|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * Driver for keys on GPIO lines capable of generating interrupts. | 
|  | * | 
|  | * Copyright 2005 Phil Blundell | 
|  | * Copyright 2010, 2011 David Jander <david@protonic.nl> | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  |  | 
|  | #include <linux/hrtimer.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/irq.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/pm.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/sysctl.h> | 
|  | #include <linux/proc_fs.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/input.h> | 
|  | #include <linux/gpio_keys.h> | 
|  | #include <linux/workqueue.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/gpio/consumer.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/of_irq.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <dt-bindings/input/gpio-keys.h> | 
|  |  | 
|  | struct gpio_button_data { | 
|  | const struct gpio_keys_button *button; | 
|  | struct input_dev *input; | 
|  | struct gpio_desc *gpiod; | 
|  |  | 
|  | unsigned short *code; | 
|  |  | 
|  | struct hrtimer release_timer; | 
|  | unsigned int release_delay;	/* in msecs, for IRQ-only buttons */ | 
|  |  | 
|  | struct delayed_work work; | 
|  | struct hrtimer debounce_timer; | 
|  | unsigned int software_debounce;	/* in msecs, for GPIO-driven buttons */ | 
|  |  | 
|  | unsigned int irq; | 
|  | unsigned int wakeup_trigger_type; | 
|  | spinlock_t lock; | 
|  | bool disabled; | 
|  | bool key_pressed; | 
|  | bool suspended; | 
|  | bool debounce_use_hrtimer; | 
|  | }; | 
|  |  | 
|  | struct gpio_keys_drvdata { | 
|  | const struct gpio_keys_platform_data *pdata; | 
|  | struct input_dev *input; | 
|  | struct mutex disable_lock; | 
|  | unsigned short *keymap; | 
|  | struct gpio_button_data data[]; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * SYSFS interface for enabling/disabling keys and switches: | 
|  | * | 
|  | * There are 4 attributes under /sys/devices/platform/gpio-keys/ | 
|  | *	keys [ro]              - bitmap of keys (EV_KEY) which can be | 
|  | *	                         disabled | 
|  | *	switches [ro]          - bitmap of switches (EV_SW) which can be | 
|  | *	                         disabled | 
|  | *	disabled_keys [rw]     - bitmap of keys currently disabled | 
|  | *	disabled_switches [rw] - bitmap of switches currently disabled | 
|  | * | 
|  | * Userland can change these values and hence disable event generation | 
|  | * for each key (or switch). Disabling a key means its interrupt line | 
|  | * is disabled. | 
|  | * | 
|  | * For example, if we have following switches set up as gpio-keys: | 
|  | *	SW_DOCK = 5 | 
|  | *	SW_CAMERA_LENS_COVER = 9 | 
|  | *	SW_KEYPAD_SLIDE = 10 | 
|  | *	SW_FRONT_PROXIMITY = 11 | 
|  | * This is read from switches: | 
|  | *	11-9,5 | 
|  | * Next we want to disable proximity (11) and dock (5), we write: | 
|  | *	11,5 | 
|  | * to file disabled_switches. Now proximity and dock IRQs are disabled. | 
|  | * This can be verified by reading the file disabled_switches: | 
|  | *	11,5 | 
|  | * If we now want to enable proximity (11) switch we write: | 
|  | *	5 | 
|  | * to disabled_switches. | 
|  | * | 
|  | * We can disable only those keys which don't allow sharing the irq. | 
|  | */ | 
|  |  | 
|  | /** | 
|  | * get_n_events_by_type() - returns maximum number of events per @type | 
|  | * @type: type of button (%EV_KEY, %EV_SW) | 
|  | * | 
|  | * Return value of this function can be used to allocate bitmap | 
|  | * large enough to hold all bits for given type. | 
|  | */ | 
|  | static int get_n_events_by_type(int type) | 
|  | { | 
|  | BUG_ON(type != EV_SW && type != EV_KEY); | 
|  |  | 
|  | return (type == EV_KEY) ? KEY_CNT : SW_CNT; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * get_bm_events_by_type() - returns bitmap of supported events per @type | 
|  | * @dev: input device from which bitmap is retrieved | 
|  | * @type: type of button (%EV_KEY, %EV_SW) | 
|  | * | 
|  | * Return value of this function can be used to allocate bitmap | 
|  | * large enough to hold all bits for given type. | 
|  | */ | 
|  | static const unsigned long *get_bm_events_by_type(struct input_dev *dev, | 
