include/uapi/linux/nitro_enclaves.h - third_party/kernel - Git at Google

 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
 /*
  * Copyright 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
  */

 #ifndef _UAPI_LINUX_NITRO_ENCLAVES_H_
 #define _UAPI_LINUX_NITRO_ENCLAVES_H_

 #include <linux/types.h>

 /**
  * DOC: Nitro Enclaves (NE) Kernel Driver Interface
  */

 /**
  * NE_CREATE_VM - The command is used to create a slot that is associated with
  *		  an enclave VM.
  *		  The generated unique slot id is an output parameter.
  *		  The ioctl can be invoked on the /dev/nitro_enclaves fd, before
  *		  setting any resources, such as memory and vCPUs, for an
  *		  enclave. Memory and vCPUs are set for the slot mapped to an enclave.
  *		  A NE CPU pool has to be set before calling this function. The
  *		  pool can be set after the NE driver load, using
  *		  /sys/module/nitro_enclaves/parameters/ne_cpus.
  *		  Its format is the detailed in the cpu-lists section:
  *		  https://www.kernel.org/doc/html/latest/admin-guide/kernel-parameters.html
  *		  CPU 0 and its siblings have to remain available for the
  *		  primary / parent VM, so they cannot be set for enclaves. Full
  *		  CPU core(s), from the same NUMA node, need(s) to be included
  *		  in the CPU pool.
  *
  * Context: Process context.
  * Return:
  * * Enclave file descriptor		- Enclave file descriptor used with
  *					  ioctl calls to set vCPUs and memory
  *					  regions, then start the enclave.
  * *  -1				- There was a failure in the ioctl logic.
  * On failure, errno is set to:
  * * EFAULT				- copy_to_user() failure.
  * * ENOMEM				- Memory allocation failure for internal
  *					  bookkeeping variables.
  * * NE_ERR_NO_CPUS_AVAIL_IN_POOL	- No NE CPU pool set / no CPUs available
  *					  in the pool.
  * * Error codes from get_unused_fd_flags() and anon_inode_getfile().
  * * Error codes from the NE PCI device request.
  */
 #define NE_CREATE_VM			_IOR(0xAE, 0x20, __u64)

 /**
  * NE_ADD_VCPU - The command is used to set a vCPU for an enclave. The vCPU can
  *		 be auto-chosen from the NE CPU pool or it can be set by the
  *		 caller, with the note that it needs to be available in the NE
  *		 CPU pool. Full CPU core(s), from the same NUMA node, need(s) to
  *		 be associated with an enclave.
  *		 The vCPU id is an input / output parameter. If its value is 0,
  *		 then a CPU is chosen from the enclave CPU pool and returned via
  *		 this parameter.
  *		 The ioctl can be invoked on the enclave fd, before an enclave
  *		 is started.
  *
  * Context: Process context.
  * Return:
  * * 0					- Logic succesfully completed.
  * *  -1				- There was a failure in the ioctl logic.
  * On failure, errno is set to:
  * * EFAULT				- copy_from_user() / copy_to_user() failure.
  * * ENOMEM				- Memory allocation failure for internal
  *					  bookkeeping variables.
  * * EIO				- Current task mm is not the same as the one
  *					  that created the enclave.
  * * NE_ERR_NO_CPUS_AVAIL_IN_POOL	- No CPUs available in the NE CPU pool.
  * * NE_ERR_VCPU_ALREADY_USED		- The provided vCPU is already used.
  * * NE_ERR_VCPU_NOT_IN_CPU_POOL	- The provided vCPU is not available in the
  *					  NE CPU pool.
  * * NE_ERR_VCPU_INVALID_CPU_CORE	- The core id of the provided vCPU is invalid
  *					  or out of range.
  * * NE_ERR_NOT_IN_INIT_STATE		- The enclave is not in init state
  *					  (init = before being started).
  * * NE_ERR_INVALID_VCPU		- The provided vCPU is not in the available
  *					  CPUs range.
  * * Error codes from the NE PCI device request.
  */
 #define NE_ADD_VCPU			_IOWR(0xAE, 0x21, __u32)

