| /* SPDX-License-Identifier: GPL-2.0-or-later */ | |
| /* | |
| * phy.h -- generic phy header file | |
| * | |
| * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com | |
| * | |
| * Author: Kishon Vijay Abraham I <kishon@ti.com> | |
| */ | |
| #ifndef __DRIVERS_PHY_H | |
| #define __DRIVERS_PHY_H | |
| #include <linux/err.h> | |
| #include <linux/of.h> | |
| #include <linux/device.h> | |
| #include <linux/pm_runtime.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <linux/phy/phy-dp.h> | |
| #include <linux/phy/phy-mipi-dphy.h> | |
| struct phy; | |
| enum phy_mode { | |
| PHY_MODE_INVALID, | |
| PHY_MODE_USB_HOST, | |
| PHY_MODE_USB_HOST_LS, | |
| PHY_MODE_USB_HOST_FS, | |
| PHY_MODE_USB_HOST_HS, | |
| PHY_MODE_USB_HOST_SS, | |
| PHY_MODE_USB_DEVICE, | |
| PHY_MODE_USB_DEVICE_LS, | |
| PHY_MODE_USB_DEVICE_FS, | |
| PHY_MODE_USB_DEVICE_HS, | |
| PHY_MODE_USB_DEVICE_SS, | |
| PHY_MODE_USB_OTG, | |
| PHY_MODE_UFS_HS_A, | |
| PHY_MODE_UFS_HS_B, | |
| PHY_MODE_PCIE, | |
| PHY_MODE_ETHERNET, | |
| PHY_MODE_MIPI_DPHY, | |
| PHY_MODE_SATA, | |
| PHY_MODE_LVDS, | |
| PHY_MODE_DP | |
| }; | |
| /** | |
| * union phy_configure_opts - Opaque generic phy configuration | |
| * | |
| * @mipi_dphy: Configuration set applicable for phys supporting | |
| * the MIPI_DPHY phy mode. | |
| * @dp: Configuration set applicable for phys supporting | |
| * the DisplayPort protocol. | |
| */ | |
| union phy_configure_opts { | |
| struct phy_configure_opts_mipi_dphy mipi_dphy; | |
| struct phy_configure_opts_dp dp; | |
| }; | |
| /** | |
| * struct phy_ops - set of function pointers for performing phy operations | |
| * @init: operation to be performed for initializing phy | |
| * @exit: operation to be performed while exiting | |
| * @power_on: powering on the phy | |
| * @power_off: powering off the phy | |
| * @set_mode: set the mode of the phy | |
| * @reset: resetting the phy | |
| * @calibrate: calibrate the phy | |
| * @release: ops to be performed while the consumer relinquishes the PHY | |
| * @owner: the module owner containing the ops | |
| */ | |
| struct phy_ops { | |
| int (*init)(struct phy *phy); | |
| int (*exit)(struct phy *phy); | |
| int (*power_on)(struct phy *phy); | |
| int (*power_off)(struct phy *phy); | |
| int (*set_mode)(struct phy *phy, enum phy_mode mode, int submode); | |
| /** | |
| * @configure: | |
| * | |
| * Optional. | |
| * | |
| * Used to change the PHY parameters. phy_init() must have | |
| * been called on the phy. | |
| * | |
| * Returns: 0 if successful, an negative error code otherwise | |
| */ | |
| int (*configure)(struct phy *phy, union phy_configure_opts *opts); | |
| /** | |
| * @validate: | |
| * | |
| * Optional. | |
| * | |
| * Used to check that the current set of parameters can be | |
| * handled by the phy. Implementations are free to tune the | |
| * parameters passed as arguments if needed by some | |
| * implementation detail or constraints. It must not change | |
| * any actual configuration of the PHY, so calling it as many | |
| * times as deemed fit by the consumer must have no side | |
| * effect. | |
| * | |
| * Returns: 0 if the configuration can be applied, an negative | |
| * error code otherwise | |
| */ | |
| int (*validate)(struct phy *phy, enum phy_mode mode, int submode, | |
| union phy_configure_opts *opts); | |
| int (*reset)(struct phy *phy); | |
| int (*calibrate)(struct phy *phy); | |
| void (*release)(struct phy *phy); | |
| struct module *owner; | |
| }; | |
| /** | |
| * struct phy_attrs - represents phy attributes | |
| * @bus_width: Data path width implemented by PHY | |
| * @max_link_rate: Maximum link rate supported by PHY (in Mbps) | |
| * @mode: PHY mode | |
| */ | |
| struct phy_attrs { | |
| u32 bus_width; | |
