| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * I2C client/driver for the ST M41T80 family of i2c rtc chips. | |
| * | |
| * Author: Alexander Bigga <ab@mycable.de> | |
| * | |
| * Based on m41t00.c by Mark A. Greer <mgreer@mvista.com> | |
| * | |
| * 2006 (c) mycable GmbH | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/bcd.h> | |
| #include <linux/clk-provider.h> | |
| #include <linux/i2c.h> | |
| #include <linux/init.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/rtc.h> | |
| #include <linux/slab.h> | |
| #include <linux/mutex.h> | |
| #include <linux/string.h> | |
| #ifdef CONFIG_RTC_DRV_M41T80_WDT | |
| #include <linux/fs.h> | |
| #include <linux/ioctl.h> | |
| #include <linux/miscdevice.h> | |
| #include <linux/reboot.h> | |
| #include <linux/watchdog.h> | |
| #endif | |
| #define M41T80_REG_SSEC 0x00 | |
| #define M41T80_REG_SEC 0x01 | |
| #define M41T80_REG_MIN 0x02 | |
| #define M41T80_REG_HOUR 0x03 | |
| #define M41T80_REG_WDAY 0x04 | |
| #define M41T80_REG_DAY 0x05 | |
| #define M41T80_REG_MON 0x06 | |
| #define M41T80_REG_YEAR 0x07 | |
| #define M41T80_REG_ALARM_MON 0x0a | |
| #define M41T80_REG_ALARM_DAY 0x0b | |
| #define M41T80_REG_ALARM_HOUR 0x0c | |
| #define M41T80_REG_ALARM_MIN 0x0d | |
| #define M41T80_REG_ALARM_SEC 0x0e | |
| #define M41T80_REG_FLAGS 0x0f | |
| #define M41T80_REG_SQW 0x13 | |
| #define M41T80_DATETIME_REG_SIZE (M41T80_REG_YEAR + 1) | |
| #define M41T80_ALARM_REG_SIZE \ | |
| (M41T80_REG_ALARM_SEC + 1 - M41T80_REG_ALARM_MON) | |
| #define M41T80_SQW_MAX_FREQ 32768 | |
| #define M41T80_SEC_ST BIT(7) /* ST: Stop Bit */ | |
| #define M41T80_ALMON_AFE BIT(7) /* AFE: AF Enable Bit */ | |
| #define M41T80_ALMON_SQWE BIT(6) /* SQWE: SQW Enable Bit */ | |
| #define M41T80_ALHOUR_HT BIT(6) /* HT: Halt Update Bit */ | |
| #define M41T80_FLAGS_OF BIT(2) /* OF: Oscillator Failure Bit */ | |
| #define M41T80_FLAGS_AF BIT(6) /* AF: Alarm Flag Bit */ | |
| #define M41T80_FLAGS_BATT_LOW BIT(4) /* BL: Battery Low Bit */ | |
| #define M41T80_WATCHDOG_RB2 BIT(7) /* RB: Watchdog resolution */ | |
| #define M41T80_WATCHDOG_RB1 BIT(1) /* RB: Watchdog resolution */ | |
| #define M41T80_WATCHDOG_RB0 BIT(0) /* RB: Watchdog resolution */ | |
| #define M41T80_FEATURE_HT BIT(0) /* Halt feature */ | |
| #define M41T80_FEATURE_BL BIT(1) /* Battery low indicator */ | |
| #define M41T80_FEATURE_SQ BIT(2) /* Squarewave feature */ | |
| #define M41T80_FEATURE_WD BIT(3) /* Extra watchdog resolution */ | |
| #define M41T80_FEATURE_SQ_ALT BIT(4) /* RSx bits are in reg 4 */ | |
| static const struct i2c_device_id m41t80_id[] = { | |
| { "m41t62", M41T80_FEATURE_SQ | M41T80_FEATURE_SQ_ALT }, | |
| { "m41t65", M41T80_FEATURE_HT | M41T80_FEATURE_WD }, | |
| { "m41t80", M41T80_FEATURE_SQ }, | |
| { "m41t81", M41T80_FEATURE_HT | M41T80_FEATURE_SQ}, | |
| { "m41t81s", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ }, | |
| { "m41t82", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ }, | |
| { "m41t83", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ }, | |
| { "m41st84", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ }, | |
| { "m41st85", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ }, | |
| { "m41st87", M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ }, | |
| { "rv4162", M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, m41t80_id); | |
| static const __maybe_unused struct of_device_id m41t80_of_match[] = { | |
| { | |
| .compatible = "st,m41t62", | |
| .data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_SQ_ALT) | |
| }, | |
| { | |
| .compatible = "st,m41t65", | |
| .data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_WD) | |
| }, | |
| { | |
| .compatible = "st,m41t80", | |
| .data = (void *)(M41T80_FEATURE_SQ) | |
| }, | |
