->error); | 
 | 			argc--; | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		if (!strcasecmp(arg_name, "pg_init_delay_msecs") && | 
 | 		    (argc >= 1)) { | 
 | 			r = dm_read_arg(_args + 2, as, &m->pg_init_delay_msecs, &ti->error); | 
 | 			argc--; | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		if (!strcasecmp(arg_name, "queue_mode") && | 
 | 		    (argc >= 1)) { | 
 | 			const char *queue_mode_name = dm_shift_arg(as); | 
 |  | 
 | 			if (!strcasecmp(queue_mode_name, "bio")) | 
 | 				m->queue_mode = DM_TYPE_BIO_BASED; | 
 | 			else if (!strcasecmp(queue_mode_name, "rq") || | 
 | 				 !strcasecmp(queue_mode_name, "mq")) | 
 | 				m->queue_mode = DM_TYPE_REQUEST_BASED; | 
 | 			else { | 
 | 				ti->error = "Unknown 'queue_mode' requested"; | 
 | 				r = -EINVAL; | 
 | 			} | 
 | 			argc--; | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		ti->error = "Unrecognised multipath feature request"; | 
 | 		r = -EINVAL; | 
 | 	} while (argc && !r); | 
 |  | 
 | 	return r; | 
 | } | 
 |  | 
 | static int multipath_ctr(struct dm_target *ti, unsigned int argc, char **argv) | 
 | { | 
 | 	/* target arguments */ | 
 | 	static const struct dm_arg _args[] = { | 
 | 		{0, 1024, "invalid number of priority groups"}, | 
 | 		{0, 1024, "invalid initial priority group number"}, | 
 | 	}; | 
 |  | 
 | 	int r; | 
 | 	struct multipath *m; | 
 | 	struct dm_arg_set as; | 
 | 	unsigned int pg_count = 0; | 
 | 	unsigned int next_pg_num; | 
 | 	unsigned long flags; | 
 |  | 
 | 	as.argc = argc; | 
 | 	as.argv = argv; | 
 |  | 
 | 	m = alloc_multipath(ti); | 
 | 	if (!m) { | 
 | 		ti->error = "can't allocate multipath"; | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	r = parse_features(&as, m); | 
 | 	if (r) | 
 | 		goto bad; | 
 |  | 
 | 	r = alloc_multipath_stage2(ti, m); | 
 | 	if (r) | 
 | 		goto bad; | 
 |  | 
 | 	r = parse_hw_handler(&as, m); | 
 | 	if (r) | 
 | 		goto bad; | 
 |  | 
 | 	r = dm_read_arg(_args, &as, &m->nr_priority_groups, &ti->error); | 
 | 	if (r) | 
 | 		goto bad; | 
 |  | 
 | 	r = dm_read_arg(_args + 1, &as, &next_pg_num, &ti->error); | 
 | 	if (r) | 
 | 		goto bad; | 
 |  | 
 | 	if ((!m->nr_priority_groups && next_pg_num) || | 
 | 	    (m->nr_priority_groups && !next_pg_num)) { | 
 | 		ti->error = "invalid initial priority group"; | 
 | 		r = -EINVAL; | 
 | 		goto bad; | 
 | 	} | 
 |  | 
 | 	/* parse the priority groups */ | 
 | 	while (as.argc) { | 
 | 		struct priority_group *pg; | 
 | 		unsigned int nr_valid_paths = atomic_read(&m->nr_valid_paths); | 
 |  | 
 | 		pg = parse_priority_group(&as, m); | 
 | 		if (IS_ERR(pg)) { | 
 | 			r = PTR_ERR(pg); | 
 | 			goto bad; | 
 | 		} | 
 |  | 
 | 		nr_valid_paths += pg->nr_pgpaths; | 
 | 		atomic_set(&m->nr_valid_paths, nr_valid_paths); | 
 |  | 
 | 		list_add_tail(&pg->list, &m->priority_groups); | 
 | 		pg_count++; | 
 | 		pg->pg_num = pg_count; | 
 | 		if (!--next_pg_num) | 
 | 			m->next_pg = pg; | 
 | 	} | 
 |  | 
 | 	if (pg_count != m->nr_priority_groups) { | 
 | 		ti->error = "priority group count mismatch"; | 
 | 		r = -EINVAL; | 
 | 		goto bad; | 
 | 	} | 
 |  | 
 | 	spin_lock_irqsave(&m->lock, flags); | 
 | 	enable_nopath_timeout(m); | 
 | 	spin_unlock_irqrestore(&m->lock, flags); | 
 |  | 
 | 	ti->num_flush_bios = 1; | 
 | 	ti->num_discard_bios = 1; | 
 | 	ti->num_write_zeroes_bios = 1; | 
 | 	if (m->queue_mode == DM_TYPE_BIO_BASED) | 
 | 		ti->per_io_data_size = multipath_per_bio_data_size(); | 
 | 	else | 
 | 		ti->per_io_data_size = sizeof(struct dm_mpath_io); | 
 |  | 
 | 	return 0; | 
 |  | 
 |  bad: | 
 | 	free_multipath(m); | 
 | 	return r; | 
 | } | 
 |  | 
 | static void multipath_wait_for_pg_init_completion(struct multipath *m) | 
 | { | 
 | 	DEFINE_WAIT(wait); | 
 |  | 
 | 	while (1) { | 
 | 		prepare_to_wait(&m->pg_init_wait, &wait, TASK_UNINTERRUPTIBLE); | 
 |  | 
 | 		if (!atomic_read(&m->pg_init_in_progress)) | 
 | 			break; | 
 |  | 
 | 		io_schedule(); | 
 | 	} | 
 | 	finish_wait(&m->pg_init_wait, &wait); | 
 | } | 
 |  | 
 | static void flush_multipath_work(struct multipath *m) | 
 | { | 
 | 	if (m->hw_handler_name) { | 
 | 		unsigned long flags; | 
 |  | 
 | 		if (!atomic_read(&m->pg_init_in_progress)) | 
 | 			goto skip; | 
 |  | 
 | 		spin_lock_irqsave(&m->lock, flags); | 
 | 		if (atomic_read(&m->pg_init_in_progress) && | 
 | 		    !test_and_set_bit(MPATHF_PG_INIT_DISABLED, &m->flags)) { | 
