| // SPDX-License-Identifier: GPL-2.0-or-later | 
 | /* | 
 |  * Freescale MPC85xx/MPC86xx RapidIO support | 
 |  * | 
 |  * Copyright 2009 Sysgo AG | 
 |  * Thomas Moll <thomas.moll@sysgo.com> | 
 |  * - fixed maintenance access routines, check for aligned access | 
 |  * | 
 |  * Copyright 2009 Integrated Device Technology, Inc. | 
 |  * Alex Bounine <alexandre.bounine@idt.com> | 
 |  * - Added Port-Write message handling | 
 |  * - Added Machine Check exception handling | 
 |  * | 
 |  * Copyright (C) 2007, 2008, 2010, 2011 Freescale Semiconductor, Inc. | 
 |  * Zhang Wei <wei.zhang@freescale.com> | 
 |  * | 
 |  * Copyright 2005 MontaVista Software, Inc. | 
 |  * Matt Porter <mporter@kernel.crashing.org> | 
 |  */ | 
 |  | 
 | #include <linux/init.h> | 
 | #include <linux/extable.h> | 
 | #include <linux/types.h> | 
 | #include <linux/dma-mapping.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/device.h> | 
 | #include <linux/of_address.h> | 
 | #include <linux/of_irq.h> | 
 | #include <linux/of_platform.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/slab.h> | 
 |  | 
 | #include <linux/io.h> | 
 | #include <linux/uaccess.h> | 
 | #include <asm/machdep.h> | 
 |  | 
 | #include "fsl_rio.h" | 
 |  | 
 | #undef DEBUG_PW	/* Port-Write debugging */ | 
 |  | 
 | #define RIO_PORT1_EDCSR		0x0640 | 
 | #define RIO_PORT2_EDCSR		0x0680 | 
 | #define RIO_PORT1_IECSR		0x10130 | 
 | #define RIO_PORT2_IECSR		0x101B0 | 
 |  | 
 | #define RIO_GCCSR		0x13c | 
 | #define RIO_ESCSR		0x158 | 
 | #define ESCSR_CLEAR		0x07120204 | 
 | #define RIO_PORT2_ESCSR		0x178 | 
 | #define RIO_CCSR		0x15c | 
 | #define RIO_LTLEDCSR_IER	0x80000000 | 
 | #define RIO_LTLEDCSR_PRT	0x01000000 | 
 | #define IECSR_CLEAR		0x80000000 | 
 | #define RIO_ISR_AACR		0x10120 | 
 | #define RIO_ISR_AACR_AA		0x1	/* Accept All ID */ | 
 |  | 
 | #define RIWTAR_TRAD_VAL_SHIFT	12 | 
 | #define RIWTAR_TRAD_MASK	0x00FFFFFF | 
 | #define RIWBAR_BADD_VAL_SHIFT	12 | 
 | #define RIWBAR_BADD_MASK	0x003FFFFF | 
 | #define RIWAR_ENABLE		0x80000000 | 
 | #define RIWAR_TGINT_LOCAL	0x00F00000 | 
 | #define RIWAR_RDTYP_NO_SNOOP	0x00040000 | 
 | #define RIWAR_RDTYP_SNOOP	0x00050000 | 
 | #define RIWAR_WRTYP_NO_SNOOP	0x00004000 | 
 | #define RIWAR_WRTYP_SNOOP	0x00005000 | 
 | #define RIWAR_WRTYP_ALLOC	0x00006000 | 
 | #define RIWAR_SIZE_MASK		0x0000003F | 
 |  | 
 | static DEFINE_SPINLOCK(fsl_rio_config_lock); | 
 |  | 
 | #define __fsl_read_rio_config(x, addr, err, op)		\ | 
 | 	__asm__ __volatile__(				\ | 
 | 		"1:	"op" %1,0(%2)\n"		\ | 
 | 		"	eieio\n"			\ | 
 | 		"2:\n"					\ | 
 | 		".section .fixup,\"ax\"\n"		\ | 
 | 		"3:	li %1,-1\n"			\ | 
 | 		"	li %0,%3\n"			\ | 
 | 		"	b 2b\n"				\ | 
 | 		".previous\n"				\ | 
 | 		EX_TABLE(1b, 3b)			\ | 
 | 		: "=r" (err), "=r" (x)			\ | 
 | 		: "b" (addr), "i" (-EFAULT), "0" (err)) | 
 |  | 
 | void __iomem *rio_regs_win; | 
 | void __iomem *rmu_regs_win; | 
 | resource_size_t rio_law_start; | 
 |  | 
 | struct fsl_rio_dbell *dbell; | 
 | struct fsl_rio_pw *pw; | 
 |  | 
 | #ifdef CONFIG_E500 | 
 | int fsl_rio_mcheck_exception(struct pt_regs *regs) | 
 | { | 
 | 	const struct exception_table_entry *entry; | 
 | 	unsigned long reason; | 
 |  | 
 | 	if (!rio_regs_win) | 
 | 		return 0; | 
 |  | 