| { | |
| .compatible = "st,m41t81", | |
| .data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_SQ) | |
| }, | |
| { | |
| .compatible = "st,m41t81s", | |
| .data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ) | |
| }, | |
| { | |
| .compatible = "st,m41t82", | |
| .data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ) | |
| }, | |
| { | |
| .compatible = "st,m41t83", | |
| .data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ) | |
| }, | |
| { | |
| .compatible = "st,m41t84", | |
| .data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ) | |
| }, | |
| { | |
| .compatible = "st,m41t85", | |
| .data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ) | |
| }, | |
| { | |
| .compatible = "st,m41t87", | |
| .data = (void *)(M41T80_FEATURE_HT | M41T80_FEATURE_BL | M41T80_FEATURE_SQ) | |
| }, | |
| { | |
| .compatible = "microcrystal,rv4162", | |
| .data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT) | |
| }, | |
| /* DT compatibility only, do not use compatibles below: */ | |
| { | |
| .compatible = "st,rv4162", | |
| .data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT) | |
| }, | |
| { | |
| .compatible = "rv4162", | |
| .data = (void *)(M41T80_FEATURE_SQ | M41T80_FEATURE_WD | M41T80_FEATURE_SQ_ALT) | |
| }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, m41t80_of_match); | |
| struct m41t80_data { | |
| unsigned long features; | |
| struct i2c_client *client; | |
| struct rtc_device *rtc; | |
| #ifdef CONFIG_COMMON_CLK | |
| struct clk_hw sqw; | |
| unsigned long freq; | |
| unsigned int sqwe; | |
| #endif | |
| }; | |
| static irqreturn_t m41t80_handle_irq(int irq, void *dev_id) | |
| { | |
| struct i2c_client *client = dev_id; | |
| struct m41t80_data *m41t80 = i2c_get_clientdata(client); | |
| unsigned long events = 0; | |
| int flags, flags_afe; | |
| rtc_lock(m41t80->rtc); | |
| flags_afe = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON); | |
| if (flags_afe < 0) { | |
| rtc_unlock(m41t80->rtc); | |
| return IRQ_NONE; | |
| } | |
| flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS); | |
| if (flags <= 0) { | |
| rtc_unlock(m41t80->rtc); | |
| return IRQ_NONE; | |
| } | |
| if (flags & M41T80_FLAGS_AF) { | |
| flags &= ~M41T80_FLAGS_AF; | |
| flags_afe &= ~M41T80_ALMON_AFE; | |
| events |= RTC_AF; | |
| } | |
| if (events) { | |
| rtc_update_irq(m41t80->rtc, 1, events); | |
| i2c_smbus_write_byte_data(client, M41T80_REG_FLAGS, flags); | |
| i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, | |
| flags_afe); | |
| } | |
| rtc_unlock(m41t80->rtc); | |
| return IRQ_HANDLED; | |
| } | |
| static int m41t80_rtc_read_time(struct device *dev, struct rtc_time *tm) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| unsigned char buf[8]; | |
| int err, flags; | |
| flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS); | |
| if (flags < 0) | |
| return flags; | |
| if (flags & M41T80_FLAGS_OF) { | |
| dev_err(&client->dev, "Oscillator failure, data is invalid.\n"); | |
| return -EINVAL; | |
| } | |
| err = i2c_smbus_read_i2c_block_data(client, M41T80_REG_SSEC, | |
| sizeof(buf), buf); | |
| if (err < 0) { | |
| dev_err(&client->dev, "Unable to read date\n"); | |
| return err; | |
| } | |
| tm->tm_sec = bcd2bin(buf[M41T80_REG_SEC] & 0x7f); | |
| tm->tm_min = bcd2bin(buf[M41T80_REG_MIN] & 0x7f); | |
| tm->tm_hour = bcd2bin(buf[M41T80_REG_HOUR] & 0x3f); | |
| tm->tm_mday = bcd2bin(buf[M41T80_REG_DAY] & 0x3f); | |
| tm->tm_wday = buf[M41T80_REG_WDAY] & 0x07; | |
| tm->tm_mon = bcd2bin(buf[M41T80_REG_MON] & 0x1f) - 1; | |
| /* assume 20YY not 19YY, and ignore the Century Bit */ | |
| tm->tm_year = bcd2bin(buf[M41T80_REG_YEAR]) + 100; | |
| return 0; | |
| } | |