 /**
  * NE_GET_IMAGE_LOAD_INFO - The command is used to get information needed for
  *			    in-memory enclave image loading e.g. offset in
  *			    enclave memory to start placing the enclave image.
  *			    The image load info is an input / output parameter.
  *			    It includes info provided by the caller - flags -
  *			    and returns the offset in enclave memory where to
  *			    start placing the enclave image.
  *			    The ioctl can be invoked on the enclave fd, before
  *			    an enclave is started.
  *
  * Context: Process context.
  * Return:
  * * 0				- Logic succesfully completed.
  * *  -1			- There was a failure in the ioctl logic.
  * On failure, errno is set to:
  * * EFAULT			- copy_from_user() / copy_to_user() failure.
  * * NE_ERR_NOT_IN_INIT_STATE	- The enclave is not in init state (init =
  *				  before being started).
  * * NE_ERR_INVALID_FLAG_VALUE	- The value of the provided flag is invalid.
  */
 #define NE_GET_IMAGE_LOAD_INFO		_IOWR(0xAE, 0x22, struct ne_image_load_info)

 /**
  * NE_SET_USER_MEMORY_REGION - The command is used to set a memory region for an
  *			       enclave, given the allocated memory from the
  *			       userspace. Enclave memory needs to be from the
  *			       same NUMA node as the enclave CPUs.
  *			       The user memory region is an input parameter. It
  *			       includes info provided by the caller - flags,
  *			       memory size and userspace address.
  *			       The ioctl can be invoked on the enclave fd,
  *			       before an enclave is started.
  *
  * Context: Process context.
  * Return:
  * * 0					- Logic succesfully completed.
  * *  -1				- There was a failure in the ioctl logic.
  * On failure, errno is set to:
  * * EFAULT				- copy_from_user() failure.
  * * EINVAL				- Invalid physical memory region(s) e.g.
  *					  unaligned address.
  * * EIO				- Current task mm is not the same as
  *					  the one that created the enclave.
  * * ENOMEM				- Memory allocation failure for internal
  *					  bookkeeping variables.
  * * NE_ERR_NOT_IN_INIT_STATE		- The enclave is not in init state
  *					  (init = before being started).
  * * NE_ERR_INVALID_MEM_REGION_SIZE	- The memory size of the region is not
  *					  multiple of 2 MiB.
  * * NE_ERR_INVALID_MEM_REGION_ADDR	- Invalid user space address given.
  * * NE_ERR_UNALIGNED_MEM_REGION_ADDR	- Unaligned user space address given.
  * * NE_ERR_MEM_REGION_ALREADY_USED	- The memory region is already used.
  * * NE_ERR_MEM_NOT_HUGE_PAGE		- The memory region is not backed by
  *					  huge pages.
  * * NE_ERR_MEM_DIFFERENT_NUMA_NODE	- The memory region is not from the same
  *					  NUMA node as the CPUs.
  * * NE_ERR_MEM_MAX_REGIONS		- The number of memory regions set for
  *					  the enclave reached maximum.
  * * NE_ERR_INVALID_PAGE_SIZE		- The memory region is not backed by
  *					  pages multiple of 2 MiB.
  * * NE_ERR_INVALID_FLAG_VALUE		- The value of the provided flag is invalid.
  * * Error codes from get_user_pages().
  * * Error codes from the NE PCI device request.
  */
 #define NE_SET_USER_MEMORY_REGION	_IOW(0xAE, 0x23, struct ne_user_memory_region)