 | 	reason = in_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR)); | 
 | 	if (reason & (RIO_LTLEDCSR_IER | RIO_LTLEDCSR_PRT)) { | 
 | 		/* Check if we are prepared to handle this fault */ | 
 | 		entry = search_exception_tables(regs->nip); | 
 | 		if (entry) { | 
 | 			pr_debug("RIO: %s - MC Exception handled\n", | 
 | 				 __func__); | 
 | 			out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), | 
 | 				 0); | 
 | 			regs_set_recoverable(regs); | 
 | 			regs_set_return_ip(regs, extable_fixup(entry)); | 
 | 			return 1; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL_GPL(fsl_rio_mcheck_exception); | 
 | #endif | 
 |  | 
 | /** | 
 |  * fsl_local_config_read - Generate a MPC85xx local config space read | 
 |  * @mport: RapidIO master port info | 
 |  * @index: ID of RapdiIO interface | 
 |  * @offset: Offset into configuration space | 
 |  * @len: Length (in bytes) of the maintenance transaction | 
 |  * @data: Value to be read into | 
 |  * | 
 |  * Generates a MPC85xx local configuration space read. Returns %0 on | 
 |  * success or %-EINVAL on failure. | 
 |  */ | 
 | static int fsl_local_config_read(struct rio_mport *mport, | 
 | 				int index, u32 offset, int len, u32 *data) | 
 | { | 
 | 	struct rio_priv *priv = mport->priv; | 
 | 	pr_debug("fsl_local_config_read: index %d offset %8.8x\n", index, | 
 | 		 offset); | 
 | 	*data = in_be32(priv->regs_win + offset); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * fsl_local_config_write - Generate a MPC85xx local config space write | 
 |  * @mport: RapidIO master port info | 
 |  * @index: ID of RapdiIO interface | 
 |  * @offset: Offset into configuration space | 
 |  * @len: Length (in bytes) of the maintenance transaction | 
 |  * @data: Value to be written | 
 |  * | 
 |  * Generates a MPC85xx local configuration space write. Returns %0 on | 
 |  * success or %-EINVAL on failure. | 
 |  */ | 
 | static int fsl_local_config_write(struct rio_mport *mport, | 
 | 				int index, u32 offset, int len, u32 data) | 
 | { | 
 | 	struct rio_priv *priv = mport->priv; | 
 | 	pr_debug | 
 | 		("fsl_local_config_write: index %d offset %8.8x data %8.8x\n", | 
 | 		index, offset, data); | 
 | 	out_be32(priv->regs_win + offset, data); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * fsl_rio_config_read - Generate a MPC85xx read maintenance transaction | 
 |  * @mport: RapidIO master port info | 
 |  * @index: ID of RapdiIO interface | 
 |  * @destid: Destination ID of transaction | 
 |  * @hopcount: Number of hops to target device | 
 |  * @offset: Offset into configuration space | 
 |  * @len: Length (in bytes) of the maintenance transaction | 
 |  * @val: Location to be read into | 
 |  * | 
 |  * Generates a MPC85xx read maintenance transaction. Returns %0 on | 
 |  * success or %-EINVAL on failure. | 
 |  */ | 
 | static int | 
 | fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid, | 
 | 			u8 hopcount, u32 offset, int len, u32 *val) | 
 | { | 
 | 	struct rio_priv *priv = mport->priv; | 
 | 	unsigned long flags; | 
 | 	u8 *data; | 
 | 	u32 rval, err = 0; | 
 |  | 
 | 	pr_debug | 
 | 		("fsl_rio_config_read:" | 
 | 		" index %d destid %d hopcount %d offset %8.8x len %d\n", | 
 | 		index, destid, hopcount, offset, len); | 