| static int m41t80_rtc_set_time(struct device *dev, struct rtc_time *tm) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| struct m41t80_data *clientdata = i2c_get_clientdata(client); | |
| unsigned char buf[8]; | |
| int err, flags; | |
| buf[M41T80_REG_SSEC] = 0; | |
| buf[M41T80_REG_SEC] = bin2bcd(tm->tm_sec); | |
| buf[M41T80_REG_MIN] = bin2bcd(tm->tm_min); | |
| buf[M41T80_REG_HOUR] = bin2bcd(tm->tm_hour); | |
| buf[M41T80_REG_DAY] = bin2bcd(tm->tm_mday); | |
| buf[M41T80_REG_MON] = bin2bcd(tm->tm_mon + 1); | |
| buf[M41T80_REG_YEAR] = bin2bcd(tm->tm_year - 100); | |
| buf[M41T80_REG_WDAY] = tm->tm_wday; | |
| /* If the square wave output is controlled in the weekday register */ | |
| if (clientdata->features & M41T80_FEATURE_SQ_ALT) { | |
| int val; | |
| val = i2c_smbus_read_byte_data(client, M41T80_REG_WDAY); | |
| if (val < 0) | |
| return val; | |
| buf[M41T80_REG_WDAY] |= (val & 0xf0); | |
| } | |
| err = i2c_smbus_write_i2c_block_data(client, M41T80_REG_SSEC, | |
| sizeof(buf), buf); | |
| if (err < 0) { | |
| dev_err(&client->dev, "Unable to write to date registers\n"); | |
| return err; | |
| } | |
| /* Clear the OF bit of Flags Register */ | |
| flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS); | |
| if (flags < 0) | |
| return flags; | |
| err = i2c_smbus_write_byte_data(client, M41T80_REG_FLAGS, | |
| flags & ~M41T80_FLAGS_OF); | |
| if (err < 0) { | |
| dev_err(&client->dev, "Unable to write flags register\n"); | |
| return err; | |
| } | |
| return err; | |
| } | |
| static int m41t80_rtc_proc(struct device *dev, struct seq_file *seq) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| struct m41t80_data *clientdata = i2c_get_clientdata(client); | |
| int reg; | |
| if (clientdata->features & M41T80_FEATURE_BL) { | |
| reg = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS); | |
| if (reg < 0) | |
| return reg; | |
| seq_printf(seq, "battery\t\t: %s\n", | |
| (reg & M41T80_FLAGS_BATT_LOW) ? "exhausted" : "ok"); | |
| } | |
| return 0; | |
| } | |
| static int m41t80_alarm_irq_enable(struct device *dev, unsigned int enabled) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| int flags, retval; | |
| flags = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON); | |
| if (flags < 0) | |
| return flags; | |
| if (enabled) | |
| flags |= M41T80_ALMON_AFE; | |
| else | |
| flags &= ~M41T80_ALMON_AFE; | |
| retval = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, flags); | |
| if (retval < 0) { | |
| dev_err(dev, "Unable to enable alarm IRQ %d\n", retval); | |
| return retval; | |
| } | |
| return 0; | |
| } | |
| static int m41t80_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| u8 alarmvals[5]; | |
| int ret, err; | |
| alarmvals[0] = bin2bcd(alrm->time.tm_mon + 1); | |
| alarmvals[1] = bin2bcd(alrm->time.tm_mday); | |
| alarmvals[2] = bin2bcd(alrm->time.tm_hour); | |
| alarmvals[3] = bin2bcd(alrm->time.tm_min); | |
| alarmvals[4] = bin2bcd(alrm->time.tm_sec); | |
| /* Clear AF and AFE flags */ | |
| ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON); | |
| if (ret < 0) | |
| return ret; | |
| err = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, | |
| ret & ~(M41T80_ALMON_AFE)); | |
| if (err < 0) { | |
| dev_err(dev, "Unable to clear AFE bit\n"); | |
| return err; | |
| } | |
| /* Keep SQWE bit value */ | |
| alarmvals[0] |= (ret & M41T80_ALMON_SQWE); | |
| ret = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS); | |
| if (ret < 0) | |
| return ret; | |
| err = i2c_smbus_write_byte_data(client, M41T80_REG_FLAGS, | |
| ret & ~(M41T80_FLAGS_AF)); | |
| if (err < 0) { | |
| dev_err(dev, "Unable to clear AF bit\n"); | |
| return err; | |
| } | |
| /* Write the alarm */ | |
| err = i2c_smbus_write_i2c_block_data(client, M41T80_REG_ALARM_MON, | |
| 5, alarmvals); | |
| if (err) | |