|  | int type) | 
|  | { | 
|  | BUG_ON(type != EV_SW && type != EV_KEY); | 
|  |  | 
|  | return (type == EV_KEY) ? dev->keybit : dev->swbit; | 
|  | } | 
|  |  | 
|  | static void gpio_keys_quiesce_key(void *data) | 
|  | { | 
|  | struct gpio_button_data *bdata = data; | 
|  |  | 
|  | if (!bdata->gpiod) | 
|  | hrtimer_cancel(&bdata->release_timer); | 
|  | else if (bdata->debounce_use_hrtimer) | 
|  | hrtimer_cancel(&bdata->debounce_timer); | 
|  | else | 
|  | cancel_delayed_work_sync(&bdata->work); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * gpio_keys_disable_button() - disables given GPIO button | 
|  | * @bdata: button data for button to be disabled | 
|  | * | 
|  | * Disables button pointed by @bdata. This is done by masking | 
|  | * IRQ line. After this function is called, button won't generate | 
|  | * input events anymore. Note that one can only disable buttons | 
|  | * that don't share IRQs. | 
|  | * | 
|  | * Make sure that @bdata->disable_lock is locked when entering | 
|  | * this function to avoid races when concurrent threads are | 
|  | * disabling buttons at the same time. | 
|  | */ | 
|  | static void gpio_keys_disable_button(struct gpio_button_data *bdata) | 
|  | { | 
|  | if (!bdata->disabled) { | 
|  | /* | 
|  | * Disable IRQ and associated timer/work structure. | 
|  | */ | 
|  | disable_irq(bdata->irq); | 
|  | gpio_keys_quiesce_key(bdata); | 
|  | bdata->disabled = true; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * gpio_keys_enable_button() - enables given GPIO button | 
|  | * @bdata: button data for button to be disabled | 
|  | * | 
|  | * Enables given button pointed by @bdata. | 
|  | * | 
|  | * Make sure that @bdata->disable_lock is locked when entering | 
|  | * this function to avoid races with concurrent threads trying | 
|  | * to enable the same button at the same time. | 
|  | */ | 
|  | static void gpio_keys_enable_button(struct gpio_button_data *bdata) | 
|  | { | 
|  | if (bdata->disabled) { | 
|  | enable_irq(bdata->irq); | 
|  | bdata->disabled = false; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * gpio_keys_attr_show_helper() - fill in stringified bitmap of buttons | 
|  | * @ddata: pointer to drvdata | 
|  | * @buf: buffer where stringified bitmap is written | 
|  | * @type: button type (%EV_KEY, %EV_SW) | 
|  | * @only_disabled: does caller want only those buttons that are | 
|  | *                 currently disabled or all buttons that can be | 
|  | *                 disabled | 
|  | * | 
|  | * This function writes buttons that can be disabled to @buf. If | 
|  | * @only_disabled is true, then @buf contains only those buttons | 
|  | * that are currently disabled. Returns 0 on success or negative | 
|  | * errno on failure. | 
|  | */ | 
|  | static ssize_t gpio_keys_attr_show_helper(struct gpio_keys_drvdata *ddata, | 
|  | char *buf, unsigned int type, | 
|  | bool only_disabled) | 
|  | { | 
|  | int n_events = get_n_events_by_type(type); | 
|  | unsigned long *bits; | 
|  | ssize_t ret; | 
|  | int i; | 
|  |  | 
|  | bits = bitmap_zalloc(n_events, GFP_KERNEL); | 
|  | if (!bits) | 
|  | return -ENOMEM; | 
|  |  | 
|  | for (i = 0; i < ddata->pdata->nbuttons; i++) { | 
|  | struct gpio_button_data *bdata = &ddata->data[i]; | 
|  |  | 
|  | if (bdata->button->type != type) | 
|  | continue; | 
|  |  | 
|  | if (only_disabled && !bdata->disabled) | 
|  | continue; | 
|  |  | 
|  | __set_bit(*bdata->code, bits); | 
|  | } | 
|  |  | 
|  | ret = scnprintf(buf, PAGE_SIZE - 1, "%*pbl", n_events, bits); | 
|  | buf[ret++] = '\n'; | 
|  | buf[ret] = '\0'; | 
|  |  | 
|  | bitmap_free(bits); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * gpio_keys_attr_store_helper() - enable/disable buttons based on given bitmap | 
|  | * @ddata: pointer to drvdata | 
|  | * @buf: buffer from userspace that contains stringified bitmap | 
|  | * @type: button type (%EV_KEY, %EV_SW) | 
|  | * | 
|  | * This function parses stringified bitmap from @buf and disables/enables | 
|  | * GPIO buttons accordingly. Returns 0 on success and negative error | 
|  | * on failure. | 
|  | */ | 
|  | static ssize_t gpio_keys_attr_store_helper(struct gpio_keys_drvdata *ddata, | 
