| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * This module provides an interface to trigger and test firmware loading. | |
| * | |
| * It is designed to be used for basic evaluation of the firmware loading | |
| * subsystem (for example when validating firmware verification). It lacks | |
| * any extra dependencies, and will not normally be loaded by the system | |
| * unless explicitly requested by name. | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/printk.h> | |
| #include <linux/completion.h> | |
| #include <linux/firmware.h> | |
| #include <linux/device.h> | |
| #include <linux/fs.h> | |
| #include <linux/miscdevice.h> | |
| #include <linux/sizes.h> | |
| #include <linux/slab.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/delay.h> | |
| #include <linux/kstrtox.h> | |
| #include <linux/kthread.h> | |
| #include <linux/vmalloc.h> | |
| #include <linux/efi_embedded_fw.h> | |
| MODULE_IMPORT_NS(TEST_FIRMWARE); | |
| #define TEST_FIRMWARE_NAME "test-firmware.bin" | |
| #define TEST_FIRMWARE_NUM_REQS 4 | |
| #define TEST_FIRMWARE_BUF_SIZE SZ_1K | |
| #define TEST_UPLOAD_MAX_SIZE SZ_2K | |
| #define TEST_UPLOAD_BLK_SIZE 37 /* Avoid powers of two in testing */ | |
| static DEFINE_MUTEX(test_fw_mutex); | |
| static const struct firmware *test_firmware; | |
| static LIST_HEAD(test_upload_list); | |
| struct test_batched_req { | |
| u8 idx; | |
| int rc; | |
| bool sent; | |
| const struct firmware *fw; | |
| const char *name; | |
| const char *fw_buf; | |
| struct completion completion; | |
| struct task_struct *task; | |
| struct device *dev; | |
| }; | |
| /** | |
| * struct test_config - represents configuration for the test for different triggers | |
| * | |
| * @name: the name of the firmware file to look for | |
| * @into_buf: when the into_buf is used if this is true | |
| * request_firmware_into_buf() will be used instead. | |
| * @buf_size: size of buf to allocate when into_buf is true | |
| * @file_offset: file offset to request when calling request_firmware_into_buf | |
| * @partial: partial read opt when calling request_firmware_into_buf | |
| * @sync_direct: when the sync trigger is used if this is true | |
| * request_firmware_direct() will be used instead. | |
| * @send_uevent: whether or not to send a uevent for async requests | |
| * @num_requests: number of requests to try per test case. This is trigger | |
| * specific. | |
| * @reqs: stores all requests information | |
| * @read_fw_idx: index of thread from which we want to read firmware results | |
| * from through the read_fw trigger. | |
| * @upload_name: firmware name to be used with upload_read sysfs node | |
| * @test_result: a test may use this to collect the result from the call | |
| * of the request_firmware*() calls used in their tests. In order of | |
| * priority we always keep first any setup error. If no setup errors were | |
| * found then we move on to the first error encountered while running the | |
| * API. Note that for async calls this typically will be a successful | |
| * result (0) unless of course you've used bogus parameters, or the system | |
| * is out of memory. In the async case the callback is expected to do a | |
| * bit more homework to figure out what happened, unfortunately the only | |
| * information passed today on error is the fact that no firmware was | |
| * found so we can only assume -ENOENT on async calls if the firmware is | |
| * NULL. | |
| * | |
| * Errors you can expect: | |
| * | |
| * API specific: | |
| * | |
| * 0: success for sync, for async it means request was sent | |
| * -EINVAL: invalid parameters or request | |
| * -ENOENT: files not found | |
| * | |
| * System environment: | |
| * | |
| * -ENOMEM: memory pressure on system | |
| * -ENODEV: out of number of devices to test | |
| * -EINVAL: an unexpected error has occurred | |
| * @req_firmware: if @sync_direct is true this is set to | |
| * request_firmware_direct(), otherwise request_firmware() | |
| */ | |
| struct test_config { | |
| char *name; | |
| bool into_buf; | |
| size_t buf_size; | |
| size_t file_offset; | |
| bool partial; | |
| bool sync_direct; | |
| bool send_uevent; | |
| u8 num_requests; | |
| u8 read_fw_idx; | |
| char *upload_name; | |
| /* | |
| * These below don't belong her but we'll move them once we create | |
| * a struct fw_test_device and stuff the misc_dev under there later. | |
| */ | |
| struct test_batched_req *reqs; | |
| int test_result; | |
| int (*req_firmware)(const struct firmware **fw, const char *name, | |
| struct device *device); | |
| }; | |
| struct upload_inject_err { | |
| const char *prog; | |
| enum fw_upload_err err_code; | |
| }; | |
| struct test_firmware_upload { | |
| char *name; | |
| struct list_head node; | |
| char *buf; | |
| size_t size; | |
| bool cancel_request; | |
| struct upload_inject_err inject; | |
| struct fw_upload *fwl; | |
| }; | |
| static struct test_config *test_fw_config; | |
| static struct test_firmware_upload *upload_lookup_name(const char *name) | |
| { | |
| struct test_firmware_upload *tst; | |
| list_for_each_entry(tst, &test_upload_list, node) | |
| if (strncmp(name, tst->name, strlen(tst->name)) == 0) | |
| return tst; | |