 /**
  * NE_START_ENCLAVE - The command is used to trigger enclave start after the
  *		      enclave resources, such as memory and CPU, have been set.
  *		      The enclave start info is an input / output parameter. It
  *		      includes info provided by the caller - enclave cid and
  *		      flags - and returns the cid (if input cid is 0).
  *		      The ioctl can be invoked on the enclave fd, after an
  *		      enclave slot is created and resources, such as memory and
  *		      vCPUs are set for an enclave.
  *
  * Context: Process context.
  * Return:
  * * 0					- Logic succesfully completed.
  * *  -1				- There was a failure in the ioctl logic.
  * On failure, errno is set to:
  * * EFAULT				- copy_from_user() / copy_to_user() failure.
  * * NE_ERR_NOT_IN_INIT_STATE		- The enclave is not in init state
  *					  (init = before being started).
  * * NE_ERR_NO_MEM_REGIONS_ADDED	- No memory regions are set.
  * * NE_ERR_NO_VCPUS_ADDED		- No vCPUs are set.
  * *  NE_ERR_FULL_CORES_NOT_USED	- Full core(s) not set for the enclave.
  * * NE_ERR_ENCLAVE_MEM_MIN_SIZE	- Enclave memory is less than minimum
  *					  memory size (64 MiB).
  * * NE_ERR_INVALID_FLAG_VALUE		- The value of the provided flag is invalid.
  * *  NE_ERR_INVALID_ENCLAVE_CID	- The provided enclave CID is invalid.
  * * Error codes from the NE PCI device request.
  */
 #define NE_START_ENCLAVE		_IOWR(0xAE, 0x24, struct ne_enclave_start_info)

 /**
  * DOC: NE specific error codes
  */

 /**
  * NE_ERR_VCPU_ALREADY_USED - The provided vCPU is already used.
  */
 #define NE_ERR_VCPU_ALREADY_USED		(256)
 /**
  * NE_ERR_VCPU_NOT_IN_CPU_POOL - The provided vCPU is not available in the
  *				 NE CPU pool.
  */
 #define NE_ERR_VCPU_NOT_IN_CPU_POOL		(257)
 /**
  * NE_ERR_VCPU_INVALID_CPU_CORE - The core id of the provided vCPU is invalid
  *				  or out of range of the NE CPU pool.
  */
 #define NE_ERR_VCPU_INVALID_CPU_CORE		(258)
 /**
  * NE_ERR_INVALID_MEM_REGION_SIZE - The user space memory region size is not
  *				    multiple of 2 MiB.
  */
 #define NE_ERR_INVALID_MEM_REGION_SIZE		(259)
 /**
  * NE_ERR_INVALID_MEM_REGION_ADDR - The user space memory region address range
  *				    is invalid.
  */
 #define NE_ERR_INVALID_MEM_REGION_ADDR		(260)
 /**
  * NE_ERR_UNALIGNED_MEM_REGION_ADDR - The user space memory region address is
  *				      not aligned.
  */
 #define NE_ERR_UNALIGNED_MEM_REGION_ADDR	(261)
 /**
  * NE_ERR_MEM_REGION_ALREADY_USED - The user space memory region is already used.
  */
 #define NE_ERR_MEM_REGION_ALREADY_USED		(262)
 /**
  * NE_ERR_MEM_NOT_HUGE_PAGE - The user space memory region is not backed by
  *			      contiguous physical huge page(s).
  */
 #define NE_ERR_MEM_NOT_HUGE_PAGE		(263)
 /**
  * NE_ERR_MEM_DIFFERENT_NUMA_NODE - The user space memory region is backed by
  *				    pages from different NUMA nodes than the CPUs.
  */
 #define NE_ERR_MEM_DIFFERENT_NUMA_NODE		(264)
 /**
  * NE_ERR_MEM_MAX_REGIONS - The supported max memory regions per enclaves has
  *			    been reached.
  */
 #define NE_ERR_MEM_MAX_REGIONS			(265)
 /**
  * NE_ERR_NO_MEM_REGIONS_ADDED - The command to start an enclave is triggered
  *				 and no memory regions are added.
  */
 #define NE_ERR_NO_MEM_REGIONS_ADDED		(266)
 /**
  * NE_ERR_NO_VCPUS_ADDED - The command to start an enclave is triggered and no
  *			   vCPUs are added.
  */
 #define NE_ERR_NO_VCPUS_ADDED			(267)
 /**
  * NE_ERR_ENCLAVE_MEM_MIN_SIZE - The enclave memory size is lower than the
  *				 minimum supported.
  */
 #define NE_ERR_ENCLAVE_MEM_MIN_SIZE		(268)
 /**
  * NE_ERR_FULL_CORES_NOT_USED - The command to start an enclave is triggered and
  *				full CPU cores are not set.
  */
 #define NE_ERR_FULL_CORES_NOT_USED		(269)
 /**
  * NE_ERR_NOT_IN_INIT_STATE - The enclave is not in init state when setting
  *			      resources or triggering start.
  */
 #define NE_ERR_NOT_IN_INIT_STATE		(270)
 /**
  * NE_ERR_INVALID_VCPU - The provided vCPU is out of range of the available CPUs.
  */
 #define NE_ERR_INVALID_VCPU			(271)
 /**
  * NE_ERR_NO_CPUS_AVAIL_IN_POOL - The command to create an enclave is triggered
  *				  and no CPUs are available in the pool.
  */
 #define NE_ERR_NO_CPUS_AVAIL_IN_POOL		(272)
 /**
  * NE_ERR_INVALID_PAGE_SIZE - The user space memory region is not backed by pages
  *			      multiple of 2 MiB.
  */
 #define NE_ERR_INVALID_PAGE_SIZE		(273)
 /**
  * NE_ERR_INVALID_FLAG_VALUE - The provided flag value is invalid.
  */
 #define NE_ERR_INVALID_FLAG_VALUE		(274)
 /**
  * NE_ERR_INVALID_ENCLAVE_CID - The provided enclave CID is invalid, either
  *				being a well-known value or the CID of the
  *				parent / primary VM.
  */
 #define NE_ERR_INVALID_ENCLAVE_CID		(275)

