| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * isl29003.c - Linux kernel module for | |
| * Intersil ISL29003 ambient light sensor | |
| * | |
| * See file:Documentation/misc-devices/isl29003.rst | |
| * | |
| * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> | |
| * | |
| * Based on code written by | |
| * Rodolfo Giometti <giometti@linux.it> | |
| * Eurotech S.p.A. <info@eurotech.it> | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/slab.h> | |
| #include <linux/i2c.h> | |
| #include <linux/mutex.h> | |
| #include <linux/delay.h> | |
| #define ISL29003_DRV_NAME "isl29003" | |
| #define DRIVER_VERSION "1.0" | |
| #define ISL29003_REG_COMMAND 0x00 | |
| #define ISL29003_ADC_ENABLED (1 << 7) | |
| #define ISL29003_ADC_PD (1 << 6) | |
| #define ISL29003_TIMING_INT (1 << 5) | |
| #define ISL29003_MODE_SHIFT (2) | |
| #define ISL29003_MODE_MASK (0x3 << ISL29003_MODE_SHIFT) | |
| #define ISL29003_RES_SHIFT (0) | |
| #define ISL29003_RES_MASK (0x3 << ISL29003_RES_SHIFT) | |
| #define ISL29003_REG_CONTROL 0x01 | |
| #define ISL29003_INT_FLG (1 << 5) | |
| #define ISL29003_RANGE_SHIFT (2) | |
| #define ISL29003_RANGE_MASK (0x3 << ISL29003_RANGE_SHIFT) | |
| #define ISL29003_INT_PERSISTS_SHIFT (0) | |
| #define ISL29003_INT_PERSISTS_MASK (0xf << ISL29003_INT_PERSISTS_SHIFT) | |
| #define ISL29003_REG_IRQ_THRESH_HI 0x02 | |
| #define ISL29003_REG_IRQ_THRESH_LO 0x03 | |
| #define ISL29003_REG_LSB_SENSOR 0x04 | |
| #define ISL29003_REG_MSB_SENSOR 0x05 | |
| #define ISL29003_REG_LSB_TIMER 0x06 | |
| #define ISL29003_REG_MSB_TIMER 0x07 | |
| #define ISL29003_NUM_CACHABLE_REGS 4 | |
| struct isl29003_data { | |
| struct i2c_client *client; | |
| struct mutex lock; | |
| u8 reg_cache[ISL29003_NUM_CACHABLE_REGS]; | |
| u8 power_state_before_suspend; | |
| }; | |
| static int gain_range[] = { | |
| 1000, 4000, 16000, 64000 | |
| }; | |
| /* | |
| * register access helpers | |
| */ | |
| static int __isl29003_read_reg(struct i2c_client *client, | |
| u32 reg, u8 mask, u8 shift) | |
| { | |
| struct isl29003_data *data = i2c_get_clientdata(client); | |
| return (data->reg_cache[reg] & mask) >> shift; | |
| } | |
| static int __isl29003_write_reg(struct i2c_client *client, | |
| u32 reg, u8 mask, u8 shift, u8 val) | |
| { | |
| struct isl29003_data *data = i2c_get_clientdata(client); | |
| int ret = 0; | |
| u8 tmp; | |
| if (reg >= ISL29003_NUM_CACHABLE_REGS) | |
| return -EINVAL; | |
| mutex_lock(&data->lock); | |
| tmp = data->reg_cache[reg]; | |
| tmp &= ~mask; | |
| tmp |= val << shift; | |
| ret = i2c_smbus_write_byte_data(client, reg, tmp); | |
| if (!ret) | |
| data->reg_cache[reg] = tmp; | |
| mutex_unlock(&data->lock); | |
| return ret; | |
| } | |
| /* | |
| * internally used functions | |
| */ | |
| /* range */ | |
| static int isl29003_get_range(struct i2c_client *client) | |
| { | |
| return __isl29003_read_reg(client, ISL29003_REG_CONTROL, | |
| ISL29003_RANGE_MASK, ISL29003_RANGE_SHIFT); | |
| } | |
| static int isl29003_set_range(struct i2c_client *client, int range) | |
| { | |
| return __isl29003_write_reg(client, ISL29003_REG_CONTROL, | |
| ISL29003_RANGE_MASK, ISL29003_RANGE_SHIFT, range); | |
| } | |
| /* resolution */ | |
| static int isl29003_get_resolution(struct i2c_client *client) | |
| { | |
| return __isl29003_read_reg(client, ISL29003_REG_COMMAND, | |
| ISL29003_RES_MASK, ISL29003_RES_SHIFT); | |
| } | |
| static int isl29003_set_resolution(struct i2c_client *client, int res) | |
| { | |
| return __isl29003_write_reg(client, ISL29003_REG_COMMAND, | |
| ISL29003_RES_MASK, ISL29003_RES_SHIFT, res); | |
| } | |
| /* mode */ | |
| static int isl29003_get_mode(struct i2c_client *client) | |
| { | |
| return __isl29003_read_reg(client, ISL29003_REG_COMMAND, | |
| ISL29003_MODE_MASK, ISL29003_MODE_SHIFT); | |
| } | |
| static int isl29003_set_mode(struct i2c_client *client, int mode) | |
| { | |
| return __isl29003_write_reg(client, ISL29003_REG_COMMAND, | |
| ISL29003_MODE_MASK, ISL29003_MODE_SHIFT, mode); | |
| } | |
| /* power_state */ | |