| return NULL; | |
| } | |
| static ssize_t test_fw_misc_read(struct file *f, char __user *buf, | |
| size_t size, loff_t *offset) | |
| { | |
| ssize_t rc = 0; | |
| mutex_lock(&test_fw_mutex); | |
| if (test_firmware) | |
| rc = simple_read_from_buffer(buf, size, offset, | |
| test_firmware->data, | |
| test_firmware->size); | |
| mutex_unlock(&test_fw_mutex); | |
| return rc; | |
| } | |
| static const struct file_operations test_fw_fops = { | |
| .owner = THIS_MODULE, | |
| .read = test_fw_misc_read, | |
| }; | |
| static void __test_release_all_firmware(void) | |
| { | |
| struct test_batched_req *req; | |
| u8 i; | |
| if (!test_fw_config->reqs) | |
| return; | |
| for (i = 0; i < test_fw_config->num_requests; i++) { | |
| req = &test_fw_config->reqs[i]; | |
| if (req->fw) { | |
| if (req->fw_buf) { | |
| kfree_const(req->fw_buf); | |
| req->fw_buf = NULL; | |
| } | |
| release_firmware(req->fw); | |
| req->fw = NULL; | |
| } | |
| } | |
| vfree(test_fw_config->reqs); | |
| test_fw_config->reqs = NULL; | |
| } | |
| static void test_release_all_firmware(void) | |
| { | |
| mutex_lock(&test_fw_mutex); | |
| __test_release_all_firmware(); | |
| mutex_unlock(&test_fw_mutex); | |
| } | |
| static void __test_firmware_config_free(void) | |
| { | |
| __test_release_all_firmware(); | |
| kfree_const(test_fw_config->name); | |
| test_fw_config->name = NULL; | |
| } | |
| /* | |
| * XXX: move to kstrncpy() once merged. | |
| * | |
| * Users should use kfree_const() when freeing these. | |
| */ | |
| static int __kstrncpy(char **dst, const char *name, size_t count, gfp_t gfp) | |
| { | |
| *dst = kstrndup(name, count, gfp); | |
| if (!*dst) | |
| return -ENOMEM; | |
| return count; | |
| } | |
| static int __test_firmware_config_init(void) | |
| { | |
| int ret; | |
| ret = __kstrncpy(&test_fw_config->name, TEST_FIRMWARE_NAME, | |
| strlen(TEST_FIRMWARE_NAME), GFP_KERNEL); | |
| if (ret < 0) | |
| goto out; | |
| test_fw_config->num_requests = TEST_FIRMWARE_NUM_REQS; | |
| test_fw_config->send_uevent = true; | |
| test_fw_config->into_buf = false; | |
| test_fw_config->buf_size = TEST_FIRMWARE_BUF_SIZE; | |
| test_fw_config->file_offset = 0; | |
| test_fw_config->partial = false; | |
| test_fw_config->sync_direct = false; | |
| test_fw_config->req_firmware = request_firmware; | |
| test_fw_config->test_result = 0; | |
| test_fw_config->reqs = NULL; | |
| test_fw_config->upload_name = NULL; | |
| return 0; | |
| out: | |
| __test_firmware_config_free(); | |
| return ret; | |
| } | |
| static ssize_t reset_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| int ret; | |
| mutex_lock(&test_fw_mutex); | |
| __test_firmware_config_free(); | |
| ret = __test_firmware_config_init(); | |
| if (ret < 0) { | |
| ret = -ENOMEM; | |
| pr_err("could not alloc settings for config trigger: %d\n", | |
| ret); | |
| goto out; | |
| } | |
| pr_info("reset\n"); | |
| ret = count; | |
| out: | |
| mutex_unlock(&test_fw_mutex); | |
| return ret; | |
| } | |
| static DEVICE_ATTR_WO(reset); | |
| static ssize_t config_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| int len = 0; | |
| mutex_lock(&test_fw_mutex); | |
| len += scnprintf(buf, PAGE_SIZE - len, | |
| "Custom trigger configuration for: %s\n", | |
| dev_name(dev)); | |
| if (test_fw_config->name) | |
| len += scnprintf(buf + len, PAGE_SIZE - len, | |
| "name:\t%s\n", | |
| test_fw_config->name); | |
| else | |
| len += scnprintf(buf + len, PAGE_SIZE - len, | |
| "name:\tEMPTY\n"); | |
| len += scnprintf(buf + len, PAGE_SIZE - len, | |
| "num_requests:\t%u\n", test_fw_config->num_requests); | |
| len += scnprintf(buf + len, PAGE_SIZE - len, | |
| "send_uevent:\t\t%s\n", | |
| test_fw_config->send_uevent ? | |
| "FW_ACTION_UEVENT" : | |
| "FW_ACTION_NOUEVENT"); | |
| len += scnprintf(buf + len, PAGE_SIZE - len, | |
| "into_buf:\t\t%s\n", | |
| test_fw_config->into_buf ? "true" : "false"); | |
| len += scnprintf(buf + len, PAGE_SIZE - len, | |
| "buf_size:\t%zu\n", test_fw_config->buf_size); | |
| len += scnprintf(buf + len, PAGE_SIZE - len, | |
| "file_offset:\t%zu\n", test_fw_config->file_offset); | |
| len += scnprintf(buf + len, PAGE_SIZE - len, | |
| "partial:\t\t%s\n", | |
| test_fw_config->partial ? "true" : "false"); | |
| len += scnprintf(buf + len, PAGE_SIZE - len, | |
| "sync_direct:\t\t%s\n", | |
| test_fw_config->sync_direct ? "true" : "false"); | |
| len += scnprintf(buf + len, PAGE_SIZE - len, | |
| "read_fw_idx:\t%u\n", test_fw_config->read_fw_idx); | |
| if (test_fw_config->upload_name) | |
| len += scnprintf(buf + len, PAGE_SIZE - len, | |
| "upload_name:\t%s\n", | |
| test_fw_config->upload_name); | |
| else | |
| len += scnprintf(buf + len, PAGE_SIZE - len, | |
| "upload_name:\tEMPTY\n"); | |
| mutex_unlock(&test_fw_mutex); | |
| return len; | |
| } | |
| static DEVICE_ATTR_RO(config); | |
| static ssize_t config_name_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| int ret; | |
| mutex_lock(&test_fw_mutex); | |
| kfree_const(test_fw_config->name); | |
| ret = __kstrncpy(&test_fw_config->name, buf, count, GFP_KERNEL); | |
| mutex_unlock(&test_fw_mutex); | |
| return ret; | |
| } | |
| /* | |
| * As per sysfs_kf_seq_show() the buf is max PAGE_SIZE. | |
| */ | |
