blob: 9dc0ad3c533a8f0f737f58fed9e6f41eae207cc1 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Derived from arch/i386/kernel/irq.c
* Copyright (C) 1992 Linus Torvalds
* Adapted from arch/i386 by Gary Thomas
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
* Updated and modified by Cort Dougan <cort@fsmlabs.com>
* Copyright (C) 1996-2001 Cort Dougan
* Adapted for Power Macintosh by Paul Mackerras
* Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au)
*
* This file contains the code used by various IRQ handling routines:
* asking for different IRQ's should be done through these routines
* instead of just grabbing them. Thus setups with different IRQ numbers
* shouldn't result in any weird surprises, and installing new handlers
* should be easier.
*/
#undef DEBUG
#include <linux/export.h>
#include <linux/threads.h>
#include <linux/kernel_stat.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/timex.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/cpumask.h>
#include <linux/profile.h>
#include <linux/bitops.h>
#include <linux/list.h>
#include <linux/radix-tree.h>
#include <linux/mutex.h>
#include <linux/pci.h>
#include <linux/debugfs.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/vmalloc.h>
#include <linux/pgtable.h>
#include <linux/static_call.h>
#include <linux/uaccess.h>
#include <asm/interrupt.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/cache.h>
#include <asm/ptrace.h>
#include <asm/machdep.h>
#include <asm/udbg.h>
#include <asm/smp.h>
#include <asm/hw_irq.h>
#include <asm/softirq_stack.h>
#include <asm/ppc_asm.h>
#include <asm/paca.h>
#include <asm/firmware.h>
#include <asm/lv1call.h>
#include <asm/dbell.h>
#include <asm/trace.h>
#include <asm/cpu_has_feature.h>
int distribute_irqs = 1;
static inline void next_interrupt(struct pt_regs *regs)
{
if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) {
WARN_ON(!(local_paca->irq_happened & PACA_IRQ_HARD_DIS));
WARN_ON(irq_soft_mask_return() != IRQS_ALL_DISABLED);
}
/*
* We are responding to the next interrupt, so interrupt-off
* latencies should be reset here.
*/
lockdep_hardirq_exit();
trace_hardirqs_on();
trace_hardirqs_off();
lockdep_hardirq_enter();
}
static inline bool irq_happened_test_and_clear(u8 irq)
{
if (local_paca->irq_happened & irq) {
local_paca->irq_happened &= ~irq;
return true;
}
return false;
}
static void __replay_soft_interrupts(void)
{
struct pt_regs regs;
/*
* We use local_paca rather than get_paca() to avoid all the
* debug_smp_processor_id() business in this low level function.
*/
if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) {
WARN_ON_ONCE(mfmsr() & MSR_EE);
WARN_ON(!(local_paca->irq_happened & PACA_IRQ_HARD_DIS));
WARN_ON(local_paca->irq_happened & PACA_IRQ_REPLAYING);
}
/*
* PACA_IRQ_REPLAYING prevents interrupt handlers from enabling
* MSR[EE] to get PMIs, which can result in more IRQs becoming
* pending.
*/
local_paca->irq_happened |= PACA_IRQ_REPLAYING;
ppc_save_regs(&regs);
regs.softe = IRQS_ENABLED;
regs.msr |= MSR_EE;
/*
* Force the delivery of pending soft-disabled interrupts on PS3.
* Any HV call will have this side effect.
*/
if (firmware_has_feature(FW_FEATURE_PS3_LV1)) {
u64 tmp, tmp2;
lv1_get_version_info(&tmp, &tmp2);
}
/*
* Check if an hypervisor Maintenance interrupt happened.
* This is a higher priority interrupt than the others, so
* replay it first.