 | 			spin_unlock_irqrestore(&m->lock, flags); | 
 |  | 
 | 			flush_workqueue(kmpath_handlerd); | 
 | 			multipath_wait_for_pg_init_completion(m); | 
 |  | 
 | 			spin_lock_irqsave(&m->lock, flags); | 
 | 			clear_bit(MPATHF_PG_INIT_DISABLED, &m->flags); | 
 | 		} | 
 | 		spin_unlock_irqrestore(&m->lock, flags); | 
 | 	} | 
 | skip: | 
 | 	if (m->queue_mode == DM_TYPE_BIO_BASED) | 
 | 		flush_work(&m->process_queued_bios); | 
 | 	flush_work(&m->trigger_event); | 
 | } | 
 |  | 
 | static void multipath_dtr(struct dm_target *ti) | 
 | { | 
 | 	struct multipath *m = ti->private; | 
 |  | 
 | 	disable_nopath_timeout(m); | 
 | 	flush_multipath_work(m); | 
 | 	free_multipath(m); | 
 | } | 
 |  | 
 | /* | 
 |  * Take a path out of use. | 
 |  */ | 
 | static int fail_path(struct pgpath *pgpath) | 
 | { | 
 | 	unsigned long flags; | 
 | 	struct multipath *m = pgpath->pg->m; | 
 |  | 
 | 	spin_lock_irqsave(&m->lock, flags); | 
 |  | 
 | 	if (!pgpath->is_active) | 
 | 		goto out; | 
 |  | 
 | 	DMWARN("%s: Failing path %s.", | 
 | 	       dm_table_device_name(m->ti->table), | 
 | 	       pgpath->path.dev->name); | 
 |  | 
 | 	pgpath->pg->ps.type->fail_path(&pgpath->pg->ps, &pgpath->path); | 
 | 	pgpath->is_active = false; | 
 | 	pgpath->fail_count++; | 
 |  | 
 | 	atomic_dec(&m->nr_valid_paths); | 
 |  | 
 | 	if (pgpath == m->current_pgpath) | 
 | 		m->current_pgpath = NULL; | 
 |  | 
 | 	dm_path_uevent(DM_UEVENT_PATH_FAILED, m->ti, | 
 | 		       pgpath->path.dev->name, atomic_read(&m->nr_valid_paths)); | 
 |  | 
 | 	schedule_work(&m->trigger_event); | 
 |  | 
 | 	enable_nopath_timeout(m); | 
 |  | 
 | out: | 
 | 	spin_unlock_irqrestore(&m->lock, flags); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Reinstate a previously-failed path | 
 |  */ | 
 | static int reinstate_path(struct pgpath *pgpath) | 
 | { | 
 | 	int r = 0, run_queue = 0; | 
 | 	unsigned long flags; | 
 | 	struct multipath *m = pgpath->pg->m; | 
 | 	unsigned int nr_valid_paths; | 
 |  | 
 | 	spin_lock_irqsave(&m->lock, flags); | 
 |  | 
 | 	if (pgpath->is_active) | 
 | 		goto out; | 
 |  | 
 | 	DMWARN("%s: Reinstating path %s.", | 
 | 	       dm_table_device_name(m->ti->table), | 
 | 	       pgpath->path.dev->name); | 
 |  | 
 | 	r = pgpath->pg->ps.type->reinstate_path(&pgpath->pg->ps, &pgpath->path); | 
 | 	if (r) | 
 | 		goto out; | 
 |  | 
 | 	pgpath->is_active = true; | 
 |  | 
 | 	nr_valid_paths = atomic_inc_return(&m->nr_valid_paths); | 
 | 	if (nr_valid_paths == 1) { | 
 | 		m->current_pgpath = NULL; | 
 | 		run_queue = 1; | 
 | 	} else if (m->hw_handler_name && (m->current_pg == pgpath->pg)) { | 
 | 		if (queue_work(kmpath_handlerd, &pgpath->activate_path.work)) | 
 | 			atomic_inc(&m->pg_init_in_progress); | 
 | 	} | 
 |  | 
 | 	dm_path_uevent(DM_UEVENT_PATH_REINSTATED, m->ti, | 
 | 		       pgpath->path.dev->name, nr_valid_paths); | 
 |  | 
 | 	schedule_work(&m->trigger_event); | 
 |  | 
 | out: | 
 | 	spin_unlock_irqrestore(&m->lock, flags); | 
 | 	if (run_queue) { | 
 | 		dm_table_run_md_queue_async(m->ti->table); | 
 | 		process_queued_io_list(m); | 
 | 	} | 
 |  | 
 | 	if (pgpath->is_active) | 
 | 		disable_nopath_timeout(m); | 
 |  | 
 | 	return r; | 
 | } | 
 |  | 
 | /* | 
 |  * Fail or reinstate all paths that match the provided struct dm_dev. | 
 |  */ | 
 | static int action_dev(struct multipath *m, struct dm_dev *dev, | 
 | 		      action_fn action) | 
 | { | 
 | 	int r = -EINVAL; | 
 | 	struct pgpath *pgpath; | 
 | 	struct priority_group *pg; | 
 |  | 
 | 	list_for_each_entry(pg, &m->priority_groups, list) { | 
 | 		list_for_each_entry(pgpath, &pg->pgpaths, list) { | 
 | 			if (pgpath->path.dev == dev) | 
 | 				r = action(pgpath); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return r; | 
 | } | 
 |  | 
 | /* | 
 |  * Temporarily try to avoid having to use the specified PG | 
 |  */ | 
 | static void bypass_pg(struct multipath *m, struct priority_group *pg, | 
 | 		      bool bypassed) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&m->lock, flags); | 
 |  | 
 | 	pg->bypassed = bypassed; | 
 | 	m->current_pgpath = NULL; | 
 | 	m->current_pg = NULL; | 
 |  | 
 | 	spin_unlock_irqrestore(&m->lock, flags); | 
 |  | 
 | 	schedule_work(&m->trigger_event); | 
 | } | 
 |  | 
 | /* | 
 |  * Switch to using the specified PG from the next I/O that gets mapped | 
 |  */ | 
 | static int switch_pg_num(struct multipath *m, const char *pgstr) | 