 |  | 
 | 	/* 16MB maintenance window possible */ | 
 | 	/* allow only aligned access to maintenance registers */ | 
 | 	if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	spin_lock_irqsave(&fsl_rio_config_lock, flags); | 
 |  | 
 | 	out_be32(&priv->maint_atmu_regs->rowtar, | 
 | 		 (destid << 22) | (hopcount << 12) | (offset >> 12)); | 
 | 	out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10)); | 
 |  | 
 | 	data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1)); | 
 | 	switch (len) { | 
 | 	case 1: | 
 | 		__fsl_read_rio_config(rval, data, err, "lbz"); | 
 | 		break; | 
 | 	case 2: | 
 | 		__fsl_read_rio_config(rval, data, err, "lhz"); | 
 | 		break; | 
 | 	case 4: | 
 | 		__fsl_read_rio_config(rval, data, err, "lwz"); | 
 | 		break; | 
 | 	default: | 
 | 		spin_unlock_irqrestore(&fsl_rio_config_lock, flags); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (err) { | 
 | 		pr_debug("RIO: cfg_read error %d for %x:%x:%x\n", | 
 | 			 err, destid, hopcount, offset); | 
 | 	} | 
 |  | 
 | 	spin_unlock_irqrestore(&fsl_rio_config_lock, flags); | 
 | 	*val = rval; | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | /** | 
 |  * fsl_rio_config_write - Generate a MPC85xx write maintenance transaction | 
 |  * @mport: RapidIO master port info | 
 |  * @index: ID of RapdiIO interface | 
 |  * @destid: Destination ID of transaction | 
 |  * @hopcount: Number of hops to target device | 
 |  * @offset: Offset into configuration space | 
 |  * @len: Length (in bytes) of the maintenance transaction | 
 |  * @val: Value to be written | 
 |  * | 
 |  * Generates an MPC85xx write maintenance transaction. Returns %0 on | 
 |  * success or %-EINVAL on failure. | 
 |  */ | 
 | static int | 
 | fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid, | 
 | 			u8 hopcount, u32 offset, int len, u32 val) | 
 | { | 
 | 	struct rio_priv *priv = mport->priv; | 
 | 	unsigned long flags; | 
 | 	u8 *data; | 
 | 	int ret = 0; | 
 |  | 
 | 	pr_debug | 
 | 		("fsl_rio_config_write:" | 
 | 		" index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n", | 
 | 		index, destid, hopcount, offset, len, val); | 
 |  | 
 | 	/* 16MB maintenance windows possible */ | 
 | 	/* allow only aligned access to maintenance registers */ | 
 | 	if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	spin_lock_irqsave(&fsl_rio_config_lock, flags); | 
 |  | 
 | 	out_be32(&priv->maint_atmu_regs->rowtar, | 
 | 		 (destid << 22) | (hopcount << 12) | (offset >> 12)); | 
 | 	out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10)); | 
 |  | 
 | 	data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1)); | 
 | 	switch (len) { | 
 | 	case 1: | 
 | 		out_8((u8 *) data, val); | 
 | 		break; | 
 | 	case 2: | 
 | 		out_be16((u16 *) data, val); | 
 | 		break; | 
 | 	case 4: | 
 | 		out_be32((u32 *) data, val); | 
 | 		break; | 
 | 	default: | 
 | 		ret = -EINVAL; | 
 | 	} | 
 | 	spin_unlock_irqrestore(&fsl_rio_config_lock, flags); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void fsl_rio_inbound_mem_init(struct rio_priv *priv) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	/* close inbound windows */ | 
 | 	for (i = 0; i < RIO_INB_ATMU_COUNT; i++) | 
 | 		out_be32(&priv->inb_atmu_regs[i].riwar, 0); | 