*/
if (IS_ENABLED(CONFIG_PPC_BOOK3S) &&
irq_happened_test_and_clear(PACA_IRQ_HMI)) {
regs.trap = INTERRUPT_HMI;
handle_hmi_exception(&regs);
next_interrupt(&regs);
}
if (irq_happened_test_and_clear(PACA_IRQ_DEC)) {
regs.trap = INTERRUPT_DECREMENTER;
timer_interrupt(&regs);
next_interrupt(&regs);
}
if (irq_happened_test_and_clear(PACA_IRQ_EE)) {
regs.trap = INTERRUPT_EXTERNAL;
do_IRQ(&regs);
next_interrupt(&regs);
}
if (IS_ENABLED(CONFIG_PPC_DOORBELL) &&
irq_happened_test_and_clear(PACA_IRQ_DBELL)) {
regs.trap = INTERRUPT_DOORBELL;
doorbell_exception(&regs);
next_interrupt(&regs);
}
/* Book3E does not support soft-masking PMI interrupts */
if (IS_ENABLED(CONFIG_PPC_BOOK3S) &&
irq_happened_test_and_clear(PACA_IRQ_PMI)) {
regs.trap = INTERRUPT_PERFMON;
performance_monitor_exception(&regs);
next_interrupt(&regs);
}
local_paca->irq_happened &= ~PACA_IRQ_REPLAYING;
}
void replay_soft_interrupts(void)
{
irq_enter(); /* See comment in arch_local_irq_restore */
__replay_soft_interrupts();
irq_exit();
}
#if defined(CONFIG_PPC_BOOK3S_64) && defined(CONFIG_PPC_KUAP)
static inline void replay_soft_interrupts_irqrestore(void)
{
unsigned long kuap_state = get_kuap();
/*
* Check if anything calls local_irq_enable/restore() when KUAP is
* disabled (user access enabled). We handle that case here by saving
* and re-locking AMR but we shouldn't get here in the first place,
* hence the warning.
*/
kuap_assert_locked();
if (kuap_state != AMR_KUAP_BLOCKED)
set_kuap(AMR_KUAP_BLOCKED);
__replay_soft_interrupts();
if (kuap_state != AMR_KUAP_BLOCKED)
set_kuap(kuap_state);
}
#else
#define replay_soft_interrupts_irqrestore() __replay_soft_interrupts()
#endif
notrace void arch_local_irq_restore(unsigned long mask)
{
unsigned char irq_happened;
/* Write the new soft-enabled value if it is a disable */
if (mask) {
irq_soft_mask_set(mask);
return;
}
if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) {
WARN_ON_ONCE(in_nmi());
WARN_ON_ONCE(in_hardirq());
WARN_ON_ONCE(local_paca->irq_happened & PACA_IRQ_REPLAYING);
}
again:
/*
* After the stb, interrupts are unmasked and there are no interrupts
* pending replay. The restart sequence makes this atomic with
* respect to soft-masked interrupts. If this was just a simple code
* sequence, a soft-masked interrupt could become pending right after
* the comparison and before the stb.
*
* This allows interrupts to be unmasked without hard disabling, and
* also without new hard interrupts coming in ahead of pending ones.
*/
asm_volatile_goto(
"1: \n"
" lbz 9,%0(13) \n"
" cmpwi 9,0 \n"
" bne %l[happened] \n"
" stb 9,%1(13) \n"
"2: \n"
RESTART_TABLE(1b, 2b, 1b)
: : "i" (offsetof(struct paca_struct, irq_happened)),
"i" (offsetof(struct paca_struct, irq_soft_mask))
: "cr0", "r9"
: happened);
if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
WARN_ON_ONCE(!(mfmsr() & MSR_EE));
/*
* If we came here from the replay below, we might have a preempt
* pending (due to preempt_enable_no_resched()). Have to check now.
