| // SPDX-License-Identifier: GPL-1.0+ | 
 | /* | 
 |  * zcore module to export memory content and register sets for creating system | 
 |  * dumps on SCSI/NVMe disks (zfcp/nvme dump). | 
 |  * | 
 |  * For more information please refer to Documentation/s390/zfcpdump.rst | 
 |  * | 
 |  * Copyright IBM Corp. 2003, 2008 | 
 |  * Author(s): Michael Holzheu | 
 |  */ | 
 |  | 
 | #define KMSG_COMPONENT "zdump" | 
 | #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt | 
 |  | 
 | #include <linux/init.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/debugfs.h> | 
 |  | 
 | #include <asm/asm-offsets.h> | 
 | #include <asm/ipl.h> | 
 | #include <asm/sclp.h> | 
 | #include <asm/setup.h> | 
 | #include <linux/uaccess.h> | 
 | #include <asm/debug.h> | 
 | #include <asm/processor.h> | 
 | #include <asm/irqflags.h> | 
 | #include <asm/checksum.h> | 
 | #include <asm/os_info.h> | 
 | #include <asm/switch_to.h> | 
 | #include "sclp.h" | 
 |  | 
 | #define TRACE(x...) debug_sprintf_event(zcore_dbf, 1, x) | 
 |  | 
 | enum arch_id { | 
 | 	ARCH_S390	= 0, | 
 | 	ARCH_S390X	= 1, | 
 | }; | 
 |  | 
 | struct ipib_info { | 
 | 	unsigned long	ipib; | 
 | 	u32		checksum; | 
 | }  __attribute__((packed)); | 
 |  | 
 | static struct debug_info *zcore_dbf; | 
 | static int hsa_available; | 
 | static struct dentry *zcore_dir; | 
 | static struct dentry *zcore_reipl_file; | 
 | static struct dentry *zcore_hsa_file; | 
 | static struct ipl_parameter_block *zcore_ipl_block; | 
 |  | 
 | static DEFINE_MUTEX(hsa_buf_mutex); | 
 | static char hsa_buf[PAGE_SIZE] __aligned(PAGE_SIZE); | 
 |  | 
 | /* | 
 |  * Copy memory from HSA to user memory (not reentrant): | 
 |  * | 
 |  * @dest:  User buffer where memory should be copied to | 
 |  * @src:   Start address within HSA where data should be copied | 
 |  * @count: Size of buffer, which should be copied | 
 |  */ | 
 | int memcpy_hsa_user(void __user *dest, unsigned long src, size_t count) | 
 | { | 
 | 	unsigned long offset, bytes; | 
 |  | 
 | 	if (!hsa_available) | 
 | 		return -ENODATA; | 
 |  | 
 | 	mutex_lock(&hsa_buf_mutex); | 
 | 	while (count) { | 
 | 		if (sclp_sdias_copy(hsa_buf, src / PAGE_SIZE + 2, 1)) { | 
 | 			TRACE("sclp_sdias_copy() failed\n"); | 
 | 			mutex_unlock(&hsa_buf_mutex); | 
 | 			return -EIO; | 
 | 		} | 
 | 		offset = src % PAGE_SIZE; | 
 | 		bytes = min(PAGE_SIZE - offset, count); | 
 | 		if (copy_to_user(dest, hsa_buf + offset, bytes)) { | 
 | 			mutex_unlock(&hsa_buf_mutex); | 
 | 			return -EFAULT; | 
 | 		} | 
 | 		src += bytes; | 
 | 		dest += bytes; | 
 | 		count -= bytes; | 
 | 	} | 
 | 	mutex_unlock(&hsa_buf_mutex); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Copy memory from HSA to kernel memory (not reentrant): | 
 |  * | 
 |  * @dest:  Kernel or user buffer where memory should be copied to | 
 |  * @src:   Start address within HSA where data should be copied | 
 |  * @count: Size of buffer, which should be copied | 
 |  */ | 
 | int memcpy_hsa_kernel(void *dest, unsigned long src, size_t count) | 
 | { | 
 | 	unsigned long offset, bytes; | 
 |  | 
 | 	if (!hsa_available) | 
 | 		return -ENODATA; | 
 |  | 
 | 	mutex_lock(&hsa_buf_mutex); | 
 | 	while (count) { | 
