| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * max1619.c - Part of lm_sensors, Linux kernel modules for hardware | |
| * monitoring | |
| * Copyright (C) 2003-2004 Oleksij Rempel <bug-track@fisher-privat.net> | |
| * Jean Delvare <jdelvare@suse.de> | |
| * | |
| * Based on the lm90 driver. The MAX1619 is a sensor chip made by Maxim. | |
| * It reports up to two temperatures (its own plus up to | |
| * one external one). Complete datasheet can be | |
| * obtained from Maxim's website at: | |
| * http://pdfserv.maxim-ic.com/en/ds/MAX1619.pdf | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/slab.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/i2c.h> | |
| #include <linux/hwmon.h> | |
| #include <linux/hwmon-sysfs.h> | |
| #include <linux/err.h> | |
| #include <linux/mutex.h> | |
| #include <linux/sysfs.h> | |
| static const unsigned short normal_i2c[] = { | |
| 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END }; | |
| /* | |
| * The MAX1619 registers | |
| */ | |
| #define MAX1619_REG_R_MAN_ID 0xFE | |
| #define MAX1619_REG_R_CHIP_ID 0xFF | |
| #define MAX1619_REG_R_CONFIG 0x03 | |
| #define MAX1619_REG_W_CONFIG 0x09 | |
| #define MAX1619_REG_R_CONVRATE 0x04 | |
| #define MAX1619_REG_W_CONVRATE 0x0A | |
| #define MAX1619_REG_R_STATUS 0x02 | |
| #define MAX1619_REG_R_LOCAL_TEMP 0x00 | |
| #define MAX1619_REG_R_REMOTE_TEMP 0x01 | |
| #define MAX1619_REG_R_REMOTE_HIGH 0x07 | |
| #define MAX1619_REG_W_REMOTE_HIGH 0x0D | |
| #define MAX1619_REG_R_REMOTE_LOW 0x08 | |
| #define MAX1619_REG_W_REMOTE_LOW 0x0E | |
| #define MAX1619_REG_R_REMOTE_CRIT 0x10 | |
| #define MAX1619_REG_W_REMOTE_CRIT 0x12 | |
| #define MAX1619_REG_R_TCRIT_HYST 0x11 | |
| #define MAX1619_REG_W_TCRIT_HYST 0x13 | |
| /* | |
| * Conversions | |
| */ | |
| static int temp_from_reg(int val) | |
| { | |
| return (val & 0x80 ? val-0x100 : val) * 1000; | |
| } | |
| static int temp_to_reg(int val) | |
| { | |
| return (val < 0 ? val+0x100*1000 : val) / 1000; | |
| } | |
| enum temp_index { | |
| t_input1 = 0, | |
| t_input2, | |
| t_low2, | |
| t_high2, | |
| t_crit2, | |
| t_hyst2, | |
| t_num_regs | |
| }; | |
| /* | |
| * Client data (each client gets its own) | |
| */ | |
| struct max1619_data { | |
| struct i2c_client *client; | |
| struct mutex update_lock; | |
| bool valid; /* false until following fields are valid */ | |
| unsigned long last_updated; /* in jiffies */ | |
| /* registers values */ | |
| u8 temp[t_num_regs]; /* index with enum temp_index */ | |
| u8 alarms; | |
| }; | |
| static const u8 regs_read[t_num_regs] = { | |
| [t_input1] = MAX1619_REG_R_LOCAL_TEMP, | |
| [t_input2] = MAX1619_REG_R_REMOTE_TEMP, | |
| [t_low2] = MAX1619_REG_R_REMOTE_LOW, | |
| [t_high2] = MAX1619_REG_R_REMOTE_HIGH, | |
| [t_crit2] = MAX1619_REG_R_REMOTE_CRIT, | |
| [t_hyst2] = MAX1619_REG_R_TCRIT_HYST, | |
| }; | |
| static const u8 regs_write[t_num_regs] = { | |
| [t_low2] = MAX1619_REG_W_REMOTE_LOW, | |
| [t_high2] = MAX1619_REG_W_REMOTE_HIGH, | |
| [t_crit2] = MAX1619_REG_W_REMOTE_CRIT, | |
| [t_hyst2] = MAX1619_REG_W_TCRIT_HYST, | |
| }; | |
| static struct max1619_data *max1619_update_device(struct device *dev) | |
| { | |
| struct max1619_data *data = dev_get_drvdata(dev); | |
| struct i2c_client *client = data->client; | |
| int config, i; | |
| mutex_lock(&data->update_lock); | |
