include/linux/phylink.h - third_party/kernel - Git at Google

 #ifndef NETDEV_PCS_H
 #define NETDEV_PCS_H

 #include <linux/phy.h>
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>

 struct device_node;
 struct ethtool_cmd;
 struct fwnode_handle;
 struct net_device;

 enum {
 	MLO_PAUSE_NONE,
 	MLO_PAUSE_ASYM = BIT(0),
 	MLO_PAUSE_SYM = BIT(1),
 	MLO_PAUSE_RX = BIT(2),
 	MLO_PAUSE_TX = BIT(3),
 	MLO_PAUSE_TXRX_MASK = MLO_PAUSE_TX | MLO_PAUSE_RX,
 	MLO_PAUSE_AN = BIT(4),

 	MLO_AN_PHY = 0,	/* Conventional PHY */
 	MLO_AN_FIXED,	/* Fixed-link mode */
 	MLO_AN_INBAND,	/* In-band protocol */
 };

 static inline bool phylink_autoneg_inband(unsigned int mode)
 {
 	return mode == MLO_AN_INBAND;
 }

 /**
  * struct phylink_link_state - link state structure
  * @advertising: ethtool bitmask containing advertised link modes
  * @lp_advertising: ethtool bitmask containing link partner advertised link
  *   modes
  * @interface: link &typedef phy_interface_t mode
  * @speed: link speed, one of the SPEED_* constants.
  * @duplex: link duplex mode, one of DUPLEX_* constants.
  * @pause: link pause state, described by MLO_PAUSE_* constants.
  * @link: true if the link is up.
  * @an_enabled: true if autonegotiation is enabled/desired.
  * @an_complete: true if autonegotiation has completed.
  */
 struct phylink_link_state {
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising);
 	phy_interface_t interface;
 	int speed;
 	int duplex;
 	int pause;
 	unsigned int link:1;
 	unsigned int an_enabled:1;
 	unsigned int an_complete:1;
 };

 enum phylink_op_type {
 	PHYLINK_NETDEV = 0,
 	PHYLINK_DEV,
 };

 /**
  * struct phylink_config - PHYLINK configuration structure
  * @dev: a pointer to a struct device associated with the MAC
  * @type: operation type of PHYLINK instance
  */
 struct phylink_config {
 	struct device *dev;
 	enum phylink_op_type type;
 };

 /**
  * struct phylink_mac_ops - MAC operations structure.
  * @validate: Validate and update the link configuration.
  * @mac_link_state: Read the current link state from the hardware.
  * @mac_config: configure the MAC for the selected mode and state.
  * @mac_an_restart: restart 802.3z BaseX autonegotiation.
  * @mac_link_down: take the link down.
  * @mac_link_up: allow the link to come up.
  *
  * The individual methods are described more fully below.
  */
 struct phylink_mac_ops {
 	void (*validate)(struct phylink_config *config,
 			 unsigned long *supported,
 			 struct phylink_link_state *state);
 	int (*mac_link_state)(struct phylink_config *config,
 			      struct phylink_link_state *state);
 	void (*mac_config)(struct phylink_config *config, unsigned int mode,
 			   const struct phylink_link_state *state);
 	void (*mac_an_restart)(struct phylink_config *config);
 	void (*mac_link_down)(struct phylink_config *config, unsigned int mode,
 			      phy_interface_t interface);
 	void (*mac_link_up)(struct phylink_config *config, unsigned int mode,
 			    phy_interface_t interface,
 			    struct phy_device *phy);
 };