| static ssize_t config_test_show_str(char *dst, | |
| char *src) | |
| { | |
| int len; | |
| mutex_lock(&test_fw_mutex); | |
| len = snprintf(dst, PAGE_SIZE, "%s\n", src); | |
| mutex_unlock(&test_fw_mutex); | |
| return len; | |
| } | |
| static inline int __test_dev_config_update_bool(const char *buf, size_t size, | |
| bool *cfg) | |
| { | |
| int ret; | |
| if (kstrtobool(buf, cfg) < 0) | |
| ret = -EINVAL; | |
| else | |
| ret = size; | |
| return ret; | |
| } | |
| static int test_dev_config_update_bool(const char *buf, size_t size, | |
| bool *cfg) | |
| { | |
| int ret; | |
| mutex_lock(&test_fw_mutex); | |
| ret = __test_dev_config_update_bool(buf, size, cfg); | |
| mutex_unlock(&test_fw_mutex); | |
| return ret; | |
| } | |
| static ssize_t test_dev_config_show_bool(char *buf, bool val) | |
| { | |
| return snprintf(buf, PAGE_SIZE, "%d\n", val); | |
| } | |
| static int __test_dev_config_update_size_t( | |
| const char *buf, | |
| size_t size, | |
| size_t *cfg) | |
| { | |
| int ret; | |
| long new; | |
| ret = kstrtol(buf, 10, &new); | |
| if (ret) | |
| return ret; | |
| *(size_t *)cfg = new; | |
| /* Always return full write size even if we didn't consume all */ | |
| return size; | |
| } | |
| static ssize_t test_dev_config_show_size_t(char *buf, size_t val) | |
| { | |
| return snprintf(buf, PAGE_SIZE, "%zu\n", val); | |
| } | |
| static ssize_t test_dev_config_show_int(char *buf, int val) | |
| { | |
| return snprintf(buf, PAGE_SIZE, "%d\n", val); | |
| } | |
| static int __test_dev_config_update_u8(const char *buf, size_t size, u8 *cfg) | |
| { | |
| u8 val; | |
| int ret; | |
| ret = kstrtou8(buf, 10, &val); | |
| if (ret) | |
| return ret; | |
| *(u8 *)cfg = val; | |
| /* Always return full write size even if we didn't consume all */ | |
| return size; | |
| } | |
| static int test_dev_config_update_u8(const char *buf, size_t size, u8 *cfg) | |
| { | |
| int ret; | |
| mutex_lock(&test_fw_mutex); | |
| ret = __test_dev_config_update_u8(buf, size, cfg); | |
| mutex_unlock(&test_fw_mutex); | |
| return ret; | |
| } | |
| static ssize_t test_dev_config_show_u8(char *buf, u8 val) | |
| { | |
| return snprintf(buf, PAGE_SIZE, "%u\n", val); | |
| } | |
| static ssize_t config_name_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return config_test_show_str(buf, test_fw_config->name); | |
| } | |
| static DEVICE_ATTR_RW(config_name); | |
| static ssize_t config_upload_name_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct test_firmware_upload *tst; | |
| int ret = count; | |
| mutex_lock(&test_fw_mutex); | |
| tst = upload_lookup_name(buf); | |
| if (tst) | |
| test_fw_config->upload_name = tst->name; | |
| else | |
| ret = -EINVAL; | |
| mutex_unlock(&test_fw_mutex); | |
| return ret; | |
| } | |
| static ssize_t config_upload_name_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return config_test_show_str(buf, test_fw_config->upload_name); | |
| } | |
| static DEVICE_ATTR_RW(config_upload_name); | |
| static ssize_t config_num_requests_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| int rc; | |
| mutex_lock(&test_fw_mutex); | |
| if (test_fw_config->reqs) { | |
| pr_err("Must call release_all_firmware prior to changing config\n"); | |
| rc = -EINVAL; | |
| mutex_unlock(&test_fw_mutex); | |
| goto out; | |
| } | |
| rc = __test_dev_config_update_u8(buf, count, | |
| &test_fw_config->num_requests); | |
| mutex_unlock(&test_fw_mutex); | |
| out: | |
| return rc; | |
| } | |
| static ssize_t config_num_requests_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return test_dev_config_show_u8(buf, test_fw_config->num_requests); | |
| } | |
| static DEVICE_ATTR_RW(config_num_requests); | |
| static ssize_t config_into_buf_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| return test_dev_config_update_bool(buf, | |
| count, | |
| &test_fw_config->into_buf); | |
| } | |
| static ssize_t config_into_buf_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return test_dev_config_show_bool(buf, test_fw_config->into_buf); | |
| } | |
| static DEVICE_ATTR_RW(config_into_buf); | |
| static ssize_t config_buf_size_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| int rc; | |
| mutex_lock(&test_fw_mutex); | |
| if (test_fw_config->reqs) { | |
| pr_err("Must call release_all_firmware prior to changing config\n"); | |
| rc = -EINVAL; | |
| mutex_unlock(&test_fw_mutex); | |
| goto out; | |
| } | |
| rc = __test_dev_config_update_size_t(buf, count, | |
| &test_fw_config->buf_size); | |
| mutex_unlock(&test_fw_mutex); | |
| out: | |
| return rc; | |
| } | |
| static ssize_t config_buf_size_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return test_dev_config_show_size_t(buf, test_fw_config->buf_size); | |
| } | |
| static DEVICE_ATTR_RW(config_buf_size); | |
| static ssize_t config_file_offset_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| int rc; | |
| mutex_lock(&test_fw_mutex); | |
| if (test_fw_config->reqs) { | |
| pr_err("Must call release_all_firmware prior to changing config\n"); | |
| rc = -EINVAL; | |
| mutex_unlock(&test_fw_mutex); | |
| goto out; | |
| } | |
| rc = __test_dev_config_update_size_t(buf, count, | |
| &test_fw_config->file_offset); | |