|  | const char *buf, unsigned int type) | 
|  | { | 
|  | int n_events = get_n_events_by_type(type); | 
|  | const unsigned long *bitmap = get_bm_events_by_type(ddata->input, type); | 
|  | unsigned long *bits; | 
|  | ssize_t error; | 
|  | int i; | 
|  |  | 
|  | bits = bitmap_alloc(n_events, GFP_KERNEL); | 
|  | if (!bits) | 
|  | return -ENOMEM; | 
|  |  | 
|  | error = bitmap_parselist(buf, bits, n_events); | 
|  | if (error) | 
|  | goto out; | 
|  |  | 
|  | /* First validate */ | 
|  | if (!bitmap_subset(bits, bitmap, n_events)) { | 
|  | error = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < ddata->pdata->nbuttons; i++) { | 
|  | struct gpio_button_data *bdata = &ddata->data[i]; | 
|  |  | 
|  | if (bdata->button->type != type) | 
|  | continue; | 
|  |  | 
|  | if (test_bit(*bdata->code, bits) && | 
|  | !bdata->button->can_disable) { | 
|  | error = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | mutex_lock(&ddata->disable_lock); | 
|  |  | 
|  | for (i = 0; i < ddata->pdata->nbuttons; i++) { | 
|  | struct gpio_button_data *bdata = &ddata->data[i]; | 
|  |  | 
|  | if (bdata->button->type != type) | 
|  | continue; | 
|  |  | 
|  | if (test_bit(*bdata->code, bits)) | 
|  | gpio_keys_disable_button(bdata); | 
|  | else | 
|  | gpio_keys_enable_button(bdata); | 
|  | } | 
|  |  | 
|  | mutex_unlock(&ddata->disable_lock); | 
|  |  | 
|  | out: | 
|  | bitmap_free(bits); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | #define ATTR_SHOW_FN(name, type, only_disabled)				\ | 
|  | static ssize_t gpio_keys_show_##name(struct device *dev,		\ | 
|  | struct device_attribute *attr,	\ | 
|  | char *buf)				\ | 
|  | {									\ | 
|  | struct platform_device *pdev = to_platform_device(dev);		\ | 
|  | struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev);	\ | 
|  | \ | 
|  | return gpio_keys_attr_show_helper(ddata, buf,			\ | 
|  | type, only_disabled);		\ | 
|  | } | 
|  |  | 
|  | ATTR_SHOW_FN(keys, EV_KEY, false); | 
|  | ATTR_SHOW_FN(switches, EV_SW, false); | 
|  | ATTR_SHOW_FN(disabled_keys, EV_KEY, true); | 
|  | ATTR_SHOW_FN(disabled_switches, EV_SW, true); | 
|  |  | 
|  | /* | 
|  | * ATTRIBUTES: | 
|  | * | 
|  | * /sys/devices/platform/gpio-keys/keys [ro] | 
|  | * /sys/devices/platform/gpio-keys/switches [ro] | 
|  | */ | 
|  | static DEVICE_ATTR(keys, S_IRUGO, gpio_keys_show_keys, NULL); | 
|  | static DEVICE_ATTR(switches, S_IRUGO, gpio_keys_show_switches, NULL); | 
|  |  | 
|  | #define ATTR_STORE_FN(name, type)					\ | 
|  | static ssize_t gpio_keys_store_##name(struct device *dev,		\ | 
|  | struct device_attribute *attr,	\ | 
|  | const char *buf,			\ | 
|  | size_t count)			\ | 
|  | {									\ | 
|  | struct platform_device *pdev = to_platform_device(dev);		\ | 
|  | struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev);	\ | 
|  | ssize_t error;							\ | 
|  | \ | 
|  | error = gpio_keys_attr_store_helper(ddata, buf, type);		\ | 
|  | if (error)							\ | 
|  | return error;						\ | 
|  | \ | 
|  | return count;							\ | 
|  | } | 
|  |  | 
|  | ATTR_STORE_FN(disabled_keys, EV_KEY); | 
|  | ATTR_STORE_FN(disabled_switches, EV_SW); | 
|  |  | 
|  | /* | 
|  | * ATTRIBUTES: | 
|  | * | 
|  | * /sys/devices/platform/gpio-keys/disabled_keys [rw] | 
|  | * /sys/devices/platform/gpio-keys/disables_switches [rw] | 
|  | */ | 
|  | static DEVICE_ATTR(disabled_keys, S_IWUSR | S_IRUGO, | 
|  | gpio_keys_show_disabled_keys, | 
|  | gpio_keys_store_disabled_keys); | 
|  | static DEVICE_ATTR(disabled_switches, S_IWUSR | S_IRUGO, | 
|  | gpio_keys_show_disabled_switches, | 
|  | gpio_keys_store_disabled_switches); | 
|  |  | 
|  | static struct attribute *gpio_keys_attrs[] = { | 
|  | &dev_attr_keys.attr, | 
|  | &dev_attr_switches.attr, | 
|  | &dev_attr_disabled_keys.attr, | 
|  | &dev_attr_disabled_switches.attr, | 
|  | NULL, | 
|  | }; | 
|  | ATTRIBUTE_GROUPS(gpio_keys); | 
|  |  | 
|  | static void gpio_keys_gpio_report_event(struct gpio_button_data *bdata) | 
|  | { | 
|  | const struct gpio_keys_button *button = bdata->button; | 
|  | struct input_dev *input = bdata->input; | 
|  | unsigned int type = button->type ?: EV_KEY; | 
|  | int state; | 
|  |  | 
|  | state = bdata->debounce_use_hrtimer ? | 