| if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { | |
| dev_dbg(&client->dev, "Updating max1619 data.\n"); | |
| for (i = 0; i < t_num_regs; i++) | |
| data->temp[i] = i2c_smbus_read_byte_data(client, | |
| regs_read[i]); | |
| data->alarms = i2c_smbus_read_byte_data(client, | |
| MAX1619_REG_R_STATUS); | |
| /* If OVERT polarity is low, reverse alarm bit */ | |
| config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG); | |
| if (!(config & 0x20)) | |
| data->alarms ^= 0x02; | |
| data->last_updated = jiffies; | |
| data->valid = true; | |
| } | |
| mutex_unlock(&data->update_lock); | |
| return data; | |
| } | |
| /* | |
| * Sysfs stuff | |
| */ | |
| static ssize_t temp_show(struct device *dev, struct device_attribute *devattr, | |
| char *buf) | |
| { | |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | |
| struct max1619_data *data = max1619_update_device(dev); | |
| return sprintf(buf, "%d\n", temp_from_reg(data->temp[attr->index])); | |
| } | |
| static ssize_t temp_store(struct device *dev, | |
| struct device_attribute *devattr, const char *buf, | |
| size_t count) | |
| { | |
| struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); | |
| struct max1619_data *data = dev_get_drvdata(dev); | |
| struct i2c_client *client = data->client; | |
| long val; | |
| int err = kstrtol(buf, 10, &val); | |
| if (err) | |
| return err; | |
| mutex_lock(&data->update_lock); | |
| data->temp[attr->index] = temp_to_reg(val); | |
| i2c_smbus_write_byte_data(client, regs_write[attr->index], | |
| data->temp[attr->index]); | |
| mutex_unlock(&data->update_lock); | |
| return count; | |
| } | |
| static ssize_t alarms_show(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct max1619_data *data = max1619_update_device(dev); | |
| return sprintf(buf, "%d\n", data->alarms); | |
| } | |
| static ssize_t alarm_show(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| int bitnr = to_sensor_dev_attr(attr)->index; | |
| struct max1619_data *data = max1619_update_device(dev); | |
| return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1); | |
| } | |
| static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, t_input1); | |
| static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, t_input2); | |
| static SENSOR_DEVICE_ATTR_RW(temp2_min, temp, t_low2); | |
| static SENSOR_DEVICE_ATTR_RW(temp2_max, temp, t_high2); | |
| static SENSOR_DEVICE_ATTR_RW(temp2_crit, temp, t_crit2); | |
| static SENSOR_DEVICE_ATTR_RW(temp2_crit_hyst, temp, t_hyst2); | |
| static DEVICE_ATTR_RO(alarms); | |
| static SENSOR_DEVICE_ATTR_RO(temp2_crit_alarm, alarm, 1); | |
| static SENSOR_DEVICE_ATTR_RO(temp2_fault, alarm, 2); | |
| static SENSOR_DEVICE_ATTR_RO(temp2_min_alarm, alarm, 3); | |
| static SENSOR_DEVICE_ATTR_RO(temp2_max_alarm, alarm, 4); | |
| static struct attribute *max1619_attrs[] = { | |
| &sensor_dev_attr_temp1_input.dev_attr.attr, | |
| &sensor_dev_attr_temp2_input.dev_attr.attr, | |
| &sensor_dev_attr_temp2_min.dev_attr.attr, | |
| &sensor_dev_attr_temp2_max.dev_attr.attr, | |
| &sensor_dev_attr_temp2_crit.dev_attr.attr, | |
| &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr, | |
| &dev_attr_alarms.attr, | |
| &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, | |
| &sensor_dev_attr_temp2_fault.dev_attr.attr, | |
| &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, | |