 | } | 
 |  | 
 | int fsl_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart, | 
 | 	u64 rstart, u64 size, u32 flags) | 
 | { | 
 | 	struct rio_priv *priv = mport->priv; | 
 | 	u32 base_size; | 
 | 	unsigned int base_size_log; | 
 | 	u64 win_start, win_end; | 
 | 	u32 riwar; | 
 | 	int i; | 
 |  | 
 | 	if ((size & (size - 1)) != 0 || size > 0x400000000ULL) | 
 | 		return -EINVAL; | 
 |  | 
 | 	base_size_log = ilog2(size); | 
 | 	base_size = 1 << base_size_log; | 
 |  | 
 | 	/* check if addresses are aligned with the window size */ | 
 | 	if (lstart & (base_size - 1)) | 
 | 		return -EINVAL; | 
 | 	if (rstart & (base_size - 1)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* check for conflicting ranges */ | 
 | 	for (i = 0; i < RIO_INB_ATMU_COUNT; i++) { | 
 | 		riwar = in_be32(&priv->inb_atmu_regs[i].riwar); | 
 | 		if ((riwar & RIWAR_ENABLE) == 0) | 
 | 			continue; | 
 | 		win_start = ((u64)(in_be32(&priv->inb_atmu_regs[i].riwbar) & RIWBAR_BADD_MASK)) | 
 | 			<< RIWBAR_BADD_VAL_SHIFT; | 
 | 		win_end = win_start + ((1 << ((riwar & RIWAR_SIZE_MASK) + 1)) - 1); | 
 | 		if (rstart < win_end && (rstart + size) > win_start) | 
 | 			return -EINVAL; | 
 | 	} | 
 |  | 
 | 	/* find unused atmu */ | 
 | 	for (i = 0; i < RIO_INB_ATMU_COUNT; i++) { | 
 | 		riwar = in_be32(&priv->inb_atmu_regs[i].riwar); | 
 | 		if ((riwar & RIWAR_ENABLE) == 0) | 
 | 			break; | 
 | 	} | 
 | 	if (i >= RIO_INB_ATMU_COUNT) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	out_be32(&priv->inb_atmu_regs[i].riwtar, lstart >> RIWTAR_TRAD_VAL_SHIFT); | 
 | 	out_be32(&priv->inb_atmu_regs[i].riwbar, rstart >> RIWBAR_BADD_VAL_SHIFT); | 
 | 	out_be32(&priv->inb_atmu_regs[i].riwar, RIWAR_ENABLE | RIWAR_TGINT_LOCAL | | 
 | 		RIWAR_RDTYP_SNOOP | RIWAR_WRTYP_SNOOP | (base_size_log - 1)); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | void fsl_unmap_inb_mem(struct rio_mport *mport, dma_addr_t lstart) | 
 | { | 
 | 	u32 win_start_shift, base_start_shift; | 
 | 	struct rio_priv *priv = mport->priv; | 
 | 	u32 riwar, riwtar; | 
 | 	int i; | 
 |  | 
 | 	/* skip default window */ | 
 | 	base_start_shift = lstart >> RIWTAR_TRAD_VAL_SHIFT; | 
 | 	for (i = 0; i < RIO_INB_ATMU_COUNT; i++) { | 
 | 		riwar = in_be32(&priv->inb_atmu_regs[i].riwar); | 
 | 		if ((riwar & RIWAR_ENABLE) == 0) | 
 | 			continue; | 
 |  | 
 | 		riwtar = in_be32(&priv->inb_atmu_regs[i].riwtar); | 
 | 		win_start_shift = riwtar & RIWTAR_TRAD_MASK; | 
 | 		if (win_start_shift == base_start_shift) { | 
 | 			out_be32(&priv->inb_atmu_regs[i].riwar, riwar & ~RIWAR_ENABLE); | 
 | 			return; | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | void fsl_rio_port_error_handler(int offset) | 
 | { | 
 | 	/*XXX: Error recovery is not implemented, we just clear errors */ | 
 | 	out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0); | 
 |  | 
 | 	if (offset == 0) { | 
 | 		out_be32((u32 *)(rio_regs_win + RIO_PORT1_EDCSR), 0); | 
 | 		out_be32((u32 *)(rio_regs_win + RIO_PORT1_IECSR), IECSR_CLEAR); | 
 | 		out_be32((u32 *)(rio_regs_win + RIO_ESCSR), ESCSR_CLEAR); | 
 | 	} else { | 
 | 		out_be32((u32 *)(rio_regs_win + RIO_PORT2_EDCSR), 0); | 
 | 		out_be32((u32 *)(rio_regs_win + RIO_PORT2_IECSR), IECSR_CLEAR); | 