| return err; | |
| /* Enable the alarm interrupt */ | |
| if (alrm->enabled) { | |
| alarmvals[0] |= M41T80_ALMON_AFE; | |
| err = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, | |
| alarmvals[0]); | |
| if (err) | |
| return err; | |
| } | |
| return 0; | |
| } | |
| static int m41t80_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| u8 alarmvals[5]; | |
| int flags, ret; | |
| ret = i2c_smbus_read_i2c_block_data(client, M41T80_REG_ALARM_MON, | |
| 5, alarmvals); | |
| if (ret != 5) | |
| return ret < 0 ? ret : -EIO; | |
| flags = i2c_smbus_read_byte_data(client, M41T80_REG_FLAGS); | |
| if (flags < 0) | |
| return flags; | |
| alrm->time.tm_sec = bcd2bin(alarmvals[4] & 0x7f); | |
| alrm->time.tm_min = bcd2bin(alarmvals[3] & 0x7f); | |
| alrm->time.tm_hour = bcd2bin(alarmvals[2] & 0x3f); | |
| alrm->time.tm_mday = bcd2bin(alarmvals[1] & 0x3f); | |
| alrm->time.tm_mon = bcd2bin(alarmvals[0] & 0x3f) - 1; | |
| alrm->enabled = !!(alarmvals[0] & M41T80_ALMON_AFE); | |
| alrm->pending = (flags & M41T80_FLAGS_AF) && alrm->enabled; | |
| return 0; | |
| } | |
| static const struct rtc_class_ops m41t80_rtc_ops = { | |
| .read_time = m41t80_rtc_read_time, | |
| .set_time = m41t80_rtc_set_time, | |
| .proc = m41t80_rtc_proc, | |
| .read_alarm = m41t80_read_alarm, | |
| .set_alarm = m41t80_set_alarm, | |
| .alarm_irq_enable = m41t80_alarm_irq_enable, | |
| }; | |
| #ifdef CONFIG_PM_SLEEP | |
| static int m41t80_suspend(struct device *dev) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| if (client->irq >= 0 && device_may_wakeup(dev)) | |
| enable_irq_wake(client->irq); | |
| return 0; | |
| } | |
| static int m41t80_resume(struct device *dev) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| if (client->irq >= 0 && device_may_wakeup(dev)) | |
| disable_irq_wake(client->irq); | |
| return 0; | |
| } | |
| #endif | |
| static SIMPLE_DEV_PM_OPS(m41t80_pm, m41t80_suspend, m41t80_resume); | |
| #ifdef CONFIG_COMMON_CLK | |
| #define sqw_to_m41t80_data(_hw) container_of(_hw, struct m41t80_data, sqw) | |
| static unsigned long m41t80_decode_freq(int setting) | |
| { | |
| return (setting == 0) ? 0 : (setting == 1) ? M41T80_SQW_MAX_FREQ : | |
| M41T80_SQW_MAX_FREQ >> setting; | |
| } | |
| static unsigned long m41t80_get_freq(struct m41t80_data *m41t80) | |
| { | |
| struct i2c_client *client = m41t80->client; | |
| int reg_sqw = (m41t80->features & M41T80_FEATURE_SQ_ALT) ? | |
| M41T80_REG_WDAY : M41T80_REG_SQW; | |
| int ret = i2c_smbus_read_byte_data(client, reg_sqw); | |
| if (ret < 0) | |
| return 0; | |
| return m41t80_decode_freq(ret >> 4); | |
| } | |
| static unsigned long m41t80_sqw_recalc_rate(struct clk_hw *hw, | |
| unsigned long parent_rate) | |
| { | |
| return sqw_to_m41t80_data(hw)->freq; | |
| } | |
| static long m41t80_sqw_round_rate(struct clk_hw *hw, unsigned long rate, | |
| unsigned long *prate) | |
| { | |
| if (rate >= M41T80_SQW_MAX_FREQ) | |
| return M41T80_SQW_MAX_FREQ; | |
| if (rate >= M41T80_SQW_MAX_FREQ / 4) | |
| return M41T80_SQW_MAX_FREQ / 4; | |
| if (!rate) | |
| return 0; | |
| return 1 << ilog2(rate); | |
| } | |
| static int m41t80_sqw_set_rate(struct clk_hw *hw, unsigned long rate, | |
| unsigned long parent_rate) | |
| { | |
| struct m41t80_data *m41t80 = sqw_to_m41t80_data(hw); | |
| struct i2c_client *client = m41t80->client; | |
| int reg_sqw = (m41t80->features & M41T80_FEATURE_SQ_ALT) ? | |
| M41T80_REG_WDAY : M41T80_REG_SQW; | |
| int reg, ret, val = 0; | |
| if (rate >= M41T80_SQW_MAX_FREQ) | |
| val = 1; | |
| else if (rate >= M41T80_SQW_MAX_FREQ / 4) | |
| val = 2; | |
| else if (rate) | |
| val = 15 - ilog2(rate); | |
| reg = i2c_smbus_read_byte_data(client, reg_sqw); | |
| if (reg < 0) | |
| return reg; | |
| reg = (reg & 0x0f) | (val << 4); | |