 #if 0 /* For kernel-doc purposes only. */
 /**
  * validate - Validate and update the link configuration
  * @config: a pointer to a &struct phylink_config.
  * @supported: ethtool bitmask for supported link modes.
  * @state: a pointer to a &struct phylink_link_state.
  *
  * Clear bits in the @supported and @state->advertising masks that
  * are not supportable by the MAC.
  *
  * Note that the PHY may be able to transform from one connection
  * technology to another, so, eg, don't clear 1000BaseX just
  * because the MAC is unable to BaseX mode. This is more about
  * clearing unsupported speeds and duplex settings. The port modes
  * should not be cleared; phylink_set_port_modes() will help with this.
  *
  * If the @state->interface mode is %PHY_INTERFACE_MODE_1000BASEX
  * or %PHY_INTERFACE_MODE_2500BASEX, select the appropriate mode
  * based on @state->advertising and/or @state->speed and update
  * @state->interface accordingly. See phylink_helper_basex_speed().
  *
  * When @state->interface is %PHY_INTERFACE_MODE_NA, phylink expects the
  * MAC driver to return all supported link modes.
  *
  * If the @state->interface mode is not supported, then the @supported
  * mask must be cleared.
  */
 void validate(struct phylink_config *config, unsigned long *supported,
 	      struct phylink_link_state *state);

 /**
  * mac_link_state() - Read the current link state from the hardware
  * @config: a pointer to a &struct phylink_config.
  * @state: a pointer to a &struct phylink_link_state.
  *
  * Read the current link state from the MAC, reporting the current
  * speed in @state->speed, duplex mode in @state->duplex, pause mode
  * in @state->pause using the %MLO_PAUSE_RX and %MLO_PAUSE_TX bits,
  * negotiation completion state in @state->an_complete, and link
  * up state in @state->link.
  */
 int mac_link_state(struct phylink_config *config,
 		   struct phylink_link_state *state);

 /**
  * mac_config() - configure the MAC for the selected mode and state
  * @config: a pointer to a &struct phylink_config.
  * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND.
  * @state: a pointer to a &struct phylink_link_state.
  *
  * Note - not all members of @state are valid.  In particular,
  * @state->lp_advertising, @state->link, @state->an_complete are never
  * guaranteed to be correct, and so any mac_config() implementation must
  * never reference these fields.
  *
  * The action performed depends on the currently selected mode:
  *
  * %MLO_AN_FIXED, %MLO_AN_PHY:
  *   Configure the specified @state->speed, @state->duplex and
  *   @state->pause (%MLO_PAUSE_TX / %MLO_PAUSE_RX) modes over a link
  *   specified by @state->interface.  @state->advertising may be used,
  *   but is not required.  Other members of @state must be ignored.
  *
  *   Valid state members: interface, speed, duplex, pause, advertising.
  *
  * %MLO_AN_INBAND:
  *   place the link in an inband negotiation mode (such as 802.3z
  *   1000base-X or Cisco SGMII mode depending on the @state->interface
  *   mode). In both cases, link state management (whether the link
  *   is up or not) is performed by the MAC, and reported via the
  *   mac_link_state() callback. Changes in link state must be made
  *   by calling phylink_mac_change().
  *
  *   If in 802.3z mode, the link speed is fixed, dependent on the
  *   @state->interface. Duplex is negotiated, and pause is advertised
  *   according to @state->an_enabled, @state->pause and
  *   @state->advertising flags. Beware of MACs which only support full
  *   duplex at gigabit and higher speeds.
  *
  *   If in Cisco SGMII mode, the link speed and duplex mode are passed
  *   in the serial bitstream 16-bit configuration word, and the MAC
  *   should be configured to read these bits and acknowledge the
  *   configuration word. Nothing is advertised by the MAC. The MAC is
  *   responsible for reading the configuration word and configuring
  *   itself accordingly.
  *
  *   Valid state members: interface, an_enabled, pause, advertising.
  *
  * Implementations are expected to update the MAC to reflect the
  * requested settings - i.o.w., if nothing has changed between two
  * calls, no action is expected.  If only flow control settings have
  * changed, flow control should be updated *without* taking the link
  * down.  This "update" behaviour is critical to avoid bouncing the
  * link up status.
  */
 void mac_config(struct phylink_config *config, unsigned int mode,
 		const struct phylink_link_state *state);

