| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * BlueZ - Bluetooth protocol stack for Linux | |
| * | |
| * Copyright (C) 2021 Intel Corporation | |
| * Copyright 2023 NXP | |
| */ | |
| #include <linux/property.h> | |
| #include <net/bluetooth/bluetooth.h> | |
| #include <net/bluetooth/hci_core.h> | |
| #include <net/bluetooth/mgmt.h> | |
| #include "hci_request.h" | |
| #include "hci_codec.h" | |
| #include "hci_debugfs.h" | |
| #include "smp.h" | |
| #include "eir.h" | |
| #include "msft.h" | |
| #include "aosp.h" | |
| #include "leds.h" | |
| static void hci_cmd_sync_complete(struct hci_dev *hdev, u8 result, u16 opcode, | |
| struct sk_buff *skb) | |
| { | |
| bt_dev_dbg(hdev, "result 0x%2.2x", result); | |
| if (hdev->req_status != HCI_REQ_PEND) | |
| return; | |
| hdev->req_result = result; | |
| hdev->req_status = HCI_REQ_DONE; | |
| /* Free the request command so it is not used as response */ | |
| kfree_skb(hdev->req_skb); | |
| hdev->req_skb = NULL; | |
| if (skb) { | |
| struct sock *sk = hci_skb_sk(skb); | |
| /* Drop sk reference if set */ | |
| if (sk) | |
| sock_put(sk); | |
| hdev->req_rsp = skb_get(skb); | |
| } | |
| wake_up_interruptible(&hdev->req_wait_q); | |
| } | |
| static struct sk_buff *hci_cmd_sync_alloc(struct hci_dev *hdev, u16 opcode, | |
| u32 plen, const void *param, | |
| struct sock *sk) | |
| { | |
| int len = HCI_COMMAND_HDR_SIZE + plen; | |
| struct hci_command_hdr *hdr; | |
| struct sk_buff *skb; | |
| skb = bt_skb_alloc(len, GFP_ATOMIC); | |
| if (!skb) | |
| return NULL; | |
| hdr = skb_put(skb, HCI_COMMAND_HDR_SIZE); | |
| hdr->opcode = cpu_to_le16(opcode); | |
| hdr->plen = plen; | |
| if (plen) | |
| skb_put_data(skb, param, plen); | |
| bt_dev_dbg(hdev, "skb len %d", skb->len); | |
| hci_skb_pkt_type(skb) = HCI_COMMAND_PKT; | |
| hci_skb_opcode(skb) = opcode; | |
| /* Grab a reference if command needs to be associated with a sock (e.g. | |
| * likely mgmt socket that initiated the command). | |
| */ | |
| if (sk) { | |
| hci_skb_sk(skb) = sk; | |
| sock_hold(sk); | |
| } | |
| return skb; | |
| } | |
| static void hci_cmd_sync_add(struct hci_request *req, u16 opcode, u32 plen, | |
| const void *param, u8 event, struct sock *sk) | |
| { | |
| struct hci_dev *hdev = req->hdev; | |
| struct sk_buff *skb; | |
| bt_dev_dbg(hdev, "opcode 0x%4.4x plen %d", opcode, plen); | |
| /* If an error occurred during request building, there is no point in | |
| * queueing the HCI command. We can simply return. | |
| */ | |
| if (req->err) | |
| return; | |
| skb = hci_cmd_sync_alloc(hdev, opcode, plen, param, sk); | |
| if (!skb) { | |
| bt_dev_err(hdev, "no memory for command (opcode 0x%4.4x)", | |
| opcode); | |
| req->err = -ENOMEM; | |
| return; | |
| } | |
| if (skb_queue_empty(&req->cmd_q)) | |
| bt_cb(skb)->hci.req_flags |= HCI_REQ_START; | |
| hci_skb_event(skb) = event; | |
| skb_queue_tail(&req->cmd_q, skb); | |
| } | |
| static int hci_req_sync_run(struct hci_request *req) | |
| { | |
| struct hci_dev *hdev = req->hdev; | |
| struct sk_buff *skb; | |
| unsigned long flags; | |
| bt_dev_dbg(hdev, "length %u", skb_queue_len(&req->cmd_q)); | |
| /* If an error occurred during request building, remove all HCI | |
| * commands queued on the HCI request queue. | |
| */ | |
| if (req->err) { | |
| skb_queue_purge(&req->cmd_q); | |
| return req->err; | |
| } | |
| /* Do not allow empty requests */ | |
| if (skb_queue_empty(&req->cmd_q)) | |
| return -ENODATA; | |
| skb = skb_peek_tail(&req->cmd_q); | |
| bt_cb(skb)->hci.req_complete_skb = hci_cmd_sync_complete; | |
| bt_cb(skb)->hci.req_flags |= HCI_REQ_SKB; | |
| spin_lock_irqsave(&hdev->cmd_q.lock, flags); | |
| skb_queue_splice_tail(&req->cmd_q, &hdev->cmd_q); | |
| spin_unlock_irqrestore(&hdev->cmd_q.lock, flags); | |
| queue_work(hdev->workqueue, &hdev->cmd_work); | |
| return 0; | |
| } | |
| /* This function requires the caller holds hdev->req_lock. */ | |
| struct sk_buff *__hci_cmd_sync_sk(struct hci_dev *hdev, u16 opcode, u32 plen, | |
| const void *param, u8 event, u32 timeout, | |
| struct sock *sk) | |
| { | |
| struct hci_request req; | |
| struct sk_buff *skb; | |
| int err = 0; | |
| bt_dev_dbg(hdev, "Opcode 0x%4.4x", opcode); | |
| hci_req_init(&req, hdev); | |
| hci_cmd_sync_add(&req, opcode, plen, param, event, sk); | |
| hdev->req_status = HCI_REQ_PEND; | |
| err = hci_req_sync_run(&req); | |
| if (err < 0) | |
| return ERR_PTR(err); | |
| err = wait_event_interruptible_timeout(hdev->req_wait_q, | |
| hdev->req_status != HCI_REQ_PEND, | |
| timeout); | |
| if (err == -ERESTARTSYS) | |
| return ERR_PTR(-EINTR); | |
| switch (hdev->req_status) { | |
| case HCI_REQ_DONE: | |
| err = -bt_to_errno(hdev->req_result); | |
| break; | |
| case HCI_REQ_CANCELED: | |
| err = -hdev->req_result; | |
| break; | |
| default: | |
| err = -ETIMEDOUT; | |
| break; | |
| } | |
| hdev->req_status = 0; | |
| hdev->req_result = 0; | |
| skb = hdev->req_rsp; | |
| hdev->req_rsp = NULL; | |
| bt_dev_dbg(hdev, "end: err %d", err); | |
| if (err < 0) { | |
| kfree_skb(skb); | |
| return ERR_PTR(err); | |
| } | |
| /* If command return a status event skb will be set to NULL as there are | |
| * no parameters. | |
| */ | |
| if (!skb) | |
| return ERR_PTR(-ENODATA); | |
| return skb; | |
| } | |
| EXPORT_SYMBOL(__hci_cmd_sync_sk); | |
| /* This function requires the caller holds hdev->req_lock. */ | |
| struct sk_buff *__hci_cmd_sync(struct hci_dev *hdev, u16 opcode, u32 plen, | |
| const void *param, u32 timeout) | |
| { | |
| return __hci_cmd_sync_sk(hdev, opcode, plen, param, 0, timeout, NULL); | |
| } | |
| EXPORT_SYMBOL(__hci_cmd_sync); | |
| /* Send HCI command and wait for command complete event */ | |
| struct sk_buff *hci_cmd_sync(struct hci_dev *hdev, u16 opcode, u32 plen, | |
| const void *param, u32 timeout) | |
| { | |
| struct sk_buff *skb; | |
| if (!test_bit(HCI_UP, &hdev->flags)) | |
| return ERR_PTR(-ENETDOWN); | |
| bt_dev_dbg(hdev, "opcode 0x%4.4x plen %d", opcode, plen); | |
| hci_req_sync_lock(hdev); | |
| skb = __hci_cmd_sync(hdev, opcode, plen, param, timeout); | |
| hci_req_sync_unlock(hdev); | |
| return skb; | |
| } | |
| EXPORT_SYMBOL(hci_cmd_sync); | |
| /* This function requires the caller holds hdev->req_lock. */ | |
| struct sk_buff *__hci_cmd_sync_ev(struct hci_dev *hdev, u16 opcode, u32 plen, | |
| const void *param, u8 event, u32 timeout) | |
| { | |
| return __hci_cmd_sync_sk(hdev, opcode, plen, param, event, timeout, | |
| NULL); | |
| } | |
| EXPORT_SYMBOL(__hci_cmd_sync_ev); | |
| /* This function requires the caller holds hdev->req_lock. */ | |
| int __hci_cmd_sync_status_sk(struct hci_dev *hdev, u16 opcode, u32 plen, | |
| const void *param, u8 event, u32 timeout, | |
| struct sock *sk) | |
| { | |
| struct sk_buff *skb; | |
| u8 status; | |
| skb = __hci_cmd_sync_sk(hdev, opcode, plen, param, event, timeout, sk); | |
| /* If command return a status event, skb will be set to -ENODATA */ | |
| if (skb == ERR_PTR(-ENODATA)) | |
| return 0; | |
| if (IS_ERR(skb)) { | |
| if (!event) | |
| bt_dev_err(hdev, "Opcode 0x%4.4x failed: %ld", opcode, | |
| PTR_ERR(skb)); | |
| return PTR_ERR(skb); | |
| } | |
| status = skb->data[0]; | |
| kfree_skb(skb); | |
| return status; | |
| } | |
| EXPORT_SYMBOL(__hci_cmd_sync_status_sk); | |
| int __hci_cmd_sync_status(struct hci_dev *hdev, u16 opcode, u32 plen, | |
| const void *param, u32 timeout) | |
| { | |
| return __hci_cmd_sync_status_sk(hdev, opcode, plen, param, 0, timeout, | |
| NULL); | |
| } | |
| EXPORT_SYMBOL(__hci_cmd_sync_status); | |
| int hci_cmd_sync_status(struct hci_dev *hdev, u16 opcode, u32 plen, | |
| const void *param, u32 timeout) | |
| { | |
| int err; | |
| hci_req_sync_lock(hdev); | |
| err = __hci_cmd_sync_status(hdev, opcode, plen, param, timeout); | |
| hci_req_sync_unlock(hdev); | |
| return err; | |
| } | |
| EXPORT_SYMBOL(hci_cmd_sync_status); | |
| static void hci_cmd_sync_work(struct work_struct *work) | |
| { | |
| struct hci_dev *hdev = container_of(work, struct hci_dev, cmd_sync_work); | |
| bt_dev_dbg(hdev, ""); | |
| /* Dequeue all entries and run them */ | |
| while (1) { | |
| struct hci_cmd_sync_work_entry *entry; | |
| mutex_lock(&hdev->cmd_sync_work_lock); | |
| entry = list_first_entry_or_null(&hdev->cmd_sync_work_list, | |
| struct hci_cmd_sync_work_entry, | |
| list); | |
| if (entry) | |
| list_del(&entry->list); | |
| mutex_unlock(&hdev->cmd_sync_work_lock); | |
| if (!entry) | |
| break; | |
| bt_dev_dbg(hdev, "entry %p", entry); | |
| if (entry->func) { | |
| int err; | |
| hci_req_sync_lock(hdev); | |
| err = entry->func(hdev, entry->data); | |
| if (entry->destroy) | |
| entry->destroy(hdev, entry->data, err); | |
| hci_req_sync_unlock(hdev); | |
| } | |
| kfree(entry); | |
| } | |
| } | |
| static void hci_cmd_sync_cancel_work(struct work_struct *work) | |
| { | |
| struct hci_dev *hdev = container_of(work, struct hci_dev, cmd_sync_cancel_work); | |
| cancel_delayed_work_sync(&hdev->cmd_timer); | |
| cancel_delayed_work_sync(&hdev->ncmd_timer); | |
| atomic_set(&hdev->cmd_cnt, 1); | |
| wake_up_interruptible(&hdev->req_wait_q); | |
| } | |
| static int hci_scan_disable_sync(struct hci_dev *hdev); | |
| static int scan_disable_sync(struct hci_dev *hdev, void *data) | |
| { | |
| return hci_scan_disable_sync(hdev); | |
| } | |
| static int hci_inquiry_sync(struct hci_dev *hdev, u8 length); | |
| static int interleaved_inquiry_sync(struct hci_dev *hdev, void *data) | |
| { | |
| return hci_inquiry_sync(hdev, DISCOV_INTERLEAVED_INQUIRY_LEN); | |
| } | |
| static void le_scan_disable(struct work_struct *work) | |
| { | |
| struct hci_dev *hdev = container_of(work, struct hci_dev, | |
| le_scan_disable.work); | |
| int status; | |
| bt_dev_dbg(hdev, ""); | |
| hci_dev_lock(hdev); | |
| if (!hci_dev_test_flag(hdev, HCI_LE_SCAN)) | |
| goto _return; | |
| cancel_delayed_work(&hdev->le_scan_restart); | |
| status = hci_cmd_sync_queue(hdev, scan_disable_sync, NULL, NULL); | |
| if (status) { | |
| bt_dev_err(hdev, "failed to disable LE scan: %d", status); | |
| goto _return; | |
| } | |
| hdev->discovery.scan_start = 0; | |
| /* If we were running LE only scan, change discovery state. If | |
| * we were running both LE and BR/EDR inquiry simultaneously, | |
| * and BR/EDR inquiry is already finished, stop discovery, | |
| * otherwise BR/EDR inquiry will stop discovery when finished. | |
| * If we will resolve remote device name, do not change | |
| * discovery state. | |
| */ | |
| if (hdev->discovery.type == DISCOV_TYPE_LE) | |
| goto discov_stopped; | |
| if (hdev->discovery.type != DISCOV_TYPE_INTERLEAVED) | |
| goto _return; | |
| if (test_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks)) { | |
| if (!test_bit(HCI_INQUIRY, &hdev->flags) && | |
| hdev->discovery.state != DISCOVERY_RESOLVING) | |
| goto discov_stopped; | |
| goto _return; | |
| } | |
| status = hci_cmd_sync_queue(hdev, interleaved_inquiry_sync, NULL, NULL); | |
| if (status) { | |
| bt_dev_err(hdev, "inquiry failed: status %d", status); | |
| goto discov_stopped; | |
| } | |
| goto _return; | |
| discov_stopped: | |
| hci_discovery_set_state(hdev, DISCOVERY_STOPPED); | |
| _return: | |
| hci_dev_unlock(hdev); | |
| } | |
| static int hci_le_set_scan_enable_sync(struct hci_dev *hdev, u8 val, | |
| u8 filter_dup); | |
| static int hci_le_scan_restart_sync(struct hci_dev *hdev) | |
| { | |
| /* If controller is not scanning we are done. */ | |
| if (!hci_dev_test_flag(hdev, HCI_LE_SCAN)) | |
| return 0; | |
| if (hdev->scanning_paused) { | |
| bt_dev_dbg(hdev, "Scanning is paused for suspend"); | |
| return 0; | |
| } | |
| hci_le_set_scan_enable_sync(hdev, LE_SCAN_DISABLE, 0x00); | |
| return hci_le_set_scan_enable_sync(hdev, LE_SCAN_ENABLE, | |
| LE_SCAN_FILTER_DUP_ENABLE); | |
| } | |
| static void le_scan_restart(struct work_struct *work) | |
| { | |
| struct hci_dev *hdev = container_of(work, struct hci_dev, | |
| le_scan_restart.work); | |
| unsigned long timeout, duration, scan_start, now; | |
| int status; | |
| bt_dev_dbg(hdev, ""); | |
| status = hci_le_scan_restart_sync(hdev); | |
| if (status) { | |
| bt_dev_err(hdev, "failed to restart LE scan: status %d", | |
| status); | |
| return; | |
| } | |
| hci_dev_lock(hdev); | |
| if (!test_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks) || | |
| !hdev->discovery.scan_start) | |
| goto unlock; | |
| /* When the scan was started, hdev->le_scan_disable has been queued | |
| * after duration from scan_start. During scan restart this job | |
| * has been canceled, and we need to queue it again after proper | |
| * timeout, to make sure that scan does not run indefinitely. | |
| */ | |
| duration = hdev->discovery.scan_duration; | |
| scan_start = hdev->discovery.scan_start; | |
| now = jiffies; | |
| if (now - scan_start <= duration) { | |
| int elapsed; | |
| if (now >= scan_start) | |
| elapsed = now - scan_start; | |
| else | |
| elapsed = ULONG_MAX - scan_start + now; | |
| timeout = duration - elapsed; | |
| } else { | |
| timeout = 0; | |
| } | |
| queue_delayed_work(hdev->req_workqueue, | |
| &hdev->le_scan_disable, timeout); | |
| unlock: | |
| hci_dev_unlock(hdev); | |
| } | |
| static int reenable_adv_sync(struct hci_dev *hdev, void *data) | |
| { | |
| bt_dev_dbg(hdev, ""); | |
| if (!hci_dev_test_flag(hdev, HCI_ADVERTISING) && | |
| list_empty(&hdev->adv_instances)) | |
| return 0; | |
| if (hdev->cur_adv_instance) { | |
| return hci_schedule_adv_instance_sync(hdev, | |
| hdev->cur_adv_instance, | |
| true); | |
| } else { | |
| if (ext_adv_capable(hdev)) { | |
| hci_start_ext_adv_sync(hdev, 0x00); | |
| } else { | |
| hci_update_adv_data_sync(hdev, 0x00); | |
| hci_update_scan_rsp_data_sync(hdev, 0x00); | |
| hci_enable_advertising_sync(hdev); | |
| } | |
| } | |
| return 0; | |
| } | |
| static void reenable_adv(struct work_struct *work) | |
| { | |
| struct hci_dev *hdev = container_of(work, struct hci_dev, | |
| reenable_adv_work); | |
| int status; | |
| bt_dev_dbg(hdev, ""); | |
| hci_dev_lock(hdev); | |
| status = hci_cmd_sync_queue(hdev, reenable_adv_sync, NULL, NULL); | |
| if (status) | |
| bt_dev_err(hdev, "failed to reenable ADV: %d", status); | |
| hci_dev_unlock(hdev); | |
| } | |
| static void cancel_adv_timeout(struct hci_dev *hdev) | |
| { | |
| if (hdev->adv_instance_timeout) { | |
| hdev->adv_instance_timeout = 0; | |
| cancel_delayed_work(&hdev->adv_instance_expire); | |
| } | |
| } | |
| /* For a single instance: | |
| * - force == true: The instance will be removed even when its remaining | |
| * lifetime is not zero. | |
| * - force == false: the instance will be deactivated but kept stored unless | |
| * the remaining lifetime is zero. | |
| * | |
| * For instance == 0x00: | |
| * - force == true: All instances will be removed regardless of their timeout | |
| * setting. | |
| * - force == false: Only instances that have a timeout will be removed. | |
| */ | |
| int hci_clear_adv_instance_sync(struct hci_dev *hdev, struct sock *sk, | |
| u8 instance, bool force) | |
| { | |
| struct adv_info *adv_instance, *n, *next_instance = NULL; | |
| int err; | |
| u8 rem_inst; | |
| /* Cancel any timeout concerning the removed instance(s). */ | |
| if (!instance || hdev->cur_adv_instance == instance) | |
| cancel_adv_timeout(hdev); | |
| /* Get the next instance to advertise BEFORE we remove | |
| * the current one. This can be the same instance again | |
| * if there is only one instance. | |
| */ | |
| if (instance && hdev->cur_adv_instance == instance) | |
| next_instance = hci_get_next_instance(hdev, instance); | |
| if (instance == 0x00) { | |
| list_for_each_entry_safe(adv_instance, n, &hdev->adv_instances, | |
| list) { | |
| if (!(force || adv_instance->timeout)) | |
| continue; | |
| rem_inst = adv_instance->instance; | |
| err = hci_remove_adv_instance(hdev, rem_inst); | |
| if (!err) | |
| mgmt_advertising_removed(sk, hdev, rem_inst); | |
| } | |
| } else { | |
| adv_instance = hci_find_adv_instance(hdev, instance); | |
| if (force || (adv_instance && adv_instance->timeout && | |
| !adv_instance->remaining_time)) { | |
| /* Don't advertise a removed instance. */ | |
| if (next_instance && | |
| next_instance->instance == instance) | |
| next_instance = NULL; | |
| err = hci_remove_adv_instance(hdev, instance); | |
| if (!err) | |
| mgmt_advertising_removed(sk, hdev, instance); | |
| } | |
| } | |
| if (!hdev_is_powered(hdev) || hci_dev_test_flag(hdev, HCI_ADVERTISING)) | |
| return 0; | |
| if (next_instance && !ext_adv_capable(hdev)) | |
| return hci_schedule_adv_instance_sync(hdev, | |
| next_instance->instance, | |
| false); | |
| return 0; | |
| } | |
| static int adv_timeout_expire_sync(struct hci_dev *hdev, void *data) | |
| { | |
| u8 instance = *(u8 *)data; | |
| kfree(data); | |
| hci_clear_adv_instance_sync(hdev, NULL, instance, false); | |
| if (list_empty(&hdev->adv_instances)) | |
| return hci_disable_advertising_sync(hdev); | |
| return 0; | |
| } | |
| static void adv_timeout_expire(struct work_struct *work) | |
| { | |
| u8 *inst_ptr; | |
| struct hci_dev *hdev = container_of(work, struct hci_dev, | |
| adv_instance_expire.work); | |
| bt_dev_dbg(hdev, ""); | |
| hci_dev_lock(hdev); | |
| hdev->adv_instance_timeout = 0; | |
| if (hdev->cur_adv_instance == 0x00) | |
| goto unlock; | |
| inst_ptr = kmalloc(1, GFP_KERNEL); | |
| if (!inst_ptr) | |
| goto unlock; | |
| *inst_ptr = hdev->cur_adv_instance; | |
| hci_cmd_sync_queue(hdev, adv_timeout_expire_sync, inst_ptr, NULL); | |
| unlock: | |
| hci_dev_unlock(hdev); | |
| } | |
| void hci_cmd_sync_init(struct hci_dev *hdev) | |
| { | |
| INIT_WORK(&hdev->cmd_sync_work, hci_cmd_sync_work); | |
| INIT_LIST_HEAD(&hdev->cmd_sync_work_list); | |
| mutex_init(&hdev->cmd_sync_work_lock); | |
| mutex_init(&hdev->unregister_lock); | |
| INIT_WORK(&hdev->cmd_sync_cancel_work, hci_cmd_sync_cancel_work); | |
| INIT_WORK(&hdev->reenable_adv_work, reenable_adv); | |
| INIT_DELAYED_WORK(&hdev->le_scan_disable, le_scan_disable); | |
| INIT_DELAYED_WORK(&hdev->le_scan_restart, le_scan_restart); | |
| INIT_DELAYED_WORK(&hdev->adv_instance_expire, adv_timeout_expire); | |
| } | |
| static void _hci_cmd_sync_cancel_entry(struct hci_dev *hdev, | |
| struct hci_cmd_sync_work_entry *entry, | |
| int err) | |
| { | |
| if (entry->destroy) | |
| entry->destroy(hdev, entry->data, err); | |
| list_del(&entry->list); | |
| kfree(entry); | |
| } | |
| void hci_cmd_sync_clear(struct hci_dev *hdev) | |
| { | |
| struct hci_cmd_sync_work_entry *entry, *tmp; | |
| cancel_work_sync(&hdev->cmd_sync_work); | |
| cancel_work_sync(&hdev->reenable_adv_work); | |
| mutex_lock(&hdev->cmd_sync_work_lock); | |
| list_for_each_entry_safe(entry, tmp, &hdev->cmd_sync_work_list, list) | |
| _hci_cmd_sync_cancel_entry(hdev, entry, -ECANCELED); | |
| mutex_unlock(&hdev->cmd_sync_work_lock); | |
| } | |
| void hci_cmd_sync_cancel(struct hci_dev *hdev, int err) | |
| { | |
| bt_dev_dbg(hdev, "err 0x%2.2x", err); | |
| if (hdev->req_status == HCI_REQ_PEND) { | |
| hdev->req_result = err; | |
| hdev->req_status = HCI_REQ_CANCELED; | |
| queue_work(hdev->workqueue, &hdev->cmd_sync_cancel_work); | |
| } | |
| } | |
| EXPORT_SYMBOL(hci_cmd_sync_cancel); | |
| /* Cancel ongoing command request synchronously: | |
| * | |
| * - Set result and mark status to HCI_REQ_CANCELED | |
| * - Wakeup command sync thread | |
| */ | |
| void hci_cmd_sync_cancel_sync(struct hci_dev *hdev, int err) | |
| { | |
| bt_dev_dbg(hdev, "err 0x%2.2x", err); | |
| if (hdev->req_status == HCI_REQ_PEND) { | |
| /* req_result is __u32 so error must be positive to be properly | |
| * propagated. | |
| */ | |
| hdev->req_result = err < 0 ? -err : err; | |
| hdev->req_status = HCI_REQ_CANCELED; | |
| wake_up_interruptible(&hdev->req_wait_q); | |
| } | |
| } | |
| EXPORT_SYMBOL(hci_cmd_sync_cancel_sync); | |
| /* Submit HCI command to be run in as cmd_sync_work: | |
| * | |
| * - hdev must _not_ be unregistered | |
| */ | |
| int hci_cmd_sync_submit(struct hci_dev *hdev, hci_cmd_sync_work_func_t func, | |
| void *data, hci_cmd_sync_work_destroy_t destroy) | |
| { | |
| struct hci_cmd_sync_work_entry *entry; | |
| int err = 0; | |
| mutex_lock(&hdev->unregister_lock); | |
| if (hci_dev_test_flag(hdev, HCI_UNREGISTER)) { | |
| err = -ENODEV; | |
| goto unlock; | |
| } | |
| entry = kmalloc(sizeof(*entry), GFP_KERNEL); | |
| if (!entry) { | |
| err = -ENOMEM; | |
| goto unlock; | |
| } | |
| entry->func = func; | |
| entry->data = data; | |
| entry->destroy = destroy; | |
| mutex_lock(&hdev->cmd_sync_work_lock); | |
| list_add_tail(&entry->list, &hdev->cmd_sync_work_list); | |
| mutex_unlock(&hdev->cmd_sync_work_lock); | |
| queue_work(hdev->req_workqueue, &hdev->cmd_sync_work); | |
| unlock: | |
| mutex_unlock(&hdev->unregister_lock); | |
| return err; | |
| } | |
| EXPORT_SYMBOL(hci_cmd_sync_submit); | |
| /* Queue HCI command: | |
| * | |
| * - hdev must be running | |
| */ | |
| int hci_cmd_sync_queue(struct hci_dev *hdev, hci_cmd_sync_work_func_t func, | |
| void *data, hci_cmd_sync_work_destroy_t destroy) | |
| { | |
| /* Only queue command if hdev is running which means it had been opened | |
| * and is either on init phase or is already up. | |
| */ | |
| if (!test_bit(HCI_RUNNING, &hdev->flags)) | |
| return -ENETDOWN; | |
| return hci_cmd_sync_submit(hdev, func, data, destroy); | |
| } | |
| EXPORT_SYMBOL(hci_cmd_sync_queue); | |
| static struct hci_cmd_sync_work_entry * | |
| _hci_cmd_sync_lookup_entry(struct hci_dev *hdev, hci_cmd_sync_work_func_t func, | |
| void *data, hci_cmd_sync_work_destroy_t destroy) | |
| { | |
| struct hci_cmd_sync_work_entry *entry, *tmp; | |
| list_for_each_entry_safe(entry, tmp, &hdev->cmd_sync_work_list, list) { | |
| if (func && entry->func != func) | |
| continue; | |
| if (data && entry->data != data) | |
| continue; | |
| if (destroy && entry->destroy != destroy) | |
| continue; | |
| return entry; | |
| } | |
| return NULL; | |
| } | |
| /* Queue HCI command entry once: | |
| * | |
| * - Lookup if an entry already exist and only if it doesn't creates a new entry | |
| * and queue it. | |
| */ | |
| int hci_cmd_sync_queue_once(struct hci_dev *hdev, hci_cmd_sync_work_func_t func, | |
| void *data, hci_cmd_sync_work_destroy_t destroy) | |
| { | |
| if (hci_cmd_sync_lookup_entry(hdev, func, data, destroy)) | |
| return 0; | |
| return hci_cmd_sync_queue(hdev, func, data, destroy); | |
| } | |
| EXPORT_SYMBOL(hci_cmd_sync_queue_once); | |
| /* Run HCI command: | |
| * | |
| * - hdev must be running | |
| * - if on cmd_sync_work then run immediately otherwise queue | |
| */ | |
| int hci_cmd_sync_run(struct hci_dev *hdev, hci_cmd_sync_work_func_t func, | |
| void *data, hci_cmd_sync_work_destroy_t destroy) | |
| { | |
| /* Only queue command if hdev is running which means it had been opened | |
| * and is either on init phase or is already up. | |
| */ | |
| if (!test_bit(HCI_RUNNING, &hdev->flags)) | |
| return -ENETDOWN; | |
| /* If on cmd_sync_work then run immediately otherwise queue */ | |
| if (current_work() == &hdev->cmd_sync_work) | |
| return func(hdev, data); | |
| return hci_cmd_sync_submit(hdev, func, data, destroy); | |
| } | |
| EXPORT_SYMBOL(hci_cmd_sync_run); | |
| /* Run HCI command entry once: | |
| * | |
| * - Lookup if an entry already exist and only if it doesn't creates a new entry | |
| * and run it. | |
| * - if on cmd_sync_work then run immediately otherwise queue | |
| */ | |
| int hci_cmd_sync_run_once(struct hci_dev *hdev, hci_cmd_sync_work_func_t func, | |
| void *data, hci_cmd_sync_work_destroy_t destroy) | |
| { | |
| if (hci_cmd_sync_lookup_entry(hdev, func, data, destroy)) | |
| return 0; | |
| return hci_cmd_sync_run(hdev, func, data, destroy); | |
| } | |
| EXPORT_SYMBOL(hci_cmd_sync_run_once); | |
| /* Lookup HCI command entry: | |
| * | |
| * - Return first entry that matches by function callback or data or | |
| * destroy callback. | |
| */ | |
| struct hci_cmd_sync_work_entry * | |
| hci_cmd_sync_lookup_entry(struct hci_dev *hdev, hci_cmd_sync_work_func_t func, | |
| void *data, hci_cmd_sync_work_destroy_t destroy) | |
| { | |
| struct hci_cmd_sync_work_entry *entry; | |
| mutex_lock(&hdev->cmd_sync_work_lock); | |
| entry = _hci_cmd_sync_lookup_entry(hdev, func, data, destroy); | |
| mutex_unlock(&hdev->cmd_sync_work_lock); | |
| return entry; | |
| } | |
| EXPORT_SYMBOL(hci_cmd_sync_lookup_entry); | |
| /* Cancel HCI command entry */ | |
| void hci_cmd_sync_cancel_entry(struct hci_dev *hdev, | |
| struct hci_cmd_sync_work_entry *entry) | |
| { | |
| mutex_lock(&hdev->cmd_sync_work_lock); | |
| _hci_cmd_sync_cancel_entry(hdev, entry, -ECANCELED); | |
| mutex_unlock(&hdev->cmd_sync_work_lock); | |
| } | |
| EXPORT_SYMBOL(hci_cmd_sync_cancel_entry); | |
| /* Dequeue one HCI command entry: | |
| * | |
| * - Lookup and cancel first entry that matches. | |
| */ | |
| bool hci_cmd_sync_dequeue_once(struct hci_dev *hdev, | |
| hci_cmd_sync_work_func_t func, | |
| void *data, hci_cmd_sync_work_destroy_t destroy) | |
| { | |
| struct hci_cmd_sync_work_entry *entry; | |
| mutex_lock(&hdev->cmd_sync_work_lock); | |
| entry = _hci_cmd_sync_lookup_entry(hdev, func, data, destroy); | |
| if (!entry) { | |
| mutex_unlock(&hdev->cmd_sync_work_lock); | |
| return false; | |
| } | |
| _hci_cmd_sync_cancel_entry(hdev, entry, -ECANCELED); | |
| mutex_unlock(&hdev->cmd_sync_work_lock); | |
| return true; | |
| } | |
| EXPORT_SYMBOL(hci_cmd_sync_dequeue_once); | |
| /* Dequeue HCI command entry: | |
| * | |
| * - Lookup and cancel any entry that matches by function callback or data or | |
| * destroy callback. | |
| */ | |
| bool hci_cmd_sync_dequeue(struct hci_dev *hdev, hci_cmd_sync_work_func_t func, | |
| void *data, hci_cmd_sync_work_destroy_t destroy) | |
| { | |
| struct hci_cmd_sync_work_entry *entry; | |
| bool ret = false; | |
| mutex_lock(&hdev->cmd_sync_work_lock); | |
| while ((entry = _hci_cmd_sync_lookup_entry(hdev, func, data, | |
| destroy))) { | |
