blob: b2eede5531c8fab5840e8e0bb75944f350773ced [file] [log] [blame]
/*
* arch/arm/mach-ep93xx/clock.c
* Clock control for Cirrus EP93xx chips.
*
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/io.h>
#include <asm/clkdev.h>
#include <asm/div64.h>
#include <mach/hardware.h>
/*
* The EP93xx has two external crystal oscillators. To generate the
* required high-frequency clocks, the processor uses two phase-locked-
* loops (PLLs) to multiply the incoming external clock signal to much
* higher frequencies that are then divided down by programmable dividers
* to produce the needed clocks. The PLLs operate independently of one
* another.
*/
#define EP93XX_EXT_CLK_RATE 14745600
#define EP93XX_EXT_RTC_RATE 32768
struct clk {
unsigned long rate;
int users;
int sw_locked;
u32 enable_reg;
u32 enable_mask;
unsigned long (*get_rate)(struct clk *clk);
};
static unsigned long get_uart_rate(struct clk *clk);
static struct clk clk_uart1 = {
.sw_locked = 1,
.enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
.enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U1EN,
.get_rate = get_uart_rate,
};
static struct clk clk_uart2 = {
.sw_locked = 1,
.enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
.enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U2EN,
.get_rate = get_uart_rate,
};
static struct clk clk_uart3 = {
.sw_locked = 1,
.enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
.enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U3EN,
.get_rate = get_uart_rate,
};
static struct clk clk_pll1;
static struct clk clk_f;
static struct clk clk_h;
static struct clk clk_p;
static struct clk clk_pll2;
static struct clk clk_usb_host = {
.enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
.enable_mask = EP93XX_SYSCON_CLOCK_USH_EN,
};
/* DMA Clocks */
static struct clk clk_m2p0 = {
.enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
.enable_mask = 0x00020000,
};
static struct clk clk_m2p1 = {
.enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
.enable_mask = 0x00010000,
};
static struct clk clk_m2p2 = {
.enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
.enable_mask = 0x00080000,
};
static struct clk clk_m2p3 = {
.enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
.enable_mask = 0x00040000,
};
static struct clk clk_m2p4 = {
.enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
.enable_mask = 0x00200000,
};
static struct clk clk_m2p5 = {
.enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
.enable_mask = 0x00100000,
};
static struct clk clk_m2p6 = {
.enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
.enable_mask = 0x00800000,
};
static struct clk clk_m2p7 = {
.enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
.enable_mask = 0x00400000,
};
static struct clk clk_m2p8 = {
.enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
.enable_mask = 0x02000000,
};
static struct clk clk_m2p9 = {
.enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
.enable_mask = 0x01000000,
};
static struct clk clk_m2m0 = {
.enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
.enable_mask = 0x04000000,
};
static struct clk clk_m2m1 = {
.enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
.enable_mask = 0x08000000,
};
#define INIT_CK(dev,con,ck) \
{ .dev_id = dev, .con_id = con, .clk = ck }
static struct clk_lookup clocks[] = {
INIT_CK("apb:uart1", NULL, &clk_uart1),
INIT_CK("apb:uart2", NULL, &clk_uart2),
INIT_CK("apb:uart3", NULL, &clk_uart3),
INIT_CK(NULL, "pll1", &clk_pll1),
INIT_CK(NULL, "fclk", &clk_f),
INIT_CK(NULL, "hclk", &clk_h),
INIT_CK(NULL, "pclk", &clk_p),