 /**
  * mac_an_restart() - restart 802.3z BaseX autonegotiation
  * @config: a pointer to a &struct phylink_config.
  */
 void mac_an_restart(struct phylink_config *config);

 /**
  * mac_link_down() - take the link down
  * @config: a pointer to a &struct phylink_config.
  * @mode: link autonegotiation mode
  * @interface: link &typedef phy_interface_t mode
  *
  * If @mode is not an in-band negotiation mode (as defined by
  * phylink_autoneg_inband()), force the link down and disable any
  * Energy Efficient Ethernet MAC configuration. Interface type
  * selection must be done in mac_config().
  */
 void mac_link_down(struct phylink_config *config, unsigned int mode,
 		   phy_interface_t interface);

 /**
  * mac_link_up() - allow the link to come up
  * @config: a pointer to a &struct phylink_config.
  * @mode: link autonegotiation mode
  * @interface: link &typedef phy_interface_t mode
  * @phy: any attached phy
  *
  * If @mode is not an in-band negotiation mode (as defined by
  * phylink_autoneg_inband()), allow the link to come up. If @phy
  * is non-%NULL, configure Energy Efficient Ethernet by calling
  * phy_init_eee() and perform appropriate MAC configuration for EEE.
  * Interface type selection must be done in mac_config().
  */
 void mac_link_up(struct phylink_config *config, unsigned int mode,
 		 phy_interface_t interface,
 		 struct phy_device *phy);
 #endif

 struct phylink *phylink_create(struct phylink_config *, struct fwnode_handle *,
 			       phy_interface_t iface,
 			       const struct phylink_mac_ops *ops);
 void phylink_destroy(struct phylink *);

 int phylink_connect_phy(struct phylink *, struct phy_device *);
 int phylink_of_phy_connect(struct phylink *, struct device_node *, u32 flags);
 void phylink_disconnect_phy(struct phylink *);
 int phylink_fixed_state_cb(struct phylink *,
 			   void (*cb)(struct net_device *dev,
 				      struct phylink_link_state *));

 void phylink_mac_change(struct phylink *, bool up);

 void phylink_start(struct phylink *);
 void phylink_stop(struct phylink *);

 void phylink_ethtool_get_wol(struct phylink *, struct ethtool_wolinfo *);
 int phylink_ethtool_set_wol(struct phylink *, struct ethtool_wolinfo *);

 int phylink_ethtool_ksettings_get(struct phylink *,
 				  struct ethtool_link_ksettings *);
 int phylink_ethtool_ksettings_set(struct phylink *,
 				  const struct ethtool_link_ksettings *);
 int phylink_ethtool_nway_reset(struct phylink *);
 void phylink_ethtool_get_pauseparam(struct phylink *,
 				    struct ethtool_pauseparam *);
 int phylink_ethtool_set_pauseparam(struct phylink *,
 				   struct ethtool_pauseparam *);
 int phylink_get_eee_err(struct phylink *);
 int phylink_init_eee(struct phylink *, bool);
 int phylink_ethtool_get_eee(struct phylink *, struct ethtool_eee *);
 int phylink_ethtool_set_eee(struct phylink *, struct ethtool_eee *);
 int phylink_mii_ioctl(struct phylink *, struct ifreq *, int);

 #define phylink_zero(bm) \
 	bitmap_zero(bm, __ETHTOOL_LINK_MODE_MASK_NBITS)
 #define __phylink_do_bit(op, bm, mode) \
 	op(ETHTOOL_LINK_MODE_ ## mode ## _BIT, bm)

 #define phylink_set(bm, mode)	__phylink_do_bit(__set_bit, bm, mode)
 #define phylink_clear(bm, mode)	__phylink_do_bit(__clear_bit, bm, mode)
 #define phylink_test(bm, mode)	__phylink_do_bit(test_bit, bm, mode)

 void phylink_set_port_modes(unsigned long *bits);
 void phylink_helper_basex_speed(struct phylink_link_state *state);

