|  | // SPDX-License-Identifier: GPL-2.0+ | 
|  | /* | 
|  | * f_eem.c -- USB CDC Ethernet (EEM) link function driver | 
|  | * | 
|  | * Copyright (C) 2003-2005,2008 David Brownell | 
|  | * Copyright (C) 2008 Nokia Corporation | 
|  | * Copyright (C) 2009 EF Johnson Technologies | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/crc32.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | #include "u_ether.h" | 
|  | #include "u_ether_configfs.h" | 
|  | #include "u_eem.h" | 
|  |  | 
|  | #define EEM_HLEN 2 | 
|  |  | 
|  | /* | 
|  | * This function is a "CDC Ethernet Emulation Model" (CDC EEM) | 
|  | * Ethernet link. | 
|  | */ | 
|  |  | 
|  | struct f_eem { | 
|  | struct gether			port; | 
|  | u8				ctrl_id; | 
|  | }; | 
|  |  | 
|  | static inline struct f_eem *func_to_eem(struct usb_function *f) | 
|  | { | 
|  | return container_of(f, struct f_eem, port.func); | 
|  | } | 
|  |  | 
|  | /*-------------------------------------------------------------------------*/ | 
|  |  | 
|  | /* interface descriptor: */ | 
|  |  | 
|  | static struct usb_interface_descriptor eem_intf = { | 
|  | .bLength =		sizeof eem_intf, | 
|  | .bDescriptorType =	USB_DT_INTERFACE, | 
|  |  | 
|  | /* .bInterfaceNumber = DYNAMIC */ | 
|  | .bNumEndpoints =	2, | 
|  | .bInterfaceClass =	USB_CLASS_COMM, | 
|  | .bInterfaceSubClass =	USB_CDC_SUBCLASS_EEM, | 
|  | .bInterfaceProtocol =	USB_CDC_PROTO_EEM, | 
|  | /* .iInterface = DYNAMIC */ | 
|  | }; | 
|  |  | 
|  | /* full speed support: */ | 
|  |  | 
|  | static struct usb_endpoint_descriptor eem_fs_in_desc = { | 
|  | .bLength =		USB_DT_ENDPOINT_SIZE, | 
|  | .bDescriptorType =	USB_DT_ENDPOINT, | 
|  |  | 
|  | .bEndpointAddress =	USB_DIR_IN, | 
|  | .bmAttributes =		USB_ENDPOINT_XFER_BULK, | 
|  | }; | 
|  |  | 
|  | static struct usb_endpoint_descriptor eem_fs_out_desc = { | 
|  | .bLength =		USB_DT_ENDPOINT_SIZE, | 
|  | .bDescriptorType =	USB_DT_ENDPOINT, | 
|  |  | 
|  | .bEndpointAddress =	USB_DIR_OUT, | 
|  | .bmAttributes =		USB_ENDPOINT_XFER_BULK, | 
|  | }; | 
|  |  | 
|  | static struct usb_descriptor_header *eem_fs_function[] = { | 
|  | /* CDC EEM control descriptors */ | 
|  | (struct usb_descriptor_header *) &eem_intf, | 
|  | (struct usb_descriptor_header *) &eem_fs_in_desc, | 
|  | (struct usb_descriptor_header *) &eem_fs_out_desc, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | /* high speed support: */ | 
|  |  | 
|  | static struct usb_endpoint_descriptor eem_hs_in_desc = { | 
|  | .bLength =		USB_DT_ENDPOINT_SIZE, | 
|  | .bDescriptorType =	USB_DT_ENDPOINT, | 
|  |  | 
|  | .bEndpointAddress =	USB_DIR_IN, | 
|  | .bmAttributes =		USB_ENDPOINT_XFER_BULK, | 
|  | .wMaxPacketSize =	cpu_to_le16(512), | 
|  | }; | 
|  |  | 
|  | static struct usb_endpoint_descriptor eem_hs_out_desc = { | 
|  | .bLength =		USB_DT_ENDPOINT_SIZE, | 
|  | .bDescriptorType =	USB_DT_ENDPOINT, | 
|  |  | 
|  | .bEndpointAddress =	USB_DIR_OUT, | 
