| /* SPDX-License-Identifier: GPL-2.0 */ | |
| #ifndef __LINUX_UACCESS_H__ | |
| #define __LINUX_UACCESS_H__ | |
| #include <linux/sched.h> | |
| #include <linux/thread_info.h> | |
| #include <linux/kasan-checks.h> | |
| #define uaccess_kernel() segment_eq(get_fs(), KERNEL_DS) | |
| #include <asm/uaccess.h> | |
| /* | |
| * Architectures should provide two primitives (raw_copy_{to,from}_user()) | |
| * and get rid of their private instances of copy_{to,from}_user() and | |
| * __copy_{to,from}_user{,_inatomic}(). | |
| * | |
| * raw_copy_{to,from}_user(to, from, size) should copy up to size bytes and | |
| * return the amount left to copy. They should assume that access_ok() has | |
| * already been checked (and succeeded); they should *not* zero-pad anything. | |
| * No KASAN or object size checks either - those belong here. | |
| * | |
| * Both of these functions should attempt to copy size bytes starting at from | |
| * into the area starting at to. They must not fetch or store anything | |
| * outside of those areas. Return value must be between 0 (everything | |
| * copied successfully) and size (nothing copied). | |
| * | |
| * If raw_copy_{to,from}_user(to, from, size) returns N, size - N bytes starting | |
| * at to must become equal to the bytes fetched from the corresponding area | |
| * starting at from. All data past to + size - N must be left unmodified. | |
| * | |
| * If copying succeeds, the return value must be 0. If some data cannot be | |
| * fetched, it is permitted to copy less than had been fetched; the only | |
| * hard requirement is that not storing anything at all (i.e. returning size) | |
| * should happen only when nothing could be copied. In other words, you don't | |
| * have to squeeze as much as possible - it is allowed, but not necessary. | |
| * | |
| * For raw_copy_from_user() to always points to kernel memory and no faults | |
| * on store should happen. Interpretation of from is affected by set_fs(). | |
| * For raw_copy_to_user() it's the other way round. | |
| * | |
| * Both can be inlined - it's up to architectures whether it wants to bother | |
| * with that. They should not be used directly; they are used to implement | |
| * the 6 functions (copy_{to,from}_user(), __copy_{to,from}_user_inatomic()) | |
| * that are used instead. Out of those, __... ones are inlined. Plain | |
| * copy_{to,from}_user() might or might not be inlined. If you want them | |
| * inlined, have asm/uaccess.h define INLINE_COPY_{TO,FROM}_USER. | |
| * | |
| * NOTE: only copy_from_user() zero-pads the destination in case of short copy. | |
| * Neither __copy_from_user() nor __copy_from_user_inatomic() zero anything | |
| * at all; their callers absolutely must check the return value. | |
| * | |
| * Biarch ones should also provide raw_copy_in_user() - similar to the above, | |
| * but both source and destination are __user pointers (affected by set_fs() | |
| * as usual) and both source and destination can trigger faults. | |
| */ | |
| static __always_inline __must_check unsigned long | |
| __copy_from_user_inatomic(void *to, const void __user *from, unsigned long n) | |
| { | |
| kasan_check_write(to, n); | |
| check_object_size(to, n, false); | |
| return raw_copy_from_user(to, from, n); | |
| } | |
| static __always_inline __must_check unsigned long | |
| __copy_from_user(void *to, const void __user *from, unsigned long n) | |
| { | |
| might_fault(); | |
| kasan_check_write(to, n); | |
| check_object_size(to, n, false); | |
| return raw_copy_from_user(to, from, n); | |
| } | |
| /** | |
| * __copy_to_user_inatomic: - Copy a block of data into user space, with less checking. | |
| * @to: Destination address, in user space. | |
