| /* SPDX-License-Identifier: GPL-2.0 */ | |
| /* | |
| * linux/include/linux/sunrpc/msg_prot.h | |
| * | |
| * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de> | |
| */ | |
| #ifndef _LINUX_SUNRPC_MSGPROT_H_ | |
| #define _LINUX_SUNRPC_MSGPROT_H_ | |
| #define RPC_VERSION 2 | |
| /* spec defines authentication flavor as an unsigned 32 bit integer */ | |
| typedef u32 rpc_authflavor_t; | |
| enum rpc_auth_flavors { | |
| RPC_AUTH_NULL = 0, | |
| RPC_AUTH_UNIX = 1, | |
| RPC_AUTH_SHORT = 2, | |
| RPC_AUTH_DES = 3, | |
| RPC_AUTH_KRB = 4, | |
| RPC_AUTH_GSS = 6, | |
| RPC_AUTH_TLS = 7, | |
| RPC_AUTH_MAXFLAVOR = 8, | |
| /* pseudoflavors: */ | |
| RPC_AUTH_GSS_KRB5 = 390003, | |
| RPC_AUTH_GSS_KRB5I = 390004, | |
| RPC_AUTH_GSS_KRB5P = 390005, | |
| RPC_AUTH_GSS_LKEY = 390006, | |
| RPC_AUTH_GSS_LKEYI = 390007, | |
| RPC_AUTH_GSS_LKEYP = 390008, | |
| RPC_AUTH_GSS_SPKM = 390009, | |
| RPC_AUTH_GSS_SPKMI = 390010, | |
| RPC_AUTH_GSS_SPKMP = 390011, | |
| }; | |
| /* Maximum size (in bytes) of an rpc credential or verifier */ | |
| #define RPC_MAX_AUTH_SIZE (400) | |
| enum rpc_msg_type { | |
| RPC_CALL = 0, | |
| RPC_REPLY = 1 | |
| }; | |
| enum rpc_reply_stat { | |
| RPC_MSG_ACCEPTED = 0, | |
| RPC_MSG_DENIED = 1 | |
| }; | |
| enum rpc_accept_stat { | |
| RPC_SUCCESS = 0, | |
| RPC_PROG_UNAVAIL = 1, | |
| RPC_PROG_MISMATCH = 2, | |
| RPC_PROC_UNAVAIL = 3, | |
| RPC_GARBAGE_ARGS = 4, | |
| RPC_SYSTEM_ERR = 5, | |
| /* internal use only */ | |
| RPC_DROP_REPLY = 60000, | |
| }; | |
| enum rpc_reject_stat { | |
| RPC_MISMATCH = 0, | |
| RPC_AUTH_ERROR = 1 | |
| }; | |
| enum rpc_auth_stat { | |
| RPC_AUTH_OK = 0, | |
| RPC_AUTH_BADCRED = 1, | |
| RPC_AUTH_REJECTEDCRED = 2, | |
| RPC_AUTH_BADVERF = 3, | |
| RPC_AUTH_REJECTEDVERF = 4, | |
| RPC_AUTH_TOOWEAK = 5, | |
| /* RPCSEC_GSS errors */ | |
| RPCSEC_GSS_CREDPROBLEM = 13, | |
| RPCSEC_GSS_CTXPROBLEM = 14 | |
| }; | |
| #define RPC_MAXNETNAMELEN 256 | |
| /* | |
| * From RFC 1831: | |
| * | |
| * "A record is composed of one or more record fragments. A record | |
| * fragment is a four-byte header followed by 0 to (2**31) - 1 bytes of | |
| * fragment data. The bytes encode an unsigned binary number; as with | |
| * XDR integers, the byte order is from highest to lowest. The number | |
| * encodes two values -- a boolean which indicates whether the fragment | |
| * is the last fragment of the record (bit value 1 implies the fragment | |
| * is the last fragment) and a 31-bit unsigned binary value which is the | |
| * length in bytes of the fragment's data. The boolean value is the | |
| * highest-order bit of the header; the length is the 31 low-order bits. | |
| * (Note that this record specification is NOT in XDR standard form!)" | |
| * | |
| * The Linux RPC client always sends its requests in a single record | |
| * fragment, limiting the maximum payload size for stream transports to | |
| * 2GB. | |
| */ | |
| typedef __be32 rpc_fraghdr; | |
| #define RPC_LAST_STREAM_FRAGMENT (1U << 31) | |
| #define RPC_FRAGMENT_SIZE_MASK (~RPC_LAST_STREAM_FRAGMENT) | |
| #define RPC_MAX_FRAGMENT_SIZE ((1U << 31) - 1) | |
| /* | |
| * RPC call and reply header size as number of 32bit words (verifier | |
| * size computed separately, see below) | |
| */ | |
| #define RPC_CALLHDRSIZE (6) | |
| #define RPC_REPHDRSIZE (4) | |
| /* | |
| * Maximum RPC header size, including authentication, | |
| * as number of 32bit words (see RFCs 1831, 1832). | |
| * | |
| * xid 1 xdr unit = 4 bytes | |
| * mtype 1 | |
| * rpc_version 1 | |
