|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* Copyright (c) 2020, Broadcom */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/kdebug.h> | 
|  | #include <linux/gpio/consumer.h> | 
|  |  | 
|  | struct out_pin { | 
|  | u32 enable_mask; | 
|  | u32 value_mask; | 
|  | u32 changed_mask; | 
|  | u32 clr_changed_mask; | 
|  | struct gpio_desc *gpiod; | 
|  | const char *name; | 
|  | }; | 
|  |  | 
|  | struct in_pin { | 
|  | u32 enable_mask; | 
|  | u32 value_mask; | 
|  | struct gpio_desc *gpiod; | 
|  | const char *name; | 
|  | struct brcmstb_usb_pinmap_data *pdata; | 
|  | }; | 
|  |  | 
|  | struct brcmstb_usb_pinmap_data { | 
|  | void __iomem *regs; | 
|  | int in_count; | 
|  | struct in_pin *in_pins; | 
|  | int out_count; | 
|  | struct out_pin *out_pins; | 
|  | }; | 
|  |  | 
|  |  | 
|  | static void pinmap_set(void __iomem *reg, u32 mask) | 
|  | { | 
|  | u32 val; | 
|  |  | 
|  | val = readl(reg); | 
|  | val |= mask; | 
|  | writel(val, reg); | 
|  | } | 
|  |  | 
|  | static void pinmap_unset(void __iomem *reg, u32 mask) | 
|  | { | 
|  | u32 val; | 
|  |  | 
|  | val = readl(reg); | 
|  | val &= ~mask; | 
|  | writel(val, reg); | 
|  | } | 
|  |  | 
|  | static void sync_in_pin(struct in_pin *pin) | 
|  | { | 
|  | u32 val; | 
|  |  | 
|  | val = gpiod_get_value(pin->gpiod); | 
|  | if (val) | 
|  | pinmap_set(pin->pdata->regs, pin->value_mask); | 
|  | else | 
|  | pinmap_unset(pin->pdata->regs, pin->value_mask); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Interrupt from override register, propagate from override bit | 
|  | * to GPIO. | 
|  | */ | 
|  | static irqreturn_t brcmstb_usb_pinmap_ovr_isr(int irq, void *dev_id) | 
|  | { | 
|  | struct brcmstb_usb_pinmap_data *pdata = dev_id; | 
|  | struct out_pin *pout; | 
|  | u32 val; | 
|  | u32 bit; | 
|  | int x; | 
|  |  | 
|  | pr_debug("%s: reg: 0x%x\n", __func__, readl(pdata->regs)); | 
|  | pout = pdata->out_pins; | 
|  | for (x = 0; x < pdata->out_count; x++) { | 
|  | val = readl(pdata->regs); | 
|  | if (val & pout->changed_mask) { | 
|  | pinmap_set(pdata->regs, pout->clr_changed_mask); | 
|  | pinmap_unset(pdata->regs, pout->clr_changed_mask); | 
|  | bit = val & pout->value_mask; | 
|  | gpiod_set_value(pout->gpiod, bit ? 1 : 0); | 
|  | pr_debug("%s: %s bit changed state to %d\n", | 
|  | __func__, pout->name, bit ? 1 : 0); | 
|  | } | 
|  | } | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Interrupt from GPIO, propagate from GPIO to override bit. | 
|  | */ | 
|  | static irqreturn_t brcmstb_usb_pinmap_gpio_isr(int irq, void *dev_id) | 
|  | { | 
|  | struct in_pin *pin = dev_id; | 
|  |  | 
|  | pr_debug("%s: %s pin changed state\n", __func__, pin->name); | 
|  | sync_in_pin(pin); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  |  | 
|  | static void get_pin_counts(struct device_node *dn, int *in_count, | 
|  | int *out_count) | 
|  | { | 
|  | int in; | 
|  | int out; | 
|  |  | 
|  | *in_count = 0; | 
|  | *out_count = 0; | 
|  | in = of_property_count_strings(dn, "brcm,in-functions"); | 
|  | if (in < 0) | 
|  | return; | 
|  | out = of_property_count_strings(dn, "brcm,out-functions"); | 
|  | if (out < 0) | 
|  | return; | 
|  | *in_count = in; | 
|  | *out_count = out; | 
|  | } | 
|  |  | 
|  | static int parse_pins(struct device *dev, struct device_node *dn, | 
|  | struct brcmstb_usb_pinmap_data *pdata) | 
|  | { | 
|  | struct out_pin *pout; | 
|  | struct in_pin *pin; | 
|  | int index; | 
