|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * ledtrig-gio.c - LED Trigger Based on GPIO events | 
|  | * | 
|  | * Copyright 2009 Felipe Balbi <me@felipebalbi.com> | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/leds.h> | 
|  | #include <linux/slab.h> | 
|  | #include "../leds.h" | 
|  |  | 
|  | struct gpio_trig_data { | 
|  | struct led_classdev *led; | 
|  |  | 
|  | unsigned desired_brightness;	/* desired brightness when led is on */ | 
|  | unsigned inverted;		/* true when gpio is inverted */ | 
|  | unsigned gpio;			/* gpio that triggers the leds */ | 
|  | }; | 
|  |  | 
|  | static irqreturn_t gpio_trig_irq(int irq, void *_led) | 
|  | { | 
|  | struct led_classdev *led = _led; | 
|  | struct gpio_trig_data *gpio_data = led_get_trigger_data(led); | 
|  | int tmp; | 
|  |  | 
|  | tmp = gpio_get_value_cansleep(gpio_data->gpio); | 
|  | if (gpio_data->inverted) | 
|  | tmp = !tmp; | 
|  |  | 
|  | if (tmp) { | 
|  | if (gpio_data->desired_brightness) | 
|  | led_set_brightness_nosleep(gpio_data->led, | 
|  | gpio_data->desired_brightness); | 
|  | else | 
|  | led_set_brightness_nosleep(gpio_data->led, LED_FULL); | 
|  | } else { | 
|  | led_set_brightness_nosleep(gpio_data->led, LED_OFF); | 
|  | } | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static ssize_t gpio_trig_brightness_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct gpio_trig_data *gpio_data = led_trigger_get_drvdata(dev); | 
|  |  | 
|  | return sprintf(buf, "%u\n", gpio_data->desired_brightness); | 
|  | } | 
|  |  | 
|  | static ssize_t gpio_trig_brightness_store(struct device *dev, | 
|  | struct device_attribute *attr, const char *buf, size_t n) | 
|  | { | 
|  | struct gpio_trig_data *gpio_data = led_trigger_get_drvdata(dev); | 
|  | unsigned desired_brightness; | 
|  | int ret; | 
|  |  | 
|  | ret = sscanf(buf, "%u", &desired_brightness); | 
|  | if (ret < 1 || desired_brightness > 255) { | 
|  | dev_err(dev, "invalid value\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | gpio_data->desired_brightness = desired_brightness; | 
|  |  | 
|  | return n; | 
|  | } | 
|  | static DEVICE_ATTR(desired_brightness, 0644, gpio_trig_brightness_show, | 
|  | gpio_trig_brightness_store); | 
|  |  | 
|  | static ssize_t gpio_trig_inverted_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct gpio_trig_data *gpio_data = led_trigger_get_drvdata(dev); | 
|  |  | 
|  | return sprintf(buf, "%u\n", gpio_data->inverted); | 
|  | } | 
|  |  | 
|  | static ssize_t gpio_trig_inverted_store(struct device *dev, | 
|  | struct device_attribute *attr, const char *buf, size_t n) | 
|  | { | 
|  | struct led_classdev *led = led_trigger_get_led(dev); | 
|  | struct gpio_trig_data *gpio_data = led_trigger_get_drvdata(dev); | 
|  | unsigned long inverted; | 
|  | int ret; | 
|  |  | 
|  | ret = kstrtoul(buf, 10, &inverted); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | if (inverted > 1) | 
|  | return -EINVAL; | 
|  |  | 
|  | gpio_data->inverted = inverted; | 
|  |  | 
|  | /* After inverting, we need to update the LED. */ | 
|  | if (gpio_is_valid(gpio_data->gpio)) | 
|  | gpio_trig_irq(0, led); | 