 | { | 
 | 	struct priority_group *pg; | 
 | 	unsigned int pgnum; | 
 | 	unsigned long flags; | 
 | 	char dummy; | 
 |  | 
 | 	if (!pgstr || (sscanf(pgstr, "%u%c", &pgnum, &dummy) != 1) || !pgnum || | 
 | 	    !m->nr_priority_groups || (pgnum > m->nr_priority_groups)) { | 
 | 		DMWARN("invalid PG number supplied to switch_pg_num"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	spin_lock_irqsave(&m->lock, flags); | 
 | 	list_for_each_entry(pg, &m->priority_groups, list) { | 
 | 		pg->bypassed = false; | 
 | 		if (--pgnum) | 
 | 			continue; | 
 |  | 
 | 		m->current_pgpath = NULL; | 
 | 		m->current_pg = NULL; | 
 | 		m->next_pg = pg; | 
 | 	} | 
 | 	spin_unlock_irqrestore(&m->lock, flags); | 
 |  | 
 | 	schedule_work(&m->trigger_event); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Set/clear bypassed status of a PG. | 
 |  * PGs are numbered upwards from 1 in the order they were declared. | 
 |  */ | 
 | static int bypass_pg_num(struct multipath *m, const char *pgstr, bool bypassed) | 
 | { | 
 | 	struct priority_group *pg; | 
 | 	unsigned int pgnum; | 
 | 	char dummy; | 
 |  | 
 | 	if (!pgstr || (sscanf(pgstr, "%u%c", &pgnum, &dummy) != 1) || !pgnum || | 
 | 	    !m->nr_priority_groups || (pgnum > m->nr_priority_groups)) { | 
 | 		DMWARN("invalid PG number supplied to bypass_pg"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	list_for_each_entry(pg, &m->priority_groups, list) { | 
 | 		if (!--pgnum) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	bypass_pg(m, pg, bypassed); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Should we retry pg_init immediately? | 
 |  */ | 
 | static bool pg_init_limit_reached(struct multipath *m, struct pgpath *pgpath) | 
 | { | 
 | 	unsigned long flags; | 
 | 	bool limit_reached = false; | 
 |  | 
 | 	spin_lock_irqsave(&m->lock, flags); | 
 |  | 
 | 	if (atomic_read(&m->pg_init_count) <= m->pg_init_retries && | 
 | 	    !test_bit(MPATHF_PG_INIT_DISABLED, &m->flags)) | 
 | 		set_bit(MPATHF_PG_INIT_REQUIRED, &m->flags); | 
 | 	else | 
 | 		limit_reached = true; | 
 |  | 
 | 	spin_unlock_irqrestore(&m->lock, flags); | 
 |  | 
 | 	return limit_reached; | 
 | } | 
 |  | 
 | static void pg_init_done(void *data, int errors) | 
 | { | 
 | 	struct pgpath *pgpath = data; | 
 | 	struct priority_group *pg = pgpath->pg; | 
 | 	struct multipath *m = pg->m; | 
 | 	unsigned long flags; | 
 | 	bool delay_retry = false; | 
 |  | 
 | 	/* device or driver problems */ | 
 | 	switch (errors) { | 
 | 	case SCSI_DH_OK: | 
 | 		break; | 
 | 	case SCSI_DH_NOSYS: | 
 | 		if (!m->hw_handler_name) { | 
 | 			errors = 0; | 
 | 			break; | 
 | 		} | 
 | 		DMERR("Could not failover the device: Handler scsi_dh_%s " | 
 | 		      "Error %d.", m->hw_handler_name, errors); | 
 | 		/* | 
 | 		 * Fail path for now, so we do not ping pong | 
 | 		 */ | 
 | 		fail_path(pgpath); | 
 | 		break; | 
 | 	case SCSI_DH_DEV_TEMP_BUSY: | 
 | 		/* | 
 | 		 * Probably doing something like FW upgrade on the | 
 | 		 * controller so try the other pg. | 
 | 		 */ | 
 | 		bypass_pg(m, pg, true); | 
 | 		break; | 
 | 	case SCSI_DH_RETRY: | 
 | 		/* Wait before retrying. */ | 
 | 		delay_retry = true; | 
 | 		fallthrough; | 
 | 	case SCSI_DH_IMM_RETRY: | 
 | 	case SCSI_DH_RES_TEMP_UNAVAIL: | 
 | 		if (pg_init_limit_reached(m, pgpath)) | 
 | 			fail_path(pgpath); | 
 | 		errors = 0; | 
 | 		break; | 
 | 	case SCSI_DH_DEV_OFFLINED: | 
 | 	default: | 
 | 		/* | 
 | 		 * We probably do not want to fail the path for a device | 
 | 		 * error, but this is what the old dm did. In future | 
 | 		 * patches we can do more advanced handling. | 
 | 		 */ | 
 | 		fail_path(pgpath); | 
 | 	} | 
 |  | 
 | 	spin_lock_irqsave(&m->lock, flags); | 
 | 	if (errors) { | 
 | 		if (pgpath == m->current_pgpath) { | 
 | 			DMERR("Could not failover device. Error %d.", errors); | 
 | 			m->current_pgpath = NULL; | 
 | 			m->current_pg = NULL; | 
 | 		} | 
 | 	} else if (!test_bit(MPATHF_PG_INIT_REQUIRED, &m->flags)) | 
 | 		pg->bypassed = false; | 
 |  | 
 | 	if (atomic_dec_return(&m->pg_init_in_progress) > 0) | 
 | 		/* Activations of other paths are still on going */ | 
 | 		goto out; | 
 |  | 
 | 	if (test_bit(MPATHF_PG_INIT_REQUIRED, &m->flags)) { | 
 | 		if (delay_retry) | 
 | 			set_bit(MPATHF_PG_INIT_DELAY_RETRY, &m->flags); | 
 | 		else | 
 | 			clear_bit(MPATHF_PG_INIT_DELAY_RETRY, &m->flags); | 