| mutex_unlock(&test_fw_mutex); | |
| out: | |
| return rc; | |
| } | |
| static ssize_t config_file_offset_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return test_dev_config_show_size_t(buf, test_fw_config->file_offset); | |
| } | |
| static DEVICE_ATTR_RW(config_file_offset); | |
| static ssize_t config_partial_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| return test_dev_config_update_bool(buf, | |
| count, | |
| &test_fw_config->partial); | |
| } | |
| static ssize_t config_partial_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return test_dev_config_show_bool(buf, test_fw_config->partial); | |
| } | |
| static DEVICE_ATTR_RW(config_partial); | |
| static ssize_t config_sync_direct_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| int rc = test_dev_config_update_bool(buf, count, | |
| &test_fw_config->sync_direct); | |
| if (rc == count) | |
| test_fw_config->req_firmware = test_fw_config->sync_direct ? | |
| request_firmware_direct : | |
| request_firmware; | |
| return rc; | |
| } | |
| static ssize_t config_sync_direct_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return test_dev_config_show_bool(buf, test_fw_config->sync_direct); | |
| } | |
| static DEVICE_ATTR_RW(config_sync_direct); | |
| static ssize_t config_send_uevent_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| return test_dev_config_update_bool(buf, count, | |
| &test_fw_config->send_uevent); | |
| } | |
| static ssize_t config_send_uevent_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return test_dev_config_show_bool(buf, test_fw_config->send_uevent); | |
| } | |
| static DEVICE_ATTR_RW(config_send_uevent); | |
| static ssize_t config_read_fw_idx_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| return test_dev_config_update_u8(buf, count, | |
| &test_fw_config->read_fw_idx); | |
| } | |
| static ssize_t config_read_fw_idx_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return test_dev_config_show_u8(buf, test_fw_config->read_fw_idx); | |
| } | |
| static DEVICE_ATTR_RW(config_read_fw_idx); | |
| static ssize_t trigger_request_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| int rc; | |
| char *name; | |
| name = kstrndup(buf, count, GFP_KERNEL); | |
| if (!name) | |
| return -ENOMEM; | |
| pr_info("loading '%s'\n", name); | |
| mutex_lock(&test_fw_mutex); | |
| release_firmware(test_firmware); | |
| if (test_fw_config->reqs) | |
| __test_release_all_firmware(); | |
| test_firmware = NULL; | |
| rc = request_firmware(&test_firmware, name, dev); | |
| if (rc) { | |
| pr_info("load of '%s' failed: %d\n", name, rc); | |
| goto out; | |
| } | |
| pr_info("loaded: %zu\n", test_firmware->size); | |
| rc = count; | |
| out: | |
| mutex_unlock(&test_fw_mutex); | |
| kfree(name); | |
| return rc; | |
| } | |
| static DEVICE_ATTR_WO(trigger_request); | |
| #ifdef CONFIG_EFI_EMBEDDED_FIRMWARE | |
| extern struct list_head efi_embedded_fw_list; | |
| extern bool efi_embedded_fw_checked; | |
| static ssize_t trigger_request_platform_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| static const u8 test_data[] = { | |
| 0x55, 0xaa, 0x55, 0xaa, 0x01, 0x02, 0x03, 0x04, | |
| 0x55, 0xaa, 0x55, 0xaa, 0x05, 0x06, 0x07, 0x08, | |
| 0x55, 0xaa, 0x55, 0xaa, 0x10, 0x20, 0x30, 0x40, | |
| 0x55, 0xaa, 0x55, 0xaa, 0x50, 0x60, 0x70, 0x80 | |
| }; | |
| struct efi_embedded_fw efi_embedded_fw; | |
| const struct firmware *firmware = NULL; | |
| bool saved_efi_embedded_fw_checked; | |
| char *name; | |
| int rc; | |
| name = kstrndup(buf, count, GFP_KERNEL); | |
| if (!name) | |
| return -ENOMEM; | |
| pr_info("inserting test platform fw '%s'\n", name); | |
| efi_embedded_fw.name = name; | |
| efi_embedded_fw.data = (void *)test_data; | |
| efi_embedded_fw.length = sizeof(test_data); | |
| list_add(&efi_embedded_fw.list, &efi_embedded_fw_list); | |
| saved_efi_embedded_fw_checked = efi_embedded_fw_checked; | |
| efi_embedded_fw_checked = true; | |
| pr_info("loading '%s'\n", name); | |
| rc = firmware_request_platform(&firmware, name, dev); | |
| if (rc) { | |
| pr_info("load of '%s' failed: %d\n", name, rc); | |
| goto out; | |
| } | |
| if (firmware->size != sizeof(test_data) || | |
| memcmp(firmware->data, test_data, sizeof(test_data)) != 0) { | |
| pr_info("firmware contents mismatch for '%s'\n", name); | |
| rc = -EINVAL; | |
| goto out; | |
| } | |
| pr_info("loaded: %zu\n", firmware->size); | |
| rc = count; | |
| out: | |
| efi_embedded_fw_checked = saved_efi_embedded_fw_checked; | |
| release_firmware(firmware); | |
| list_del(&efi_embedded_fw.list); | |
| kfree(name); | |
| return rc; | |
| } | |
| static DEVICE_ATTR_WO(trigger_request_platform); | |
| #endif | |
| static DECLARE_COMPLETION(async_fw_done); | |
| static void trigger_async_request_cb(const struct firmware *fw, void *context) | |
| { | |
| test_firmware = fw; | |
| complete(&async_fw_done); | |
| } | |
| static ssize_t trigger_async_request_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| int rc; | |
| char *name; | |
| name = kstrndup(buf, count, GFP_KERNEL); | |
| if (!name) | |
| return -ENOMEM; | |
| pr_info("loading '%s'\n", name); | |
| mutex_lock(&test_fw_mutex); | |
| release_firmware(test_firmware); | |
| test_firmware = NULL; | |