| static int isl29003_set_power_state(struct i2c_client *client, int state) | |
| { | |
| return __isl29003_write_reg(client, ISL29003_REG_COMMAND, | |
| ISL29003_ADC_ENABLED | ISL29003_ADC_PD, 0, | |
| state ? ISL29003_ADC_ENABLED : ISL29003_ADC_PD); | |
| } | |
| static int isl29003_get_power_state(struct i2c_client *client) | |
| { | |
| struct isl29003_data *data = i2c_get_clientdata(client); | |
| u8 cmdreg = data->reg_cache[ISL29003_REG_COMMAND]; | |
| return ~cmdreg & ISL29003_ADC_PD; | |
| } | |
| static int isl29003_get_adc_value(struct i2c_client *client) | |
| { | |
| struct isl29003_data *data = i2c_get_clientdata(client); | |
| int lsb, msb, range, bitdepth; | |
| mutex_lock(&data->lock); | |
| lsb = i2c_smbus_read_byte_data(client, ISL29003_REG_LSB_SENSOR); | |
| if (lsb < 0) { | |
| mutex_unlock(&data->lock); | |
| return lsb; | |
| } | |
| msb = i2c_smbus_read_byte_data(client, ISL29003_REG_MSB_SENSOR); | |
| mutex_unlock(&data->lock); | |
| if (msb < 0) | |
| return msb; | |
| range = isl29003_get_range(client); | |
| bitdepth = (4 - isl29003_get_resolution(client)) * 4; | |
| return (((msb << 8) | lsb) * gain_range[range]) >> bitdepth; | |
| } | |
| /* | |
| * sysfs layer | |
| */ | |
| /* range */ | |
| static ssize_t isl29003_show_range(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| return sprintf(buf, "%i\n", isl29003_get_range(client)); | |
| } | |
| static ssize_t isl29003_store_range(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| unsigned long val; | |
| int ret; | |
| ret = kstrtoul(buf, 10, &val); | |
| if (ret) | |
| return ret; | |
| if (val > 3) | |
| return -EINVAL; | |
| ret = isl29003_set_range(client, val); | |
| if (ret < 0) | |
| return ret; | |
| return count; | |
| } | |
| static DEVICE_ATTR(range, S_IWUSR | S_IRUGO, | |
| isl29003_show_range, isl29003_store_range); | |
| /* resolution */ | |
| static ssize_t isl29003_show_resolution(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| return sprintf(buf, "%d\n", isl29003_get_resolution(client)); | |
| } | |
| static ssize_t isl29003_store_resolution(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| unsigned long val; | |
| int ret; | |
| ret = kstrtoul(buf, 10, &val); | |
| if (ret) | |
| return ret; | |
| if (val > 3) | |
| return -EINVAL; | |
| ret = isl29003_set_resolution(client, val); | |
| if (ret < 0) | |
| return ret; | |
| return count; | |
| } | |
| static DEVICE_ATTR(resolution, S_IWUSR | S_IRUGO, | |
| isl29003_show_resolution, isl29003_store_resolution); | |
| /* mode */ | |
| static ssize_t isl29003_show_mode(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| return sprintf(buf, "%d\n", isl29003_get_mode(client)); | |
| } | |
| static ssize_t isl29003_store_mode(struct device *dev, | |
| struct device_attribute *attr, const char *buf, size_t count) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| unsigned long val; | |
| int ret; | |
| ret = kstrtoul(buf, 10, &val); | |
| if (ret) | |
| return ret; | |
| if (val > 2) | |
| return -EINVAL; | |
| ret = isl29003_set_mode(client, val); | |
| if (ret < 0) | |
| return ret; | |
| return count; | |
| } | |
| static DEVICE_ATTR(mode, S_IWUSR | S_IRUGO, | |
| isl29003_show_mode, isl29003_store_mode); | |
| /* power state */ | |
| static ssize_t isl29003_show_power_state(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| return sprintf(buf, "%d\n", isl29003_get_power_state(client)); | |
| } | |
| static ssize_t isl29003_store_power_state(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| unsigned long val; | |
| int ret; | |
| ret = kstrtoul(buf, 10, &val); | |
| if (ret) | |
| return ret; | |
| if (val > 1) | |
| return -EINVAL; | |
| ret = isl29003_set_power_state(client, val); | |
| return ret ? ret : count; | |
| } | |
| static DEVICE_ATTR(power_state, S_IWUSR | S_IRUGO, | |
| isl29003_show_power_state, isl29003_store_power_state); | |
| /* lux */ | |
| static ssize_t isl29003_show_lux(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| /* No LUX data if not operational */ | |