 |  | 
 | 		if (__pg_init_all_paths(m)) | 
 | 			goto out; | 
 | 	} | 
 | 	clear_bit(MPATHF_QUEUE_IO, &m->flags); | 
 |  | 
 | 	process_queued_io_list(m); | 
 |  | 
 | 	/* | 
 | 	 * Wake up any thread waiting to suspend. | 
 | 	 */ | 
 | 	wake_up(&m->pg_init_wait); | 
 |  | 
 | out: | 
 | 	spin_unlock_irqrestore(&m->lock, flags); | 
 | } | 
 |  | 
 | static void activate_or_offline_path(struct pgpath *pgpath) | 
 | { | 
 | 	struct request_queue *q = bdev_get_queue(pgpath->path.dev->bdev); | 
 |  | 
 | 	if (pgpath->is_active && !blk_queue_dying(q)) | 
 | 		scsi_dh_activate(q, pg_init_done, pgpath); | 
 | 	else | 
 | 		pg_init_done(pgpath, SCSI_DH_DEV_OFFLINED); | 
 | } | 
 |  | 
 | static void activate_path_work(struct work_struct *work) | 
 | { | 
 | 	struct pgpath *pgpath = | 
 | 		container_of(work, struct pgpath, activate_path.work); | 
 |  | 
 | 	activate_or_offline_path(pgpath); | 
 | } | 
 |  | 
 | static int multipath_end_io(struct dm_target *ti, struct request *clone, | 
 | 			    blk_status_t error, union map_info *map_context) | 
 | { | 
 | 	struct dm_mpath_io *mpio = get_mpio(map_context); | 
 | 	struct pgpath *pgpath = mpio->pgpath; | 
 | 	int r = DM_ENDIO_DONE; | 
 |  | 
 | 	/* | 
 | 	 * We don't queue any clone request inside the multipath target | 
 | 	 * during end I/O handling, since those clone requests don't have | 
 | 	 * bio clones.  If we queue them inside the multipath target, | 
 | 	 * we need to make bio clones, that requires memory allocation. | 
 | 	 * (See drivers/md/dm-rq.c:end_clone_bio() about why the clone requests | 
 | 	 *  don't have bio clones.) | 
 | 	 * Instead of queueing the clone request here, we queue the original | 
 | 	 * request into dm core, which will remake a clone request and | 
 | 	 * clone bios for it and resubmit it later. | 
 | 	 */ | 
 | 	if (error && blk_path_error(error)) { | 
 | 		struct multipath *m = ti->private; | 
 |  | 
 | 		if (error == BLK_STS_RESOURCE) | 
 | 			r = DM_ENDIO_DELAY_REQUEUE; | 
 | 		else | 
 | 			r = DM_ENDIO_REQUEUE; | 
 |  | 
 | 		if (pgpath) | 
 | 			fail_path(pgpath); | 
 |  | 
 | 		if (!atomic_read(&m->nr_valid_paths) && | 
 | 		    !must_push_back_rq(m)) { | 
 | 			if (error == BLK_STS_IOERR) | 
 | 				dm_report_EIO(m); | 
 | 			/* complete with the original error */ | 
 | 			r = DM_ENDIO_DONE; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (pgpath) { | 
 | 		struct path_selector *ps = &pgpath->pg->ps; | 
 |  | 
 | 		if (ps->type->end_io) | 
 | 			ps->type->end_io(ps, &pgpath->path, mpio->nr_bytes, | 
 | 					 clone->io_start_time_ns); | 
 | 	} | 
 |  | 
 | 	return r; | 
 | } | 
 |  | 
 | static int multipath_end_io_bio(struct dm_target *ti, struct bio *clone, | 
 | 				blk_status_t *error) | 
 | { | 
 | 	struct multipath *m = ti->private; | 
 | 	struct dm_mpath_io *mpio = get_mpio_from_bio(clone); | 
 | 	struct pgpath *pgpath = mpio->pgpath; | 
 | 	unsigned long flags; | 
 | 	int r = DM_ENDIO_DONE; | 
 |  | 
 | 	if (!*error || !blk_path_error(*error)) | 
 | 		goto done; | 
 |  | 
 | 	if (pgpath) | 
 | 		fail_path(pgpath); | 
 |  | 
 | 	if (!atomic_read(&m->nr_valid_paths)) { | 
 | 		spin_lock_irqsave(&m->lock, flags); | 
 | 		if (!test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)) { | 
 | 			if (__must_push_back(m)) { | 
 | 				r = DM_ENDIO_REQUEUE; | 
 | 			} else { | 
 | 				dm_report_EIO(m); | 
 | 				*error = BLK_STS_IOERR; | 
 | 			} | 
 | 			spin_unlock_irqrestore(&m->lock, flags); | 
 | 			goto done; | 
 | 		} | 
 | 		spin_unlock_irqrestore(&m->lock, flags); | 
 | 	} | 
 |  | 
 | 	multipath_queue_bio(m, clone); | 
 | 	r = DM_ENDIO_INCOMPLETE; | 
 | done: | 
 | 	if (pgpath) { | 
 | 		struct path_selector *ps = &pgpath->pg->ps; | 
 |  | 
 | 		if (ps->type->end_io) | 
 | 			ps->type->end_io(ps, &pgpath->path, mpio->nr_bytes, | 
 | 					 (mpio->start_time_ns ?: | 
 | 					  dm_start_time_ns_from_clone(clone))); | 
 | 	} | 
 |  | 
 | 	return r; | 
 | } | 
 |  | 
 | /* | 
 |  * Suspend with flush can't complete until all the I/O is processed | 
 |  * so if the last path fails we must error any remaining I/O. | 
 |  * - Note that if the freeze_bdev fails while suspending, the | 
 |  *   queue_if_no_path state is lost - userspace should reset it. | 
 |  * Otherwise, during noflush suspend, queue_if_no_path will not change. | 
 |  */ | 
 | static void multipath_presuspend(struct dm_target *ti) | 