|  | gpiod_get_value(bdata->gpiod) : | 
|  | gpiod_get_value_cansleep(bdata->gpiod); | 
|  | if (state < 0) { | 
|  | dev_err(input->dev.parent, | 
|  | "failed to get gpio state: %d\n", state); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (type == EV_ABS) { | 
|  | if (state) | 
|  | input_event(input, type, button->code, button->value); | 
|  | } else { | 
|  | input_event(input, type, *bdata->code, state); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void gpio_keys_debounce_event(struct gpio_button_data *bdata) | 
|  | { | 
|  | gpio_keys_gpio_report_event(bdata); | 
|  | input_sync(bdata->input); | 
|  |  | 
|  | if (bdata->button->wakeup) | 
|  | pm_relax(bdata->input->dev.parent); | 
|  | } | 
|  |  | 
|  | static void gpio_keys_gpio_work_func(struct work_struct *work) | 
|  | { | 
|  | struct gpio_button_data *bdata = | 
|  | container_of(work, struct gpio_button_data, work.work); | 
|  |  | 
|  | gpio_keys_debounce_event(bdata); | 
|  | } | 
|  |  | 
|  | static enum hrtimer_restart gpio_keys_debounce_timer(struct hrtimer *t) | 
|  | { | 
|  | struct gpio_button_data *bdata = | 
|  | container_of(t, struct gpio_button_data, debounce_timer); | 
|  |  | 
|  | gpio_keys_debounce_event(bdata); | 
|  |  | 
|  | return HRTIMER_NORESTART; | 
|  | } | 
|  |  | 
|  | static irqreturn_t gpio_keys_gpio_isr(int irq, void *dev_id) | 
|  | { | 
|  | struct gpio_button_data *bdata = dev_id; | 
|  |  | 
|  | BUG_ON(irq != bdata->irq); | 
|  |  | 
|  | if (bdata->button->wakeup) { | 
|  | const struct gpio_keys_button *button = bdata->button; | 
|  |  | 
|  | pm_stay_awake(bdata->input->dev.parent); | 
|  | if (bdata->suspended  && | 
|  | (button->type == 0 || button->type == EV_KEY)) { | 
|  | /* | 
|  | * Simulate wakeup key press in case the key has | 
|  | * already released by the time we got interrupt | 
|  | * handler to run. | 
|  | */ | 
|  | input_report_key(bdata->input, button->code, 1); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (bdata->debounce_use_hrtimer) { | 
|  | hrtimer_start(&bdata->debounce_timer, | 
|  | ms_to_ktime(bdata->software_debounce), | 
|  | HRTIMER_MODE_REL); | 
|  | } else { | 
|  | mod_delayed_work(system_wq, | 
|  | &bdata->work, | 
|  | msecs_to_jiffies(bdata->software_debounce)); | 
|  | } | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static enum hrtimer_restart gpio_keys_irq_timer(struct hrtimer *t) | 
|  | { | 
|  | struct gpio_button_data *bdata = container_of(t, | 
|  | struct gpio_button_data, | 
|  | release_timer); | 
|  | struct input_dev *input = bdata->input; | 
|  |  | 
|  | guard(spinlock_irqsave)(&bdata->lock); | 
|  |  | 
|  | if (bdata->key_pressed) { | 
|  | input_report_key(input, *bdata->code, 0); | 
|  | input_sync(input); | 
|  | bdata->key_pressed = false; | 
|  | } | 
|  |  | 
|  | return HRTIMER_NORESTART; | 
|  | } | 
|  |  | 
|  | static irqreturn_t gpio_keys_irq_isr(int irq, void *dev_id) | 
|  | { | 
|  | struct gpio_button_data *bdata = dev_id; | 
|  | struct input_dev *input = bdata->input; | 
|  | unsigned long flags; | 
|  |  | 
|  | BUG_ON(irq != bdata->irq); | 
|  |  | 
|  | spin_lock_irqsave(&bdata->lock, flags); | 
|  |  | 
|  | if (!bdata->key_pressed) { | 
|  | if (bdata->button->wakeup) | 
|  | pm_wakeup_event(bdata->input->dev.parent, 0); | 
|  |  | 
|  | input_report_key(input, *bdata->code, 1); | 
|  | input_sync(input); | 
|  |  | 
|  | if (!bdata->release_delay) { | 
|  | input_report_key(input, *bdata->code, 0); | 
|  | input_sync(input); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | bdata->key_pressed = true; | 
|  | } | 
|  |  | 
|  | if (bdata->release_delay) | 
|  | hrtimer_start(&bdata->release_timer, | 
|  | ms_to_ktime(bdata->release_delay), | 
|  | HRTIMER_MODE_REL); | 
|  | out: | 
|  | spin_unlock_irqrestore(&bdata->lock, flags); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static int gpio_keys_setup_key(struct platform_device *pdev, | 
|  | struct input_dev *input, | 
|  | struct gpio_keys_drvdata *ddata, | 
|  | const struct gpio_keys_button *button, | 
|  | int idx, | 
|  | struct fwnode_handle *child) | 
|  | { | 
|  | const char *desc = button->desc ? button->desc : "gpio_keys"; | 
|  | struct device *dev = &pdev->dev; | 