| u32 max_link_rate; | |
| enum phy_mode mode; | |
| }; | |
| /** | |
| * struct phy - represents the phy device | |
| * @dev: phy device | |
| * @id: id of the phy device | |
| * @ops: function pointers for performing phy operations | |
| * @mutex: mutex to protect phy_ops | |
| * @init_count: used to protect when the PHY is used by multiple consumers | |
| * @power_count: used to protect when the PHY is used by multiple consumers | |
| * @attrs: used to specify PHY specific attributes | |
| * @pwr: power regulator associated with the phy | |
| */ | |
| struct phy { | |
| struct device dev; | |
| int id; | |
| const struct phy_ops *ops; | |
| struct mutex mutex; | |
| int init_count; | |
| int power_count; | |
| struct phy_attrs attrs; | |
| struct regulator *pwr; | |
| }; | |
| /** | |
| * struct phy_provider - represents the phy provider | |
| * @dev: phy provider device | |
| * @children: can be used to override the default (dev->of_node) child node | |
| * @owner: the module owner having of_xlate | |
| * @list: to maintain a linked list of PHY providers | |
| * @of_xlate: function pointer to obtain phy instance from phy pointer | |
| */ | |
| struct phy_provider { | |
| struct device *dev; | |
| struct device_node *children; | |
| struct module *owner; | |
| struct list_head list; | |
| struct phy * (*of_xlate)(struct device *dev, | |
| struct of_phandle_args *args); | |
| }; | |
| /** | |
| * struct phy_lookup - PHY association in list of phys managed by the phy driver | |
| * @node: list node | |
| * @dev_id: the device of the association | |
| * @con_id: connection ID string on device | |
| * @phy: the phy of the association | |
| */ | |
| struct phy_lookup { | |
| struct list_head node; | |
| const char *dev_id; | |
| const char *con_id; | |
| struct phy *phy; | |
| }; | |
| #define to_phy(a) (container_of((a), struct phy, dev)) | |
| #define of_phy_provider_register(dev, xlate) \ | |
| __of_phy_provider_register((dev), NULL, THIS_MODULE, (xlate)) | |
| #define devm_of_phy_provider_register(dev, xlate) \ | |
| __devm_of_phy_provider_register((dev), NULL, THIS_MODULE, (xlate)) | |
| #define of_phy_provider_register_full(dev, children, xlate) \ | |
| __of_phy_provider_register(dev, children, THIS_MODULE, xlate) | |
| #define devm_of_phy_provider_register_full(dev, children, xlate) \ | |
| __devm_of_phy_provider_register(dev, children, THIS_MODULE, xlate) | |
| static inline void phy_set_drvdata(struct phy *phy, void *data) | |
| { | |
| dev_set_drvdata(&phy->dev, data); | |
| } | |
| static inline void *phy_get_drvdata(struct phy *phy) | |
| { | |
| return dev_get_drvdata(&phy->dev); | |
| } | |
| #if IS_ENABLED(CONFIG_GENERIC_PHY) | |
| int phy_pm_runtime_get(struct phy *phy); | |
| int phy_pm_runtime_get_sync(struct phy *phy); | |
| int phy_pm_runtime_put(struct phy *phy); | |
| int phy_pm_runtime_put_sync(struct phy *phy); | |
| void phy_pm_runtime_allow(struct phy *phy); | |
| void phy_pm_runtime_forbid(struct phy *phy); | |
| int phy_init(struct phy *phy); | |
| int phy_exit(struct phy *phy); | |
| int phy_power_on(struct phy *phy); | |
| int phy_power_off(struct phy *phy); | |
| int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode); | |
| #define phy_set_mode(phy, mode) \ | |
| phy_set_mode_ext(phy, mode, 0) | |
| int phy_configure(struct phy *phy, union phy_configure_opts *opts); | |
| int phy_validate(struct phy *phy, enum phy_mode mode, int submode, | |
| union phy_configure_opts *opts); | |
| static inline enum phy_mode phy_get_mode(struct phy *phy) | |
| { | |
| return phy->attrs.mode; | |
| } | |
| int phy_reset(struct phy *phy); | |
| int phy_calibrate(struct phy *phy); | |
| static inline int phy_get_bus_width(struct phy *phy) | |
| { | |
| return phy->attrs.bus_width; | |