 | { | 
 | 	struct multipath *m = ti->private; | 
 |  | 
 | 	/* FIXME: bio-based shouldn't need to always disable queue_if_no_path */ | 
 | 	if (m->queue_mode == DM_TYPE_BIO_BASED || !dm_noflush_suspending(m->ti)) | 
 | 		queue_if_no_path(m, false, true, __func__); | 
 | } | 
 |  | 
 | static void multipath_postsuspend(struct dm_target *ti) | 
 | { | 
 | 	struct multipath *m = ti->private; | 
 |  | 
 | 	mutex_lock(&m->work_mutex); | 
 | 	flush_multipath_work(m); | 
 | 	mutex_unlock(&m->work_mutex); | 
 | } | 
 |  | 
 | /* | 
 |  * Restore the queue_if_no_path setting. | 
 |  */ | 
 | static void multipath_resume(struct dm_target *ti) | 
 | { | 
 | 	struct multipath *m = ti->private; | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&m->lock, flags); | 
 | 	if (test_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags)) { | 
 | 		set_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags); | 
 | 		clear_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags); | 
 | 	} | 
 |  | 
 | 	DMDEBUG("%s: %s finished; QIFNP = %d; SQIFNP = %d", | 
 | 		dm_table_device_name(m->ti->table), __func__, | 
 | 		test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags), | 
 | 		test_bit(MPATHF_SAVED_QUEUE_IF_NO_PATH, &m->flags)); | 
 |  | 
 | 	spin_unlock_irqrestore(&m->lock, flags); | 
 | } | 
 |  | 
 | /* | 
 |  * Info output has the following format: | 
 |  * num_multipath_feature_args [multipath_feature_args]* | 
 |  * num_handler_status_args [handler_status_args]* | 
 |  * num_groups init_group_number | 
 |  *            [A|D|E num_ps_status_args [ps_status_args]* | 
 |  *             num_paths num_selector_args | 
 |  *             [path_dev A|F fail_count [selector_args]* ]+ ]+ | 
 |  * | 
 |  * Table output has the following format (identical to the constructor string): | 
 |  * num_feature_args [features_args]* | 
 |  * num_handler_args hw_handler [hw_handler_args]* | 
 |  * num_groups init_group_number | 
 |  *     [priority selector-name num_ps_args [ps_args]* | 
 |  *      num_paths num_selector_args [path_dev [selector_args]* ]+ ]+ | 
 |  */ | 
 | static void multipath_status(struct dm_target *ti, status_type_t type, | 
 | 			     unsigned int status_flags, char *result, unsigned int maxlen) | 
 | { | 
 | 	int sz = 0, pg_counter, pgpath_counter; | 
 | 	unsigned long flags; | 
 | 	struct multipath *m = ti->private; | 
 | 	struct priority_group *pg; | 
 | 	struct pgpath *p; | 
 | 	unsigned int pg_num; | 
 | 	char state; | 
 |  | 
 | 	spin_lock_irqsave(&m->lock, flags); | 
 |  | 
 | 	/* Features */ | 
 | 	if (type == STATUSTYPE_INFO) | 
 | 		DMEMIT("2 %u %u ", test_bit(MPATHF_QUEUE_IO, &m->flags), | 
 | 		       atomic_read(&m->pg_init_count)); | 
 | 	else { | 
 | 		DMEMIT("%u ", test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags) + | 
 | 			      (m->pg_init_retries > 0) * 2 + | 
 | 			      (m->pg_init_delay_msecs != DM_PG_INIT_DELAY_DEFAULT) * 2 + | 
 | 			      test_bit(MPATHF_RETAIN_ATTACHED_HW_HANDLER, &m->flags) + | 
 | 			      (m->queue_mode != DM_TYPE_REQUEST_BASED) * 2); | 
 |  | 
 | 		if (test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)) | 
 | 			DMEMIT("queue_if_no_path "); | 
 | 		if (m->pg_init_retries) | 
 | 			DMEMIT("pg_init_retries %u ", m->pg_init_retries); | 
 | 		if (m->pg_init_delay_msecs != DM_PG_INIT_DELAY_DEFAULT) | 
 | 			DMEMIT("pg_init_delay_msecs %u ", m->pg_init_delay_msecs); | 
 | 		if (test_bit(MPATHF_RETAIN_ATTACHED_HW_HANDLER, &m->flags)) | 
 | 			DMEMIT("retain_attached_hw_handler "); | 
 | 		if (m->queue_mode != DM_TYPE_REQUEST_BASED) { | 
 | 			switch(m->queue_mode) { | 
 | 			case DM_TYPE_BIO_BASED: | 
 | 				DMEMIT("queue_mode bio "); | 
 | 				break; | 
 | 			default: | 
 | 				WARN_ON_ONCE(true); | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (!m->hw_handler_name || type == STATUSTYPE_INFO) | 
 | 		DMEMIT("0 "); | 
 | 	else | 
 | 		DMEMIT("1 %s ", m->hw_handler_name); | 
 |  | 
 | 	DMEMIT("%u ", m->nr_priority_groups); | 
 |  | 
 | 	if (m->next_pg) | 
 | 		pg_num = m->next_pg->pg_num; | 
 | 	else if (m->current_pg) | 
 | 		pg_num = m->current_pg->pg_num; | 
 | 	else | 
 | 		pg_num = (m->nr_priority_groups ? 1 : 0); | 
 |  | 
 | 	DMEMIT("%u ", pg_num); | 
 |  | 
 | 	switch (type) { | 
 | 	case STATUSTYPE_INFO: | 
 | 		list_for_each_entry(pg, &m->priority_groups, list) { | 
 | 			if (pg->bypassed) | 