|  | struct gpio_button_data *bdata = &ddata->data[idx]; | 
|  | irq_handler_t isr; | 
|  | unsigned long irqflags; | 
|  | int irq; | 
|  | int error; | 
|  |  | 
|  | bdata->input = input; | 
|  | bdata->button = button; | 
|  | spin_lock_init(&bdata->lock); | 
|  |  | 
|  | if (child) { | 
|  | bdata->gpiod = devm_fwnode_gpiod_get(dev, child, | 
|  | NULL, GPIOD_IN, desc); | 
|  | if (IS_ERR(bdata->gpiod)) { | 
|  | error = PTR_ERR(bdata->gpiod); | 
|  | if (error != -ENOENT) | 
|  | return dev_err_probe(dev, error, | 
|  | "failed to get gpio\n"); | 
|  |  | 
|  | /* | 
|  | * GPIO is optional, we may be dealing with | 
|  | * purely interrupt-driven setup. | 
|  | */ | 
|  | bdata->gpiod = NULL; | 
|  | } | 
|  | } else if (gpio_is_valid(button->gpio)) { | 
|  | /* | 
|  | * Legacy GPIO number, so request the GPIO here and | 
|  | * convert it to descriptor. | 
|  | */ | 
|  | unsigned flags = GPIOF_IN; | 
|  |  | 
|  | if (button->active_low) | 
|  | flags |= GPIOF_ACTIVE_LOW; | 
|  |  | 
|  | error = devm_gpio_request_one(dev, button->gpio, flags, desc); | 
|  | if (error < 0) { | 
|  | dev_err(dev, "Failed to request GPIO %d, error %d\n", | 
|  | button->gpio, error); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | bdata->gpiod = gpio_to_desc(button->gpio); | 
|  | if (!bdata->gpiod) | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (bdata->gpiod) { | 
|  | bool active_low = gpiod_is_active_low(bdata->gpiod); | 
|  |  | 
|  | if (button->debounce_interval) { | 
|  | error = gpiod_set_debounce(bdata->gpiod, | 
|  | button->debounce_interval * 1000); | 
|  | /* use timer if gpiolib doesn't provide debounce */ | 
|  | if (error < 0) | 
|  | bdata->software_debounce = | 
|  | button->debounce_interval; | 
|  |  | 
|  | /* | 
|  | * If reading the GPIO won't sleep, we can use a | 
|  | * hrtimer instead of a standard timer for the software | 
|  | * debounce, to reduce the latency as much as possible. | 
|  | */ | 
|  | bdata->debounce_use_hrtimer = | 
|  | !gpiod_cansleep(bdata->gpiod); | 
|  | } | 
|  |  | 
|  | if (button->irq) { | 
|  | bdata->irq = button->irq; | 
|  | } else { | 
|  | irq = gpiod_to_irq(bdata->gpiod); | 
|  | if (irq < 0) { | 
|  | error = irq; | 
|  | dev_err(dev, | 
|  | "Unable to get irq number for GPIO %d, error %d\n", | 
|  | button->gpio, error); | 
|  | return error; | 
|  | } | 
|  | bdata->irq = irq; | 
|  | } | 
|  |  | 
|  | INIT_DELAYED_WORK(&bdata->work, gpio_keys_gpio_work_func); | 
|  |  | 
|  | hrtimer_init(&bdata->debounce_timer, | 
|  | CLOCK_REALTIME, HRTIMER_MODE_REL); | 
|  | bdata->debounce_timer.function = gpio_keys_debounce_timer; | 
|  |  | 
|  | isr = gpio_keys_gpio_isr; | 
|  | irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING; | 
|  |  | 
|  | switch (button->wakeup_event_action) { | 
|  | case EV_ACT_ASSERTED: | 
|  | bdata->wakeup_trigger_type = active_low ? | 
|  | IRQ_TYPE_EDGE_FALLING : IRQ_TYPE_EDGE_RISING; | 
|  | break; | 
|  | case EV_ACT_DEASSERTED: | 
|  | bdata->wakeup_trigger_type = active_low ? | 
|  | IRQ_TYPE_EDGE_RISING : IRQ_TYPE_EDGE_FALLING; | 
|  | break; | 
|  | case EV_ACT_ANY: | 
|  | default: | 
|  | /* | 
|  | * For other cases, we are OK letting suspend/resume | 
|  | * not reconfigure the trigger type. | 
|  | */ | 
|  | break; | 
|  | } | 
|  | } else { | 
|  | if (!button->irq) { | 
|  | dev_err(dev, "Found button without gpio or irq\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | bdata->irq = button->irq; | 
|  |  | 
|  | if (button->type && button->type != EV_KEY) { | 
|  | dev_err(dev, "Only EV_KEY allowed for IRQ buttons.\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | bdata->release_delay = button->debounce_interval; | 
|  | hrtimer_init(&bdata->release_timer, | 
|  | CLOCK_REALTIME, HRTIMER_MODE_REL); | 
|  | bdata->release_timer.function = gpio_keys_irq_timer; | 
|  |  | 
|  | isr = gpio_keys_irq_isr; | 
|  | irqflags = 0; | 
|  |  | 
|  | /* | 
|  | * For IRQ buttons, there is no interrupt for release. | 
|  | * So we don't need to reconfigure the trigger type for wakeup. | 
|  | */ | 
|  | } | 
|  |  | 
|  | bdata->code = &ddata->keymap[idx]; | 
|  | *bdata->code = button->code; | 
|  | input_set_capability(input, button->type ?: EV_KEY, *bdata->code); | 