|  | .bmAttributes =		USB_ENDPOINT_XFER_BULK, | 
|  | .wMaxPacketSize =	cpu_to_le16(512), | 
|  | }; | 
|  |  | 
|  | static struct usb_descriptor_header *eem_hs_function[] = { | 
|  | /* CDC EEM control descriptors */ | 
|  | (struct usb_descriptor_header *) &eem_intf, | 
|  | (struct usb_descriptor_header *) &eem_hs_in_desc, | 
|  | (struct usb_descriptor_header *) &eem_hs_out_desc, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | /* super speed support: */ | 
|  |  | 
|  | static struct usb_endpoint_descriptor eem_ss_in_desc = { | 
|  | .bLength =		USB_DT_ENDPOINT_SIZE, | 
|  | .bDescriptorType =	USB_DT_ENDPOINT, | 
|  |  | 
|  | .bEndpointAddress =	USB_DIR_IN, | 
|  | .bmAttributes =		USB_ENDPOINT_XFER_BULK, | 
|  | .wMaxPacketSize =	cpu_to_le16(1024), | 
|  | }; | 
|  |  | 
|  | static struct usb_endpoint_descriptor eem_ss_out_desc = { | 
|  | .bLength =		USB_DT_ENDPOINT_SIZE, | 
|  | .bDescriptorType =	USB_DT_ENDPOINT, | 
|  |  | 
|  | .bEndpointAddress =	USB_DIR_OUT, | 
|  | .bmAttributes =		USB_ENDPOINT_XFER_BULK, | 
|  | .wMaxPacketSize =	cpu_to_le16(1024), | 
|  | }; | 
|  |  | 
|  | static struct usb_ss_ep_comp_descriptor eem_ss_bulk_comp_desc = { | 
|  | .bLength =		sizeof eem_ss_bulk_comp_desc, | 
|  | .bDescriptorType =	USB_DT_SS_ENDPOINT_COMP, | 
|  |  | 
|  | /* the following 2 values can be tweaked if necessary */ | 
|  | /* .bMaxBurst =		0, */ | 
|  | /* .bmAttributes =	0, */ | 
|  | }; | 
|  |  | 
|  | static struct usb_descriptor_header *eem_ss_function[] = { | 
|  | /* CDC EEM control descriptors */ | 
|  | (struct usb_descriptor_header *) &eem_intf, | 
|  | (struct usb_descriptor_header *) &eem_ss_in_desc, | 
|  | (struct usb_descriptor_header *) &eem_ss_bulk_comp_desc, | 
|  | (struct usb_descriptor_header *) &eem_ss_out_desc, | 
|  | (struct usb_descriptor_header *) &eem_ss_bulk_comp_desc, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | /* string descriptors: */ | 
|  |  | 
|  | static struct usb_string eem_string_defs[] = { | 
|  | [0].s = "CDC Ethernet Emulation Model (EEM)", | 
|  | {  } /* end of list */ | 
|  | }; | 
|  |  | 
|  | static struct usb_gadget_strings eem_string_table = { | 
|  | .language =		0x0409,	/* en-us */ | 
|  | .strings =		eem_string_defs, | 
|  | }; | 
|  |  | 
|  | static struct usb_gadget_strings *eem_strings[] = { | 
|  | &eem_string_table, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | /*-------------------------------------------------------------------------*/ | 
|  |  | 
|  | static int eem_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl) | 
|  | { | 
|  | struct usb_composite_dev *cdev = f->config->cdev; | 
|  | u16			w_index = le16_to_cpu(ctrl->wIndex); | 
|  | u16			w_value = le16_to_cpu(ctrl->wValue); | 
|  | u16			w_length = le16_to_cpu(ctrl->wLength); | 
|  |  | 
|  | DBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n", | 
|  | ctrl->bRequestType, ctrl->bRequest, | 