| _hci_cmd_sync_cancel_entry(hdev, entry, -ECANCELED); | |
| ret = true; | |
| } | |
| mutex_unlock(&hdev->cmd_sync_work_lock); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(hci_cmd_sync_dequeue); | |
| int hci_update_eir_sync(struct hci_dev *hdev) | |
| { | |
| struct hci_cp_write_eir cp; | |
| bt_dev_dbg(hdev, ""); | |
| if (!hdev_is_powered(hdev)) | |
| return 0; | |
| if (!lmp_ext_inq_capable(hdev)) | |
| return 0; | |
| if (!hci_dev_test_flag(hdev, HCI_SSP_ENABLED)) | |
| return 0; | |
| if (hci_dev_test_flag(hdev, HCI_SERVICE_CACHE)) | |
| return 0; | |
| memset(&cp, 0, sizeof(cp)); | |
| eir_create(hdev, cp.data); | |
| if (memcmp(cp.data, hdev->eir, sizeof(cp.data)) == 0) | |
| return 0; | |
| memcpy(hdev->eir, cp.data, sizeof(cp.data)); | |
| return __hci_cmd_sync_status(hdev, HCI_OP_WRITE_EIR, sizeof(cp), &cp, | |
| HCI_CMD_TIMEOUT); | |
| } | |
| static u8 get_service_classes(struct hci_dev *hdev) | |
| { | |
| struct bt_uuid *uuid; | |
| u8 val = 0; | |
| list_for_each_entry(uuid, &hdev->uuids, list) | |
| val |= uuid->svc_hint; | |
| return val; | |
| } | |
| int hci_update_class_sync(struct hci_dev *hdev) | |
| { | |
| u8 cod[3]; | |
| bt_dev_dbg(hdev, ""); | |
| if (!hdev_is_powered(hdev)) | |
| return 0; | |
| if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) | |
| return 0; | |
| if (hci_dev_test_flag(hdev, HCI_SERVICE_CACHE)) | |
| return 0; | |
| cod[0] = hdev->minor_class; | |
| cod[1] = hdev->major_class; | |
| cod[2] = get_service_classes(hdev); | |
| if (hci_dev_test_flag(hdev, HCI_LIMITED_DISCOVERABLE)) | |
| cod[1] |= 0x20; | |
| if (memcmp(cod, hdev->dev_class, 3) == 0) | |
| return 0; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_WRITE_CLASS_OF_DEV, | |
| sizeof(cod), cod, HCI_CMD_TIMEOUT); | |
| } | |
| static bool is_advertising_allowed(struct hci_dev *hdev, bool connectable) | |
| { | |
| /* If there is no connection we are OK to advertise. */ | |
| if (hci_conn_num(hdev, LE_LINK) == 0) | |
| return true; | |
| /* Check le_states if there is any connection in peripheral role. */ | |
| if (hdev->conn_hash.le_num_peripheral > 0) { | |
| /* Peripheral connection state and non connectable mode | |
| * bit 20. | |
| */ | |
| if (!connectable && !(hdev->le_states[2] & 0x10)) | |
| return false; | |
| /* Peripheral connection state and connectable mode bit 38 | |
| * and scannable bit 21. | |
| */ | |
| if (connectable && (!(hdev->le_states[4] & 0x40) || | |
| !(hdev->le_states[2] & 0x20))) | |
| return false; | |
| } | |
| /* Check le_states if there is any connection in central role. */ | |
| if (hci_conn_num(hdev, LE_LINK) != hdev->conn_hash.le_num_peripheral) { | |
| /* Central connection state and non connectable mode bit 18. */ | |
| if (!connectable && !(hdev->le_states[2] & 0x02)) | |
| return false; | |
| /* Central connection state and connectable mode bit 35 and | |
| * scannable 19. | |
| */ | |
| if (connectable && (!(hdev->le_states[4] & 0x08) || | |
| !(hdev->le_states[2] & 0x08))) | |
| return false; | |
| } | |
| return true; | |
| } | |
| static bool adv_use_rpa(struct hci_dev *hdev, uint32_t flags) | |
| { | |
| /* If privacy is not enabled don't use RPA */ | |
| if (!hci_dev_test_flag(hdev, HCI_PRIVACY)) | |
| return false; | |
| /* If basic privacy mode is enabled use RPA */ | |
| if (!hci_dev_test_flag(hdev, HCI_LIMITED_PRIVACY)) | |
| return true; | |
| /* If limited privacy mode is enabled don't use RPA if we're | |
| * both discoverable and bondable. | |
| */ | |
| if ((flags & MGMT_ADV_FLAG_DISCOV) && | |
| hci_dev_test_flag(hdev, HCI_BONDABLE)) | |
| return false; | |
| /* We're neither bondable nor discoverable in the limited | |
| * privacy mode, therefore use RPA. | |
| */ | |
| return true; | |
| } | |
| static int hci_set_random_addr_sync(struct hci_dev *hdev, bdaddr_t *rpa) | |
| { | |
| /* If a random_addr has been set we're advertising or initiating an LE | |
| * connection we can't go ahead and change the random address at this | |
| * time. This is because the eventual initiator address used for the | |
| * subsequently created connection will be undefined (some | |
| * controllers use the new address and others the one we had | |
| * when the operation started). | |
| * | |
| * In this kind of scenario skip the update and let the random | |
| * address be updated at the next cycle. | |
| */ | |
| if (bacmp(&hdev->random_addr, BDADDR_ANY) && | |
| (hci_dev_test_flag(hdev, HCI_LE_ADV) || | |
| hci_lookup_le_connect(hdev))) { | |
| bt_dev_dbg(hdev, "Deferring random address update"); | |
| hci_dev_set_flag(hdev, HCI_RPA_EXPIRED); | |
| return 0; | |
| } | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_RANDOM_ADDR, | |
| 6, rpa, HCI_CMD_TIMEOUT); | |
| } | |
| int hci_update_random_address_sync(struct hci_dev *hdev, bool require_privacy, | |
| bool rpa, u8 *own_addr_type) | |
| { | |
| int err; | |
| /* If privacy is enabled use a resolvable private address. If | |
| * current RPA has expired or there is something else than | |
| * the current RPA in use, then generate a new one. | |
| */ | |
| if (rpa) { | |
| /* If Controller supports LL Privacy use own address type is | |
| * 0x03 | |
| */ | |
| if (use_ll_privacy(hdev)) | |
| *own_addr_type = ADDR_LE_DEV_RANDOM_RESOLVED; | |
| else | |
| *own_addr_type = ADDR_LE_DEV_RANDOM; | |
| /* Check if RPA is valid */ | |
| if (rpa_valid(hdev)) | |
| return 0; | |
| err = smp_generate_rpa(hdev, hdev->irk, &hdev->rpa); | |
| if (err < 0) { | |
| bt_dev_err(hdev, "failed to generate new RPA"); | |
| return err; | |
| } | |
| err = hci_set_random_addr_sync(hdev, &hdev->rpa); | |
| if (err) | |
| return err; | |
| return 0; | |
| } | |
| /* In case of required privacy without resolvable private address, | |
| * use an non-resolvable private address. This is useful for active | |
| * scanning and non-connectable advertising. | |
| */ | |
| if (require_privacy) { | |
| bdaddr_t nrpa; | |
| while (true) { | |
| /* The non-resolvable private address is generated | |
| * from random six bytes with the two most significant | |
| * bits cleared. | |
| */ | |
| get_random_bytes(&nrpa, 6); | |
| nrpa.b[5] &= 0x3f; | |
| /* The non-resolvable private address shall not be | |
| * equal to the public address. | |
| */ | |
| if (bacmp(&hdev->bdaddr, &nrpa)) | |
| break; | |
| } | |
| *own_addr_type = ADDR_LE_DEV_RANDOM; | |
| return hci_set_random_addr_sync(hdev, &nrpa); | |
| } | |
| /* If forcing static address is in use or there is no public | |
| * address use the static address as random address (but skip | |
| * the HCI command if the current random address is already the | |
| * static one. | |
| * | |
| * In case BR/EDR has been disabled on a dual-mode controller | |
| * and a static address has been configured, then use that | |
| * address instead of the public BR/EDR address. | |
| */ | |
| if (hci_dev_test_flag(hdev, HCI_FORCE_STATIC_ADDR) || | |
| !bacmp(&hdev->bdaddr, BDADDR_ANY) || | |
| (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED) && | |
| bacmp(&hdev->static_addr, BDADDR_ANY))) { | |
| *own_addr_type = ADDR_LE_DEV_RANDOM; | |
| if (bacmp(&hdev->static_addr, &hdev->random_addr)) | |
| return hci_set_random_addr_sync(hdev, | |
| &hdev->static_addr); | |
| return 0; | |
| } | |
| /* Neither privacy nor static address is being used so use a | |
| * public address. | |
| */ | |
| *own_addr_type = ADDR_LE_DEV_PUBLIC; | |
| return 0; | |
| } | |
| static int hci_disable_ext_adv_instance_sync(struct hci_dev *hdev, u8 instance) | |
| { | |
| struct hci_cp_le_set_ext_adv_enable *cp; | |
| struct hci_cp_ext_adv_set *set; | |
| u8 data[sizeof(*cp) + sizeof(*set) * 1]; | |
| u8 size; | |
| /* If request specifies an instance that doesn't exist, fail */ | |
| if (instance > 0) { | |
| struct adv_info *adv; | |
| adv = hci_find_adv_instance(hdev, instance); | |
| if (!adv) | |
| return -EINVAL; | |
| /* If not enabled there is nothing to do */ | |
| if (!adv->enabled) | |
| return 0; | |
| } | |
| memset(data, 0, sizeof(data)); | |
| cp = (void *)data; | |
| set = (void *)cp->data; | |
| /* Instance 0x00 indicates all advertising instances will be disabled */ | |
| cp->num_of_sets = !!instance; | |
| cp->enable = 0x00; | |
| set->handle = instance; | |
| size = sizeof(*cp) + sizeof(*set) * cp->num_of_sets; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_EXT_ADV_ENABLE, | |
| size, data, HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_set_adv_set_random_addr_sync(struct hci_dev *hdev, u8 instance, | |
| bdaddr_t *random_addr) | |
| { | |
| struct hci_cp_le_set_adv_set_rand_addr cp; | |
| int err; | |
| if (!instance) { | |
| /* Instance 0x00 doesn't have an adv_info, instead it uses | |
| * hdev->random_addr to track its address so whenever it needs | |
| * to be updated this also set the random address since | |
| * hdev->random_addr is shared with scan state machine. | |
| */ | |
| err = hci_set_random_addr_sync(hdev, random_addr); | |
| if (err) | |
| return err; | |
| } | |
| memset(&cp, 0, sizeof(cp)); | |
| cp.handle = instance; | |
| bacpy(&cp.bdaddr, random_addr); | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_ADV_SET_RAND_ADDR, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| static int | |
| hci_set_ext_adv_params_sync(struct hci_dev *hdev, struct adv_info *adv, | |
| const struct hci_cp_le_set_ext_adv_params *cp, | |
| struct hci_rp_le_set_ext_adv_params *rp) | |
| { | |
| struct sk_buff *skb; | |
| skb = __hci_cmd_sync(hdev, HCI_OP_LE_SET_EXT_ADV_PARAMS, sizeof(*cp), | |
| cp, HCI_CMD_TIMEOUT); | |
| /* If command return a status event, skb will be set to -ENODATA */ | |
| if (skb == ERR_PTR(-ENODATA)) | |
| return 0; | |
| if (IS_ERR(skb)) { | |
| bt_dev_err(hdev, "Opcode 0x%4.4x failed: %ld", | |
| HCI_OP_LE_SET_EXT_ADV_PARAMS, PTR_ERR(skb)); | |
| return PTR_ERR(skb); | |
| } | |
| if (skb->len != sizeof(*rp)) { | |
| bt_dev_err(hdev, "Invalid response length for 0x%4.4x: %u", | |
| HCI_OP_LE_SET_EXT_ADV_PARAMS, skb->len); | |
| kfree_skb(skb); | |
| return -EIO; | |
| } | |
| memcpy(rp, skb->data, sizeof(*rp)); | |
| kfree_skb(skb); | |
| if (!rp->status) { | |
| hdev->adv_addr_type = cp->own_addr_type; | |
| if (!cp->handle) { | |
| /* Store in hdev for instance 0 */ | |
| hdev->adv_tx_power = rp->tx_power; | |
| } else if (adv) { | |
| adv->tx_power = rp->tx_power; | |
| } | |
| } | |
| return rp->status; | |
| } | |
| static int hci_set_ext_adv_data_sync(struct hci_dev *hdev, u8 instance) | |
| { | |
| struct { | |
| struct hci_cp_le_set_ext_adv_data cp; | |
| u8 data[HCI_MAX_EXT_AD_LENGTH]; | |
| } pdu; | |
| u8 len; | |
| struct adv_info *adv = NULL; | |
| int err; | |
| memset(&pdu, 0, sizeof(pdu)); | |
| if (instance) { | |
| adv = hci_find_adv_instance(hdev, instance); | |
| if (!adv || !adv->adv_data_changed) | |
| return 0; | |
| } | |
| len = eir_create_adv_data(hdev, instance, pdu.data); | |
| pdu.cp.length = len; | |
| pdu.cp.handle = instance; | |
| pdu.cp.operation = LE_SET_ADV_DATA_OP_COMPLETE; | |
| pdu.cp.frag_pref = LE_SET_ADV_DATA_NO_FRAG; | |
| err = __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_EXT_ADV_DATA, | |
| sizeof(pdu.cp) + len, &pdu.cp, | |
| HCI_CMD_TIMEOUT); | |
| if (err) | |
| return err; | |
| /* Update data if the command succeed */ | |
| if (adv) { | |
| adv->adv_data_changed = false; | |
| } else { | |
| memcpy(hdev->adv_data, pdu.data, len); | |
| hdev->adv_data_len = len; | |
| } | |
| return 0; | |
| } | |
| static int hci_set_adv_data_sync(struct hci_dev *hdev, u8 instance) | |
| { | |
| struct hci_cp_le_set_adv_data cp; | |
| u8 len; | |
| memset(&cp, 0, sizeof(cp)); | |
| len = eir_create_adv_data(hdev, instance, cp.data); | |
| /* There's nothing to do if the data hasn't changed */ | |
| if (hdev->adv_data_len == len && | |
| memcmp(cp.data, hdev->adv_data, len) == 0) | |
| return 0; | |
| memcpy(hdev->adv_data, cp.data, sizeof(cp.data)); | |
| hdev->adv_data_len = len; | |
| cp.length = len; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_ADV_DATA, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| int hci_update_adv_data_sync(struct hci_dev *hdev, u8 instance) | |
| { | |
| if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED)) | |
| return 0; | |
| if (ext_adv_capable(hdev)) | |
| return hci_set_ext_adv_data_sync(hdev, instance); | |
| return hci_set_adv_data_sync(hdev, instance); | |
| } | |
| int hci_setup_ext_adv_instance_sync(struct hci_dev *hdev, u8 instance) | |
| { | |
| struct hci_cp_le_set_ext_adv_params cp; | |
| struct hci_rp_le_set_ext_adv_params rp; | |
| bool connectable, require_privacy; | |
| u32 flags; | |
| bdaddr_t random_addr; | |
| u8 own_addr_type; | |
| int err; | |
| struct adv_info *adv; | |
| bool secondary_adv; | |
| if (instance > 0) { | |
| adv = hci_find_adv_instance(hdev, instance); | |
| if (!adv) | |
| return -EINVAL; | |
| } else { | |
| adv = NULL; | |
| } | |
| /* Updating parameters of an active instance will return a | |
| * Command Disallowed error, so we must first disable the | |
| * instance if it is active. | |
| */ | |
| if (adv) { | |
| err = hci_disable_ext_adv_instance_sync(hdev, instance); | |
| if (err) | |
| return err; | |
| } | |
| flags = hci_adv_instance_flags(hdev, instance); | |
| /* If the "connectable" instance flag was not set, then choose between | |
| * ADV_IND and ADV_NONCONN_IND based on the global connectable setting. | |
| */ | |
| connectable = (flags & MGMT_ADV_FLAG_CONNECTABLE) || | |
| mgmt_get_connectable(hdev); | |
| if (!is_advertising_allowed(hdev, connectable)) | |
| return -EPERM; | |
| /* Set require_privacy to true only when non-connectable | |
| * advertising is used and it is not periodic. | |
| * In that case it is fine to use a non-resolvable private address. | |
| */ | |
| require_privacy = !connectable && !(adv && adv->periodic); | |
| err = hci_get_random_address(hdev, require_privacy, | |
| adv_use_rpa(hdev, flags), adv, | |
| &own_addr_type, &random_addr); | |
| if (err < 0) | |
| return err; | |
| memset(&cp, 0, sizeof(cp)); | |
| if (adv) { | |
| hci_cpu_to_le24(adv->min_interval, cp.min_interval); | |
| hci_cpu_to_le24(adv->max_interval, cp.max_interval); | |
| cp.tx_power = adv->tx_power; | |
| } else { | |
| hci_cpu_to_le24(hdev->le_adv_min_interval, cp.min_interval); | |
| hci_cpu_to_le24(hdev->le_adv_max_interval, cp.max_interval); | |
| cp.tx_power = HCI_ADV_TX_POWER_NO_PREFERENCE; | |
| } | |
| secondary_adv = (flags & MGMT_ADV_FLAG_SEC_MASK); | |
| if (connectable) { | |
| if (secondary_adv) | |
| cp.evt_properties = cpu_to_le16(LE_EXT_ADV_CONN_IND); | |
| else | |
| cp.evt_properties = cpu_to_le16(LE_LEGACY_ADV_IND); | |
| } else if (hci_adv_instance_is_scannable(hdev, instance) || | |
| (flags & MGMT_ADV_PARAM_SCAN_RSP)) { | |
| if (secondary_adv) | |
| cp.evt_properties = cpu_to_le16(LE_EXT_ADV_SCAN_IND); | |
| else | |
| cp.evt_properties = cpu_to_le16(LE_LEGACY_ADV_SCAN_IND); | |
| } else { | |
| if (secondary_adv) | |
| cp.evt_properties = cpu_to_le16(LE_EXT_ADV_NON_CONN_IND); | |
| else | |
| cp.evt_properties = cpu_to_le16(LE_LEGACY_NONCONN_IND); | |
| } | |
| /* If Own_Address_Type equals 0x02 or 0x03, the Peer_Address parameter | |
| * contains the peer’s Identity Address and the Peer_Address_Type | |
| * parameter contains the peer’s Identity Type (i.e., 0x00 or 0x01). | |
| * These parameters are used to locate the corresponding local IRK in | |
| * the resolving list; this IRK is used to generate their own address | |
| * used in the advertisement. | |
| */ | |
| if (own_addr_type == ADDR_LE_DEV_RANDOM_RESOLVED) | |
| hci_copy_identity_address(hdev, &cp.peer_addr, | |
| &cp.peer_addr_type); | |
| cp.own_addr_type = own_addr_type; | |
| cp.channel_map = hdev->le_adv_channel_map; | |
| cp.handle = instance; | |
| if (flags & MGMT_ADV_FLAG_SEC_2M) { | |
| cp.primary_phy = HCI_ADV_PHY_1M; | |
| cp.secondary_phy = HCI_ADV_PHY_2M; | |
| } else if (flags & MGMT_ADV_FLAG_SEC_CODED) { | |
| cp.primary_phy = HCI_ADV_PHY_CODED; | |
| cp.secondary_phy = HCI_ADV_PHY_CODED; | |
| } else { | |
| /* In all other cases use 1M */ | |
| cp.primary_phy = HCI_ADV_PHY_1M; | |
| cp.secondary_phy = HCI_ADV_PHY_1M; | |
| } | |
| err = hci_set_ext_adv_params_sync(hdev, adv, &cp, &rp); | |
| if (err) | |
| return err; | |
| /* Update adv data as tx power is known now */ | |
| err = hci_set_ext_adv_data_sync(hdev, cp.handle); | |
| if (err) | |
| return err; | |
| if ((own_addr_type == ADDR_LE_DEV_RANDOM || | |
| own_addr_type == ADDR_LE_DEV_RANDOM_RESOLVED) && | |
| bacmp(&random_addr, BDADDR_ANY)) { | |
| /* Check if random address need to be updated */ | |
| if (adv) { | |
| if (!bacmp(&random_addr, &adv->random_addr)) | |
| return 0; | |
| } else { | |
| if (!bacmp(&random_addr, &hdev->random_addr)) | |
| return 0; | |
| } | |
| return hci_set_adv_set_random_addr_sync(hdev, instance, | |
| &random_addr); | |
| } | |
| return 0; | |
| } | |
| static int hci_set_ext_scan_rsp_data_sync(struct hci_dev *hdev, u8 instance) | |
| { | |
| struct { | |
| struct hci_cp_le_set_ext_scan_rsp_data cp; | |
| u8 data[HCI_MAX_EXT_AD_LENGTH]; | |
| } pdu; | |
| u8 len; | |
| struct adv_info *adv = NULL; | |
| int err; | |
| memset(&pdu, 0, sizeof(pdu)); | |
| if (instance) { | |
| adv = hci_find_adv_instance(hdev, instance); | |
| if (!adv || !adv->scan_rsp_changed) | |
| return 0; | |
| } | |
| len = eir_create_scan_rsp(hdev, instance, pdu.data); | |
| pdu.cp.handle = instance; | |
| pdu.cp.length = len; | |
| pdu.cp.operation = LE_SET_ADV_DATA_OP_COMPLETE; | |
| pdu.cp.frag_pref = LE_SET_ADV_DATA_NO_FRAG; | |
| err = __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_EXT_SCAN_RSP_DATA, | |
| sizeof(pdu.cp) + len, &pdu.cp, | |
| HCI_CMD_TIMEOUT); | |
| if (err) | |
| return err; | |
| if (adv) { | |
| adv->scan_rsp_changed = false; | |
| } else { | |
| memcpy(hdev->scan_rsp_data, pdu.data, len); | |
| hdev->scan_rsp_data_len = len; | |
| } | |
| return 0; | |
| } | |
| static int __hci_set_scan_rsp_data_sync(struct hci_dev *hdev, u8 instance) | |
| { | |
| struct hci_cp_le_set_scan_rsp_data cp; | |
| u8 len; | |
| memset(&cp, 0, sizeof(cp)); | |
| len = eir_create_scan_rsp(hdev, instance, cp.data); | |
| if (hdev->scan_rsp_data_len == len && | |
| !memcmp(cp.data, hdev->scan_rsp_data, len)) | |
| return 0; | |
| memcpy(hdev->scan_rsp_data, cp.data, sizeof(cp.data)); | |
| hdev->scan_rsp_data_len = len; | |
| cp.length = len; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_SCAN_RSP_DATA, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| int hci_update_scan_rsp_data_sync(struct hci_dev *hdev, u8 instance) | |
| { | |
| if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED)) | |
| return 0; | |
| if (ext_adv_capable(hdev)) | |
| return hci_set_ext_scan_rsp_data_sync(hdev, instance); | |
| return __hci_set_scan_rsp_data_sync(hdev, instance); | |
| } | |
| int hci_enable_ext_advertising_sync(struct hci_dev *hdev, u8 instance) | |
| { | |
| struct hci_cp_le_set_ext_adv_enable *cp; | |
| struct hci_cp_ext_adv_set *set; | |
| u8 data[sizeof(*cp) + sizeof(*set) * 1]; | |
| struct adv_info *adv; | |
| if (instance > 0) { | |
| adv = hci_find_adv_instance(hdev, instance); | |
| if (!adv) | |
| return -EINVAL; | |
| /* If already enabled there is nothing to do */ | |
| if (adv->enabled) | |
| return 0; | |
| } else { | |
| adv = NULL; | |
| } | |
| cp = (void *)data; | |
| set = (void *)cp->data; | |
| memset(cp, 0, sizeof(*cp)); | |
| cp->enable = 0x01; | |
| cp->num_of_sets = 0x01; | |
| memset(set, 0, sizeof(*set)); | |
| set->handle = instance; | |
| /* Set duration per instance since controller is responsible for | |
| * scheduling it. | |
| */ | |
| if (adv && adv->timeout) { | |
| u16 duration = adv->timeout * MSEC_PER_SEC; | |
| /* Time = N * 10 ms */ | |
| set->duration = cpu_to_le16(duration / 10); | |
| } | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_EXT_ADV_ENABLE, | |
| sizeof(*cp) + | |
| sizeof(*set) * cp->num_of_sets, | |
| data, HCI_CMD_TIMEOUT); | |
| } | |
| int hci_start_ext_adv_sync(struct hci_dev *hdev, u8 instance) | |
| { | |
| int err; | |
| err = hci_setup_ext_adv_instance_sync(hdev, instance); | |
| if (err) | |
| return err; | |
| err = hci_set_ext_scan_rsp_data_sync(hdev, instance); | |
| if (err) | |
| return err; | |
| return hci_enable_ext_advertising_sync(hdev, instance); | |
| } | |
| int hci_disable_per_advertising_sync(struct hci_dev *hdev, u8 instance) | |
| { | |
| struct hci_cp_le_set_per_adv_enable cp; | |
| struct adv_info *adv = NULL; | |
| /* If periodic advertising already disabled there is nothing to do. */ | |
| adv = hci_find_adv_instance(hdev, instance); | |
| if (!adv || !adv->periodic_enabled) | |
| return 0; | |
| memset(&cp, 0, sizeof(cp)); | |
| cp.enable = 0x00; | |
| cp.handle = instance; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_PER_ADV_ENABLE, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_set_per_adv_params_sync(struct hci_dev *hdev, u8 instance, | |
| u16 min_interval, u16 max_interval) | |
| { | |
| struct hci_cp_le_set_per_adv_params cp; | |
| memset(&cp, 0, sizeof(cp)); | |
| if (!min_interval) | |
| min_interval = DISCOV_LE_PER_ADV_INT_MIN; | |
| if (!max_interval) | |
| max_interval = DISCOV_LE_PER_ADV_INT_MAX; | |
| cp.handle = instance; | |
| cp.min_interval = cpu_to_le16(min_interval); | |
| cp.max_interval = cpu_to_le16(max_interval); | |
| cp.periodic_properties = 0x0000; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_PER_ADV_PARAMS, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_set_per_adv_data_sync(struct hci_dev *hdev, u8 instance) | |
| { | |
| struct { | |
| struct hci_cp_le_set_per_adv_data cp; | |
| u8 data[HCI_MAX_PER_AD_LENGTH]; | |
| } pdu; | |
| u8 len; | |
| memset(&pdu, 0, sizeof(pdu)); | |
| if (instance) { | |
| struct adv_info *adv = hci_find_adv_instance(hdev, instance); | |
| if (!adv || !adv->periodic) | |
| return 0; | |
| } | |
| len = eir_create_per_adv_data(hdev, instance, pdu.data); | |
| pdu.cp.length = len; | |
| pdu.cp.handle = instance; | |
| pdu.cp.operation = LE_SET_ADV_DATA_OP_COMPLETE; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_PER_ADV_DATA, | |
| sizeof(pdu.cp) + len, &pdu, | |
| HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_enable_per_advertising_sync(struct hci_dev *hdev, u8 instance) | |
| { | |
| struct hci_cp_le_set_per_adv_enable cp; | |
| struct adv_info *adv = NULL; | |
| /* If periodic advertising already enabled there is nothing to do. */ | |
| adv = hci_find_adv_instance(hdev, instance); | |
| if (adv && adv->periodic_enabled) | |
| return 0; | |
| memset(&cp, 0, sizeof(cp)); | |
| cp.enable = 0x01; | |
| cp.handle = instance; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_PER_ADV_ENABLE, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| /* Checks if periodic advertising data contains a Basic Announcement and if it | |
| * does generates a Broadcast ID and add Broadcast Announcement. | |
| */ | |
| static int hci_adv_bcast_annoucement(struct hci_dev *hdev, struct adv_info *adv) | |
| { | |
| u8 bid[3]; | |
| u8 ad[HCI_MAX_EXT_AD_LENGTH]; | |
| u8 len; | |
| /* Skip if NULL adv as instance 0x00 is used for general purpose | |
| * advertising so it cannot used for the likes of Broadcast Announcement | |
| * as it can be overwritten at any point. | |
| */ | |
| if (!adv) | |
| return 0; | |
| /* Check if PA data doesn't contains a Basic Audio Announcement then | |
| * there is nothing to do. | |
| */ | |
| if (!eir_get_service_data(adv->per_adv_data, adv->per_adv_data_len, | |
| 0x1851, NULL)) | |
| return 0; | |
| /* Check if advertising data already has a Broadcast Announcement since | |
| * the process may want to control the Broadcast ID directly and in that | |
| * case the kernel shall no interfere. | |
| */ | |
| if (eir_get_service_data(adv->adv_data, adv->adv_data_len, 0x1852, | |
| NULL)) | |
| return 0; | |
| /* Generate Broadcast ID */ | |
| get_random_bytes(bid, sizeof(bid)); | |
| len = eir_append_service_data(ad, 0, 0x1852, bid, sizeof(bid)); | |
| memcpy(ad + len, adv->adv_data, adv->adv_data_len); | |
| hci_set_adv_instance_data(hdev, adv->instance, len + adv->adv_data_len, | |
| ad, 0, NULL); | |
| return hci_update_adv_data_sync(hdev, adv->instance); | |
| } | |
| int hci_start_per_adv_sync(struct hci_dev *hdev, u8 instance, u8 data_len, | |
| u8 *data, u32 flags, u16 min_interval, | |
| u16 max_interval, u16 sync_interval) | |
| { | |
| struct adv_info *adv = NULL; | |
| int err; | |
| bool added = false; | |
| hci_disable_per_advertising_sync(hdev, instance); | |
| if (instance) { | |
| adv = hci_find_adv_instance(hdev, instance); | |
| if (adv) { | |
| /* Turn it into periodic advertising */ | |
| adv->periodic = true; | |
| adv->per_adv_data_len = data_len; | |
| if (data) | |
| memcpy(adv->per_adv_data, data, data_len); | |
| adv->flags = flags; | |
| } else if (!adv) { | |
| /* Create an instance if that could not be found */ | |
| adv = hci_add_per_instance(hdev, instance, flags, | |
| data_len, data, | |
| sync_interval, | |
| sync_interval); | |
| if (IS_ERR(adv)) | |
| return PTR_ERR(adv); | |
| adv->pending = false; | |
| added = true; | |
| } | |
| } | |
| /* Start advertising */ | |
| err = hci_start_ext_adv_sync(hdev, instance); | |
| if (err < 0) | |
| goto fail; | |
| err = hci_adv_bcast_annoucement(hdev, adv); | |
| if (err < 0) | |
| goto fail; | |
| err = hci_set_per_adv_params_sync(hdev, instance, min_interval, | |
| max_interval); | |
| if (err < 0) | |
| goto fail; | |
| err = hci_set_per_adv_data_sync(hdev, instance); | |
| if (err < 0) | |
| goto fail; | |
| err = hci_enable_per_advertising_sync(hdev, instance); | |
| if (err < 0) | |
| goto fail; | |
| return 0; | |
| fail: | |
| if (added) | |
| hci_remove_adv_instance(hdev, instance); | |
| return err; | |
| } | |
| static int hci_start_adv_sync(struct hci_dev *hdev, u8 instance) | |
| { | |
| int err; | |
| if (ext_adv_capable(hdev)) | |
| return hci_start_ext_adv_sync(hdev, instance); | |
| err = hci_update_adv_data_sync(hdev, instance); | |