 /**
  * DOC: Image load info flags
  */

 /**
  * NE_EIF_IMAGE - Enclave Image Format (EIF)
  */
 #define NE_EIF_IMAGE			(0x01)

 #define NE_IMAGE_LOAD_MAX_FLAG_VAL	(0x02)

 /**
  * struct ne_image_load_info - Info necessary for in-memory enclave image
  *			       loading (in / out).
  * @flags:		Flags to determine the enclave image type
  *			(e.g. Enclave Image Format - EIF) (in).
  * @memory_offset:	Offset in enclave memory where to start placing the
  *			enclave image (out).
  */
 struct ne_image_load_info {
 	__u64	flags;
 	__u64	memory_offset;
 };

 /**
  * DOC: User memory region flags
  */

 /**
  * NE_DEFAULT_MEMORY_REGION - Memory region for enclave general usage.
  */
 #define NE_DEFAULT_MEMORY_REGION	(0x00)

 #define NE_MEMORY_REGION_MAX_FLAG_VAL	(0x01)

 /**
  * struct ne_user_memory_region - Memory region to be set for an enclave (in).
  * @flags:		Flags to determine the usage for the memory region (in).
  * @memory_size:	The size, in bytes, of the memory region to be set for
  *			an enclave (in).
  * @userspace_addr:	The start address of the userspace allocated memory of
  *			the memory region to set for an enclave (in).
  */
 struct ne_user_memory_region {
 	__u64	flags;
 	__u64	memory_size;
 	__u64	userspace_addr;
 };

 /**
  * DOC: Enclave start info flags
  */

 /**
  * NE_ENCLAVE_PRODUCTION_MODE - Start enclave in production mode.
  */
 #define NE_ENCLAVE_PRODUCTION_MODE	(0x00)
 /**
  * NE_ENCLAVE_DEBUG_MODE - Start enclave in debug mode.
  */
 #define NE_ENCLAVE_DEBUG_MODE		(0x01)

 #define NE_ENCLAVE_START_MAX_FLAG_VAL	(0x02)