| * program 1 | |
| * prog_version 1 | |
| * procedure 1 | |
| * cred { | |
| * flavor 1 | |
| * length 1 | |
| * body<RPC_MAX_AUTH_SIZE> 100 xdr units = 400 bytes | |
| * } | |
| * verf { | |
| * flavor 1 | |
| * length 1 | |
| * body<RPC_MAX_AUTH_SIZE> 100 xdr units = 400 bytes | |
| * } | |
| * TOTAL 210 xdr units = 840 bytes | |
| */ | |
| #define RPC_MAX_HEADER_WITH_AUTH \ | |
| (RPC_CALLHDRSIZE + 2*(2+RPC_MAX_AUTH_SIZE/4)) | |
| #define RPC_MAX_REPHEADER_WITH_AUTH \ | |
| (RPC_REPHDRSIZE + (2 + RPC_MAX_AUTH_SIZE/4)) | |
| /* | |
| * Well-known netids. See: | |
| * | |
| * https://www.iana.org/assignments/rpc-netids/rpc-netids.xhtml | |
| */ | |
| #define RPCBIND_NETID_UDP "udp" | |
| #define RPCBIND_NETID_TCP "tcp" | |
| #define RPCBIND_NETID_RDMA "rdma" | |
| #define RPCBIND_NETID_SCTP "sctp" | |
| #define RPCBIND_NETID_UDP6 "udp6" | |
| #define RPCBIND_NETID_TCP6 "tcp6" | |
| #define RPCBIND_NETID_RDMA6 "rdma6" | |
| #define RPCBIND_NETID_SCTP6 "sctp6" | |
| #define RPCBIND_NETID_LOCAL "local" | |
| /* | |
| * Note that RFC 1833 does not put any size restrictions on the | |
| * netid string, but all currently defined netid's fit in 5 bytes. | |
| */ | |
| #define RPCBIND_MAXNETIDLEN (5u) | |
| /* | |
| * Universal addresses are introduced in RFC 1833 and further spelled | |
| * out in RFC 3530. RPCBIND_MAXUADDRLEN defines a maximum byte length | |
| * of a universal address for use in allocating buffers and character | |
| * arrays. | |
| * | |
| * Quoting RFC 3530, section 2.2: | |
| * | |
| * For TCP over IPv4 and for UDP over IPv4, the format of r_addr is the | |
| * US-ASCII string: | |
| * | |
| * h1.h2.h3.h4.p1.p2 | |
| * | |
| * The prefix, "h1.h2.h3.h4", is the standard textual form for | |
| * representing an IPv4 address, which is always four octets long. | |
| * Assuming big-endian ordering, h1, h2, h3, and h4, are respectively, | |
| * the first through fourth octets each converted to ASCII-decimal. | |
| * Assuming big-endian ordering, p1 and p2 are, respectively, the first | |
| * and second octets each converted to ASCII-decimal. For example, if a | |
| * host, in big-endian order, has an address of 0x0A010307 and there is | |
| * a service listening on, in big endian order, port 0x020F (decimal | |
| * 527), then the complete universal address is "10.1.3.7.2.15". | |
| * | |
| * ... | |
| * | |
| * For TCP over IPv6 and for UDP over IPv6, the format of r_addr is the | |
| * US-ASCII string: | |
| * | |
| * x1:x2:x3:x4:x5:x6:x7:x8.p1.p2 | |
| * | |
| * The suffix "p1.p2" is the service port, and is computed the same way | |
| * as with universal addresses for TCP and UDP over IPv4. The prefix, | |
| * "x1:x2:x3:x4:x5:x6:x7:x8", is the standard textual form for | |
| * representing an IPv6 address as defined in Section 2.2 of [RFC2373]. | |
| * Additionally, the two alternative forms specified in Section 2.2 of | |
| * [RFC2373] are also acceptable. | |
| */ | |
| #include <linux/inet.h> | |
| /* Maximum size of the port number part of a universal address */ | |
| #define RPCBIND_MAXUADDRPLEN sizeof(".255.255") | |
| /* Maximum size of an IPv4 universal address */ | |
| #define RPCBIND_MAXUADDR4LEN \ | |
| (INET_ADDRSTRLEN + RPCBIND_MAXUADDRPLEN) | |
| /* Maximum size of an IPv6 universal address */ | |
| #define RPCBIND_MAXUADDR6LEN \ | |
| (INET6_ADDRSTRLEN + RPCBIND_MAXUADDRPLEN) | |
| /* Assume INET6_ADDRSTRLEN will always be larger than INET_ADDRSTRLEN... */ | |
| #define RPCBIND_MAXUADDRLEN RPCBIND_MAXUADDR6LEN | |
| #endif /* _LINUX_SUNRPC_MSGPROT_H_ */ |