| if (err) | |
| return err; | |
| err = hci_update_scan_rsp_data_sync(hdev, instance); | |
| if (err) | |
| return err; | |
| return hci_enable_advertising_sync(hdev); | |
| } | |
| int hci_enable_advertising_sync(struct hci_dev *hdev) | |
| { | |
| struct adv_info *adv_instance; | |
| struct hci_cp_le_set_adv_param cp; | |
| u8 own_addr_type, enable = 0x01; | |
| bool connectable; | |
| u16 adv_min_interval, adv_max_interval; | |
| u32 flags; | |
| u8 status; | |
| if (ext_adv_capable(hdev)) | |
| return hci_enable_ext_advertising_sync(hdev, | |
| hdev->cur_adv_instance); | |
| flags = hci_adv_instance_flags(hdev, hdev->cur_adv_instance); | |
| adv_instance = hci_find_adv_instance(hdev, hdev->cur_adv_instance); | |
| /* If the "connectable" instance flag was not set, then choose between | |
| * ADV_IND and ADV_NONCONN_IND based on the global connectable setting. | |
| */ | |
| connectable = (flags & MGMT_ADV_FLAG_CONNECTABLE) || | |
| mgmt_get_connectable(hdev); | |
| if (!is_advertising_allowed(hdev, connectable)) | |
| return -EINVAL; | |
| status = hci_disable_advertising_sync(hdev); | |
| if (status) | |
| return status; | |
| /* Clear the HCI_LE_ADV bit temporarily so that the | |
| * hci_update_random_address knows that it's safe to go ahead | |
| * and write a new random address. The flag will be set back on | |
| * as soon as the SET_ADV_ENABLE HCI command completes. | |
| */ | |
| hci_dev_clear_flag(hdev, HCI_LE_ADV); | |
| /* Set require_privacy to true only when non-connectable | |
| * advertising is used. In that case it is fine to use a | |
| * non-resolvable private address. | |
| */ | |
| status = hci_update_random_address_sync(hdev, !connectable, | |
| adv_use_rpa(hdev, flags), | |
| &own_addr_type); | |
| if (status) | |
| return status; | |
| memset(&cp, 0, sizeof(cp)); | |
| if (adv_instance) { | |
| adv_min_interval = adv_instance->min_interval; | |
| adv_max_interval = adv_instance->max_interval; | |
| } else { | |
| adv_min_interval = hdev->le_adv_min_interval; | |
| adv_max_interval = hdev->le_adv_max_interval; | |
| } | |
| if (connectable) { | |
| cp.type = LE_ADV_IND; | |
| } else { | |
| if (hci_adv_instance_is_scannable(hdev, hdev->cur_adv_instance)) | |
| cp.type = LE_ADV_SCAN_IND; | |
| else | |
| cp.type = LE_ADV_NONCONN_IND; | |
| if (!hci_dev_test_flag(hdev, HCI_DISCOVERABLE) || | |
| hci_dev_test_flag(hdev, HCI_LIMITED_DISCOVERABLE)) { | |
| adv_min_interval = DISCOV_LE_FAST_ADV_INT_MIN; | |
| adv_max_interval = DISCOV_LE_FAST_ADV_INT_MAX; | |
| } | |
| } | |
| cp.min_interval = cpu_to_le16(adv_min_interval); | |
| cp.max_interval = cpu_to_le16(adv_max_interval); | |
| cp.own_address_type = own_addr_type; | |
| cp.channel_map = hdev->le_adv_channel_map; | |
| status = __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_ADV_PARAM, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| if (status) | |
| return status; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_ADV_ENABLE, | |
| sizeof(enable), &enable, HCI_CMD_TIMEOUT); | |
| } | |
| static int enable_advertising_sync(struct hci_dev *hdev, void *data) | |
| { | |
| return hci_enable_advertising_sync(hdev); | |
| } | |
| int hci_enable_advertising(struct hci_dev *hdev) | |
| { | |
| if (!hci_dev_test_flag(hdev, HCI_ADVERTISING) && | |
| list_empty(&hdev->adv_instances)) | |
| return 0; | |
| return hci_cmd_sync_queue(hdev, enable_advertising_sync, NULL, NULL); | |
| } | |
| int hci_remove_ext_adv_instance_sync(struct hci_dev *hdev, u8 instance, | |
| struct sock *sk) | |
| { | |
| int err; | |
| if (!ext_adv_capable(hdev)) | |
| return 0; | |
| err = hci_disable_ext_adv_instance_sync(hdev, instance); | |
| if (err) | |
| return err; | |
| /* If request specifies an instance that doesn't exist, fail */ | |
| if (instance > 0 && !hci_find_adv_instance(hdev, instance)) | |
| return -EINVAL; | |
| return __hci_cmd_sync_status_sk(hdev, HCI_OP_LE_REMOVE_ADV_SET, | |
| sizeof(instance), &instance, 0, | |
| HCI_CMD_TIMEOUT, sk); | |
| } | |
| static int remove_ext_adv_sync(struct hci_dev *hdev, void *data) | |
| { | |
| struct adv_info *adv = data; | |
| u8 instance = 0; | |
| if (adv) | |
| instance = adv->instance; | |
| return hci_remove_ext_adv_instance_sync(hdev, instance, NULL); | |
| } | |
| int hci_remove_ext_adv_instance(struct hci_dev *hdev, u8 instance) | |
| { | |
| struct adv_info *adv = NULL; | |
| if (instance) { | |
| adv = hci_find_adv_instance(hdev, instance); | |
| if (!adv) | |
| return -EINVAL; | |
| } | |
| return hci_cmd_sync_queue(hdev, remove_ext_adv_sync, adv, NULL); | |
| } | |
| int hci_le_terminate_big_sync(struct hci_dev *hdev, u8 handle, u8 reason) | |
| { | |
| struct hci_cp_le_term_big cp; | |
| memset(&cp, 0, sizeof(cp)); | |
| cp.handle = handle; | |
| cp.reason = reason; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_TERM_BIG, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| int hci_schedule_adv_instance_sync(struct hci_dev *hdev, u8 instance, | |
| bool force) | |
| { | |
| struct adv_info *adv = NULL; | |
| u16 timeout; | |
| if (hci_dev_test_flag(hdev, HCI_ADVERTISING) && !ext_adv_capable(hdev)) | |
| return -EPERM; | |
| if (hdev->adv_instance_timeout) | |
| return -EBUSY; | |
| adv = hci_find_adv_instance(hdev, instance); | |
| if (!adv) | |
| return -ENOENT; | |
| /* A zero timeout means unlimited advertising. As long as there is | |
| * only one instance, duration should be ignored. We still set a timeout | |
| * in case further instances are being added later on. | |
| * | |
| * If the remaining lifetime of the instance is more than the duration | |
| * then the timeout corresponds to the duration, otherwise it will be | |
| * reduced to the remaining instance lifetime. | |
| */ | |
| if (adv->timeout == 0 || adv->duration <= adv->remaining_time) | |
| timeout = adv->duration; | |
| else | |
| timeout = adv->remaining_time; | |
| /* The remaining time is being reduced unless the instance is being | |
| * advertised without time limit. | |
| */ | |
| if (adv->timeout) | |
| adv->remaining_time = adv->remaining_time - timeout; | |
| /* Only use work for scheduling instances with legacy advertising */ | |
| if (!ext_adv_capable(hdev)) { | |
| hdev->adv_instance_timeout = timeout; | |
| queue_delayed_work(hdev->req_workqueue, | |
| &hdev->adv_instance_expire, | |
| msecs_to_jiffies(timeout * 1000)); | |
| } | |
| /* If we're just re-scheduling the same instance again then do not | |
| * execute any HCI commands. This happens when a single instance is | |
| * being advertised. | |
| */ | |
| if (!force && hdev->cur_adv_instance == instance && | |
| hci_dev_test_flag(hdev, HCI_LE_ADV)) | |
| return 0; | |
| hdev->cur_adv_instance = instance; | |
| return hci_start_adv_sync(hdev, instance); | |
| } | |
| static int hci_clear_adv_sets_sync(struct hci_dev *hdev, struct sock *sk) | |
| { | |
| int err; | |
| if (!ext_adv_capable(hdev)) | |
| return 0; | |
| /* Disable instance 0x00 to disable all instances */ | |
| err = hci_disable_ext_adv_instance_sync(hdev, 0x00); | |
| if (err) | |
| return err; | |
| return __hci_cmd_sync_status_sk(hdev, HCI_OP_LE_CLEAR_ADV_SETS, | |
| 0, NULL, 0, HCI_CMD_TIMEOUT, sk); | |
| } | |
| static int hci_clear_adv_sync(struct hci_dev *hdev, struct sock *sk, bool force) | |
| { | |
| struct adv_info *adv, *n; | |
| if (ext_adv_capable(hdev)) | |
| /* Remove all existing sets */ | |
| return hci_clear_adv_sets_sync(hdev, sk); | |
| /* This is safe as long as there is no command send while the lock is | |
| * held. | |
| */ | |
| hci_dev_lock(hdev); | |
| /* Cleanup non-ext instances */ | |
| list_for_each_entry_safe(adv, n, &hdev->adv_instances, list) { | |
| u8 instance = adv->instance; | |
| int err; | |
| if (!(force || adv->timeout)) | |
| continue; | |
| err = hci_remove_adv_instance(hdev, instance); | |
| if (!err) | |
| mgmt_advertising_removed(sk, hdev, instance); | |
| } | |
| hci_dev_unlock(hdev); | |
| return 0; | |
| } | |
| static int hci_remove_adv_sync(struct hci_dev *hdev, u8 instance, | |
| struct sock *sk) | |
| { | |
| int err; | |
| /* If we use extended advertising, instance has to be removed first. */ | |
| if (ext_adv_capable(hdev)) | |
| return hci_remove_ext_adv_instance_sync(hdev, instance, sk); | |
| /* This is safe as long as there is no command send while the lock is | |
| * held. | |
| */ | |
| hci_dev_lock(hdev); | |
| err = hci_remove_adv_instance(hdev, instance); | |
| if (!err) | |
| mgmt_advertising_removed(sk, hdev, instance); | |
| hci_dev_unlock(hdev); | |
| return err; | |
| } | |
| /* For a single instance: | |
| * - force == true: The instance will be removed even when its remaining | |
| * lifetime is not zero. | |
| * - force == false: the instance will be deactivated but kept stored unless | |
| * the remaining lifetime is zero. | |
| * | |
| * For instance == 0x00: | |
| * - force == true: All instances will be removed regardless of their timeout | |
| * setting. | |
| * - force == false: Only instances that have a timeout will be removed. | |
| */ | |
| int hci_remove_advertising_sync(struct hci_dev *hdev, struct sock *sk, | |
| u8 instance, bool force) | |
| { | |
| struct adv_info *next = NULL; | |
| int err; | |
| /* Cancel any timeout concerning the removed instance(s). */ | |
| if (!instance || hdev->cur_adv_instance == instance) | |
| cancel_adv_timeout(hdev); | |
| /* Get the next instance to advertise BEFORE we remove | |
| * the current one. This can be the same instance again | |
| * if there is only one instance. | |
| */ | |
| if (hdev->cur_adv_instance == instance) | |
| next = hci_get_next_instance(hdev, instance); | |
| if (!instance) { | |
| err = hci_clear_adv_sync(hdev, sk, force); | |
| if (err) | |
| return err; | |
| } else { | |
| struct adv_info *adv = hci_find_adv_instance(hdev, instance); | |
| if (force || (adv && adv->timeout && !adv->remaining_time)) { | |
| /* Don't advertise a removed instance. */ | |
| if (next && next->instance == instance) | |
| next = NULL; | |
| err = hci_remove_adv_sync(hdev, instance, sk); | |
| if (err) | |
| return err; | |
| } | |
| } | |
| if (!hdev_is_powered(hdev) || hci_dev_test_flag(hdev, HCI_ADVERTISING)) | |
| return 0; | |
| if (next && !ext_adv_capable(hdev)) | |
| hci_schedule_adv_instance_sync(hdev, next->instance, false); | |
| return 0; | |
| } | |
| int hci_read_rssi_sync(struct hci_dev *hdev, __le16 handle) | |
| { | |
| struct hci_cp_read_rssi cp; | |
| cp.handle = handle; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_READ_RSSI, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| int hci_read_clock_sync(struct hci_dev *hdev, struct hci_cp_read_clock *cp) | |
| { | |
| return __hci_cmd_sync_status(hdev, HCI_OP_READ_CLOCK, | |
| sizeof(*cp), cp, HCI_CMD_TIMEOUT); | |
| } | |
| int hci_read_tx_power_sync(struct hci_dev *hdev, __le16 handle, u8 type) | |
| { | |
| struct hci_cp_read_tx_power cp; | |
| cp.handle = handle; | |
| cp.type = type; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_READ_TX_POWER, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| int hci_disable_advertising_sync(struct hci_dev *hdev) | |
| { | |
| u8 enable = 0x00; | |
| /* If controller is not advertising we are done. */ | |
| if (!hci_dev_test_flag(hdev, HCI_LE_ADV)) | |
| return 0; | |
| if (ext_adv_capable(hdev)) | |
| return hci_disable_ext_adv_instance_sync(hdev, 0x00); | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_ADV_ENABLE, | |
| sizeof(enable), &enable, HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_le_set_ext_scan_enable_sync(struct hci_dev *hdev, u8 val, | |
| u8 filter_dup) | |
| { | |
| struct hci_cp_le_set_ext_scan_enable cp; | |
| memset(&cp, 0, sizeof(cp)); | |
| cp.enable = val; | |
| if (hci_dev_test_flag(hdev, HCI_MESH)) | |
| cp.filter_dup = LE_SCAN_FILTER_DUP_DISABLE; | |
| else | |
| cp.filter_dup = filter_dup; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_EXT_SCAN_ENABLE, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_le_set_scan_enable_sync(struct hci_dev *hdev, u8 val, | |
| u8 filter_dup) | |
| { | |
| struct hci_cp_le_set_scan_enable cp; | |
| if (use_ext_scan(hdev)) | |
| return hci_le_set_ext_scan_enable_sync(hdev, val, filter_dup); | |
| memset(&cp, 0, sizeof(cp)); | |
| cp.enable = val; | |
| if (val && hci_dev_test_flag(hdev, HCI_MESH)) | |
| cp.filter_dup = LE_SCAN_FILTER_DUP_DISABLE; | |
| else | |
| cp.filter_dup = filter_dup; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_SCAN_ENABLE, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_le_set_addr_resolution_enable_sync(struct hci_dev *hdev, u8 val) | |
| { | |
| if (!use_ll_privacy(hdev)) | |
| return 0; | |
| /* If controller is not/already resolving we are done. */ | |
| if (val == hci_dev_test_flag(hdev, HCI_LL_RPA_RESOLUTION)) | |
| return 0; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_ADDR_RESOLV_ENABLE, | |
| sizeof(val), &val, HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_scan_disable_sync(struct hci_dev *hdev) | |
| { | |
| int err; | |
| /* If controller is not scanning we are done. */ | |
| if (!hci_dev_test_flag(hdev, HCI_LE_SCAN)) | |
| return 0; | |
| if (hdev->scanning_paused) { | |
| bt_dev_dbg(hdev, "Scanning is paused for suspend"); | |
| return 0; | |
| } | |
| err = hci_le_set_scan_enable_sync(hdev, LE_SCAN_DISABLE, 0x00); | |
| if (err) { | |
| bt_dev_err(hdev, "Unable to disable scanning: %d", err); | |
| return err; | |
| } | |
| return err; | |
| } | |
| static bool scan_use_rpa(struct hci_dev *hdev) | |
| { | |
| return hci_dev_test_flag(hdev, HCI_PRIVACY); | |
| } | |
| static void hci_start_interleave_scan(struct hci_dev *hdev) | |
| { | |
| hdev->interleave_scan_state = INTERLEAVE_SCAN_NO_FILTER; | |
| queue_delayed_work(hdev->req_workqueue, | |
| &hdev->interleave_scan, 0); | |
| } | |
| static bool is_interleave_scanning(struct hci_dev *hdev) | |
| { | |
| return hdev->interleave_scan_state != INTERLEAVE_SCAN_NONE; | |
| } | |
| static void cancel_interleave_scan(struct hci_dev *hdev) | |
| { | |
| bt_dev_dbg(hdev, "cancelling interleave scan"); | |
| cancel_delayed_work_sync(&hdev->interleave_scan); | |
| hdev->interleave_scan_state = INTERLEAVE_SCAN_NONE; | |
| } | |
| /* Return true if interleave_scan wasn't started until exiting this function, | |
| * otherwise, return false | |
| */ | |
| static bool hci_update_interleaved_scan_sync(struct hci_dev *hdev) | |
| { | |
| /* Do interleaved scan only if all of the following are true: | |
| * - There is at least one ADV monitor | |
| * - At least one pending LE connection or one device to be scanned for | |
| * - Monitor offloading is not supported | |
| * If so, we should alternate between allowlist scan and one without | |
| * any filters to save power. | |
| */ | |
| bool use_interleaving = hci_is_adv_monitoring(hdev) && | |
| !(list_empty(&hdev->pend_le_conns) && | |
| list_empty(&hdev->pend_le_reports)) && | |
| hci_get_adv_monitor_offload_ext(hdev) == | |
| HCI_ADV_MONITOR_EXT_NONE; | |
| bool is_interleaving = is_interleave_scanning(hdev); | |
| if (use_interleaving && !is_interleaving) { | |
| hci_start_interleave_scan(hdev); | |
| bt_dev_dbg(hdev, "starting interleave scan"); | |
| return true; | |
| } | |
| if (!use_interleaving && is_interleaving) | |
| cancel_interleave_scan(hdev); | |
| return false; | |
| } | |
| /* Removes connection to resolve list if needed.*/ | |
| static int hci_le_del_resolve_list_sync(struct hci_dev *hdev, | |
| bdaddr_t *bdaddr, u8 bdaddr_type) | |
| { | |
| struct hci_cp_le_del_from_resolv_list cp; | |
| struct bdaddr_list_with_irk *entry; | |
| if (!use_ll_privacy(hdev)) | |
| return 0; | |
| /* Check if the IRK has been programmed */ | |
| entry = hci_bdaddr_list_lookup_with_irk(&hdev->le_resolv_list, bdaddr, | |
| bdaddr_type); | |
| if (!entry) | |
| return 0; | |
| cp.bdaddr_type = bdaddr_type; | |
| bacpy(&cp.bdaddr, bdaddr); | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_DEL_FROM_RESOLV_LIST, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_le_del_accept_list_sync(struct hci_dev *hdev, | |
| bdaddr_t *bdaddr, u8 bdaddr_type) | |
| { | |
| struct hci_cp_le_del_from_accept_list cp; | |
| int err; | |
| /* Check if device is on accept list before removing it */ | |
| if (!hci_bdaddr_list_lookup(&hdev->le_accept_list, bdaddr, bdaddr_type)) | |
| return 0; | |
| cp.bdaddr_type = bdaddr_type; | |
| bacpy(&cp.bdaddr, bdaddr); | |
| /* Ignore errors when removing from resolving list as that is likely | |
| * that the device was never added. | |
| */ | |
| hci_le_del_resolve_list_sync(hdev, &cp.bdaddr, cp.bdaddr_type); | |
| err = __hci_cmd_sync_status(hdev, HCI_OP_LE_DEL_FROM_ACCEPT_LIST, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| if (err) { | |
| bt_dev_err(hdev, "Unable to remove from allow list: %d", err); | |
| return err; | |
| } | |
| bt_dev_dbg(hdev, "Remove %pMR (0x%x) from allow list", &cp.bdaddr, | |
| cp.bdaddr_type); | |
| return 0; | |
| } | |
| struct conn_params { | |
| bdaddr_t addr; | |
| u8 addr_type; | |
| hci_conn_flags_t flags; | |
| u8 privacy_mode; | |
| }; | |
| /* Adds connection to resolve list if needed. | |
| * Setting params to NULL programs local hdev->irk | |
| */ | |
| static int hci_le_add_resolve_list_sync(struct hci_dev *hdev, | |
| struct conn_params *params) | |
| { | |
| struct hci_cp_le_add_to_resolv_list cp; | |
| struct smp_irk *irk; | |
| struct bdaddr_list_with_irk *entry; | |
| struct hci_conn_params *p; | |
| if (!use_ll_privacy(hdev)) | |
| return 0; | |
| /* Attempt to program local identity address, type and irk if params is | |
| * NULL. | |
| */ | |
| if (!params) { | |
| if (!hci_dev_test_flag(hdev, HCI_PRIVACY)) | |
| return 0; | |
| hci_copy_identity_address(hdev, &cp.bdaddr, &cp.bdaddr_type); | |
| memcpy(cp.peer_irk, hdev->irk, 16); | |
| goto done; | |
| } | |
| irk = hci_find_irk_by_addr(hdev, ¶ms->addr, params->addr_type); | |
| if (!irk) | |
| return 0; | |
| /* Check if the IK has _not_ been programmed yet. */ | |
| entry = hci_bdaddr_list_lookup_with_irk(&hdev->le_resolv_list, | |
| ¶ms->addr, | |
| params->addr_type); | |
| if (entry) | |
| return 0; | |
| cp.bdaddr_type = params->addr_type; | |
| bacpy(&cp.bdaddr, ¶ms->addr); | |
| memcpy(cp.peer_irk, irk->val, 16); | |
| /* Default privacy mode is always Network */ | |
| params->privacy_mode = HCI_NETWORK_PRIVACY; | |
| rcu_read_lock(); | |
| p = hci_pend_le_action_lookup(&hdev->pend_le_conns, | |
| ¶ms->addr, params->addr_type); | |
| if (!p) | |
| p = hci_pend_le_action_lookup(&hdev->pend_le_reports, | |
| ¶ms->addr, params->addr_type); | |
| if (p) | |
| WRITE_ONCE(p->privacy_mode, HCI_NETWORK_PRIVACY); | |
| rcu_read_unlock(); | |
| done: | |
| if (hci_dev_test_flag(hdev, HCI_PRIVACY)) | |
| memcpy(cp.local_irk, hdev->irk, 16); | |
| else | |
| memset(cp.local_irk, 0, 16); | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_ADD_TO_RESOLV_LIST, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| /* Set Device Privacy Mode. */ | |
| static int hci_le_set_privacy_mode_sync(struct hci_dev *hdev, | |
| struct conn_params *params) | |
| { | |
| struct hci_cp_le_set_privacy_mode cp; | |
| struct smp_irk *irk; | |
| /* If device privacy mode has already been set there is nothing to do */ | |
| if (params->privacy_mode == HCI_DEVICE_PRIVACY) | |
| return 0; | |
| /* Check if HCI_CONN_FLAG_DEVICE_PRIVACY has been set as it also | |
| * indicates that LL Privacy has been enabled and | |
| * HCI_OP_LE_SET_PRIVACY_MODE is supported. | |
| */ | |
| if (!(params->flags & HCI_CONN_FLAG_DEVICE_PRIVACY)) | |
| return 0; | |
| irk = hci_find_irk_by_addr(hdev, ¶ms->addr, params->addr_type); | |
| if (!irk) | |
| return 0; | |
| memset(&cp, 0, sizeof(cp)); | |
| cp.bdaddr_type = irk->addr_type; | |
| bacpy(&cp.bdaddr, &irk->bdaddr); | |
| cp.mode = HCI_DEVICE_PRIVACY; | |
| /* Note: params->privacy_mode is not updated since it is a copy */ | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_PRIVACY_MODE, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| /* Adds connection to allow list if needed, if the device uses RPA (has IRK) | |
| * this attempts to program the device in the resolving list as well and | |
| * properly set the privacy mode. | |
| */ | |
| static int hci_le_add_accept_list_sync(struct hci_dev *hdev, | |
| struct conn_params *params, | |
| u8 *num_entries) | |
| { | |
| struct hci_cp_le_add_to_accept_list cp; | |
| int err; | |
| /* During suspend, only wakeable devices can be in acceptlist */ | |
| if (hdev->suspended && | |
| !(params->flags & HCI_CONN_FLAG_REMOTE_WAKEUP)) { | |
| hci_le_del_accept_list_sync(hdev, ¶ms->addr, | |
| params->addr_type); | |
| return 0; | |
| } | |
| /* Select filter policy to accept all advertising */ | |
| if (*num_entries >= hdev->le_accept_list_size) | |
| return -ENOSPC; | |
| /* Accept list can not be used with RPAs */ | |
| if (!use_ll_privacy(hdev) && | |
| hci_find_irk_by_addr(hdev, ¶ms->addr, params->addr_type)) | |
| return -EINVAL; | |
| /* Attempt to program the device in the resolving list first to avoid | |
| * having to rollback in case it fails since the resolving list is | |
| * dynamic it can probably be smaller than the accept list. | |
| */ | |
| err = hci_le_add_resolve_list_sync(hdev, params); | |
| if (err) { | |
| bt_dev_err(hdev, "Unable to add to resolve list: %d", err); | |
| return err; | |
| } | |
| /* Set Privacy Mode */ | |
| err = hci_le_set_privacy_mode_sync(hdev, params); | |
| if (err) { | |
| bt_dev_err(hdev, "Unable to set privacy mode: %d", err); | |
| return err; | |
| } | |
| /* Check if already in accept list */ | |
| if (hci_bdaddr_list_lookup(&hdev->le_accept_list, ¶ms->addr, | |
| params->addr_type)) | |
| return 0; | |
| *num_entries += 1; | |
| cp.bdaddr_type = params->addr_type; | |
| bacpy(&cp.bdaddr, ¶ms->addr); | |
| err = __hci_cmd_sync_status(hdev, HCI_OP_LE_ADD_TO_ACCEPT_LIST, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| if (err) { | |
| bt_dev_err(hdev, "Unable to add to allow list: %d", err); | |
| /* Rollback the device from the resolving list */ | |
| hci_le_del_resolve_list_sync(hdev, &cp.bdaddr, cp.bdaddr_type); | |
| return err; | |
| } | |
| bt_dev_dbg(hdev, "Add %pMR (0x%x) to allow list", &cp.bdaddr, | |
| cp.bdaddr_type); | |
| return 0; | |
| } | |
| /* This function disables/pause all advertising instances */ | |
| static int hci_pause_advertising_sync(struct hci_dev *hdev) | |
| { | |
| int err; | |
| int old_state; | |
| /* If controller is not advertising we are done. */ | |
| if (!hci_dev_test_flag(hdev, HCI_LE_ADV)) | |
| return 0; | |
| /* If already been paused there is nothing to do. */ | |
| if (hdev->advertising_paused) | |
| return 0; | |
| bt_dev_dbg(hdev, "Pausing directed advertising"); | |
| /* Stop directed advertising */ | |
| old_state = hci_dev_test_flag(hdev, HCI_ADVERTISING); | |
| if (old_state) { | |
| /* When discoverable timeout triggers, then just make sure | |
| * the limited discoverable flag is cleared. Even in the case | |
| * of a timeout triggered from general discoverable, it is | |
| * safe to unconditionally clear the flag. | |
| */ | |
| hci_dev_clear_flag(hdev, HCI_LIMITED_DISCOVERABLE); | |
| hci_dev_clear_flag(hdev, HCI_DISCOVERABLE); | |
| hdev->discov_timeout = 0; | |
| } | |
| bt_dev_dbg(hdev, "Pausing advertising instances"); | |
| /* Call to disable any advertisements active on the controller. | |
| * This will succeed even if no advertisements are configured. | |
| */ | |
| err = hci_disable_advertising_sync(hdev); | |
| if (err) | |
| return err; | |
| /* If we are using software rotation, pause the loop */ | |
| if (!ext_adv_capable(hdev)) | |
| cancel_adv_timeout(hdev); | |
| hdev->advertising_paused = true; | |
| hdev->advertising_old_state = old_state; | |
| return 0; | |
| } | |
| /* This function enables all user advertising instances */ | |
| static int hci_resume_advertising_sync(struct hci_dev *hdev) | |
| { | |
| struct adv_info *adv, *tmp; | |
| int err; | |
| /* If advertising has not been paused there is nothing to do. */ | |
| if (!hdev->advertising_paused) | |
| return 0; | |
| /* Resume directed advertising */ | |
| hdev->advertising_paused = false; | |
| if (hdev->advertising_old_state) { | |
| hci_dev_set_flag(hdev, HCI_ADVERTISING); | |
| hdev->advertising_old_state = 0; | |
| } | |
| bt_dev_dbg(hdev, "Resuming advertising instances"); | |
| if (ext_adv_capable(hdev)) { | |
| /* Call for each tracked instance to be re-enabled */ | |
| list_for_each_entry_safe(adv, tmp, &hdev->adv_instances, list) { | |
| err = hci_enable_ext_advertising_sync(hdev, | |
| adv->instance); | |
| if (!err) | |
| continue; | |
| /* If the instance cannot be resumed remove it */ | |
| hci_remove_ext_adv_instance_sync(hdev, adv->instance, | |
| NULL); | |
| } | |
| /* If current advertising instance is set to instance 0x00 | |
| * then we need to re-enable it. | |
| */ | |
| if (hci_dev_test_and_clear_flag(hdev, HCI_LE_ADV_0)) | |
| err = hci_enable_ext_advertising_sync(hdev, 0x00); | |
| } else { | |
| /* Schedule for most recent instance to be restarted and begin | |
| * the software rotation loop | |
| */ | |
| err = hci_schedule_adv_instance_sync(hdev, | |
| hdev->cur_adv_instance, | |
| true); | |
| } | |
| hdev->advertising_paused = false; | |
| return err; | |
| } | |
| static int hci_pause_addr_resolution(struct hci_dev *hdev) | |
| { | |
| int err; | |
| if (!use_ll_privacy(hdev)) | |
| return 0; | |
| if (!hci_dev_test_flag(hdev, HCI_LL_RPA_RESOLUTION)) | |
| return 0; | |
| /* Cannot disable addr resolution if scanning is enabled or | |
| * when initiating an LE connection. | |
| */ | |
| if (hci_dev_test_flag(hdev, HCI_LE_SCAN) || | |
| hci_lookup_le_connect(hdev)) { | |
| bt_dev_err(hdev, "Command not allowed when scan/LE connect"); | |
| return -EPERM; | |
| } | |
| /* Cannot disable addr resolution if advertising is enabled. */ | |
| err = hci_pause_advertising_sync(hdev); | |
| if (err) { | |
| bt_dev_err(hdev, "Pause advertising failed: %d", err); | |