 /**
  * struct ne_enclave_start_info - Setup info necessary for enclave start (in / out).
  * @flags:		Flags for the enclave to start with (e.g. debug mode) (in).
  * @enclave_cid:	Context ID (CID) for the enclave vsock device. If 0 as
  *			input, the CID is autogenerated by the hypervisor and
  *			returned back as output by the driver (in / out).
  */
 struct ne_enclave_start_info {
 	__u64	flags;
 	__u64	enclave_cid;
 };

 #endif /* _UAPI_LINUX_NITRO_ENCLAVES_H_ */
	/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
	/*
	* Copyright 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
	*/

	#ifndef _UAPI_LINUX_NITRO_ENCLAVES_H_
	#define _UAPI_LINUX_NITRO_ENCLAVES_H_

	#include <linux/types.h>

	/**
	* DOC: Nitro Enclaves (NE) Kernel Driver Interface
	*/

	/**
	* NE_CREATE_VM - The command is used to create a slot that is associated with
	* an enclave VM.
	* The generated unique slot id is an output parameter.
	* The ioctl can be invoked on the /dev/nitro_enclaves fd, before
	* setting any resources, such as memory and vCPUs, for an
	* enclave. Memory and vCPUs are set for the slot mapped to an enclave.
	* A NE CPU pool has to be set before calling this function. The
	* pool can be set after the NE driver load, using
	* /sys/module/nitro_enclaves/parameters/ne_cpus.
	* Its format is the detailed in the cpu-lists section:
	* https://www.kernel.org/doc/html/latest/admin-guide/kernel-parameters.html
	* CPU 0 and its siblings have to remain available for the
	* primary / parent VM, so they cannot be set for enclaves. Full
	* CPU core(s), from the same NUMA node, need(s) to be included
	* in the CPU pool.
	*
	* Context: Process context.
	* Return:
	* * Enclave file descriptor - Enclave file descriptor used with
	* ioctl calls to set vCPUs and memory
	* regions, then start the enclave.
	* * -1 - There was a failure in the ioctl logic.
	* On failure, errno is set to:
	* * EFAULT - copy_to_user() failure.
	* * ENOMEM - Memory allocation failure for internal
	* bookkeeping variables.
	* * NE_ERR_NO_CPUS_AVAIL_IN_POOL - No NE CPU pool set / no CPUs available
	* in the pool.
	* * Error codes from get_unused_fd_flags() and anon_inode_getfile().
	* * Error codes from the NE PCI device request.
	*/
	#define NE_CREATE_VM _IOR(0xAE, 0x20, __u64)

	/**
	* NE_ADD_VCPU - The command is used to set a vCPU for an enclave. The vCPU can
	* be auto-chosen from the NE CPU pool or it can be set by the
	* caller, with the note that it needs to be available in the NE
	* CPU pool. Full CPU core(s), from the same NUMA node, need(s) to
	* be associated with an enclave.
	* The vCPU id is an input / output parameter. If its value is 0,
	* then a CPU is chosen from the enclave CPU pool and returned via
	* this parameter.
	* The ioctl can be invoked on the enclave fd, before an enclave
	* is started.
	*
	* Context: Process context.
	* Return:
	* * 0 - Logic succesfully completed.
	* * -1 - There was a failure in the ioctl logic.
	* On failure, errno is set to:
	* * EFAULT - copy_from_user() / copy_to_user() failure.
	* * ENOMEM - Memory allocation failure for internal
	* bookkeeping variables.
	* * EIO - Current task mm is not the same as the one
	* that created the enclave.
	* * NE_ERR_NO_CPUS_AVAIL_IN_POOL - No CPUs available in the NE CPU pool.
	* * NE_ERR_VCPU_ALREADY_USED - The provided vCPU is already used.
	* * NE_ERR_VCPU_NOT_IN_CPU_POOL - The provided vCPU is not available in the
	* NE CPU pool.
	* * NE_ERR_VCPU_INVALID_CPU_CORE - The core id of the provided vCPU is invalid
	* or out of range.
	* * NE_ERR_NOT_IN_INIT_STATE - The enclave is not in init state
	* (init = before being started).
	* * NE_ERR_INVALID_VCPU - The provided vCPU is not in the available
	* CPUs range.
	* * Error codes from the NE PCI device request.
	*/
	#define NE_ADD_VCPU _IOWR(0xAE, 0x21, __u32)