| * @from: Source address, in kernel space. | |
| * @n: Number of bytes to copy. | |
| * | |
| * Context: User context only. | |
| * | |
| * Copy data from kernel space to user space. Caller must check | |
| * the specified block with access_ok() before calling this function. | |
| * The caller should also make sure he pins the user space address | |
| * so that we don't result in page fault and sleep. | |
| */ | |
| static __always_inline __must_check unsigned long | |
| __copy_to_user_inatomic(void __user *to, const void *from, unsigned long n) | |
| { | |
| kasan_check_read(from, n); | |
| check_object_size(from, n, true); | |
| return raw_copy_to_user(to, from, n); | |
| } | |
| static __always_inline __must_check unsigned long | |
| __copy_to_user(void __user *to, const void *from, unsigned long n) | |
| { | |
| might_fault(); | |
| kasan_check_read(from, n); | |
| check_object_size(from, n, true); | |
| return raw_copy_to_user(to, from, n); | |
| } | |
| #ifdef INLINE_COPY_FROM_USER | |
| static inline __must_check unsigned long | |
| _copy_from_user(void *to, const void __user *from, unsigned long n) | |
| { | |
| unsigned long res = n; | |
| might_fault(); | |
| if (likely(access_ok(from, n))) { | |
| kasan_check_write(to, n); | |
| res = raw_copy_from_user(to, from, n); | |
| } | |
| if (unlikely(res)) | |
| memset(to + (n - res), 0, res); | |
| return res; | |
| } | |
| #else | |
| extern __must_check unsigned long | |
| _copy_from_user(void *, const void __user *, unsigned long); | |
| #endif | |
| #ifdef INLINE_COPY_TO_USER | |
| static inline __must_check unsigned long | |
| _copy_to_user(void __user *to, const void *from, unsigned long n) | |
| { | |
| might_fault(); | |
| if (access_ok(to, n)) { | |
| kasan_check_read(from, n); | |
| n = raw_copy_to_user(to, from, n); | |
| } | |
| return n; | |
| } | |
| #else | |
| extern __must_check unsigned long | |
| _copy_to_user(void __user *, const void *, unsigned long); | |
| #endif | |
| static __always_inline unsigned long __must_check | |
| copy_from_user(void *to, const void __user *from, unsigned long n) | |
| { | |
| if (likely(check_copy_size(to, n, false))) | |
| n = _copy_from_user(to, from, n); | |
| return n; | |
| } | |
| static __always_inline unsigned long __must_check | |
| copy_to_user(void __user *to, const void *from, unsigned long n) | |
| { | |
| if (likely(check_copy_size(from, n, true))) | |
| n = _copy_to_user(to, from, n); | |
| return n; | |
| } | |
| #ifdef CONFIG_COMPAT | |
| static __always_inline unsigned long __must_check | |
| copy_in_user(void __user *to, const void __user *from, unsigned long n) | |
| { | |
| might_fault(); | |
| if (access_ok(to, n) && access_ok(from, n)) | |
| n = raw_copy_in_user(to, from, n); | |
| return n; | |
| } | |
| #endif | |
| static __always_inline void pagefault_disabled_inc(void) | |
| { | |
| current->pagefault_disabled++; | |
| } | |
| static __always_inline void pagefault_disabled_dec(void) | |
| { | |
| current->pagefault_disabled--; | |
| } | |
| /* | |
| * These routines enable/disable the pagefault handler. If disabled, it will | |
| * not take any locks and go straight to the fixup table. | |
| * | |
| * User access methods will not sleep when called from a pagefault_disabled() | |
| * environment. | |
| */ | |
| static inline void pagefault_disable(void) | |
| { | |
| pagefault_disabled_inc(); | |
| /* | |
| * make sure to have issued the store before a pagefault | |
| * can hit. | |
| */ | |
| barrier(); | |
| } | |
| static inline void pagefault_enable(void) | |
| { | |
| /* | |
| * make sure to issue those last loads/stores before enabling | |
| * the pagefault handler again. | |
| */ | |
| barrier(); | |
| pagefault_disabled_dec(); | |
| } | |
