| // SPDX-License-Identifier: GPL-2.0-or-later | 
 | /* | 
 |  *  acpi_bus.c - ACPI Bus Driver ($Revision: 80 $) | 
 |  * | 
 |  *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> | 
 |  */ | 
 |  | 
 | #define pr_fmt(fmt) "ACPI: " fmt | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/ioport.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/list.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/pm.h> | 
 | #include <linux/device.h> | 
 | #include <linux/proc_fs.h> | 
 | #include <linux/acpi.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/regulator/machine.h> | 
 | #include <linux/workqueue.h> | 
 | #include <linux/reboot.h> | 
 | #include <linux/delay.h> | 
 | #ifdef CONFIG_X86 | 
 | #include <asm/mpspec.h> | 
 | #include <linux/dmi.h> | 
 | #endif | 
 | #include <linux/acpi_iort.h> | 
 | #include <linux/acpi_viot.h> | 
 | #include <linux/pci.h> | 
 | #include <acpi/apei.h> | 
 | #include <linux/suspend.h> | 
 | #include <linux/prmt.h> | 
 |  | 
 | #include "internal.h" | 
 |  | 
 | struct acpi_device *acpi_root; | 
 | struct proc_dir_entry *acpi_root_dir; | 
 | EXPORT_SYMBOL(acpi_root_dir); | 
 |  | 
 | #ifdef CONFIG_X86 | 
 | #ifdef CONFIG_ACPI_CUSTOM_DSDT | 
 | static inline int set_copy_dsdt(const struct dmi_system_id *id) | 
 | { | 
 | 	return 0; | 
 | } | 
 | #else | 
 | static int set_copy_dsdt(const struct dmi_system_id *id) | 
 | { | 
 | 	pr_notice("%s detected - force copy of DSDT to local memory\n", id->ident); | 
 | 	acpi_gbl_copy_dsdt_locally = 1; | 
 | 	return 0; | 
 | } | 
 | #endif | 
 |  | 
 | static const struct dmi_system_id dsdt_dmi_table[] __initconst = { | 
 | 	/* | 
 | 	 * Invoke DSDT corruption work-around on all Toshiba Satellite. | 
 | 	 * https://bugzilla.kernel.org/show_bug.cgi?id=14679 | 
 | 	 */ | 
 | 	{ | 
 | 	 .callback = set_copy_dsdt, | 
 | 	 .ident = "TOSHIBA Satellite", | 
 | 	 .matches = { | 
 | 		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), | 
 | 		DMI_MATCH(DMI_PRODUCT_NAME, "Satellite"), | 
 | 		}, | 
 | 	}, | 
 | 	{} | 
 | }; | 
 | #endif | 
 |  | 
 | /* -------------------------------------------------------------------------- | 
 |                                 Device Management | 
 |    -------------------------------------------------------------------------- */ | 
 |  | 
 | acpi_status acpi_bus_get_status_handle(acpi_handle handle, | 
 | 				       unsigned long long *sta) | 
 | { | 
 | 	acpi_status status; | 
 |  | 
 | 	status = acpi_evaluate_integer(handle, "_STA", NULL, sta); | 
 | 	if (ACPI_SUCCESS(status)) | 
 | 		return AE_OK; | 
 |  | 
 | 	if (status == AE_NOT_FOUND) { | 
 | 		*sta = ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED | | 
 | 		       ACPI_STA_DEVICE_UI      | ACPI_STA_DEVICE_FUNCTIONING; | 
 | 		return AE_OK; | 
 | 	} | 
 | 	return status; | 
 | } | 
 | EXPORT_SYMBOL_GPL(acpi_bus_get_status_handle); | 
 |  | 
 | int acpi_bus_get_status(struct acpi_device *device) | 
 | { | 
 | 	acpi_status status; | 
 | 	unsigned long long sta; | 
 |  | 
 | 	if (acpi_device_override_status(device, &sta)) { | 
 | 		acpi_set_device_status(device, sta); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	/* Battery devices must have their deps met before calling _STA */ | 
 | 	if (acpi_device_is_battery(device) && device->dep_unmet) { | 
 | 		acpi_set_device_status(device, 0); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	status = acpi_bus_get_status_handle(device->handle, &sta); | 
 | 	if (ACPI_FAILURE(status)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	acpi_set_device_status(device, sta); | 
 |  | 
 | 	if (device->status.functional && !device->status.present) { | 
 | 		pr_debug("Device [%s] status [%08x]: functional but not present\n", | 
 | 			 device->pnp.bus_id, (u32)sta); | 
 | 	} | 
 |  | 
 | 	pr_debug("Device [%s] status [%08x]\n", device->pnp.bus_id, (u32)sta); | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(acpi_bus_get_status); | 
 |  | 
 | void acpi_bus_private_data_handler(acpi_handle handle, | 
 | 				   void *context) | 
 | { | 
 | 	return; | 
 | } | 
 | EXPORT_SYMBOL(acpi_bus_private_data_handler); | 
 |  | 
 | int acpi_bus_attach_private_data(acpi_handle handle, void *data) | 
 | { | 
 | 	acpi_status status; | 
 |  | 
 | 	status = acpi_attach_data(handle, | 
 | 			acpi_bus_private_data_handler, data); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		acpi_handle_debug(handle, "Error attaching device data\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL_GPL(acpi_bus_attach_private_data); | 
 |  | 
 | int acpi_bus_get_private_data(acpi_handle handle, void **data) | 
 | { | 
 | 	acpi_status status; | 
 |  | 
 | 	if (!data) | 
 | 		return -EINVAL; | 
 |  | 
 | 	status = acpi_get_data(handle, acpi_bus_private_data_handler, data); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		acpi_handle_debug(handle, "No context for object\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL_GPL(acpi_bus_get_private_data); | 
 |  | 
 | void acpi_bus_detach_private_data(acpi_handle handle) | 
 | { | 
 | 	acpi_detach_data(handle, acpi_bus_private_data_handler); | 
 | } | 
 | EXPORT_SYMBOL_GPL(acpi_bus_detach_private_data); | 
 |  | 
 | static void acpi_print_osc_error(acpi_handle handle, | 
 | 				 struct acpi_osc_context *context, char *error) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	acpi_handle_debug(handle, "(%s): %s\n", context->uuid_str, error); | 
 |  | 
 | 	pr_debug("_OSC request data:"); | 
 | 	for (i = 0; i < context->cap.length; i += sizeof(u32)) | 
 | 		pr_debug(" %x", *((u32 *)(context->cap.pointer + i))); | 
 |  | 
 | 	pr_debug("\n"); | 
 | } | 
 |  | 