| return err; | |
| } | |
| err = hci_le_set_addr_resolution_enable_sync(hdev, 0x00); | |
| if (err) | |
| bt_dev_err(hdev, "Unable to disable Address Resolution: %d", | |
| err); | |
| /* Return if address resolution is disabled and RPA is not used. */ | |
| if (!err && scan_use_rpa(hdev)) | |
| return 0; | |
| hci_resume_advertising_sync(hdev); | |
| return err; | |
| } | |
| struct sk_buff *hci_read_local_oob_data_sync(struct hci_dev *hdev, | |
| bool extended, struct sock *sk) | |
| { | |
| u16 opcode = extended ? HCI_OP_READ_LOCAL_OOB_EXT_DATA : | |
| HCI_OP_READ_LOCAL_OOB_DATA; | |
| return __hci_cmd_sync_sk(hdev, opcode, 0, NULL, 0, HCI_CMD_TIMEOUT, sk); | |
| } | |
| static struct conn_params *conn_params_copy(struct list_head *list, size_t *n) | |
| { | |
| struct hci_conn_params *params; | |
| struct conn_params *p; | |
| size_t i; | |
| rcu_read_lock(); | |
| i = 0; | |
| list_for_each_entry_rcu(params, list, action) | |
| ++i; | |
| *n = i; | |
| rcu_read_unlock(); | |
| p = kvcalloc(*n, sizeof(struct conn_params), GFP_KERNEL); | |
| if (!p) | |
| return NULL; | |
| rcu_read_lock(); | |
| i = 0; | |
| list_for_each_entry_rcu(params, list, action) { | |
| /* Racing adds are handled in next scan update */ | |
| if (i >= *n) | |
| break; | |
| /* No hdev->lock, but: addr, addr_type are immutable. | |
| * privacy_mode is only written by us or in | |
| * hci_cc_le_set_privacy_mode that we wait for. | |
| * We should be idempotent so MGMT updating flags | |
| * while we are processing is OK. | |
| */ | |
| bacpy(&p[i].addr, ¶ms->addr); | |
| p[i].addr_type = params->addr_type; | |
| p[i].flags = READ_ONCE(params->flags); | |
| p[i].privacy_mode = READ_ONCE(params->privacy_mode); | |
| ++i; | |
| } | |
| rcu_read_unlock(); | |
| *n = i; | |
| return p; | |
| } | |
| /* Device must not be scanning when updating the accept list. | |
| * | |
| * Update is done using the following sequence: | |
| * | |
| * use_ll_privacy((Disable Advertising) -> Disable Resolving List) -> | |
| * Remove Devices From Accept List -> | |
| * (has IRK && use_ll_privacy(Remove Devices From Resolving List))-> | |
| * Add Devices to Accept List -> | |
| * (has IRK && use_ll_privacy(Remove Devices From Resolving List)) -> | |
| * use_ll_privacy(Enable Resolving List -> (Enable Advertising)) -> | |
| * Enable Scanning | |
| * | |
| * In case of failure advertising shall be restored to its original state and | |
| * return would disable accept list since either accept or resolving list could | |
| * not be programmed. | |
| * | |
| */ | |
| static u8 hci_update_accept_list_sync(struct hci_dev *hdev) | |
| { | |
| struct conn_params *params; | |
| struct bdaddr_list *b, *t; | |
| u8 num_entries = 0; | |
| bool pend_conn, pend_report; | |
| u8 filter_policy; | |
| size_t i, n; | |
| int err; | |
| /* Pause advertising if resolving list can be used as controllers | |
| * cannot accept resolving list modifications while advertising. | |
| */ | |
| if (use_ll_privacy(hdev)) { | |
| err = hci_pause_advertising_sync(hdev); | |
| if (err) { | |
| bt_dev_err(hdev, "pause advertising failed: %d", err); | |
| return 0x00; | |
| } | |
| } | |
| /* Disable address resolution while reprogramming accept list since | |
| * devices that do have an IRK will be programmed in the resolving list | |
| * when LL Privacy is enabled. | |
| */ | |
| err = hci_le_set_addr_resolution_enable_sync(hdev, 0x00); | |
| if (err) { | |
| bt_dev_err(hdev, "Unable to disable LL privacy: %d", err); | |
| goto done; | |
| } | |
| /* Go through the current accept list programmed into the | |
| * controller one by one and check if that address is connected or is | |
| * still in the list of pending connections or list of devices to | |
| * report. If not present in either list, then remove it from | |
| * the controller. | |
| */ | |
| list_for_each_entry_safe(b, t, &hdev->le_accept_list, list) { | |
| if (hci_conn_hash_lookup_le(hdev, &b->bdaddr, b->bdaddr_type)) | |
| continue; | |
| /* Pointers not dereferenced, no locks needed */ | |
| pend_conn = hci_pend_le_action_lookup(&hdev->pend_le_conns, | |
| &b->bdaddr, | |
| b->bdaddr_type); | |
| pend_report = hci_pend_le_action_lookup(&hdev->pend_le_reports, | |
| &b->bdaddr, | |
| b->bdaddr_type); | |
| /* If the device is not likely to connect or report, | |
| * remove it from the acceptlist. | |
| */ | |
| if (!pend_conn && !pend_report) { | |
| hci_le_del_accept_list_sync(hdev, &b->bdaddr, | |
| b->bdaddr_type); | |
| continue; | |
| } | |
| num_entries++; | |
| } | |
| /* Since all no longer valid accept list entries have been | |
| * removed, walk through the list of pending connections | |
| * and ensure that any new device gets programmed into | |
| * the controller. | |
| * | |
| * If the list of the devices is larger than the list of | |
| * available accept list entries in the controller, then | |
| * just abort and return filer policy value to not use the | |
| * accept list. | |
| * | |
| * The list and params may be mutated while we wait for events, | |
| * so make a copy and iterate it. | |
| */ | |
| params = conn_params_copy(&hdev->pend_le_conns, &n); | |
| if (!params) { | |
| err = -ENOMEM; | |
| goto done; | |
| } | |
| for (i = 0; i < n; ++i) { | |
| err = hci_le_add_accept_list_sync(hdev, ¶ms[i], | |
| &num_entries); | |
| if (err) { | |
| kvfree(params); | |
| goto done; | |
| } | |
| } | |
| kvfree(params); | |
| /* After adding all new pending connections, walk through | |
| * the list of pending reports and also add these to the | |
| * accept list if there is still space. Abort if space runs out. | |
| */ | |
| params = conn_params_copy(&hdev->pend_le_reports, &n); | |
| if (!params) { | |
| err = -ENOMEM; | |
| goto done; | |
| } | |
| for (i = 0; i < n; ++i) { | |
| err = hci_le_add_accept_list_sync(hdev, ¶ms[i], | |
| &num_entries); | |
| if (err) { | |
| kvfree(params); | |
| goto done; | |
| } | |
| } | |
| kvfree(params); | |
| /* Use the allowlist unless the following conditions are all true: | |
| * - We are not currently suspending | |
| * - There are 1 or more ADV monitors registered and it's not offloaded | |
| * - Interleaved scanning is not currently using the allowlist | |
| */ | |
| if (!idr_is_empty(&hdev->adv_monitors_idr) && !hdev->suspended && | |
| hci_get_adv_monitor_offload_ext(hdev) == HCI_ADV_MONITOR_EXT_NONE && | |
| hdev->interleave_scan_state != INTERLEAVE_SCAN_ALLOWLIST) | |
| err = -EINVAL; | |
| done: | |
| filter_policy = err ? 0x00 : 0x01; | |
| /* Enable address resolution when LL Privacy is enabled. */ | |
| err = hci_le_set_addr_resolution_enable_sync(hdev, 0x01); | |
| if (err) | |
| bt_dev_err(hdev, "Unable to enable LL privacy: %d", err); | |
| /* Resume advertising if it was paused */ | |
| if (use_ll_privacy(hdev)) | |
| hci_resume_advertising_sync(hdev); | |
| /* Select filter policy to use accept list */ | |
| return filter_policy; | |
| } | |
| static void hci_le_scan_phy_params(struct hci_cp_le_scan_phy_params *cp, | |
| u8 type, u16 interval, u16 window) | |
| { | |
| cp->type = type; | |
| cp->interval = cpu_to_le16(interval); | |
| cp->window = cpu_to_le16(window); | |
| } | |
| static int hci_le_set_ext_scan_param_sync(struct hci_dev *hdev, u8 type, | |
| u16 interval, u16 window, | |
| u8 own_addr_type, u8 filter_policy) | |
| { | |
| struct hci_cp_le_set_ext_scan_params *cp; | |
| struct hci_cp_le_scan_phy_params *phy; | |
| u8 data[sizeof(*cp) + sizeof(*phy) * 2]; | |
| u8 num_phy = 0x00; | |
| cp = (void *)data; | |
| phy = (void *)cp->data; | |
| memset(data, 0, sizeof(data)); | |
| cp->own_addr_type = own_addr_type; | |
| cp->filter_policy = filter_policy; | |
| /* Check if PA Sync is in progress then select the PHY based on the | |
| * hci_conn.iso_qos. | |
| */ | |
| if (hci_dev_test_flag(hdev, HCI_PA_SYNC)) { | |
| struct hci_cp_le_add_to_accept_list *sent; | |
| sent = hci_sent_cmd_data(hdev, HCI_OP_LE_ADD_TO_ACCEPT_LIST); | |
| if (sent) { | |
| struct hci_conn *conn; | |
| conn = hci_conn_hash_lookup_ba(hdev, ISO_LINK, | |
| &sent->bdaddr); | |
| if (conn) { | |
| struct bt_iso_qos *qos = &conn->iso_qos; | |
| if (qos->bcast.in.phy & BT_ISO_PHY_1M || | |
| qos->bcast.in.phy & BT_ISO_PHY_2M) { | |
| cp->scanning_phys |= LE_SCAN_PHY_1M; | |
| hci_le_scan_phy_params(phy, type, | |
| interval, | |
| window); | |
| num_phy++; | |
| phy++; | |
| } | |
| if (qos->bcast.in.phy & BT_ISO_PHY_CODED) { | |
| cp->scanning_phys |= LE_SCAN_PHY_CODED; | |
| hci_le_scan_phy_params(phy, type, | |
| interval * 3, | |
| window * 3); | |
| num_phy++; | |
| phy++; | |
| } | |
| if (num_phy) | |
| goto done; | |
| } | |
| } | |
| } | |
| if (scan_1m(hdev) || scan_2m(hdev)) { | |
| cp->scanning_phys |= LE_SCAN_PHY_1M; | |
| hci_le_scan_phy_params(phy, type, interval, window); | |
| num_phy++; | |
| phy++; | |
| } | |
| if (scan_coded(hdev)) { | |
| cp->scanning_phys |= LE_SCAN_PHY_CODED; | |
| hci_le_scan_phy_params(phy, type, interval * 3, window * 3); | |
| num_phy++; | |
| phy++; | |
| } | |
| done: | |
| if (!num_phy) | |
| return -EINVAL; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_EXT_SCAN_PARAMS, | |
| sizeof(*cp) + sizeof(*phy) * num_phy, | |
| data, HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_le_set_scan_param_sync(struct hci_dev *hdev, u8 type, | |
| u16 interval, u16 window, | |
| u8 own_addr_type, u8 filter_policy) | |
| { | |
| struct hci_cp_le_set_scan_param cp; | |
| if (use_ext_scan(hdev)) | |
| return hci_le_set_ext_scan_param_sync(hdev, type, interval, | |
| window, own_addr_type, | |
| filter_policy); | |
| memset(&cp, 0, sizeof(cp)); | |
| cp.type = type; | |
| cp.interval = cpu_to_le16(interval); | |
| cp.window = cpu_to_le16(window); | |
| cp.own_address_type = own_addr_type; | |
| cp.filter_policy = filter_policy; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_SCAN_PARAM, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_start_scan_sync(struct hci_dev *hdev, u8 type, u16 interval, | |
| u16 window, u8 own_addr_type, u8 filter_policy, | |
| u8 filter_dup) | |
| { | |
| int err; | |
| if (hdev->scanning_paused) { | |
| bt_dev_dbg(hdev, "Scanning is paused for suspend"); | |
| return 0; | |
| } | |
| err = hci_le_set_scan_param_sync(hdev, type, interval, window, | |
| own_addr_type, filter_policy); | |
| if (err) | |
| return err; | |
| return hci_le_set_scan_enable_sync(hdev, LE_SCAN_ENABLE, filter_dup); | |
| } | |
| static int hci_passive_scan_sync(struct hci_dev *hdev) | |
| { | |
| u8 own_addr_type; | |
| u8 filter_policy; | |
| u16 window, interval; | |
| u8 filter_dups = LE_SCAN_FILTER_DUP_ENABLE; | |
| int err; | |
| if (hdev->scanning_paused) { | |
| bt_dev_dbg(hdev, "Scanning is paused for suspend"); | |
| return 0; | |
| } | |
| err = hci_scan_disable_sync(hdev); | |
| if (err) { | |
| bt_dev_err(hdev, "disable scanning failed: %d", err); | |
| return err; | |
| } | |
| /* Set require_privacy to false since no SCAN_REQ are send | |
| * during passive scanning. Not using an non-resolvable address | |
| * here is important so that peer devices using direct | |
| * advertising with our address will be correctly reported | |
| * by the controller. | |
| */ | |
| if (hci_update_random_address_sync(hdev, false, scan_use_rpa(hdev), | |
| &own_addr_type)) | |
| return 0; | |
| if (hdev->enable_advmon_interleave_scan && | |
| hci_update_interleaved_scan_sync(hdev)) | |
| return 0; | |
| bt_dev_dbg(hdev, "interleave state %d", hdev->interleave_scan_state); | |
| /* Adding or removing entries from the accept list must | |
| * happen before enabling scanning. The controller does | |
| * not allow accept list modification while scanning. | |
| */ | |
| filter_policy = hci_update_accept_list_sync(hdev); | |
| /* If suspended and filter_policy set to 0x00 (no acceptlist) then | |
| * passive scanning cannot be started since that would require the host | |
| * to be woken up to process the reports. | |
| */ | |
| if (hdev->suspended && !filter_policy) { | |
| /* Check if accept list is empty then there is no need to scan | |
| * while suspended. | |
| */ | |
| if (list_empty(&hdev->le_accept_list)) | |
| return 0; | |
| /* If there are devices is the accept_list that means some | |
| * devices could not be programmed which in non-suspended case | |
| * means filter_policy needs to be set to 0x00 so the host needs | |
| * to filter, but since this is treating suspended case we | |
| * can ignore device needing host to filter to allow devices in | |
| * the acceptlist to be able to wakeup the system. | |
| */ | |
| filter_policy = 0x01; | |
| } | |
| /* When the controller is using random resolvable addresses and | |
| * with that having LE privacy enabled, then controllers with | |
| * Extended Scanner Filter Policies support can now enable support | |
| * for handling directed advertising. | |
| * | |
| * So instead of using filter polices 0x00 (no acceptlist) | |
| * and 0x01 (acceptlist enabled) use the new filter policies | |
| * 0x02 (no acceptlist) and 0x03 (acceptlist enabled). | |
| */ | |
| if (hci_dev_test_flag(hdev, HCI_PRIVACY) && | |
| (hdev->le_features[0] & HCI_LE_EXT_SCAN_POLICY)) | |
| filter_policy |= 0x02; | |
| if (hdev->suspended) { | |
| window = hdev->le_scan_window_suspend; | |
| interval = hdev->le_scan_int_suspend; | |
| } else if (hci_is_le_conn_scanning(hdev)) { | |
| window = hdev->le_scan_window_connect; | |
| interval = hdev->le_scan_int_connect; | |
| } else if (hci_is_adv_monitoring(hdev)) { | |
| window = hdev->le_scan_window_adv_monitor; | |
| interval = hdev->le_scan_int_adv_monitor; | |
| /* Disable duplicates filter when scanning for advertisement | |
| * monitor for the following reasons. | |
| * | |
| * For HW pattern filtering (ex. MSFT), Realtek and Qualcomm | |
| * controllers ignore RSSI_Sampling_Period when the duplicates | |
| * filter is enabled. | |
| * | |
| * For SW pattern filtering, when we're not doing interleaved | |
| * scanning, it is necessary to disable duplicates filter, | |
| * otherwise hosts can only receive one advertisement and it's | |
| * impossible to know if a peer is still in range. | |
| */ | |
| filter_dups = LE_SCAN_FILTER_DUP_DISABLE; | |
| } else { | |
| window = hdev->le_scan_window; | |
| interval = hdev->le_scan_interval; | |
| } | |
| /* Disable all filtering for Mesh */ | |
| if (hci_dev_test_flag(hdev, HCI_MESH)) { | |
| filter_policy = 0; | |
| filter_dups = LE_SCAN_FILTER_DUP_DISABLE; | |
| } | |
| bt_dev_dbg(hdev, "LE passive scan with acceptlist = %d", filter_policy); | |
| return hci_start_scan_sync(hdev, LE_SCAN_PASSIVE, interval, window, | |
| own_addr_type, filter_policy, filter_dups); | |
| } | |
| /* This function controls the passive scanning based on hdev->pend_le_conns | |
| * list. If there are pending LE connection we start the background scanning, | |
| * otherwise we stop it in the following sequence: | |
| * | |
| * If there are devices to scan: | |
| * | |
| * Disable Scanning -> Update Accept List -> | |
| * use_ll_privacy((Disable Advertising) -> Disable Resolving List -> | |
| * Update Resolving List -> Enable Resolving List -> (Enable Advertising)) -> | |
| * Enable Scanning | |
| * | |
| * Otherwise: | |
| * | |
| * Disable Scanning | |
| */ | |
| int hci_update_passive_scan_sync(struct hci_dev *hdev) | |
| { | |
| int err; | |
| if (!test_bit(HCI_UP, &hdev->flags) || | |
| test_bit(HCI_INIT, &hdev->flags) || | |
| hci_dev_test_flag(hdev, HCI_SETUP) || | |
| hci_dev_test_flag(hdev, HCI_CONFIG) || | |
| hci_dev_test_flag(hdev, HCI_AUTO_OFF) || | |
| hci_dev_test_flag(hdev, HCI_UNREGISTER)) | |
| return 0; | |
| /* No point in doing scanning if LE support hasn't been enabled */ | |
| if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED)) | |
| return 0; | |
| /* If discovery is active don't interfere with it */ | |
| if (hdev->discovery.state != DISCOVERY_STOPPED) | |
| return 0; | |
| /* Reset RSSI and UUID filters when starting background scanning | |
| * since these filters are meant for service discovery only. | |
| * | |
| * The Start Discovery and Start Service Discovery operations | |
| * ensure to set proper values for RSSI threshold and UUID | |
| * filter list. So it is safe to just reset them here. | |
| */ | |
| hci_discovery_filter_clear(hdev); | |
| bt_dev_dbg(hdev, "ADV monitoring is %s", | |
| hci_is_adv_monitoring(hdev) ? "on" : "off"); | |
| if (!hci_dev_test_flag(hdev, HCI_MESH) && | |
| list_empty(&hdev->pend_le_conns) && | |
| list_empty(&hdev->pend_le_reports) && | |
| !hci_is_adv_monitoring(hdev) && | |
| !hci_dev_test_flag(hdev, HCI_PA_SYNC)) { | |
| /* If there is no pending LE connections or devices | |
| * to be scanned for or no ADV monitors, we should stop the | |
| * background scanning. | |
| */ | |
| bt_dev_dbg(hdev, "stopping background scanning"); | |
| err = hci_scan_disable_sync(hdev); | |
| if (err) | |
| bt_dev_err(hdev, "stop background scanning failed: %d", | |
| err); | |
| } else { | |
| /* If there is at least one pending LE connection, we should | |
| * keep the background scan running. | |
| */ | |
| /* If controller is connecting, we should not start scanning | |
| * since some controllers are not able to scan and connect at | |
| * the same time. | |
| */ | |
| if (hci_lookup_le_connect(hdev)) | |
| return 0; | |
| bt_dev_dbg(hdev, "start background scanning"); | |
| err = hci_passive_scan_sync(hdev); | |
| if (err) | |
| bt_dev_err(hdev, "start background scanning failed: %d", | |
| err); | |
| } | |
| return err; | |
| } | |
| static int update_scan_sync(struct hci_dev *hdev, void *data) | |
| { | |
| return hci_update_scan_sync(hdev); | |
| } | |
| int hci_update_scan(struct hci_dev *hdev) | |
| { | |
| return hci_cmd_sync_queue(hdev, update_scan_sync, NULL, NULL); | |
| } | |
| static int update_passive_scan_sync(struct hci_dev *hdev, void *data) | |
| { | |
| return hci_update_passive_scan_sync(hdev); | |
| } | |
| int hci_update_passive_scan(struct hci_dev *hdev) | |
| { | |
| /* Only queue if it would have any effect */ | |
| if (!test_bit(HCI_UP, &hdev->flags) || | |
| test_bit(HCI_INIT, &hdev->flags) || | |
| hci_dev_test_flag(hdev, HCI_SETUP) || | |
| hci_dev_test_flag(hdev, HCI_CONFIG) || | |
| hci_dev_test_flag(hdev, HCI_AUTO_OFF) || | |
| hci_dev_test_flag(hdev, HCI_UNREGISTER)) | |
| return 0; | |
| return hci_cmd_sync_queue_once(hdev, update_passive_scan_sync, NULL, | |
| NULL); | |
| } | |
| int hci_write_sc_support_sync(struct hci_dev *hdev, u8 val) | |
| { | |
| int err; | |
| if (!bredr_sc_enabled(hdev) || lmp_host_sc_capable(hdev)) | |
| return 0; | |
| err = __hci_cmd_sync_status(hdev, HCI_OP_WRITE_SC_SUPPORT, | |
| sizeof(val), &val, HCI_CMD_TIMEOUT); | |
| if (!err) { | |
| if (val) { | |
| hdev->features[1][0] |= LMP_HOST_SC; | |
| hci_dev_set_flag(hdev, HCI_SC_ENABLED); | |
| } else { | |
| hdev->features[1][0] &= ~LMP_HOST_SC; | |
| hci_dev_clear_flag(hdev, HCI_SC_ENABLED); | |
| } | |
| } | |
| return err; | |
| } | |
| int hci_write_ssp_mode_sync(struct hci_dev *hdev, u8 mode) | |
| { | |
| int err; | |
| if (!hci_dev_test_flag(hdev, HCI_SSP_ENABLED) || | |
| lmp_host_ssp_capable(hdev)) | |
| return 0; | |
| if (!mode && hci_dev_test_flag(hdev, HCI_USE_DEBUG_KEYS)) { | |
| __hci_cmd_sync_status(hdev, HCI_OP_WRITE_SSP_DEBUG_MODE, | |
| sizeof(mode), &mode, HCI_CMD_TIMEOUT); | |
| } | |
| err = __hci_cmd_sync_status(hdev, HCI_OP_WRITE_SSP_MODE, | |
| sizeof(mode), &mode, HCI_CMD_TIMEOUT); | |
| if (err) | |
| return err; | |
| return hci_write_sc_support_sync(hdev, 0x01); | |
| } | |
| int hci_write_le_host_supported_sync(struct hci_dev *hdev, u8 le, u8 simul) | |
| { | |
| struct hci_cp_write_le_host_supported cp; | |
| if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED) || | |
| !lmp_bredr_capable(hdev)) | |
| return 0; | |
| /* Check first if we already have the right host state | |
| * (host features set) | |
| */ | |
| if (le == lmp_host_le_capable(hdev) && | |
| simul == lmp_host_le_br_capable(hdev)) | |
| return 0; | |
| memset(&cp, 0, sizeof(cp)); | |
| cp.le = le; | |
| cp.simul = simul; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_WRITE_LE_HOST_SUPPORTED, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_powered_update_adv_sync(struct hci_dev *hdev) | |
| { | |
| struct adv_info *adv, *tmp; | |
| int err; | |
| if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED)) | |
| return 0; | |
| /* If RPA Resolution has not been enable yet it means the | |
| * resolving list is empty and we should attempt to program the | |
| * local IRK in order to support using own_addr_type | |
| * ADDR_LE_DEV_RANDOM_RESOLVED (0x03). | |
| */ | |
| if (!hci_dev_test_flag(hdev, HCI_LL_RPA_RESOLUTION)) { | |
| hci_le_add_resolve_list_sync(hdev, NULL); | |
| hci_le_set_addr_resolution_enable_sync(hdev, 0x01); | |
| } | |
| /* Make sure the controller has a good default for | |
| * advertising data. This also applies to the case | |
| * where BR/EDR was toggled during the AUTO_OFF phase. | |
| */ | |
| if (hci_dev_test_flag(hdev, HCI_ADVERTISING) && | |
| list_empty(&hdev->adv_instances)) { | |
| if (ext_adv_capable(hdev)) { | |
| err = hci_setup_ext_adv_instance_sync(hdev, 0x00); | |
| if (!err) | |
| hci_update_scan_rsp_data_sync(hdev, 0x00); | |
| } else { | |
| err = hci_update_adv_data_sync(hdev, 0x00); | |
| if (!err) | |
| hci_update_scan_rsp_data_sync(hdev, 0x00); | |
| } | |
| if (hci_dev_test_flag(hdev, HCI_ADVERTISING)) | |
| hci_enable_advertising_sync(hdev); | |
| } | |
| /* Call for each tracked instance to be scheduled */ | |
| list_for_each_entry_safe(adv, tmp, &hdev->adv_instances, list) | |
| hci_schedule_adv_instance_sync(hdev, adv->instance, true); | |
| return 0; | |
| } | |
| static int hci_write_auth_enable_sync(struct hci_dev *hdev) | |
| { | |
| u8 link_sec; | |
| link_sec = hci_dev_test_flag(hdev, HCI_LINK_SECURITY); | |
| if (link_sec == test_bit(HCI_AUTH, &hdev->flags)) | |
| return 0; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_WRITE_AUTH_ENABLE, | |
| sizeof(link_sec), &link_sec, | |
| HCI_CMD_TIMEOUT); | |
| } | |
| int hci_write_fast_connectable_sync(struct hci_dev *hdev, bool enable) | |
| { | |
| struct hci_cp_write_page_scan_activity cp; | |
| u8 type; | |
| int err = 0; | |
| if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) | |
| return 0; | |
| if (hdev->hci_ver < BLUETOOTH_VER_1_2) | |
| return 0; | |
| memset(&cp, 0, sizeof(cp)); | |
| if (enable) { | |
| type = PAGE_SCAN_TYPE_INTERLACED; | |
| /* 160 msec page scan interval */ | |
| cp.interval = cpu_to_le16(0x0100); | |
| } else { | |
| type = hdev->def_page_scan_type; | |
| cp.interval = cpu_to_le16(hdev->def_page_scan_int); | |
| } | |
| cp.window = cpu_to_le16(hdev->def_page_scan_window); | |
| if (__cpu_to_le16(hdev->page_scan_interval) != cp.interval || | |
| __cpu_to_le16(hdev->page_scan_window) != cp.window) { | |
| err = __hci_cmd_sync_status(hdev, | |
| HCI_OP_WRITE_PAGE_SCAN_ACTIVITY, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| if (err) | |
| return err; | |
| } | |
| if (hdev->page_scan_type != type) | |
| err = __hci_cmd_sync_status(hdev, | |
| HCI_OP_WRITE_PAGE_SCAN_TYPE, | |
| sizeof(type), &type, | |
| HCI_CMD_TIMEOUT); | |
| return err; | |
| } | |
| static bool disconnected_accept_list_entries(struct hci_dev *hdev) | |
| { | |
| struct bdaddr_list *b; | |
| list_for_each_entry(b, &hdev->accept_list, list) { | |
| struct hci_conn *conn; | |
| conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &b->bdaddr); | |
| if (!conn) | |
| return true; | |
| if (conn->state != BT_CONNECTED && conn->state != BT_CONFIG) | |
| return true; | |
| } | |
| return false; | |
| } | |
| static int hci_write_scan_enable_sync(struct hci_dev *hdev, u8 val) | |
| { | |
| return __hci_cmd_sync_status(hdev, HCI_OP_WRITE_SCAN_ENABLE, | |
| sizeof(val), &val, | |
| HCI_CMD_TIMEOUT); | |
| } | |
| int hci_update_scan_sync(struct hci_dev *hdev) | |
| { | |
| u8 scan; | |
| if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) | |
| return 0; | |
| if (!hdev_is_powered(hdev)) | |
| return 0; | |
| if (mgmt_powering_down(hdev)) | |
| return 0; | |
| if (hdev->scanning_paused) | |
| return 0; | |
| if (hci_dev_test_flag(hdev, HCI_CONNECTABLE) || | |
| disconnected_accept_list_entries(hdev)) | |
| scan = SCAN_PAGE; | |
| else | |
| scan = SCAN_DISABLED; | |
| if (hci_dev_test_flag(hdev, HCI_DISCOVERABLE)) | |
| scan |= SCAN_INQUIRY; | |
| if (test_bit(HCI_PSCAN, &hdev->flags) == !!(scan & SCAN_PAGE) && | |
| test_bit(HCI_ISCAN, &hdev->flags) == !!(scan & SCAN_INQUIRY)) | |
| return 0; | |
| return hci_write_scan_enable_sync(hdev, scan); | |
| } | |
| int hci_update_name_sync(struct hci_dev *hdev, const u8 *name) | |
| { | |
| struct hci_cp_write_local_name cp; | |
| memset(&cp, 0, sizeof(cp)); | |
| memcpy(cp.name, name, sizeof(cp.name)); | |
| return __hci_cmd_sync_status(hdev, HCI_OP_WRITE_LOCAL_NAME, | |
| sizeof(cp), &cp, | |
| HCI_CMD_TIMEOUT); | |
| } | |
| /* This function perform powered update HCI command sequence after the HCI init | |
| * sequence which end up resetting all states, the sequence is as follows: | |
| * | |
| * HCI_SSP_ENABLED(Enable SSP) | |
| * HCI_LE_ENABLED(Enable LE) | |
| * HCI_LE_ENABLED(use_ll_privacy(Add local IRK to Resolving List) -> | |
| * Update adv data) | |
| * Enable Authentication | |
| * lmp_bredr_capable(Set Fast Connectable -> Set Scan Type -> Set Class -> | |
| * Set Name -> Set EIR) | |
| * HCI_FORCE_STATIC_ADDR | BDADDR_ANY && !HCI_BREDR_ENABLED (Set Static Address) | |
| */ | |
| int hci_powered_update_sync(struct hci_dev *hdev) | |
| { | |
| int err; | |
| /* Register the available SMP channels (BR/EDR and LE) only when | |
| * successfully powering on the controller. This late | |
| * registration is required so that LE SMP can clearly decide if | |
| * the public address or static address is used. | |
| */ | |
| smp_register(hdev); | |
| err = hci_write_ssp_mode_sync(hdev, 0x01); | |
| if (err) | |
| return err; | |