|  | w_value, w_index, w_length); | 
|  |  | 
|  | /* device either stalls (value < 0) or reports success */ | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int eem_set_alt(struct usb_function *f, unsigned intf, unsigned alt) | 
|  | { | 
|  | struct f_eem		*eem = func_to_eem(f); | 
|  | struct usb_composite_dev *cdev = f->config->cdev; | 
|  | struct net_device	*net; | 
|  |  | 
|  | /* we know alt == 0, so this is an activation or a reset */ | 
|  | if (alt != 0) | 
|  | goto fail; | 
|  |  | 
|  | if (intf == eem->ctrl_id) { | 
|  | DBG(cdev, "reset eem\n"); | 
|  | gether_disconnect(&eem->port); | 
|  |  | 
|  | if (!eem->port.in_ep->desc || !eem->port.out_ep->desc) { | 
|  | DBG(cdev, "init eem\n"); | 
|  | if (config_ep_by_speed(cdev->gadget, f, | 
|  | eem->port.in_ep) || | 
|  | config_ep_by_speed(cdev->gadget, f, | 
|  | eem->port.out_ep)) { | 
|  | eem->port.in_ep->desc = NULL; | 
|  | eem->port.out_ep->desc = NULL; | 
|  | goto fail; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* zlps should not occur because zero-length EEM packets | 
|  | * will be inserted in those cases where they would occur | 
|  | */ | 
|  | eem->port.is_zlp_ok = 1; | 
|  | eem->port.cdc_filter = DEFAULT_FILTER; | 
|  | DBG(cdev, "activate eem\n"); | 
|  | net = gether_connect(&eem->port); | 
|  | if (IS_ERR(net)) | 
|  | return PTR_ERR(net); | 
|  | } else | 
|  | goto fail; | 
|  |  | 
|  | return 0; | 
|  | fail: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static void eem_disable(struct usb_function *f) | 
|  | { | 
|  | struct f_eem		*eem = func_to_eem(f); | 
|  | struct usb_composite_dev *cdev = f->config->cdev; | 
|  |  | 
|  | DBG(cdev, "eem deactivated\n"); | 
|  |  | 
|  | if (eem->port.in_ep->enabled) | 
|  | gether_disconnect(&eem->port); | 
|  | } | 
|  |  | 
|  | /*-------------------------------------------------------------------------*/ | 
|  |  | 
|  | /* EEM function driver setup/binding */ | 
|  |  | 
|  | static int eem_bind(struct usb_configuration *c, struct usb_function *f) | 
|  | { | 
|  | struct usb_composite_dev *cdev = c->cdev; | 
|  | struct f_eem		*eem = func_to_eem(f); | 
|  | struct usb_string	*us; | 
|  | int			status; | 
|  | struct usb_ep		*ep; | 
|  |  | 
|  | struct f_eem_opts	*eem_opts; | 
|  |  | 
|  | eem_opts = container_of(f->fi, struct f_eem_opts, func_inst); | 
|  | /* | 
|  | * in drivers/usb/gadget/configfs.c:configfs_composite_bind() | 
|  | * configurations are bound in sequence with list_for_each_entry, | 
|  | * in each configuration its functions are bound in sequence | 
|  | * with list_for_each_entry, so we assume no race condition | 
|  | * with regard to eem_opts->bound access | 
|  | */ | 
|  | if (!eem_opts->bound) { | 
|  | mutex_lock(&eem_opts->lock); | 
|  | gether_set_gadget(eem_opts->net, cdev->gadget); | 
|  | status = gether_register_netdev(eem_opts->net); | 
|  | mutex_unlock(&eem_opts->lock); | 
|  | if (status) | 