 | 		out_be32((u32 *)(rio_regs_win + RIO_PORT2_ESCSR), ESCSR_CLEAR); | 
 | 	} | 
 | } | 
 | static inline void fsl_rio_info(struct device *dev, u32 ccsr) | 
 | { | 
 | 	const char *str; | 
 | 	if (ccsr & 1) { | 
 | 		/* Serial phy */ | 
 | 		switch (ccsr >> 30) { | 
 | 		case 0: | 
 | 			str = "1"; | 
 | 			break; | 
 | 		case 1: | 
 | 			str = "4"; | 
 | 			break; | 
 | 		default: | 
 | 			str = "Unknown"; | 
 | 			break; | 
 | 		} | 
 | 		dev_info(dev, "Hardware port width: %s\n", str); | 
 |  | 
 | 		switch ((ccsr >> 27) & 7) { | 
 | 		case 0: | 
 | 			str = "Single-lane 0"; | 
 | 			break; | 
 | 		case 1: | 
 | 			str = "Single-lane 2"; | 
 | 			break; | 
 | 		case 2: | 
 | 			str = "Four-lane"; | 
 | 			break; | 
 | 		default: | 
 | 			str = "Unknown"; | 
 | 			break; | 
 | 		} | 
 | 		dev_info(dev, "Training connection status: %s\n", str); | 
 | 	} else { | 
 | 		/* Parallel phy */ | 
 | 		if (!(ccsr & 0x80000000)) | 
 | 			dev_info(dev, "Output port operating in 8-bit mode\n"); | 
 | 		if (!(ccsr & 0x08000000)) | 
 | 			dev_info(dev, "Input port operating in 8-bit mode\n"); | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * fsl_rio_setup - Setup Freescale PowerPC RapidIO interface | 
 |  * @dev: platform_device pointer | 
 |  * | 
 |  * Initializes MPC85xx RapidIO hardware interface, configures | 
 |  * master port with system-specific info, and registers the | 
 |  * master port with the RapidIO subsystem. | 
 |  */ | 
 | int fsl_rio_setup(struct platform_device *dev) | 
 | { | 
 | 	struct rio_ops *ops; | 
 | 	struct rio_mport *port; | 
 | 	struct rio_priv *priv; | 
 | 	int rc = 0; | 
 | 	const u32 *dt_range, *cell, *port_index; | 
 | 	u32 active_ports = 0; | 
 | 	struct resource regs, rmu_regs; | 
 | 	struct device_node *np, *rmu_node; | 
 | 	int rlen; | 
 | 	u32 ccsr; | 
 | 	u64 range_start, range_size; | 
 | 	int paw, aw, sw; | 
 | 	u32 i; | 
 | 	static int tmp; | 
 | 	struct device_node *rmu_np[MAX_MSG_UNIT_NUM] = {NULL}; | 
 |  | 
 | 	if (!dev->dev.of_node) { | 
 | 		dev_err(&dev->dev, "Device OF-Node is NULL"); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	rc = of_address_to_resource(dev->dev.of_node, 0, ®s); | 
 | 	if (rc) { | 
 | 		dev_err(&dev->dev, "Can't get %pOF property 'reg'\n", | 
 | 				dev->dev.of_node); | 
 | 		return -EFAULT; | 
 | 	} | 
 | 	dev_info(&dev->dev, "Of-device full name %pOF\n", | 
 | 			dev->dev.of_node); | 
 | 	dev_info(&dev->dev, "Regs: %pR\n", ®s); | 
 |  | 
 | 	rio_regs_win = ioremap(regs.start, resource_size(®s)); | 
 | 	if (!rio_regs_win) { | 
 | 		dev_err(&dev->dev, "Unable to map rio register window\n"); | 
 | 		rc = -ENOMEM; | 
 | 		goto err_rio_regs; | 
 | 	} | 
 |  | 
 | 	ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL); | 
 | 	if (!ops) { | 
 | 		rc = -ENOMEM; | 
 | 		goto err_ops; | 
 | 	} | 
 | 	ops->lcread = fsl_local_config_read; | 
 | 	ops->lcwrite = fsl_local_config_write; | 
 | 	ops->cread = fsl_rio_config_read; | 
 | 	ops->cwrite = fsl_rio_config_write; | 
 | 	ops->dsend = fsl_rio_doorbell_send; | 
 | 	ops->pwenable = fsl_rio_pw_enable; | 
 | 	ops->open_outb_mbox = fsl_open_outb_mbox; | 
 | 	ops->open_inb_mbox = fsl_open_inb_mbox; | 
 | 	ops->close_outb_mbox = fsl_close_outb_mbox; | 
 | 	ops->close_inb_mbox = fsl_close_inb_mbox; | 