| err = hci_write_le_host_supported_sync(hdev, 0x01, 0x00); | |
| if (err) | |
| return err; | |
| err = hci_powered_update_adv_sync(hdev); | |
| if (err) | |
| return err; | |
| err = hci_write_auth_enable_sync(hdev); | |
| if (err) | |
| return err; | |
| if (lmp_bredr_capable(hdev)) { | |
| if (hci_dev_test_flag(hdev, HCI_FAST_CONNECTABLE)) | |
| hci_write_fast_connectable_sync(hdev, true); | |
| else | |
| hci_write_fast_connectable_sync(hdev, false); | |
| hci_update_scan_sync(hdev); | |
| hci_update_class_sync(hdev); | |
| hci_update_name_sync(hdev, hdev->dev_name); | |
| hci_update_eir_sync(hdev); | |
| } | |
| /* If forcing static address is in use or there is no public | |
| * address use the static address as random address (but skip | |
| * the HCI command if the current random address is already the | |
| * static one. | |
| * | |
| * In case BR/EDR has been disabled on a dual-mode controller | |
| * and a static address has been configured, then use that | |
| * address instead of the public BR/EDR address. | |
| */ | |
| if (hci_dev_test_flag(hdev, HCI_FORCE_STATIC_ADDR) || | |
| (!bacmp(&hdev->bdaddr, BDADDR_ANY) && | |
| !hci_dev_test_flag(hdev, HCI_BREDR_ENABLED))) { | |
| if (bacmp(&hdev->static_addr, BDADDR_ANY)) | |
| return hci_set_random_addr_sync(hdev, | |
| &hdev->static_addr); | |
| } | |
| return 0; | |
| } | |
| /** | |
| * hci_dev_get_bd_addr_from_property - Get the Bluetooth Device Address | |
| * (BD_ADDR) for a HCI device from | |
| * a firmware node property. | |
| * @hdev: The HCI device | |
| * | |
| * Search the firmware node for 'local-bd-address'. | |
| * | |
| * All-zero BD addresses are rejected, because those could be properties | |
| * that exist in the firmware tables, but were not updated by the firmware. For | |
| * example, the DTS could define 'local-bd-address', with zero BD addresses. | |
| */ | |
| static void hci_dev_get_bd_addr_from_property(struct hci_dev *hdev) | |
| { | |
| struct fwnode_handle *fwnode = dev_fwnode(hdev->dev.parent); | |
| bdaddr_t ba; | |
| int ret; | |
| ret = fwnode_property_read_u8_array(fwnode, "local-bd-address", | |
| (u8 *)&ba, sizeof(ba)); | |
| if (ret < 0 || !bacmp(&ba, BDADDR_ANY)) | |
| return; | |
| if (test_bit(HCI_QUIRK_BDADDR_PROPERTY_BROKEN, &hdev->quirks)) | |
| baswap(&hdev->public_addr, &ba); | |
| else | |
| bacpy(&hdev->public_addr, &ba); | |
| } | |
| struct hci_init_stage { | |
| int (*func)(struct hci_dev *hdev); | |
| }; | |
| /* Run init stage NULL terminated function table */ | |
| static int hci_init_stage_sync(struct hci_dev *hdev, | |
| const struct hci_init_stage *stage) | |
| { | |
| size_t i; | |
| for (i = 0; stage[i].func; i++) { | |
| int err; | |
| err = stage[i].func(hdev); | |
| if (err) | |
| return err; | |
| } | |
| return 0; | |
| } | |
| /* Read Local Version */ | |
| static int hci_read_local_version_sync(struct hci_dev *hdev) | |
| { | |
| return __hci_cmd_sync_status(hdev, HCI_OP_READ_LOCAL_VERSION, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| } | |
| /* Read BD Address */ | |
| static int hci_read_bd_addr_sync(struct hci_dev *hdev) | |
| { | |
| return __hci_cmd_sync_status(hdev, HCI_OP_READ_BD_ADDR, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| } | |
| #define HCI_INIT(_func) \ | |
| { \ | |
| .func = _func, \ | |
| } | |
| static const struct hci_init_stage hci_init0[] = { | |
| /* HCI_OP_READ_LOCAL_VERSION */ | |
| HCI_INIT(hci_read_local_version_sync), | |
| /* HCI_OP_READ_BD_ADDR */ | |
| HCI_INIT(hci_read_bd_addr_sync), | |
| {} | |
| }; | |
| int hci_reset_sync(struct hci_dev *hdev) | |
| { | |
| int err; | |
| set_bit(HCI_RESET, &hdev->flags); | |
| err = __hci_cmd_sync_status(hdev, HCI_OP_RESET, 0, NULL, | |
| HCI_CMD_TIMEOUT); | |
| if (err) | |
| return err; | |
| return 0; | |
| } | |
| static int hci_init0_sync(struct hci_dev *hdev) | |
| { | |
| int err; | |
| bt_dev_dbg(hdev, ""); | |
| /* Reset */ | |
| if (!test_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks)) { | |
| err = hci_reset_sync(hdev); | |
| if (err) | |
| return err; | |
| } | |
| return hci_init_stage_sync(hdev, hci_init0); | |
| } | |
| static int hci_unconf_init_sync(struct hci_dev *hdev) | |
| { | |
| int err; | |
| if (test_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks)) | |
| return 0; | |
| err = hci_init0_sync(hdev); | |
| if (err < 0) | |
| return err; | |
| if (hci_dev_test_flag(hdev, HCI_SETUP)) | |
| hci_debugfs_create_basic(hdev); | |
| return 0; | |
| } | |
| /* Read Local Supported Features. */ | |
| static int hci_read_local_features_sync(struct hci_dev *hdev) | |
| { | |
| return __hci_cmd_sync_status(hdev, HCI_OP_READ_LOCAL_FEATURES, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| } | |
| /* BR Controller init stage 1 command sequence */ | |
| static const struct hci_init_stage br_init1[] = { | |
| /* HCI_OP_READ_LOCAL_FEATURES */ | |
| HCI_INIT(hci_read_local_features_sync), | |
| /* HCI_OP_READ_LOCAL_VERSION */ | |
| HCI_INIT(hci_read_local_version_sync), | |
| /* HCI_OP_READ_BD_ADDR */ | |
| HCI_INIT(hci_read_bd_addr_sync), | |
| {} | |
| }; | |
| /* Read Local Commands */ | |
| static int hci_read_local_cmds_sync(struct hci_dev *hdev) | |
| { | |
| /* All Bluetooth 1.2 and later controllers should support the | |
| * HCI command for reading the local supported commands. | |
| * | |
| * Unfortunately some controllers indicate Bluetooth 1.2 support, | |
| * but do not have support for this command. If that is the case, | |
| * the driver can quirk the behavior and skip reading the local | |
| * supported commands. | |
| */ | |
| if (hdev->hci_ver > BLUETOOTH_VER_1_1 && | |
| !test_bit(HCI_QUIRK_BROKEN_LOCAL_COMMANDS, &hdev->quirks)) | |
| return __hci_cmd_sync_status(hdev, HCI_OP_READ_LOCAL_COMMANDS, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| return 0; | |
| } | |
| static int hci_init1_sync(struct hci_dev *hdev) | |
| { | |
| int err; | |
| bt_dev_dbg(hdev, ""); | |
| /* Reset */ | |
| if (!test_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks)) { | |
| err = hci_reset_sync(hdev); | |
| if (err) | |
| return err; | |
| } | |
| return hci_init_stage_sync(hdev, br_init1); | |
| } | |
| /* Read Buffer Size (ACL mtu, max pkt, etc.) */ | |
| static int hci_read_buffer_size_sync(struct hci_dev *hdev) | |
| { | |
| return __hci_cmd_sync_status(hdev, HCI_OP_READ_BUFFER_SIZE, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| } | |
| /* Read Class of Device */ | |
| static int hci_read_dev_class_sync(struct hci_dev *hdev) | |
| { | |
| return __hci_cmd_sync_status(hdev, HCI_OP_READ_CLASS_OF_DEV, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| } | |
| /* Read Local Name */ | |
| static int hci_read_local_name_sync(struct hci_dev *hdev) | |
| { | |
| return __hci_cmd_sync_status(hdev, HCI_OP_READ_LOCAL_NAME, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| } | |
| /* Read Voice Setting */ | |
| static int hci_read_voice_setting_sync(struct hci_dev *hdev) | |
| { | |
| return __hci_cmd_sync_status(hdev, HCI_OP_READ_VOICE_SETTING, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| } | |
| /* Read Number of Supported IAC */ | |
| static int hci_read_num_supported_iac_sync(struct hci_dev *hdev) | |
| { | |
| return __hci_cmd_sync_status(hdev, HCI_OP_READ_NUM_SUPPORTED_IAC, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| } | |
| /* Read Current IAC LAP */ | |
| static int hci_read_current_iac_lap_sync(struct hci_dev *hdev) | |
| { | |
| return __hci_cmd_sync_status(hdev, HCI_OP_READ_CURRENT_IAC_LAP, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_set_event_filter_sync(struct hci_dev *hdev, u8 flt_type, | |
| u8 cond_type, bdaddr_t *bdaddr, | |
| u8 auto_accept) | |
| { | |
| struct hci_cp_set_event_filter cp; | |
| if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) | |
| return 0; | |
| if (test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks)) | |
| return 0; | |
| memset(&cp, 0, sizeof(cp)); | |
| cp.flt_type = flt_type; | |
| if (flt_type != HCI_FLT_CLEAR_ALL) { | |
| cp.cond_type = cond_type; | |
| bacpy(&cp.addr_conn_flt.bdaddr, bdaddr); | |
| cp.addr_conn_flt.auto_accept = auto_accept; | |
| } | |
| return __hci_cmd_sync_status(hdev, HCI_OP_SET_EVENT_FLT, | |
| flt_type == HCI_FLT_CLEAR_ALL ? | |
| sizeof(cp.flt_type) : sizeof(cp), &cp, | |
| HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_clear_event_filter_sync(struct hci_dev *hdev) | |
| { | |
| if (!hci_dev_test_flag(hdev, HCI_EVENT_FILTER_CONFIGURED)) | |
| return 0; | |
| /* In theory the state machine should not reach here unless | |
| * a hci_set_event_filter_sync() call succeeds, but we do | |
| * the check both for parity and as a future reminder. | |
| */ | |
| if (test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks)) | |
| return 0; | |
| return hci_set_event_filter_sync(hdev, HCI_FLT_CLEAR_ALL, 0x00, | |
| BDADDR_ANY, 0x00); | |
| } | |
| /* Connection accept timeout ~20 secs */ | |
| static int hci_write_ca_timeout_sync(struct hci_dev *hdev) | |
| { | |
| __le16 param = cpu_to_le16(0x7d00); | |
| return __hci_cmd_sync_status(hdev, HCI_OP_WRITE_CA_TIMEOUT, | |
| sizeof(param), ¶m, HCI_CMD_TIMEOUT); | |
| } | |
| /* BR Controller init stage 2 command sequence */ | |
| static const struct hci_init_stage br_init2[] = { | |
| /* HCI_OP_READ_BUFFER_SIZE */ | |
| HCI_INIT(hci_read_buffer_size_sync), | |
| /* HCI_OP_READ_CLASS_OF_DEV */ | |
| HCI_INIT(hci_read_dev_class_sync), | |
| /* HCI_OP_READ_LOCAL_NAME */ | |
| HCI_INIT(hci_read_local_name_sync), | |
| /* HCI_OP_READ_VOICE_SETTING */ | |
| HCI_INIT(hci_read_voice_setting_sync), | |
| /* HCI_OP_READ_NUM_SUPPORTED_IAC */ | |
| HCI_INIT(hci_read_num_supported_iac_sync), | |
| /* HCI_OP_READ_CURRENT_IAC_LAP */ | |
| HCI_INIT(hci_read_current_iac_lap_sync), | |
| /* HCI_OP_SET_EVENT_FLT */ | |
| HCI_INIT(hci_clear_event_filter_sync), | |
| /* HCI_OP_WRITE_CA_TIMEOUT */ | |
| HCI_INIT(hci_write_ca_timeout_sync), | |
| {} | |
| }; | |
| static int hci_write_ssp_mode_1_sync(struct hci_dev *hdev) | |
| { | |
| u8 mode = 0x01; | |
| if (!lmp_ssp_capable(hdev) || !hci_dev_test_flag(hdev, HCI_SSP_ENABLED)) | |
| return 0; | |
| /* When SSP is available, then the host features page | |
| * should also be available as well. However some | |
| * controllers list the max_page as 0 as long as SSP | |
| * has not been enabled. To achieve proper debugging | |
| * output, force the minimum max_page to 1 at least. | |
| */ | |
| hdev->max_page = 0x01; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_WRITE_SSP_MODE, | |
| sizeof(mode), &mode, HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_write_eir_sync(struct hci_dev *hdev) | |
| { | |
| struct hci_cp_write_eir cp; | |
| if (!lmp_ssp_capable(hdev) || hci_dev_test_flag(hdev, HCI_SSP_ENABLED)) | |
| return 0; | |
| memset(hdev->eir, 0, sizeof(hdev->eir)); | |
| memset(&cp, 0, sizeof(cp)); | |
| return __hci_cmd_sync_status(hdev, HCI_OP_WRITE_EIR, sizeof(cp), &cp, | |
| HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_write_inquiry_mode_sync(struct hci_dev *hdev) | |
| { | |
| u8 mode; | |
| if (!lmp_inq_rssi_capable(hdev) && | |
| !test_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks)) | |
| return 0; | |
| /* If Extended Inquiry Result events are supported, then | |
| * they are clearly preferred over Inquiry Result with RSSI | |
| * events. | |
| */ | |
| mode = lmp_ext_inq_capable(hdev) ? 0x02 : 0x01; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_WRITE_INQUIRY_MODE, | |
| sizeof(mode), &mode, HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_read_inq_rsp_tx_power_sync(struct hci_dev *hdev) | |
| { | |
| if (!lmp_inq_tx_pwr_capable(hdev)) | |
| return 0; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_READ_INQ_RSP_TX_POWER, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_read_local_ext_features_sync(struct hci_dev *hdev, u8 page) | |
| { | |
| struct hci_cp_read_local_ext_features cp; | |
| if (!lmp_ext_feat_capable(hdev)) | |
| return 0; | |
| memset(&cp, 0, sizeof(cp)); | |
| cp.page = page; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_READ_LOCAL_EXT_FEATURES, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_read_local_ext_features_1_sync(struct hci_dev *hdev) | |
| { | |
| return hci_read_local_ext_features_sync(hdev, 0x01); | |
| } | |
| /* HCI Controller init stage 2 command sequence */ | |
| static const struct hci_init_stage hci_init2[] = { | |
| /* HCI_OP_READ_LOCAL_COMMANDS */ | |
| HCI_INIT(hci_read_local_cmds_sync), | |
| /* HCI_OP_WRITE_SSP_MODE */ | |
| HCI_INIT(hci_write_ssp_mode_1_sync), | |
| /* HCI_OP_WRITE_EIR */ | |
| HCI_INIT(hci_write_eir_sync), | |
| /* HCI_OP_WRITE_INQUIRY_MODE */ | |
| HCI_INIT(hci_write_inquiry_mode_sync), | |
| /* HCI_OP_READ_INQ_RSP_TX_POWER */ | |
| HCI_INIT(hci_read_inq_rsp_tx_power_sync), | |
| /* HCI_OP_READ_LOCAL_EXT_FEATURES */ | |
| HCI_INIT(hci_read_local_ext_features_1_sync), | |
| /* HCI_OP_WRITE_AUTH_ENABLE */ | |
| HCI_INIT(hci_write_auth_enable_sync), | |
| {} | |
| }; | |
| /* Read LE Buffer Size */ | |
| static int hci_le_read_buffer_size_sync(struct hci_dev *hdev) | |
| { | |
| /* Use Read LE Buffer Size V2 if supported */ | |
| if (iso_capable(hdev) && hdev->commands[41] & 0x20) | |
| return __hci_cmd_sync_status(hdev, | |
| HCI_OP_LE_READ_BUFFER_SIZE_V2, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_READ_BUFFER_SIZE, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| } | |
| /* Read LE Local Supported Features */ | |
| static int hci_le_read_local_features_sync(struct hci_dev *hdev) | |
| { | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_READ_LOCAL_FEATURES, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| } | |
| /* Read LE Supported States */ | |
| static int hci_le_read_supported_states_sync(struct hci_dev *hdev) | |
| { | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_READ_SUPPORTED_STATES, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| } | |
| /* LE Controller init stage 2 command sequence */ | |
| static const struct hci_init_stage le_init2[] = { | |
| /* HCI_OP_LE_READ_LOCAL_FEATURES */ | |
| HCI_INIT(hci_le_read_local_features_sync), | |
| /* HCI_OP_LE_READ_BUFFER_SIZE */ | |
| HCI_INIT(hci_le_read_buffer_size_sync), | |
| /* HCI_OP_LE_READ_SUPPORTED_STATES */ | |
| HCI_INIT(hci_le_read_supported_states_sync), | |
| {} | |
| }; | |
| static int hci_init2_sync(struct hci_dev *hdev) | |
| { | |
| int err; | |
| bt_dev_dbg(hdev, ""); | |
| err = hci_init_stage_sync(hdev, hci_init2); | |
| if (err) | |
| return err; | |
| if (lmp_bredr_capable(hdev)) { | |
| err = hci_init_stage_sync(hdev, br_init2); | |
| if (err) | |
| return err; | |
| } else { | |
| hci_dev_clear_flag(hdev, HCI_BREDR_ENABLED); | |
| } | |
| if (lmp_le_capable(hdev)) { | |
| err = hci_init_stage_sync(hdev, le_init2); | |
| if (err) | |
| return err; | |
| /* LE-only controllers have LE implicitly enabled */ | |
| if (!lmp_bredr_capable(hdev)) | |
| hci_dev_set_flag(hdev, HCI_LE_ENABLED); | |
| } | |
| return 0; | |
| } | |
| static int hci_set_event_mask_sync(struct hci_dev *hdev) | |
| { | |
| /* The second byte is 0xff instead of 0x9f (two reserved bits | |
| * disabled) since a Broadcom 1.2 dongle doesn't respond to the | |
| * command otherwise. | |
| */ | |
| u8 events[8] = { 0xff, 0xff, 0xfb, 0xff, 0x00, 0x00, 0x00, 0x00 }; | |
| /* CSR 1.1 dongles does not accept any bitfield so don't try to set | |
| * any event mask for pre 1.2 devices. | |
| */ | |
| if (hdev->hci_ver < BLUETOOTH_VER_1_2) | |
| return 0; | |
| if (lmp_bredr_capable(hdev)) { | |
| events[4] |= 0x01; /* Flow Specification Complete */ | |
| /* Don't set Disconnect Complete and mode change when | |
| * suspended as that would wakeup the host when disconnecting | |
| * due to suspend. | |
| */ | |
| if (hdev->suspended) { | |
| events[0] &= 0xef; | |
| events[2] &= 0xf7; | |
| } | |
| } else { | |
| /* Use a different default for LE-only devices */ | |
| memset(events, 0, sizeof(events)); | |
| events[1] |= 0x20; /* Command Complete */ | |
| events[1] |= 0x40; /* Command Status */ | |
| events[1] |= 0x80; /* Hardware Error */ | |
| /* If the controller supports the Disconnect command, enable | |
| * the corresponding event. In addition enable packet flow | |
| * control related events. | |
| */ | |
| if (hdev->commands[0] & 0x20) { | |
| /* Don't set Disconnect Complete when suspended as that | |
| * would wakeup the host when disconnecting due to | |
| * suspend. | |
| */ | |
| if (!hdev->suspended) | |
| events[0] |= 0x10; /* Disconnection Complete */ | |
| events[2] |= 0x04; /* Number of Completed Packets */ | |
| events[3] |= 0x02; /* Data Buffer Overflow */ | |
| } | |
| /* If the controller supports the Read Remote Version | |
| * Information command, enable the corresponding event. | |
| */ | |
| if (hdev->commands[2] & 0x80) | |
| events[1] |= 0x08; /* Read Remote Version Information | |
| * Complete | |
| */ | |
| if (hdev->le_features[0] & HCI_LE_ENCRYPTION) { | |
| events[0] |= 0x80; /* Encryption Change */ | |
| events[5] |= 0x80; /* Encryption Key Refresh Complete */ | |
| } | |
| } | |
| if (lmp_inq_rssi_capable(hdev) || | |
| test_bit(HCI_QUIRK_FIXUP_INQUIRY_MODE, &hdev->quirks)) | |
| events[4] |= 0x02; /* Inquiry Result with RSSI */ | |
| if (lmp_ext_feat_capable(hdev)) | |
| events[4] |= 0x04; /* Read Remote Extended Features Complete */ | |
| if (lmp_esco_capable(hdev)) { | |
| events[5] |= 0x08; /* Synchronous Connection Complete */ | |
| events[5] |= 0x10; /* Synchronous Connection Changed */ | |
| } | |
| if (lmp_sniffsubr_capable(hdev)) | |
| events[5] |= 0x20; /* Sniff Subrating */ | |
| if (lmp_pause_enc_capable(hdev)) | |
| events[5] |= 0x80; /* Encryption Key Refresh Complete */ | |
| if (lmp_ext_inq_capable(hdev)) | |
| events[5] |= 0x40; /* Extended Inquiry Result */ | |
| if (lmp_no_flush_capable(hdev)) | |
| events[7] |= 0x01; /* Enhanced Flush Complete */ | |
| if (lmp_lsto_capable(hdev)) | |
| events[6] |= 0x80; /* Link Supervision Timeout Changed */ | |
| if (lmp_ssp_capable(hdev)) { | |
| events[6] |= 0x01; /* IO Capability Request */ | |
| events[6] |= 0x02; /* IO Capability Response */ | |
| events[6] |= 0x04; /* User Confirmation Request */ | |
| events[6] |= 0x08; /* User Passkey Request */ | |
| events[6] |= 0x10; /* Remote OOB Data Request */ | |
| events[6] |= 0x20; /* Simple Pairing Complete */ | |
| events[7] |= 0x04; /* User Passkey Notification */ | |
| events[7] |= 0x08; /* Keypress Notification */ | |
| events[7] |= 0x10; /* Remote Host Supported | |
| * Features Notification | |
| */ | |
| } | |
| if (lmp_le_capable(hdev)) | |
| events[7] |= 0x20; /* LE Meta-Event */ | |
| return __hci_cmd_sync_status(hdev, HCI_OP_SET_EVENT_MASK, | |
| sizeof(events), events, HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_read_stored_link_key_sync(struct hci_dev *hdev) | |
| { | |
| struct hci_cp_read_stored_link_key cp; | |
| if (!(hdev->commands[6] & 0x20) || | |
| test_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks)) | |
| return 0; | |
| memset(&cp, 0, sizeof(cp)); | |
| bacpy(&cp.bdaddr, BDADDR_ANY); | |
| cp.read_all = 0x01; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_READ_STORED_LINK_KEY, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_setup_link_policy_sync(struct hci_dev *hdev) | |
| { | |
| struct hci_cp_write_def_link_policy cp; | |
| u16 link_policy = 0; | |
| if (!(hdev->commands[5] & 0x10)) | |
| return 0; | |
| memset(&cp, 0, sizeof(cp)); | |
| if (lmp_rswitch_capable(hdev)) | |
| link_policy |= HCI_LP_RSWITCH; | |
| if (lmp_hold_capable(hdev)) | |
| link_policy |= HCI_LP_HOLD; | |
| if (lmp_sniff_capable(hdev)) | |
| link_policy |= HCI_LP_SNIFF; | |
| if (lmp_park_capable(hdev)) | |
| link_policy |= HCI_LP_PARK; | |
| cp.policy = cpu_to_le16(link_policy); | |
| return __hci_cmd_sync_status(hdev, HCI_OP_WRITE_DEF_LINK_POLICY, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_read_page_scan_activity_sync(struct hci_dev *hdev) | |
| { | |
| if (!(hdev->commands[8] & 0x01)) | |
| return 0; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_READ_PAGE_SCAN_ACTIVITY, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_read_def_err_data_reporting_sync(struct hci_dev *hdev) | |
| { | |
| if (!(hdev->commands[18] & 0x04) || | |
| !(hdev->features[0][6] & LMP_ERR_DATA_REPORTING) || | |
| test_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks)) | |
| return 0; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_READ_DEF_ERR_DATA_REPORTING, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_read_page_scan_type_sync(struct hci_dev *hdev) | |
| { | |
| /* Some older Broadcom based Bluetooth 1.2 controllers do not | |
| * support the Read Page Scan Type command. Check support for | |
| * this command in the bit mask of supported commands. | |
| */ | |
| if (!(hdev->commands[13] & 0x01)) | |
| return 0; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_READ_PAGE_SCAN_TYPE, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| } | |
| /* Read features beyond page 1 if available */ | |
| static int hci_read_local_ext_features_all_sync(struct hci_dev *hdev) | |
| { | |
| u8 page; | |
| int err; | |
| if (!lmp_ext_feat_capable(hdev)) | |
| return 0; | |
| for (page = 2; page < HCI_MAX_PAGES && page <= hdev->max_page; | |
| page++) { | |
| err = hci_read_local_ext_features_sync(hdev, page); | |
| if (err) | |
| return err; | |
| } | |
| return 0; | |
| } | |
| /* HCI Controller init stage 3 command sequence */ | |
| static const struct hci_init_stage hci_init3[] = { | |
| /* HCI_OP_SET_EVENT_MASK */ | |
| HCI_INIT(hci_set_event_mask_sync), | |
| /* HCI_OP_READ_STORED_LINK_KEY */ | |
| HCI_INIT(hci_read_stored_link_key_sync), | |
| /* HCI_OP_WRITE_DEF_LINK_POLICY */ | |
| HCI_INIT(hci_setup_link_policy_sync), | |
| /* HCI_OP_READ_PAGE_SCAN_ACTIVITY */ | |
| HCI_INIT(hci_read_page_scan_activity_sync), | |
| /* HCI_OP_READ_DEF_ERR_DATA_REPORTING */ | |
| HCI_INIT(hci_read_def_err_data_reporting_sync), | |
| /* HCI_OP_READ_PAGE_SCAN_TYPE */ | |
| HCI_INIT(hci_read_page_scan_type_sync), | |
| /* HCI_OP_READ_LOCAL_EXT_FEATURES */ | |
| HCI_INIT(hci_read_local_ext_features_all_sync), | |
| {} | |
| }; | |
| static int hci_le_set_event_mask_sync(struct hci_dev *hdev) | |
| { | |
| u8 events[8]; | |
| if (!lmp_le_capable(hdev)) | |
| return 0; | |
| memset(events, 0, sizeof(events)); | |
| if (hdev->le_features[0] & HCI_LE_ENCRYPTION) | |
| events[0] |= 0x10; /* LE Long Term Key Request */ | |
| /* If controller supports the Connection Parameters Request | |
| * Link Layer Procedure, enable the corresponding event. | |
| */ | |
| if (hdev->le_features[0] & HCI_LE_CONN_PARAM_REQ_PROC) | |
| /* LE Remote Connection Parameter Request */ | |
| events[0] |= 0x20; | |
| /* If the controller supports the Data Length Extension | |
| * feature, enable the corresponding event. | |
| */ | |
| if (hdev->le_features[0] & HCI_LE_DATA_LEN_EXT) | |
| events[0] |= 0x40; /* LE Data Length Change */ | |
| /* If the controller supports LL Privacy feature or LE Extended Adv, | |
| * enable the corresponding event. | |
| */ | |
| if (use_enhanced_conn_complete(hdev)) | |
| events[1] |= 0x02; /* LE Enhanced Connection Complete */ | |
| /* If the controller supports Extended Scanner Filter | |
| * Policies, enable the corresponding event. | |
| */ | |
| if (hdev->le_features[0] & HCI_LE_EXT_SCAN_POLICY) | |
| events[1] |= 0x04; /* LE Direct Advertising Report */ | |
| /* If the controller supports Channel Selection Algorithm #2 | |
| * feature, enable the corresponding event. | |
| */ | |
| if (hdev->le_features[1] & HCI_LE_CHAN_SEL_ALG2) | |
| events[2] |= 0x08; /* LE Channel Selection Algorithm */ | |
| /* If the controller supports the LE Set Scan Enable command, | |
| * enable the corresponding advertising report event. | |
| */ | |
| if (hdev->commands[26] & 0x08) | |
| events[0] |= 0x02; /* LE Advertising Report */ | |
| /* If the controller supports the LE Create Connection | |
| * command, enable the corresponding event. | |
| */ | |
| if (hdev->commands[26] & 0x10) | |
| events[0] |= 0x01; /* LE Connection Complete */ | |
| /* If the controller supports the LE Connection Update | |
| * command, enable the corresponding event. | |
| */ | |
| if (hdev->commands[27] & 0x04) | |
| events[0] |= 0x04; /* LE Connection Update Complete */ | |
| /* If the controller supports the LE Read Remote Used Features | |
| * command, enable the corresponding event. | |
| */ | |
| if (hdev->commands[27] & 0x20) | |
| /* LE Read Remote Used Features Complete */ | |
| events[0] |= 0x08; | |
| /* If the controller supports the LE Read Local P-256 | |
| * Public Key command, enable the corresponding event. | |
| */ | |
| if (hdev->commands[34] & 0x02) | |
| /* LE Read Local P-256 Public Key Complete */ | |
| events[0] |= 0x80; | |
| /* If the controller supports the LE Generate DHKey | |
| * command, enable the corresponding event. | |
| */ | |
| if (hdev->commands[34] & 0x04) | |
| events[1] |= 0x01; /* LE Generate DHKey Complete */ | |
| /* If the controller supports the LE Set Default PHY or | |
| * LE Set PHY commands, enable the corresponding event. | |
| */ | |
| if (hdev->commands[35] & (0x20 | 0x40)) | |
| events[1] |= 0x08; /* LE PHY Update Complete */ | |
| /* If the controller supports LE Set Extended Scan Parameters | |
| * and LE Set Extended Scan Enable commands, enable the | |
| * corresponding event. | |
| */ | |
| if (use_ext_scan(hdev)) | |
| events[1] |= 0x10; /* LE Extended Advertising Report */ | |
| /* If the controller supports the LE Extended Advertising | |
| * command, enable the corresponding event. | |
| */ | |
| if (ext_adv_capable(hdev)) | |
| events[2] |= 0x02; /* LE Advertising Set Terminated */ | |
| if (cis_capable(hdev)) { | |
| events[3] |= 0x01; /* LE CIS Established */ | |
| if (cis_peripheral_capable(hdev)) | |
| events[3] |= 0x02; /* LE CIS Request */ | |
| } | |
| if (bis_capable(hdev)) { | |
| events[1] |= 0x20; /* LE PA Report */ | |
| events[1] |= 0x40; /* LE PA Sync Established */ | |