 | 				state = 'D';	/* Disabled */ | 
 | 			else if (pg == m->current_pg) | 
 | 				state = 'A';	/* Currently Active */ | 
 | 			else | 
 | 				state = 'E';	/* Enabled */ | 
 |  | 
 | 			DMEMIT("%c ", state); | 
 |  | 
 | 			if (pg->ps.type->status) | 
 | 				sz += pg->ps.type->status(&pg->ps, NULL, type, | 
 | 							  result + sz, | 
 | 							  maxlen - sz); | 
 | 			else | 
 | 				DMEMIT("0 "); | 
 |  | 
 | 			DMEMIT("%u %u ", pg->nr_pgpaths, | 
 | 			       pg->ps.type->info_args); | 
 |  | 
 | 			list_for_each_entry(p, &pg->pgpaths, list) { | 
 | 				DMEMIT("%s %s %u ", p->path.dev->name, | 
 | 				       p->is_active ? "A" : "F", | 
 | 				       p->fail_count); | 
 | 				if (pg->ps.type->status) | 
 | 					sz += pg->ps.type->status(&pg->ps, | 
 | 					      &p->path, type, result + sz, | 
 | 					      maxlen - sz); | 
 | 			} | 
 | 		} | 
 | 		break; | 
 |  | 
 | 	case STATUSTYPE_TABLE: | 
 | 		list_for_each_entry(pg, &m->priority_groups, list) { | 
 | 			DMEMIT("%s ", pg->ps.type->name); | 
 |  | 
 | 			if (pg->ps.type->status) | 
 | 				sz += pg->ps.type->status(&pg->ps, NULL, type, | 
 | 							  result + sz, | 
 | 							  maxlen - sz); | 
 | 			else | 
 | 				DMEMIT("0 "); | 
 |  | 
 | 			DMEMIT("%u %u ", pg->nr_pgpaths, | 
 | 			       pg->ps.type->table_args); | 
 |  | 
 | 			list_for_each_entry(p, &pg->pgpaths, list) { | 
 | 				DMEMIT("%s ", p->path.dev->name); | 
 | 				if (pg->ps.type->status) | 
 | 					sz += pg->ps.type->status(&pg->ps, | 
 | 					      &p->path, type, result + sz, | 
 | 					      maxlen - sz); | 
 | 			} | 
 | 		} | 
 | 		break; | 
 |  | 
 | 	case STATUSTYPE_IMA: | 
 | 		sz = 0; /*reset the result pointer*/ | 
 |  | 
 | 		DMEMIT_TARGET_NAME_VERSION(ti->type); | 
 | 		DMEMIT(",nr_priority_groups=%u", m->nr_priority_groups); | 
 |  | 
 | 		pg_counter = 0; | 
 | 		list_for_each_entry(pg, &m->priority_groups, list) { | 
 | 			if (pg->bypassed) | 
 | 				state = 'D';	/* Disabled */ | 
 | 			else if (pg == m->current_pg) | 
 | 				state = 'A';	/* Currently Active */ | 
 | 			else | 
 | 				state = 'E';	/* Enabled */ | 
 | 			DMEMIT(",pg_state_%d=%c", pg_counter, state); | 
 | 			DMEMIT(",nr_pgpaths_%d=%u", pg_counter, pg->nr_pgpaths); | 
 | 			DMEMIT(",path_selector_name_%d=%s", pg_counter, pg->ps.type->name); | 
 |  | 
 | 			pgpath_counter = 0; | 
 | 			list_for_each_entry(p, &pg->pgpaths, list) { | 
 | 				DMEMIT(",path_name_%d_%d=%s,is_active_%d_%d=%c,fail_count_%d_%d=%u", | 
 | 				       pg_counter, pgpath_counter, p->path.dev->name, | 
 | 				       pg_counter, pgpath_counter, p->is_active ? 'A' : 'F', | 
 | 				       pg_counter, pgpath_counter, p->fail_count); | 
 | 				if (pg->ps.type->status) { | 
 | 					DMEMIT(",path_selector_status_%d_%d=", | 
 | 					       pg_counter, pgpath_counter); | 
 | 					sz += pg->ps.type->status(&pg->ps, &p->path, | 
 | 								  type, result + sz, | 
 | 								  maxlen - sz); | 
 | 				} | 
 | 				pgpath_counter++; | 
 | 			} | 
 | 			pg_counter++; | 
 | 		} | 
 | 		DMEMIT(";"); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	spin_unlock_irqrestore(&m->lock, flags); | 
 | } | 
 |  | 
 | static int multipath_message(struct dm_target *ti, unsigned int argc, char **argv, | 
 | 			     char *result, unsigned int maxlen) | 
 | { | 
 | 	int r = -EINVAL; | 
 | 	struct dm_dev *dev; | 
 | 	struct multipath *m = ti->private; | 
 | 	action_fn action; | 
 | 	unsigned long flags; | 
 |  | 
 | 	mutex_lock(&m->work_mutex); | 
 |  | 
 | 	if (dm_suspended(ti)) { | 
 | 		r = -EBUSY; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if (argc == 1) { | 
 | 		if (!strcasecmp(argv[0], "queue_if_no_path")) { | 
 | 			r = queue_if_no_path(m, true, false, __func__); | 
 | 			spin_lock_irqsave(&m->lock, flags); | 
 | 			enable_nopath_timeout(m); | 
 | 			spin_unlock_irqrestore(&m->lock, flags); | 
 | 			goto out; | 
 | 		} else if (!strcasecmp(argv[0], "fail_if_no_path")) { | 
 | 			r = queue_if_no_path(m, false, false, __func__); | 
 | 			disable_nopath_timeout(m); | 
 | 			goto out; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (argc != 2) { | 
 | 		DMWARN("Invalid multipath message arguments. Expected 2 arguments, got %d.", argc); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if (!strcasecmp(argv[0], "disable_group")) { | 
 | 		r = bypass_pg_num(m, argv[1], true); | 
 | 		goto out; | 
 | 	} else if (!strcasecmp(argv[0], "enable_group")) { | 