 | 	ops->add_outb_message = fsl_add_outb_message; | 
 | 	ops->add_inb_buffer = fsl_add_inb_buffer; | 
 | 	ops->get_inb_message = fsl_get_inb_message; | 
 | 	ops->map_inb = fsl_map_inb_mem; | 
 | 	ops->unmap_inb = fsl_unmap_inb_mem; | 
 |  | 
 | 	rmu_node = of_parse_phandle(dev->dev.of_node, "fsl,srio-rmu-handle", 0); | 
 | 	if (!rmu_node) { | 
 | 		dev_err(&dev->dev, "No valid fsl,srio-rmu-handle property\n"); | 
 | 		rc = -ENOENT; | 
 | 		goto err_rmu; | 
 | 	} | 
 | 	rc = of_address_to_resource(rmu_node, 0, &rmu_regs); | 
 | 	if (rc) { | 
 | 		dev_err(&dev->dev, "Can't get %pOF property 'reg'\n", | 
 | 				rmu_node); | 
 | 		of_node_put(rmu_node); | 
 | 		goto err_rmu; | 
 | 	} | 
 | 	of_node_put(rmu_node); | 
 | 	rmu_regs_win = ioremap(rmu_regs.start, resource_size(&rmu_regs)); | 
 | 	if (!rmu_regs_win) { | 
 | 		dev_err(&dev->dev, "Unable to map rmu register window\n"); | 
 | 		rc = -ENOMEM; | 
 | 		goto err_rmu; | 
 | 	} | 
 | 	for_each_compatible_node(np, NULL, "fsl,srio-msg-unit") { | 
 | 		rmu_np[tmp] = np; | 
 | 		tmp++; | 
 | 	} | 
 |  | 
 | 	/*set up doobell node*/ | 
 | 	np = of_find_compatible_node(NULL, NULL, "fsl,srio-dbell-unit"); | 
 | 	if (!np) { | 
 | 		dev_err(&dev->dev, "No fsl,srio-dbell-unit node\n"); | 
 | 		rc = -ENODEV; | 
 | 		goto err_dbell; | 
 | 	} | 
 | 	dbell = kzalloc(sizeof(struct fsl_rio_dbell), GFP_KERNEL); | 
 | 	if (!(dbell)) { | 
 | 		dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_dbell'\n"); | 
 | 		rc = -ENOMEM; | 
 | 		goto err_dbell; | 
 | 	} | 
 | 	dbell->dev = &dev->dev; | 
 | 	dbell->bellirq = irq_of_parse_and_map(np, 1); | 
 | 	dev_info(&dev->dev, "bellirq: %d\n", dbell->bellirq); | 
 |  | 
 | 	aw = of_n_addr_cells(np); | 
 | 	dt_range = of_get_property(np, "reg", &rlen); | 
 | 	if (!dt_range) { | 
 | 		pr_err("%pOF: unable to find 'reg' property\n", | 
 | 			np); | 
 | 		rc = -ENOMEM; | 
 | 		goto err_pw; | 
 | 	} | 
 | 	range_start = of_read_number(dt_range, aw); | 
 | 	dbell->dbell_regs = (struct rio_dbell_regs *)(rmu_regs_win + | 
 | 				(u32)range_start); | 
 |  | 
 | 	/*set up port write node*/ | 
 | 	np = of_find_compatible_node(NULL, NULL, "fsl,srio-port-write-unit"); | 
 | 	if (!np) { | 
 | 		dev_err(&dev->dev, "No fsl,srio-port-write-unit node\n"); | 
 | 		rc = -ENODEV; | 
 | 		goto err_pw; | 
 | 	} | 
 | 	pw = kzalloc(sizeof(struct fsl_rio_pw), GFP_KERNEL); | 
 | 	if (!(pw)) { | 
 | 		dev_err(&dev->dev, "Can't alloc memory for 'fsl_rio_pw'\n"); | 
 | 		rc = -ENOMEM; | 
 | 		goto err_pw; | 
 | 	} | 
 | 	pw->dev = &dev->dev; | 
 | 	pw->pwirq = irq_of_parse_and_map(np, 0); | 
 | 	dev_info(&dev->dev, "pwirq: %d\n", pw->pwirq); | 
 | 	aw = of_n_addr_cells(np); | 
 | 	dt_range = of_get_property(np, "reg", &rlen); | 
 | 	if (!dt_range) { | 
 | 		pr_err("%pOF: unable to find 'reg' property\n", | 
 | 			np); | 
 | 		rc = -ENOMEM; | 
 | 		goto err; | 
 | 	} | 
 | 	range_start = of_read_number(dt_range, aw); | 
 | 	pw->pw_regs = (struct rio_pw_regs *)(rmu_regs_win + (u32)range_start); | 
 |  | 
 | 	/*set up ports node*/ | 
 | 	for_each_child_of_node(dev->dev.of_node, np) { | 
 | 		port_index = of_get_property(np, "cell-index", NULL); | 
 | 		if (!port_index) { | 
 | 			dev_err(&dev->dev, "Can't get %pOF property 'cell-index'\n", | 