| ret = i2c_smbus_write_byte_data(client, reg_sqw, reg); | |
| if (!ret) | |
| m41t80->freq = m41t80_decode_freq(val); | |
| return ret; | |
| } | |
| static int m41t80_sqw_control(struct clk_hw *hw, bool enable) | |
| { | |
| struct m41t80_data *m41t80 = sqw_to_m41t80_data(hw); | |
| struct i2c_client *client = m41t80->client; | |
| int ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON); | |
| if (ret < 0) | |
| return ret; | |
| if (enable) | |
| ret |= M41T80_ALMON_SQWE; | |
| else | |
| ret &= ~M41T80_ALMON_SQWE; | |
| ret = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, ret); | |
| if (!ret) | |
| m41t80->sqwe = enable; | |
| return ret; | |
| } | |
| static int m41t80_sqw_prepare(struct clk_hw *hw) | |
| { | |
| return m41t80_sqw_control(hw, 1); | |
| } | |
| static void m41t80_sqw_unprepare(struct clk_hw *hw) | |
| { | |
| m41t80_sqw_control(hw, 0); | |
| } | |
| static int m41t80_sqw_is_prepared(struct clk_hw *hw) | |
| { | |
| return sqw_to_m41t80_data(hw)->sqwe; | |
| } | |
| static const struct clk_ops m41t80_sqw_ops = { | |
| .prepare = m41t80_sqw_prepare, | |
| .unprepare = m41t80_sqw_unprepare, | |
| .is_prepared = m41t80_sqw_is_prepared, | |
| .recalc_rate = m41t80_sqw_recalc_rate, | |
| .round_rate = m41t80_sqw_round_rate, | |
| .set_rate = m41t80_sqw_set_rate, | |
| }; | |
| static struct clk *m41t80_sqw_register_clk(struct m41t80_data *m41t80) | |
| { | |
| struct i2c_client *client = m41t80->client; | |
| struct device_node *node = client->dev.of_node; | |
| struct device_node *fixed_clock; | |
| struct clk *clk; | |
| struct clk_init_data init; | |
| int ret; | |
| fixed_clock = of_get_child_by_name(node, "clock"); | |
| if (fixed_clock) { | |
| /* | |
| * skip registering square wave clock when a fixed | |
| * clock has been registered. The fixed clock is | |
| * registered automatically when being referenced. | |
| */ | |
| of_node_put(fixed_clock); | |
| return NULL; | |
| } | |
| /* First disable the clock */ | |
| ret = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON); | |
| if (ret < 0) | |
| return ERR_PTR(ret); | |
| ret = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON, | |
| ret & ~(M41T80_ALMON_SQWE)); | |
| if (ret < 0) | |
| return ERR_PTR(ret); | |
| init.name = "m41t80-sqw"; | |
| init.ops = &m41t80_sqw_ops; | |
| init.flags = 0; | |
| init.parent_names = NULL; | |
| init.num_parents = 0; | |
| m41t80->sqw.init = &init; | |
| m41t80->freq = m41t80_get_freq(m41t80); | |
| /* optional override of the clockname */ | |
| of_property_read_string(node, "clock-output-names", &init.name); | |
| /* register the clock */ | |
| clk = clk_register(&client->dev, &m41t80->sqw); | |
| if (!IS_ERR(clk)) | |
| of_clk_add_provider(node, of_clk_src_simple_get, clk); | |
| return clk; | |
| } | |
| #endif | |
| #ifdef CONFIG_RTC_DRV_M41T80_WDT | |
| /* | |
| ***************************************************************************** | |
| * | |
| * Watchdog Driver | |
| * | |
| ***************************************************************************** | |
| */ | |
| static DEFINE_MUTEX(m41t80_rtc_mutex); | |
| static struct i2c_client *save_client; | |
| /* Default margin */ | |
| #define WD_TIMO 60 /* 1..31 seconds */ | |
| static int wdt_margin = WD_TIMO; | |
| module_param(wdt_margin, int, 0); | |
| MODULE_PARM_DESC(wdt_margin, "Watchdog timeout in seconds (default 60s)"); | |
| static unsigned long wdt_is_open; | |
| static int boot_flag; | |
| /** | |
| * wdt_ping - Reload counter one with the watchdog timeout. | |
| * We don't bother reloading the cascade counter. | |
| */ | |
| static void wdt_ping(void) | |
| { | |
| unsigned char i2c_data[2]; | |
| struct i2c_msg msgs1[1] = { | |
| { | |
| .addr = save_client->addr, | |