 | 		r = bypass_pg_num(m, argv[1], false); | 
 | 		goto out; | 
 | 	} else if (!strcasecmp(argv[0], "switch_group")) { | 
 | 		r = switch_pg_num(m, argv[1]); | 
 | 		goto out; | 
 | 	} else if (!strcasecmp(argv[0], "reinstate_path")) | 
 | 		action = reinstate_path; | 
 | 	else if (!strcasecmp(argv[0], "fail_path")) | 
 | 		action = fail_path; | 
 | 	else { | 
 | 		DMWARN("Unrecognised multipath message received: %s", argv[0]); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	r = dm_get_device(ti, argv[1], dm_table_get_mode(ti->table), &dev); | 
 | 	if (r) { | 
 | 		DMWARN("message: error getting device %s", | 
 | 		       argv[1]); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	r = action_dev(m, dev, action); | 
 |  | 
 | 	dm_put_device(ti, dev); | 
 |  | 
 | out: | 
 | 	mutex_unlock(&m->work_mutex); | 
 | 	return r; | 
 | } | 
 |  | 
 | static int multipath_prepare_ioctl(struct dm_target *ti, | 
 | 				   struct block_device **bdev) | 
 | { | 
 | 	struct multipath *m = ti->private; | 
 | 	struct pgpath *pgpath; | 
 | 	unsigned long flags; | 
 | 	int r; | 
 |  | 
 | 	pgpath = READ_ONCE(m->current_pgpath); | 
 | 	if (!pgpath || !mpath_double_check_test_bit(MPATHF_QUEUE_IO, m)) | 
 | 		pgpath = choose_pgpath(m, 0); | 
 |  | 
 | 	if (pgpath) { | 
 | 		if (!mpath_double_check_test_bit(MPATHF_QUEUE_IO, m)) { | 
 | 			*bdev = pgpath->path.dev->bdev; | 
 | 			r = 0; | 
 | 		} else { | 
 | 			/* pg_init has not started or completed */ | 
 | 			r = -ENOTCONN; | 
 | 		} | 
 | 	} else { | 
 | 		/* No path is available */ | 
 | 		r = -EIO; | 
 | 		spin_lock_irqsave(&m->lock, flags); | 
 | 		if (test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)) | 
 | 			r = -ENOTCONN; | 
 | 		spin_unlock_irqrestore(&m->lock, flags); | 
 | 	} | 
 |  | 
 | 	if (r == -ENOTCONN) { | 
 | 		if (!READ_ONCE(m->current_pg)) { | 
 | 			/* Path status changed, redo selection */ | 
 | 			(void) choose_pgpath(m, 0); | 
 | 		} | 
 | 		spin_lock_irqsave(&m->lock, flags); | 
 | 		if (test_bit(MPATHF_PG_INIT_REQUIRED, &m->flags)) | 
 | 			(void) __pg_init_all_paths(m); | 
 | 		spin_unlock_irqrestore(&m->lock, flags); | 
 | 		dm_table_run_md_queue_async(m->ti->table); | 
 | 		process_queued_io_list(m); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Only pass ioctls through if the device sizes match exactly. | 
 | 	 */ | 
 | 	if (!r && ti->len != bdev_nr_sectors((*bdev))) | 
 | 		return 1; | 
 | 	return r; | 
 | } | 
 |  | 
 | static int multipath_iterate_devices(struct dm_target *ti, | 
 | 				     iterate_devices_callout_fn fn, void *data) | 
 | { | 
 | 	struct multipath *m = ti->private; | 
 | 	struct priority_group *pg; | 
 | 	struct pgpath *p; | 
 | 	int ret = 0; | 
 |  | 
 | 	list_for_each_entry(pg, &m->priority_groups, list) { | 
 | 		list_for_each_entry(p, &pg->pgpaths, list) { | 
 | 			ret = fn(ti, p->path.dev, ti->begin, ti->len, data); | 
 | 			if (ret) | 
 | 				goto out; | 
 | 		} | 
 | 	} | 
 |  | 
 | out: | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int pgpath_busy(struct pgpath *pgpath) | 
 | { | 
 | 	struct request_queue *q = bdev_get_queue(pgpath->path.dev->bdev); | 
 |  | 
 | 	return blk_lld_busy(q); | 
 | } | 
 |  | 
 | /* | 
 |  * We return "busy", only when we can map I/Os but underlying devices | 
 |  * are busy (so even if we map I/Os now, the I/Os will wait on | 
 |  * the underlying queue). | 
 |  * In other words, if we want to kill I/Os or queue them inside us | 
 |  * due to map unavailability, we don't return "busy".  Otherwise, | 
 |  * dm core won't give us the I/Os and we can't do what we want. | 
 |  */ | 
 | static int multipath_busy(struct dm_target *ti) | 
 | { | 
 | 	bool busy = false, has_active = false; | 
 | 	struct multipath *m = ti->private; | 
 | 	struct priority_group *pg, *next_pg; | 
 | 	struct pgpath *pgpath; | 
 |  | 
 | 	/* pg_init in progress */ | 
 | 	if (atomic_read(&m->pg_init_in_progress)) | 
 | 		return true; | 
 |  | 
 | 	/* no paths available, for blk-mq: rely on IO mapping to delay requeue */ | 
 | 	if (!atomic_read(&m->nr_valid_paths)) { | 
 | 		unsigned long flags; | 
 | 		spin_lock_irqsave(&m->lock, flags); | 
 | 		if (test_bit(MPATHF_QUEUE_IF_NO_PATH, &m->flags)) { | 
 | 			spin_unlock_irqrestore(&m->lock, flags); | 
 | 			return (m->queue_mode != DM_TYPE_REQUEST_BASED); | 
 | 		} | 
 | 		spin_unlock_irqrestore(&m->lock, flags); | 
 | 	} | 