*/
preempt_check_resched();
return;
happened:
irq_happened = READ_ONCE(local_paca->irq_happened);
if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
WARN_ON_ONCE(!irq_happened);
if (irq_happened == PACA_IRQ_HARD_DIS) {
if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG))
WARN_ON_ONCE(mfmsr() & MSR_EE);
irq_soft_mask_set(IRQS_ENABLED);
local_paca->irq_happened = 0;
__hard_irq_enable();
preempt_check_resched();
return;
}
/* Have interrupts to replay, need to hard disable first */
if (!(irq_happened & PACA_IRQ_HARD_DIS)) {
if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) {
if (!(mfmsr() & MSR_EE)) {
/*
* An interrupt could have come in and cleared
* MSR[EE] and set IRQ_HARD_DIS, so check
* IRQ_HARD_DIS again and warn if it is still
* clear.
*/
irq_happened = READ_ONCE(local_paca->irq_happened);
WARN_ON_ONCE(!(irq_happened & PACA_IRQ_HARD_DIS));
}
}
__hard_irq_disable();
local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
} else {
if (IS_ENABLED(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG)) {
if (WARN_ON_ONCE(mfmsr() & MSR_EE))
__hard_irq_disable();
}
}
/*
* Disable preempt here, so that the below preempt_enable will
* perform resched if required (a replayed interrupt may set
* need_resched).
*/
preempt_disable();
irq_soft_mask_set(IRQS_ALL_DISABLED);
trace_hardirqs_off();
/*
* Now enter interrupt context. The interrupt handlers themselves
* also call irq_enter/exit (which is okay, they can nest). But call
* it here now to hold off softirqs until the below irq_exit(). If
* we allowed replayed handlers to run softirqs, that enables irqs,
* which must replay interrupts, which recurses in here and makes
* things more complicated. The recursion is limited to 2, and it can
* be made to work, but it's complicated.
*
* local_bh_disable can not be used here because interrupts taken in
* idle are not in the right context (RCU, tick, etc) to run softirqs
* so irq_enter must be called.
*/
irq_enter();
replay_soft_interrupts_irqrestore();
irq_exit();
if (unlikely(local_paca->irq_happened != PACA_IRQ_HARD_DIS)) {
/*
* The softirq processing in irq_exit() may enable interrupts
* temporarily, which can result in MSR[EE] being enabled and
* more irqs becoming pending. Go around again if that happens.
*/
trace_hardirqs_on();
preempt_enable_no_resched();
goto again;
}
trace_hardirqs_on();
irq_soft_mask_set(IRQS_ENABLED);
local_paca->irq_happened = 0;
__hard_irq_enable();
preempt_enable();
}
EXPORT_SYMBOL(arch_local_irq_restore);
/*
* This is a helper to use when about to go into idle low-power
* when the latter has the side effect of re-enabling interrupts
* (such as calling H_CEDE under pHyp).
*
* You call this function with interrupts soft-disabled (this is
* already the case when ppc_md.power_save is called). The function
* will return whether to enter power save or just return.
*
* In the former case, it will have notified lockdep of interrupts
* being re-enabled and generally sanitized the lazy irq state,
* and in the latter case it will leave with interrupts hard
* disabled and marked as such, so the local_irq_enable() call
* in arch_cpu_idle() will properly re-enable everything.
*/
bool prep_irq_for_idle(void)
{
/*
* First we need to hard disable to ensure no interrupt
* occurs before we effectively enter the low power state
*/
__hard_irq_disable();
local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
/*
* If anything happened while we were soft-disabled,
* we return now and do not enter the low power state.
*/
if (lazy_irq_pending())
return false;
/* Tell lockdep we are about to re-enable */
trace_hardirqs_on();
/*
* Mark interrupts as soft-enabled and clear the
* PACA_IRQ_HARD_DIS from the pending mask since we
* are about to hard enable as well as a side effect
* of entering the low power state.
*/
local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS;
irq_soft_mask_set(IRQS_ENABLED);
/* Tell the caller to enter the low power state */
return true;
}
#ifdef CONFIG_PPC_BOOK3S
/*
* This is for idle sequences that return with IRQs off, but the
* idle state itself wakes on interrupt. Tell the irq tracer that
* IRQs are enabled for the duration of idle so it does not get long
* off times. Must be paired with fini_irq_for_idle_irqsoff.
