| /* SPDX-License-Identifier: GPL-2.0-or-later */ | 
 | /* | 
 |  * drivers/net/bond/bond_options.h - bonding options | 
 |  * Copyright (c) 2013 Nikolay Aleksandrov <nikolay@redhat.com> | 
 |  */ | 
 |  | 
 | #ifndef _NET_BOND_OPTIONS_H | 
 | #define _NET_BOND_OPTIONS_H | 
 |  | 
 | #include <linux/bits.h> | 
 | #include <linux/limits.h> | 
 | #include <linux/types.h> | 
 | #include <linux/string.h> | 
 |  | 
 | struct netlink_ext_ack; | 
 | struct nlattr; | 
 |  | 
 | #define BOND_OPT_MAX_NAMELEN 32 | 
 | #define BOND_OPT_VALID(opt) ((opt) < BOND_OPT_LAST) | 
 | #define BOND_MODE_ALL_EX(x) (~(x)) | 
 |  | 
 | /* Option flags: | 
 |  * BOND_OPTFLAG_NOSLAVES - check if the bond device is empty before setting | 
 |  * BOND_OPTFLAG_IFDOWN - check if the bond device is down before setting | 
 |  * BOND_OPTFLAG_RAWVAL - the option parses the value itself | 
 |  */ | 
 | enum { | 
 | 	BOND_OPTFLAG_NOSLAVES	= BIT(0), | 
 | 	BOND_OPTFLAG_IFDOWN	= BIT(1), | 
 | 	BOND_OPTFLAG_RAWVAL	= BIT(2) | 
 | }; | 
 |  | 
 | /* Value type flags: | 
 |  * BOND_VALFLAG_DEFAULT - mark the value as default | 
 |  * BOND_VALFLAG_(MIN|MAX) - mark the value as min/max | 
 |  */ | 
 | enum { | 
 | 	BOND_VALFLAG_DEFAULT	= BIT(0), | 
 | 	BOND_VALFLAG_MIN	= BIT(1), | 
 | 	BOND_VALFLAG_MAX	= BIT(2) | 
 | }; | 
 |  | 
 | /* Option IDs, their bit positions correspond to their IDs */ | 
 | enum { | 
 | 	BOND_OPT_MODE, | 
 | 	BOND_OPT_PACKETS_PER_SLAVE, | 
 | 	BOND_OPT_XMIT_HASH, | 
 | 	BOND_OPT_ARP_VALIDATE, | 
 | 	BOND_OPT_ARP_ALL_TARGETS, | 
 | 	BOND_OPT_FAIL_OVER_MAC, | 
 | 	BOND_OPT_ARP_INTERVAL, | 
 | 	BOND_OPT_ARP_TARGETS, | 
 | 	BOND_OPT_DOWNDELAY, | 
 | 	BOND_OPT_UPDELAY, | 
 | 	BOND_OPT_LACP_RATE, | 
 | 	BOND_OPT_MINLINKS, | 
 | 	BOND_OPT_AD_SELECT, | 
 | 	BOND_OPT_NUM_PEER_NOTIF, | 
 | 	BOND_OPT_MIIMON, | 
 | 	BOND_OPT_PRIMARY, | 
 | 	BOND_OPT_PRIMARY_RESELECT, | 
 | 	BOND_OPT_USE_CARRIER, | 
 | 	BOND_OPT_ACTIVE_SLAVE, | 
 | 	BOND_OPT_QUEUE_ID, | 
 | 	BOND_OPT_ALL_SLAVES_ACTIVE, | 
 | 	BOND_OPT_RESEND_IGMP, | 
 | 	BOND_OPT_LP_INTERVAL, | 
 | 	BOND_OPT_SLAVES, | 
 | 	BOND_OPT_TLB_DYNAMIC_LB, | 
 | 	BOND_OPT_AD_ACTOR_SYS_PRIO, | 
 | 	BOND_OPT_AD_ACTOR_SYSTEM, | 
 | 	BOND_OPT_AD_USER_PORT_KEY, | 
 | 	BOND_OPT_NUM_PEER_NOTIF_ALIAS, | 
 | 	BOND_OPT_PEER_NOTIF_DELAY, | 
 | 	BOND_OPT_LACP_ACTIVE, | 
 | 	BOND_OPT_MISSED_MAX, | 
 | 	BOND_OPT_NS_TARGETS, | 
 | 	BOND_OPT_PRIO, | 
 | 	BOND_OPT_LAST | 
 | }; | 
 |  | 
 | /* This structure is used for storing option values and for passing option | 
 |  * values when changing an option. The logic when used as an arg is as follows: | 
 |  * - if value != ULLONG_MAX -> parse value | 
 |  * - if string != NULL -> parse string | 
 |  * - if the opt is RAW data and length less than maxlen, | 
 |  *   copy the data to extra storage | 
 |  */ | 
 |  | 
 | #define BOND_OPT_EXTRA_MAXLEN 16 | 
 | struct bond_opt_value { | 
 | 	char *string; | 
 | 	u64 value; | 
 | 	u32 flags; | 
 | 	union { | 