 | acpi_status acpi_run_osc(acpi_handle handle, struct acpi_osc_context *context) | 
 | { | 
 | 	acpi_status status; | 
 | 	struct acpi_object_list input; | 
 | 	union acpi_object in_params[4]; | 
 | 	union acpi_object *out_obj; | 
 | 	guid_t guid; | 
 | 	u32 errors; | 
 | 	struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL}; | 
 |  | 
 | 	if (!context) | 
 | 		return AE_ERROR; | 
 | 	if (guid_parse(context->uuid_str, &guid)) | 
 | 		return AE_ERROR; | 
 | 	context->ret.length = ACPI_ALLOCATE_BUFFER; | 
 | 	context->ret.pointer = NULL; | 
 |  | 
 | 	/* Setting up input parameters */ | 
 | 	input.count = 4; | 
 | 	input.pointer = in_params; | 
 | 	in_params[0].type 		= ACPI_TYPE_BUFFER; | 
 | 	in_params[0].buffer.length 	= 16; | 
 | 	in_params[0].buffer.pointer	= (u8 *)&guid; | 
 | 	in_params[1].type 		= ACPI_TYPE_INTEGER; | 
 | 	in_params[1].integer.value 	= context->rev; | 
 | 	in_params[2].type 		= ACPI_TYPE_INTEGER; | 
 | 	in_params[2].integer.value	= context->cap.length/sizeof(u32); | 
 | 	in_params[3].type		= ACPI_TYPE_BUFFER; | 
 | 	in_params[3].buffer.length 	= context->cap.length; | 
 | 	in_params[3].buffer.pointer 	= context->cap.pointer; | 
 |  | 
 | 	status = acpi_evaluate_object(handle, "_OSC", &input, &output); | 
 | 	if (ACPI_FAILURE(status)) | 
 | 		return status; | 
 |  | 
 | 	if (!output.length) | 
 | 		return AE_NULL_OBJECT; | 
 |  | 
 | 	out_obj = output.pointer; | 
 | 	if (out_obj->type != ACPI_TYPE_BUFFER | 
 | 		|| out_obj->buffer.length != context->cap.length) { | 
 | 		acpi_print_osc_error(handle, context, | 
 | 			"_OSC evaluation returned wrong type"); | 
 | 		status = AE_TYPE; | 
 | 		goto out_kfree; | 
 | 	} | 
 | 	/* Need to ignore the bit0 in result code */ | 
 | 	errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0); | 
 | 	if (errors) { | 
 | 		if (errors & OSC_REQUEST_ERROR) | 
 | 			acpi_print_osc_error(handle, context, | 
 | 				"_OSC request failed"); | 
 | 		if (errors & OSC_INVALID_UUID_ERROR) | 
 | 			acpi_print_osc_error(handle, context, | 
 | 				"_OSC invalid UUID"); | 
 | 		if (errors & OSC_INVALID_REVISION_ERROR) | 
 | 			acpi_print_osc_error(handle, context, | 
 | 				"_OSC invalid revision"); | 
 | 		if (errors & OSC_CAPABILITIES_MASK_ERROR) { | 
 | 			if (((u32 *)context->cap.pointer)[OSC_QUERY_DWORD] | 
 | 			    & OSC_QUERY_ENABLE) | 
 | 				goto out_success; | 
 | 			status = AE_SUPPORT; | 
 | 			goto out_kfree; | 
 | 		} | 
 | 		status = AE_ERROR; | 
 | 		goto out_kfree; | 
 | 	} | 
 | out_success: | 
 | 	context->ret.length = out_obj->buffer.length; | 
 | 	context->ret.pointer = kmemdup(out_obj->buffer.pointer, | 
 | 				       context->ret.length, GFP_KERNEL); | 
 | 	if (!context->ret.pointer) { | 
 | 		status =  AE_NO_MEMORY; | 
 | 		goto out_kfree; | 
 | 	} | 
 | 	status =  AE_OK; | 
 |  | 
 | out_kfree: | 
 | 	kfree(output.pointer); | 
 | 	return status; | 
 | } | 
 | EXPORT_SYMBOL(acpi_run_osc); | 
 |  | 
 | bool osc_sb_apei_support_acked; | 
 |  | 
 | /* | 
 |  * ACPI 6.0 Section 8.4.4.2 Idle State Coordination | 
 |  * OSPM supports platform coordinated low power idle(LPI) states | 
 |  */ | 
 | bool osc_pc_lpi_support_confirmed; | 
 | EXPORT_SYMBOL_GPL(osc_pc_lpi_support_confirmed); | 
 |  | 
 | /* | 
 |  * ACPI 6.4 Operating System Capabilities for USB. | 
 |  */ | 
 | bool osc_sb_native_usb4_support_confirmed; | 
 | EXPORT_SYMBOL_GPL(osc_sb_native_usb4_support_confirmed); | 
 |  | 
 | static u8 sb_uuid_str[] = "0811B06E-4A27-44F9-8D60-3CBBC22E7B48"; | 
 | static void acpi_bus_osc_negotiate_platform_control(void) | 
 | { | 
 | 	u32 capbuf[2], *capbuf_ret; | 
 | 	struct acpi_osc_context context = { | 
 | 		.uuid_str = sb_uuid_str, | 
 | 		.rev = 1, | 
 | 		.cap.length = 8, | 
 | 		.cap.pointer = capbuf, | 
 | 	}; | 
 | 	acpi_handle handle; | 
 |  | 
 | 	capbuf[OSC_QUERY_DWORD] = OSC_QUERY_ENABLE; | 
 | 	capbuf[OSC_SUPPORT_DWORD] = OSC_SB_PR3_SUPPORT; /* _PR3 is in use */ | 
 | 	if (IS_ENABLED(CONFIG_ACPI_PROCESSOR_AGGREGATOR)) | 
 | 		capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_PAD_SUPPORT; | 
 | 	if (IS_ENABLED(CONFIG_ACPI_PROCESSOR)) | 
 | 		capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_PPC_OST_SUPPORT; | 
 |  | 
 | 	capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_HOTPLUG_OST_SUPPORT; | 
 | 	capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_PCLPI_SUPPORT; | 
 | 	if (IS_ENABLED(CONFIG_ACPI_PRMT)) | 
 | 		capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_PRM_SUPPORT; | 
 |  | 
 | #ifdef CONFIG_ARM64 | 
 | 	capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_GENERIC_INITIATOR_SUPPORT; | 
 | #endif | 
 | #ifdef CONFIG_X86 | 
 | 	capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_GENERIC_INITIATOR_SUPPORT; | 
 | 	if (boot_cpu_has(X86_FEATURE_HWP)) { | 
 | 		capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_CPC_SUPPORT; | 
 | 		capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_CPCV2_SUPPORT; | 
 | 	} | 
 | #endif | 
 |  | 
 | 	if (IS_ENABLED(CONFIG_SCHED_MC_PRIO)) | 
 | 		capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_CPC_DIVERSE_HIGH_SUPPORT; | 
 |  | 
 | 	if (IS_ENABLED(CONFIG_USB4)) | 
 | 		capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_NATIVE_USB4_SUPPORT; | 
 |  | 
 | 	if (!ghes_disable) | 
 | 		capbuf[OSC_SUPPORT_DWORD] |= OSC_SB_APEI_SUPPORT; | 
 | 	if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle))) | 
 | 		return; | 
 |  | 
 | 	if (ACPI_FAILURE(acpi_run_osc(handle, &context))) | 
 | 		return; | 
 |  | 
 | 	capbuf_ret = context.ret.pointer; | 
 | 	if (context.ret.length <= OSC_SUPPORT_DWORD) { | 