|  | return status; | 
|  | eem_opts->bound = true; | 
|  | } | 
|  |  | 
|  | us = usb_gstrings_attach(cdev, eem_strings, | 
|  | ARRAY_SIZE(eem_string_defs)); | 
|  | if (IS_ERR(us)) | 
|  | return PTR_ERR(us); | 
|  | eem_intf.iInterface = us[0].id; | 
|  |  | 
|  | /* allocate instance-specific interface IDs */ | 
|  | status = usb_interface_id(c, f); | 
|  | if (status < 0) | 
|  | goto fail; | 
|  | eem->ctrl_id = status; | 
|  | eem_intf.bInterfaceNumber = status; | 
|  |  | 
|  | status = -ENODEV; | 
|  |  | 
|  | /* allocate instance-specific endpoints */ | 
|  | ep = usb_ep_autoconfig(cdev->gadget, &eem_fs_in_desc); | 
|  | if (!ep) | 
|  | goto fail; | 
|  | eem->port.in_ep = ep; | 
|  |  | 
|  | ep = usb_ep_autoconfig(cdev->gadget, &eem_fs_out_desc); | 
|  | if (!ep) | 
|  | goto fail; | 
|  | eem->port.out_ep = ep; | 
|  |  | 
|  | status = -ENOMEM; | 
|  |  | 
|  | /* support all relevant hardware speeds... we expect that when | 
|  | * hardware is dual speed, all bulk-capable endpoints work at | 
|  | * both speeds | 
|  | */ | 
|  | eem_hs_in_desc.bEndpointAddress = eem_fs_in_desc.bEndpointAddress; | 
|  | eem_hs_out_desc.bEndpointAddress = eem_fs_out_desc.bEndpointAddress; | 
|  |  | 
|  | eem_ss_in_desc.bEndpointAddress = eem_fs_in_desc.bEndpointAddress; | 
|  | eem_ss_out_desc.bEndpointAddress = eem_fs_out_desc.bEndpointAddress; | 
|  |  | 
|  | status = usb_assign_descriptors(f, eem_fs_function, eem_hs_function, | 
|  | eem_ss_function, NULL); | 
|  | if (status) | 
|  | goto fail; | 
|  |  | 
|  | DBG(cdev, "CDC Ethernet (EEM): %s speed IN/%s OUT/%s\n", | 
|  | gadget_is_superspeed(c->cdev->gadget) ? "super" : | 
|  | gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full", | 
|  | eem->port.in_ep->name, eem->port.out_ep->name); | 
|  | return 0; | 
|  |  | 
|  | fail: | 
|  | ERROR(cdev, "%s: can't bind, err %d\n", f->name, status); | 
|  |  | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static void eem_cmd_complete(struct usb_ep *ep, struct usb_request *req) | 
|  | { | 
|  | struct sk_buff *skb = (struct sk_buff *)req->context; | 
|  |  | 
|  | dev_kfree_skb_any(skb); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Add the EEM header and ethernet checksum. | 
|  | * We currently do not attempt to put multiple ethernet frames | 
|  | * into a single USB transfer | 
|  | */ | 
|  | static struct sk_buff *eem_wrap(struct gether *port, struct sk_buff *skb) | 
|  | { | 
|  | struct sk_buff	*skb2 = NULL; | 
|  | struct usb_ep	*in = port->in_ep; | 
|  | int		headroom, tailroom, padlen = 0; | 
|  | u16		len; | 
|  |  | 
|  | if (!skb) | 
|  | return NULL; | 
|  |  | 
|  | len = skb->len; | 
|  | headroom = skb_headroom(skb); | 
|  | tailroom = skb_tailroom(skb); | 
|  |  | 
|  | /* When (len + EEM_HLEN + ETH_FCS_LEN) % in->maxpacket) is 0, | 
|  | * stick two bytes of zero-length EEM packet on the end. | 
|  | */ | 