 | 		char extra[BOND_OPT_EXTRA_MAXLEN]; | 
 | 		struct net_device *slave_dev; | 
 | 	}; | 
 | }; | 
 |  | 
 | struct bonding; | 
 |  | 
 | struct bond_option { | 
 | 	int id; | 
 | 	const char *name; | 
 | 	const char *desc; | 
 | 	u32 flags; | 
 |  | 
 | 	/* unsuppmodes is used to denote modes in which the option isn't | 
 | 	 * supported. | 
 | 	 */ | 
 | 	unsigned long unsuppmodes; | 
 | 	/* supported values which this option can have, can be a subset of | 
 | 	 * BOND_OPTVAL_RANGE's value range | 
 | 	 */ | 
 | 	const struct bond_opt_value *values; | 
 |  | 
 | 	int (*set)(struct bonding *bond, const struct bond_opt_value *val); | 
 | }; | 
 |  | 
 | int __bond_opt_set(struct bonding *bond, unsigned int option, | 
 | 		   struct bond_opt_value *val, | 
 | 		   struct nlattr *bad_attr, struct netlink_ext_ack *extack); | 
 | int __bond_opt_set_notify(struct bonding *bond, unsigned int option, | 
 | 			  struct bond_opt_value *val); | 
 | int bond_opt_tryset_rtnl(struct bonding *bond, unsigned int option, char *buf); | 
 |  | 
 | const struct bond_opt_value *bond_opt_parse(const struct bond_option *opt, | 
 | 					    struct bond_opt_value *val); | 
 | const struct bond_option *bond_opt_get(unsigned int option); | 
 | const struct bond_option *bond_opt_get_by_name(const char *name); | 
 | const struct bond_opt_value *bond_opt_get_val(unsigned int option, u64 val); | 
 |  | 
 | /* This helper is used to initialize a bond_opt_value structure for parameter | 
 |  * passing. There should be either a valid string or value, but not both. | 
 |  * When value is ULLONG_MAX then string will be used. | 
 |  */ | 
 | static inline void __bond_opt_init(struct bond_opt_value *optval, | 
 | 				   char *string, u64 value, | 
 | 				   void *extra, size_t extra_len) | 
 | { | 
 | 	memset(optval, 0, sizeof(*optval)); | 
 | 	optval->value = ULLONG_MAX; | 
 | 	if (value != ULLONG_MAX) | 
 | 		optval->value = value; | 
 | 	else if (string) | 
 | 		optval->string = string; | 
 |  | 
 | 	if (extra && extra_len <= BOND_OPT_EXTRA_MAXLEN) | 
 | 		memcpy(optval->extra, extra, extra_len); | 
 | } | 
 | #define bond_opt_initval(optval, value) __bond_opt_init(optval, NULL, value, NULL, 0) | 
 | #define bond_opt_initstr(optval, str) __bond_opt_init(optval, str, ULLONG_MAX, NULL, 0) | 
 | #define bond_opt_initextra(optval, extra, extra_len) \ | 
 | 	__bond_opt_init(optval, NULL, ULLONG_MAX, extra, extra_len) | 
 | #define bond_opt_slave_initval(optval, slave_dev, value) \ | 
 | 	__bond_opt_init(optval, NULL, value, slave_dev, sizeof(struct net_device *)) | 
 |  | 
 | void bond_option_arp_ip_targets_clear(struct bonding *bond); | 
 | #if IS_ENABLED(CONFIG_IPV6) | 
 | void bond_option_ns_ip6_targets_clear(struct bonding *bond); | 
 | #endif | 
 | void bond_slave_ns_maddrs_add(struct bonding *bond, struct slave *slave); | 
 | void bond_slave_ns_maddrs_del(struct bonding *bond, struct slave *slave); | 
 |  | 
 | #endif /* _NET_BOND_OPTIONS_H */ |