 |  | 
 | 	/* Guess which priority_group will be used at next mapping time */ | 
 | 	pg = READ_ONCE(m->current_pg); | 
 | 	next_pg = READ_ONCE(m->next_pg); | 
 | 	if (unlikely(!READ_ONCE(m->current_pgpath) && next_pg)) | 
 | 		pg = next_pg; | 
 |  | 
 | 	if (!pg) { | 
 | 		/* | 
 | 		 * We don't know which pg will be used at next mapping time. | 
 | 		 * We don't call choose_pgpath() here to avoid to trigger | 
 | 		 * pg_init just by busy checking. | 
 | 		 * So we don't know whether underlying devices we will be using | 
 | 		 * at next mapping time are busy or not. Just try mapping. | 
 | 		 */ | 
 | 		return busy; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * If there is one non-busy active path at least, the path selector | 
 | 	 * will be able to select it. So we consider such a pg as not busy. | 
 | 	 */ | 
 | 	busy = true; | 
 | 	list_for_each_entry(pgpath, &pg->pgpaths, list) { | 
 | 		if (pgpath->is_active) { | 
 | 			has_active = true; | 
 | 			if (!pgpath_busy(pgpath)) { | 
 | 				busy = false; | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (!has_active) { | 
 | 		/* | 
 | 		 * No active path in this pg, so this pg won't be used and | 
 | 		 * the current_pg will be changed at next mapping time. | 
 | 		 * We need to try mapping to determine it. | 
 | 		 */ | 
 | 		busy = false; | 
 | 	} | 
 |  | 
 | 	return busy; | 
 | } | 
 |  | 
 | /*----------------------------------------------------------------- | 
 |  * Module setup | 
 |  *---------------------------------------------------------------*/ | 
 | static struct target_type multipath_target = { | 
 | 	.name = "multipath", | 
 | 	.version = {1, 14, 0}, | 
 | 	.features = DM_TARGET_SINGLETON | DM_TARGET_IMMUTABLE | | 
 | 		    DM_TARGET_PASSES_INTEGRITY, | 
 | 	.module = THIS_MODULE, | 
 | 	.ctr = multipath_ctr, | 
 | 	.dtr = multipath_dtr, | 
 | 	.clone_and_map_rq = multipath_clone_and_map, | 
 | 	.release_clone_rq = multipath_release_clone, | 
 | 	.rq_end_io = multipath_end_io, | 
 | 	.map = multipath_map_bio, | 
 | 	.end_io = multipath_end_io_bio, | 
 | 	.presuspend = multipath_presuspend, | 
 | 	.postsuspend = multipath_postsuspend, | 
 | 	.resume = multipath_resume, | 
 | 	.status = multipath_status, | 
 | 	.message = multipath_message, | 
 | 	.prepare_ioctl = multipath_prepare_ioctl, | 
 | 	.iterate_devices = multipath_iterate_devices, | 
 | 	.busy = multipath_busy, | 
 | }; | 
 |  | 
 | static int __init dm_multipath_init(void) | 
 | { | 
 | 	int r; | 
 |  | 
 | 	kmultipathd = alloc_workqueue("kmpathd", WQ_MEM_RECLAIM, 0); | 
 | 	if (!kmultipathd) { | 
 | 		DMERR("failed to create workqueue kmpathd"); | 
 | 		r = -ENOMEM; | 
 | 		goto bad_alloc_kmultipathd; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * A separate workqueue is used to handle the device handlers | 
 | 	 * to avoid overloading existing workqueue. Overloading the | 
 | 	 * old workqueue would also create a bottleneck in the | 
 | 	 * path of the storage hardware device activation. | 
 | 	 */ | 
 | 	kmpath_handlerd = alloc_ordered_workqueue("kmpath_handlerd", | 
 | 						  WQ_MEM_RECLAIM); | 
 | 	if (!kmpath_handlerd) { | 
 | 		DMERR("failed to create workqueue kmpath_handlerd"); | 
 | 		r = -ENOMEM; | 
 | 		goto bad_alloc_kmpath_handlerd; | 
 | 	} | 
 |  | 
 | 	r = dm_register_target(&multipath_target); | 
 | 	if (r < 0) { | 
 | 		DMERR("request-based register failed %d", r); | 
 | 		r = -EINVAL; | 
 | 		goto bad_register_target; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | bad_register_target: | 
 | 	destroy_workqueue(kmpath_handlerd); | 
 | bad_alloc_kmpath_handlerd: | 
 | 	destroy_workqueue(kmultipathd); | 
 | bad_alloc_kmultipathd: | 
 | 	return r; | 
 | } | 
 |  | 
 | static void __exit dm_multipath_exit(void) | 
 | { | 
 | 	destroy_workqueue(kmpath_handlerd); | 
 | 	destroy_workqueue(kmultipathd); | 
 |  | 
 | 	dm_unregister_target(&multipath_target); | 
 | } | 
 |  | 
 | module_init(dm_multipath_init); | 
 | module_exit(dm_multipath_exit); | 
 |  | 
 | module_param_named(queue_if_no_path_timeout_secs, | 
 | 		   queue_if_no_path_timeout_secs, ulong, S_IRUGO | S_IWUSR); | 
 | MODULE_PARM_DESC(queue_if_no_path_timeout_secs, "No available paths queue IO timeout in seconds"); | 
 |  | 
 | MODULE_DESCRIPTION(DM_NAME " multipath target"); | 
 | MODULE_AUTHOR("Sistina Software <dm-devel@redhat.com>"); | 
 | MODULE_LICENSE("GPL"); |