|  | if (((len + EEM_HLEN + ETH_FCS_LEN) % in->maxpacket) == 0) | 
|  | padlen += 2; | 
|  |  | 
|  | if ((tailroom >= (ETH_FCS_LEN + padlen)) && | 
|  | (headroom >= EEM_HLEN) && !skb_cloned(skb)) | 
|  | goto done; | 
|  |  | 
|  | skb2 = skb_copy_expand(skb, EEM_HLEN, ETH_FCS_LEN + padlen, GFP_ATOMIC); | 
|  | dev_kfree_skb_any(skb); | 
|  | skb = skb2; | 
|  | if (!skb) | 
|  | return skb; | 
|  |  | 
|  | done: | 
|  | /* use the "no CRC" option */ | 
|  | put_unaligned_be32(0xdeadbeef, skb_put(skb, 4)); | 
|  |  | 
|  | /* EEM packet header format: | 
|  | * b0..13:	length of ethernet frame | 
|  | * b14:		bmCRC (0 == sentinel CRC) | 
|  | * b15:		bmType (0 == data) | 
|  | */ | 
|  | len = skb->len; | 
|  | put_unaligned_le16(len & 0x3FFF, skb_push(skb, 2)); | 
|  |  | 
|  | /* add a zero-length EEM packet, if needed */ | 
|  | if (padlen) | 
|  | put_unaligned_le16(0, skb_put(skb, 2)); | 
|  |  | 
|  | return skb; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Remove the EEM header.  Note that there can be many EEM packets in a single | 
|  | * USB transfer, so we need to break them out and handle them independently. | 
|  | */ | 
|  | static int eem_unwrap(struct gether *port, | 
|  | struct sk_buff *skb, | 
|  | struct sk_buff_head *list) | 
|  | { | 
|  | struct usb_composite_dev	*cdev = port->func.config->cdev; | 
|  | int				status = 0; | 
|  |  | 
|  | do { | 
|  | struct sk_buff	*skb2; | 
|  | u16		header; | 
|  | u16		len = 0; | 
|  |  | 
|  | if (skb->len < EEM_HLEN) { | 
|  | status = -EINVAL; | 
|  | DBG(cdev, "invalid EEM header\n"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | /* remove the EEM header */ | 
|  | header = get_unaligned_le16(skb->data); | 
|  | skb_pull(skb, EEM_HLEN); | 
|  |  | 
|  | /* EEM packet header format: | 
|  | * b0..14:	EEM type dependent (data or command) | 
|  | * b15:		bmType (0 == data, 1 == command) | 
|  | */ | 
|  | if (header & BIT(15)) { | 
|  | struct usb_request	*req = cdev->req; | 
|  | u16			bmEEMCmd; | 
|  |  | 
|  | /* EEM command packet format: | 
|  | * b0..10:	bmEEMCmdParam | 
|  | * b11..13:	bmEEMCmd | 
|  | * b14:		reserved (must be zero) | 
|  | * b15:		bmType (1 == command) | 
|  | */ | 
|  | if (header & BIT(14)) | 
|  | continue; | 
|  |  | 
|  | bmEEMCmd = (header >> 11) & 0x7; | 
|  | switch (bmEEMCmd) { | 
|  | case 0: /* echo */ | 
|  | len = header & 0x7FF; | 
|  | if (skb->len < len) { | 
|  | status = -EOVERFLOW; | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | skb2 = skb_clone(skb, GFP_ATOMIC); | 
|  | if (unlikely(!skb2)) { | 
|  | DBG(cdev, "EEM echo response error\n"); | 
|  | goto next; | 
|  | } | 
|  | skb_trim(skb2, len); | 
|  | put_unaligned_le16(BIT(15) | BIT(11) | len, | 
|  | skb_push(skb2, 2)); | 
|  | skb_copy_bits(skb2, 0, req->buf, skb2->len); | 
|  | req->length = skb2->len; | 
|  | req->complete = eem_cmd_complete; | 
|  | req->zero = 1; | 
|  | req->context = skb2; | 