| if (!isl29003_get_power_state(client)) | |
| return -EBUSY; | |
| return sprintf(buf, "%d\n", isl29003_get_adc_value(client)); | |
| } | |
| static DEVICE_ATTR(lux, S_IRUGO, isl29003_show_lux, NULL); | |
| static struct attribute *isl29003_attributes[] = { | |
| &dev_attr_range.attr, | |
| &dev_attr_resolution.attr, | |
| &dev_attr_mode.attr, | |
| &dev_attr_power_state.attr, | |
| &dev_attr_lux.attr, | |
| NULL | |
| }; | |
| static const struct attribute_group isl29003_attr_group = { | |
| .attrs = isl29003_attributes, | |
| }; | |
| static int isl29003_init_client(struct i2c_client *client) | |
| { | |
| struct isl29003_data *data = i2c_get_clientdata(client); | |
| int i; | |
| /* read all the registers once to fill the cache. | |
| * if one of the reads fails, we consider the init failed */ | |
| for (i = 0; i < ARRAY_SIZE(data->reg_cache); i++) { | |
| int v = i2c_smbus_read_byte_data(client, i); | |
| if (v < 0) | |
| return -ENODEV; | |
| data->reg_cache[i] = v; | |
| } | |
| /* set defaults */ | |
| isl29003_set_range(client, 0); | |
| isl29003_set_resolution(client, 0); | |
| isl29003_set_mode(client, 0); | |
| isl29003_set_power_state(client, 0); | |
| return 0; | |
| } | |
| /* | |
| * I2C layer | |
| */ | |
| static int isl29003_probe(struct i2c_client *client, | |
| const struct i2c_device_id *id) | |
| { | |
| struct i2c_adapter *adapter = client->adapter; | |
| struct isl29003_data *data; | |
| int err = 0; | |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) | |
| return -EIO; | |
| data = kzalloc(sizeof(struct isl29003_data), GFP_KERNEL); | |
| if (!data) | |
| return -ENOMEM; | |
| data->client = client; | |
| i2c_set_clientdata(client, data); | |
| mutex_init(&data->lock); | |
| /* initialize the ISL29003 chip */ | |
| err = isl29003_init_client(client); | |
| if (err) | |
| goto exit_kfree; | |
| /* register sysfs hooks */ | |
| err = sysfs_create_group(&client->dev.kobj, &isl29003_attr_group); | |
| if (err) | |
| goto exit_kfree; | |
| dev_info(&client->dev, "driver version %s enabled\n", DRIVER_VERSION); | |
| return 0; | |
| exit_kfree: | |
| kfree(data); | |
| return err; | |
| } | |
| static int isl29003_remove(struct i2c_client *client) | |
| { | |
| sysfs_remove_group(&client->dev.kobj, &isl29003_attr_group); | |
| isl29003_set_power_state(client, 0); | |
| kfree(i2c_get_clientdata(client)); | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM_SLEEP | |
| static int isl29003_suspend(struct device *dev) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| struct isl29003_data *data = i2c_get_clientdata(client); | |
| data->power_state_before_suspend = isl29003_get_power_state(client); | |
| return isl29003_set_power_state(client, 0); | |
| } | |
| static int isl29003_resume(struct device *dev) | |
| { | |
| int i; | |
| struct i2c_client *client = to_i2c_client(dev); | |
| struct isl29003_data *data = i2c_get_clientdata(client); | |
| /* restore registers from cache */ | |
| for (i = 0; i < ARRAY_SIZE(data->reg_cache); i++) | |
| if (i2c_smbus_write_byte_data(client, i, data->reg_cache[i])) | |
| return -EIO; | |
| return isl29003_set_power_state(client, | |
| data->power_state_before_suspend); | |
| } | |
| static SIMPLE_DEV_PM_OPS(isl29003_pm_ops, isl29003_suspend, isl29003_resume); | |
| #define ISL29003_PM_OPS (&isl29003_pm_ops) | |
| #else | |
| #define ISL29003_PM_OPS NULL | |
| #endif /* CONFIG_PM_SLEEP */ | |
| static const struct i2c_device_id isl29003_id[] = { | |
| { "isl29003", 0 }, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, isl29003_id); | |
| static struct i2c_driver isl29003_driver = { | |
| .driver = { | |
| .name = ISL29003_DRV_NAME, | |
| .pm = ISL29003_PM_OPS, | |
| }, | |
| .probe = isl29003_probe, | |
| .remove = isl29003_remove, | |
| .id_table = isl29003_id, | |
| }; | |
| module_i2c_driver(isl29003_driver); | |
| MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>"); | |
| MODULE_DESCRIPTION("ISL29003 ambient light sensor driver"); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_VERSION(DRIVER_VERSION); |