| /* | |
| * Is the pagefault handler disabled? If so, user access methods will not sleep. | |
| */ | |
| static inline bool pagefault_disabled(void) | |
| { | |
| return current->pagefault_disabled != 0; | |
| } | |
| /* | |
| * The pagefault handler is in general disabled by pagefault_disable() or | |
| * when in irq context (via in_atomic()). | |
| * | |
| * This function should only be used by the fault handlers. Other users should | |
| * stick to pagefault_disabled(). | |
| * Please NEVER use preempt_disable() to disable the fault handler. With | |
| * !CONFIG_PREEMPT_COUNT, this is like a NOP. So the handler won't be disabled. | |
| * in_atomic() will report different values based on !CONFIG_PREEMPT_COUNT. | |
| */ | |
| #define faulthandler_disabled() (pagefault_disabled() || in_atomic()) | |
| #ifndef ARCH_HAS_NOCACHE_UACCESS | |
| static inline __must_check unsigned long | |
| __copy_from_user_inatomic_nocache(void *to, const void __user *from, | |
| unsigned long n) | |
| { | |
| return __copy_from_user_inatomic(to, from, n); | |
| } | |
| #endif /* ARCH_HAS_NOCACHE_UACCESS */ | |
| extern __must_check int check_zeroed_user(const void __user *from, size_t size); | |
| /** | |
| * copy_struct_from_user: copy a struct from userspace | |
| * @dst: Destination address, in kernel space. This buffer must be @ksize | |
| * bytes long. | |
| * @ksize: Size of @dst struct. | |
| * @src: Source address, in userspace. | |
| * @usize: (Alleged) size of @src struct. | |
| * | |
| * Copies a struct from userspace to kernel space, in a way that guarantees | |
| * backwards-compatibility for struct syscall arguments (as long as future | |
| * struct extensions are made such that all new fields are *appended* to the | |
| * old struct, and zeroed-out new fields have the same meaning as the old | |
| * struct). | |
| * | |
| * @ksize is just sizeof(*dst), and @usize should've been passed by userspace. | |
| * The recommended usage is something like the following: | |
| * | |
| * SYSCALL_DEFINE2(foobar, const struct foo __user *, uarg, size_t, usize) | |
| * { | |
| * int err; | |
| * struct foo karg = {}; | |
| * | |
| * if (usize > PAGE_SIZE) | |
| * return -E2BIG; | |
| * if (usize < FOO_SIZE_VER0) | |
| * return -EINVAL; | |
| * | |
| * err = copy_struct_from_user(&karg, sizeof(karg), uarg, usize); | |
| * if (err) | |
| * return err; | |
| * | |
| * // ... | |
| * } | |
| * | |
| * There are three cases to consider: | |
| * * If @usize == @ksize, then it's copied verbatim. | |
| * * If @usize < @ksize, then the userspace has passed an old struct to a | |
| * newer kernel. The rest of the trailing bytes in @dst (@ksize - @usize) | |
| * are to be zero-filled. | |
| * * If @usize > @ksize, then the userspace has passed a new struct to an | |
| * older kernel. The trailing bytes unknown to the kernel (@usize - @ksize) | |
| * are checked to ensure they are zeroed, otherwise -E2BIG is returned. | |
| * | |
| * Returns (in all cases, some data may have been copied): | |
| * * -E2BIG: (@usize > @ksize) and there are non-zero trailing bytes in @src. | |
| * * -EFAULT: access to userspace failed. | |
| */ | |
| static __always_inline __must_check int | |
| copy_struct_from_user(void *dst, size_t ksize, const void __user *src, | |
| size_t usize) | |
| { | |
| size_t size = min(ksize, usize); | |
| size_t rest = max(ksize, usize) - size; | |
| /* Deal with trailing bytes. */ | |
| if (usize < ksize) { | |
| memset(dst + size, 0, rest); | |
| } else if (usize > ksize) { | |
| int ret = check_zeroed_user(src + size, rest); | |
| if (ret <= 0) | |
| return ret ?: -E2BIG; | |
| } | |
| /* Copy the interoperable parts of the struct. */ | |