 | 		kfree(context.ret.pointer); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Now run _OSC again with query flag clear and with the caps | 
 | 	 * supported by both the OS and the platform. | 
 | 	 */ | 
 | 	capbuf[OSC_QUERY_DWORD] = 0; | 
 | 	capbuf[OSC_SUPPORT_DWORD] = capbuf_ret[OSC_SUPPORT_DWORD]; | 
 | 	kfree(context.ret.pointer); | 
 |  | 
 | 	if (ACPI_FAILURE(acpi_run_osc(handle, &context))) | 
 | 		return; | 
 |  | 
 | 	capbuf_ret = context.ret.pointer; | 
 | 	if (context.ret.length > OSC_SUPPORT_DWORD) { | 
 | 		osc_sb_apei_support_acked = | 
 | 			capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_APEI_SUPPORT; | 
 | 		osc_pc_lpi_support_confirmed = | 
 | 			capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_PCLPI_SUPPORT; | 
 | 		osc_sb_native_usb4_support_confirmed = | 
 | 			capbuf_ret[OSC_SUPPORT_DWORD] & OSC_SB_NATIVE_USB4_SUPPORT; | 
 | 	} | 
 |  | 
 | 	kfree(context.ret.pointer); | 
 | } | 
 |  | 
 | /* | 
 |  * Native control of USB4 capabilities. If any of the tunneling bits is | 
 |  * set it means OS is in control and we use software based connection | 
 |  * manager. | 
 |  */ | 
 | u32 osc_sb_native_usb4_control; | 
 | EXPORT_SYMBOL_GPL(osc_sb_native_usb4_control); | 
 |  | 
 | static void acpi_bus_decode_usb_osc(const char *msg, u32 bits) | 
 | { | 
 | 	pr_info("%s USB3%c DisplayPort%c PCIe%c XDomain%c\n", msg, | 
 | 	       (bits & OSC_USB_USB3_TUNNELING) ? '+' : '-', | 
 | 	       (bits & OSC_USB_DP_TUNNELING) ? '+' : '-', | 
 | 	       (bits & OSC_USB_PCIE_TUNNELING) ? '+' : '-', | 
 | 	       (bits & OSC_USB_XDOMAIN) ? '+' : '-'); | 
 | } | 
 |  | 
 | static u8 sb_usb_uuid_str[] = "23A0D13A-26AB-486C-9C5F-0FFA525A575A"; | 
 | static void acpi_bus_osc_negotiate_usb_control(void) | 
 | { | 
 | 	u32 capbuf[3]; | 
 | 	struct acpi_osc_context context = { | 
 | 		.uuid_str = sb_usb_uuid_str, | 
 | 		.rev = 1, | 
 | 		.cap.length = sizeof(capbuf), | 
 | 		.cap.pointer = capbuf, | 
 | 	}; | 
 | 	acpi_handle handle; | 
 | 	acpi_status status; | 
 | 	u32 control; | 
 |  | 
 | 	if (!osc_sb_native_usb4_support_confirmed) | 
 | 		return; | 
 |  | 
 | 	if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle))) | 
 | 		return; | 
 |  | 
 | 	control = OSC_USB_USB3_TUNNELING | OSC_USB_DP_TUNNELING | | 
 | 		  OSC_USB_PCIE_TUNNELING | OSC_USB_XDOMAIN; | 
 |  | 
 | 	capbuf[OSC_QUERY_DWORD] = 0; | 
 | 	capbuf[OSC_SUPPORT_DWORD] = 0; | 
 | 	capbuf[OSC_CONTROL_DWORD] = control; | 
 |  | 
 | 	status = acpi_run_osc(handle, &context); | 
 | 	if (ACPI_FAILURE(status)) | 
 | 		return; | 
 |  | 
 | 	if (context.ret.length != sizeof(capbuf)) { | 
 | 		pr_info("USB4 _OSC: returned invalid length buffer\n"); | 
 | 		goto out_free; | 
 | 	} | 
 |  | 
 | 	osc_sb_native_usb4_control = | 
 | 		control & ((u32 *)context.ret.pointer)[OSC_CONTROL_DWORD]; | 
 |  | 
 | 	acpi_bus_decode_usb_osc("USB4 _OSC: OS supports", control); | 
 | 	acpi_bus_decode_usb_osc("USB4 _OSC: OS controls", | 
 | 				osc_sb_native_usb4_control); | 
 |  | 
 | out_free: | 
 | 	kfree(context.ret.pointer); | 
 | } | 
 |  | 
 | /* -------------------------------------------------------------------------- | 
 |                              Notification Handling | 
 |    -------------------------------------------------------------------------- */ | 
 |  | 
 | /** | 
 |  * acpi_bus_notify | 
 |  * --------------- | 
 |  * Callback for all 'system-level' device notifications (values 0x00-0x7F). | 
 |  */ | 
 | static void acpi_bus_notify(acpi_handle handle, u32 type, void *data) | 
 | { | 
 | 	struct acpi_device *adev; | 
 | 	struct acpi_driver *driver; | 
 | 	u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE; | 
 | 	bool hotplug_event = false; | 
 |  | 
 | 	switch (type) { | 
 | 	case ACPI_NOTIFY_BUS_CHECK: | 
 | 		acpi_handle_debug(handle, "ACPI_NOTIFY_BUS_CHECK event\n"); | 
 | 		hotplug_event = true; | 
 | 		break; | 
 |  | 
 | 	case ACPI_NOTIFY_DEVICE_CHECK: | 
 | 		acpi_handle_debug(handle, "ACPI_NOTIFY_DEVICE_CHECK event\n"); | 
 | 		hotplug_event = true; | 
 | 		break; | 
 |  | 
 | 	case ACPI_NOTIFY_DEVICE_WAKE: | 
 | 		acpi_handle_debug(handle, "ACPI_NOTIFY_DEVICE_WAKE event\n"); | 
 | 		break; | 
 |  | 
 | 	case ACPI_NOTIFY_EJECT_REQUEST: | 
 | 		acpi_handle_debug(handle, "ACPI_NOTIFY_EJECT_REQUEST event\n"); | 
 | 		hotplug_event = true; | 
 | 		break; | 
 |  | 
 | 	case ACPI_NOTIFY_DEVICE_CHECK_LIGHT: | 
 | 		acpi_handle_debug(handle, "ACPI_NOTIFY_DEVICE_CHECK_LIGHT event\n"); | 
 | 		/* TBD: Exactly what does 'light' mean? */ | 
 | 		break; | 
 |  | 
 | 	case ACPI_NOTIFY_FREQUENCY_MISMATCH: | 
 | 		acpi_handle_err(handle, "Device cannot be configured due " | 
 | 				"to a frequency mismatch\n"); | 
 | 		break; | 
 |  | 
 | 	case ACPI_NOTIFY_BUS_MODE_MISMATCH: | 
 | 		acpi_handle_err(handle, "Device cannot be configured due " | 
 | 				"to a bus mode mismatch\n"); | 
 | 		break; | 
 |  | 
 | 	case ACPI_NOTIFY_POWER_FAULT: | 
 | 		acpi_handle_err(handle, "Device has suffered a power fault\n"); | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		acpi_handle_debug(handle, "Unknown event type 0x%x\n", type); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	adev = acpi_bus_get_acpi_device(handle); | 
 | 	if (!adev) | 
 | 		goto err; | 
 |  | 
 | 	driver = adev->driver; | 
 | 	if (driver && driver->ops.notify && | 
 | 	    (driver->flags & ACPI_DRIVER_ALL_NOTIFY_EVENTS)) | 
 | 		driver->ops.notify(adev, type); | 
 |  | 
 | 	if (!hotplug_event) { | 
 | 		acpi_bus_put_acpi_device(adev); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (ACPI_SUCCESS(acpi_hotplug_schedule(adev, type))) | 
 | 		return; | 
 |  | 
 | 	acpi_bus_put_acpi_device(adev); | 
 |  | 
