blob: a47b7f35fc80fb45646b2bfa90bbd04822c63ef1 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "exynos4412-midas.dtsi"
/ {
compatible = "samsung,n710x", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
model = "Samsung Galaxy Note 2 (GT-N7100, GT-N7105) based on Exynos4412";
memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x80000000>;
};
/* bootargs are passed in by bootloader */
cam_vdda_reg: voltage-regulator-10 {
compatible = "regulator-fixed";
regulator-name = "CAM_SENSOR_CORE_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
gpio = <&gpm4 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&buck9_reg {
maxim,ena-gpios = <&gpm1 0 GPIO_ACTIVE_HIGH>;
};
&cam_af_reg {
gpio = <&gpm1 1 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&cam_io_reg {
gpio = <&gpm0 7 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&i2c_3 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-slave-addr = <0x10>;
samsung,i2c-max-bus-freq = <400000>;
pinctrl-0 = <&i2c3_bus>;
pinctrl-names = "default";
status = "okay";
mms152-touchscreen@48 {
compatible = "melfas,mms152";
reg = <0x48>;
interrupt-parent = <&gpm2>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
x-size = <720>;
y-size = <1280>;
avdd-supply = <&ldo23_reg>;
vdd-supply = <&ldo24_reg>;
};
};
&ldo13_reg {
regulator-name = "VCC_1.8V_LCD";
regulator-always-on;
};
&ldo25_reg {
regulator-name = "VCI_3.0V_LCD";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
&s5c73m3 {
standby-gpios = <&gpm0 6 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */
vdda-supply = <&cam_vdda_reg>;
status = "okay";
};
&sound {
samsung,audio-routing =
"HP", "HPOUT1L",
"HP", "HPOUT1R",
"SPK", "SPKOUTLN",
"SPK", "SPKOUTLP",
"RCV", "HPOUT2N",
"RCV", "HPOUT2P",
"HDMI", "LINEOUT1N",
"HDMI", "LINEOUT1P",
"LINE", "LINEOUT2N",
"LINE", "LINEOUT2P",
"IN1LP", "MICBIAS2",
"IN1LN", "MICBIAS2",
"Headset Mic", "MICBIAS2",
"IN1RP", "Sub Mic",
"IN1RN", "Sub Mic",
"IN2LP:VXRN", "Main Mic",
"IN2LN", "Main Mic",
"IN2RN", "FM In",
"IN2RP:VXRP", "FM In";
};
&submic_bias_reg {
regulator-always-on;
};
&touchkey_reg {
gpio = <&gpm0 5 GPIO_ACTIVE_HIGH>;
status = "okay";
};