*/
bool prep_irq_for_idle_irqsoff(void)
{
WARN_ON(!irqs_disabled());
/*
* First we need to hard disable to ensure no interrupt
* occurs before we effectively enter the low power state
*/
__hard_irq_disable();
local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
/*
* If anything happened while we were soft-disabled,
* we return now and do not enter the low power state.
*/
if (lazy_irq_pending())
return false;
/* Tell lockdep we are about to re-enable */
trace_hardirqs_on();
return true;
}
/*
* Take the SRR1 wakeup reason, index into this table to find the
* appropriate irq_happened bit.
*
* Sytem reset exceptions taken in idle state also come through here,
* but they are NMI interrupts so do not need to wait for IRQs to be
* restored, and should be taken as early as practical. These are marked
* with 0xff in the table. The Power ISA specifies 0100b as the system
* reset interrupt reason.
*/
#define IRQ_SYSTEM_RESET 0xff
static const u8 srr1_to_lazyirq[0x10] = {
0, 0, 0,
PACA_IRQ_DBELL,
IRQ_SYSTEM_RESET,
PACA_IRQ_DBELL,
PACA_IRQ_DEC,
0,
PACA_IRQ_EE,
PACA_IRQ_EE,
PACA_IRQ_HMI,
0, 0, 0, 0, 0 };
void replay_system_reset(void)
{
struct pt_regs regs;
ppc_save_regs(&regs);
regs.trap = 0x100;
get_paca()->in_nmi = 1;
system_reset_exception(&regs);
get_paca()->in_nmi = 0;
}
EXPORT_SYMBOL_GPL(replay_system_reset);
void irq_set_pending_from_srr1(unsigned long srr1)
{
unsigned int idx = (srr1 & SRR1_WAKEMASK_P8) >> 18;
u8 reason = srr1_to_lazyirq[idx];
/*
* Take the system reset now, which is immediately after registers
* are restored from idle. It's an NMI, so interrupts need not be
* re-enabled before it is taken.
*/
if (unlikely(reason == IRQ_SYSTEM_RESET)) {
replay_system_reset();
return;
}
if (reason == PACA_IRQ_DBELL) {
/*
* When doorbell triggers a system reset wakeup, the message
* is not cleared, so if the doorbell interrupt is replayed
* and the IPI handled, the doorbell interrupt would still
* fire when EE is enabled.
*
* To avoid taking the superfluous doorbell interrupt,
* execute a msgclr here before the interrupt is replayed.
*/
ppc_msgclr(PPC_DBELL_MSGTYPE);
}
/*
* The 0 index (SRR1[42:45]=b0000) must always evaluate to 0,
* so this can be called unconditionally with the SRR1 wake
* reason as returned by the idle code, which uses 0 to mean no
* interrupt.
*
* If a future CPU was to designate this as an interrupt reason,
* then a new index for no interrupt must be assigned.
*/
local_paca->irq_happened |= reason;
}
#endif /* CONFIG_PPC_BOOK3S */
/*
* Force a replay of the external interrupt handler on this CPU.
*/
void force_external_irq_replay(void)
{
/*
* This must only be called with interrupts soft-disabled,
* the replay will happen when re-enabling.
*/
WARN_ON(!arch_irqs_disabled());
/*
* Interrupts must always be hard disabled before irq_happened is
* modified (to prevent lost update in case of interrupt between
* load and store).
*/
__hard_irq_disable();
local_paca->irq_happened |= PACA_IRQ_HARD_DIS;
/* Indicate in the PACA that we have an interrupt to replay */
local_paca->irq_happened |= PACA_IRQ_EE;
}
static int __init setup_noirqdistrib(char *str)
{
distribute_irqs = 0;
return 1;
}
__setup("noirqdistrib", setup_noirqdistrib);