 |  err: | 
 | 	acpi_evaluate_ost(handle, type, ost_code, NULL); | 
 | } | 
 |  | 
 | static void acpi_notify_device(acpi_handle handle, u32 event, void *data) | 
 | { | 
 | 	struct acpi_device *device = data; | 
 |  | 
 | 	device->driver->ops.notify(device, event); | 
 | } | 
 |  | 
 | static void acpi_notify_device_fixed(void *data) | 
 | { | 
 | 	struct acpi_device *device = data; | 
 |  | 
 | 	/* Fixed hardware devices have no handles */ | 
 | 	acpi_notify_device(NULL, ACPI_FIXED_HARDWARE_EVENT, device); | 
 | } | 
 |  | 
 | static u32 acpi_device_fixed_event(void *data) | 
 | { | 
 | 	acpi_os_execute(OSL_NOTIFY_HANDLER, acpi_notify_device_fixed, data); | 
 | 	return ACPI_INTERRUPT_HANDLED; | 
 | } | 
 |  | 
 | static int acpi_device_install_notify_handler(struct acpi_device *device) | 
 | { | 
 | 	acpi_status status; | 
 |  | 
 | 	if (device->device_type == ACPI_BUS_TYPE_POWER_BUTTON) | 
 | 		status = | 
 | 		    acpi_install_fixed_event_handler(ACPI_EVENT_POWER_BUTTON, | 
 | 						     acpi_device_fixed_event, | 
 | 						     device); | 
 | 	else if (device->device_type == ACPI_BUS_TYPE_SLEEP_BUTTON) | 
 | 		status = | 
 | 		    acpi_install_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON, | 
 | 						     acpi_device_fixed_event, | 
 | 						     device); | 
 | 	else | 
 | 		status = acpi_install_notify_handler(device->handle, | 
 | 						     ACPI_DEVICE_NOTIFY, | 
 | 						     acpi_notify_device, | 
 | 						     device); | 
 |  | 
 | 	if (ACPI_FAILURE(status)) | 
 | 		return -EINVAL; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void acpi_device_remove_notify_handler(struct acpi_device *device) | 
 | { | 
 | 	if (device->device_type == ACPI_BUS_TYPE_POWER_BUTTON) | 
 | 		acpi_remove_fixed_event_handler(ACPI_EVENT_POWER_BUTTON, | 
 | 						acpi_device_fixed_event); | 
 | 	else if (device->device_type == ACPI_BUS_TYPE_SLEEP_BUTTON) | 
 | 		acpi_remove_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON, | 
 | 						acpi_device_fixed_event); | 
 | 	else | 
 | 		acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, | 
 | 					   acpi_notify_device); | 
 | } | 
 |  | 
 | /* Handle events targeting \_SB device (at present only graceful shutdown) */ | 
 |  | 
 | #define ACPI_SB_NOTIFY_SHUTDOWN_REQUEST 0x81 | 
 | #define ACPI_SB_INDICATE_INTERVAL	10000 | 
 |  | 
 | static void sb_notify_work(struct work_struct *dummy) | 
 | { | 
 | 	acpi_handle sb_handle; | 
 |  | 
 | 	orderly_poweroff(true); | 
 |  | 
 | 	/* | 
 | 	 * After initiating graceful shutdown, the ACPI spec requires OSPM | 
 | 	 * to evaluate _OST method once every 10seconds to indicate that | 
 | 	 * the shutdown is in progress | 
 | 	 */ | 
 | 	acpi_get_handle(NULL, "\\_SB", &sb_handle); | 
 | 	while (1) { | 
 | 		pr_info("Graceful shutdown in progress.\n"); | 
 | 		acpi_evaluate_ost(sb_handle, ACPI_OST_EC_OSPM_SHUTDOWN, | 
 | 				ACPI_OST_SC_OS_SHUTDOWN_IN_PROGRESS, NULL); | 
 | 		msleep(ACPI_SB_INDICATE_INTERVAL); | 
 | 	} | 
 | } | 
 |  | 
 | static void acpi_sb_notify(acpi_handle handle, u32 event, void *data) | 
 | { | 
 | 	static DECLARE_WORK(acpi_sb_work, sb_notify_work); | 
 |  | 
 | 	if (event == ACPI_SB_NOTIFY_SHUTDOWN_REQUEST) { | 
 | 		if (!work_busy(&acpi_sb_work)) | 
 | 			schedule_work(&acpi_sb_work); | 
 | 	} else | 
 | 		pr_warn("event %x is not supported by \\_SB device\n", event); | 
 | } | 
 |  | 
 | static int __init acpi_setup_sb_notify_handler(void) | 
 | { | 
 | 	acpi_handle sb_handle; | 
 |  | 
 | 	if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &sb_handle))) | 
 | 		return -ENXIO; | 
 |  | 
 | 	if (ACPI_FAILURE(acpi_install_notify_handler(sb_handle, ACPI_DEVICE_NOTIFY, | 
 | 						acpi_sb_notify, NULL))) | 
 | 		return -EINVAL; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* -------------------------------------------------------------------------- | 
 |                              Device Matching | 
 |    -------------------------------------------------------------------------- */ | 
 |  | 
 | /** | 
 |  * acpi_get_first_physical_node - Get first physical node of an ACPI device | 
 |  * @adev:	ACPI device in question | 
 |  * | 
 |  * Return: First physical node of ACPI device @adev | 
 |  */ | 
 | struct device *acpi_get_first_physical_node(struct acpi_device *adev) | 
 | { | 
 | 	struct mutex *physical_node_lock = &adev->physical_node_lock; | 
 | 	struct device *phys_dev; | 
 |  | 
 | 	mutex_lock(physical_node_lock); | 
 | 	if (list_empty(&adev->physical_node_list)) { | 
 | 		phys_dev = NULL; | 
 | 	} else { | 
 | 		const struct acpi_device_physical_node *node; | 
 |  | 
 | 		node = list_first_entry(&adev->physical_node_list, | 
 | 					struct acpi_device_physical_node, node); | 
 |  | 
 | 		phys_dev = node->dev; | 
 | 	} | 
 | 	mutex_unlock(physical_node_lock); | 
 | 	return phys_dev; | 
 | } | 
 | EXPORT_SYMBOL_GPL(acpi_get_first_physical_node); | 
 |  | 
 | static struct acpi_device *acpi_primary_dev_companion(struct acpi_device *adev, | 
 | 						      const struct device *dev) | 
 | { | 
 | 	const struct device *phys_dev = acpi_get_first_physical_node(adev); | 
 |  | 
 | 	return phys_dev && phys_dev == dev ? adev : NULL; | 
 | } | 
 |  | 
 | /** | 
 |  * acpi_device_is_first_physical_node - Is given dev first physical node | 
 |  * @adev: ACPI companion device | 
 |  * @dev: Physical device to check | 
 |  * | 
 |  * Function checks if given @dev is the first physical devices attached to | 
 |  * the ACPI companion device. This distinction is needed in some cases | 
 |  * where the same companion device is shared between many physical devices. | 
 |  * | 