|  | int res; | 
|  | int x; | 
|  |  | 
|  | pin = pdata->in_pins; | 
|  | for (x = 0, index = 0; x < pdata->in_count; x++) { | 
|  | pin->gpiod = devm_gpiod_get_index(dev, "in", x, GPIOD_IN); | 
|  | if (IS_ERR(pin->gpiod)) { | 
|  | dev_err(dev, "Error getting gpio %s\n", pin->name); | 
|  | return PTR_ERR(pin->gpiod); | 
|  |  | 
|  | } | 
|  | res = of_property_read_string_index(dn, "brcm,in-functions", x, | 
|  | &pin->name); | 
|  | if (res < 0) { | 
|  | dev_err(dev, "Error getting brcm,in-functions for %s\n", | 
|  | pin->name); | 
|  | return res; | 
|  | } | 
|  | res = of_property_read_u32_index(dn, "brcm,in-masks", index++, | 
|  | &pin->enable_mask); | 
|  | if (res < 0) { | 
|  | dev_err(dev, "Error getting 1st brcm,in-masks for %s\n", | 
|  | pin->name); | 
|  | return res; | 
|  | } | 
|  | res = of_property_read_u32_index(dn, "brcm,in-masks", index++, | 
|  | &pin->value_mask); | 
|  | if (res < 0) { | 
|  | dev_err(dev, "Error getting 2nd brcm,in-masks for %s\n", | 
|  | pin->name); | 
|  | return res; | 
|  | } | 
|  | pin->pdata = pdata; | 
|  | pin++; | 
|  | } | 
|  | pout = pdata->out_pins; | 
|  | for (x = 0, index = 0; x < pdata->out_count; x++) { | 
|  | pout->gpiod = devm_gpiod_get_index(dev, "out", x, | 
|  | GPIOD_OUT_HIGH); | 
|  | if (IS_ERR(pout->gpiod)) { | 
|  | dev_err(dev, "Error getting gpio %s\n", pin->name); | 
|  | return PTR_ERR(pout->gpiod); | 
|  | } | 
|  | res = of_property_read_string_index(dn, "brcm,out-functions", x, | 
|  | &pout->name); | 
|  | if (res < 0) { | 
|  | dev_err(dev, "Error getting brcm,out-functions for %s\n", | 
|  | pout->name); | 
|  | return res; | 
|  | } | 
|  | res = of_property_read_u32_index(dn, "brcm,out-masks", index++, | 
|  | &pout->enable_mask); | 
|  | if (res < 0) { | 
|  | dev_err(dev, "Error getting 1st brcm,out-masks for %s\n", | 
|  | pout->name); | 
|  | return res; | 
|  | } | 
|  | res = of_property_read_u32_index(dn, "brcm,out-masks", index++, | 
|  | &pout->value_mask); | 
|  | if (res < 0) { | 
|  | dev_err(dev, "Error getting 2nd brcm,out-masks for %s\n", | 
|  | pout->name); | 
|  | return res; | 
|  | } | 
|  | res = of_property_read_u32_index(dn, "brcm,out-masks", index++, | 
|  | &pout->changed_mask); | 
|  | if (res < 0) { | 
|  | dev_err(dev, "Error getting 3rd brcm,out-masks for %s\n", | 
|  | pout->name); | 
|  | return res; | 
|  | } | 
|  | res = of_property_read_u32_index(dn, "brcm,out-masks", index++, | 
|  | &pout->clr_changed_mask); | 
|  | if (res < 0) { | 
|  | dev_err(dev, "Error getting 4th out-masks for %s\n", | 
|  | pout->name); | 
|  | return res; | 
|  | } | 
|  | pout++; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void sync_all_pins(struct brcmstb_usb_pinmap_data *pdata) | 
|  | { | 
|  | struct out_pin *pout; | 
|  | struct in_pin *pin; | 
|  | int val; | 
|  | int x; | 
|  |  | 
|  | /* | 
|  | * Enable the override, clear any changed condition and | 
|  | * propagate the state to the GPIO for all out pins. | 
|  | */ | 
|  | pout = pdata->out_pins; | 
|  | for (x = 0; x < pdata->out_count; x++) { | 
|  | pinmap_set(pdata->regs, pout->enable_mask); | 
|  | pinmap_set(pdata->regs, pout->clr_changed_mask); | 
|  | pinmap_unset(pdata->regs, pout->clr_changed_mask); | 
|  | val = readl(pdata->regs) & pout->value_mask; | 
|  | gpiod_set_value(pout->gpiod, val ? 1 : 0); | 
|  | pout++; | 
|  | } | 
|  |  | 
|  | /* sync and enable all in pins. */ | 
|  | pin = pdata->in_pins; | 
|  | for (x = 0; x < pdata->in_count; x++) { | 