|  |  | 
|  | /* | 
|  | * Install custom action to cancel release timer and | 
|  | * workqueue item. | 
|  | */ | 
|  | error = devm_add_action(dev, gpio_keys_quiesce_key, bdata); | 
|  | if (error) { | 
|  | dev_err(dev, "failed to register quiesce action, error: %d\n", | 
|  | error); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If platform has specified that the button can be disabled, | 
|  | * we don't want it to share the interrupt line. | 
|  | */ | 
|  | if (!button->can_disable) | 
|  | irqflags |= IRQF_SHARED; | 
|  |  | 
|  | error = devm_request_any_context_irq(dev, bdata->irq, isr, irqflags, | 
|  | desc, bdata); | 
|  | if (error < 0) { | 
|  | dev_err(dev, "Unable to claim irq %d; error %d\n", | 
|  | bdata->irq, error); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void gpio_keys_report_state(struct gpio_keys_drvdata *ddata) | 
|  | { | 
|  | struct input_dev *input = ddata->input; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ddata->pdata->nbuttons; i++) { | 
|  | struct gpio_button_data *bdata = &ddata->data[i]; | 
|  | if (bdata->gpiod) | 
|  | gpio_keys_gpio_report_event(bdata); | 
|  | } | 
|  | input_sync(input); | 
|  | } | 
|  |  | 
|  | static int gpio_keys_open(struct input_dev *input) | 
|  | { | 
|  | struct gpio_keys_drvdata *ddata = input_get_drvdata(input); | 
|  | const struct gpio_keys_platform_data *pdata = ddata->pdata; | 
|  | int error; | 
|  |  | 
|  | if (pdata->enable) { | 
|  | error = pdata->enable(input->dev.parent); | 
|  | if (error) | 
|  | return error; | 
|  | } | 
|  |  | 
|  | /* Report current state of buttons that are connected to GPIOs */ | 
|  | gpio_keys_report_state(ddata); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void gpio_keys_close(struct input_dev *input) | 
|  | { | 
|  | struct gpio_keys_drvdata *ddata = input_get_drvdata(input); | 
|  | const struct gpio_keys_platform_data *pdata = ddata->pdata; | 
|  |  | 
|  | if (pdata->disable) | 
|  | pdata->disable(input->dev.parent); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Handlers for alternative sources of platform_data | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * Translate properties into platform_data | 
|  | */ | 
|  | static struct gpio_keys_platform_data * | 
|  | gpio_keys_get_devtree_pdata(struct device *dev) | 
|  | { | 
|  | struct gpio_keys_platform_data *pdata; | 
|  | struct gpio_keys_button *button; | 
|  | struct fwnode_handle *child; | 
|  | int nbuttons; | 
|  |  | 
|  | nbuttons = device_get_child_node_count(dev); | 
|  | if (nbuttons == 0) | 
|  | return ERR_PTR(-ENODEV); | 
|  |  | 
|  | pdata = devm_kzalloc(dev, | 
|  | sizeof(*pdata) + nbuttons * sizeof(*button), | 
|  | GFP_KERNEL); | 
|  | if (!pdata) | 
|  | return ERR_PTR(-ENOMEM); | 
|  |  | 
|  | button = (struct gpio_keys_button *)(pdata + 1); | 
|  |  | 
|  | pdata->buttons = button; | 
|  | pdata->nbuttons = nbuttons; | 
|  |  | 
|  | pdata->rep = device_property_read_bool(dev, "autorepeat"); | 
|  |  | 
|  | device_property_read_string(dev, "label", &pdata->name); | 
|  |  | 
|  | device_for_each_child_node(dev, child) { | 
|  | if (is_of_node(child)) | 
|  | button->irq = | 
|  | irq_of_parse_and_map(to_of_node(child), 0); | 
|  |  | 
|  | if (fwnode_property_read_u32(child, "linux,code", | 
|  | &button->code)) { | 
|  | dev_err(dev, "Button without keycode\n"); | 
|  | fwnode_handle_put(child); | 
|  | return ERR_PTR(-EINVAL); | 
|  | } | 
|  |  | 
|  | fwnode_property_read_string(child, "label", &button->desc); | 
|  |  | 
|  | if (fwnode_property_read_u32(child, "linux,input-type", | 
|  | &button->type)) | 
|  | button->type = EV_KEY; | 
|  |  | 
|  | fwnode_property_read_u32(child, "linux,input-value", | 
|  | (u32 *)&button->value); | 
|  |  | 
|  | button->wakeup = | 
|  | fwnode_property_read_bool(child, "wakeup-source") || | 
|  | /* legacy name */ | 
|  | fwnode_property_read_bool(child, "gpio-key,wakeup"); | 
|  |  | 
|  | fwnode_property_read_u32(child, "wakeup-event-action", | 
|  | &button->wakeup_event_action); | 
|  |  | 
|  | button->can_disable = | 
|  | fwnode_property_read_bool(child, "linux,can-disable"); | 
|  |  | 
|  | if (fwnode_property_read_u32(child, "debounce-interval", | 