	/**
	* NE_GET_IMAGE_LOAD_INFO - The command is used to get information needed for
	* in-memory enclave image loading e.g. offset in
	* enclave memory to start placing the enclave image.
	* The image load info is an input / output parameter.
	* It includes info provided by the caller - flags -
	* and returns the offset in enclave memory where to
	* start placing the enclave image.
	* The ioctl can be invoked on the enclave fd, before
	* an enclave is started.
	*
	* Context: Process context.
	* Return:
	* * 0 - Logic succesfully completed.
	* * -1 - There was a failure in the ioctl logic.
	* On failure, errno is set to:
	* * EFAULT - copy_from_user() / copy_to_user() failure.
	* * NE_ERR_NOT_IN_INIT_STATE - The enclave is not in init state (init =
	* before being started).
	* * NE_ERR_INVALID_FLAG_VALUE - The value of the provided flag is invalid.
	*/
	#define NE_GET_IMAGE_LOAD_INFO _IOWR(0xAE, 0x22, struct ne_image_load_info)

	/**
	* NE_SET_USER_MEMORY_REGION - The command is used to set a memory region for an
	* enclave, given the allocated memory from the
	* userspace. Enclave memory needs to be from the
	* same NUMA node as the enclave CPUs.
	* The user memory region is an input parameter. It
	* includes info provided by the caller - flags,
	* memory size and userspace address.
	* The ioctl can be invoked on the enclave fd,
	* before an enclave is started.
	*
	* Context: Process context.
	* Return:
	* * 0 - Logic succesfully completed.
	* * -1 - There was a failure in the ioctl logic.
	* On failure, errno is set to:
	* * EFAULT - copy_from_user() failure.
	* * EINVAL - Invalid physical memory region(s) e.g.
	* unaligned address.
	* * EIO - Current task mm is not the same as
	* the one that created the enclave.
	* * ENOMEM - Memory allocation failure for internal
	* bookkeeping variables.
	* * NE_ERR_NOT_IN_INIT_STATE - The enclave is not in init state
	* (init = before being started).
	* * NE_ERR_INVALID_MEM_REGION_SIZE - The memory size of the region is not
	* multiple of 2 MiB.
	* * NE_ERR_INVALID_MEM_REGION_ADDR - Invalid user space address given.
	* * NE_ERR_UNALIGNED_MEM_REGION_ADDR - Unaligned user space address given.
	* * NE_ERR_MEM_REGION_ALREADY_USED - The memory region is already used.
	* * NE_ERR_MEM_NOT_HUGE_PAGE - The memory region is not backed by
	* huge pages.
	* * NE_ERR_MEM_DIFFERENT_NUMA_NODE - The memory region is not from the same
	* NUMA node as the CPUs.
	* * NE_ERR_MEM_MAX_REGIONS - The number of memory regions set for
	* the enclave reached maximum.
	* * NE_ERR_INVALID_PAGE_SIZE - The memory region is not backed by
	* pages multiple of 2 MiB.
	* * NE_ERR_INVALID_FLAG_VALUE - The value of the provided flag is invalid.
	* * Error codes from get_user_pages().
	* * Error codes from the NE PCI device request.
	*/
	#define NE_SET_USER_MEMORY_REGION _IOW(0xAE, 0x23, struct ne_user_memory_region)