INIT_CK(NULL, "pll2", &clk_pll2),
INIT_CK(NULL, "usb_host", &clk_usb_host),
INIT_CK(NULL, "m2p0", &clk_m2p0),
INIT_CK(NULL, "m2p1", &clk_m2p1),
INIT_CK(NULL, "m2p2", &clk_m2p2),
INIT_CK(NULL, "m2p3", &clk_m2p3),
INIT_CK(NULL, "m2p4", &clk_m2p4),
INIT_CK(NULL, "m2p5", &clk_m2p5),
INIT_CK(NULL, "m2p6", &clk_m2p6),
INIT_CK(NULL, "m2p7", &clk_m2p7),
INIT_CK(NULL, "m2p8", &clk_m2p8),
INIT_CK(NULL, "m2p9", &clk_m2p9),
INIT_CK(NULL, "m2m0", &clk_m2m0),
INIT_CK(NULL, "m2m1", &clk_m2m1),
};
int clk_enable(struct clk *clk)
{
if (!clk->users++ && clk->enable_reg) {
u32 value;
value = __raw_readl(clk->enable_reg);
if (clk->sw_locked)
__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
__raw_writel(value | clk->enable_mask, clk->enable_reg);
}
return 0;
}
EXPORT_SYMBOL(clk_enable);
void clk_disable(struct clk *clk)
{
if (!--clk->users && clk->enable_reg) {
u32 value;
value = __raw_readl(clk->enable_reg);
if (clk->sw_locked)
__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
__raw_writel(value & ~clk->enable_mask, clk->enable_reg);
}
}
EXPORT_SYMBOL(clk_disable);
static unsigned long get_uart_rate(struct clk *clk)
{
u32 value;
value = __raw_readl(EP93XX_SYSCON_CLOCK_CONTROL);
if (value & EP93XX_SYSCON_CLOCK_UARTBAUD)
return EP93XX_EXT_CLK_RATE;
else
return EP93XX_EXT_CLK_RATE / 2;
}
unsigned long clk_get_rate(struct clk *clk)
{
if (clk->get_rate)
return clk->get_rate(clk);
return clk->rate;
}
EXPORT_SYMBOL(clk_get_rate);
static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
static char pclk_divisors[] = { 1, 2, 4, 8 };
/*
* PLL rate = 14.7456 MHz * (X1FBD + 1) * (X2FBD + 1) / (X2IPD + 1) / 2^PS
*/
static unsigned long calc_pll_rate(u32 config_word)
{
unsigned long long rate;
int i;
rate = EP93XX_EXT_CLK_RATE;
rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */
rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */
do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */
for (i = 0; i < ((config_word >> 16) & 3); i++) /* PS */
rate >>= 1;
return (unsigned long)rate;
}
static void __init ep93xx_dma_clock_init(void)
{
clk_m2p0.rate = clk_h.rate;
clk_m2p1.rate = clk_h.rate;
clk_m2p2.rate = clk_h.rate;
clk_m2p3.rate = clk_h.rate;
clk_m2p4.rate = clk_h.rate;
clk_m2p5.rate = clk_h.rate;
clk_m2p6.rate = clk_h.rate;
clk_m2p7.rate = clk_h.rate;
clk_m2p8.rate = clk_h.rate;
clk_m2p9.rate = clk_h.rate;
clk_m2m0.rate = clk_h.rate;
clk_m2m1.rate = clk_h.rate;
}
static int __init ep93xx_clock_init(void)
{
u32 value;
int i;
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
if (!(value & 0x00800000)) { /* PLL1 bypassed? */
clk_pll1.rate = EP93XX_EXT_CLK_RATE;
} else {
clk_pll1.rate = calc_pll_rate(value);
}
clk_f.rate = clk_pll1.rate / fclk_divisors[(value >> 25) & 0x7];
clk_h.rate = clk_pll1.rate / hclk_divisors[(value >> 20) & 0x7];
clk_p.rate = clk_h.rate / pclk_divisors[(value >> 18) & 0x3];
ep93xx_dma_clock_init();
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
if (!(value & 0x00080000)) { /* PLL2 bypassed? */
clk_pll2.rate = EP93XX_EXT_CLK_RATE;
} else if (value & 0x00040000) { /* PLL2 enabled? */
clk_pll2.rate = calc_pll_rate(value);
} else {
clk_pll2.rate = 0;
}
clk_usb_host.rate = clk_pll2.rate / (((value >> 28) & 0xf) + 1);
printk(KERN_INFO "ep93xx: PLL1 running at %ld MHz, PLL2 at %ld MHz\n",
clk_pll1.rate / 1000000, clk_pll2.rate / 1000000);
printk(KERN_INFO "ep93xx: FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
clk_f.rate / 1000000, clk_h.rate / 1000000,
clk_p.rate / 1000000);
for (i = 0; i < ARRAY_SIZE(clocks); i++)
clkdev_add(&clocks[i]);
return 0;
}
arch_initcall(ep93xx_clock_init);