|  | if (usb_ep_queue(port->in_ep, req, GFP_ATOMIC)) | 
|  | DBG(cdev, "echo response queue fail\n"); | 
|  | break; | 
|  |  | 
|  | case 1:  /* echo response */ | 
|  | case 2:  /* suspend hint */ | 
|  | case 3:  /* response hint */ | 
|  | case 4:  /* response complete hint */ | 
|  | case 5:  /* tickle */ | 
|  | default: /* reserved */ | 
|  | continue; | 
|  | } | 
|  | } else { | 
|  | u32		crc, crc2; | 
|  | struct sk_buff	*skb3; | 
|  |  | 
|  | /* check for zero-length EEM packet */ | 
|  | if (header == 0) | 
|  | continue; | 
|  |  | 
|  | /* EEM data packet format: | 
|  | * b0..13:	length of ethernet frame | 
|  | * b14:		bmCRC (0 == sentinel, 1 == calculated) | 
|  | * b15:		bmType (0 == data) | 
|  | */ | 
|  | len = header & 0x3FFF; | 
|  | if ((skb->len < len) | 
|  | || (len < (ETH_HLEN + ETH_FCS_LEN))) { | 
|  | status = -EINVAL; | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | /* validate CRC */ | 
|  | if (header & BIT(14)) { | 
|  | crc = get_unaligned_le32(skb->data + len | 
|  | - ETH_FCS_LEN); | 
|  | crc2 = ~crc32_le(~0, | 
|  | skb->data, len - ETH_FCS_LEN); | 
|  | } else { | 
|  | crc = get_unaligned_be32(skb->data + len | 
|  | - ETH_FCS_LEN); | 
|  | crc2 = 0xdeadbeef; | 
|  | } | 
|  | if (crc != crc2) { | 
|  | DBG(cdev, "invalid EEM CRC\n"); | 
|  | goto next; | 
|  | } | 
|  |  | 
|  | skb2 = skb_clone(skb, GFP_ATOMIC); | 
|  | if (unlikely(!skb2)) { | 
|  | DBG(cdev, "unable to unframe EEM packet\n"); | 
|  | continue; | 
|  | } | 
|  | skb_trim(skb2, len - ETH_FCS_LEN); | 
|  |  | 
|  | skb3 = skb_copy_expand(skb2, | 
|  | NET_IP_ALIGN, | 
|  | 0, | 
|  | GFP_ATOMIC); | 
|  | if (unlikely(!skb3)) { | 
|  | dev_kfree_skb_any(skb2); | 
|  | continue; | 
|  | } | 
|  | dev_kfree_skb_any(skb2); | 
|  | skb_queue_tail(list, skb3); | 
|  | } | 
|  | next: | 
|  | skb_pull(skb, len); | 
|  | } while (skb->len); | 
|  |  | 
|  | error: | 
|  | dev_kfree_skb_any(skb); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static inline struct f_eem_opts *to_f_eem_opts(struct config_item *item) | 
|  | { | 
|  | return container_of(to_config_group(item), struct f_eem_opts, | 
|  | func_inst.group); | 
|  | } | 
|  |  | 
|  | /* f_eem_item_ops */ | 
|  | USB_ETHERNET_CONFIGFS_ITEM(eem); | 
|  |  | 
|  | /* f_eem_opts_dev_addr */ | 
|  | USB_ETHERNET_CONFIGFS_ITEM_ATTR_DEV_ADDR(eem); | 
|  |  | 
|  | /* f_eem_opts_host_addr */ | 
|  | USB_ETHERNET_CONFIGFS_ITEM_ATTR_HOST_ADDR(eem); | 
|  |  | 
|  | /* f_eem_opts_qmult */ | 
|  | USB_ETHERNET_CONFIGFS_ITEM_ATTR_QMULT(eem); | 
|  |  | 
|  | /* f_eem_opts_ifname */ | 
|  | USB_ETHERNET_CONFIGFS_ITEM_ATTR_IFNAME(eem); | 
|  |  | 
|  | static struct configfs_attribute *eem_attrs[] = { | 
|  | &eem_opts_attr_dev_addr, | 
|  | &eem_opts_attr_host_addr, | 
|  | &eem_opts_attr_qmult, | 
|  | &eem_opts_attr_ifname, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | static const struct config_item_type eem_func_type = { | 