 #endif
	#ifndef NETDEV_PCS_H
	#define NETDEV_PCS_H

	#include <linux/phy.h>
	#include <linux/spinlock.h>
	#include <linux/workqueue.h>

	struct device_node;
	struct ethtool_cmd;
	struct fwnode_handle;
	struct net_device;

	enum {
	MLO_PAUSE_NONE,
	MLO_PAUSE_ASYM = BIT(0),
	MLO_PAUSE_SYM = BIT(1),
	MLO_PAUSE_RX = BIT(2),
	MLO_PAUSE_TX = BIT(3),
	MLO_PAUSE_TXRX_MASK = MLO_PAUSE_TX \| MLO_PAUSE_RX,
	MLO_PAUSE_AN = BIT(4),

	MLO_AN_PHY = 0, /* Conventional PHY */
	MLO_AN_FIXED, /* Fixed-link mode */
	MLO_AN_INBAND, /* In-band protocol */
	};

	static inline bool phylink_autoneg_inband(unsigned int mode)
	{
	return mode == MLO_AN_INBAND;
	}

	/**
	* struct phylink_link_state - link state structure
	* @advertising: ethtool bitmask containing advertised link modes
	* @lp_advertising: ethtool bitmask containing link partner advertised link
	* modes
	* @interface: link &typedef phy_interface_t mode
	* @speed: link speed, one of the SPEED_* constants.
	* @duplex: link duplex mode, one of DUPLEX_* constants.
	* @pause: link pause state, described by MLO_PAUSE_* constants.
	* @link: true if the link is up.
	* @an_enabled: true if autonegotiation is enabled/desired.
	* @an_complete: true if autonegotiation has completed.
	*/
	struct phylink_link_state {
	__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
	__ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising);
	phy_interface_t interface;
	int speed;
	int duplex;
	int pause;
	unsigned int link:1;
	unsigned int an_enabled:1;
	unsigned int an_complete:1;
	};

	enum phylink_op_type {
	PHYLINK_NETDEV = 0,
	PHYLINK_DEV,
	};

	/**
	* struct phylink_config - PHYLINK configuration structure
	* @dev: a pointer to a struct device associated with the MAC
	* @type: operation type of PHYLINK instance
	*/
	struct phylink_config {
	struct device *dev;
	enum phylink_op_type type;
	};

	/**
	* struct phylink_mac_ops - MAC operations structure.
	* @validate: Validate and update the link configuration.
	* @mac_link_state: Read the current link state from the hardware.
	* @mac_config: configure the MAC for the selected mode and state.
	* @mac_an_restart: restart 802.3z BaseX autonegotiation.
	* @mac_link_down: take the link down.
	* @mac_link_up: allow the link to come up.
	*
	* The individual methods are described more fully below.
	*/
	struct phylink_mac_ops {
	void (validate)(struct phylink_config config,
	unsigned long *supported,
	struct phylink_link_state *state);
	int (mac_link_state)(struct phylink_config config,
	struct phylink_link_state *state);
	void (mac_config)(struct phylink_config config, unsigned int mode,
	const struct phylink_link_state *state);
	void (mac_an_restart)(struct phylink_config config);
	void (mac_link_down)(struct phylink_config config, unsigned int mode,
	phy_interface_t interface);
	void (mac_link_up)(struct phylink_config config, unsigned int mode,
	phy_interface_t interface,
	struct phy_device *phy);
	};