|  | sync_in_pin(pin); | 
|  | pinmap_set(pdata->regs, pin->enable_mask); | 
|  | pin++; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int __init brcmstb_usb_pinmap_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct device_node *dn = pdev->dev.of_node; | 
|  | struct brcmstb_usb_pinmap_data *pdata; | 
|  | struct in_pin *pin; | 
|  | struct resource *r; | 
|  | int out_count; | 
|  | int in_count; | 
|  | int err; | 
|  | int irq; | 
|  | int x; | 
|  |  | 
|  | get_pin_counts(dn, &in_count, &out_count); | 
|  | if ((in_count + out_count) == 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | r = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | if (!r) | 
|  | return -EINVAL; | 
|  |  | 
|  | pdata = devm_kzalloc(&pdev->dev, | 
|  | sizeof(*pdata) + | 
|  | (sizeof(struct in_pin) * in_count) + | 
|  | (sizeof(struct out_pin) * out_count), GFP_KERNEL); | 
|  | if (!pdata) | 
|  | return -ENOMEM; | 
|  |  | 
|  | pdata->in_count = in_count; | 
|  | pdata->out_count = out_count; | 
|  | pdata->in_pins = (struct in_pin *)(pdata + 1); | 
|  | pdata->out_pins = (struct out_pin *)(pdata->in_pins + in_count); | 
|  |  | 
|  | pdata->regs = devm_ioremap(&pdev->dev, r->start, resource_size(r)); | 
|  | if (!pdata->regs) | 
|  | return -ENOMEM; | 
|  | platform_set_drvdata(pdev, pdata); | 
|  |  | 
|  | err = parse_pins(&pdev->dev, dn, pdata); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | sync_all_pins(pdata); | 
|  |  | 
|  | if (out_count) { | 
|  |  | 
|  | /* Enable interrupt for out pins */ | 
|  | irq = platform_get_irq(pdev, 0); | 
|  | if (irq < 0) | 
|  | return irq; | 
|  | err = devm_request_irq(&pdev->dev, irq, | 
|  | brcmstb_usb_pinmap_ovr_isr, | 
|  | IRQF_TRIGGER_RISING, | 
|  | pdev->name, pdata); | 
|  | if (err < 0) { | 
|  | dev_err(&pdev->dev, "Error requesting IRQ\n"); | 
|  | return err; | 
|  | } | 
|  | } | 
|  |  | 
|  | for (x = 0, pin = pdata->in_pins; x < pdata->in_count; x++, pin++) { | 
|  | irq = gpiod_to_irq(pin->gpiod); | 
|  | if (irq < 0) { | 
|  | dev_err(&pdev->dev, "Error getting IRQ for %s pin\n", | 
|  | pin->name); | 
|  | return irq; | 
|  | } | 
|  | err = devm_request_irq(&pdev->dev, irq, | 
|  | brcmstb_usb_pinmap_gpio_isr, | 
|  | IRQF_SHARED | IRQF_TRIGGER_RISING | | 
|  | IRQF_TRIGGER_FALLING, | 
|  | pdev->name, pin); | 
|  | if (err < 0) { | 
|  | dev_err(&pdev->dev, "Error requesting IRQ for %s pin\n", | 
|  | pin->name); | 
|  | return err; | 
|  | } | 
|  | } | 
|  |  | 
|  | dev_dbg(&pdev->dev, "Driver probe succeeded\n"); | 
|  | dev_dbg(&pdev->dev, "In pin count: %d, out pin count: %d\n", | 
|  | pdata->in_count, pdata->out_count); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  |  | 
|  | static const struct of_device_id brcmstb_usb_pinmap_of_match[] = { | 
|  | { .compatible = "brcm,usb-pinmap" }, | 
|  | { }, | 
|  | }; | 
|  |  | 
|  | static struct platform_driver brcmstb_usb_pinmap_driver = { | 
|  | .driver = { | 
|  | .name	= "brcm-usb-pinmap", | 
|  | .of_match_table = brcmstb_usb_pinmap_of_match, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static int __init brcmstb_usb_pinmap_init(void) | 
|  | { | 
|  | return platform_driver_probe(&brcmstb_usb_pinmap_driver, | 
|  | brcmstb_usb_pinmap_probe); | 
|  | } | 
|  |  | 
|  | module_init(brcmstb_usb_pinmap_init); | 
|  | MODULE_AUTHOR("Al Cooper <alcooperx@gmail.com>"); | 
|  | MODULE_DESCRIPTION("Broadcom USB Pinmap Driver"); | 
|  | MODULE_LICENSE("GPL"); |