 |  * Note that the caller have to provide valid @adev pointer. | 
 |  */ | 
 | bool acpi_device_is_first_physical_node(struct acpi_device *adev, | 
 | 					const struct device *dev) | 
 | { | 
 | 	return !!acpi_primary_dev_companion(adev, dev); | 
 | } | 
 |  | 
 | /* | 
 |  * acpi_companion_match() - Can we match via ACPI companion device | 
 |  * @dev: Device in question | 
 |  * | 
 |  * Check if the given device has an ACPI companion and if that companion has | 
 |  * a valid list of PNP IDs, and if the device is the first (primary) physical | 
 |  * device associated with it.  Return the companion pointer if that's the case | 
 |  * or NULL otherwise. | 
 |  * | 
 |  * If multiple physical devices are attached to a single ACPI companion, we need | 
 |  * to be careful.  The usage scenario for this kind of relationship is that all | 
 |  * of the physical devices in question use resources provided by the ACPI | 
 |  * companion.  A typical case is an MFD device where all the sub-devices share | 
 |  * the parent's ACPI companion.  In such cases we can only allow the primary | 
 |  * (first) physical device to be matched with the help of the companion's PNP | 
 |  * IDs. | 
 |  * | 
 |  * Additional physical devices sharing the ACPI companion can still use | 
 |  * resources available from it but they will be matched normally using functions | 
 |  * provided by their bus types (and analogously for their modalias). | 
 |  */ | 
 | struct acpi_device *acpi_companion_match(const struct device *dev) | 
 | { | 
 | 	struct acpi_device *adev; | 
 |  | 
 | 	adev = ACPI_COMPANION(dev); | 
 | 	if (!adev) | 
 | 		return NULL; | 
 |  | 
 | 	if (list_empty(&adev->pnp.ids)) | 
 | 		return NULL; | 
 |  | 
 | 	return acpi_primary_dev_companion(adev, dev); | 
 | } | 
 |  | 
 | /** | 
 |  * acpi_of_match_device - Match device object using the "compatible" property. | 
 |  * @adev: ACPI device object to match. | 
 |  * @of_match_table: List of device IDs to match against. | 
 |  * @of_id: OF ID if matched | 
 |  * | 
 |  * If @dev has an ACPI companion which has ACPI_DT_NAMESPACE_HID in its list of | 
 |  * identifiers and a _DSD object with the "compatible" property, use that | 
 |  * property to match against the given list of identifiers. | 
 |  */ | 
 | static bool acpi_of_match_device(struct acpi_device *adev, | 
 | 				 const struct of_device_id *of_match_table, | 
 | 				 const struct of_device_id **of_id) | 
 | { | 
 | 	const union acpi_object *of_compatible, *obj; | 
 | 	int i, nval; | 
 |  | 
 | 	if (!adev) | 
 | 		return false; | 
 |  | 
 | 	of_compatible = adev->data.of_compatible; | 
 | 	if (!of_match_table || !of_compatible) | 
 | 		return false; | 
 |  | 
 | 	if (of_compatible->type == ACPI_TYPE_PACKAGE) { | 
 | 		nval = of_compatible->package.count; | 
 | 		obj = of_compatible->package.elements; | 
 | 	} else { /* Must be ACPI_TYPE_STRING. */ | 
 | 		nval = 1; | 
 | 		obj = of_compatible; | 
 | 	} | 
 | 	/* Now we can look for the driver DT compatible strings */ | 
 | 	for (i = 0; i < nval; i++, obj++) { | 
 | 		const struct of_device_id *id; | 
 |  | 
 | 		for (id = of_match_table; id->compatible[0]; id++) | 
 | 			if (!strcasecmp(obj->string.pointer, id->compatible)) { | 
 | 				if (of_id) | 
 | 					*of_id = id; | 
 | 				return true; | 
 | 			} | 
 | 	} | 
 |  | 
 | 	return false; | 
 | } | 
 |  | 
 | static bool acpi_of_modalias(struct acpi_device *adev, | 
 | 			     char *modalias, size_t len) | 
 | { | 
 | 	const union acpi_object *of_compatible; | 
 | 	const union acpi_object *obj; | 
 | 	const char *str, *chr; | 
 |  | 
 | 	of_compatible = adev->data.of_compatible; | 
 | 	if (!of_compatible) | 
 | 		return false; | 
 |  | 
 | 	if (of_compatible->type == ACPI_TYPE_PACKAGE) | 
 | 		obj = of_compatible->package.elements; | 
 | 	else /* Must be ACPI_TYPE_STRING. */ | 
 | 		obj = of_compatible; | 
 |  | 
 | 	str = obj->string.pointer; | 
 | 	chr = strchr(str, ','); | 
 | 	strlcpy(modalias, chr ? chr + 1 : str, len); | 
 |  | 
 | 	return true; | 
 | } | 
 |  | 
 | /** | 
 |  * acpi_set_modalias - Set modalias using "compatible" property or supplied ID | 
 |  * @adev:	ACPI device object to match | 
 |  * @default_id:	ID string to use as default if no compatible string found | 
 |  * @modalias:   Pointer to buffer that modalias value will be copied into | 
 |  * @len:	Length of modalias buffer | 
 |  * | 
 |  * This is a counterpart of of_modalias_node() for struct acpi_device objects. | 
 |  * If there is a compatible string for @adev, it will be copied to @modalias | 
 |  * with the vendor prefix stripped; otherwise, @default_id will be used. | 
 |  */ | 
 | void acpi_set_modalias(struct acpi_device *adev, const char *default_id, | 
 | 		       char *modalias, size_t len) | 
 | { | 
 | 	if (!acpi_of_modalias(adev, modalias, len)) | 
 | 		strlcpy(modalias, default_id, len); | 
 | } | 
 | EXPORT_SYMBOL_GPL(acpi_set_modalias); | 
 |  | 
 | static bool __acpi_match_device_cls(const struct acpi_device_id *id, | 
 | 				    struct acpi_hardware_id *hwid) | 
 | { | 
 | 	int i, msk, byte_shift; | 
 | 	char buf[3]; | 
 |  | 
 | 	if (!id->cls) | 
 | 		return false; | 
 |  | 
 | 	/* Apply class-code bitmask, before checking each class-code byte */ | 
 | 	for (i = 1; i <= 3; i++) { | 
 | 		byte_shift = 8 * (3 - i); | 
 | 		msk = (id->cls_msk >> byte_shift) & 0xFF; | 
 | 		if (!msk) | 
 | 			continue; | 
 |  | 
 | 		sprintf(buf, "%02x", (id->cls >> byte_shift) & msk); | 
 | 		if (strncmp(buf, &hwid->id[(i - 1) * 2], 2)) | 
 | 			return false; | 
 | 	} | 
 | 	return true; | 
 | } | 
 |  | 
 | static bool __acpi_match_device(struct acpi_device *device, | 