	#if 0 /* For kernel-doc purposes only. */
	/**
	* validate - Validate and update the link configuration
	* @config: a pointer to a &struct phylink_config.
	* @supported: ethtool bitmask for supported link modes.
	* @state: a pointer to a &struct phylink_link_state.
	*
	* Clear bits in the @supported and @state->advertising masks that
	* are not supportable by the MAC.
	*
	* Note that the PHY may be able to transform from one connection
	* technology to another, so, eg, don't clear 1000BaseX just
	* because the MAC is unable to BaseX mode. This is more about
	* clearing unsupported speeds and duplex settings. The port modes
	* should not be cleared; phylink_set_port_modes() will help with this.
	*
	* If the @state->interface mode is %PHY_INTERFACE_MODE_1000BASEX
	* or %PHY_INTERFACE_MODE_2500BASEX, select the appropriate mode
	* based on @state->advertising and/or @state->speed and update
	* @state->interface accordingly. See phylink_helper_basex_speed().
	*
	* When @state->interface is %PHY_INTERFACE_MODE_NA, phylink expects the
	* MAC driver to return all supported link modes.
	*
	* If the @state->interface mode is not supported, then the @supported
	* mask must be cleared.
	*/
	void validate(struct phylink_config config, unsigned long supported,
	struct phylink_link_state *state);

	/**
	* mac_link_state() - Read the current link state from the hardware
	* @config: a pointer to a &struct phylink_config.
	* @state: a pointer to a &struct phylink_link_state.
	*
	* Read the current link state from the MAC, reporting the current
	* speed in @state->speed, duplex mode in @state->duplex, pause mode
	* in @state->pause using the %MLO_PAUSE_RX and %MLO_PAUSE_TX bits,
	* negotiation completion state in @state->an_complete, and link
	* up state in @state->link.
	*/
	int mac_link_state(struct phylink_config *config,
	struct phylink_link_state *state);

	/**
	* mac_config() - configure the MAC for the selected mode and state
	* @config: a pointer to a &struct phylink_config.
	* @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND.
	* @state: a pointer to a &struct phylink_link_state.
	*
	* Note - not all members of @state are valid. In particular,
	* @state->lp_advertising, @state->link, @state->an_complete are never
	* guaranteed to be correct, and so any mac_config() implementation must
	* never reference these fields.
	*
	* The action performed depends on the currently selected mode:
	*
	* %MLO_AN_FIXED, %MLO_AN_PHY:
	* Configure the specified @state->speed, @state->duplex and
	* @state->pause (%MLO_PAUSE_TX / %MLO_PAUSE_RX) modes over a link
	* specified by @state->interface. @state->advertising may be used,
	* but is not required. Other members of @state must be ignored.
	*
	* Valid state members: interface, speed, duplex, pause, advertising.
	*
	* %MLO_AN_INBAND:
	* place the link in an inband negotiation mode (such as 802.3z
	* 1000base-X or Cisco SGMII mode depending on the @state->interface
	* mode). In both cases, link state management (whether the link
	* is up or not) is performed by the MAC, and reported via the
	* mac_link_state() callback. Changes in link state must be made
	* by calling phylink_mac_change().
	*
	* If in 802.3z mode, the link speed is fixed, dependent on the
	* @state->interface. Duplex is negotiated, and pause is advertised
	* according to @state->an_enabled, @state->pause and
	* @state->advertising flags. Beware of MACs which only support full
	* duplex at gigabit and higher speeds.
	*
	* If in Cisco SGMII mode, the link speed and duplex mode are passed
	* in the serial bitstream 16-bit configuration word, and the MAC
	* should be configured to read these bits and acknowledge the
	* configuration word. Nothing is advertised by the MAC. The MAC is
	* responsible for reading the configuration word and configuring
	* itself accordingly.
	*
	* Valid state members: interface, an_enabled, pause, advertising.
	*
	* Implementations are expected to update the MAC to reflect the
	* requested settings - i.o.w., if nothing has changed between two
	* calls, no action is expected. If only flow control settings have
	* changed, flow control should be updated without taking the link
	* down. This "update" behaviour is critical to avoid bouncing the
	* link up status.
	*/
	void mac_config(struct phylink_config *config, unsigned int mode,
	const struct phylink_link_state *state);

