| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Real Time Clock driver for Marvell 88PM80x PMIC | |
| * | |
| * Copyright (c) 2012 Marvell International Ltd. | |
| * Wenzeng Chen<wzch@marvell.com> | |
| * Qiao Zhou <zhouqiao@marvell.com> | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/slab.h> | |
| #include <linux/regmap.h> | |
| #include <linux/mfd/core.h> | |
| #include <linux/mfd/88pm80x.h> | |
| #include <linux/rtc.h> | |
| #define PM800_RTC_COUNTER1 (0xD1) | |
| #define PM800_RTC_COUNTER2 (0xD2) | |
| #define PM800_RTC_COUNTER3 (0xD3) | |
| #define PM800_RTC_COUNTER4 (0xD4) | |
| #define PM800_RTC_EXPIRE1_1 (0xD5) | |
| #define PM800_RTC_EXPIRE1_2 (0xD6) | |
| #define PM800_RTC_EXPIRE1_3 (0xD7) | |
| #define PM800_RTC_EXPIRE1_4 (0xD8) | |
| #define PM800_RTC_TRIM1 (0xD9) | |
| #define PM800_RTC_TRIM2 (0xDA) | |
| #define PM800_RTC_TRIM3 (0xDB) | |
| #define PM800_RTC_TRIM4 (0xDC) | |
| #define PM800_RTC_EXPIRE2_1 (0xDD) | |
| #define PM800_RTC_EXPIRE2_2 (0xDE) | |
| #define PM800_RTC_EXPIRE2_3 (0xDF) | |
| #define PM800_RTC_EXPIRE2_4 (0xE0) | |
| #define PM800_POWER_DOWN_LOG1 (0xE5) | |
| #define PM800_POWER_DOWN_LOG2 (0xE6) | |
| struct pm80x_rtc_info { | |
| struct pm80x_chip *chip; | |
| struct regmap *map; | |
| struct rtc_device *rtc_dev; | |
| struct device *dev; | |
| int irq; | |
| }; | |
| static irqreturn_t rtc_update_handler(int irq, void *data) | |
| { | |
| struct pm80x_rtc_info *info = (struct pm80x_rtc_info *)data; | |
| int mask; | |
| mask = PM800_ALARM | PM800_ALARM_WAKEUP; | |
| regmap_update_bits(info->map, PM800_RTC_CONTROL, mask | PM800_ALARM1_EN, | |
| mask); | |
| rtc_update_irq(info->rtc_dev, 1, RTC_AF); | |
| return IRQ_HANDLED; | |
| } | |
| static int pm80x_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) | |
| { | |
| struct pm80x_rtc_info *info = dev_get_drvdata(dev); | |
| if (enabled) | |
| regmap_update_bits(info->map, PM800_RTC_CONTROL, | |
| PM800_ALARM1_EN, PM800_ALARM1_EN); | |
| else | |
| regmap_update_bits(info->map, PM800_RTC_CONTROL, | |
| PM800_ALARM1_EN, 0); | |
| return 0; | |
| } | |
| /* | |
| * Calculate the next alarm time given the requested alarm time mask | |
| * and the current time. | |
| */ | |
| static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, | |
| struct rtc_time *alrm) | |
| { | |
| unsigned long next_time; | |
| unsigned long now_time; | |
| next->tm_year = now->tm_year; | |
| next->tm_mon = now->tm_mon; | |
| next->tm_mday = now->tm_mday; | |
| next->tm_hour = alrm->tm_hour; | |
| next->tm_min = alrm->tm_min; | |
| next->tm_sec = alrm->tm_sec; | |
| now_time = rtc_tm_to_time64(now); | |
| next_time = rtc_tm_to_time64(next); | |
| if (next_time < now_time) { | |
| /* Advance one day */ | |
| next_time += 60 * 60 * 24; | |
| rtc_time64_to_tm(next_time, next); | |
| } | |
| } | |
| static int pm80x_rtc_read_time(struct device *dev, struct rtc_time *tm) | |
| { | |
| struct pm80x_rtc_info *info = dev_get_drvdata(dev); | |
| unsigned char buf[4]; | |
| unsigned long ticks, base, data; | |
| regmap_raw_read(info->map, PM800_RTC_EXPIRE2_1, buf, 4); | |
| base = ((unsigned long)buf[3] << 24) | (buf[2] << 16) | | |
| (buf[1] << 8) | buf[0]; | |
| dev_dbg(info->dev, "%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3]); | |
| /* load 32-bit read-only counter */ | |
| regmap_raw_read(info->map, PM800_RTC_COUNTER1, buf, 4); | |
| data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) | | |
| (buf[1] << 8) | buf[0]; | |
| ticks = base + data; | |
| dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n", | |
| base, data, ticks); | |