|  |  | 
|  | return n; | 
|  | } | 
|  | static DEVICE_ATTR(inverted, 0644, gpio_trig_inverted_show, | 
|  | gpio_trig_inverted_store); | 
|  |  | 
|  | static ssize_t gpio_trig_gpio_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct gpio_trig_data *gpio_data = led_trigger_get_drvdata(dev); | 
|  |  | 
|  | return sprintf(buf, "%u\n", gpio_data->gpio); | 
|  | } | 
|  |  | 
|  | static ssize_t gpio_trig_gpio_store(struct device *dev, | 
|  | struct device_attribute *attr, const char *buf, size_t n) | 
|  | { | 
|  | struct led_classdev *led = led_trigger_get_led(dev); | 
|  | struct gpio_trig_data *gpio_data = led_trigger_get_drvdata(dev); | 
|  | unsigned gpio; | 
|  | int ret; | 
|  |  | 
|  | ret = sscanf(buf, "%u", &gpio); | 
|  | if (ret < 1) { | 
|  | dev_err(dev, "couldn't read gpio number\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (gpio_data->gpio == gpio) | 
|  | return n; | 
|  |  | 
|  | if (!gpio_is_valid(gpio)) { | 
|  | if (gpio_is_valid(gpio_data->gpio)) | 
|  | free_irq(gpio_to_irq(gpio_data->gpio), led); | 
|  | gpio_data->gpio = gpio; | 
|  | return n; | 
|  | } | 
|  |  | 
|  | ret = request_threaded_irq(gpio_to_irq(gpio), NULL, gpio_trig_irq, | 
|  | IRQF_ONESHOT | IRQF_SHARED | IRQF_TRIGGER_RISING | 
|  | | IRQF_TRIGGER_FALLING, "ledtrig-gpio", led); | 
|  | if (ret) { | 
|  | dev_err(dev, "request_irq failed with error %d\n", ret); | 
|  | } else { | 
|  | if (gpio_is_valid(gpio_data->gpio)) | 
|  | free_irq(gpio_to_irq(gpio_data->gpio), led); | 
|  | gpio_data->gpio = gpio; | 
|  | /* After changing the GPIO, we need to update the LED. */ | 
|  | gpio_trig_irq(0, led); | 
|  | } | 
|  |  | 
|  | return ret ? ret : n; | 
|  | } | 
|  | static DEVICE_ATTR(gpio, 0644, gpio_trig_gpio_show, gpio_trig_gpio_store); | 
|  |  | 
|  | static struct attribute *gpio_trig_attrs[] = { | 
|  | &dev_attr_desired_brightness.attr, | 
|  | &dev_attr_inverted.attr, | 
|  | &dev_attr_gpio.attr, | 
|  | NULL | 
|  | }; | 
|  | ATTRIBUTE_GROUPS(gpio_trig); | 
|  |  | 
|  | static int gpio_trig_activate(struct led_classdev *led) | 
|  | { | 
|  | struct gpio_trig_data *gpio_data; | 
|  |  | 
|  | gpio_data = kzalloc(sizeof(*gpio_data), GFP_KERNEL); | 
|  | if (!gpio_data) | 
|  | return -ENOMEM; | 
|  |  | 
|  | gpio_data->led = led; | 
|  | gpio_data->gpio = -ENOENT; | 
|  |  | 
|  | led_set_trigger_data(led, gpio_data); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void gpio_trig_deactivate(struct led_classdev *led) | 
|  | { | 
|  | struct gpio_trig_data *gpio_data = led_get_trigger_data(led); | 
|  |  | 
|  | if (gpio_is_valid(gpio_data->gpio)) | 
|  | free_irq(gpio_to_irq(gpio_data->gpio), led); | 
|  | kfree(gpio_data); | 
|  | } | 
|  |  | 
|  | static struct led_trigger gpio_led_trigger = { | 
|  | .name		= "gpio", | 
|  | .activate	= gpio_trig_activate, | 
|  | .deactivate	= gpio_trig_deactivate, | 
|  | .groups		= gpio_trig_groups, | 
|  | }; | 
|  | module_led_trigger(gpio_led_trigger); | 
|  |  | 
|  | MODULE_AUTHOR("Felipe Balbi <me@felipebalbi.com>"); | 
|  | MODULE_DESCRIPTION("GPIO LED trigger"); | 
|  | MODULE_LICENSE("GPL v2"); |