| if (test_fw_config->reqs) | |
| __test_release_all_firmware(); | |
| rc = request_firmware_nowait(THIS_MODULE, 1, name, dev, GFP_KERNEL, | |
| NULL, trigger_async_request_cb); | |
| if (rc) { | |
| pr_info("async load of '%s' failed: %d\n", name, rc); | |
| kfree(name); | |
| goto out; | |
| } | |
| /* Free 'name' ASAP, to test for race conditions */ | |
| kfree(name); | |
| wait_for_completion(&async_fw_done); | |
| if (test_firmware) { | |
| pr_info("loaded: %zu\n", test_firmware->size); | |
| rc = count; | |
| } else { | |
| pr_err("failed to async load firmware\n"); | |
| rc = -ENOMEM; | |
| } | |
| out: | |
| mutex_unlock(&test_fw_mutex); | |
| return rc; | |
| } | |
| static DEVICE_ATTR_WO(trigger_async_request); | |
| static ssize_t trigger_custom_fallback_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| int rc; | |
| char *name; | |
| name = kstrndup(buf, count, GFP_KERNEL); | |
| if (!name) | |
| return -ENOMEM; | |
| pr_info("loading '%s' using custom fallback mechanism\n", name); | |
| mutex_lock(&test_fw_mutex); | |
| release_firmware(test_firmware); | |
| if (test_fw_config->reqs) | |
| __test_release_all_firmware(); | |
| test_firmware = NULL; | |
| rc = request_firmware_nowait(THIS_MODULE, FW_ACTION_NOUEVENT, name, | |
| dev, GFP_KERNEL, NULL, | |
| trigger_async_request_cb); | |
| if (rc) { | |
| pr_info("async load of '%s' failed: %d\n", name, rc); | |
| kfree(name); | |
| goto out; | |
| } | |
| /* Free 'name' ASAP, to test for race conditions */ | |
| kfree(name); | |
| wait_for_completion(&async_fw_done); | |
| if (test_firmware) { | |
| pr_info("loaded: %zu\n", test_firmware->size); | |
| rc = count; | |
| } else { | |
| pr_err("failed to async load firmware\n"); | |
| rc = -ENODEV; | |
| } | |
| out: | |
| mutex_unlock(&test_fw_mutex); | |
| return rc; | |
| } | |
| static DEVICE_ATTR_WO(trigger_custom_fallback); | |
| static int test_fw_run_batch_request(void *data) | |
| { | |
| struct test_batched_req *req = data; | |
| if (!req) { | |
| test_fw_config->test_result = -EINVAL; | |
| return -EINVAL; | |
| } | |
| if (test_fw_config->into_buf) { | |
| void *test_buf; | |
| test_buf = kzalloc(TEST_FIRMWARE_BUF_SIZE, GFP_KERNEL); | |
| if (!test_buf) | |
| return -ENOMEM; | |
| if (test_fw_config->partial) | |
| req->rc = request_partial_firmware_into_buf | |
| (&req->fw, | |
| req->name, | |
| req->dev, | |
| test_buf, | |
| test_fw_config->buf_size, | |
| test_fw_config->file_offset); | |
| else | |
| req->rc = request_firmware_into_buf | |
| (&req->fw, | |
| req->name, | |
| req->dev, | |
| test_buf, | |
| test_fw_config->buf_size); | |
| if (!req->fw) | |
| kfree(test_buf); | |
| else | |
| req->fw_buf = test_buf; | |
| } else { | |
| req->rc = test_fw_config->req_firmware(&req->fw, | |
| req->name, | |
| req->dev); | |
| } | |
| if (req->rc) { | |
| pr_info("#%u: batched sync load failed: %d\n", | |
| req->idx, req->rc); | |
| if (!test_fw_config->test_result) | |
| test_fw_config->test_result = req->rc; | |
| } else if (req->fw) { | |
| req->sent = true; | |
| pr_info("#%u: batched sync loaded %zu\n", | |
| req->idx, req->fw->size); | |
| } | |
| complete(&req->completion); | |
| req->task = NULL; | |
| return 0; | |
| } | |
| /* | |
| * We use a kthread as otherwise the kernel serializes all our sync requests | |
| * and we would not be able to mimic batched requests on a sync call. Batched | |
| * requests on a sync call can for instance happen on a device driver when | |
| * multiple cards are used and firmware loading happens outside of probe. | |
| */ | |
| static ssize_t trigger_batched_requests_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct test_batched_req *req; | |
| int rc; | |
| u8 i; | |
| mutex_lock(&test_fw_mutex); | |
| if (test_fw_config->reqs) { | |
| rc = -EBUSY; | |
| goto out_bail; | |
| } | |
| test_fw_config->reqs = | |
| vzalloc(array3_size(sizeof(struct test_batched_req), | |
| test_fw_config->num_requests, 2)); | |
| if (!test_fw_config->reqs) { | |
| rc = -ENOMEM; | |
| goto out_unlock; | |
| } | |
| pr_info("batched sync firmware loading '%s' %u times\n", | |
| test_fw_config->name, test_fw_config->num_requests); | |
| for (i = 0; i < test_fw_config->num_requests; i++) { | |
| req = &test_fw_config->reqs[i]; | |
| req->fw = NULL; | |
| req->idx = i; | |
| req->name = test_fw_config->name; | |
| req->fw_buf = NULL; | |
| req->dev = dev; | |
| init_completion(&req->completion); | |
| req->task = kthread_run(test_fw_run_batch_request, req, | |
| "%s-%u", KBUILD_MODNAME, req->idx); | |
| if (!req->task || IS_ERR(req->task)) { | |
| pr_err("Setting up thread %u failed\n", req->idx); | |
| req->task = NULL; | |
| rc = -ENOMEM; | |
| goto out_bail; | |
| } | |
| } | |
| rc = count; | |
| /* | |
| * We require an explicit release to enable more time and delay of | |
| * calling release_firmware() to improve our chances of forcing a | |
| * batched request. If we instead called release_firmware() right away | |
| * then we might miss on an opportunity of having a successful firmware | |
| * request pass on the opportunity to be come a batched request. | |
| */ | |
| out_bail: | |
| for (i = 0; i < test_fw_config->num_requests; i++) { | |