 | 				const struct acpi_device_id *acpi_ids, | 
 | 				const struct of_device_id *of_ids, | 
 | 				const struct acpi_device_id **acpi_id, | 
 | 				const struct of_device_id **of_id) | 
 | { | 
 | 	const struct acpi_device_id *id; | 
 | 	struct acpi_hardware_id *hwid; | 
 |  | 
 | 	/* | 
 | 	 * If the device is not present, it is unnecessary to load device | 
 | 	 * driver for it. | 
 | 	 */ | 
 | 	if (!device || !device->status.present) | 
 | 		return false; | 
 |  | 
 | 	list_for_each_entry(hwid, &device->pnp.ids, list) { | 
 | 		/* First, check the ACPI/PNP IDs provided by the caller. */ | 
 | 		if (acpi_ids) { | 
 | 			for (id = acpi_ids; id->id[0] || id->cls; id++) { | 
 | 				if (id->id[0] && !strcmp((char *)id->id, hwid->id)) | 
 | 					goto out_acpi_match; | 
 | 				if (id->cls && __acpi_match_device_cls(id, hwid)) | 
 | 					goto out_acpi_match; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * Next, check ACPI_DT_NAMESPACE_HID and try to match the | 
 | 		 * "compatible" property if found. | 
 | 		 */ | 
 | 		if (!strcmp(ACPI_DT_NAMESPACE_HID, hwid->id)) | 
 | 			return acpi_of_match_device(device, of_ids, of_id); | 
 | 	} | 
 | 	return false; | 
 |  | 
 | out_acpi_match: | 
 | 	if (acpi_id) | 
 | 		*acpi_id = id; | 
 | 	return true; | 
 | } | 
 |  | 
 | /** | 
 |  * acpi_match_device - Match a struct device against a given list of ACPI IDs | 
 |  * @ids: Array of struct acpi_device_id object to match against. | 
 |  * @dev: The device structure to match. | 
 |  * | 
 |  * Check if @dev has a valid ACPI handle and if there is a struct acpi_device | 
 |  * object for that handle and use that object to match against a given list of | 
 |  * device IDs. | 
 |  * | 
 |  * Return a pointer to the first matching ID on success or %NULL on failure. | 
 |  */ | 
 | const struct acpi_device_id *acpi_match_device(const struct acpi_device_id *ids, | 
 | 					       const struct device *dev) | 
 | { | 
 | 	const struct acpi_device_id *id = NULL; | 
 |  | 
 | 	__acpi_match_device(acpi_companion_match(dev), ids, NULL, &id, NULL); | 
 | 	return id; | 
 | } | 
 | EXPORT_SYMBOL_GPL(acpi_match_device); | 
 |  | 
 | static const void *acpi_of_device_get_match_data(const struct device *dev) | 
 | { | 
 | 	struct acpi_device *adev = ACPI_COMPANION(dev); | 
 | 	const struct of_device_id *match = NULL; | 
 |  | 
 | 	if (!acpi_of_match_device(adev, dev->driver->of_match_table, &match)) | 
 | 		return NULL; | 
 |  | 
 | 	return match->data; | 
 | } | 
 |  | 
 | const void *acpi_device_get_match_data(const struct device *dev) | 
 | { | 
 | 	const struct acpi_device_id *match; | 
 |  | 
 | 	if (!dev->driver->acpi_match_table) | 
 | 		return acpi_of_device_get_match_data(dev); | 
 |  | 
 | 	match = acpi_match_device(dev->driver->acpi_match_table, dev); | 
 | 	if (!match) | 
 | 		return NULL; | 
 |  | 
 | 	return (const void *)match->driver_data; | 
 | } | 
 | EXPORT_SYMBOL_GPL(acpi_device_get_match_data); | 
 |  | 
 | int acpi_match_device_ids(struct acpi_device *device, | 
 | 			  const struct acpi_device_id *ids) | 
 | { | 
 | 	return __acpi_match_device(device, ids, NULL, NULL, NULL) ? 0 : -ENOENT; | 
 | } | 
 | EXPORT_SYMBOL(acpi_match_device_ids); | 
 |  | 
 | bool acpi_driver_match_device(struct device *dev, | 
 | 			      const struct device_driver *drv) | 
 | { | 
 | 	if (!drv->acpi_match_table) | 
 | 		return acpi_of_match_device(ACPI_COMPANION(dev), | 
 | 					    drv->of_match_table, | 
 | 					    NULL); | 
 |  | 
 | 	return __acpi_match_device(acpi_companion_match(dev), | 
 | 				   drv->acpi_match_table, drv->of_match_table, | 
 | 				   NULL, NULL); | 
 | } | 
 | EXPORT_SYMBOL_GPL(acpi_driver_match_device); | 
 |  | 
 | /* -------------------------------------------------------------------------- | 
 |                               ACPI Driver Management | 
 |    -------------------------------------------------------------------------- */ | 
 |  | 
 | /** | 
 |  * acpi_bus_register_driver - register a driver with the ACPI bus | 
 |  * @driver: driver being registered | 
 |  * | 
 |  * Registers a driver with the ACPI bus.  Searches the namespace for all | 
 |  * devices that match the driver's criteria and binds.  Returns zero for | 
 |  * success or a negative error status for failure. | 
 |  */ | 
 | int acpi_bus_register_driver(struct acpi_driver *driver) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	if (acpi_disabled) | 
 | 		return -ENODEV; | 
 | 	driver->drv.name = driver->name; | 
 | 	driver->drv.bus = &acpi_bus_type; | 
 | 	driver->drv.owner = driver->owner; | 
 |  | 
 | 	ret = driver_register(&driver->drv); | 
 | 	return ret; | 
 | } | 
 |  | 
 | EXPORT_SYMBOL(acpi_bus_register_driver); | 
 |  | 
 | /** | 
 |  * acpi_bus_unregister_driver - unregisters a driver with the ACPI bus | 
 |  * @driver: driver to unregister | 
 |  * | 
 |  * Unregisters a driver with the ACPI bus.  Searches the namespace for all | 
 |  * devices that match the driver's criteria and unbinds. | 
 |  */ | 
 | void acpi_bus_unregister_driver(struct acpi_driver *driver) | 
 | { | 
 | 	driver_unregister(&driver->drv); | 
 | } | 
 |  | 
 | EXPORT_SYMBOL(acpi_bus_unregister_driver); | 
 |  | 
 | /* -------------------------------------------------------------------------- | 
 |                               ACPI Bus operations | 
 |    -------------------------------------------------------------------------- */ | 
 |  | 
 | static int acpi_bus_match(struct device *dev, struct device_driver *drv) | 
 | { | 
 | 	struct acpi_device *acpi_dev = to_acpi_device(dev); | 
 | 	struct acpi_driver *acpi_drv = to_acpi_driver(drv); | 