| rtc_time64_to_tm(ticks, tm); | |
| return 0; | |
| } | |
| static int pm80x_rtc_set_time(struct device *dev, struct rtc_time *tm) | |
| { | |
| struct pm80x_rtc_info *info = dev_get_drvdata(dev); | |
| unsigned char buf[4]; | |
| unsigned long ticks, base, data; | |
| ticks = rtc_tm_to_time64(tm); | |
| /* load 32-bit read-only counter */ | |
| regmap_raw_read(info->map, PM800_RTC_COUNTER1, buf, 4); | |
| data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) | | |
| (buf[1] << 8) | buf[0]; | |
| base = ticks - data; | |
| dev_dbg(info->dev, "set base:0x%lx, RO count:0x%lx, ticks:0x%lx\n", | |
| base, data, ticks); | |
| buf[0] = base & 0xFF; | |
| buf[1] = (base >> 8) & 0xFF; | |
| buf[2] = (base >> 16) & 0xFF; | |
| buf[3] = (base >> 24) & 0xFF; | |
| regmap_raw_write(info->map, PM800_RTC_EXPIRE2_1, buf, 4); | |
| return 0; | |
| } | |
| static int pm80x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) | |
| { | |
| struct pm80x_rtc_info *info = dev_get_drvdata(dev); | |
| unsigned char buf[4]; | |
| unsigned long ticks, base, data; | |
| int ret; | |
| regmap_raw_read(info->map, PM800_RTC_EXPIRE2_1, buf, 4); | |
| base = ((unsigned long)buf[3] << 24) | (buf[2] << 16) | | |
| (buf[1] << 8) | buf[0]; | |
| dev_dbg(info->dev, "%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3]); | |
| regmap_raw_read(info->map, PM800_RTC_EXPIRE1_1, buf, 4); | |
| data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) | | |
| (buf[1] << 8) | buf[0]; | |
| ticks = base + data; | |
| dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n", | |
| base, data, ticks); | |
| rtc_time64_to_tm(ticks, &alrm->time); | |
| regmap_read(info->map, PM800_RTC_CONTROL, &ret); | |
| alrm->enabled = (ret & PM800_ALARM1_EN) ? 1 : 0; | |
| alrm->pending = (ret & (PM800_ALARM | PM800_ALARM_WAKEUP)) ? 1 : 0; | |
| return 0; | |
| } | |
| static int pm80x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) | |
| { | |
| struct pm80x_rtc_info *info = dev_get_drvdata(dev); | |
| struct rtc_time now_tm, alarm_tm; | |
| unsigned long ticks, base, data; | |
| unsigned char buf[4]; | |
| int mask; | |
| regmap_update_bits(info->map, PM800_RTC_CONTROL, PM800_ALARM1_EN, 0); | |
| regmap_raw_read(info->map, PM800_RTC_EXPIRE2_1, buf, 4); | |
| base = ((unsigned long)buf[3] << 24) | (buf[2] << 16) | | |
| (buf[1] << 8) | buf[0]; | |
| dev_dbg(info->dev, "%x-%x-%x-%x\n", buf[0], buf[1], buf[2], buf[3]); | |
| /* load 32-bit read-only counter */ | |
| regmap_raw_read(info->map, PM800_RTC_COUNTER1, buf, 4); | |
| data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) | | |
| (buf[1] << 8) | buf[0]; | |
| ticks = base + data; | |
| dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n", | |
| base, data, ticks); | |
| rtc_time64_to_tm(ticks, &now_tm); | |
| dev_dbg(info->dev, "%s, now time : %lu\n", __func__, ticks); | |
| rtc_next_alarm_time(&alarm_tm, &now_tm, &alrm->time); | |
| /* get new ticks for alarm in 24 hours */ | |
| ticks = rtc_tm_to_time64(&alarm_tm); | |
| dev_dbg(info->dev, "%s, alarm time: %lu\n", __func__, ticks); | |
| data = ticks - base; | |
| buf[0] = data & 0xff; | |
| buf[1] = (data >> 8) & 0xff; | |
| buf[2] = (data >> 16) & 0xff; | |
| buf[3] = (data >> 24) & 0xff; | |
| regmap_raw_write(info->map, PM800_RTC_EXPIRE1_1, buf, 4); | |
| if (alrm->enabled) { | |
| mask = PM800_ALARM | PM800_ALARM_WAKEUP | PM800_ALARM1_EN; | |
| regmap_update_bits(info->map, PM800_RTC_CONTROL, mask, mask); | |
| } else { | |
| mask = PM800_ALARM | PM800_ALARM_WAKEUP | PM800_ALARM1_EN; | |
| regmap_update_bits(info->map, PM800_RTC_CONTROL, mask, | |