	/**
	* mac_an_restart() - restart 802.3z BaseX autonegotiation
	* @config: a pointer to a &struct phylink_config.
	*/
	void mac_an_restart(struct phylink_config *config);

	/**
	* mac_link_down() - take the link down
	* @config: a pointer to a &struct phylink_config.
	* @mode: link autonegotiation mode
	* @interface: link &typedef phy_interface_t mode
	*
	* If @mode is not an in-band negotiation mode (as defined by
	* phylink_autoneg_inband()), force the link down and disable any
	* Energy Efficient Ethernet MAC configuration. Interface type
	* selection must be done in mac_config().
	*/
	void mac_link_down(struct phylink_config *config, unsigned int mode,
	phy_interface_t interface);

	/**
	* mac_link_up() - allow the link to come up
	* @config: a pointer to a &struct phylink_config.
	* @mode: link autonegotiation mode
	* @interface: link &typedef phy_interface_t mode
	* @phy: any attached phy
	*
	* If @mode is not an in-band negotiation mode (as defined by
	* phylink_autoneg_inband()), allow the link to come up. If @phy
	* is non-%NULL, configure Energy Efficient Ethernet by calling
	* phy_init_eee() and perform appropriate MAC configuration for EEE.
	* Interface type selection must be done in mac_config().
	*/
	void mac_link_up(struct phylink_config *config, unsigned int mode,
	phy_interface_t interface,
	struct phy_device *phy);
	#endif

	struct phylink phylink_create(struct phylink_config , struct fwnode_handle *,
	phy_interface_t iface,
	const struct phylink_mac_ops *ops);
	void phylink_destroy(struct phylink *);

	int phylink_connect_phy(struct phylink , struct phy_device );
	int phylink_of_phy_connect(struct phylink , struct device_node , u32 flags);
	void phylink_disconnect_phy(struct phylink *);
	int phylink_fixed_state_cb(struct phylink *,
	void (cb)(struct net_device dev,
	struct phylink_link_state *));

	void phylink_mac_change(struct phylink *, bool up);

	void phylink_start(struct phylink *);
	void phylink_stop(struct phylink *);

	void phylink_ethtool_get_wol(struct phylink , struct ethtool_wolinfo );
	int phylink_ethtool_set_wol(struct phylink , struct ethtool_wolinfo );

	int phylink_ethtool_ksettings_get(struct phylink *,
	struct ethtool_link_ksettings *);
	int phylink_ethtool_ksettings_set(struct phylink *,
	const struct ethtool_link_ksettings *);
	int phylink_ethtool_nway_reset(struct phylink *);
	void phylink_ethtool_get_pauseparam(struct phylink *,
	struct ethtool_pauseparam *);
	int phylink_ethtool_set_pauseparam(struct phylink *,
	struct ethtool_pauseparam *);
	int phylink_get_eee_err(struct phylink *);
	int phylink_init_eee(struct phylink *, bool);
	int phylink_ethtool_get_eee(struct phylink , struct ethtool_eee );
	int phylink_ethtool_set_eee(struct phylink , struct ethtool_eee );
	int phylink_mii_ioctl(struct phylink , struct ifreq , int);

	#define phylink_zero(bm) \
	bitmap_zero(bm, __ETHTOOL_LINK_MODE_MASK_NBITS)
	#define __phylink_do_bit(op, bm, mode) \
	op(ETHTOOL_LINK_MODE_ ## mode ## _BIT, bm)

	#define phylink_set(bm, mode) __phylink_do_bit(__set_bit, bm, mode)
	#define phylink_clear(bm, mode) __phylink_do_bit(__clear_bit, bm, mode)
	#define phylink_test(bm, mode) __phylink_do_bit(test_bit, bm, mode)

	void phylink_set_port_modes(unsigned long *bits);
	void phylink_helper_basex_speed(struct phylink_link_state *state);

	#endif