| req = &test_fw_config->reqs[i]; | |
| if (req->task || req->sent) | |
| wait_for_completion(&req->completion); | |
| } | |
| /* Override any worker error if we had a general setup error */ | |
| if (rc < 0) | |
| test_fw_config->test_result = rc; | |
| out_unlock: | |
| mutex_unlock(&test_fw_mutex); | |
| return rc; | |
| } | |
| static DEVICE_ATTR_WO(trigger_batched_requests); | |
| /* | |
| * We wait for each callback to return with the lock held, no need to lock here | |
| */ | |
| static void trigger_batched_cb(const struct firmware *fw, void *context) | |
| { | |
| struct test_batched_req *req = context; | |
| if (!req) { | |
| test_fw_config->test_result = -EINVAL; | |
| return; | |
| } | |
| /* forces *some* batched requests to queue up */ | |
| if (!req->idx) | |
| ssleep(2); | |
| req->fw = fw; | |
| /* | |
| * Unfortunately the firmware API gives us nothing other than a null FW | |
| * if the firmware was not found on async requests. Best we can do is | |
| * just assume -ENOENT. A better API would pass the actual return | |
| * value to the callback. | |
| */ | |
| if (!fw && !test_fw_config->test_result) | |
| test_fw_config->test_result = -ENOENT; | |
| complete(&req->completion); | |
| } | |
| static | |
| ssize_t trigger_batched_requests_async_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct test_batched_req *req; | |
| bool send_uevent; | |
| int rc; | |
| u8 i; | |
| mutex_lock(&test_fw_mutex); | |
| if (test_fw_config->reqs) { | |
| rc = -EBUSY; | |
| goto out_bail; | |
| } | |
| test_fw_config->reqs = | |
| vzalloc(array3_size(sizeof(struct test_batched_req), | |
| test_fw_config->num_requests, 2)); | |
| if (!test_fw_config->reqs) { | |
| rc = -ENOMEM; | |
| goto out; | |
| } | |
| pr_info("batched loading '%s' custom fallback mechanism %u times\n", | |
| test_fw_config->name, test_fw_config->num_requests); | |
| send_uevent = test_fw_config->send_uevent ? FW_ACTION_UEVENT : | |
| FW_ACTION_NOUEVENT; | |
| for (i = 0; i < test_fw_config->num_requests; i++) { | |
| req = &test_fw_config->reqs[i]; | |
| req->name = test_fw_config->name; | |
| req->fw_buf = NULL; | |
| req->fw = NULL; | |
| req->idx = i; | |
| init_completion(&req->completion); | |
| rc = request_firmware_nowait(THIS_MODULE, send_uevent, | |
| req->name, | |
| dev, GFP_KERNEL, req, | |
| trigger_batched_cb); | |
| if (rc) { | |
| pr_info("#%u: batched async load failed setup: %d\n", | |
| i, rc); | |
| req->rc = rc; | |
| goto out_bail; | |
| } else | |
| req->sent = true; | |
| } | |
| rc = count; | |
| out_bail: | |
| /* | |
| * We require an explicit release to enable more time and delay of | |
| * calling release_firmware() to improve our chances of forcing a | |
| * batched request. If we instead called release_firmware() right away | |
| * then we might miss on an opportunity of having a successful firmware | |
| * request pass on the opportunity to be come a batched request. | |
| */ | |
| for (i = 0; i < test_fw_config->num_requests; i++) { | |
| req = &test_fw_config->reqs[i]; | |
| if (req->sent) | |
| wait_for_completion(&req->completion); | |
| } | |
| /* Override any worker error if we had a general setup error */ | |
| if (rc < 0) | |
| test_fw_config->test_result = rc; | |
| out: | |
| mutex_unlock(&test_fw_mutex); | |
| return rc; | |
| } | |
| static DEVICE_ATTR_WO(trigger_batched_requests_async); | |
| static void upload_release(struct test_firmware_upload *tst) | |
| { | |
| firmware_upload_unregister(tst->fwl); | |
| kfree(tst->buf); | |
| kfree(tst->name); | |
| kfree(tst); | |
| } | |
| static void upload_release_all(void) | |
| { | |
| struct test_firmware_upload *tst, *tmp; | |
| list_for_each_entry_safe(tst, tmp, &test_upload_list, node) { | |
| list_del(&tst->node); | |
| upload_release(tst); | |
| } | |
| test_fw_config->upload_name = NULL; | |
| } | |
| /* | |
| * This table is replicated from .../firmware_loader/sysfs_upload.c | |
| * and needs to be kept in sync. | |
| */ | |
| static const char * const fw_upload_err_str[] = { | |
| [FW_UPLOAD_ERR_NONE] = "none", | |
| [FW_UPLOAD_ERR_HW_ERROR] = "hw-error", | |
| [FW_UPLOAD_ERR_TIMEOUT] = "timeout", | |
| [FW_UPLOAD_ERR_CANCELED] = "user-abort", | |
| [FW_UPLOAD_ERR_BUSY] = "device-busy", | |
| [FW_UPLOAD_ERR_INVALID_SIZE] = "invalid-file-size", | |
| [FW_UPLOAD_ERR_RW_ERROR] = "read-write-error", | |
| [FW_UPLOAD_ERR_WEAROUT] = "flash-wearout", | |
| }; | |
| static void upload_err_inject_error(struct test_firmware_upload *tst, | |
| const u8 *p, const char *prog) | |
| { | |
| enum fw_upload_err err; | |
| for (err = FW_UPLOAD_ERR_NONE + 1; err < FW_UPLOAD_ERR_MAX; err++) { | |
| if (strncmp(p, fw_upload_err_str[err], | |
| strlen(fw_upload_err_str[err])) == 0) { | |
| tst->inject.prog = prog; | |
| tst->inject.err_code = err; | |
| return; | |
| } | |
| } | |
| } | |
| static void upload_err_inject_prog(struct test_firmware_upload *tst, | |
| const u8 *p) | |
| { | |
| static const char * const progs[] = { | |
| "preparing:", "transferring:", "programming:" | |
| }; | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(progs); i++) { | |
| if (strncmp(p, progs[i], strlen(progs[i])) == 0) { | |
| upload_err_inject_error(tst, p + strlen(progs[i]), | |