| PM800_ALARM | PM800_ALARM_WAKEUP); | |
| } | |
| return 0; | |
| } | |
| static const struct rtc_class_ops pm80x_rtc_ops = { | |
| .read_time = pm80x_rtc_read_time, | |
| .set_time = pm80x_rtc_set_time, | |
| .read_alarm = pm80x_rtc_read_alarm, | |
| .set_alarm = pm80x_rtc_set_alarm, | |
| .alarm_irq_enable = pm80x_rtc_alarm_irq_enable, | |
| }; | |
| #ifdef CONFIG_PM_SLEEP | |
| static int pm80x_rtc_suspend(struct device *dev) | |
| { | |
| return pm80x_dev_suspend(dev); | |
| } | |
| static int pm80x_rtc_resume(struct device *dev) | |
| { | |
| return pm80x_dev_resume(dev); | |
| } | |
| #endif | |
| static SIMPLE_DEV_PM_OPS(pm80x_rtc_pm_ops, pm80x_rtc_suspend, pm80x_rtc_resume); | |
| static int pm80x_rtc_probe(struct platform_device *pdev) | |
| { | |
| struct pm80x_chip *chip = dev_get_drvdata(pdev->dev.parent); | |
| struct pm80x_rtc_pdata *pdata = dev_get_platdata(&pdev->dev); | |
| struct pm80x_rtc_info *info; | |
| struct device_node *node = pdev->dev.of_node; | |
| int ret; | |
| if (!pdata && !node) { | |
| dev_err(&pdev->dev, | |
| "pm80x-rtc requires platform data or of_node\n"); | |
| return -EINVAL; | |
| } | |
| if (!pdata) { | |
| pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); | |
| if (!pdata) { | |
| dev_err(&pdev->dev, "failed to allocate memory\n"); | |
| return -ENOMEM; | |
| } | |
| } | |
| info = | |
| devm_kzalloc(&pdev->dev, sizeof(struct pm80x_rtc_info), GFP_KERNEL); | |
| if (!info) | |
| return -ENOMEM; | |
| info->irq = platform_get_irq(pdev, 0); | |
| if (info->irq < 0) { | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| info->chip = chip; | |
| info->map = chip->regmap; | |
| if (!info->map) { | |
| dev_err(&pdev->dev, "no regmap!\n"); | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| info->dev = &pdev->dev; | |
| dev_set_drvdata(&pdev->dev, info); | |
| info->rtc_dev = devm_rtc_allocate_device(&pdev->dev); | |
| if (IS_ERR(info->rtc_dev)) | |
| return PTR_ERR(info->rtc_dev); | |
| ret = pm80x_request_irq(chip, info->irq, rtc_update_handler, | |
| IRQF_ONESHOT, "rtc", info); | |
| if (ret < 0) { | |
| dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n", | |
| info->irq, ret); | |
| goto out; | |
| } | |
| info->rtc_dev->ops = &pm80x_rtc_ops; | |
| info->rtc_dev->range_max = U32_MAX; | |
| ret = devm_rtc_register_device(info->rtc_dev); | |
| if (ret) | |
| goto out_rtc; | |
| /* | |
| * enable internal XO instead of internal 3.25MHz clock since it can | |
| * free running in PMIC power-down state. | |
| */ | |
| regmap_update_bits(info->map, PM800_RTC_CONTROL, PM800_RTC1_USE_XO, | |
| PM800_RTC1_USE_XO); | |
| /* remember whether this power up is caused by PMIC RTC or not */ | |
| info->rtc_dev->dev.platform_data = &pdata->rtc_wakeup; | |
| device_init_wakeup(&pdev->dev, 1); | |
| return 0; | |
| out_rtc: | |
| pm80x_free_irq(chip, info->irq, info); | |
| out: | |
| return ret; | |
| } | |
| static void pm80x_rtc_remove(struct platform_device *pdev) | |
| { | |
| struct pm80x_rtc_info *info = platform_get_drvdata(pdev); | |
| pm80x_free_irq(info->chip, info->irq, info); | |
| } | |
| static struct platform_driver pm80x_rtc_driver = { | |
| .driver = { | |
| .name = "88pm80x-rtc", | |
| .pm = &pm80x_rtc_pm_ops, | |
| }, | |
| .probe = pm80x_rtc_probe, | |
| .remove_new = pm80x_rtc_remove, | |
| }; | |
| module_platform_driver(pm80x_rtc_driver); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DESCRIPTION("Marvell 88PM80x RTC driver"); | |
| MODULE_AUTHOR("Qiao Zhou <zhouqiao@marvell.com>"); | |
| MODULE_ALIAS("platform:88pm80x-rtc"); |