| .flags = 0, | |
| .len = 2, | |
| .buf = i2c_data, | |
| }, | |
| }; | |
| struct m41t80_data *clientdata = i2c_get_clientdata(save_client); | |
| i2c_data[0] = 0x09; /* watchdog register */ | |
| if (wdt_margin > 31) | |
| i2c_data[1] = (wdt_margin & 0xFC) | 0x83; /* resolution = 4s */ | |
| else | |
| /* | |
| * WDS = 1 (0x80), mulitplier = WD_TIMO, resolution = 1s (0x02) | |
| */ | |
| i2c_data[1] = wdt_margin << 2 | 0x82; | |
| /* | |
| * M41T65 has three bits for watchdog resolution. Don't set bit 7, as | |
| * that would be an invalid resolution. | |
| */ | |
| if (clientdata->features & M41T80_FEATURE_WD) | |
| i2c_data[1] &= ~M41T80_WATCHDOG_RB2; | |
| i2c_transfer(save_client->adapter, msgs1, 1); | |
| } | |
| /** | |
| * wdt_disable - disables watchdog. | |
| */ | |
| static void wdt_disable(void) | |
| { | |
| unsigned char i2c_data[2], i2c_buf[0x10]; | |
| struct i2c_msg msgs0[2] = { | |
| { | |
| .addr = save_client->addr, | |
| .flags = 0, | |
| .len = 1, | |
| .buf = i2c_data, | |
| }, | |
| { | |
| .addr = save_client->addr, | |
| .flags = I2C_M_RD, | |
| .len = 1, | |
| .buf = i2c_buf, | |
| }, | |
| }; | |
| struct i2c_msg msgs1[1] = { | |
| { | |
| .addr = save_client->addr, | |
| .flags = 0, | |
| .len = 2, | |
| .buf = i2c_data, | |
| }, | |
| }; | |
| i2c_data[0] = 0x09; | |
| i2c_transfer(save_client->adapter, msgs0, 2); | |
| i2c_data[0] = 0x09; | |
| i2c_data[1] = 0x00; | |
| i2c_transfer(save_client->adapter, msgs1, 1); | |
| } | |
| /** | |
| * wdt_write - write to watchdog. | |
| * @file: file handle to the watchdog | |
| * @buf: buffer to write (unused as data does not matter here | |
| * @count: count of bytes | |
| * @ppos: pointer to the position to write. No seeks allowed | |
| * | |
| * A write to a watchdog device is defined as a keepalive signal. Any | |
| * write of data will do, as we don't define content meaning. | |
| */ | |
| static ssize_t wdt_write(struct file *file, const char __user *buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| if (count) { | |
| wdt_ping(); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static ssize_t wdt_read(struct file *file, char __user *buf, | |
| size_t count, loff_t *ppos) | |
| { | |
| return 0; | |
| } | |
| /** | |
| * wdt_ioctl - ioctl handler to set watchdog. | |
| * @file: file handle to the device | |
| * @cmd: watchdog command | |
| * @arg: argument pointer | |
| * | |
| * The watchdog API defines a common set of functions for all watchdogs | |
| * according to their available features. We only actually usefully support | |
| * querying capabilities and current status. | |
| */ | |
| static int wdt_ioctl(struct file *file, unsigned int cmd, | |
| unsigned long arg) | |
| { | |
| int new_margin, rv; | |
| static struct watchdog_info ident = { | |
| .options = WDIOF_POWERUNDER | WDIOF_KEEPALIVEPING | | |
| WDIOF_SETTIMEOUT, | |
| .firmware_version = 1, | |
| .identity = "M41T80 WTD" | |
| }; | |
| switch (cmd) { | |
| case WDIOC_GETSUPPORT: | |
| return copy_to_user((struct watchdog_info __user *)arg, &ident, | |
| sizeof(ident)) ? -EFAULT : 0; | |
| case WDIOC_GETSTATUS: | |
| case WDIOC_GETBOOTSTATUS: | |
| return put_user(boot_flag, (int __user *)arg); | |
| case WDIOC_KEEPALIVE: | |
| wdt_ping(); | |
| return 0; | |
| case WDIOC_SETTIMEOUT: | |
| if (get_user(new_margin, (int __user *)arg)) | |
| return -EFAULT; | |
| /* Arbitrary, can't find the card's limits */ | |
| if (new_margin < 1 || new_margin > 124) | |
| return -EINVAL; | |
| wdt_margin = new_margin; | |
| wdt_ping(); | |
| fallthrough; | |
| case WDIOC_GETTIMEOUT: | |
| return put_user(wdt_margin, (int __user *)arg); | |
| case WDIOC_SETOPTIONS: | |
| if (copy_from_user(&rv, (int __user *)arg, sizeof(int))) | |
| return -EFAULT; | |