| progs[i]); | |
| return; | |
| } | |
| } | |
| } | |
| #define FIVE_MINUTES_MS (5 * 60 * 1000) | |
| static enum fw_upload_err | |
| fw_upload_wait_on_cancel(struct test_firmware_upload *tst) | |
| { | |
| int ms_delay; | |
| for (ms_delay = 0; ms_delay < FIVE_MINUTES_MS; ms_delay += 100) { | |
| msleep(100); | |
| if (tst->cancel_request) | |
| return FW_UPLOAD_ERR_CANCELED; | |
| } | |
| return FW_UPLOAD_ERR_NONE; | |
| } | |
| static enum fw_upload_err test_fw_upload_prepare(struct fw_upload *fwl, | |
| const u8 *data, u32 size) | |
| { | |
| struct test_firmware_upload *tst = fwl->dd_handle; | |
| enum fw_upload_err ret = FW_UPLOAD_ERR_NONE; | |
| const char *progress = "preparing:"; | |
| tst->cancel_request = false; | |
| if (!size || size > TEST_UPLOAD_MAX_SIZE) { | |
| ret = FW_UPLOAD_ERR_INVALID_SIZE; | |
| goto err_out; | |
| } | |
| if (strncmp(data, "inject:", strlen("inject:")) == 0) | |
| upload_err_inject_prog(tst, data + strlen("inject:")); | |
| memset(tst->buf, 0, TEST_UPLOAD_MAX_SIZE); | |
| tst->size = size; | |
| if (tst->inject.err_code == FW_UPLOAD_ERR_NONE || | |
| strncmp(tst->inject.prog, progress, strlen(progress)) != 0) | |
| return FW_UPLOAD_ERR_NONE; | |
| if (tst->inject.err_code == FW_UPLOAD_ERR_CANCELED) | |
| ret = fw_upload_wait_on_cancel(tst); | |
| else | |
| ret = tst->inject.err_code; | |
| err_out: | |
| /* | |
| * The cleanup op only executes if the prepare op succeeds. | |
| * If the prepare op fails, it must do it's own clean-up. | |
| */ | |
| tst->inject.err_code = FW_UPLOAD_ERR_NONE; | |
| tst->inject.prog = NULL; | |
| return ret; | |
| } | |
| static enum fw_upload_err test_fw_upload_write(struct fw_upload *fwl, | |
| const u8 *data, u32 offset, | |
| u32 size, u32 *written) | |
| { | |
| struct test_firmware_upload *tst = fwl->dd_handle; | |
| const char *progress = "transferring:"; | |
| u32 blk_size; | |
| if (tst->cancel_request) | |
| return FW_UPLOAD_ERR_CANCELED; | |
| blk_size = min_t(u32, TEST_UPLOAD_BLK_SIZE, size); | |
| memcpy(tst->buf + offset, data + offset, blk_size); | |
| *written = blk_size; | |
| if (tst->inject.err_code == FW_UPLOAD_ERR_NONE || | |
| strncmp(tst->inject.prog, progress, strlen(progress)) != 0) | |
| return FW_UPLOAD_ERR_NONE; | |
| if (tst->inject.err_code == FW_UPLOAD_ERR_CANCELED) | |
| return fw_upload_wait_on_cancel(tst); | |
| return tst->inject.err_code; | |
| } | |
| static enum fw_upload_err test_fw_upload_complete(struct fw_upload *fwl) | |
| { | |
| struct test_firmware_upload *tst = fwl->dd_handle; | |
| const char *progress = "programming:"; | |
| if (tst->cancel_request) | |
| return FW_UPLOAD_ERR_CANCELED; | |
| if (tst->inject.err_code == FW_UPLOAD_ERR_NONE || | |
| strncmp(tst->inject.prog, progress, strlen(progress)) != 0) | |
| return FW_UPLOAD_ERR_NONE; | |
| if (tst->inject.err_code == FW_UPLOAD_ERR_CANCELED) | |
| return fw_upload_wait_on_cancel(tst); | |
| return tst->inject.err_code; | |
| } | |
| static void test_fw_upload_cancel(struct fw_upload *fwl) | |
| { | |
| struct test_firmware_upload *tst = fwl->dd_handle; | |
| tst->cancel_request = true; | |
| } | |
| static void test_fw_cleanup(struct fw_upload *fwl) | |
| { | |
| struct test_firmware_upload *tst = fwl->dd_handle; | |
| tst->inject.err_code = FW_UPLOAD_ERR_NONE; | |
| tst->inject.prog = NULL; | |
| } | |
| static const struct fw_upload_ops upload_test_ops = { | |
| .prepare = test_fw_upload_prepare, | |
| .write = test_fw_upload_write, | |
| .poll_complete = test_fw_upload_complete, | |
| .cancel = test_fw_upload_cancel, | |
| .cleanup = test_fw_cleanup | |
| }; | |
| static ssize_t upload_register_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct test_firmware_upload *tst; | |
| struct fw_upload *fwl; | |
| char *name; | |
| int ret; | |
| name = kstrndup(buf, count, GFP_KERNEL); | |
| if (!name) | |
| return -ENOMEM; | |
| mutex_lock(&test_fw_mutex); | |
| tst = upload_lookup_name(name); | |
| if (tst) { | |
| ret = -EEXIST; | |
| goto free_name; | |
| } | |
| tst = kzalloc(sizeof(*tst), GFP_KERNEL); | |
| if (!tst) { | |
| ret = -ENOMEM; | |
| goto free_name; | |
| } | |
| tst->name = name; | |
| tst->buf = kzalloc(TEST_UPLOAD_MAX_SIZE, GFP_KERNEL); | |
| if (!tst->buf) { | |
| ret = -ENOMEM; | |
| goto free_tst; | |
| } | |
| fwl = firmware_upload_register(THIS_MODULE, dev, tst->name, | |
| &upload_test_ops, tst); | |
| if (IS_ERR(fwl)) { | |
| ret = PTR_ERR(fwl); | |
| goto free_buf; | |
| } | |
| tst->fwl = fwl; | |
| list_add_tail(&tst->node, &test_upload_list); | |
| mutex_unlock(&test_fw_mutex); | |
| return count; | |
| free_buf: | |
| kfree(tst->buf); | |
| free_tst: | |
| kfree(tst); | |
| free_name: | |
| mutex_unlock(&test_fw_mutex); | |
| kfree(name); | |
| return ret; | |
| } | |
| static DEVICE_ATTR_WO(upload_register); | |
| static ssize_t upload_unregister_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct test_firmware_upload *tst; | |
| int ret = count; | |
| mutex_lock(&test_fw_mutex); | |
| tst = upload_lookup_name(buf); | |
| if (!tst) { | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| if (test_fw_config->upload_name == tst->name) | |
| test_fw_config->upload_name = NULL; | |
| list_del(&tst->node); | |