 | 		if (sclp_sdias_copy(hsa_buf, src / PAGE_SIZE + 2, 1)) { | 
 | 			TRACE("sclp_sdias_copy() failed\n"); | 
 | 			mutex_unlock(&hsa_buf_mutex); | 
 | 			return -EIO; | 
 | 		} | 
 | 		offset = src % PAGE_SIZE; | 
 | 		bytes = min(PAGE_SIZE - offset, count); | 
 | 		memcpy(dest, hsa_buf + offset, bytes); | 
 | 		src += bytes; | 
 | 		dest += bytes; | 
 | 		count -= bytes; | 
 | 	} | 
 | 	mutex_unlock(&hsa_buf_mutex); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int __init init_cpu_info(void) | 
 | { | 
 | 	struct save_area *sa; | 
 |  | 
 | 	/* get info for boot cpu from lowcore, stored in the HSA */ | 
 | 	sa = save_area_boot_cpu(); | 
 | 	if (!sa) | 
 | 		return -ENOMEM; | 
 | 	if (memcpy_hsa_kernel(hsa_buf, __LC_FPREGS_SAVE_AREA, 512) < 0) { | 
 | 		TRACE("could not copy from HSA\n"); | 
 | 		return -EIO; | 
 | 	} | 
 | 	save_area_add_regs(sa, hsa_buf); /* vx registers are saved in smp.c */ | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Release the HSA | 
 |  */ | 
 | static void release_hsa(void) | 
 | { | 
 | 	diag308(DIAG308_REL_HSA, NULL); | 
 | 	hsa_available = 0; | 
 | } | 
 |  | 
 | static ssize_t zcore_reipl_write(struct file *filp, const char __user *buf, | 
 | 				 size_t count, loff_t *ppos) | 
 | { | 
 | 	if (zcore_ipl_block) { | 
 | 		diag308(DIAG308_SET, zcore_ipl_block); | 
 | 		diag308(DIAG308_LOAD_CLEAR, NULL); | 
 | 	} | 
 | 	return count; | 
 | } | 
 |  | 
 | static int zcore_reipl_open(struct inode *inode, struct file *filp) | 
 | { | 
 | 	return stream_open(inode, filp); | 
 | } | 
 |  | 
 | static int zcore_reipl_release(struct inode *inode, struct file *filp) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct file_operations zcore_reipl_fops = { | 
 | 	.owner		= THIS_MODULE, | 
 | 	.write		= zcore_reipl_write, | 
 | 	.open		= zcore_reipl_open, | 
 | 	.release	= zcore_reipl_release, | 
 | 	.llseek		= no_llseek, | 
 | }; | 
 |  | 
 | static ssize_t zcore_hsa_read(struct file *filp, char __user *buf, | 
 | 			      size_t count, loff_t *ppos) | 
 | { | 
 | 	static char str[18]; | 
 |  | 
 | 	if (hsa_available) | 
 | 		snprintf(str, sizeof(str), "%lx\n", sclp.hsa_size); | 
 | 	else | 
 | 		snprintf(str, sizeof(str), "0\n"); | 
 | 	return simple_read_from_buffer(buf, count, ppos, str, strlen(str)); | 
 | } | 
 |  | 
 | static ssize_t zcore_hsa_write(struct file *filp, const char __user *buf, | 
 | 			       size_t count, loff_t *ppos) | 
 | { | 
 | 	char value; | 
 |  | 
 | 	if (*ppos != 0) | 
 | 		return -EPIPE; | 
 | 	if (copy_from_user(&value, buf, 1)) | 
 | 		return -EFAULT; | 
 | 	if (value != '0') | 
 | 		return -EINVAL; | 
 | 	release_hsa(); | 
 | 	return count; | 
 | } | 
 |  | 
 | static const struct file_operations zcore_hsa_fops = { | 
 | 	.owner		= THIS_MODULE, | 
 | 	.write		= zcore_hsa_write, | 
 | 	.read		= zcore_hsa_read, | 
 | 	.open		= nonseekable_open, | 
 | 	.llseek		= no_llseek, | 
 | }; | 
 |  | 
 | static int __init check_sdias(void) | 
 | { | 
 | 	if (!sclp.hsa_size) { | 
 | 		TRACE("Could not determine HSA size\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Provide IPL parameter information block from either HSA or memory | 
 |  * for future reipl | 
 |  */ | 
 | static int __init zcore_reipl_init(void) | 
 | { | 