	/**
	* NE_START_ENCLAVE - The command is used to trigger enclave start after the
	* enclave resources, such as memory and CPU, have been set.
	* The enclave start info is an input / output parameter. It
	* includes info provided by the caller - enclave cid and
	* flags - and returns the cid (if input cid is 0).
	* The ioctl can be invoked on the enclave fd, after an
	* enclave slot is created and resources, such as memory and
	* vCPUs are set for an enclave.
	*
	* Context: Process context.
	* Return:
	* * 0 - Logic succesfully completed.
	* * -1 - There was a failure in the ioctl logic.
	* On failure, errno is set to:
	* * EFAULT - copy_from_user() / copy_to_user() failure.
	* * NE_ERR_NOT_IN_INIT_STATE - The enclave is not in init state
	* (init = before being started).
	* * NE_ERR_NO_MEM_REGIONS_ADDED - No memory regions are set.
	* * NE_ERR_NO_VCPUS_ADDED - No vCPUs are set.
	* * NE_ERR_FULL_CORES_NOT_USED - Full core(s) not set for the enclave.
	* * NE_ERR_ENCLAVE_MEM_MIN_SIZE - Enclave memory is less than minimum
	* memory size (64 MiB).
	* * NE_ERR_INVALID_FLAG_VALUE - The value of the provided flag is invalid.
	* * NE_ERR_INVALID_ENCLAVE_CID - The provided enclave CID is invalid.
	* * Error codes from the NE PCI device request.
	*/
	#define NE_START_ENCLAVE _IOWR(0xAE, 0x24, struct ne_enclave_start_info)

	/**
	* DOC: NE specific error codes
	*/

	/**
	* NE_ERR_VCPU_ALREADY_USED - The provided vCPU is already used.
	*/
	#define NE_ERR_VCPU_ALREADY_USED (256)
	/**
	* NE_ERR_VCPU_NOT_IN_CPU_POOL - The provided vCPU is not available in the
	* NE CPU pool.
	*/
	#define NE_ERR_VCPU_NOT_IN_CPU_POOL (257)
	/**
	* NE_ERR_VCPU_INVALID_CPU_CORE - The core id of the provided vCPU is invalid
	* or out of range of the NE CPU pool.
	*/
	#define NE_ERR_VCPU_INVALID_CPU_CORE (258)
	/**
	* NE_ERR_INVALID_MEM_REGION_SIZE - The user space memory region size is not
	* multiple of 2 MiB.
	*/
	#define NE_ERR_INVALID_MEM_REGION_SIZE (259)
	/**
	* NE_ERR_INVALID_MEM_REGION_ADDR - The user space memory region address range
	* is invalid.
	*/
	#define NE_ERR_INVALID_MEM_REGION_ADDR (260)
	/**
	* NE_ERR_UNALIGNED_MEM_REGION_ADDR - The user space memory region address is
	* not aligned.
	*/
	#define NE_ERR_UNALIGNED_MEM_REGION_ADDR (261)
	/**
	* NE_ERR_MEM_REGION_ALREADY_USED - The user space memory region is already used.
	*/
	#define NE_ERR_MEM_REGION_ALREADY_USED (262)
	/**
	* NE_ERR_MEM_NOT_HUGE_PAGE - The user space memory region is not backed by
	* contiguous physical huge page(s).
	*/
	#define NE_ERR_MEM_NOT_HUGE_PAGE (263)
	/**
	* NE_ERR_MEM_DIFFERENT_NUMA_NODE - The user space memory region is backed by
	* pages from different NUMA nodes than the CPUs.
	*/
	#define NE_ERR_MEM_DIFFERENT_NUMA_NODE (264)
	/**
	* NE_ERR_MEM_MAX_REGIONS - The supported max memory regions per enclaves has
	* been reached.
	*/
	#define NE_ERR_MEM_MAX_REGIONS (265)
	/**
	* NE_ERR_NO_MEM_REGIONS_ADDED - The command to start an enclave is triggered
	* and no memory regions are added.
	*/
	#define NE_ERR_NO_MEM_REGIONS_ADDED (266)
	/**
	* NE_ERR_NO_VCPUS_ADDED - The command to start an enclave is triggered and no
	* vCPUs are added.
	*/
	#define NE_ERR_NO_VCPUS_ADDED (267)
	/**
	* NE_ERR_ENCLAVE_MEM_MIN_SIZE - The enclave memory size is lower than the
	* minimum supported.
	*/
	#define NE_ERR_ENCLAVE_MEM_MIN_SIZE (268)
	/**
	* NE_ERR_FULL_CORES_NOT_USED - The command to start an enclave is triggered and
	* full CPU cores are not set.
	*/
	#define NE_ERR_FULL_CORES_NOT_USED (269)
	/**
	* NE_ERR_NOT_IN_INIT_STATE - The enclave is not in init state when setting
	* resources or triggering start.
	*/
	#define NE_ERR_NOT_IN_INIT_STATE (270)
	/**
	* NE_ERR_INVALID_VCPU - The provided vCPU is out of range of the available CPUs.
	*/
	#define NE_ERR_INVALID_VCPU (271)
	/**
	* NE_ERR_NO_CPUS_AVAIL_IN_POOL - The command to create an enclave is triggered
	* and no CPUs are available in the pool.
	*/
	#define NE_ERR_NO_CPUS_AVAIL_IN_POOL (272)
	/**
	* NE_ERR_INVALID_PAGE_SIZE - The user space memory region is not backed by pages
	* multiple of 2 MiB.
	*/
	#define NE_ERR_INVALID_PAGE_SIZE (273)
	/**
	* NE_ERR_INVALID_FLAG_VALUE - The provided flag value is invalid.
	*/
	#define NE_ERR_INVALID_FLAG_VALUE (274)
	/**
	* NE_ERR_INVALID_ENCLAVE_CID - The provided enclave CID is invalid, either
	* being a well-known value or the CID of the
	* parent / primary VM.
	*/
	#define NE_ERR_INVALID_ENCLAVE_CID (275)