|  | .ct_item_ops	= &eem_item_ops, | 
|  | .ct_attrs	= eem_attrs, | 
|  | .ct_owner	= THIS_MODULE, | 
|  | }; | 
|  |  | 
|  | static void eem_free_inst(struct usb_function_instance *f) | 
|  | { | 
|  | struct f_eem_opts *opts; | 
|  |  | 
|  | opts = container_of(f, struct f_eem_opts, func_inst); | 
|  | if (opts->bound) | 
|  | gether_cleanup(netdev_priv(opts->net)); | 
|  | else | 
|  | free_netdev(opts->net); | 
|  | kfree(opts); | 
|  | } | 
|  |  | 
|  | static struct usb_function_instance *eem_alloc_inst(void) | 
|  | { | 
|  | struct f_eem_opts *opts; | 
|  |  | 
|  | opts = kzalloc(sizeof(*opts), GFP_KERNEL); | 
|  | if (!opts) | 
|  | return ERR_PTR(-ENOMEM); | 
|  | mutex_init(&opts->lock); | 
|  | opts->func_inst.free_func_inst = eem_free_inst; | 
|  | opts->net = gether_setup_default(); | 
|  | if (IS_ERR(opts->net)) { | 
|  | struct net_device *net = opts->net; | 
|  | kfree(opts); | 
|  | return ERR_CAST(net); | 
|  | } | 
|  |  | 
|  | config_group_init_type_name(&opts->func_inst.group, "", &eem_func_type); | 
|  |  | 
|  | return &opts->func_inst; | 
|  | } | 
|  |  | 
|  | static void eem_free(struct usb_function *f) | 
|  | { | 
|  | struct f_eem *eem; | 
|  | struct f_eem_opts *opts; | 
|  |  | 
|  | eem = func_to_eem(f); | 
|  | opts = container_of(f->fi, struct f_eem_opts, func_inst); | 
|  | kfree(eem); | 
|  | mutex_lock(&opts->lock); | 
|  | opts->refcnt--; | 
|  | mutex_unlock(&opts->lock); | 
|  | } | 
|  |  | 
|  | static void eem_unbind(struct usb_configuration *c, struct usb_function *f) | 
|  | { | 
|  | DBG(c->cdev, "eem unbind\n"); | 
|  |  | 
|  | usb_free_all_descriptors(f); | 
|  | } | 
|  |  | 
|  | static struct usb_function *eem_alloc(struct usb_function_instance *fi) | 
|  | { | 
|  | struct f_eem	*eem; | 
|  | struct f_eem_opts *opts; | 
|  |  | 
|  | /* allocate and initialize one new instance */ | 
|  | eem = kzalloc(sizeof(*eem), GFP_KERNEL); | 
|  | if (!eem) | 
|  | return ERR_PTR(-ENOMEM); | 
|  |  | 
|  | opts = container_of(fi, struct f_eem_opts, func_inst); | 
|  | mutex_lock(&opts->lock); | 
|  | opts->refcnt++; | 
|  |  | 
|  | eem->port.ioport = netdev_priv(opts->net); | 
|  | mutex_unlock(&opts->lock); | 
|  | eem->port.cdc_filter = DEFAULT_FILTER; | 
|  |  | 
|  | eem->port.func.name = "cdc_eem"; | 
|  | /* descriptors are per-instance copies */ | 
|  | eem->port.func.bind = eem_bind; | 
|  | eem->port.func.unbind = eem_unbind; | 
|  | eem->port.func.set_alt = eem_set_alt; | 
|  | eem->port.func.setup = eem_setup; | 
|  | eem->port.func.disable = eem_disable; | 
|  | eem->port.func.free_func = eem_free; | 
|  | eem->port.wrap = eem_wrap; | 
|  | eem->port.unwrap = eem_unwrap; | 
|  | eem->port.header_len = EEM_HLEN; | 
|  |  | 
|  | return &eem->port.func; | 
|  | } | 
|  |  | 
|  | DECLARE_USB_FUNCTION_INIT(eem, eem_alloc_inst, eem_alloc); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_AUTHOR("David Brownell"); |