 | 	struct ipib_info ipib_info; | 
 | 	int rc; | 
 |  | 
 | 	rc = memcpy_hsa_kernel(&ipib_info, __LC_DUMP_REIPL, sizeof(ipib_info)); | 
 | 	if (rc) | 
 | 		return rc; | 
 | 	if (ipib_info.ipib == 0) | 
 | 		return 0; | 
 | 	zcore_ipl_block = (void *) __get_free_page(GFP_KERNEL); | 
 | 	if (!zcore_ipl_block) | 
 | 		return -ENOMEM; | 
 | 	if (ipib_info.ipib < sclp.hsa_size) | 
 | 		rc = memcpy_hsa_kernel(zcore_ipl_block, ipib_info.ipib, | 
 | 				       PAGE_SIZE); | 
 | 	else | 
 | 		rc = memcpy_real(zcore_ipl_block, (void *) ipib_info.ipib, | 
 | 				 PAGE_SIZE); | 
 | 	if (rc || (__force u32)csum_partial(zcore_ipl_block, zcore_ipl_block->hdr.len, 0) != | 
 | 	    ipib_info.checksum) { | 
 | 		TRACE("Checksum does not match\n"); | 
 | 		free_page((unsigned long) zcore_ipl_block); | 
 | 		zcore_ipl_block = NULL; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int __init zcore_init(void) | 
 | { | 
 | 	unsigned char arch; | 
 | 	int rc; | 
 |  | 
 | 	if (!is_ipl_type_dump()) | 
 | 		return -ENODATA; | 
 | 	if (OLDMEM_BASE) | 
 | 		return -ENODATA; | 
 |  | 
 | 	zcore_dbf = debug_register("zcore", 4, 1, 4 * sizeof(long)); | 
 | 	debug_register_view(zcore_dbf, &debug_sprintf_view); | 
 | 	debug_set_level(zcore_dbf, 6); | 
 |  | 
 | 	if (ipl_info.type == IPL_TYPE_FCP_DUMP) { | 
 | 		TRACE("type:   fcp\n"); | 
 | 		TRACE("devno:  %x\n", ipl_info.data.fcp.dev_id.devno); | 
 | 		TRACE("wwpn:   %llx\n", (unsigned long long) ipl_info.data.fcp.wwpn); | 
 | 		TRACE("lun:    %llx\n", (unsigned long long) ipl_info.data.fcp.lun); | 
 | 	} else if (ipl_info.type == IPL_TYPE_NVME_DUMP) { | 
 | 		TRACE("type:   nvme\n"); | 
 | 		TRACE("fid:    %x\n", ipl_info.data.nvme.fid); | 
 | 		TRACE("nsid:   %x\n", ipl_info.data.nvme.nsid); | 
 | 	} | 
 |  | 
 | 	rc = sclp_sdias_init(); | 
 | 	if (rc) | 
 | 		goto fail; | 
 |  | 
 | 	rc = check_sdias(); | 
 | 	if (rc) | 
 | 		goto fail; | 
 | 	hsa_available = 1; | 
 |  | 
 | 	rc = memcpy_hsa_kernel(&arch, __LC_AR_MODE_ID, 1); | 
 | 	if (rc) | 
 | 		goto fail; | 
 |  | 
 | 	if (arch == ARCH_S390) { | 
 | 		pr_alert("The 64-bit dump tool cannot be used for a " | 
 | 			 "32-bit system\n"); | 
 | 		rc = -EINVAL; | 
 | 		goto fail; | 
 | 	} | 
 |  | 
 | 	pr_alert("The dump process started for a 64-bit operating system\n"); | 
 | 	rc = init_cpu_info(); | 
 | 	if (rc) | 
 | 		goto fail; | 
 |  | 
 | 	rc = zcore_reipl_init(); | 
 | 	if (rc) | 
 | 		goto fail; | 
 |  | 
 | 	zcore_dir = debugfs_create_dir("zcore" , NULL); | 
 | 	if (!zcore_dir) { | 
 | 		rc = -ENOMEM; | 
 | 		goto fail; | 
 | 	} | 
 | 	zcore_reipl_file = debugfs_create_file("reipl", S_IRUSR, zcore_dir, | 
 | 						NULL, &zcore_reipl_fops); | 
 | 	if (!zcore_reipl_file) { | 
 | 		rc = -ENOMEM; | 
 | 		goto fail_dir; | 
 | 	} | 
 | 	zcore_hsa_file = debugfs_create_file("hsa", S_IRUSR|S_IWUSR, zcore_dir, | 
 | 					     NULL, &zcore_hsa_fops); | 
 | 	if (!zcore_hsa_file) { | 
 | 		rc = -ENOMEM; | 
 | 		goto fail_reipl_file; | 
 | 	} | 
 | 	return 0; | 
 |  | 
 | fail_reipl_file: | 
 | 	debugfs_remove(zcore_reipl_file); | 
 | fail_dir: | 
 | 	debugfs_remove(zcore_dir); | 
 | fail: | 
 | 	diag308(DIAG308_REL_HSA, NULL); | 
 | 	return rc; | 
 | } | 
 | subsys_initcall(zcore_init); |