| } | |
| static inline void phy_set_bus_width(struct phy *phy, int bus_width) | |
| { | |
| phy->attrs.bus_width = bus_width; | |
| } | |
| struct phy *phy_get(struct device *dev, const char *string); | |
| struct phy *phy_optional_get(struct device *dev, const char *string); | |
| struct phy *devm_phy_get(struct device *dev, const char *string); | |
| struct phy *devm_phy_optional_get(struct device *dev, const char *string); | |
| struct phy *devm_of_phy_get(struct device *dev, struct device_node *np, | |
| const char *con_id); | |
| struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np, | |
| int index); | |
| void of_phy_put(struct phy *phy); | |
| void phy_put(struct device *dev, struct phy *phy); | |
| void devm_phy_put(struct device *dev, struct phy *phy); | |
| struct phy *of_phy_get(struct device_node *np, const char *con_id); | |
| struct phy *of_phy_simple_xlate(struct device *dev, | |
| struct of_phandle_args *args); | |
| struct phy *phy_create(struct device *dev, struct device_node *node, | |
| const struct phy_ops *ops); | |
| struct phy *devm_phy_create(struct device *dev, struct device_node *node, | |
| const struct phy_ops *ops); | |
| void phy_destroy(struct phy *phy); | |
| void devm_phy_destroy(struct device *dev, struct phy *phy); | |
| struct phy_provider *__of_phy_provider_register(struct device *dev, | |
| struct device_node *children, struct module *owner, | |
| struct phy * (*of_xlate)(struct device *dev, | |
| struct of_phandle_args *args)); | |
| struct phy_provider *__devm_of_phy_provider_register(struct device *dev, | |
| struct device_node *children, struct module *owner, | |
| struct phy * (*of_xlate)(struct device *dev, | |
| struct of_phandle_args *args)); | |
| void of_phy_provider_unregister(struct phy_provider *phy_provider); | |
| void devm_of_phy_provider_unregister(struct device *dev, | |
| struct phy_provider *phy_provider); | |
| int phy_create_lookup(struct phy *phy, const char *con_id, const char *dev_id); | |
| void phy_remove_lookup(struct phy *phy, const char *con_id, const char *dev_id); | |
| #else | |
| static inline int phy_pm_runtime_get(struct phy *phy) | |
| { | |
| if (!phy) | |
| return 0; | |
| return -ENOSYS; | |
| } | |
| static inline int phy_pm_runtime_get_sync(struct phy *phy) | |
| { | |
| if (!phy) | |
| return 0; | |
| return -ENOSYS; | |
| } | |
| static inline int phy_pm_runtime_put(struct phy *phy) | |
| { | |
| if (!phy) | |
| return 0; | |
| return -ENOSYS; | |
| } | |
| static inline int phy_pm_runtime_put_sync(struct phy *phy) | |
| { | |
| if (!phy) | |
| return 0; | |
| return -ENOSYS; | |
| } | |
| static inline void phy_pm_runtime_allow(struct phy *phy) | |
| { | |
| return; | |
| } | |
| static inline void phy_pm_runtime_forbid(struct phy *phy) | |
| { | |
| return; | |
| } | |
| static inline int phy_init(struct phy *phy) | |
| { | |
| if (!phy) | |
| return 0; | |
| return -ENOSYS; | |
| } | |
| static inline int phy_exit(struct phy *phy) | |
| { | |
| if (!phy) | |
| return 0; | |
| return -ENOSYS; | |
| } | |
| static inline int phy_power_on(struct phy *phy) | |
| { | |
| if (!phy) | |
| return 0; | |
| return -ENOSYS; | |
| } | |
| static inline int phy_power_off(struct phy *phy) | |
| { | |
| if (!phy) | |
| return 0; | |
| return -ENOSYS; | |
| } | |
| static inline int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, | |
| int submode) | |
| { | |
| if (!phy) | |
| return 0; | |
| return -ENOSYS; | |
| } | |
| #define phy_set_mode(phy, mode) \ | |
| phy_set_mode_ext(phy, mode, 0) | |
| static inline enum phy_mode phy_get_mode(struct phy *phy) | |
| { | |
| return PHY_MODE_INVALID; | |
| } | |
| static inline int phy_reset(struct phy *phy) | |
| { | |
| if (!phy) | |
| return 0; | |