| events[3] |= 0x04; /* LE Create BIG Complete */ | |
| events[3] |= 0x08; /* LE Terminate BIG Complete */ | |
| events[3] |= 0x10; /* LE BIG Sync Established */ | |
| events[3] |= 0x20; /* LE BIG Sync Loss */ | |
| events[4] |= 0x02; /* LE BIG Info Advertising Report */ | |
| } | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_EVENT_MASK, | |
| sizeof(events), events, HCI_CMD_TIMEOUT); | |
| } | |
| /* Read LE Advertising Channel TX Power */ | |
| static int hci_le_read_adv_tx_power_sync(struct hci_dev *hdev) | |
| { | |
| if ((hdev->commands[25] & 0x40) && !ext_adv_capable(hdev)) { | |
| /* HCI TS spec forbids mixing of legacy and extended | |
| * advertising commands wherein READ_ADV_TX_POWER is | |
| * also included. So do not call it if extended adv | |
| * is supported otherwise controller will return | |
| * COMMAND_DISALLOWED for extended commands. | |
| */ | |
| return __hci_cmd_sync_status(hdev, | |
| HCI_OP_LE_READ_ADV_TX_POWER, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| } | |
| return 0; | |
| } | |
| /* Read LE Min/Max Tx Power*/ | |
| static int hci_le_read_tx_power_sync(struct hci_dev *hdev) | |
| { | |
| if (!(hdev->commands[38] & 0x80) || | |
| test_bit(HCI_QUIRK_BROKEN_READ_TRANSMIT_POWER, &hdev->quirks)) | |
| return 0; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_READ_TRANSMIT_POWER, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| } | |
| /* Read LE Accept List Size */ | |
| static int hci_le_read_accept_list_size_sync(struct hci_dev *hdev) | |
| { | |
| if (!(hdev->commands[26] & 0x40)) | |
| return 0; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_READ_ACCEPT_LIST_SIZE, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| } | |
| /* Clear LE Accept List */ | |
| static int hci_le_clear_accept_list_sync(struct hci_dev *hdev) | |
| { | |
| if (!(hdev->commands[26] & 0x80)) | |
| return 0; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_CLEAR_ACCEPT_LIST, 0, NULL, | |
| HCI_CMD_TIMEOUT); | |
| } | |
| /* Read LE Resolving List Size */ | |
| static int hci_le_read_resolv_list_size_sync(struct hci_dev *hdev) | |
| { | |
| if (!(hdev->commands[34] & 0x40)) | |
| return 0; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_READ_RESOLV_LIST_SIZE, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| } | |
| /* Clear LE Resolving List */ | |
| static int hci_le_clear_resolv_list_sync(struct hci_dev *hdev) | |
| { | |
| if (!(hdev->commands[34] & 0x20)) | |
| return 0; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_CLEAR_RESOLV_LIST, 0, NULL, | |
| HCI_CMD_TIMEOUT); | |
| } | |
| /* Set RPA timeout */ | |
| static int hci_le_set_rpa_timeout_sync(struct hci_dev *hdev) | |
| { | |
| __le16 timeout = cpu_to_le16(hdev->rpa_timeout); | |
| if (!(hdev->commands[35] & 0x04) || | |
| test_bit(HCI_QUIRK_BROKEN_SET_RPA_TIMEOUT, &hdev->quirks)) | |
| return 0; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_RPA_TIMEOUT, | |
| sizeof(timeout), &timeout, | |
| HCI_CMD_TIMEOUT); | |
| } | |
| /* Read LE Maximum Data Length */ | |
| static int hci_le_read_max_data_len_sync(struct hci_dev *hdev) | |
| { | |
| if (!(hdev->le_features[0] & HCI_LE_DATA_LEN_EXT)) | |
| return 0; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_READ_MAX_DATA_LEN, 0, NULL, | |
| HCI_CMD_TIMEOUT); | |
| } | |
| /* Read LE Suggested Default Data Length */ | |
| static int hci_le_read_def_data_len_sync(struct hci_dev *hdev) | |
| { | |
| if (!(hdev->le_features[0] & HCI_LE_DATA_LEN_EXT)) | |
| return 0; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_READ_DEF_DATA_LEN, 0, NULL, | |
| HCI_CMD_TIMEOUT); | |
| } | |
| /* Read LE Number of Supported Advertising Sets */ | |
| static int hci_le_read_num_support_adv_sets_sync(struct hci_dev *hdev) | |
| { | |
| if (!ext_adv_capable(hdev)) | |
| return 0; | |
| return __hci_cmd_sync_status(hdev, | |
| HCI_OP_LE_READ_NUM_SUPPORTED_ADV_SETS, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| } | |
| /* Write LE Host Supported */ | |
| static int hci_set_le_support_sync(struct hci_dev *hdev) | |
| { | |
| struct hci_cp_write_le_host_supported cp; | |
| /* LE-only devices do not support explicit enablement */ | |
| if (!lmp_bredr_capable(hdev)) | |
| return 0; | |
| memset(&cp, 0, sizeof(cp)); | |
| if (hci_dev_test_flag(hdev, HCI_LE_ENABLED)) { | |
| cp.le = 0x01; | |
| cp.simul = 0x00; | |
| } | |
| if (cp.le == lmp_host_le_capable(hdev)) | |
| return 0; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_WRITE_LE_HOST_SUPPORTED, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| /* LE Set Host Feature */ | |
| static int hci_le_set_host_feature_sync(struct hci_dev *hdev) | |
| { | |
| struct hci_cp_le_set_host_feature cp; | |
| if (!iso_capable(hdev)) | |
| return 0; | |
| memset(&cp, 0, sizeof(cp)); | |
| /* Isochronous Channels (Host Support) */ | |
| cp.bit_number = 32; | |
| cp.bit_value = 1; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_HOST_FEATURE, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| /* LE Controller init stage 3 command sequence */ | |
| static const struct hci_init_stage le_init3[] = { | |
| /* HCI_OP_LE_SET_EVENT_MASK */ | |
| HCI_INIT(hci_le_set_event_mask_sync), | |
| /* HCI_OP_LE_READ_ADV_TX_POWER */ | |
| HCI_INIT(hci_le_read_adv_tx_power_sync), | |
| /* HCI_OP_LE_READ_TRANSMIT_POWER */ | |
| HCI_INIT(hci_le_read_tx_power_sync), | |
| /* HCI_OP_LE_READ_ACCEPT_LIST_SIZE */ | |
| HCI_INIT(hci_le_read_accept_list_size_sync), | |
| /* HCI_OP_LE_CLEAR_ACCEPT_LIST */ | |
| HCI_INIT(hci_le_clear_accept_list_sync), | |
| /* HCI_OP_LE_READ_RESOLV_LIST_SIZE */ | |
| HCI_INIT(hci_le_read_resolv_list_size_sync), | |
| /* HCI_OP_LE_CLEAR_RESOLV_LIST */ | |
| HCI_INIT(hci_le_clear_resolv_list_sync), | |
| /* HCI_OP_LE_SET_RPA_TIMEOUT */ | |
| HCI_INIT(hci_le_set_rpa_timeout_sync), | |
| /* HCI_OP_LE_READ_MAX_DATA_LEN */ | |
| HCI_INIT(hci_le_read_max_data_len_sync), | |
| /* HCI_OP_LE_READ_DEF_DATA_LEN */ | |
| HCI_INIT(hci_le_read_def_data_len_sync), | |
| /* HCI_OP_LE_READ_NUM_SUPPORTED_ADV_SETS */ | |
| HCI_INIT(hci_le_read_num_support_adv_sets_sync), | |
| /* HCI_OP_WRITE_LE_HOST_SUPPORTED */ | |
| HCI_INIT(hci_set_le_support_sync), | |
| /* HCI_OP_LE_SET_HOST_FEATURE */ | |
| HCI_INIT(hci_le_set_host_feature_sync), | |
| {} | |
| }; | |
| static int hci_init3_sync(struct hci_dev *hdev) | |
| { | |
| int err; | |
| bt_dev_dbg(hdev, ""); | |
| err = hci_init_stage_sync(hdev, hci_init3); | |
| if (err) | |
| return err; | |
| if (lmp_le_capable(hdev)) | |
| return hci_init_stage_sync(hdev, le_init3); | |
| return 0; | |
| } | |
| static int hci_delete_stored_link_key_sync(struct hci_dev *hdev) | |
| { | |
| struct hci_cp_delete_stored_link_key cp; | |
| /* Some Broadcom based Bluetooth controllers do not support the | |
| * Delete Stored Link Key command. They are clearly indicating its | |
| * absence in the bit mask of supported commands. | |
| * | |
| * Check the supported commands and only if the command is marked | |
| * as supported send it. If not supported assume that the controller | |
| * does not have actual support for stored link keys which makes this | |
| * command redundant anyway. | |
| * | |
| * Some controllers indicate that they support handling deleting | |
| * stored link keys, but they don't. The quirk lets a driver | |
| * just disable this command. | |
| */ | |
| if (!(hdev->commands[6] & 0x80) || | |
| test_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks)) | |
| return 0; | |
| memset(&cp, 0, sizeof(cp)); | |
| bacpy(&cp.bdaddr, BDADDR_ANY); | |
| cp.delete_all = 0x01; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_DELETE_STORED_LINK_KEY, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_set_event_mask_page_2_sync(struct hci_dev *hdev) | |
| { | |
| u8 events[8] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; | |
| bool changed = false; | |
| /* Set event mask page 2 if the HCI command for it is supported */ | |
| if (!(hdev->commands[22] & 0x04)) | |
| return 0; | |
| /* If Connectionless Peripheral Broadcast central role is supported | |
| * enable all necessary events for it. | |
| */ | |
| if (lmp_cpb_central_capable(hdev)) { | |
| events[1] |= 0x40; /* Triggered Clock Capture */ | |
| events[1] |= 0x80; /* Synchronization Train Complete */ | |
| events[2] |= 0x08; /* Truncated Page Complete */ | |
| events[2] |= 0x20; /* CPB Channel Map Change */ | |
| changed = true; | |
| } | |
| /* If Connectionless Peripheral Broadcast peripheral role is supported | |
| * enable all necessary events for it. | |
| */ | |
| if (lmp_cpb_peripheral_capable(hdev)) { | |
| events[2] |= 0x01; /* Synchronization Train Received */ | |
| events[2] |= 0x02; /* CPB Receive */ | |
| events[2] |= 0x04; /* CPB Timeout */ | |
| events[2] |= 0x10; /* Peripheral Page Response Timeout */ | |
| changed = true; | |
| } | |
| /* Enable Authenticated Payload Timeout Expired event if supported */ | |
| if (lmp_ping_capable(hdev) || hdev->le_features[0] & HCI_LE_PING) { | |
| events[2] |= 0x80; | |
| changed = true; | |
| } | |
| /* Some Broadcom based controllers indicate support for Set Event | |
| * Mask Page 2 command, but then actually do not support it. Since | |
| * the default value is all bits set to zero, the command is only | |
| * required if the event mask has to be changed. In case no change | |
| * to the event mask is needed, skip this command. | |
| */ | |
| if (!changed) | |
| return 0; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_SET_EVENT_MASK_PAGE_2, | |
| sizeof(events), events, HCI_CMD_TIMEOUT); | |
| } | |
| /* Read local codec list if the HCI command is supported */ | |
| static int hci_read_local_codecs_sync(struct hci_dev *hdev) | |
| { | |
| if (hdev->commands[45] & 0x04) | |
| hci_read_supported_codecs_v2(hdev); | |
| else if (hdev->commands[29] & 0x20) | |
| hci_read_supported_codecs(hdev); | |
| return 0; | |
| } | |
| /* Read local pairing options if the HCI command is supported */ | |
| static int hci_read_local_pairing_opts_sync(struct hci_dev *hdev) | |
| { | |
| if (!(hdev->commands[41] & 0x08)) | |
| return 0; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_READ_LOCAL_PAIRING_OPTS, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| } | |
| /* Get MWS transport configuration if the HCI command is supported */ | |
| static int hci_get_mws_transport_config_sync(struct hci_dev *hdev) | |
| { | |
| if (!mws_transport_config_capable(hdev)) | |
| return 0; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_GET_MWS_TRANSPORT_CONFIG, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| } | |
| /* Check for Synchronization Train support */ | |
| static int hci_read_sync_train_params_sync(struct hci_dev *hdev) | |
| { | |
| if (!lmp_sync_train_capable(hdev)) | |
| return 0; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_READ_SYNC_TRAIN_PARAMS, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| } | |
| /* Enable Secure Connections if supported and configured */ | |
| static int hci_write_sc_support_1_sync(struct hci_dev *hdev) | |
| { | |
| u8 support = 0x01; | |
| if (!hci_dev_test_flag(hdev, HCI_SSP_ENABLED) || | |
| !bredr_sc_enabled(hdev)) | |
| return 0; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_WRITE_SC_SUPPORT, | |
| sizeof(support), &support, | |
| HCI_CMD_TIMEOUT); | |
| } | |
| /* Set erroneous data reporting if supported to the wideband speech | |
| * setting value | |
| */ | |
| static int hci_set_err_data_report_sync(struct hci_dev *hdev) | |
| { | |
| struct hci_cp_write_def_err_data_reporting cp; | |
| bool enabled = hci_dev_test_flag(hdev, HCI_WIDEBAND_SPEECH_ENABLED); | |
| if (!(hdev->commands[18] & 0x08) || | |
| !(hdev->features[0][6] & LMP_ERR_DATA_REPORTING) || | |
| test_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks)) | |
| return 0; | |
| if (enabled == hdev->err_data_reporting) | |
| return 0; | |
| memset(&cp, 0, sizeof(cp)); | |
| cp.err_data_reporting = enabled ? ERR_DATA_REPORTING_ENABLED : | |
| ERR_DATA_REPORTING_DISABLED; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_WRITE_DEF_ERR_DATA_REPORTING, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| static const struct hci_init_stage hci_init4[] = { | |
| /* HCI_OP_DELETE_STORED_LINK_KEY */ | |
| HCI_INIT(hci_delete_stored_link_key_sync), | |
| /* HCI_OP_SET_EVENT_MASK_PAGE_2 */ | |
| HCI_INIT(hci_set_event_mask_page_2_sync), | |
| /* HCI_OP_READ_LOCAL_CODECS */ | |
| HCI_INIT(hci_read_local_codecs_sync), | |
| /* HCI_OP_READ_LOCAL_PAIRING_OPTS */ | |
| HCI_INIT(hci_read_local_pairing_opts_sync), | |
| /* HCI_OP_GET_MWS_TRANSPORT_CONFIG */ | |
| HCI_INIT(hci_get_mws_transport_config_sync), | |
| /* HCI_OP_READ_SYNC_TRAIN_PARAMS */ | |
| HCI_INIT(hci_read_sync_train_params_sync), | |
| /* HCI_OP_WRITE_SC_SUPPORT */ | |
| HCI_INIT(hci_write_sc_support_1_sync), | |
| /* HCI_OP_WRITE_DEF_ERR_DATA_REPORTING */ | |
| HCI_INIT(hci_set_err_data_report_sync), | |
| {} | |
| }; | |
| /* Set Suggested Default Data Length to maximum if supported */ | |
| static int hci_le_set_write_def_data_len_sync(struct hci_dev *hdev) | |
| { | |
| struct hci_cp_le_write_def_data_len cp; | |
| if (!(hdev->le_features[0] & HCI_LE_DATA_LEN_EXT)) | |
| return 0; | |
| memset(&cp, 0, sizeof(cp)); | |
| cp.tx_len = cpu_to_le16(hdev->le_max_tx_len); | |
| cp.tx_time = cpu_to_le16(hdev->le_max_tx_time); | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_WRITE_DEF_DATA_LEN, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| /* Set Default PHY parameters if command is supported, enables all supported | |
| * PHYs according to the LE Features bits. | |
| */ | |
| static int hci_le_set_default_phy_sync(struct hci_dev *hdev) | |
| { | |
| struct hci_cp_le_set_default_phy cp; | |
| if (!(hdev->commands[35] & 0x20)) { | |
| /* If the command is not supported it means only 1M PHY is | |
| * supported. | |
| */ | |
| hdev->le_tx_def_phys = HCI_LE_SET_PHY_1M; | |
| hdev->le_rx_def_phys = HCI_LE_SET_PHY_1M; | |
| return 0; | |
| } | |
| memset(&cp, 0, sizeof(cp)); | |
| cp.all_phys = 0x00; | |
| cp.tx_phys = HCI_LE_SET_PHY_1M; | |
| cp.rx_phys = HCI_LE_SET_PHY_1M; | |
| /* Enables 2M PHY if supported */ | |
| if (le_2m_capable(hdev)) { | |
| cp.tx_phys |= HCI_LE_SET_PHY_2M; | |
| cp.rx_phys |= HCI_LE_SET_PHY_2M; | |
| } | |
| /* Enables Coded PHY if supported */ | |
| if (le_coded_capable(hdev)) { | |
| cp.tx_phys |= HCI_LE_SET_PHY_CODED; | |
| cp.rx_phys |= HCI_LE_SET_PHY_CODED; | |
| } | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_DEFAULT_PHY, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| static const struct hci_init_stage le_init4[] = { | |
| /* HCI_OP_LE_WRITE_DEF_DATA_LEN */ | |
| HCI_INIT(hci_le_set_write_def_data_len_sync), | |
| /* HCI_OP_LE_SET_DEFAULT_PHY */ | |
| HCI_INIT(hci_le_set_default_phy_sync), | |
| {} | |
| }; | |
| static int hci_init4_sync(struct hci_dev *hdev) | |
| { | |
| int err; | |
| bt_dev_dbg(hdev, ""); | |
| err = hci_init_stage_sync(hdev, hci_init4); | |
| if (err) | |
| return err; | |
| if (lmp_le_capable(hdev)) | |
| return hci_init_stage_sync(hdev, le_init4); | |
| return 0; | |
| } | |
| static int hci_init_sync(struct hci_dev *hdev) | |
| { | |
| int err; | |
| err = hci_init1_sync(hdev); | |
| if (err < 0) | |
| return err; | |
| if (hci_dev_test_flag(hdev, HCI_SETUP)) | |
| hci_debugfs_create_basic(hdev); | |
| err = hci_init2_sync(hdev); | |
| if (err < 0) | |
| return err; | |
| err = hci_init3_sync(hdev); | |
| if (err < 0) | |
| return err; | |
| err = hci_init4_sync(hdev); | |
| if (err < 0) | |
| return err; | |
| /* This function is only called when the controller is actually in | |
| * configured state. When the controller is marked as unconfigured, | |
| * this initialization procedure is not run. | |
| * | |
| * It means that it is possible that a controller runs through its | |
| * setup phase and then discovers missing settings. If that is the | |
| * case, then this function will not be called. It then will only | |
| * be called during the config phase. | |
| * | |
| * So only when in setup phase or config phase, create the debugfs | |
| * entries and register the SMP channels. | |
| */ | |
| if (!hci_dev_test_flag(hdev, HCI_SETUP) && | |
| !hci_dev_test_flag(hdev, HCI_CONFIG)) | |
| return 0; | |
| if (hci_dev_test_and_set_flag(hdev, HCI_DEBUGFS_CREATED)) | |
| return 0; | |
| hci_debugfs_create_common(hdev); | |
| if (lmp_bredr_capable(hdev)) | |
| hci_debugfs_create_bredr(hdev); | |
| if (lmp_le_capable(hdev)) | |
| hci_debugfs_create_le(hdev); | |
| return 0; | |
| } | |
| #define HCI_QUIRK_BROKEN(_quirk, _desc) { HCI_QUIRK_BROKEN_##_quirk, _desc } | |
| static const struct { | |
| unsigned long quirk; | |
| const char *desc; | |
| } hci_broken_table[] = { | |
| HCI_QUIRK_BROKEN(LOCAL_COMMANDS, | |
| "HCI Read Local Supported Commands not supported"), | |
| HCI_QUIRK_BROKEN(STORED_LINK_KEY, | |
| "HCI Delete Stored Link Key command is advertised, " | |
| "but not supported."), | |
| HCI_QUIRK_BROKEN(ERR_DATA_REPORTING, | |
| "HCI Read Default Erroneous Data Reporting command is " | |
| "advertised, but not supported."), | |
| HCI_QUIRK_BROKEN(READ_TRANSMIT_POWER, | |
| "HCI Read Transmit Power Level command is advertised, " | |
| "but not supported."), | |
| HCI_QUIRK_BROKEN(FILTER_CLEAR_ALL, | |
| "HCI Set Event Filter command not supported."), | |
| HCI_QUIRK_BROKEN(ENHANCED_SETUP_SYNC_CONN, | |
| "HCI Enhanced Setup Synchronous Connection command is " | |
| "advertised, but not supported."), | |
| HCI_QUIRK_BROKEN(SET_RPA_TIMEOUT, | |
| "HCI LE Set Random Private Address Timeout command is " | |
| "advertised, but not supported."), | |
| HCI_QUIRK_BROKEN(EXT_CREATE_CONN, | |
| "HCI LE Extended Create Connection command is " | |
| "advertised, but not supported."), | |
| HCI_QUIRK_BROKEN(WRITE_AUTH_PAYLOAD_TIMEOUT, | |
| "HCI WRITE AUTH PAYLOAD TIMEOUT command leads " | |
| "to unexpected SMP errors when pairing " | |
| "and will not be used."), | |
| HCI_QUIRK_BROKEN(LE_CODED, | |
| "HCI LE Coded PHY feature bit is set, " | |
| "but its usage is not supported.") | |
| }; | |
| /* This function handles hdev setup stage: | |
| * | |
| * Calls hdev->setup | |
| * Setup address if HCI_QUIRK_USE_BDADDR_PROPERTY is set. | |
| */ | |
| static int hci_dev_setup_sync(struct hci_dev *hdev) | |
| { | |
| int ret = 0; | |
| bool invalid_bdaddr; | |
| size_t i; | |
| if (!hci_dev_test_flag(hdev, HCI_SETUP) && | |
| !test_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks)) | |
| return 0; | |
| bt_dev_dbg(hdev, ""); | |
| hci_sock_dev_event(hdev, HCI_DEV_SETUP); | |
| if (hdev->setup) | |
| ret = hdev->setup(hdev); | |
| for (i = 0; i < ARRAY_SIZE(hci_broken_table); i++) { | |
| if (test_bit(hci_broken_table[i].quirk, &hdev->quirks)) | |
| bt_dev_warn(hdev, "%s", hci_broken_table[i].desc); | |
| } | |
| /* The transport driver can set the quirk to mark the | |
| * BD_ADDR invalid before creating the HCI device or in | |
| * its setup callback. | |
| */ | |
| invalid_bdaddr = test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks) || | |
| test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks); | |
| if (!ret) { | |
| if (test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks) && | |
| !bacmp(&hdev->public_addr, BDADDR_ANY)) | |
| hci_dev_get_bd_addr_from_property(hdev); | |
| if (invalid_bdaddr && bacmp(&hdev->public_addr, BDADDR_ANY) && | |
| hdev->set_bdaddr) { | |
| ret = hdev->set_bdaddr(hdev, &hdev->public_addr); | |
| if (!ret) | |
| invalid_bdaddr = false; | |
| } | |
| } | |
| /* The transport driver can set these quirks before | |
| * creating the HCI device or in its setup callback. | |
| * | |
| * For the invalid BD_ADDR quirk it is possible that | |
| * it becomes a valid address if the bootloader does | |
| * provide it (see above). | |
| * | |
| * In case any of them is set, the controller has to | |
| * start up as unconfigured. | |
| */ | |
| if (test_bit(HCI_QUIRK_EXTERNAL_CONFIG, &hdev->quirks) || | |
| invalid_bdaddr) | |
| hci_dev_set_flag(hdev, HCI_UNCONFIGURED); | |
| /* For an unconfigured controller it is required to | |
| * read at least the version information provided by | |
| * the Read Local Version Information command. | |
| * | |
| * If the set_bdaddr driver callback is provided, then | |
| * also the original Bluetooth public device address | |
| * will be read using the Read BD Address command. | |
| */ | |
| if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) | |
| return hci_unconf_init_sync(hdev); | |
| return ret; | |
| } | |
| /* This function handles hdev init stage: | |
| * | |
| * Calls hci_dev_setup_sync to perform setup stage | |
| * Calls hci_init_sync to perform HCI command init sequence | |
| */ | |
| static int hci_dev_init_sync(struct hci_dev *hdev) | |
| { | |
| int ret; | |
| bt_dev_dbg(hdev, ""); | |
| atomic_set(&hdev->cmd_cnt, 1); | |
| set_bit(HCI_INIT, &hdev->flags); | |
| ret = hci_dev_setup_sync(hdev); | |
| if (hci_dev_test_flag(hdev, HCI_CONFIG)) { | |
| /* If public address change is configured, ensure that | |
| * the address gets programmed. If the driver does not | |
| * support changing the public address, fail the power | |
| * on procedure. | |
| */ | |
| if (bacmp(&hdev->public_addr, BDADDR_ANY) && | |
| hdev->set_bdaddr) | |
| ret = hdev->set_bdaddr(hdev, &hdev->public_addr); | |
| else | |
| ret = -EADDRNOTAVAIL; | |
| } | |
| if (!ret) { | |
| if (!hci_dev_test_flag(hdev, HCI_UNCONFIGURED) && | |
| !hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { | |
| ret = hci_init_sync(hdev); | |
| if (!ret && hdev->post_init) | |
| ret = hdev->post_init(hdev); | |
| } | |
| } | |
| /* If the HCI Reset command is clearing all diagnostic settings, | |
| * then they need to be reprogrammed after the init procedure | |
| * completed. | |
| */ | |
| if (test_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks) && | |
| !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && | |
| hci_dev_test_flag(hdev, HCI_VENDOR_DIAG) && hdev->set_diag) | |
| ret = hdev->set_diag(hdev, true); | |
| if (!hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { | |
| msft_do_open(hdev); | |
| aosp_do_open(hdev); | |
| } | |
| clear_bit(HCI_INIT, &hdev->flags); | |
| return ret; | |
| } | |
| int hci_dev_open_sync(struct hci_dev *hdev) | |
| { | |
| int ret; | |
| bt_dev_dbg(hdev, ""); | |
| if (hci_dev_test_flag(hdev, HCI_UNREGISTER)) { | |
| ret = -ENODEV; | |
| goto done; | |
| } | |
| if (!hci_dev_test_flag(hdev, HCI_SETUP) && | |
| !hci_dev_test_flag(hdev, HCI_CONFIG)) { | |
| /* Check for rfkill but allow the HCI setup stage to | |
| * proceed (which in itself doesn't cause any RF activity). | |
| */ | |
| if (hci_dev_test_flag(hdev, HCI_RFKILLED)) { | |
| ret = -ERFKILL; | |
| goto done; | |
| } | |
| /* Check for valid public address or a configured static | |
| * random address, but let the HCI setup proceed to | |
| * be able to determine if there is a public address | |
| * or not. | |
| * | |
| * In case of user channel usage, it is not important | |
| * if a public address or static random address is | |
| * available. | |
| */ | |
| if (!hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && | |
| !bacmp(&hdev->bdaddr, BDADDR_ANY) && | |
| !bacmp(&hdev->static_addr, BDADDR_ANY)) { | |
| ret = -EADDRNOTAVAIL; | |
| goto done; | |
| } | |
| } | |
| if (test_bit(HCI_UP, &hdev->flags)) { | |
| ret = -EALREADY; | |
| goto done; | |
| } | |
| if (hdev->open(hdev)) { | |
| ret = -EIO; | |
| goto done; | |
| } | |
| hci_devcd_reset(hdev); | |
| set_bit(HCI_RUNNING, &hdev->flags); | |
| hci_sock_dev_event(hdev, HCI_DEV_OPEN); | |
| ret = hci_dev_init_sync(hdev); | |
| if (!ret) { | |
| hci_dev_hold(hdev); | |
| hci_dev_set_flag(hdev, HCI_RPA_EXPIRED); | |
| hci_adv_instances_set_rpa_expired(hdev, true); | |
| set_bit(HCI_UP, &hdev->flags); | |
| hci_sock_dev_event(hdev, HCI_DEV_UP); | |
| hci_leds_update_powered(hdev, true); | |
| if (!hci_dev_test_flag(hdev, HCI_SETUP) && | |
| !hci_dev_test_flag(hdev, HCI_CONFIG) && | |
| !hci_dev_test_flag(hdev, HCI_UNCONFIGURED) && | |
| !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && | |
| hci_dev_test_flag(hdev, HCI_MGMT)) { | |
| ret = hci_powered_update_sync(hdev); | |
| mgmt_power_on(hdev, ret); | |
| } | |
| } else { | |
| /* Init failed, cleanup */ | |
| flush_work(&hdev->tx_work); | |
| /* Since hci_rx_work() is possible to awake new cmd_work | |
| * it should be flushed first to avoid unexpected call of | |
| * hci_cmd_work() | |
| */ | |
| flush_work(&hdev->rx_work); | |
| flush_work(&hdev->cmd_work); | |
| skb_queue_purge(&hdev->cmd_q); | |
| skb_queue_purge(&hdev->rx_q); | |
| if (hdev->flush) | |
| hdev->flush(hdev); | |
| if (hdev->sent_cmd) { | |
| cancel_delayed_work_sync(&hdev->cmd_timer); | |
| kfree_skb(hdev->sent_cmd); | |
| hdev->sent_cmd = NULL; | |
| } | |
| if (hdev->req_skb) { | |
| kfree_skb(hdev->req_skb); | |
| hdev->req_skb = NULL; | |
| } | |
| clear_bit(HCI_RUNNING, &hdev->flags); | |
| hci_sock_dev_event(hdev, HCI_DEV_CLOSE); | |
| hdev->close(hdev); | |
| hdev->flags &= BIT(HCI_RAW); | |
| } | |
| done: | |
| return ret; | |
| } | |
| /* This function requires the caller holds hdev->lock */ | |
| static void hci_pend_le_actions_clear(struct hci_dev *hdev) | |
| { | |
| struct hci_conn_params *p; | |
| list_for_each_entry(p, &hdev->le_conn_params, list) { | |
| hci_pend_le_list_del_init(p); | |
| if (p->conn) { | |
| hci_conn_drop(p->conn); | |
| hci_conn_put(p->conn); | |
| p->conn = NULL; | |
| } | |
| } | |
| BT_DBG("All LE pending actions cleared"); | |
| } | |
| static int hci_dev_shutdown(struct hci_dev *hdev) | |
| { | |
| int err = 0; | |
| /* Similar to how we first do setup and then set the exclusive access | |
| * bit for userspace, we must first unset userchannel and then clean up. | |
| * Otherwise, the kernel can't properly use the hci channel to clean up | |
| * the controller (some shutdown routines require sending additional | |
| * commands to the controller for example). | |
| */ | |