	/**
	* DOC: Image load info flags
	*/

	/**
	* NE_EIF_IMAGE - Enclave Image Format (EIF)
	*/
	#define NE_EIF_IMAGE (0x01)

	#define NE_IMAGE_LOAD_MAX_FLAG_VAL (0x02)

	/**
	* struct ne_image_load_info - Info necessary for in-memory enclave image
	* loading (in / out).
	* @flags: Flags to determine the enclave image type
	* (e.g. Enclave Image Format - EIF) (in).
	* @memory_offset: Offset in enclave memory where to start placing the
	* enclave image (out).
	*/
	struct ne_image_load_info {
	__u64 flags;
	__u64 memory_offset;
	};

	/**
	* DOC: User memory region flags
	*/

	/**
	* NE_DEFAULT_MEMORY_REGION - Memory region for enclave general usage.
	*/
	#define NE_DEFAULT_MEMORY_REGION (0x00)

	#define NE_MEMORY_REGION_MAX_FLAG_VAL (0x01)

	/**
	* struct ne_user_memory_region - Memory region to be set for an enclave (in).
	* @flags: Flags to determine the usage for the memory region (in).
	* @memory_size: The size, in bytes, of the memory region to be set for
	* an enclave (in).
	* @userspace_addr: The start address of the userspace allocated memory of
	* the memory region to set for an enclave (in).
	*/
	struct ne_user_memory_region {
	__u64 flags;
	__u64 memory_size;
	__u64 userspace_addr;
	};

	/**
	* DOC: Enclave start info flags
	*/

	/**
	* NE_ENCLAVE_PRODUCTION_MODE - Start enclave in production mode.
	*/
	#define NE_ENCLAVE_PRODUCTION_MODE (0x00)
	/**
	* NE_ENCLAVE_DEBUG_MODE - Start enclave in debug mode.
	*/
	#define NE_ENCLAVE_DEBUG_MODE (0x01)

	#define NE_ENCLAVE_START_MAX_FLAG_VAL (0x02)

	/**
	* struct ne_enclave_start_info - Setup info necessary for enclave start (in / out).
	* @flags: Flags for the enclave to start with (e.g. debug mode) (in).
	* @enclave_cid: Context ID (CID) for the enclave vsock device. If 0 as
	* input, the CID is autogenerated by the hypervisor and
	* returned back as output by the driver (in / out).
	*/
	struct ne_enclave_start_info {
	__u64 flags;
	__u64 enclave_cid;
	};

	#endif /* _UAPI_LINUX_NITRO_ENCLAVES_H_ */