| if (copy_from_user(dst, src, size)) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| /* | |
| * probe_kernel_read(): safely attempt to read from a location | |
| * @dst: pointer to the buffer that shall take the data | |
| * @src: address to read from | |
| * @size: size of the data chunk | |
| * | |
| * Safely read from address @src to the buffer at @dst. If a kernel fault | |
| * happens, handle that and return -EFAULT. | |
| */ | |
| extern long probe_kernel_read(void *dst, const void *src, size_t size); | |
| extern long __probe_kernel_read(void *dst, const void *src, size_t size); | |
| /* | |
| * probe_user_read(): safely attempt to read from a location in user space | |
| * @dst: pointer to the buffer that shall take the data | |
| * @src: address to read from | |
| * @size: size of the data chunk | |
| * | |
| * Safely read from address @src to the buffer at @dst. If a kernel fault | |
| * happens, handle that and return -EFAULT. | |
| */ | |
| extern long probe_user_read(void *dst, const void __user *src, size_t size); | |
| extern long __probe_user_read(void *dst, const void __user *src, size_t size); | |
| /* | |
| * probe_kernel_write(): safely attempt to write to a location | |
| * @dst: address to write to | |
| * @src: pointer to the data that shall be written | |
| * @size: size of the data chunk | |
| * | |
| * Safely write to address @dst from the buffer at @src. If a kernel fault | |
| * happens, handle that and return -EFAULT. | |
| */ | |
| extern long notrace probe_kernel_write(void *dst, const void *src, size_t size); | |
| extern long notrace __probe_kernel_write(void *dst, const void *src, size_t size); | |
| /* | |
| * probe_user_write(): safely attempt to write to a location in user space | |
| * @dst: address to write to | |
| * @src: pointer to the data that shall be written | |
| * @size: size of the data chunk | |
| * | |
| * Safely write to address @dst from the buffer at @src. If a kernel fault | |
| * happens, handle that and return -EFAULT. | |
| */ | |
| extern long notrace probe_user_write(void __user *dst, const void *src, size_t size); | |
| extern long notrace __probe_user_write(void __user *dst, const void *src, size_t size); | |
| extern long strncpy_from_unsafe(char *dst, const void *unsafe_addr, long count); | |
| extern long strncpy_from_unsafe_user(char *dst, const void __user *unsafe_addr, | |
| long count); | |
| extern long strnlen_unsafe_user(const void __user *unsafe_addr, long count); | |
| /** | |
| * probe_kernel_address(): safely attempt to read from a location | |
| * @addr: address to read from | |
| * @retval: read into this variable | |
| * | |
| * Returns 0 on success, or -EFAULT. | |
| */ | |
| #define probe_kernel_address(addr, retval) \ | |
| probe_kernel_read(&retval, addr, sizeof(retval)) | |
| #ifndef user_access_begin | |
| #define user_access_begin(ptr,len) access_ok(ptr, len) | |
| #define user_access_end() do { } while (0) | |
| #define unsafe_op_wrap(op, err) do { if (unlikely(op)) goto err; } while (0) | |
| #define unsafe_get_user(x,p,e) unsafe_op_wrap(__get_user(x,p),e) | |
| #define unsafe_put_user(x,p,e) unsafe_op_wrap(__put_user(x,p),e) | |
| #define unsafe_copy_to_user(d,s,l,e) unsafe_op_wrap(__copy_to_user(d,s,l),e) | |
| static inline unsigned long user_access_save(void) { return 0UL; } | |
| static inline void user_access_restore(unsigned long flags) { } | |
| #endif | |
| #ifdef CONFIG_HARDENED_USERCOPY | |
| void usercopy_warn(const char *name, const char *detail, bool to_user, | |
| unsigned long offset, unsigned long len); | |
| void __noreturn usercopy_abort(const char *name, const char *detail, | |
| bool to_user, unsigned long offset, | |
| unsigned long len); | |
| #endif | |
| #endif /* __LINUX_UACCESS_H__ */ |