|  | &button->debounce_interval)) | 
|  | button->debounce_interval = 5; | 
|  |  | 
|  | button++; | 
|  | } | 
|  |  | 
|  | return pdata; | 
|  | } | 
|  |  | 
|  | static const struct of_device_id gpio_keys_of_match[] = { | 
|  | { .compatible = "gpio-keys", }, | 
|  | { }, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, gpio_keys_of_match); | 
|  |  | 
|  | static int gpio_keys_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct device *dev = &pdev->dev; | 
|  | const struct gpio_keys_platform_data *pdata = dev_get_platdata(dev); | 
|  | struct fwnode_handle *child = NULL; | 
|  | struct gpio_keys_drvdata *ddata; | 
|  | struct input_dev *input; | 
|  | int i, error; | 
|  | int wakeup = 0; | 
|  |  | 
|  | if (!pdata) { | 
|  | pdata = gpio_keys_get_devtree_pdata(dev); | 
|  | if (IS_ERR(pdata)) | 
|  | return PTR_ERR(pdata); | 
|  | } | 
|  |  | 
|  | ddata = devm_kzalloc(dev, struct_size(ddata, data, pdata->nbuttons), | 
|  | GFP_KERNEL); | 
|  | if (!ddata) { | 
|  | dev_err(dev, "failed to allocate state\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | ddata->keymap = devm_kcalloc(dev, | 
|  | pdata->nbuttons, sizeof(ddata->keymap[0]), | 
|  | GFP_KERNEL); | 
|  | if (!ddata->keymap) | 
|  | return -ENOMEM; | 
|  |  | 
|  | input = devm_input_allocate_device(dev); | 
|  | if (!input) { | 
|  | dev_err(dev, "failed to allocate input device\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | ddata->pdata = pdata; | 
|  | ddata->input = input; | 
|  | mutex_init(&ddata->disable_lock); | 
|  |  | 
|  | platform_set_drvdata(pdev, ddata); | 
|  | input_set_drvdata(input, ddata); | 
|  |  | 
|  | input->name = pdata->name ? : pdev->name; | 
|  | input->phys = "gpio-keys/input0"; | 
|  | input->dev.parent = dev; | 
|  | input->open = gpio_keys_open; | 
|  | input->close = gpio_keys_close; | 
|  |  | 
|  | input->id.bustype = BUS_HOST; | 
|  | input->id.vendor = 0x0001; | 
|  | input->id.product = 0x0001; | 
|  | input->id.version = 0x0100; | 
|  |  | 
|  | input->keycode = ddata->keymap; | 
|  | input->keycodesize = sizeof(ddata->keymap[0]); | 
|  | input->keycodemax = pdata->nbuttons; | 
|  |  | 
|  | /* Enable auto repeat feature of Linux input subsystem */ | 
|  | if (pdata->rep) | 
|  | __set_bit(EV_REP, input->evbit); | 
|  |  | 
|  | for (i = 0; i < pdata->nbuttons; i++) { | 
|  | const struct gpio_keys_button *button = &pdata->buttons[i]; | 
|  |  | 
|  | if (!dev_get_platdata(dev)) { | 
|  | child = device_get_next_child_node(dev, child); | 
|  | if (!child) { | 
|  | dev_err(dev, | 
|  | "missing child device node for entry %d\n", | 
|  | i); | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  |  | 
|  | error = gpio_keys_setup_key(pdev, input, ddata, | 
|  | button, i, child); | 
|  | if (error) { | 
|  | fwnode_handle_put(child); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | if (button->wakeup) | 
|  | wakeup = 1; | 
|  | } | 
|  |  | 
|  | fwnode_handle_put(child); | 
|  |  | 
|  | error = input_register_device(input); | 
|  | if (error) { | 
|  | dev_err(dev, "Unable to register input device, error: %d\n", | 
|  | error); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | device_init_wakeup(dev, wakeup); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __maybe_unused | 
|  | gpio_keys_button_enable_wakeup(struct gpio_button_data *bdata) | 
|  | { | 
|  | int error; | 
|  |  | 
|  | error = enable_irq_wake(bdata->irq); | 
|  | if (error) { | 
|  | dev_err(bdata->input->dev.parent, | 
|  | "failed to configure IRQ %d as wakeup source: %d\n", | 
|  | bdata->irq, error); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | if (bdata->wakeup_trigger_type) { | 
|  | error = irq_set_irq_type(bdata->irq, | 
|  | bdata->wakeup_trigger_type); | 
|  | if (error) { | 
|  | dev_err(bdata->input->dev.parent, | 
|  | "failed to set wakeup trigger %08x for IRQ %d: %d\n", | 
|  | bdata->wakeup_trigger_type, bdata->irq, error); | 
|  | disable_irq_wake(bdata->irq); | 
|  | return error; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __maybe_unused | 
|  | gpio_keys_button_disable_wakeup(struct gpio_button_data *bdata) | 
|  | { | 
|  | int error; | 
|  |  | 
|  | /* | 