| if (rv & WDIOS_DISABLECARD) { | |
| pr_info("disable watchdog\n"); | |
| wdt_disable(); | |
| } | |
| if (rv & WDIOS_ENABLECARD) { | |
| pr_info("enable watchdog\n"); | |
| wdt_ping(); | |
| } | |
| return -EINVAL; | |
| } | |
| return -ENOTTY; | |
| } | |
| static long wdt_unlocked_ioctl(struct file *file, unsigned int cmd, | |
| unsigned long arg) | |
| { | |
| int ret; | |
| mutex_lock(&m41t80_rtc_mutex); | |
| ret = wdt_ioctl(file, cmd, arg); | |
| mutex_unlock(&m41t80_rtc_mutex); | |
| return ret; | |
| } | |
| /** | |
| * wdt_open - open a watchdog. | |
| * @inode: inode of device | |
| * @file: file handle to device | |
| * | |
| */ | |
| static int wdt_open(struct inode *inode, struct file *file) | |
| { | |
| if (iminor(inode) == WATCHDOG_MINOR) { | |
| mutex_lock(&m41t80_rtc_mutex); | |
| if (test_and_set_bit(0, &wdt_is_open)) { | |
| mutex_unlock(&m41t80_rtc_mutex); | |
| return -EBUSY; | |
| } | |
| /* | |
| * Activate | |
| */ | |
| wdt_is_open = 1; | |
| mutex_unlock(&m41t80_rtc_mutex); | |
| return stream_open(inode, file); | |
| } | |
| return -ENODEV; | |
| } | |
| /** | |
| * wdt_release - release a watchdog. | |
| * @inode: inode to board | |
| * @file: file handle to board | |
| * | |
| */ | |
| static int wdt_release(struct inode *inode, struct file *file) | |
| { | |
| if (iminor(inode) == WATCHDOG_MINOR) | |
| clear_bit(0, &wdt_is_open); | |
| return 0; | |
| } | |
| /** | |
| * wdt_notify_sys - notify to watchdog. | |
| * @this: our notifier block | |
| * @code: the event being reported | |
| * @unused: unused | |
| * | |
| * Our notifier is called on system shutdowns. We want to turn the card | |
| * off at reboot otherwise the machine will reboot again during memory | |
| * test or worse yet during the following fsck. This would suck, in fact | |
| * trust me - if it happens it does suck. | |
| */ | |
| static int wdt_notify_sys(struct notifier_block *this, unsigned long code, | |
| void *unused) | |
| { | |
| if (code == SYS_DOWN || code == SYS_HALT) | |
| /* Disable Watchdog */ | |
| wdt_disable(); | |
| return NOTIFY_DONE; | |
| } | |
| static const struct file_operations wdt_fops = { | |
| .owner = THIS_MODULE, | |
| .read = wdt_read, | |
| .unlocked_ioctl = wdt_unlocked_ioctl, | |
| .compat_ioctl = compat_ptr_ioctl, | |
| .write = wdt_write, | |
| .open = wdt_open, | |
| .release = wdt_release, | |
| .llseek = no_llseek, | |
| }; | |
| static struct miscdevice wdt_dev = { | |
| .minor = WATCHDOG_MINOR, | |
| .name = "watchdog", | |
| .fops = &wdt_fops, | |
| }; | |
| /* | |
| * The WDT card needs to learn about soft shutdowns in order to | |
| * turn the timebomb registers off. | |
| */ | |
| static struct notifier_block wdt_notifier = { | |
| .notifier_call = wdt_notify_sys, | |
| }; | |
| #endif /* CONFIG_RTC_DRV_M41T80_WDT */ | |
| /* | |
| ***************************************************************************** | |
| * | |
| * Driver Interface | |
| * | |
| ***************************************************************************** | |
| */ | |
| static int m41t80_probe(struct i2c_client *client) | |
| { | |
| struct i2c_adapter *adapter = client->adapter; | |
| int rc = 0; | |
| struct rtc_time tm; | |
| struct m41t80_data *m41t80_data = NULL; | |
| bool wakeup_source = false; | |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK | | |
| I2C_FUNC_SMBUS_BYTE_DATA)) { | |
| dev_err(&adapter->dev, "doesn't support I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_I2C_BLOCK\n"); | |
| return -ENODEV; | |
| } | |
| m41t80_data = devm_kzalloc(&client->dev, sizeof(*m41t80_data), | |
| GFP_KERNEL); | |
| if (!m41t80_data) | |
| return -ENOMEM; | |
| m41t80_data->client = client; | |
| if (client->dev.of_node) { | |
| m41t80_data->features = (unsigned long) | |