| return -ENOSYS; | |
| } | |
| static inline int phy_calibrate(struct phy *phy) | |
| { | |
| if (!phy) | |
| return 0; | |
| return -ENOSYS; | |
| } | |
| static inline int phy_configure(struct phy *phy, | |
| union phy_configure_opts *opts) | |
| { | |
| if (!phy) | |
| return 0; | |
| return -ENOSYS; | |
| } | |
| static inline int phy_validate(struct phy *phy, enum phy_mode mode, int submode, | |
| union phy_configure_opts *opts) | |
| { | |
| if (!phy) | |
| return 0; | |
| return -ENOSYS; | |
| } | |
| static inline int phy_get_bus_width(struct phy *phy) | |
| { | |
| return -ENOSYS; | |
| } | |
| static inline void phy_set_bus_width(struct phy *phy, int bus_width) | |
| { | |
| return; | |
| } | |
| static inline struct phy *phy_get(struct device *dev, const char *string) | |
| { | |
| return ERR_PTR(-ENOSYS); | |
| } | |
| static inline struct phy *phy_optional_get(struct device *dev, | |
| const char *string) | |
| { | |
| return ERR_PTR(-ENOSYS); | |
| } | |
| static inline struct phy *devm_phy_get(struct device *dev, const char *string) | |
| { | |
| return ERR_PTR(-ENOSYS); | |
| } | |
| static inline struct phy *devm_phy_optional_get(struct device *dev, | |
| const char *string) | |
| { | |
| return NULL; | |
| } | |
| static inline struct phy *devm_of_phy_get(struct device *dev, | |
| struct device_node *np, | |
| const char *con_id) | |
| { | |
| return ERR_PTR(-ENOSYS); | |
| } | |
| static inline struct phy *devm_of_phy_get_by_index(struct device *dev, | |
| struct device_node *np, | |
| int index) | |
| { | |
| return ERR_PTR(-ENOSYS); | |
| } | |
| static inline void of_phy_put(struct phy *phy) | |
| { | |
| } | |
| static inline void phy_put(struct device *dev, struct phy *phy) | |
| { | |
| } | |
| static inline void devm_phy_put(struct device *dev, struct phy *phy) | |
| { | |
| } | |
| static inline struct phy *of_phy_get(struct device_node *np, const char *con_id) | |
| { | |
| return ERR_PTR(-ENOSYS); | |
| } | |
| static inline struct phy *of_phy_simple_xlate(struct device *dev, | |
| struct of_phandle_args *args) | |
| { | |
| return ERR_PTR(-ENOSYS); | |
| } | |
| static inline struct phy *phy_create(struct device *dev, | |
| struct device_node *node, | |
| const struct phy_ops *ops) | |
| { | |
| return ERR_PTR(-ENOSYS); | |
| } | |
| static inline struct phy *devm_phy_create(struct device *dev, | |
| struct device_node *node, | |
| const struct phy_ops *ops) | |
| { | |
| return ERR_PTR(-ENOSYS); | |
| } | |
| static inline void phy_destroy(struct phy *phy) | |
| { | |
| } | |
| static inline void devm_phy_destroy(struct device *dev, struct phy *phy) | |
| { | |
| } | |
| static inline struct phy_provider *__of_phy_provider_register( | |
| struct device *dev, struct device_node *children, struct module *owner, | |
| struct phy * (*of_xlate)(struct device *dev, | |
| struct of_phandle_args *args)) | |
| { | |
| return ERR_PTR(-ENOSYS); | |
| } | |
| static inline struct phy_provider *__devm_of_phy_provider_register(struct device | |
| *dev, struct device_node *children, struct module *owner, | |
| struct phy * (*of_xlate)(struct device *dev, | |
| struct of_phandle_args *args)) | |
| { | |
| return ERR_PTR(-ENOSYS); | |
| } | |
| static inline void of_phy_provider_unregister(struct phy_provider *phy_provider) | |
| { | |
| } | |
| static inline void devm_of_phy_provider_unregister(struct device *dev, | |
| struct phy_provider *phy_provider) | |
| { | |
| } | |
| static inline int | |
| phy_create_lookup(struct phy *phy, const char *con_id, const char *dev_id) | |
| { | |
| return 0; | |
| } | |
| static inline void phy_remove_lookup(struct phy *phy, const char *con_id, | |
| const char *dev_id) { } | |
| #endif | |
| #endif /* __DRIVERS_PHY_H */ |