| bool was_userchannel = | |
| hci_dev_test_and_clear_flag(hdev, HCI_USER_CHANNEL); | |
| if (!hci_dev_test_flag(hdev, HCI_UNREGISTER) && | |
| test_bit(HCI_UP, &hdev->flags)) { | |
| /* Execute vendor specific shutdown routine */ | |
| if (hdev->shutdown) | |
| err = hdev->shutdown(hdev); | |
| } | |
| if (was_userchannel) | |
| hci_dev_set_flag(hdev, HCI_USER_CHANNEL); | |
| return err; | |
| } | |
| int hci_dev_close_sync(struct hci_dev *hdev) | |
| { | |
| bool auto_off; | |
| int err = 0; | |
| bt_dev_dbg(hdev, ""); | |
| cancel_delayed_work(&hdev->power_off); | |
| cancel_delayed_work(&hdev->ncmd_timer); | |
| cancel_delayed_work(&hdev->le_scan_disable); | |
| cancel_delayed_work(&hdev->le_scan_restart); | |
| hci_request_cancel_all(hdev); | |
| if (hdev->adv_instance_timeout) { | |
| cancel_delayed_work_sync(&hdev->adv_instance_expire); | |
| hdev->adv_instance_timeout = 0; | |
| } | |
| err = hci_dev_shutdown(hdev); | |
| if (!test_and_clear_bit(HCI_UP, &hdev->flags)) { | |
| cancel_delayed_work_sync(&hdev->cmd_timer); | |
| return err; | |
| } | |
| hci_leds_update_powered(hdev, false); | |
| /* Flush RX and TX works */ | |
| flush_work(&hdev->tx_work); | |
| flush_work(&hdev->rx_work); | |
| if (hdev->discov_timeout > 0) { | |
| hdev->discov_timeout = 0; | |
| hci_dev_clear_flag(hdev, HCI_DISCOVERABLE); | |
| hci_dev_clear_flag(hdev, HCI_LIMITED_DISCOVERABLE); | |
| } | |
| if (hci_dev_test_and_clear_flag(hdev, HCI_SERVICE_CACHE)) | |
| cancel_delayed_work(&hdev->service_cache); | |
| if (hci_dev_test_flag(hdev, HCI_MGMT)) { | |
| struct adv_info *adv_instance; | |
| cancel_delayed_work_sync(&hdev->rpa_expired); | |
| list_for_each_entry(adv_instance, &hdev->adv_instances, list) | |
| cancel_delayed_work_sync(&adv_instance->rpa_expired_cb); | |
| } | |
| /* Avoid potential lockdep warnings from the *_flush() calls by | |
| * ensuring the workqueue is empty up front. | |
| */ | |
| drain_workqueue(hdev->workqueue); | |
| hci_dev_lock(hdev); | |
| hci_discovery_set_state(hdev, DISCOVERY_STOPPED); | |
| auto_off = hci_dev_test_and_clear_flag(hdev, HCI_AUTO_OFF); | |
| if (!auto_off && !hci_dev_test_flag(hdev, HCI_USER_CHANNEL) && | |
| hci_dev_test_flag(hdev, HCI_MGMT)) | |
| __mgmt_power_off(hdev); | |
| hci_inquiry_cache_flush(hdev); | |
| hci_pend_le_actions_clear(hdev); | |
| hci_conn_hash_flush(hdev); | |
| /* Prevent data races on hdev->smp_data or hdev->smp_bredr_data */ | |
| smp_unregister(hdev); | |
| hci_dev_unlock(hdev); | |
| hci_sock_dev_event(hdev, HCI_DEV_DOWN); | |
| if (!hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) { | |
| aosp_do_close(hdev); | |
| msft_do_close(hdev); | |
| } | |
| if (hdev->flush) | |
| hdev->flush(hdev); | |
| /* Reset device */ | |
| skb_queue_purge(&hdev->cmd_q); | |
| atomic_set(&hdev->cmd_cnt, 1); | |
| if (test_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks) && | |
| !auto_off && !hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) { | |
| set_bit(HCI_INIT, &hdev->flags); | |
| hci_reset_sync(hdev); | |
| clear_bit(HCI_INIT, &hdev->flags); | |
| } | |
| /* flush cmd work */ | |
| flush_work(&hdev->cmd_work); | |
| /* Drop queues */ | |
| skb_queue_purge(&hdev->rx_q); | |
| skb_queue_purge(&hdev->cmd_q); | |
| skb_queue_purge(&hdev->raw_q); | |
| /* Drop last sent command */ | |
| if (hdev->sent_cmd) { | |
| cancel_delayed_work_sync(&hdev->cmd_timer); | |
| kfree_skb(hdev->sent_cmd); | |
| hdev->sent_cmd = NULL; | |
| } | |
| /* Drop last request */ | |
| if (hdev->req_skb) { | |
| kfree_skb(hdev->req_skb); | |
| hdev->req_skb = NULL; | |
| } | |
| clear_bit(HCI_RUNNING, &hdev->flags); | |
| hci_sock_dev_event(hdev, HCI_DEV_CLOSE); | |
| /* After this point our queues are empty and no tasks are scheduled. */ | |
| hdev->close(hdev); | |
| /* Clear flags */ | |
| hdev->flags &= BIT(HCI_RAW); | |
| hci_dev_clear_volatile_flags(hdev); | |
| memset(hdev->eir, 0, sizeof(hdev->eir)); | |
| memset(hdev->dev_class, 0, sizeof(hdev->dev_class)); | |
| bacpy(&hdev->random_addr, BDADDR_ANY); | |
| hci_codec_list_clear(&hdev->local_codecs); | |
| hci_dev_put(hdev); | |
| return err; | |
| } | |
| /* This function perform power on HCI command sequence as follows: | |
| * | |
| * If controller is already up (HCI_UP) performs hci_powered_update_sync | |
| * sequence otherwise run hci_dev_open_sync which will follow with | |
| * hci_powered_update_sync after the init sequence is completed. | |
| */ | |
| static int hci_power_on_sync(struct hci_dev *hdev) | |
| { | |
| int err; | |
| if (test_bit(HCI_UP, &hdev->flags) && | |
| hci_dev_test_flag(hdev, HCI_MGMT) && | |
| hci_dev_test_and_clear_flag(hdev, HCI_AUTO_OFF)) { | |
| cancel_delayed_work(&hdev->power_off); | |
| return hci_powered_update_sync(hdev); | |
| } | |
| err = hci_dev_open_sync(hdev); | |
| if (err < 0) | |
| return err; | |
| /* During the HCI setup phase, a few error conditions are | |
| * ignored and they need to be checked now. If they are still | |
| * valid, it is important to return the device back off. | |
| */ | |
| if (hci_dev_test_flag(hdev, HCI_RFKILLED) || | |
| hci_dev_test_flag(hdev, HCI_UNCONFIGURED) || | |
| (!bacmp(&hdev->bdaddr, BDADDR_ANY) && | |
| !bacmp(&hdev->static_addr, BDADDR_ANY))) { | |
| hci_dev_clear_flag(hdev, HCI_AUTO_OFF); | |
| hci_dev_close_sync(hdev); | |
| } else if (hci_dev_test_flag(hdev, HCI_AUTO_OFF)) { | |
| queue_delayed_work(hdev->req_workqueue, &hdev->power_off, | |
| HCI_AUTO_OFF_TIMEOUT); | |
| } | |
| if (hci_dev_test_and_clear_flag(hdev, HCI_SETUP)) { | |
| /* For unconfigured devices, set the HCI_RAW flag | |
| * so that userspace can easily identify them. | |
| */ | |
| if (hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) | |
| set_bit(HCI_RAW, &hdev->flags); | |
| /* For fully configured devices, this will send | |
| * the Index Added event. For unconfigured devices, | |
| * it will send Unconfigued Index Added event. | |
| * | |
| * Devices with HCI_QUIRK_RAW_DEVICE are ignored | |
| * and no event will be send. | |
| */ | |
| mgmt_index_added(hdev); | |
| } else if (hci_dev_test_and_clear_flag(hdev, HCI_CONFIG)) { | |
| /* When the controller is now configured, then it | |
| * is important to clear the HCI_RAW flag. | |
| */ | |
| if (!hci_dev_test_flag(hdev, HCI_UNCONFIGURED)) | |
| clear_bit(HCI_RAW, &hdev->flags); | |
| /* Powering on the controller with HCI_CONFIG set only | |
| * happens with the transition from unconfigured to | |
| * configured. This will send the Index Added event. | |
| */ | |
| mgmt_index_added(hdev); | |
| } | |
| return 0; | |
| } | |
| static int hci_remote_name_cancel_sync(struct hci_dev *hdev, bdaddr_t *addr) | |
| { | |
| struct hci_cp_remote_name_req_cancel cp; | |
| memset(&cp, 0, sizeof(cp)); | |
| bacpy(&cp.bdaddr, addr); | |
| return __hci_cmd_sync_status(hdev, HCI_OP_REMOTE_NAME_REQ_CANCEL, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| int hci_stop_discovery_sync(struct hci_dev *hdev) | |
| { | |
| struct discovery_state *d = &hdev->discovery; | |
| struct inquiry_entry *e; | |
| int err; | |
| bt_dev_dbg(hdev, "state %u", hdev->discovery.state); | |
| if (d->state == DISCOVERY_FINDING || d->state == DISCOVERY_STOPPING) { | |
| if (test_bit(HCI_INQUIRY, &hdev->flags)) { | |
| err = __hci_cmd_sync_status(hdev, HCI_OP_INQUIRY_CANCEL, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| if (err) | |
| return err; | |
| } | |
| if (hci_dev_test_flag(hdev, HCI_LE_SCAN)) { | |
| cancel_delayed_work(&hdev->le_scan_disable); | |
| cancel_delayed_work(&hdev->le_scan_restart); | |
| err = hci_scan_disable_sync(hdev); | |
| if (err) | |
| return err; | |
| } | |
| } else { | |
| err = hci_scan_disable_sync(hdev); | |
| if (err) | |
| return err; | |
| } | |
| /* Resume advertising if it was paused */ | |
| if (use_ll_privacy(hdev)) | |
| hci_resume_advertising_sync(hdev); | |
| /* No further actions needed for LE-only discovery */ | |
| if (d->type == DISCOV_TYPE_LE) | |
| return 0; | |
| if (d->state == DISCOVERY_RESOLVING || d->state == DISCOVERY_STOPPING) { | |
| e = hci_inquiry_cache_lookup_resolve(hdev, BDADDR_ANY, | |
| NAME_PENDING); | |
| if (!e) | |
| return 0; | |
| /* Ignore cancel errors since it should interfere with stopping | |
| * of the discovery. | |
| */ | |
| hci_remote_name_cancel_sync(hdev, &e->data.bdaddr); | |
| } | |
| return 0; | |
| } | |
| static int hci_disconnect_sync(struct hci_dev *hdev, struct hci_conn *conn, | |
| u8 reason) | |
| { | |
| struct hci_cp_disconnect cp; | |
| if (test_bit(HCI_CONN_BIG_CREATED, &conn->flags)) { | |
| /* This is a BIS connection, hci_conn_del will | |
| * do the necessary cleanup. | |
| */ | |
| hci_dev_lock(hdev); | |
| hci_conn_failed(conn, reason); | |
| hci_dev_unlock(hdev); | |
| return 0; | |
| } | |
| memset(&cp, 0, sizeof(cp)); | |
| cp.handle = cpu_to_le16(conn->handle); | |
| cp.reason = reason; | |
| /* Wait for HCI_EV_DISCONN_COMPLETE, not HCI_EV_CMD_STATUS, when the | |
| * reason is anything but HCI_ERROR_REMOTE_POWER_OFF. This reason is | |
| * used when suspending or powering off, where we don't want to wait | |
| * for the peer's response. | |
| */ | |
| if (reason != HCI_ERROR_REMOTE_POWER_OFF) | |
| return __hci_cmd_sync_status_sk(hdev, HCI_OP_DISCONNECT, | |
| sizeof(cp), &cp, | |
| HCI_EV_DISCONN_COMPLETE, | |
| HCI_CMD_TIMEOUT, NULL); | |
| return __hci_cmd_sync_status(hdev, HCI_OP_DISCONNECT, sizeof(cp), &cp, | |
| HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_le_connect_cancel_sync(struct hci_dev *hdev, | |
| struct hci_conn *conn, u8 reason) | |
| { | |
| /* Return reason if scanning since the connection shall probably be | |
| * cleanup directly. | |
| */ | |
| if (test_bit(HCI_CONN_SCANNING, &conn->flags)) | |
| return reason; | |
| if (conn->role == HCI_ROLE_SLAVE || | |
| test_and_set_bit(HCI_CONN_CANCEL, &conn->flags)) | |
| return 0; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_CREATE_CONN_CANCEL, | |
| 0, NULL, HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_connect_cancel_sync(struct hci_dev *hdev, struct hci_conn *conn, | |
| u8 reason) | |
| { | |
| if (conn->type == LE_LINK) | |
| return hci_le_connect_cancel_sync(hdev, conn, reason); | |
| if (conn->type == ISO_LINK) { | |
| /* BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E | |
| * page 1857: | |
| * | |
| * If this command is issued for a CIS on the Central and the | |
| * CIS is successfully terminated before being established, | |
| * then an HCI_LE_CIS_Established event shall also be sent for | |
| * this CIS with the Status Operation Cancelled by Host (0x44). | |
| */ | |
| if (test_bit(HCI_CONN_CREATE_CIS, &conn->flags)) | |
| return hci_disconnect_sync(hdev, conn, reason); | |
| /* CIS with no Create CIS sent have nothing to cancel */ | |
| if (bacmp(&conn->dst, BDADDR_ANY)) | |
| return HCI_ERROR_LOCAL_HOST_TERM; | |
| /* There is no way to cancel a BIS without terminating the BIG | |
| * which is done later on connection cleanup. | |
| */ | |
| return 0; | |
| } | |
| if (hdev->hci_ver < BLUETOOTH_VER_1_2) | |
| return 0; | |
| /* Wait for HCI_EV_CONN_COMPLETE, not HCI_EV_CMD_STATUS, when the | |
| * reason is anything but HCI_ERROR_REMOTE_POWER_OFF. This reason is | |
| * used when suspending or powering off, where we don't want to wait | |
| * for the peer's response. | |
| */ | |
| if (reason != HCI_ERROR_REMOTE_POWER_OFF) | |
| return __hci_cmd_sync_status_sk(hdev, HCI_OP_CREATE_CONN_CANCEL, | |
| 6, &conn->dst, | |
| HCI_EV_CONN_COMPLETE, | |
| HCI_CMD_TIMEOUT, NULL); | |
| return __hci_cmd_sync_status(hdev, HCI_OP_CREATE_CONN_CANCEL, | |
| 6, &conn->dst, HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_reject_sco_sync(struct hci_dev *hdev, struct hci_conn *conn, | |
| u8 reason) | |
| { | |
| struct hci_cp_reject_sync_conn_req cp; | |
| memset(&cp, 0, sizeof(cp)); | |
| bacpy(&cp.bdaddr, &conn->dst); | |
| cp.reason = reason; | |
| /* SCO rejection has its own limited set of | |
| * allowed error values (0x0D-0x0F). | |
| */ | |
| if (reason < 0x0d || reason > 0x0f) | |
| cp.reason = HCI_ERROR_REJ_LIMITED_RESOURCES; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_REJECT_SYNC_CONN_REQ, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_le_reject_cis_sync(struct hci_dev *hdev, struct hci_conn *conn, | |
| u8 reason) | |
| { | |
| struct hci_cp_le_reject_cis cp; | |
| memset(&cp, 0, sizeof(cp)); | |
| cp.handle = cpu_to_le16(conn->handle); | |
| cp.reason = reason; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_REJECT_CIS, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_reject_conn_sync(struct hci_dev *hdev, struct hci_conn *conn, | |
| u8 reason) | |
| { | |
| struct hci_cp_reject_conn_req cp; | |
| if (conn->type == ISO_LINK) | |
| return hci_le_reject_cis_sync(hdev, conn, reason); | |
| if (conn->type == SCO_LINK || conn->type == ESCO_LINK) | |
| return hci_reject_sco_sync(hdev, conn, reason); | |
| memset(&cp, 0, sizeof(cp)); | |
| bacpy(&cp.bdaddr, &conn->dst); | |
| cp.reason = reason; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_REJECT_CONN_REQ, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| int hci_abort_conn_sync(struct hci_dev *hdev, struct hci_conn *conn, u8 reason) | |
| { | |
| int err = 0; | |
| u16 handle = conn->handle; | |
| bool disconnect = false; | |
| struct hci_conn *c; | |
| switch (conn->state) { | |
| case BT_CONNECTED: | |
| case BT_CONFIG: | |
| err = hci_disconnect_sync(hdev, conn, reason); | |
| break; | |
| case BT_CONNECT: | |
| err = hci_connect_cancel_sync(hdev, conn, reason); | |
| break; | |
| case BT_CONNECT2: | |
| err = hci_reject_conn_sync(hdev, conn, reason); | |
| break; | |
| case BT_OPEN: | |
| case BT_BOUND: | |
| break; | |
| default: | |
| disconnect = true; | |
| break; | |
| } | |
| hci_dev_lock(hdev); | |
| /* Check if the connection has been cleaned up concurrently */ | |
| c = hci_conn_hash_lookup_handle(hdev, handle); | |
| if (!c || c != conn) { | |
| err = 0; | |
| goto unlock; | |
| } | |
| /* Cleanup hci_conn object if it cannot be cancelled as it | |
| * likelly means the controller and host stack are out of sync | |
| * or in case of LE it was still scanning so it can be cleanup | |
| * safely. | |
| */ | |
| if (disconnect) { | |
| conn->state = BT_CLOSED; | |
| hci_disconn_cfm(conn, reason); | |
| hci_conn_del(conn); | |
| } else { | |
| hci_conn_failed(conn, reason); | |
| } | |
| unlock: | |
| hci_dev_unlock(hdev); | |
| return err; | |
| } | |
| static int hci_disconnect_all_sync(struct hci_dev *hdev, u8 reason) | |
| { | |
| struct list_head *head = &hdev->conn_hash.list; | |
| struct hci_conn *conn; | |
| rcu_read_lock(); | |
| while ((conn = list_first_or_null_rcu(head, struct hci_conn, list))) { | |
| /* Make sure the connection is not freed while unlocking */ | |
| conn = hci_conn_get(conn); | |
| rcu_read_unlock(); | |
| /* Disregard possible errors since hci_conn_del shall have been | |
| * called even in case of errors had occurred since it would | |
| * then cause hci_conn_failed to be called which calls | |
| * hci_conn_del internally. | |
| */ | |
| hci_abort_conn_sync(hdev, conn, reason); | |
| hci_conn_put(conn); | |
| rcu_read_lock(); | |
| } | |
| rcu_read_unlock(); | |
| return 0; | |
| } | |
| /* This function perform power off HCI command sequence as follows: | |
| * | |
| * Clear Advertising | |
| * Stop Discovery | |
| * Disconnect all connections | |
| * hci_dev_close_sync | |
| */ | |
| static int hci_power_off_sync(struct hci_dev *hdev) | |
| { | |
| int err; | |
| /* If controller is already down there is nothing to do */ | |
| if (!test_bit(HCI_UP, &hdev->flags)) | |
| return 0; | |
| if (test_bit(HCI_ISCAN, &hdev->flags) || | |
| test_bit(HCI_PSCAN, &hdev->flags)) { | |
| err = hci_write_scan_enable_sync(hdev, 0x00); | |
| if (err) | |
| return err; | |
| } | |
| err = hci_clear_adv_sync(hdev, NULL, false); | |
| if (err) | |
| return err; | |
| err = hci_stop_discovery_sync(hdev); | |
| if (err) | |
| return err; | |
| /* Terminated due to Power Off */ | |
| err = hci_disconnect_all_sync(hdev, HCI_ERROR_REMOTE_POWER_OFF); | |
| if (err) | |
| return err; | |
| return hci_dev_close_sync(hdev); | |
| } | |
| int hci_set_powered_sync(struct hci_dev *hdev, u8 val) | |
| { | |
| if (val) | |
| return hci_power_on_sync(hdev); | |
| return hci_power_off_sync(hdev); | |
| } | |
| static int hci_write_iac_sync(struct hci_dev *hdev) | |
| { | |
| struct hci_cp_write_current_iac_lap cp; | |
| if (!hci_dev_test_flag(hdev, HCI_DISCOVERABLE)) | |
| return 0; | |
| memset(&cp, 0, sizeof(cp)); | |
| if (hci_dev_test_flag(hdev, HCI_LIMITED_DISCOVERABLE)) { | |
| /* Limited discoverable mode */ | |
| cp.num_iac = min_t(u8, hdev->num_iac, 2); | |
| cp.iac_lap[0] = 0x00; /* LIAC */ | |
| cp.iac_lap[1] = 0x8b; | |
| cp.iac_lap[2] = 0x9e; | |
| cp.iac_lap[3] = 0x33; /* GIAC */ | |
| cp.iac_lap[4] = 0x8b; | |
| cp.iac_lap[5] = 0x9e; | |
| } else { | |
| /* General discoverable mode */ | |
| cp.num_iac = 1; | |
| cp.iac_lap[0] = 0x33; /* GIAC */ | |
| cp.iac_lap[1] = 0x8b; | |
| cp.iac_lap[2] = 0x9e; | |
| } | |
| return __hci_cmd_sync_status(hdev, HCI_OP_WRITE_CURRENT_IAC_LAP, | |
| (cp.num_iac * 3) + 1, &cp, | |
| HCI_CMD_TIMEOUT); | |
| } | |
| int hci_update_discoverable_sync(struct hci_dev *hdev) | |
| { | |
| int err = 0; | |
| if (hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) { | |
| err = hci_write_iac_sync(hdev); | |
| if (err) | |
| return err; | |
| err = hci_update_scan_sync(hdev); | |
| if (err) | |
| return err; | |
| err = hci_update_class_sync(hdev); | |
| if (err) | |
| return err; | |
| } | |
| /* Advertising instances don't use the global discoverable setting, so | |
| * only update AD if advertising was enabled using Set Advertising. | |
| */ | |
| if (hci_dev_test_flag(hdev, HCI_ADVERTISING)) { | |
| err = hci_update_adv_data_sync(hdev, 0x00); | |
| if (err) | |
| return err; | |
| /* Discoverable mode affects the local advertising | |
| * address in limited privacy mode. | |
| */ | |
| if (hci_dev_test_flag(hdev, HCI_LIMITED_PRIVACY)) { | |
| if (ext_adv_capable(hdev)) | |
| err = hci_start_ext_adv_sync(hdev, 0x00); | |
| else | |
| err = hci_enable_advertising_sync(hdev); | |
| } | |
| } | |
| return err; | |
| } | |
| static int update_discoverable_sync(struct hci_dev *hdev, void *data) | |
| { | |
| return hci_update_discoverable_sync(hdev); | |
| } | |
| int hci_update_discoverable(struct hci_dev *hdev) | |
| { | |
| /* Only queue if it would have any effect */ | |
| if (hdev_is_powered(hdev) && | |
| hci_dev_test_flag(hdev, HCI_ADVERTISING) && | |
| hci_dev_test_flag(hdev, HCI_DISCOVERABLE) && | |
| hci_dev_test_flag(hdev, HCI_LIMITED_PRIVACY)) | |
| return hci_cmd_sync_queue(hdev, update_discoverable_sync, NULL, | |
| NULL); | |
| return 0; | |
| } | |
| int hci_update_connectable_sync(struct hci_dev *hdev) | |
| { | |
| int err; | |
| err = hci_update_scan_sync(hdev); | |
| if (err) | |
| return err; | |
| /* If BR/EDR is not enabled and we disable advertising as a | |
| * by-product of disabling connectable, we need to update the | |
| * advertising flags. | |
| */ | |
| if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) | |
| err = hci_update_adv_data_sync(hdev, hdev->cur_adv_instance); | |
| /* Update the advertising parameters if necessary */ | |
| if (hci_dev_test_flag(hdev, HCI_ADVERTISING) || | |
| !list_empty(&hdev->adv_instances)) { | |
| if (ext_adv_capable(hdev)) | |
| err = hci_start_ext_adv_sync(hdev, | |
| hdev->cur_adv_instance); | |
| else | |
| err = hci_enable_advertising_sync(hdev); | |
| if (err) | |
| return err; | |
| } | |
| return hci_update_passive_scan_sync(hdev); | |
| } | |
| static int hci_inquiry_sync(struct hci_dev *hdev, u8 length) | |
| { | |
| const u8 giac[3] = { 0x33, 0x8b, 0x9e }; | |
| const u8 liac[3] = { 0x00, 0x8b, 0x9e }; | |
| struct hci_cp_inquiry cp; | |
| bt_dev_dbg(hdev, ""); | |
| if (test_bit(HCI_INQUIRY, &hdev->flags)) | |
| return 0; | |
| hci_dev_lock(hdev); | |
| hci_inquiry_cache_flush(hdev); | |
| hci_dev_unlock(hdev); | |
| memset(&cp, 0, sizeof(cp)); | |
| if (hdev->discovery.limited) | |
| memcpy(&cp.lap, liac, sizeof(cp.lap)); | |
| else | |
| memcpy(&cp.lap, giac, sizeof(cp.lap)); | |
| cp.length = length; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_INQUIRY, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| static int hci_active_scan_sync(struct hci_dev *hdev, uint16_t interval) | |
| { | |
| u8 own_addr_type; | |
| /* Accept list is not used for discovery */ | |
| u8 filter_policy = 0x00; | |
| /* Default is to enable duplicates filter */ | |
| u8 filter_dup = LE_SCAN_FILTER_DUP_ENABLE; | |
| int err; | |
| bt_dev_dbg(hdev, ""); | |
| /* If controller is scanning, it means the passive scanning is | |
| * running. Thus, we should temporarily stop it in order to set the | |
| * discovery scanning parameters. | |
| */ | |
| err = hci_scan_disable_sync(hdev); | |
| if (err) { | |
| bt_dev_err(hdev, "Unable to disable scanning: %d", err); | |
| return err; | |
| } | |
| cancel_interleave_scan(hdev); | |
| /* Pause address resolution for active scan and stop advertising if | |
| * privacy is enabled. | |
| */ | |
| err = hci_pause_addr_resolution(hdev); | |
| if (err) | |
| goto failed; | |
| /* All active scans will be done with either a resolvable private | |
| * address (when privacy feature has been enabled) or non-resolvable | |
| * private address. | |
| */ | |
| err = hci_update_random_address_sync(hdev, true, scan_use_rpa(hdev), | |
| &own_addr_type); | |
| if (err < 0) | |
| own_addr_type = ADDR_LE_DEV_PUBLIC; | |
| if (hci_is_adv_monitoring(hdev)) { | |
| /* Duplicate filter should be disabled when some advertisement | |
| * monitor is activated, otherwise AdvMon can only receive one | |
| * advertisement for one peer(*) during active scanning, and | |
| * might report loss to these peers. | |
| * | |
| * Note that different controllers have different meanings of | |
| * |duplicate|. Some of them consider packets with the same | |
| * address as duplicate, and others consider packets with the | |
| * same address and the same RSSI as duplicate. Although in the | |
| * latter case we don't need to disable duplicate filter, but | |
| * it is common to have active scanning for a short period of | |
| * time, the power impact should be neglectable. | |
| */ | |
| filter_dup = LE_SCAN_FILTER_DUP_DISABLE; | |
| } | |
| err = hci_start_scan_sync(hdev, LE_SCAN_ACTIVE, interval, | |
| hdev->le_scan_window_discovery, | |
| own_addr_type, filter_policy, filter_dup); | |
| if (!err) | |
| return err; | |
| failed: | |
| /* Resume advertising if it was paused */ | |
| if (use_ll_privacy(hdev)) | |
| hci_resume_advertising_sync(hdev); | |
| /* Resume passive scanning */ | |
| hci_update_passive_scan_sync(hdev); | |
| return err; | |
| } | |
| static int hci_start_interleaved_discovery_sync(struct hci_dev *hdev) | |
| { | |
| int err; | |
| bt_dev_dbg(hdev, ""); | |
| err = hci_active_scan_sync(hdev, hdev->le_scan_int_discovery * 2); | |
| if (err) | |
| return err; | |
| return hci_inquiry_sync(hdev, DISCOV_BREDR_INQUIRY_LEN); | |
| } | |
| int hci_start_discovery_sync(struct hci_dev *hdev) | |
| { | |
| unsigned long timeout; | |
| int err; | |
| bt_dev_dbg(hdev, "type %u", hdev->discovery.type); | |
| switch (hdev->discovery.type) { | |
| case DISCOV_TYPE_BREDR: | |
| return hci_inquiry_sync(hdev, DISCOV_BREDR_INQUIRY_LEN); | |
| case DISCOV_TYPE_INTERLEAVED: | |
| /* When running simultaneous discovery, the LE scanning time | |
| * should occupy the whole discovery time sine BR/EDR inquiry | |
| * and LE scanning are scheduled by the controller. | |
| * | |
| * For interleaving discovery in comparison, BR/EDR inquiry | |
| * and LE scanning are done sequentially with separate | |
| * timeouts. | |
| */ | |
| if (test_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, | |
| &hdev->quirks)) { | |
| timeout = msecs_to_jiffies(DISCOV_LE_TIMEOUT); | |
| /* During simultaneous discovery, we double LE scan | |
| * interval. We must leave some time for the controller | |
| * to do BR/EDR inquiry. | |
| */ | |
| err = hci_start_interleaved_discovery_sync(hdev); | |
| break; | |
| } | |
| timeout = msecs_to_jiffies(hdev->discov_interleaved_timeout); | |
| err = hci_active_scan_sync(hdev, hdev->le_scan_int_discovery); | |
| break; | |
| case DISCOV_TYPE_LE: | |
| timeout = msecs_to_jiffies(DISCOV_LE_TIMEOUT); | |
| err = hci_active_scan_sync(hdev, hdev->le_scan_int_discovery); | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| if (err) | |
| return err; | |
| bt_dev_dbg(hdev, "timeout %u ms", jiffies_to_msecs(timeout)); | |
| /* When service discovery is used and the controller has a | |
| * strict duplicate filter, it is important to remember the | |
| * start and duration of the scan. This is required for | |
| * restarting scanning during the discovery phase. | |
| */ | |
| if (test_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks) && | |
| hdev->discovery.result_filtering) { | |
| hdev->discovery.scan_start = jiffies; | |
| hdev->discovery.scan_duration = timeout; | |
| } | |
| queue_delayed_work(hdev->req_workqueue, &hdev->le_scan_disable, | |
| timeout); | |
| return 0; | |
| } | |
| static void hci_suspend_monitor_sync(struct hci_dev *hdev) | |
| { | |
| switch (hci_get_adv_monitor_offload_ext(hdev)) { | |
| case HCI_ADV_MONITOR_EXT_MSFT: | |
| msft_suspend_sync(hdev); | |
| break; | |
| default: | |
| return; | |
| } | |
| } | |
| /* This function disables discovery and mark it as paused */ | |
| static int hci_pause_discovery_sync(struct hci_dev *hdev) | |
| { | |
| int old_state = hdev->discovery.state; | |
| int err; | |
| /* If discovery already stopped/stopping/paused there nothing to do */ | |
| if (old_state == DISCOVERY_STOPPED || old_state == DISCOVERY_STOPPING || | |
| hdev->discovery_paused) | |
| return 0; | |
| hci_discovery_set_state(hdev, DISCOVERY_STOPPING); | |
| err = hci_stop_discovery_sync(hdev); | |
| if (err) | |
| return err; | |