|  | * The trigger type is always both edges for gpio-based keys and we do | 
|  | * not support changing wakeup trigger for interrupt-based keys. | 
|  | */ | 
|  | if (bdata->wakeup_trigger_type) { | 
|  | error = irq_set_irq_type(bdata->irq, IRQ_TYPE_EDGE_BOTH); | 
|  | if (error) | 
|  | dev_warn(bdata->input->dev.parent, | 
|  | "failed to restore interrupt trigger for IRQ %d: %d\n", | 
|  | bdata->irq, error); | 
|  | } | 
|  |  | 
|  | error = disable_irq_wake(bdata->irq); | 
|  | if (error) | 
|  | dev_warn(bdata->input->dev.parent, | 
|  | "failed to disable IRQ %d as wake source: %d\n", | 
|  | bdata->irq, error); | 
|  | } | 
|  |  | 
|  | static int __maybe_unused | 
|  | gpio_keys_enable_wakeup(struct gpio_keys_drvdata *ddata) | 
|  | { | 
|  | struct gpio_button_data *bdata; | 
|  | int error; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ddata->pdata->nbuttons; i++) { | 
|  | bdata = &ddata->data[i]; | 
|  | if (bdata->button->wakeup) { | 
|  | error = gpio_keys_button_enable_wakeup(bdata); | 
|  | if (error) | 
|  | goto err_out; | 
|  | } | 
|  | bdata->suspended = true; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_out: | 
|  | while (i--) { | 
|  | bdata = &ddata->data[i]; | 
|  | if (bdata->button->wakeup) | 
|  | gpio_keys_button_disable_wakeup(bdata); | 
|  | bdata->suspended = false; | 
|  | } | 
|  |  | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static void __maybe_unused | 
|  | gpio_keys_disable_wakeup(struct gpio_keys_drvdata *ddata) | 
|  | { | 
|  | struct gpio_button_data *bdata; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ddata->pdata->nbuttons; i++) { | 
|  | bdata = &ddata->data[i]; | 
|  | bdata->suspended = false; | 
|  | if (irqd_is_wakeup_set(irq_get_irq_data(bdata->irq))) | 
|  | gpio_keys_button_disable_wakeup(bdata); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int gpio_keys_suspend(struct device *dev) | 
|  | { | 
|  | struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev); | 
|  | struct input_dev *input = ddata->input; | 
|  | int error; | 
|  |  | 
|  | if (device_may_wakeup(dev)) { | 
|  | error = gpio_keys_enable_wakeup(ddata); | 
|  | if (error) | 
|  | return error; | 
|  | } else { | 
|  | mutex_lock(&input->mutex); | 
|  | if (input_device_enabled(input)) | 
|  | gpio_keys_close(input); | 
|  | mutex_unlock(&input->mutex); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int gpio_keys_resume(struct device *dev) | 
|  | { | 
|  | struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev); | 
|  | struct input_dev *input = ddata->input; | 
|  | int error = 0; | 
|  |  | 
|  | if (device_may_wakeup(dev)) { | 
|  | gpio_keys_disable_wakeup(ddata); | 
|  | } else { | 
|  | mutex_lock(&input->mutex); | 
|  | if (input_device_enabled(input)) | 
|  | error = gpio_keys_open(input); | 
|  | mutex_unlock(&input->mutex); | 
|  | } | 
|  |  | 
|  | if (error) | 
|  | return error; | 
|  |  | 
|  | gpio_keys_report_state(ddata); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static DEFINE_SIMPLE_DEV_PM_OPS(gpio_keys_pm_ops, gpio_keys_suspend, gpio_keys_resume); | 
|  |  | 
|  | static void gpio_keys_shutdown(struct platform_device *pdev) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = gpio_keys_suspend(&pdev->dev); | 
|  | if (ret) | 
|  | dev_err(&pdev->dev, "failed to shutdown\n"); | 
|  | } | 
|  |  | 
|  | static struct platform_driver gpio_keys_device_driver = { | 
|  | .probe		= gpio_keys_probe, | 
|  | .shutdown	= gpio_keys_shutdown, | 
|  | .driver		= { | 
|  | .name	= "gpio-keys", | 
|  | .pm	= pm_sleep_ptr(&gpio_keys_pm_ops), | 
|  | .of_match_table = gpio_keys_of_match, | 
|  | .dev_groups	= gpio_keys_groups, | 
|  | } | 
|  | }; | 
|  |  | 
|  | static int __init gpio_keys_init(void) | 
|  | { | 
|  | return platform_driver_register(&gpio_keys_device_driver); | 
|  | } | 
|  |  | 
|  | static void __exit gpio_keys_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&gpio_keys_device_driver); | 
|  | } | 
|  |  | 
|  | late_initcall(gpio_keys_init); | 
|  | module_exit(gpio_keys_exit); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_AUTHOR("Phil Blundell <pb@handhelds.org>"); | 
|  | MODULE_DESCRIPTION("Keyboard driver for GPIOs"); | 
|  | MODULE_ALIAS("platform:gpio-keys"); |