 |  | 
 | 	return acpi_dev->flags.match_driver | 
 | 		&& !acpi_match_device_ids(acpi_dev, acpi_drv->ids); | 
 | } | 
 |  | 
 | static int acpi_device_uevent(struct device *dev, struct kobj_uevent_env *env) | 
 | { | 
 | 	return __acpi_device_uevent_modalias(to_acpi_device(dev), env); | 
 | } | 
 |  | 
 | static int acpi_device_probe(struct device *dev) | 
 | { | 
 | 	struct acpi_device *acpi_dev = to_acpi_device(dev); | 
 | 	struct acpi_driver *acpi_drv = to_acpi_driver(dev->driver); | 
 | 	int ret; | 
 |  | 
 | 	if (acpi_dev->handler && !acpi_is_pnp_device(acpi_dev)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (!acpi_drv->ops.add) | 
 | 		return -ENOSYS; | 
 |  | 
 | 	ret = acpi_drv->ops.add(acpi_dev); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	acpi_dev->driver = acpi_drv; | 
 |  | 
 | 	pr_debug("Driver [%s] successfully bound to device [%s]\n", | 
 | 		 acpi_drv->name, acpi_dev->pnp.bus_id); | 
 |  | 
 | 	if (acpi_drv->ops.notify) { | 
 | 		ret = acpi_device_install_notify_handler(acpi_dev); | 
 | 		if (ret) { | 
 | 			if (acpi_drv->ops.remove) | 
 | 				acpi_drv->ops.remove(acpi_dev); | 
 |  | 
 | 			acpi_dev->driver = NULL; | 
 | 			acpi_dev->driver_data = NULL; | 
 | 			return ret; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	pr_debug("Found driver [%s] for device [%s]\n", acpi_drv->name, | 
 | 		 acpi_dev->pnp.bus_id); | 
 |  | 
 | 	get_device(dev); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void acpi_device_remove(struct device *dev) | 
 | { | 
 | 	struct acpi_device *acpi_dev = to_acpi_device(dev); | 
 | 	struct acpi_driver *acpi_drv = acpi_dev->driver; | 
 |  | 
 | 	if (acpi_drv) { | 
 | 		if (acpi_drv->ops.notify) | 
 | 			acpi_device_remove_notify_handler(acpi_dev); | 
 | 		if (acpi_drv->ops.remove) | 
 | 			acpi_drv->ops.remove(acpi_dev); | 
 | 	} | 
 | 	acpi_dev->driver = NULL; | 
 | 	acpi_dev->driver_data = NULL; | 
 |  | 
 | 	put_device(dev); | 
 | } | 
 |  | 
 | struct bus_type acpi_bus_type = { | 
 | 	.name		= "acpi", | 
 | 	.match		= acpi_bus_match, | 
 | 	.probe		= acpi_device_probe, | 
 | 	.remove		= acpi_device_remove, | 
 | 	.uevent		= acpi_device_uevent, | 
 | }; | 
 |  | 
 | /* -------------------------------------------------------------------------- | 
 |                              Initialization/Cleanup | 
 |    -------------------------------------------------------------------------- */ | 
 |  | 
 | static int __init acpi_bus_init_irq(void) | 
 | { | 
 | 	acpi_status status; | 
 | 	char *message = NULL; | 
 |  | 
 |  | 
 | 	/* | 
 | 	 * Let the system know what interrupt model we are using by | 
 | 	 * evaluating the \_PIC object, if exists. | 
 | 	 */ | 
 |  | 
 | 	switch (acpi_irq_model) { | 
 | 	case ACPI_IRQ_MODEL_PIC: | 
 | 		message = "PIC"; | 
 | 		break; | 
 | 	case ACPI_IRQ_MODEL_IOAPIC: | 
 | 		message = "IOAPIC"; | 
 | 		break; | 
 | 	case ACPI_IRQ_MODEL_IOSAPIC: | 
 | 		message = "IOSAPIC"; | 
 | 		break; | 
 | 	case ACPI_IRQ_MODEL_GIC: | 
 | 		message = "GIC"; | 
 | 		break; | 
 | 	case ACPI_IRQ_MODEL_PLATFORM: | 
 | 		message = "platform specific model"; | 
 | 		break; | 
 | 	default: | 
 | 		pr_info("Unknown interrupt routing model\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	pr_info("Using %s for interrupt routing\n", message); | 
 |  | 
 | 	status = acpi_execute_simple_method(NULL, "\\_PIC", acpi_irq_model); | 
 | 	if (ACPI_FAILURE(status) && (status != AE_NOT_FOUND)) { | 
 | 		pr_info("_PIC evaluation failed: %s\n", acpi_format_exception(status)); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * acpi_early_init - Initialize ACPICA and populate the ACPI namespace. | 
 |  * | 
 |  * The ACPI tables are accessible after this, but the handling of events has not | 
 |  * been initialized and the global lock is not available yet, so AML should not | 
 |  * be executed at this point. | 
 |  * | 
 |  * Doing this before switching the EFI runtime services to virtual mode allows | 
 |  * the EfiBootServices memory to be freed slightly earlier on boot. | 
 |  */ | 
 | void __init acpi_early_init(void) | 
 | { | 
 | 	acpi_status status; | 
 |  | 
 | 	if (acpi_disabled) | 
 | 		return; | 
 |  | 
 | 	pr_info("Core revision %08x\n", ACPI_CA_VERSION); | 
 |  | 
 | 	/* enable workarounds, unless strict ACPI spec. compliance */ | 
 | 	if (!acpi_strict) | 
 | 		acpi_gbl_enable_interpreter_slack = TRUE; | 
 |  | 
 | 	acpi_permanent_mmap = true; | 
 |  | 
 | #ifdef CONFIG_X86 | 
 | 	/* | 
 | 	 * If the machine falls into the DMI check table, | 
 | 	 * DSDT will be copied to memory. | 
 | 	 * Note that calling dmi_check_system() here on other architectures | 
 | 	 * would not be OK because only x86 initializes dmi early enough. | 
 | 	 * Thankfully only x86 systems need such quirks for now. | 
 | 	 */ | 
 | 	dmi_check_system(dsdt_dmi_table); | 
 | #endif | 
 |  | 
 | 	status = acpi_reallocate_root_table(); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		pr_err("Unable to reallocate ACPI tables\n"); | 
 | 		goto error0; | 
 | 	} | 
 |  | 
 | 	status = acpi_initialize_subsystem(); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		pr_err("Unable to initialize the ACPI Interpreter\n"); | 
 | 		goto error0; | 
 | 	} | 
 |  | 
 | #ifdef CONFIG_X86 | 
 | 	if (!acpi_ioapic) { | 
 | 		/* compatible (0) means level (3) */ | 
 | 		if (!(acpi_sci_flags & ACPI_MADT_TRIGGER_MASK)) { | 
 | 			acpi_sci_flags &= ~ACPI_MADT_TRIGGER_MASK; | 
 | 			acpi_sci_flags |= ACPI_MADT_TRIGGER_LEVEL; | 
 | 		} | 
 | 		/* Set PIC-mode SCI trigger type */ | 
 | 		acpi_pic_sci_set_trigger(acpi_gbl_FADT.sci_interrupt, | 