 | 					np); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		dt_range = of_get_property(np, "ranges", &rlen); | 
 | 		if (!dt_range) { | 
 | 			dev_err(&dev->dev, "Can't get %pOF property 'ranges'\n", | 
 | 					np); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		/* Get node address wide */ | 
 | 		cell = of_get_property(np, "#address-cells", NULL); | 
 | 		if (cell) | 
 | 			aw = *cell; | 
 | 		else | 
 | 			aw = of_n_addr_cells(np); | 
 | 		/* Get node size wide */ | 
 | 		cell = of_get_property(np, "#size-cells", NULL); | 
 | 		if (cell) | 
 | 			sw = *cell; | 
 | 		else | 
 | 			sw = of_n_size_cells(np); | 
 | 		/* Get parent address wide wide */ | 
 | 		paw = of_n_addr_cells(np); | 
 | 		range_start = of_read_number(dt_range + aw, paw); | 
 | 		range_size = of_read_number(dt_range + aw + paw, sw); | 
 |  | 
 | 		dev_info(&dev->dev, "%pOF: LAW start 0x%016llx, size 0x%016llx.\n", | 
 | 				np, range_start, range_size); | 
 |  | 
 | 		port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL); | 
 | 		if (!port) | 
 | 			continue; | 
 |  | 
 | 		rc = rio_mport_initialize(port); | 
 | 		if (rc) { | 
 | 			kfree(port); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		i = *port_index - 1; | 
 | 		port->index = (unsigned char)i; | 
 |  | 
 | 		priv = kzalloc(sizeof(struct rio_priv), GFP_KERNEL); | 
 | 		if (!priv) { | 
 | 			dev_err(&dev->dev, "Can't alloc memory for 'priv'\n"); | 
 | 			kfree(port); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		INIT_LIST_HEAD(&port->dbells); | 
 | 		port->iores.start = range_start; | 
 | 		port->iores.end = port->iores.start + range_size - 1; | 
 | 		port->iores.flags = IORESOURCE_MEM; | 
 | 		port->iores.name = "rio_io_win"; | 
 |  | 
 | 		if (request_resource(&iomem_resource, &port->iores) < 0) { | 
 | 			dev_err(&dev->dev, "RIO: Error requesting master port region" | 
 | 				" 0x%016llx-0x%016llx\n", | 
 | 				(u64)port->iores.start, (u64)port->iores.end); | 
 | 				kfree(priv); | 
 | 				kfree(port); | 
 | 				continue; | 
 | 		} | 
 | 		sprintf(port->name, "RIO mport %d", i); | 
 |  | 
 | 		priv->dev = &dev->dev; | 
 | 		port->dev.parent = &dev->dev; | 
 | 		port->ops = ops; | 
 | 		port->priv = priv; | 
 | 		port->phys_efptr = 0x100; | 
 | 		port->phys_rmap = 1; | 
 | 		priv->regs_win = rio_regs_win; | 
 |  | 
 | 		ccsr = in_be32(priv->regs_win + RIO_CCSR + i*0x20); | 
 |  | 
 | 		/* Checking the port training status */ | 
 | 		if (in_be32((priv->regs_win + RIO_ESCSR + i*0x20)) & 1) { | 
 | 			dev_err(&dev->dev, "Port %d is not ready. " | 
 | 			"Try to restart connection...\n", i); | 
 | 			/* Disable ports */ | 
 | 			out_be32(priv->regs_win | 
 | 				+ RIO_CCSR + i*0x20, 0); | 
 | 			/* Set 1x lane */ | 
 | 			setbits32(priv->regs_win | 
 | 				+ RIO_CCSR + i*0x20, 0x02000000); | 
 | 			/* Enable ports */ | 
 | 			setbits32(priv->regs_win | 
 | 				+ RIO_CCSR + i*0x20, 0x00600000); | 
 | 			msleep(100); | 
 | 			if (in_be32((priv->regs_win | 
 | 					+ RIO_ESCSR + i*0x20)) & 1) { | 
 | 				dev_err(&dev->dev, | 
 | 					"Port %d restart failed.\n", i); | 
 | 				release_resource(&port->iores); | 
 | 				kfree(priv); | 
 | 				kfree(port); | 
 | 				continue; | 
 | 			} | 
 | 			dev_info(&dev->dev, "Port %d restart success!\n", i); | 