| hdev->discovery_paused = true; | |
| hdev->discovery_old_state = old_state; | |
| hci_discovery_set_state(hdev, DISCOVERY_STOPPED); | |
| return 0; | |
| } | |
| static int hci_update_event_filter_sync(struct hci_dev *hdev) | |
| { | |
| struct bdaddr_list_with_flags *b; | |
| u8 scan = SCAN_DISABLED; | |
| bool scanning = test_bit(HCI_PSCAN, &hdev->flags); | |
| int err; | |
| if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) | |
| return 0; | |
| /* Some fake CSR controllers lock up after setting this type of | |
| * filter, so avoid sending the request altogether. | |
| */ | |
| if (test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks)) | |
| return 0; | |
| /* Always clear event filter when starting */ | |
| hci_clear_event_filter_sync(hdev); | |
| list_for_each_entry(b, &hdev->accept_list, list) { | |
| if (!(b->flags & HCI_CONN_FLAG_REMOTE_WAKEUP)) | |
| continue; | |
| bt_dev_dbg(hdev, "Adding event filters for %pMR", &b->bdaddr); | |
| err = hci_set_event_filter_sync(hdev, HCI_FLT_CONN_SETUP, | |
| HCI_CONN_SETUP_ALLOW_BDADDR, | |
| &b->bdaddr, | |
| HCI_CONN_SETUP_AUTO_ON); | |
| if (err) | |
| bt_dev_dbg(hdev, "Failed to set event filter for %pMR", | |
| &b->bdaddr); | |
| else | |
| scan = SCAN_PAGE; | |
| } | |
| if (scan && !scanning) | |
| hci_write_scan_enable_sync(hdev, scan); | |
| else if (!scan && scanning) | |
| hci_write_scan_enable_sync(hdev, scan); | |
| return 0; | |
| } | |
| /* This function disables scan (BR and LE) and mark it as paused */ | |
| static int hci_pause_scan_sync(struct hci_dev *hdev) | |
| { | |
| if (hdev->scanning_paused) | |
| return 0; | |
| /* Disable page scan if enabled */ | |
| if (test_bit(HCI_PSCAN, &hdev->flags)) | |
| hci_write_scan_enable_sync(hdev, SCAN_DISABLED); | |
| hci_scan_disable_sync(hdev); | |
| hdev->scanning_paused = true; | |
| return 0; | |
| } | |
| /* This function performs the HCI suspend procedures in the follow order: | |
| * | |
| * Pause discovery (active scanning/inquiry) | |
| * Pause Directed Advertising/Advertising | |
| * Pause Scanning (passive scanning in case discovery was not active) | |
| * Disconnect all connections | |
| * Set suspend_status to BT_SUSPEND_DISCONNECT if hdev cannot wakeup | |
| * otherwise: | |
| * Update event mask (only set events that are allowed to wake up the host) | |
| * Update event filter (with devices marked with HCI_CONN_FLAG_REMOTE_WAKEUP) | |
| * Update passive scanning (lower duty cycle) | |
| * Set suspend_status to BT_SUSPEND_CONFIGURE_WAKE | |
| */ | |
| int hci_suspend_sync(struct hci_dev *hdev) | |
| { | |
| int err; | |
| /* If marked as suspended there nothing to do */ | |
| if (hdev->suspended) | |
| return 0; | |
| /* Mark device as suspended */ | |
| hdev->suspended = true; | |
| /* Pause discovery if not already stopped */ | |
| hci_pause_discovery_sync(hdev); | |
| /* Pause other advertisements */ | |
| hci_pause_advertising_sync(hdev); | |
| /* Suspend monitor filters */ | |
| hci_suspend_monitor_sync(hdev); | |
| /* Prevent disconnects from causing scanning to be re-enabled */ | |
| hci_pause_scan_sync(hdev); | |
| if (hci_conn_count(hdev)) { | |
| /* Soft disconnect everything (power off) */ | |
| err = hci_disconnect_all_sync(hdev, HCI_ERROR_REMOTE_POWER_OFF); | |
| if (err) { | |
| /* Set state to BT_RUNNING so resume doesn't notify */ | |
| hdev->suspend_state = BT_RUNNING; | |
| hci_resume_sync(hdev); | |
| return err; | |
| } | |
| /* Update event mask so only the allowed event can wakeup the | |
| * host. | |
| */ | |
| hci_set_event_mask_sync(hdev); | |
| } | |
| /* Only configure accept list if disconnect succeeded and wake | |
| * isn't being prevented. | |
| */ | |
| if (!hdev->wakeup || !hdev->wakeup(hdev)) { | |
| hdev->suspend_state = BT_SUSPEND_DISCONNECT; | |
| return 0; | |
| } | |
| /* Unpause to take care of updating scanning params */ | |
| hdev->scanning_paused = false; | |
| /* Enable event filter for paired devices */ | |
| hci_update_event_filter_sync(hdev); | |
| /* Update LE passive scan if enabled */ | |
| hci_update_passive_scan_sync(hdev); | |
| /* Pause scan changes again. */ | |
| hdev->scanning_paused = true; | |
| hdev->suspend_state = BT_SUSPEND_CONFIGURE_WAKE; | |
| return 0; | |
| } | |
| /* This function resumes discovery */ | |
| static int hci_resume_discovery_sync(struct hci_dev *hdev) | |
| { | |
| int err; | |
| /* If discovery not paused there nothing to do */ | |
| if (!hdev->discovery_paused) | |
| return 0; | |
| hdev->discovery_paused = false; | |
| hci_discovery_set_state(hdev, DISCOVERY_STARTING); | |
| err = hci_start_discovery_sync(hdev); | |
| hci_discovery_set_state(hdev, err ? DISCOVERY_STOPPED : | |
| DISCOVERY_FINDING); | |
| return err; | |
| } | |
| static void hci_resume_monitor_sync(struct hci_dev *hdev) | |
| { | |
| switch (hci_get_adv_monitor_offload_ext(hdev)) { | |
| case HCI_ADV_MONITOR_EXT_MSFT: | |
| msft_resume_sync(hdev); | |
| break; | |
| default: | |
| return; | |
| } | |
| } | |
| /* This function resume scan and reset paused flag */ | |
| static int hci_resume_scan_sync(struct hci_dev *hdev) | |
| { | |
| if (!hdev->scanning_paused) | |
| return 0; | |
| hdev->scanning_paused = false; | |
| hci_update_scan_sync(hdev); | |
| /* Reset passive scanning to normal */ | |
| hci_update_passive_scan_sync(hdev); | |
| return 0; | |
| } | |
| /* This function performs the HCI suspend procedures in the follow order: | |
| * | |
| * Restore event mask | |
| * Clear event filter | |
| * Update passive scanning (normal duty cycle) | |
| * Resume Directed Advertising/Advertising | |
| * Resume discovery (active scanning/inquiry) | |
| */ | |
| int hci_resume_sync(struct hci_dev *hdev) | |
| { | |
| /* If not marked as suspended there nothing to do */ | |
| if (!hdev->suspended) | |
| return 0; | |
| hdev->suspended = false; | |
| /* Restore event mask */ | |
| hci_set_event_mask_sync(hdev); | |
| /* Clear any event filters and restore scan state */ | |
| hci_clear_event_filter_sync(hdev); | |
| /* Resume scanning */ | |
| hci_resume_scan_sync(hdev); | |
| /* Resume monitor filters */ | |
| hci_resume_monitor_sync(hdev); | |
| /* Resume other advertisements */ | |
| hci_resume_advertising_sync(hdev); | |
| /* Resume discovery */ | |
| hci_resume_discovery_sync(hdev); | |
| return 0; | |
| } | |
| static bool conn_use_rpa(struct hci_conn *conn) | |
| { | |
| struct hci_dev *hdev = conn->hdev; | |
| return hci_dev_test_flag(hdev, HCI_PRIVACY); | |
| } | |
| static int hci_le_ext_directed_advertising_sync(struct hci_dev *hdev, | |
| struct hci_conn *conn) | |
| { | |
| struct hci_cp_le_set_ext_adv_params cp; | |
| struct hci_rp_le_set_ext_adv_params rp; | |
| int err; | |
| bdaddr_t random_addr; | |
| u8 own_addr_type; | |
| err = hci_update_random_address_sync(hdev, false, conn_use_rpa(conn), | |
| &own_addr_type); | |
| if (err) | |
| return err; | |
| /* Set require_privacy to false so that the remote device has a | |
| * chance of identifying us. | |
| */ | |
| err = hci_get_random_address(hdev, false, conn_use_rpa(conn), NULL, | |
| &own_addr_type, &random_addr); | |
| if (err) | |
| return err; | |
| memset(&cp, 0, sizeof(cp)); | |
| cp.evt_properties = cpu_to_le16(LE_LEGACY_ADV_DIRECT_IND); | |
| cp.channel_map = hdev->le_adv_channel_map; | |
| cp.tx_power = HCI_TX_POWER_INVALID; | |
| cp.primary_phy = HCI_ADV_PHY_1M; | |
| cp.secondary_phy = HCI_ADV_PHY_1M; | |
| cp.handle = 0x00; /* Use instance 0 for directed adv */ | |
| cp.own_addr_type = own_addr_type; | |
| cp.peer_addr_type = conn->dst_type; | |
| bacpy(&cp.peer_addr, &conn->dst); | |
| /* As per Core Spec 5.2 Vol 2, PART E, Sec 7.8.53, for | |
| * advertising_event_property LE_LEGACY_ADV_DIRECT_IND | |
| * does not supports advertising data when the advertising set already | |
| * contains some, the controller shall return erroc code 'Invalid | |
| * HCI Command Parameters(0x12). | |
| * So it is required to remove adv set for handle 0x00. since we use | |
| * instance 0 for directed adv. | |
| */ | |
| err = hci_remove_ext_adv_instance_sync(hdev, cp.handle, NULL); | |
| if (err) | |
| return err; | |
| err = hci_set_ext_adv_params_sync(hdev, NULL, &cp, &rp); | |
| if (err) | |
| return err; | |
| /* Update adv data as tx power is known now */ | |
| err = hci_set_ext_adv_data_sync(hdev, cp.handle); | |
| if (err) | |
| return err; | |
| /* Check if random address need to be updated */ | |
| if (own_addr_type == ADDR_LE_DEV_RANDOM && | |
| bacmp(&random_addr, BDADDR_ANY) && | |
| bacmp(&random_addr, &hdev->random_addr)) { | |
| err = hci_set_adv_set_random_addr_sync(hdev, 0x00, | |
| &random_addr); | |
| if (err) | |
| return err; | |
| } | |
| return hci_enable_ext_advertising_sync(hdev, 0x00); | |
| } | |
| static int hci_le_directed_advertising_sync(struct hci_dev *hdev, | |
| struct hci_conn *conn) | |
| { | |
| struct hci_cp_le_set_adv_param cp; | |
| u8 status; | |
| u8 own_addr_type; | |
| u8 enable; | |
| if (ext_adv_capable(hdev)) | |
| return hci_le_ext_directed_advertising_sync(hdev, conn); | |
| /* Clear the HCI_LE_ADV bit temporarily so that the | |
| * hci_update_random_address knows that it's safe to go ahead | |
| * and write a new random address. The flag will be set back on | |
| * as soon as the SET_ADV_ENABLE HCI command completes. | |
| */ | |
| hci_dev_clear_flag(hdev, HCI_LE_ADV); | |
| /* Set require_privacy to false so that the remote device has a | |
| * chance of identifying us. | |
| */ | |
| status = hci_update_random_address_sync(hdev, false, conn_use_rpa(conn), | |
| &own_addr_type); | |
| if (status) | |
| return status; | |
| memset(&cp, 0, sizeof(cp)); | |
| /* Some controllers might reject command if intervals are not | |
| * within range for undirected advertising. | |
| * BCM20702A0 is known to be affected by this. | |
| */ | |
| cp.min_interval = cpu_to_le16(0x0020); | |
| cp.max_interval = cpu_to_le16(0x0020); | |
| cp.type = LE_ADV_DIRECT_IND; | |
| cp.own_address_type = own_addr_type; | |
| cp.direct_addr_type = conn->dst_type; | |
| bacpy(&cp.direct_addr, &conn->dst); | |
| cp.channel_map = hdev->le_adv_channel_map; | |
| status = __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_ADV_PARAM, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| if (status) | |
| return status; | |
| enable = 0x01; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_ADV_ENABLE, | |
| sizeof(enable), &enable, HCI_CMD_TIMEOUT); | |
| } | |
| static void set_ext_conn_params(struct hci_conn *conn, | |
| struct hci_cp_le_ext_conn_param *p) | |
| { | |
| struct hci_dev *hdev = conn->hdev; | |
| memset(p, 0, sizeof(*p)); | |
| p->scan_interval = cpu_to_le16(hdev->le_scan_int_connect); | |
| p->scan_window = cpu_to_le16(hdev->le_scan_window_connect); | |
| p->conn_interval_min = cpu_to_le16(conn->le_conn_min_interval); | |
| p->conn_interval_max = cpu_to_le16(conn->le_conn_max_interval); | |
| p->conn_latency = cpu_to_le16(conn->le_conn_latency); | |
| p->supervision_timeout = cpu_to_le16(conn->le_supv_timeout); | |
| p->min_ce_len = cpu_to_le16(0x0000); | |
| p->max_ce_len = cpu_to_le16(0x0000); | |
| } | |
| static int hci_le_ext_create_conn_sync(struct hci_dev *hdev, | |
| struct hci_conn *conn, u8 own_addr_type) | |
| { | |
| struct hci_cp_le_ext_create_conn *cp; | |
| struct hci_cp_le_ext_conn_param *p; | |
| u8 data[sizeof(*cp) + sizeof(*p) * 3]; | |
| u32 plen; | |
| cp = (void *)data; | |
| p = (void *)cp->data; | |
| memset(cp, 0, sizeof(*cp)); | |
| bacpy(&cp->peer_addr, &conn->dst); | |
| cp->peer_addr_type = conn->dst_type; | |
| cp->own_addr_type = own_addr_type; | |
| plen = sizeof(*cp); | |
| if (scan_1m(hdev)) { | |
| cp->phys |= LE_SCAN_PHY_1M; | |
| set_ext_conn_params(conn, p); | |
| p++; | |
| plen += sizeof(*p); | |
| } | |
| if (scan_2m(hdev)) { | |
| cp->phys |= LE_SCAN_PHY_2M; | |
| set_ext_conn_params(conn, p); | |
| p++; | |
| plen += sizeof(*p); | |
| } | |
| if (scan_coded(hdev)) { | |
| cp->phys |= LE_SCAN_PHY_CODED; | |
| set_ext_conn_params(conn, p); | |
| plen += sizeof(*p); | |
| } | |
| return __hci_cmd_sync_status_sk(hdev, HCI_OP_LE_EXT_CREATE_CONN, | |
| plen, data, | |
| HCI_EV_LE_ENHANCED_CONN_COMPLETE, | |
| conn->conn_timeout, NULL); | |
| } | |
| static int hci_le_create_conn_sync(struct hci_dev *hdev, void *data) | |
| { | |
| struct hci_cp_le_create_conn cp; | |
| struct hci_conn_params *params; | |
| u8 own_addr_type; | |
| int err; | |
| struct hci_conn *conn = data; | |
| if (!hci_conn_valid(hdev, conn)) | |
| return -ECANCELED; | |
| bt_dev_dbg(hdev, "conn %p", conn); | |
| clear_bit(HCI_CONN_SCANNING, &conn->flags); | |
| conn->state = BT_CONNECT; | |
| /* If requested to connect as peripheral use directed advertising */ | |
| if (conn->role == HCI_ROLE_SLAVE) { | |
| /* If we're active scanning and simultaneous roles is not | |
| * enabled simply reject the attempt. | |
| */ | |
| if (hci_dev_test_flag(hdev, HCI_LE_SCAN) && | |
| hdev->le_scan_type == LE_SCAN_ACTIVE && | |
| !hci_dev_test_flag(hdev, HCI_LE_SIMULTANEOUS_ROLES)) { | |
| hci_conn_del(conn); | |
| return -EBUSY; | |
| } | |
| /* Pause advertising while doing directed advertising. */ | |
| hci_pause_advertising_sync(hdev); | |
| err = hci_le_directed_advertising_sync(hdev, conn); | |
| goto done; | |
| } | |
| /* Disable advertising if simultaneous roles is not in use. */ | |
| if (!hci_dev_test_flag(hdev, HCI_LE_SIMULTANEOUS_ROLES)) | |
| hci_pause_advertising_sync(hdev); | |
| params = hci_conn_params_lookup(hdev, &conn->dst, conn->dst_type); | |
| if (params) { | |
| conn->le_conn_min_interval = params->conn_min_interval; | |
| conn->le_conn_max_interval = params->conn_max_interval; | |
| conn->le_conn_latency = params->conn_latency; | |
| conn->le_supv_timeout = params->supervision_timeout; | |
| } else { | |
| conn->le_conn_min_interval = hdev->le_conn_min_interval; | |
| conn->le_conn_max_interval = hdev->le_conn_max_interval; | |
| conn->le_conn_latency = hdev->le_conn_latency; | |
| conn->le_supv_timeout = hdev->le_supv_timeout; | |
| } | |
| /* If controller is scanning, we stop it since some controllers are | |
| * not able to scan and connect at the same time. Also set the | |
| * HCI_LE_SCAN_INTERRUPTED flag so that the command complete | |
| * handler for scan disabling knows to set the correct discovery | |
| * state. | |
| */ | |
| if (hci_dev_test_flag(hdev, HCI_LE_SCAN)) { | |
| hci_scan_disable_sync(hdev); | |
| hci_dev_set_flag(hdev, HCI_LE_SCAN_INTERRUPTED); | |
| } | |
| /* Update random address, but set require_privacy to false so | |
| * that we never connect with an non-resolvable address. | |
| */ | |
| err = hci_update_random_address_sync(hdev, false, conn_use_rpa(conn), | |
| &own_addr_type); | |
| if (err) | |
| goto done; | |
| /* Send command LE Extended Create Connection if supported */ | |
| if (use_ext_conn(hdev)) { | |
| err = hci_le_ext_create_conn_sync(hdev, conn, own_addr_type); | |
| goto done; | |
| } | |
| memset(&cp, 0, sizeof(cp)); | |
| cp.scan_interval = cpu_to_le16(hdev->le_scan_int_connect); | |
| cp.scan_window = cpu_to_le16(hdev->le_scan_window_connect); | |
| bacpy(&cp.peer_addr, &conn->dst); | |
| cp.peer_addr_type = conn->dst_type; | |
| cp.own_address_type = own_addr_type; | |
| cp.conn_interval_min = cpu_to_le16(conn->le_conn_min_interval); | |
| cp.conn_interval_max = cpu_to_le16(conn->le_conn_max_interval); | |
| cp.conn_latency = cpu_to_le16(conn->le_conn_latency); | |
| cp.supervision_timeout = cpu_to_le16(conn->le_supv_timeout); | |
| cp.min_ce_len = cpu_to_le16(0x0000); | |
| cp.max_ce_len = cpu_to_le16(0x0000); | |
| /* BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E page 2261: | |
| * | |
| * If this event is unmasked and the HCI_LE_Connection_Complete event | |
| * is unmasked, only the HCI_LE_Enhanced_Connection_Complete event is | |
| * sent when a new connection has been created. | |
| */ | |
| err = __hci_cmd_sync_status_sk(hdev, HCI_OP_LE_CREATE_CONN, | |
| sizeof(cp), &cp, | |
| use_enhanced_conn_complete(hdev) ? | |
| HCI_EV_LE_ENHANCED_CONN_COMPLETE : | |
| HCI_EV_LE_CONN_COMPLETE, | |
| conn->conn_timeout, NULL); | |
| done: | |
| if (err == -ETIMEDOUT) | |
| hci_le_connect_cancel_sync(hdev, conn, 0x00); | |
| /* Re-enable advertising after the connection attempt is finished. */ | |
| hci_resume_advertising_sync(hdev); | |
| return err; | |
| } | |
| int hci_le_create_cis_sync(struct hci_dev *hdev) | |
| { | |
| struct { | |
| struct hci_cp_le_create_cis cp; | |
| struct hci_cis cis[0x1f]; | |
| } cmd; | |
| struct hci_conn *conn; | |
| u8 cig = BT_ISO_QOS_CIG_UNSET; | |
| /* The spec allows only one pending LE Create CIS command at a time. If | |
| * the command is pending now, don't do anything. We check for pending | |
| * connections after each CIS Established event. | |
| * | |
| * BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E | |
| * page 2566: | |
| * | |
| * If the Host issues this command before all the | |
| * HCI_LE_CIS_Established events from the previous use of the | |
| * command have been generated, the Controller shall return the | |
| * error code Command Disallowed (0x0C). | |
| * | |
| * BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E | |
| * page 2567: | |
| * | |
| * When the Controller receives the HCI_LE_Create_CIS command, the | |
| * Controller sends the HCI_Command_Status event to the Host. An | |
| * HCI_LE_CIS_Established event will be generated for each CIS when it | |
| * is established or if it is disconnected or considered lost before | |
| * being established; until all the events are generated, the command | |
| * remains pending. | |
| */ | |
| memset(&cmd, 0, sizeof(cmd)); | |
| hci_dev_lock(hdev); | |
| rcu_read_lock(); | |
| /* Wait until previous Create CIS has completed */ | |
| list_for_each_entry_rcu(conn, &hdev->conn_hash.list, list) { | |
| if (test_bit(HCI_CONN_CREATE_CIS, &conn->flags)) | |
| goto done; | |
| } | |
| /* Find CIG with all CIS ready */ | |
| list_for_each_entry_rcu(conn, &hdev->conn_hash.list, list) { | |
| struct hci_conn *link; | |
| if (hci_conn_check_create_cis(conn)) | |
| continue; | |
| cig = conn->iso_qos.ucast.cig; | |
| list_for_each_entry_rcu(link, &hdev->conn_hash.list, list) { | |
| if (hci_conn_check_create_cis(link) > 0 && | |
| link->iso_qos.ucast.cig == cig && | |
| link->state != BT_CONNECTED) { | |
| cig = BT_ISO_QOS_CIG_UNSET; | |
| break; | |
| } | |
| } | |
| if (cig != BT_ISO_QOS_CIG_UNSET) | |
| break; | |
| } | |
| if (cig == BT_ISO_QOS_CIG_UNSET) | |
| goto done; | |
| list_for_each_entry_rcu(conn, &hdev->conn_hash.list, list) { | |
| struct hci_cis *cis = &cmd.cis[cmd.cp.num_cis]; | |
| if (hci_conn_check_create_cis(conn) || | |
| conn->iso_qos.ucast.cig != cig) | |
| continue; | |
| set_bit(HCI_CONN_CREATE_CIS, &conn->flags); | |
| cis->acl_handle = cpu_to_le16(conn->parent->handle); | |
| cis->cis_handle = cpu_to_le16(conn->handle); | |
| cmd.cp.num_cis++; | |
| if (cmd.cp.num_cis >= ARRAY_SIZE(cmd.cis)) | |
| break; | |
| } | |
| done: | |
| rcu_read_unlock(); | |
| hci_dev_unlock(hdev); | |
| if (!cmd.cp.num_cis) | |
| return 0; | |
| /* Wait for HCI_LE_CIS_Established */ | |
| return __hci_cmd_sync_status_sk(hdev, HCI_OP_LE_CREATE_CIS, | |
| sizeof(cmd.cp) + sizeof(cmd.cis[0]) * | |
| cmd.cp.num_cis, &cmd, | |
| HCI_EVT_LE_CIS_ESTABLISHED, | |
| conn->conn_timeout, NULL); | |
| } | |
| int hci_le_remove_cig_sync(struct hci_dev *hdev, u8 handle) | |
| { | |
| struct hci_cp_le_remove_cig cp; | |
| memset(&cp, 0, sizeof(cp)); | |
| cp.cig_id = handle; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_REMOVE_CIG, sizeof(cp), | |
| &cp, HCI_CMD_TIMEOUT); | |
| } | |
| int hci_le_big_terminate_sync(struct hci_dev *hdev, u8 handle) | |
| { | |
| struct hci_cp_le_big_term_sync cp; | |
| memset(&cp, 0, sizeof(cp)); | |
| cp.handle = handle; | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_BIG_TERM_SYNC, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| int hci_le_pa_terminate_sync(struct hci_dev *hdev, u16 handle) | |
| { | |
| struct hci_cp_le_pa_term_sync cp; | |
| memset(&cp, 0, sizeof(cp)); | |
| cp.handle = cpu_to_le16(handle); | |
| return __hci_cmd_sync_status(hdev, HCI_OP_LE_PA_TERM_SYNC, | |
| sizeof(cp), &cp, HCI_CMD_TIMEOUT); | |
| } | |
| int hci_get_random_address(struct hci_dev *hdev, bool require_privacy, | |
| bool use_rpa, struct adv_info *adv_instance, | |
| u8 *own_addr_type, bdaddr_t *rand_addr) | |
| { | |
| int err; | |
| bacpy(rand_addr, BDADDR_ANY); | |
| /* If privacy is enabled use a resolvable private address. If | |
| * current RPA has expired then generate a new one. | |
| */ | |
| if (use_rpa) { | |
| /* If Controller supports LL Privacy use own address type is | |
| * 0x03 | |
| */ | |
| if (use_ll_privacy(hdev)) | |
| *own_addr_type = ADDR_LE_DEV_RANDOM_RESOLVED; | |
| else | |
| *own_addr_type = ADDR_LE_DEV_RANDOM; | |
| if (adv_instance) { | |
| if (adv_rpa_valid(adv_instance)) | |
| return 0; | |
| } else { | |
| if (rpa_valid(hdev)) | |
| return 0; | |
| } | |
| err = smp_generate_rpa(hdev, hdev->irk, &hdev->rpa); | |
| if (err < 0) { | |
| bt_dev_err(hdev, "failed to generate new RPA"); | |
| return err; | |
| } | |
| bacpy(rand_addr, &hdev->rpa); | |
| return 0; | |
| } | |
| /* In case of required privacy without resolvable private address, | |
| * use an non-resolvable private address. This is useful for | |
| * non-connectable advertising. | |
| */ | |
| if (require_privacy) { | |
| bdaddr_t nrpa; | |
| while (true) { | |
| /* The non-resolvable private address is generated | |
| * from random six bytes with the two most significant | |
| * bits cleared. | |
| */ | |
| get_random_bytes(&nrpa, 6); | |
| nrpa.b[5] &= 0x3f; | |
| /* The non-resolvable private address shall not be | |
| * equal to the public address. | |
| */ | |
| if (bacmp(&hdev->bdaddr, &nrpa)) | |
| break; | |
| } | |
| *own_addr_type = ADDR_LE_DEV_RANDOM; | |
| bacpy(rand_addr, &nrpa); | |
| return 0; | |
| } | |
| /* No privacy, use the current address */ | |
| hci_copy_identity_address(hdev, rand_addr, own_addr_type); | |
| return 0; | |
| } | |
| static int _update_adv_data_sync(struct hci_dev *hdev, void *data) | |
| { | |
| u8 instance = PTR_UINT(data); | |
| return hci_update_adv_data_sync(hdev, instance); | |
| } | |
| int hci_update_adv_data(struct hci_dev *hdev, u8 instance) | |
| { | |
| return hci_cmd_sync_queue(hdev, _update_adv_data_sync, | |
| UINT_PTR(instance), NULL); | |
| } | |
| static int hci_acl_create_conn_sync(struct hci_dev *hdev, void *data) | |
| { | |
| struct hci_conn *conn = data; | |
| struct inquiry_entry *ie; | |
| struct hci_cp_create_conn cp; | |
| int err; | |
| if (!hci_conn_valid(hdev, conn)) | |
| return -ECANCELED; | |
| /* Many controllers disallow HCI Create Connection while it is doing | |
| * HCI Inquiry. So we cancel the Inquiry first before issuing HCI Create | |
| * Connection. This may cause the MGMT discovering state to become false | |
| * without user space's request but it is okay since the MGMT Discovery | |
| * APIs do not promise that discovery should be done forever. Instead, | |
| * the user space monitors the status of MGMT discovering and it may | |
| * request for discovery again when this flag becomes false. | |
| */ | |
| if (test_bit(HCI_INQUIRY, &hdev->flags)) { | |
| err = __hci_cmd_sync_status(hdev, HCI_OP_INQUIRY_CANCEL, 0, | |
| NULL, HCI_CMD_TIMEOUT); | |
| if (err) | |
| bt_dev_warn(hdev, "Failed to cancel inquiry %d", err); | |
| } | |
| conn->state = BT_CONNECT; | |
| conn->out = true; | |
| conn->role = HCI_ROLE_MASTER; | |
| conn->attempt++; | |
| conn->link_policy = hdev->link_policy; | |
| memset(&cp, 0, sizeof(cp)); | |
| bacpy(&cp.bdaddr, &conn->dst); | |
| cp.pscan_rep_mode = 0x02; | |
| ie = hci_inquiry_cache_lookup(hdev, &conn->dst); | |
| if (ie) { | |
| if (inquiry_entry_age(ie) <= INQUIRY_ENTRY_AGE_MAX) { | |
| cp.pscan_rep_mode = ie->data.pscan_rep_mode; | |
| cp.pscan_mode = ie->data.pscan_mode; | |
| cp.clock_offset = ie->data.clock_offset | | |
| cpu_to_le16(0x8000); | |
| } | |
| memcpy(conn->dev_class, ie->data.dev_class, 3); | |
| } | |
| cp.pkt_type = cpu_to_le16(conn->pkt_type); | |
| if (lmp_rswitch_capable(hdev) && !(hdev->link_mode & HCI_LM_MASTER)) | |
| cp.role_switch = 0x01; | |
| else | |
| cp.role_switch = 0x00; | |
| return __hci_cmd_sync_status_sk(hdev, HCI_OP_CREATE_CONN, | |
| sizeof(cp), &cp, | |
| HCI_EV_CONN_COMPLETE, | |
| conn->conn_timeout, NULL); | |
| } | |
| int hci_connect_acl_sync(struct hci_dev *hdev, struct hci_conn *conn) | |
| { | |
| return hci_cmd_sync_queue_once(hdev, hci_acl_create_conn_sync, conn, | |
| NULL); | |
| } | |
| static void create_le_conn_complete(struct hci_dev *hdev, void *data, int err) | |
| { | |
| struct hci_conn *conn = data; | |
| bt_dev_dbg(hdev, "err %d", err); | |
| if (err == -ECANCELED) | |
| return; | |
| hci_dev_lock(hdev); | |
| if (!hci_conn_valid(hdev, conn)) | |
| goto done; | |
| if (!err) { | |
| hci_connect_le_scan_cleanup(conn, 0x00); | |
| goto done; | |
| } | |
| /* Check if connection is still pending */ | |
| if (conn != hci_lookup_le_connect(hdev)) | |
| goto done; | |
| /* Flush to make sure we send create conn cancel command if needed */ | |
| flush_delayed_work(&conn->le_conn_timeout); | |
| hci_conn_failed(conn, bt_status(err)); | |
| done: | |
| hci_dev_unlock(hdev); | |
| } | |
| int hci_connect_le_sync(struct hci_dev *hdev, struct hci_conn *conn) | |
| { | |
| return hci_cmd_sync_queue_once(hdev, hci_le_create_conn_sync, conn, | |
| create_le_conn_complete); | |
| } | |
| int hci_cancel_connect_sync(struct hci_dev *hdev, struct hci_conn *conn) | |
| { | |
| if (conn->state != BT_OPEN) | |
| return -EINVAL; | |
| switch (conn->type) { | |
| case ACL_LINK: | |
| return !hci_cmd_sync_dequeue_once(hdev, | |
| hci_acl_create_conn_sync, | |
| conn, NULL); | |
| case LE_LINK: | |
| return !hci_cmd_sync_dequeue_once(hdev, hci_le_create_conn_sync, | |
| conn, create_le_conn_complete); | |
| } | |
| return -ENOENT; | |
| } |