| &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, | |
| NULL | |
| }; | |
| ATTRIBUTE_GROUPS(max1619); | |
| /* Return 0 if detection is successful, -ENODEV otherwise */ | |
| static int max1619_detect(struct i2c_client *client, | |
| struct i2c_board_info *info) | |
| { | |
| struct i2c_adapter *adapter = client->adapter; | |
| u8 reg_config, reg_convrate, reg_status, man_id, chip_id; | |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | |
| return -ENODEV; | |
| /* detection */ | |
| reg_config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG); | |
| reg_convrate = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONVRATE); | |
| reg_status = i2c_smbus_read_byte_data(client, MAX1619_REG_R_STATUS); | |
| if ((reg_config & 0x03) != 0x00 | |
| || reg_convrate > 0x07 || (reg_status & 0x61) != 0x00) { | |
| dev_dbg(&adapter->dev, "MAX1619 detection failed at 0x%02x\n", | |
| client->addr); | |
| return -ENODEV; | |
| } | |
| /* identification */ | |
| man_id = i2c_smbus_read_byte_data(client, MAX1619_REG_R_MAN_ID); | |
| chip_id = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CHIP_ID); | |
| if (man_id != 0x4D || chip_id != 0x04) { | |
| dev_info(&adapter->dev, | |
| "Unsupported chip (man_id=0x%02X, chip_id=0x%02X).\n", | |
| man_id, chip_id); | |
| return -ENODEV; | |
| } | |
| strscpy(info->type, "max1619", I2C_NAME_SIZE); | |
| return 0; | |
| } | |
| static void max1619_init_client(struct i2c_client *client) | |
| { | |
| u8 config; | |
| /* | |
| * Start the conversions. | |
| */ | |
| i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONVRATE, | |
| 5); /* 2 Hz */ | |
| config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG); | |
| if (config & 0x40) | |
| i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONFIG, | |
| config & 0xBF); /* run */ | |
| } | |
| static int max1619_probe(struct i2c_client *new_client) | |
| { | |
| struct max1619_data *data; | |
| struct device *hwmon_dev; | |
| data = devm_kzalloc(&new_client->dev, sizeof(struct max1619_data), | |
| GFP_KERNEL); | |
| if (!data) | |
| return -ENOMEM; | |
| data->client = new_client; | |
| mutex_init(&data->update_lock); | |
| /* Initialize the MAX1619 chip */ | |
| max1619_init_client(new_client); | |
| hwmon_dev = devm_hwmon_device_register_with_groups(&new_client->dev, | |
| new_client->name, | |
| data, | |
| max1619_groups); | |
| return PTR_ERR_OR_ZERO(hwmon_dev); | |
| } | |
| static const struct i2c_device_id max1619_id[] = { | |
| { "max1619", 0 }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, max1619_id); | |
| #ifdef CONFIG_OF | |
| static const struct of_device_id max1619_of_match[] = { | |
| { .compatible = "maxim,max1619", }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, max1619_of_match); | |
| #endif | |
| static struct i2c_driver max1619_driver = { | |
| .class = I2C_CLASS_HWMON, | |
| .driver = { | |
| .name = "max1619", | |
| .of_match_table = of_match_ptr(max1619_of_match), | |
| }, | |
| .probe = max1619_probe, | |
| .id_table = max1619_id, | |
| .detect = max1619_detect, | |
| .address_list = normal_i2c, | |
| }; | |
| module_i2c_driver(max1619_driver); | |
| MODULE_AUTHOR("Oleksij Rempel <bug-track@fisher-privat.net>, Jean Delvare <jdelvare@suse.de>"); | |
| MODULE_DESCRIPTION("MAX1619 sensor driver"); | |
| MODULE_LICENSE("GPL"); |