| of_device_get_match_data(&client->dev); | |
| } else { | |
| const struct i2c_device_id *id = i2c_match_id(m41t80_id, client); | |
| m41t80_data->features = id->driver_data; | |
| } | |
| i2c_set_clientdata(client, m41t80_data); | |
| m41t80_data->rtc = devm_rtc_allocate_device(&client->dev); | |
| if (IS_ERR(m41t80_data->rtc)) | |
| return PTR_ERR(m41t80_data->rtc); | |
| #ifdef CONFIG_OF | |
| wakeup_source = of_property_read_bool(client->dev.of_node, | |
| "wakeup-source"); | |
| #endif | |
| if (client->irq > 0) { | |
| unsigned long irqflags = IRQF_TRIGGER_LOW; | |
| if (dev_fwnode(&client->dev)) | |
| irqflags = 0; | |
| rc = devm_request_threaded_irq(&client->dev, client->irq, | |
| NULL, m41t80_handle_irq, | |
| irqflags | IRQF_ONESHOT, | |
| "m41t80", client); | |
| if (rc) { | |
| dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n"); | |
| client->irq = 0; | |
| wakeup_source = false; | |
| } | |
| } | |
| if (client->irq > 0 || wakeup_source) | |
| device_init_wakeup(&client->dev, true); | |
| else | |
| clear_bit(RTC_FEATURE_ALARM, m41t80_data->rtc->features); | |
| m41t80_data->rtc->ops = &m41t80_rtc_ops; | |
| m41t80_data->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000; | |
| m41t80_data->rtc->range_max = RTC_TIMESTAMP_END_2099; | |
| if (client->irq <= 0) | |
| clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, m41t80_data->rtc->features); | |
| /* Make sure HT (Halt Update) bit is cleared */ | |
| rc = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_HOUR); | |
| if (rc >= 0 && rc & M41T80_ALHOUR_HT) { | |
| if (m41t80_data->features & M41T80_FEATURE_HT) { | |
| m41t80_rtc_read_time(&client->dev, &tm); | |
| dev_info(&client->dev, "HT bit was set!\n"); | |
| dev_info(&client->dev, "Power Down at %ptR\n", &tm); | |
| } | |
| rc = i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_HOUR, | |
| rc & ~M41T80_ALHOUR_HT); | |
| } | |
| if (rc < 0) { | |
| dev_err(&client->dev, "Can't clear HT bit\n"); | |
| return rc; | |
| } | |
| /* Make sure ST (stop) bit is cleared */ | |
| rc = i2c_smbus_read_byte_data(client, M41T80_REG_SEC); | |
| if (rc >= 0 && rc & M41T80_SEC_ST) | |
| rc = i2c_smbus_write_byte_data(client, M41T80_REG_SEC, | |
| rc & ~M41T80_SEC_ST); | |
| if (rc < 0) { | |
| dev_err(&client->dev, "Can't clear ST bit\n"); | |
| return rc; | |
| } | |
| #ifdef CONFIG_RTC_DRV_M41T80_WDT | |
| if (m41t80_data->features & M41T80_FEATURE_HT) { | |
| save_client = client; | |
| rc = misc_register(&wdt_dev); | |
| if (rc) | |
| return rc; | |
| rc = register_reboot_notifier(&wdt_notifier); | |
| if (rc) { | |
| misc_deregister(&wdt_dev); | |
| return rc; | |
| } | |
| } | |
| #endif | |
| #ifdef CONFIG_COMMON_CLK | |
| if (m41t80_data->features & M41T80_FEATURE_SQ) | |
| m41t80_sqw_register_clk(m41t80_data); | |
| #endif | |
| rc = devm_rtc_register_device(m41t80_data->rtc); | |
| if (rc) | |
| return rc; | |
| return 0; | |
| } | |
| static void m41t80_remove(struct i2c_client *client) | |
| { | |
| #ifdef CONFIG_RTC_DRV_M41T80_WDT | |
| struct m41t80_data *clientdata = i2c_get_clientdata(client); | |
| if (clientdata->features & M41T80_FEATURE_HT) { | |
| misc_deregister(&wdt_dev); | |
| unregister_reboot_notifier(&wdt_notifier); | |
| } | |
| #endif | |
| } | |
| static struct i2c_driver m41t80_driver = { | |
| .driver = { | |
| .name = "rtc-m41t80", | |
| .of_match_table = of_match_ptr(m41t80_of_match), | |
| .pm = &m41t80_pm, | |
| }, | |
| .probe = m41t80_probe, | |
| .remove = m41t80_remove, | |
| .id_table = m41t80_id, | |
| }; | |
| module_i2c_driver(m41t80_driver); | |
| MODULE_AUTHOR("Alexander Bigga <ab@mycable.de>"); | |
| MODULE_DESCRIPTION("ST Microelectronics M41T80 series RTC I2C Client Driver"); | |
| MODULE_LICENSE("GPL"); |