 | 					 (acpi_sci_flags & ACPI_MADT_TRIGGER_MASK) >> 2); | 
 | 	} else { | 
 | 		/* | 
 | 		 * now that acpi_gbl_FADT is initialized, | 
 | 		 * update it with result from INT_SRC_OVR parsing | 
 | 		 */ | 
 | 		acpi_gbl_FADT.sci_interrupt = acpi_sci_override_gsi; | 
 | 	} | 
 | #endif | 
 | 	return; | 
 |  | 
 |  error0: | 
 | 	disable_acpi(); | 
 | } | 
 |  | 
 | /** | 
 |  * acpi_subsystem_init - Finalize the early initialization of ACPI. | 
 |  * | 
 |  * Switch over the platform to the ACPI mode (if possible). | 
 |  * | 
 |  * Doing this too early is generally unsafe, but at the same time it needs to be | 
 |  * done before all things that really depend on ACPI.  The right spot appears to | 
 |  * be before finalizing the EFI initialization. | 
 |  */ | 
 | void __init acpi_subsystem_init(void) | 
 | { | 
 | 	acpi_status status; | 
 |  | 
 | 	if (acpi_disabled) | 
 | 		return; | 
 |  | 
 | 	status = acpi_enable_subsystem(~ACPI_NO_ACPI_ENABLE); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		pr_err("Unable to enable ACPI\n"); | 
 | 		disable_acpi(); | 
 | 	} else { | 
 | 		/* | 
 | 		 * If the system is using ACPI then we can be reasonably | 
 | 		 * confident that any regulators are managed by the firmware | 
 | 		 * so tell the regulator core it has everything it needs to | 
 | 		 * know. | 
 | 		 */ | 
 | 		regulator_has_full_constraints(); | 
 | 	} | 
 | } | 
 |  | 
 | static acpi_status acpi_bus_table_handler(u32 event, void *table, void *context) | 
 | { | 
 | 	if (event == ACPI_TABLE_EVENT_LOAD) | 
 | 		acpi_scan_table_notify(); | 
 |  | 
 | 	return acpi_sysfs_table_handler(event, table, context); | 
 | } | 
 |  | 
 | static int __init acpi_bus_init(void) | 
 | { | 
 | 	int result; | 
 | 	acpi_status status; | 
 |  | 
 | 	acpi_os_initialize1(); | 
 |  | 
 | 	status = acpi_load_tables(); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		pr_err("Unable to load the System Description Tables\n"); | 
 | 		goto error1; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * ACPI 2.0 requires the EC driver to be loaded and work before the EC | 
 | 	 * device is found in the namespace. | 
 | 	 * | 
 | 	 * This is accomplished by looking for the ECDT table and getting the EC | 
 | 	 * parameters out of that. | 
 | 	 * | 
 | 	 * Do that before calling acpi_initialize_objects() which may trigger EC | 
 | 	 * address space accesses. | 
 | 	 */ | 
 | 	acpi_ec_ecdt_probe(); | 
 |  | 
 | 	status = acpi_enable_subsystem(ACPI_NO_ACPI_ENABLE); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		pr_err("Unable to start the ACPI Interpreter\n"); | 
 | 		goto error1; | 
 | 	} | 
 |  | 
 | 	status = acpi_initialize_objects(ACPI_FULL_INITIALIZATION); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		pr_err("Unable to initialize ACPI objects\n"); | 
 | 		goto error1; | 
 | 	} | 
 |  | 
 | 	/* Set capability bits for _OSC under processor scope */ | 
 | 	acpi_early_processor_osc(); | 
 |  | 
 | 	/* | 
 | 	 * _OSC method may exist in module level code, | 
 | 	 * so it must be run after ACPI_FULL_INITIALIZATION | 
 | 	 */ | 
 | 	acpi_bus_osc_negotiate_platform_control(); | 
 | 	acpi_bus_osc_negotiate_usb_control(); | 
 |  | 
 | 	/* | 
 | 	 * _PDC control method may load dynamic SSDT tables, | 
 | 	 * and we need to install the table handler before that. | 
 | 	 */ | 
 | 	status = acpi_install_table_handler(acpi_bus_table_handler, NULL); | 
 |  | 
 | 	acpi_sysfs_init(); | 
 |  | 
 | 	acpi_early_processor_set_pdc(); | 
 |  | 
 | 	/* | 
 | 	 * Maybe EC region is required at bus_scan/acpi_get_devices. So it | 
 | 	 * is necessary to enable it as early as possible. | 
 | 	 */ | 
 | 	acpi_ec_dsdt_probe(); | 
 |  | 
 | 	pr_info("Interpreter enabled\n"); | 
 |  | 
 | 	/* Initialize sleep structures */ | 
 | 	acpi_sleep_init(); | 
 |  | 
 | 	/* | 
 | 	 * Get the system interrupt model and evaluate \_PIC. | 
 | 	 */ | 
 | 	result = acpi_bus_init_irq(); | 
 | 	if (result) | 
 | 		goto error1; | 
 |  | 
 | 	/* | 
 | 	 * Register the for all standard device notifications. | 
 | 	 */ | 
 | 	status = | 
 | 	    acpi_install_notify_handler(ACPI_ROOT_OBJECT, ACPI_SYSTEM_NOTIFY, | 
 | 					&acpi_bus_notify, NULL); | 
 | 	if (ACPI_FAILURE(status)) { | 
 | 		pr_err("Unable to register for system notifications\n"); | 
 | 		goto error1; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Create the top ACPI proc directory | 
 | 	 */ | 
 | 	acpi_root_dir = proc_mkdir(ACPI_BUS_FILE_ROOT, NULL); | 
 |  | 
 | 	result = bus_register(&acpi_bus_type); | 
 | 	if (!result) | 
 | 		return 0; | 
 |  | 
 | 	/* Mimic structured exception handling */ | 
 |       error1: | 
 | 	acpi_terminate(); | 
 | 	return -ENODEV; | 
 | } | 
 |  | 
 | struct kobject *acpi_kobj; | 
 | EXPORT_SYMBOL_GPL(acpi_kobj); | 
 |  | 
 | static int __init acpi_init(void) | 
 | { | 
 | 	int result; | 
 |  | 
 | 	if (acpi_disabled) { | 
 | 		pr_info("Interpreter disabled.\n"); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	acpi_kobj = kobject_create_and_add("acpi", firmware_kobj); | 
 | 	if (!acpi_kobj) | 
 | 		pr_debug("%s: kset create error\n", __func__); | 
 |  | 
 | 	init_prmt(); | 
 | 	result = acpi_bus_init(); | 
 | 	if (result) { | 
 | 		kobject_put(acpi_kobj); | 
 | 		disable_acpi(); | 
 | 		return result; | 
 | 	} | 
 |  | 
 | 	pci_mmcfg_late_init(); | 
 | 	acpi_iort_init(); | 
 | 	acpi_scan_init(); | 
 | 	acpi_ec_init(); | 
 | 	acpi_debugfs_init(); | 
 | 	acpi_sleep_proc_init(); | 
 | 	acpi_wakeup_device_init(); | 
 | 	acpi_debugger_init(); | 
 | 	acpi_setup_sb_notify_handler(); | 
 | 	acpi_viot_init(); | 
 | 	return 0; | 
 | } | 
 |  | 
 | subsys_initcall(acpi_init); |