| upload_release(tst); | |
| out: | |
| mutex_unlock(&test_fw_mutex); | |
| return ret; | |
| } | |
| static DEVICE_ATTR_WO(upload_unregister); | |
| static ssize_t test_result_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| return test_dev_config_show_int(buf, test_fw_config->test_result); | |
| } | |
| static DEVICE_ATTR_RO(test_result); | |
| static ssize_t release_all_firmware_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| test_release_all_firmware(); | |
| return count; | |
| } | |
| static DEVICE_ATTR_WO(release_all_firmware); | |
| static ssize_t read_firmware_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct test_batched_req *req; | |
| u8 idx; | |
| ssize_t rc = 0; | |
| mutex_lock(&test_fw_mutex); | |
| idx = test_fw_config->read_fw_idx; | |
| if (idx >= test_fw_config->num_requests) { | |
| rc = -ERANGE; | |
| goto out; | |
| } | |
| if (!test_fw_config->reqs) { | |
| rc = -EINVAL; | |
| goto out; | |
| } | |
| req = &test_fw_config->reqs[idx]; | |
| if (!req->fw) { | |
| pr_err("#%u: failed to async load firmware\n", idx); | |
| rc = -ENOENT; | |
| goto out; | |
| } | |
| pr_info("#%u: loaded %zu\n", idx, req->fw->size); | |
| if (req->fw->size > PAGE_SIZE) { | |
| pr_err("Testing interface must use PAGE_SIZE firmware for now\n"); | |
| rc = -EINVAL; | |
| goto out; | |
| } | |
| memcpy(buf, req->fw->data, req->fw->size); | |
| rc = req->fw->size; | |
| out: | |
| mutex_unlock(&test_fw_mutex); | |
| return rc; | |
| } | |
| static DEVICE_ATTR_RO(read_firmware); | |
| static ssize_t upload_read_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct test_firmware_upload *tst = NULL; | |
| struct test_firmware_upload *tst_iter; | |
| int ret = -EINVAL; | |
| if (!test_fw_config->upload_name) { | |
| pr_err("Set config_upload_name before using upload_read\n"); | |
| return -EINVAL; | |
| } | |
| mutex_lock(&test_fw_mutex); | |
| list_for_each_entry(tst_iter, &test_upload_list, node) | |
| if (tst_iter->name == test_fw_config->upload_name) { | |
| tst = tst_iter; | |
| break; | |
| } | |
| if (!tst) { | |
| pr_err("Firmware name not found: %s\n", | |
| test_fw_config->upload_name); | |
| goto out; | |
| } | |
| if (tst->size > PAGE_SIZE) { | |
| pr_err("Testing interface must use PAGE_SIZE firmware for now\n"); | |
| goto out; | |
| } | |
| memcpy(buf, tst->buf, tst->size); | |
| ret = tst->size; | |
| out: | |
| mutex_unlock(&test_fw_mutex); | |
| return ret; | |
| } | |
| static DEVICE_ATTR_RO(upload_read); | |
| #define TEST_FW_DEV_ATTR(name) &dev_attr_##name.attr | |
| static struct attribute *test_dev_attrs[] = { | |
| TEST_FW_DEV_ATTR(reset), | |
| TEST_FW_DEV_ATTR(config), | |
| TEST_FW_DEV_ATTR(config_name), | |
| TEST_FW_DEV_ATTR(config_num_requests), | |
| TEST_FW_DEV_ATTR(config_into_buf), | |
| TEST_FW_DEV_ATTR(config_buf_size), | |
| TEST_FW_DEV_ATTR(config_file_offset), | |
| TEST_FW_DEV_ATTR(config_partial), | |
| TEST_FW_DEV_ATTR(config_sync_direct), | |
| TEST_FW_DEV_ATTR(config_send_uevent), | |
| TEST_FW_DEV_ATTR(config_read_fw_idx), | |
| TEST_FW_DEV_ATTR(config_upload_name), | |
| /* These don't use the config at all - they could be ported! */ | |
| TEST_FW_DEV_ATTR(trigger_request), | |
| TEST_FW_DEV_ATTR(trigger_async_request), | |
| TEST_FW_DEV_ATTR(trigger_custom_fallback), | |
| #ifdef CONFIG_EFI_EMBEDDED_FIRMWARE | |
| TEST_FW_DEV_ATTR(trigger_request_platform), | |
| #endif | |
| /* These use the config and can use the test_result */ | |
| TEST_FW_DEV_ATTR(trigger_batched_requests), | |
| TEST_FW_DEV_ATTR(trigger_batched_requests_async), | |
| TEST_FW_DEV_ATTR(release_all_firmware), | |
| TEST_FW_DEV_ATTR(test_result), | |
| TEST_FW_DEV_ATTR(read_firmware), | |
| TEST_FW_DEV_ATTR(upload_read), | |
| TEST_FW_DEV_ATTR(upload_register), | |
| TEST_FW_DEV_ATTR(upload_unregister), | |
| NULL, | |
| }; | |
| ATTRIBUTE_GROUPS(test_dev); | |
| static struct miscdevice test_fw_misc_device = { | |
| .minor = MISC_DYNAMIC_MINOR, | |
| .name = "test_firmware", | |
| .fops = &test_fw_fops, | |
| .groups = test_dev_groups, | |
| }; | |
| static int __init test_firmware_init(void) | |
| { | |
| int rc; | |
| test_fw_config = kzalloc(sizeof(struct test_config), GFP_KERNEL); | |
| if (!test_fw_config) | |
| return -ENOMEM; | |
| rc = __test_firmware_config_init(); | |
| if (rc) { | |
| kfree(test_fw_config); | |
| pr_err("could not init firmware test config: %d\n", rc); | |
| return rc; | |
| } | |
| rc = misc_register(&test_fw_misc_device); | |
| if (rc) { | |
| __test_firmware_config_free(); | |
| kfree(test_fw_config); | |
| pr_err("could not register misc device: %d\n", rc); | |
| return rc; | |
| } | |
| pr_warn("interface ready\n"); | |
| return 0; | |
| } | |
| module_init(test_firmware_init); | |
| static void __exit test_firmware_exit(void) | |
| { | |
| mutex_lock(&test_fw_mutex); | |
| release_firmware(test_firmware); | |
| misc_deregister(&test_fw_misc_device); | |
| upload_release_all(); | |
| __test_firmware_config_free(); | |
| kfree(test_fw_config); | |
| mutex_unlock(&test_fw_mutex); | |
| pr_warn("removed interface\n"); | |
| } | |
| module_exit(test_firmware_exit); | |
| MODULE_AUTHOR("Kees Cook <keescook@chromium.org>"); | |
| MODULE_LICENSE("GPL"); |