 | 		} | 
 | 		fsl_rio_info(&dev->dev, ccsr); | 
 |  | 
 | 		port->sys_size = (in_be32((priv->regs_win + RIO_PEF_CAR)) | 
 | 					& RIO_PEF_CTLS) >> 4; | 
 | 		dev_info(&dev->dev, "RapidIO Common Transport System size: %d\n", | 
 | 				port->sys_size ? 65536 : 256); | 
 |  | 
 | 		if (port->host_deviceid >= 0) | 
 | 			out_be32(priv->regs_win + RIO_GCCSR, RIO_PORT_GEN_HOST | | 
 | 				RIO_PORT_GEN_MASTER | RIO_PORT_GEN_DISCOVERED); | 
 | 		else | 
 | 			out_be32(priv->regs_win + RIO_GCCSR, | 
 | 				RIO_PORT_GEN_MASTER); | 
 |  | 
 | 		priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win | 
 | 			+ ((i == 0) ? RIO_ATMU_REGS_PORT1_OFFSET : | 
 | 			RIO_ATMU_REGS_PORT2_OFFSET)); | 
 |  | 
 | 		priv->maint_atmu_regs = priv->atmu_regs + 1; | 
 | 		priv->inb_atmu_regs = (struct rio_inb_atmu_regs __iomem *) | 
 | 			(priv->regs_win + | 
 | 			((i == 0) ? RIO_INB_ATMU_REGS_PORT1_OFFSET : | 
 | 			RIO_INB_ATMU_REGS_PORT2_OFFSET)); | 
 |  | 
 | 		/* Set to receive packets with any dest ID */ | 
 | 		out_be32((priv->regs_win + RIO_ISR_AACR + i*0x80), | 
 | 			 RIO_ISR_AACR_AA); | 
 |  | 
 | 		/* Configure maintenance transaction window */ | 
 | 		out_be32(&priv->maint_atmu_regs->rowbar, | 
 | 			port->iores.start >> 12); | 
 | 		out_be32(&priv->maint_atmu_regs->rowar, | 
 | 			 0x80077000 | (ilog2(RIO_MAINT_WIN_SIZE) - 1)); | 
 |  | 
 | 		priv->maint_win = ioremap(port->iores.start, | 
 | 				RIO_MAINT_WIN_SIZE); | 
 |  | 
 | 		rio_law_start = range_start; | 
 |  | 
 | 		fsl_rio_setup_rmu(port, rmu_np[i]); | 
 | 		fsl_rio_inbound_mem_init(priv); | 
 |  | 
 | 		dbell->mport[i] = port; | 
 | 		pw->mport[i] = port; | 
 |  | 
 | 		if (rio_register_mport(port)) { | 
 | 			release_resource(&port->iores); | 
 | 			kfree(priv); | 
 | 			kfree(port); | 
 | 			continue; | 
 | 		} | 
 | 		active_ports++; | 
 | 	} | 
 |  | 
 | 	if (!active_ports) { | 
 | 		rc = -ENOLINK; | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	fsl_rio_doorbell_init(dbell); | 
 | 	fsl_rio_port_write_init(pw); | 
 |  | 
 | 	return 0; | 
 | err: | 
 | 	kfree(pw); | 
 | 	pw = NULL; | 
 | err_pw: | 
 | 	kfree(dbell); | 
 | 	dbell = NULL; | 
 | err_dbell: | 
 | 	iounmap(rmu_regs_win); | 
 | 	rmu_regs_win = NULL; | 
 | err_rmu: | 
 | 	kfree(ops); | 
 | err_ops: | 
 | 	iounmap(rio_regs_win); | 
 | 	rio_regs_win = NULL; | 
 | err_rio_regs: | 
 | 	return rc; | 
 | } | 
 |  | 
 | /* The probe function for RapidIO peer-to-peer network. | 
 |  */ | 
 | static int fsl_of_rio_rpn_probe(struct platform_device *dev) | 
 | { | 
 | 	printk(KERN_INFO "Setting up RapidIO peer-to-peer network %pOF\n", | 
 | 			dev->dev.of_node); | 
 |  | 
 | 	return fsl_rio_setup(dev); | 
 | }; | 
 |  | 
 | static const struct of_device_id fsl_of_rio_rpn_ids[] = { | 
 | 	{ | 
 | 		.compatible = "fsl,srio", | 
 | 	}, | 
 | 	{}, | 
 | }; | 
 |  | 
 | static struct platform_driver fsl_of_rio_rpn_driver = { | 
 | 	.driver = { | 
 | 		.name = "fsl-of-rio", | 
 | 		.of_match_table = fsl_of_rio_rpn_ids, | 
 | 	}, | 
 | 	.probe = fsl_of_rio_rpn_probe, | 
 | }; | 
 |  | 
 | static __init int fsl_of_rio_rpn_init(void) | 
 | { | 
 | 	return platform_driver_register(&fsl_of_rio_rpn_driver); | 
 | } | 
 |  | 
 | subsys_initcall(fsl_of_rio_rpn_init); |